Crystal-Phase-Selective Etching of Heterophase Au Nanostructures.

Selective oxidative etching is one of the most effective ways to prepare hollow nanostructures and nanocrystals with specific exposed facets. The mechanism of selective etching in noble metal nanostructures mainly relies on the different reactivity of metal components and the distinct surface energy of multimetallic nanostructures. Recently, phase engineering of nanomaterials (PEN) offers new opportunities for the preparation of unique heterostructures, including heterophase nanostructures. However, the synthesis of hollow multimetallic nanostructures based on crystal-phase-selective etching has been rarely studied. Here, a crystal-phase-selective etching method is reported to selectively etch the unconventional 4H and 2H phases in the heterophase Au nanostructures. Due to the coating of Pt-based alloy and the crystal-phase-selective etching of 4H-Au in 4H/face-centered cubic (fcc) Au nanowires, the well-defined ladder-like Au@PtAg nanoframes are prepared. In addition, the 2H-Au in the fcc-2H-fcc Au nanorods and 2H/fcc Au nanosheets can also be selectively etched using the same method. As a proof-of-concept application, the ladder-like Au@PtAg nanoframes are used for the electrocatalytic hydrogen evolution reaction (HER) in acidic media, showing excellent performance that is comparable to the commercial Pt/C catalyst.

Metal-Organic Framework-Based Hetero-Phase Nanostructure Photocatalysts with Molecular-Scale Tunable Energy Levels.

As an effective method to modulate the physicochemical properties of materials, crystal phase engineering, especially hetero-phase, plays an important role in developing high-performance photocatalysts. However, it is still a huge challenge but significant to construct porous hetero-phase nanostructures with adjustable band structures. As a kind of unique porous crystalline materials, metal-organic frameworks (MOFs) might be the appropriate candidate, but the MOF-based hetero-phase is rarely reported. Herein, we developed a secondary building unit (SBU) regulating strategy to prepare two crystal phases of Ti-MOFs constructed by titanium and 1,4-dicarboxybenzene, i.e., COK and MIL-125. Besides, COK/MIL-125 hetero-phase was further constructed. In the photocatalytic hydrogen evolution reaction, COK/MIL-125 possessed the highest H2 yield compared to COK and MIL-125, ascribing to the Z-Scheme homojunction at hetero-phase interface. Furthermore, by decorating with amino groups (i.e., NH2-COK/NH2-MIL-125), the light absorbing capacity was broadened to visible-light region, and the visible-light-driven H2 yield was greatly improved. Briefly, the MOF-based hetero-phase possesses periodic channel structures and molecularly adjustable band structures, which is scarce in traditional organic or inorganic materials. As a proof of concept, our work not only highlights the development of MOF-based hetero-phase nanostructures, but also paves a novel avenue for designing high-performance photocatalysts.

Enhancing Nitrate Reduction to Ammonia Through Crystal Phase Engineering: Unveiling the Hydrogen Bonding Effect in δ-FeOOH Electrocatalysis.

Crystal phase engineering has emerged as a powerful tool for tailoring the electrocatalytic performance, yet its impact on nitrate reduction to ammonia (NRA) remains largely uncharted territory. Herein, density functional theory (DFT) calculations are performed to unravel the influence of the crystal phase of FeOOH on the adsorption behavior of *NO3 . Inspiringly, FeOOH samples with four distinct crystal phases (δ, γ, α, and ß) are successfully synthesized and deployed as electrocatalysts for NRA. Remarkably, among all FeOOH samples, δ-FeOOH demonstrates the superior NRA performance, achieving a NH3 Faradic efficiency ( FE NH 3 $\rm{FE} _ {\rm{NH_3}}$ ) of 90.2% at -1.0 V versus reversible hydrogen electrode (RHE) and a NH3 yield rate ( Yield NH 3 $\rm{Yield} _ {\rm{NH_3}}$ ) of 5.73 mg h-1 cm-2 at -1.2 V. In-depth experiments and theoretical calculations unveil the existence of hydrogen bonding interaction between δ-FeOOH and *NOx , which not only enhances the adsorption of *NOx but also disrupts the linear relationships between the free energy of *NO3 adsorption and various parameters, including limiting potential, d-band center (εd ) and transferred charge from FeOOH to *NO3 , ultimately contributing to the exceptional NRA performance.

Crystal Phase Engineering of Ultrathin Alloy Nanostructures for Highly Efficient Electroreduction of Nitrate to Ammonia.

