Changes in the Articular Cartilage Thickness in Patients with Symptomatic Rotator Cuff Tears: A Prospective Study with a Mean 5-Year Follow-Up.

Objectives: The purpose of this study was to prospectively investigate the progression of cartilage thinning in patients with symptomatic rotator cuff tears using MRI. Methods: Two hundred twenty-five consecutive patients with symptomatic rotator cuff tears visited our institute between 2009 and 2019. Of these, 28 shoulders of 27 patients (mean age, 65 years) who underwent at least two magnetic resonance imaging (MRI) examinations were prospectively enrolled. They all received conservative treatment. The mean follow-up was 67 months. Changes in cartilage thickness and the combined cartilage and subchondral bone thickness at the initial and final MRI were measured using a RadiAnt DICOM-viewer (Medixant, Poznan, Poland). The cartilage thickness of the humeral head was measured in the oblique coronal and sagittal images. The glenoid cartilage was measured in the axial and oblique coronal images. Results: At an average period of 5 years, 12 of 28 shoulders (42%) showed more than a 30% decrease in cartilage thickness in the humeral head. The glenoid showed cartilage thinning in only one shoulder (4%). In the humeral head, progressive cartilage thinning was seen mainly in the anterior and posterior parts of the humeral head in the sagittal plane. In the glenoid, progressive cartilage thinning was seen on the entire surface except the posterior area. There was no significant difference in cartilage thickness between the first and final follow-ups for both the humeral head and the glenoid. Conclusions: A total of 12 of 28 shoulders (42%) showed more than a 30% decrease in cartilage thickness in the humeral head, which was mainly observed in the anterior and posterior areas of the humeral head.

Instability after reverse shoulder arthroplasty: a retrospective review of thirty one cases.

PURPOSE: A retrospectively analyze of instability after RSA in terms of aetiology, treatment and final functional outcome. METHODS: A bicentric retrospective study of 31 patients (mean age 67.6 years; 42-83) treated for RSA instability using RSA Arrow System (FH Orthopedics, Mulhouse, France), mean follow-up 41months (range 12-158). Aetiologies for dislocation were evaluated using a previously described classification system for RSA instability. Actions performed during the Revision Surgeries were analyzed and grouped into five categories. Clinical outcome measures included range of motion, SSV, VAS, Constant-Murley scores, satisfaction level and recurrence of instability. RESULTS: The most frequent aetiology for RSA instability was loss of compression (18), followed by impingement (8) and loss containment (5). Total RSA revision (bipolar procedure) involving both distalization and lateralization occurred in 13 instances. Isolated distalization through the humerus was performed in ten patients and Isolated lateralization through the glenoid in three patients. Three cases of components exchange due to mechanical failure were noted. Bone graft was used in nine instances. Three patients (10%) suffered recurrent instability following Revision Surgery and required an additional stabilizing procedure. At final follow-up all 31 RSA were reported as stable with a mean VAS of 1.1, SSV 54.5%, constant score 48.3, constant ponderate 74.9%. CONCLUSION: The management of unstable RSA represent a challenge that can be successfully overcome with a revision surgery with compromised functional results. Loss of compression was the most common cause for primary and recurrent RSA instability that were treated principally with bipolar revisions involving component lateralization and distalization.

The acetabularization index: a novel measure of acromial bone loss prior to reverse shoulder arthroplasty.

BACKGROUND: Acromial stress fractures following reverse shoulder arthroplasty (RSA) have gained attention among specialized surgeons over the past decades craving answers regarding predisposing factors and technical aspects as how to avoid the complication. This study introduces the acetabularization index (AI) for the preoperative estimation of acromial bone loss attributed to acetabularization in cases of cuff tear arthropathy (CTA). METHODS: The acromiohumeral interval (AHI), extent of acromial acetabularization (AA), acromial height (AH), and width of acetabularization (r) were measured on preoperative radiographs and two-dimensional computed tomography scans (2D CT) of patients who underwent RSA within the timeline 2019-2023 for CTA. The AI calculated AI % = AA mm ÷ AH mm . The CTA grade was determined according to the Hamada classification. The AI values on radiographs and 2D CT were compared by a Student's t-test. Possible correlation between the AI and AHI was investigated via Pearson's coefficient. The intraclass correlation coefficient (ICC) was employed to test the interobserver reliability among two independent testers. RESULTS: The radiographs and 2D CT scans of thirty-three patients who underwent RSA were analyzed. The mean AHI, AH, AA, r, and AI values on radiographs were 5.5 ± 2 mm, 10 ± 2 mm, 2 ± 2 mm, 30 ± 4 mm, 16 ± 16%, respectively. On 2D CT, the corresponding mean values were 4.7 ± 2.5 mm, 10.8 ± 2.65 mm, 2.45 ± 2.35 mm, and 30 ± 4.5, and 22.3 ± 22%, respectively. There was a statistically significant difference between the AI values on radiographs and 2D CT (P = .000). The Pearson's correlation coefficient demonstrated a negative correlation between AI and AHI (r = - 0.33). Excellent reliability was observed by the ICC values for all parameters in both groups among two testers. CONCLUSION: The AI is a reliably measurable tool on radiographs and 2D CT scans; however, the measurements derived from radiographs vary significantly from CT based measurements due to projection restrictions. Grade IVB of the Hamada/Fukuda classification is associated with the highest AI values. Further research is warranted to assess the clinical utility of this index as a predictive tool for postoperative acromial stress fractures.

Rotator Cuff Arthropathy: A Comprehensive Review.

Rotator cuff arthropathy is a spectrum of disease states secondary to full-thickness cuff tears classified by rotator cuff insufficiency and degenerative disease within the shoulder joint. Diagnosis can be made through standard physical exam and radiographic films demonstrating varying levels of weakness, along with acetabularization, femoralization, and superior migration of the humeral head. Severity of disease is classified through both the Hamada and Seebauer grading systems, which are used clinically to determine the appropriate treatment algorithm. Treatment exists along the spectrum from conservative therapy with physical therapy to a definitive treatment with total joint replacement. Depending on a patient's progression and other comorbidities, arthroscopic treatments may additionally be used in specific circumstances as joint-sparing techniques. In recent years, reverse total shoulder arthroplasty has produced increasingly favorable outcomes with improvements in pain and function while simultaneously diminishing complication rates, making it generally accepted as standard of care. This disease limits quality of life for a large population of patients and efforts toward optimization of the treatment regimen is critical. This review provides an overview on the diagnostic criteria, classification, pathoanatomic changes, biomechanics, treatment options, outcomes, and complications of rotator cuff arthropathy.

Current Role of Reverse Total Shoulder Arthroplasty in the Management of Glenohumeral Osteoarthritis.

Reverse total shoulder arthroplasty (RSA) was historically reserved for the elderly, low-demand patient with rotator cuff arthropathy (RCA) or as a salvage procedure after failed primary arthroplasty. Surgeon expertise and the advancement of implant design has allowed RSA to now become commonplace not only for RCA but also for glenohumeral osteoarthritis. RSA provides a robust glenoid baseplate fixation, which allows for easier and more reliable bone grafting or augmentation when needed. For patients with severe glenoid bone loss, RSA has been shown to have superior or equivalent patient-reported outcomes and shoulder range of motion when compared with total shoulder arthroplasty.

Zoledronate alleviates subchondral bone collapse and articular cartilage degeneration in a rat model of rotator cuff tear arthropathy.

OBJECTIVE: To evaluate the humeral head bone volume of patients with cuff tear arthropathy (CTA) and examine the therapeutic effect of zoledronate in a rat modified model of CTA (mCTA). DESIGN: The bone mass in patients with CTA was measured using Hounsfield units from CT images. The mCTA was induced by transecting the rotator cuff, biceps brachii tendon, and superior half of the joint capsule in adult rat shoulders. A single subcutaneous injection of zoledronate was followed by bone histomorphometry and immunohistochemistry of the humeral head, as well as the Murine Shoulder Arthritis Score (MSAS) assessment. RESULTS: The humeral head bone volume was decreased in patients with CTA. In the mCTA model, M1 macrophages were increased in the synovium and were decreased by zoledronate treatment. The increased expressions of TNF-α, IL-1ß and IL-6 in mCTA synovium and articular cartilage were suppressed in the zoledronate-treated mCTA group. The expression of catabolic enzymes in the articular cartilage and MSAS showed similar results. The zoledronate-treated mCTA group showed a decreased subchondral bone collapse with a decreased RANKL/OPG expression ratio and a suppressed number of osteoclasts compared with the control mCTA group. The enhanced expressions of HMGB1 and S100A9 in the mCTA shoulders were eliminated in the zoledronate-treated mCTA group. CONCLUSIONS: The humeral head subchondral bone was decreased in patients with CTA. In the mCTA model, the collapse and osteoarthritic changes were prevented by zoledronate administration. Zoledronate seemed to suppress the number of M1 macrophages in the synovium and osteoclasts in the subchondral bone.