Electrocatalytic nitrate reduction reaction (NO3RR) toward ammonia synthesis is recognized as a sustainable strategy to balance the global nitrogen cycle. However, it still remains a great challenge to achieve highly efficient ammonia production due to the complex proton-coupled electron transfer process in NO3RR. Here, the controlled synthesis of RuMo alloy nanoflowers (NFs) with unconventional face-centered cubic (fcc) phase and hexagonal close-packed/fcc heterophase for highly efficient NO3RR is reported. Significantly, fcc RuMo NFs demonstrate high Faradaic efficiency of 95.2% and a large yield rate of 32.7 mg h-1 mgcat -1 toward ammonia production at 0 and -0.1 V (vs reversible hydrogen electrode), respectively. In situ characterizations and theoretical calculations have unraveled that fcc RuMo NFs possess the highest d-band center with superior electroactivity, which originates from the strong Ru─Mo interactions and the high intrinsic activity of the unconventional fcc phase. The optimal electronic structures of fcc RuMo NFs supply strong adsorption of key intermediates with suppression of the competitive hydrogen evolution, which further determines the remarkable NO3RR performance. The successful demonstration of high-performance zinc-nitrate batteries with fcc RuMo NFs suggests their substantial application potential in electrochemical energy supply systems.

Phase-Controlled Ruthenium Nanocrystals on Colloidal Polydopamine Supports and Their Catalytic Behaviors in Aerobic Oxidation Reactions.

The past decade has witnessed rapidly growing interest in noble metal nanostructures adopting unconventional metastable crystal phases. In the case of Ru, chemically synthesized nanocrystals typically form thermodynamically favored hexagonal close-packed (hcp) crystal lattices, whereas it remains significantly more challenging to synthesize Ru nanocrystals in the metastable face-centered cubic (fcc) phase. In this work, we have synthesized polydopamine (PDA)-supported hcp and fcc Ru nanocrystals in a phase-selective manner through one-pot thermal reduction of appropriate Ru(III) precursors in a polyol solvent. Benefiting from the unique surface-adhesion function of PDA, we have been able to grow phase-controlled sub-5 nm Ru nanocrystals directly on colloidal PDA supports without prefunctionalizing the particle surfaces with any molecular linkers or surface-capping ligands. Success in phase-controlled synthesis of capping ligand-free Ru nanocrystals dispersed on the same support material enables us to systematically compare the intrinsic mass-specific and surface-specific activities of fcc and hcp Ru nanocatalysts toward the aerobic oxidation of a chromogenic molecular substrate, 3,3',5,5'-tetramethylbenzidine (TMB), under a broad range of reaction conditions. We use UV-vis absorption spectroscopy to monitor the conversion of the reactant molecules into the one-electron and two-electron oxidation products in real time during Ru-catalyzed oxidation of TMB, which is found to be a mechanistically complex molecule-transforming process involving multiple elementary steps. The apparent reaction rates and detailed kinetic features are observed to be not only intimately related to the crystalline structures of the Ru nanocatalysts but also profoundly influenced by several other critical factors, such as the pH of the reaction medium, the initial concentration of TMB, Ru coverage on the PDA supports, and degree of nanoparticle aggregation.

Crystal phase engineering of nanoflower-like hollow MoSe2boosting polysulfide conversion for lithium-sulfur batteries.

The battery performance of sulfur cathode has obviously depended on the redox reaction kinetics of polysulfides upon cycling. Herein, an effective strategy was proposed to achieve the conversion from 2H (semiconductor phase) to 1T (metal phase) in hollow nano-flowered molybdenum selenide sphere (HFSMS) through crystal phase engineering. The HFSMS with different phase ratio was realized by regulating the proportion of reducing agents. Specifically, the 1T phase content can reach up to 60.8%, and then subsequently decreased to 59.1% with the further increase of the reducing agent. The as-prepared HFSMS with the 1T phase content of 60.8% showed a smallest Tafel slopes (49.99 and 79.65 mV/dec in reduction and oxidation process, respectively), fastest response time and highest response current (520 s, 0.459 mA in Li2S deposition test), which further exhibited excellent catalytic activity and faster reaction kinetics. This result was verified by electrochemical performance, which manifested as stable cycle life with only 0.112% capacity decay per cycle. It was found that the hollow structure can ensures a rich sulfur storage space, and effectually buffer the volume changes of the active substance. More importantly, the improved performance is attributed to the introduction of the 1T phase, which significantly improves the catalytic activity of MoSe2with promoting the polysulfide conversion.