Superior Capsular Reconstruction using the Long Head of Biceps Tendon: A Biomechanical Assessment of Tenodesis Location and Angle of Fixation.

BACKGROUND: Massive irreparable rotator cuff tears (MIRCT) treated with superior capsular reconstruction (SCR) using the long head of the biceps tendon have shown satisfactory early results. Different techniques and positions for biceps tenodesis have been described. This study aimed to evaluate the effect of tenodesis location and glenohumeral fixation angle for graft tensioning on the biomechanics of a SCR using a single strand biceps technique. METHODS: Eight cadaveric shoulders were mounted to a custom biomechanical simulator which employed static tone loads to the deltoid and rotator cuff muscles. All cadavers were first tested in the intact condition, and then in the simulated MIRCT condition by sectioning the tendinous insertions of the supraspinatus and upper border of the infraspinatus. SCR using the long head of the biceps tendon was then evaluated. Three biceps tenodesis locations relative to the greater tuberosity (anterior, middle, and posterior) and two glenohumeral fixation angles (0° and 30°) for graft tensioning were tested. An optical tracking system was used to quantify superior-inferior (SI) and anterior-posterior (AP) humeral head translation relative to the glenoid, while the functional abduction force was quantified using a load sensor. All tests were conducted at 0°, 30° and 60° of glenohumeral abduction in a randomized fashion. RESULTS: When assessing isolated superior humeral head migration, all biceps tenodesis locations were effective at decreasing superior migration, with no tenodesis location significantly better than the other (P=0.213). However, biceps grafts tensioned at 30° of glenohumeral abduction were significantly better at reducing proximal humeral migration as compared to graft tensioning at 0° abduction (P=0.008). Posterior humeral head translation observed in the MIRCT condition was significantly reduced when tensioning the biceps tendon at 30° of glenohumeral abduction compared to 0° for all tenodesis locations (P≤0.043). Tenodesis location also significantly influenced posterior humeral head translation (P=0.001), with middle and posterior positions restoring near normal humeral head position when fixed at 30° glenohumeral abduction. All SCR techniques using the biceps tendon improved the functional abduction force relative to the MIRCT condition, although no statistically significant differences were observed relative to the intact condition (P≥0.448). DISCUSSION: SCR using the long head biceps tendon is biomechanically effective in reducing posterosuperior translation of the humeral head in the setting of a MIRCT. Graft tensioning and fixation at 30° of glenohumeral abduction combined with either a middle or posterior tenodesis location on the greater tuberosity most effectively restores near normal time-zero humeral head kinematics.

Stemless reverse shoulder arthroplasty neck shaft angle influences humeral component time-zero fixation and survivorship: a cadaveric biomechanical assessment.

Background: Stemless humeral components are being clinically investigated for reverse shoulder arthroplasty (RSA) procedures. There is, however, a paucity of basic science literature on the surgical parameters that influence the success of these procedures. Therefore, this cadaveric biomechanical study evaluated the neck shaft angle (NSA) of implantation on the survivability and performance of stemless RSA humeral components during cyclical loading. Methods: Twelve paired cadaveric humeri were implanted with stemless RSA humeral components at NSAs of 135° and 145°. Implant-bone motion at the periphery of the implant was measured with 3 optical machine vision USB3 cameras outfitted with c-mount premium lenses and quantified with ProAnalyst software. A custom 3-dimensional loading apparatus was used to cyclically apply 3 loading directions representative of physiological states at 5 progressively increasing loading magnitudes. Stemless 135° and 145° implants were compared based on the maximum implant-bone relative distraction detected, as well as the survivorship of the implants throughout the loading protocol. Results: Primary fixation and implant biomechanical survivorship were substantially better in the 145° NSA implants. The 135° NSA implants elicited significantly higher implant-bone distractions during cyclical loading (P = .001), and implant survivorship was considerably lower in the 135° NSA specimens when compared to the 145° NSA specimens (135° NSA: 0%, 145° NSA: 50%) (P < .001). Conclusion: NSA is a modifiable parameter that influences time-zero implant stability, as well as the early survivorship of the stemless RSA humeral components tested in this study. NSA resections of 145° appear to promote better stability than those utilizing 135° NSAs during early postoperative eccentric loads. Further studies are required to assess if other stemless reversed humeral implant designs have improved time-zero fixation at higher NSAs.

Defining pseudoparalysis and pseudoparesis: a consensus study.

BACKGROUND: The purpose of this study was to establish consensus statements via a modified Delphi process on the definition of shoulder pseudoparalysis and pseudoparesis. METHODS: A consensus process on the definition of a diagnosis of pseudoparalysis utilizing a modified Delphi technique was conducted, and 26 shoulder/sports surgeons from 11 countries, selected based on their level of expertise in the field, participated in these consensus statements. Consensus was defined as achieving 80%-89% agreement, whereas strong consensus was defined as 90%-99% agreement, and unanimous consensus was indicated by 100% agreement with a proposed statement. RESULTS: Three statements regarding the diagnosis of pseudoparalysis reached strong (>89%) consensus: passive range of motion should be unaffected, the passive range of abduction should not be considered, and diagnosis should be excluded if lidocaine injection produces a substantial improvement in range of motion. Additionally, consensus (>79%) was reached that the active range of external rotation should not be considered for diagnosis, pain as a cause of restricted motion must be excluded, and that distinctions between restricted active flexion and external rotation should be made by range of motion rather than tear characteristics. No consensus could be reached on statements regarding the size, number of tendons or chronicity of cuff tears. Nor was there agreement on the active range of flexion permitted or on the difference between pseudoparalysis and pseudoparesis. CONCLUSION: A modified Delphi process was utilized to establish consensus on the definition of shoulder pseudoparalysis and pseudoparesis. Unfortunately, almost half of the statements did not reach consensus, and agreement could not be reached across all domains for a unifying definition for the diagnosis of pseudoparalysis in the setting of rotator cuff tears. Furthermore, it was not agreed how or whether pseudoparalysis should be differentiated from pseudoparesis. Based on the lack of a consensus for these terms, studies should report explicitly how these terms are defined when they are used.

Defining patient satisfaction after reverse total shoulder arthroplasty: a systematic review.

BACKGROUND: The prevalence of reverse total shoulder arthroplasty (rTSA) has grown rapidly. As indications for the procedure expand, the proportion of patients who have satisfactory outcomes after rTSA has not been well defined. This systematic literature review explores overall patient satisfaction after rTSA and defines patient satisfaction based on indication for surgery. METHODS: A literature search was performed for studies describing patient satisfaction after rTSA in accordance with Preferred Reporting Items for Systematic Review and Meta-Analysis guidelines. Papers were included if they investigated patient satisfaction after rTSA at a minimum of 2-year follow-up. Data were collected on patient demographics, including age, gender, and body mass index. Follow-up duration, indication for surgery, and patient reported outcome measures relating to patient satisfaction were also recorded. RESULTS: There were a total of 5234 patients and 5288 shoulders from the 45 included studies. The overall study population was 61.2% female and the average age was 71.1 years (range 23-99). Satisfaction results were recorded at final follow-up, with average follow-up of 49.1 months (range 24-228). Overall patient satisfaction ranged from 77.7% to 87.8%, depending on patient satisfaction patient reported outcome measures. When stratified by diagnosis, patients with a diagnosis of glenohumeral osteoarthritis (GHOA) rated better satisfaction on all metrics when compared to patients with a diagnosis of cuff tear arthropathy or massive rotator cuff tear. CONCLUSION: This systematic review demonstrated that patients who undergo rTSA for either GHOA, cuff tear arthropathy, or massive rotator cuff tear are generally satisfied with their procedure, with the rate of satisfaction highest in GHOA. Focusing on patient satisfaction may provide the best overall assessment of health care quality in a very understandable and tangible form. Overall satisfaction rate is valuable information for patient education and can be utilized as part of effective surgical counseling.

Reverse shoulder arthroplasty for patients with cuff tear arthropathy: do clinical outcomes differ by inlay vs. onlay design?