Crystal phase engineering boosted photo-electrochemical kinetics of CoSe2 for oxygen evolution catalysis.

Crystal phase is an important parameter that can determine the electronic structure and catalytic properties of catalysts. In this work, we report the crystal phase dependent photo- and electrocatalytic oxygen evolution reaction (OER) performance of CoSe2. In electrocatalytic reaction, we firstly found that CoSe2 with orthorhombic phase (o-CoSe2) showed a higher OER performance than that of CoSe2 with cubic phase (c-CoSe2). In the further exploration of photocatalytic application using Fe2O3 as light harvester and CoSe2 as cocatalysts, o-CoSe2/Fe2O3 can realize the qualitative changes of photocatalytic oxygen evolution performance from "0″ to "1". As contrast, c-CoSe2/Fe2O3 cannot work in photocatalytic oxygen evolution process under the same condition. Experimental and theoretical analysis uncover that, the key factor leading to the crystal phase-dependent performance is the decreased activation barrier of H2O on o-CoSe2 surface. This work opens up an opportunity of correlating the CoSe2 crystal phase with performance in OER.

Crystal Phase-Controlled Modulation of Binary Transition Metal Oxides for Highly Reversible Li-O2 Batteries.

Reducing charge-discharge overpotential of transition metal oxide catalysts can eventually enhance the cell efficiency and cycle life of Li-O2 batteries. Here, we propose that crystal phase engineering of transition metal oxides could be an effective way to achieve the above purpose. We establish controllable crystal phase modulation of the binary MnxCo1-xO by adopting a cation regulation strategy. Systematic studies reveal an unprecedented relevancy between charge overpotential and crystal phase of MnxCo1-xO catalysts, whereas a dramatically reduced charge overpotential (0.48 V) via a rational optimization of Mn/Co molar ratio = 8/2 is achieved. Further computational studies indicate that the different morphologies of Li2O2 should be related to different electronic conductivity and binding of Li2O2 on crystal facets of MnxCo1-xO catalysts, finally leading to different charge overpotential. We anticipate that this specific crystal phase engineering would offer good technical support for developing high-performance transition metal oxide catalysts for advanced Li-O2 batteries.

Cd-Rich Alloyed CsPb1- x Cd x Br3 Perovskite Nanorods with Tunable Blue Emission and Fermi Levels Fabricated through Crystal Phase Engineering.

One-dimensional semiconductor nanostructures have already been used for a variety of optoelectronic applications. Metal halide perovskites have emerged in recent years as promising high-performance optoelectronic materials, but reports on 1D nanorods (NRs) of all-inorganic halide perovskites are still scarce. This work demonstrates a synthetic strategy toward cesium-based inorganic perovskite NRs by exploiting composition-controlled crystal phase engineering. It is accomplished for Cd-rich mixed-cation CsPb1- x Cd x Br3 nanocrystals, where the initial 1D hexagonal perovskite phase drives the growth of the 1D NRs, as supported by first-principles calculations. The band gaps of the resulting NRs are tunable by varying the Cd-content, and the highly uniform CsPb0.08Cd0.92Br3 NRs (with an average length of 84 nm and width of 16 nm) exhibit a true blue-color emission centered at 460 nm, with a high quantum yield of 48%. Moreover, this work also demonstrates the tunability of the Fermi levels in the films made of CsPb1- x Cd x Br3 alloyed nanocrystals, where samples with highest Cd content show an increase of the electron concentration and a related increase in the conductivity.

Crystal-Phase-Engineered PdCu Electrocatalyst for Enhanced Ammonia Synthesis.

Crystal phase engineering is a powerful strategy for regulating the performance of electrocatalysts towards many electrocatalytic reactions, while its impact on the nitrogen electroreduction has been largely unexplored. Herein, we demonstrate that structurally ordered body-centered cubic (BCC) PdCu nanoparticles can be adopted as active, selective, and stable electrocatalysts for ammonia synthesis. Specifically, the BCC PdCu exhibits excellent activity with a high NH3 yield of 35.7 µg h-1 mg-1 cat , Faradaic efficiency of 11.5 %, and high selectivity (no N2 H4 is detected) at -0.1 V versus reversible hydrogen electrode, outperforming its counterpart, face-centered cubic (FCC) PdCu, and most reported nitrogen reduction reaction (NRR) electrocatalysts. It also exhibits durable stability for consecutive electrolysis for five cycles. Density functional theory calculation reveals that strong orbital interactions between Pd and neighboring Cu sites in BCC PdCu obtained by structure engineering induces an evident correlation effect for boosting up the Pd 4d electronic activities for efficient NRR catalysis. Our findings open up a new avenue for designing active and stable electrocatalysts towards NRR.