BACKGROUND: The influence of position of the humeral tray (inlay or onlay) on clinical outcomes in reverse shoulder arthroplasty (RSA) is a topic of debate. The purpose of this study was to compare clinical and radiographic outcomes of patients with cuff tear arthropathy treated with RSA systems with inlay or onlay humeral tray design, similar neck-shaft angles, and lateralized glenospheres. METHODS: This was a retrospective study of prospectively obtained data from 1 tertiary care center. We identified all patients who underwent primary RSA between 2009 and 2017 (N = 511). We included 102 patients with diagnosed cuff tear arthropathy treated with RSA prostheses with a lateralized glenosphere and 135° neck-shaft angle (with either an inlay or onlay humeral tray design) who had a minimum of 2 years of follow-up (mean, 44 months; range, 24-125 months). Sixty-three patients (62%) had an inlay humeral tray (inlay group) and 39 (38%) had an onlay tray (onlay group). All patients underwent preoperative and postoperative evaluations, including measures of patient-reported outcomes (PROs), shoulder range of motion (ROM) testing, and radiographic imaging. Clinical relevance of changes in PROs and ROM was evaluated using published values for minimal clinically important differences. RESULTS: The 2 groups did not differ by demographic characteristics except for a higher proportion of women in the inlay group (75%) than in the onlay group (56%) (P = .04). Preoperative PROs and ROM were not significantly different between groups. At final follow-up, PROs and ROM were not different between groups in terms of statistical significance or clinical relevance. We found no significant differences in the rate of baseplate loosening (inlay, 3.2% vs. onlay, 5.1%, P = .63), revision surgery (inlay, 0% vs. onlay 5.1%, P = .07), acromial stress fracture (inlay, 3.2% vs. onlay, 5.1%, P = .63), prosthesis dislocation (inlay, 0% vs. onlay, 2.6%, P = .20), or scapular notching (inlay, 21% vs. onlay, 7.7%, P = .08). CONCLUSION: At 2-year minimum follow-up, the position of the humeral tray in RSA prostheses (either inlay or onlay) for cuff tear arthropathy was not associated with PROs, shoulder ROM, or rates of complications, including baseplate loosening, acromial stress fracture, and scapular notching.

A scapular statistical shape model can reliably predict premorbid glenoid morphology in conditions of severe glenoid bone loss.

BACKGROUND: Knowledge of premorbid glenoid parameters at the time of shoulder arthroplasty, such as inclination, version, joint line position, height, and width, can assist with implant selection, implant positioning, metal augment sizing, and/or bone graft dimensions. The objective of this study was to validate a scapular statistical shape model (SSM) in predicting patient-specific glenoid morphology in scapulae with clinically relevant glenoid erosion patterns. METHODS: Computed tomography scans of 30 healthy scapulae were obtained and used as the control group. Each scapula was then virtually eroded to create 7 erosion patterns (Walch A1, A2, B2, B3, D, Favard E2, and E3). This resulted in 210 uniquely eroded glenoid models, forming the eroded glenoid group. A scapular SSM, created from a different database of 85 healthy scapulae, was then applied to each eroded scapula to predict the premorbid glenoid morphology. The premorbid glenoid inclination, version, height, width, radius of best-fit sphere, and glenoid joint line position were automatically calculated for each of the 210 eroded glenoids. The mean values for all outcome variables were compared across all erosion types between the healthy, eroded, and SSM-predicted groups using a 2-way repeated measures analysis of variance. RESULTS: The SSM was able to predict the mean premorbid glenoid parameters of the eroded glenoids with a mean absolute difference of 3° ± 2° for inclination, 3° ± 2° for version, 2 ± 1 mm for glenoid height, 2 ± 1 mm for glenoid width, 5 ± 4 mm for radius of best-fit sphere, and 1 ± 1 mm for glenoid joint line. The mean SSM-predicted values for inclination, version, height, width, and radius were not significantly different than the control group (P > .05). DISCUSSION: An SSM has been developed that can reliably predict premorbid glenoid morphology and glenoid indices in patients with common glenoid erosion patterns. This technology can serve as a useful template to visually represent the premorbid healthy glenoid in patients with severe glenoid bony erosions. Knowledge of the premorbid glenoid preoperatively can assist with implant selection, positioning, and sizing.

Long-term outcomes of hemiarthroplasty using a smaller head combined with rotator cuff reconstruction in patients with cuff-tear arthropathy.

Background: Hemiarthroplasty (HHR) using a smaller head with rotator cuff reconstruction is a treatment option for cuff-tear arthropathy, offering advantages like facilitating rotator cuff-tear closure, increasing the lever arm of deltoid, and restoring function in irreparable cuff tears. This study aimed to evaluate the long-term outcomes of this procedure. Methods: A retrospective analysis was conducted for 91 shoulders undergoing HHR using a smaller head with rotator cuff reconstruction between May 2005 and September 2012. Surgery involved reducing the size of humeral head and performing rotator cuff reconstruction based on the site of the deficient rotator cuff. The study analyzed University of California, Los Angeles shoulder scores, Japanese Orthopaedics Association shoulder scores, range of motion, and postoperative radiographs. Results: Twenty-eight patients, divided into an elderly group (14 women, 2 men, mean age 74.5 ± 3.8 years) and a younger group (6 women, 6 men, mean age 63.5 ± 3.1 years) were followed up for a mean of 133.2 ± 14.1 months. No complications were reported. The clinical scores and range of motion significantly improved postoperatively and remained over 10 years. Radiographs revealed high incidence of glenoid wear (82.1%), bone resorption (43%) and cranial humeral head migration (54%), with no prosthesis loosening. Conclusion: We believe that HHR using a smaller head with rotator cuff reconstruction is a surgical technique that can maintain stable long-term outcomes in both elderly and younger individuals with cuff-tear arthropathy.