Size-Dependent Phase Transformation of Noble Metal Nanomaterials.

As an important aspect of crystal phase engineering, controlled crystal phase transformation of noble metal nanomaterials has emerged as an effective strategy to explore novel crystal phases of nanomaterials. In particular, it is of significant importance to observe the transformation pathway and reveal the transformation mechanism in situ. Here, the phase transformation behavior of face-centered cubic (fcc) Au nanoparticles (fcc-AuNPs), adhering to the surface of 4H nanodomains in 4H/fcc Au nanorods, referred to as 4H-AuNDs, during in situ transmission electron microscopy imaging is systematically studied. It is found that the phase transformation is dependent on the ratio of the size of the monocrystalline nanoparticle (NP) to the diameter of 4H-AuND. Furthermore, molecular dynamics simulation and theoretical modeling are used to explain the experimental results, giving a size-dependent phase transformation diagram which provides a general guidance to predict the phase transformation pathway between fcc and 4H Au nanomaterials. Impressively, this method is general, which is used to study the phase transformation of other metal NPs, such as Pd, Ag, and PtPdAg, adhering to 4H-AuNDs. The work opens an avenue for selective phase engineering of nanomaterials which may possess unique physicochemical properties and promising applications.

Syntheses and Properties of Metal Nanomaterials with Novel Crystal Phases.

In recent decades, researchers have devoted tremendous effort into the rational design and controlled synthesis of metal nanomaterials with well-defined size, morphology, composition, and structure, and great achievements have been reached. However, the crystal-phase engineering of metal nanomaterials still remains a big challenge. Recent research has revealed that the crystal phase of metal nanomaterials can significantly alter their properties, arising from the distinct atomic arrangement and modified electronic structure. Until now, it has been relatively uncommon to synthesize metal nanomaterials with novel crystal phases in spite of the fact that these nanostructures would be promising for various applications. Here, the research progress regarding the fine control of noble metal (Au, Ag, Ru, Rh, Pd) and non-noble metal (Fe, Co, Ni) nanomaterials with novel crystal phases is reviewed. First, synthesis strategies and their phase transformations are summarized, while highlighting the peculiar characteristics of each element. The phase-dependent properties are then discussed by providing representative examples. Finally, the challenges and perspectives in this emerging field are proposed.

Crystal-Phase Quantum Wires: One-Dimensional Heterostructures with Atomically Flat Interfaces.

In semiconductor quantum-wire heterostructures, interface roughness leads to exciton localization and to a radiative decay rate much smaller than that expected for structures with flat interfaces. Here, we uncover the electronic and optical properties of the one-dimensional extended defects that form at the intersection between stacking faults and inversion domain boundaries in GaN nanowires. We show that they act as crystal-phase quantum wires, a novel one-dimensional quantum system with atomically flat interfaces. These quantum wires efficiently capture excitons whose radiative decay gives rise to an optical doublet at 3.36 eV at 4.2 K. The binding energy of excitons confined in crystal-phase quantum wires is measured to be more than twice larger than that of the bulk. As a result of their unprecedented interface quality, these crystal-phase quantum wires constitute a model system for the study of one-dimensional excitons.

New Insights into the Origins of Sb-Induced Effects on Self-Catalyzed GaAsSb Nanowire Arrays.

Ternary semiconductor nanowire arrays enable scalable fabrication of nano-optoelectronic devices with tunable bandgap. However, the lack of insight into the effects of the incorporation of Vy element results in lack of control on the growth of ternary III-V(1-y)Vy nanowires and hinders the development of high-performance nanowire devices based on such ternaries. Here, we report on the origins of Sb-induced effects affecting the morphology and crystal structure of self-catalyzed GaAsSb nanowire arrays. The nanowire growth by molecular beam epitaxy is changed both kinetically and thermodynamically by the introduction of Sb. An anomalous decrease of the axial growth rate with increased Sb2 flux is found to be due to both the indirect kinetic influence via the Ga adatom diffusion induced catalyst geometry evolution and the direct composition modulation. From the fundamental growth analyses and the crystal phase evolution mechanism proposed in this Letter, the phase transition/stability in catalyst-assisted ternary III-V-V nanowire growth can be well explained. Wavelength tunability with good homogeneity of the optical emission from the self-catalyzed GaAsSb nanowire arrays with high crystal phase purity is demonstrated by only adjusting the Sb2 flux.