Trends in Shoulder Arthroplasty in Germany: A 10-Year Epidemiological Analysis of Patients with Primary Osteoarthritis of the Shoulder.

Shoulder arthroplasty has significantly gained popularity in orthopedic surgery, driven by progress in prosthesis design and surgical techniques. This study explored the epidemiology of shoulder arthroplasty, analyzing healthcare data from 2012 to 2022 for primary osteoarthritis of the shoulder. The data included patient demographics and types of surgical procedures. Data analysis indicates a higher utilization rate of reverse total shoulder arthroplasty (RTSA; n = 41,251) over total- (TSA; n = 18,679) and hemiarthroplasty (HSA; n = 12,827) for primary shoulder osteoarthritis. Overall, a significant increase in RTSA procedures from n = 2237 (2012) to n = 5415 (2022) was observed, representing more than a two-fold increase of 121.1%. The relative proportion of RTSA among all types of shoulder arthroplasty increased from 39% (2012) to 68.6% (2022), while HSA decreased and TSA essentially remained constant. Age analysis identified the following peaks: RTSA, 77 ± 7 y; HSA, 68 ± 12 y; and TSA, 67 ± 10 y. Among the over 60s, significantly more women were treated with any type of prosthesis, whereas in young patients (45 to 59 y), more men received HSA or TSA. Our study confirms that RTSA has become the preferred choice for elderly patients in Germany, reflecting the prevailing preference despite varying patient ages and conditions, with a noted difference in sex in treatment prevalence.

Biomechanical Characteristics of Glenosphere Orientation Based on Tilting Angle and Overhang Changes in Reverse Shoulder Arthroplasty.

Background: Glenoid position and inclination are important factors in protecting against scapular notching, which is the most common complication that directly affects the longevity of reverse shoulder arthroplasty (RSA). This study aimed to investigate the biomechanical characteristics of glenosphere orientation, comparing neutral tilt, inferior overhang with an eccentric glenosphere at the same placement of baseplate, and inferior tilt after 10° inferior reaming in the lower part of the glenoid in RSA. Methods: Nine cadaveric shoulders were tested with 5 combinations of customized glenoid components: a centric glenosphere was combined with a standard baseplate (group A); an eccentric glenosphere to provide 4-mm inferior overhang than the centric glenosphere was combined with a standard baseplate (group B); a centric glenosphere was combined with a wedge-shaped baseplate tilted inferiorly by 10° with the same center of rotation (group C); an eccentric glenosphere was attached to a wedge-shaped baseplate (group D); and 10° inferior reaming was performed on the lower part of the glenoid to apply 10° inferior tilt, with a centric glenosphere secured to the standard baseplate for simulation of clinical tilt (group E). Impingement-free angles for adduction, abduction, forward flexion, external rotation, and internal rotation were measured. The capability of the deltoid moment arm for abduction and forward flexion, deltoid length, and geometric analysis for adduction engagement were evaluated. Results: Compared with neutral tilt, inferior tilt at the same position showed no significant difference in impingement-free angle, moment arm capability, and deltoid length. However, group D resulted in better biomechanical properties than a central position, regardless of inferior tilt. Group E demonstrated a greater range of adduction, internal and external rotation, and higher abduction and forward flexion capability with distalization, compared to corresponding parameters for inferior tilt with a customized wedge-shaped baseplate. Conclusions: A 10° inferior tilt of the glenosphere, without changing the position of the baseplate, had no benefit in terms of the impingement-free angle and deltoid moment arm. However, an eccentric glenosphere had a significant advantage, regardless of inferior tilt. Inferior tilt through 10° inferior reaming showed better biomechanical results than neutral tilt due to the distalization effect.

Can we accelerate rehabilitation following reverse shoulder arthroplasty? A systematic review.

Background: There is no consensus concerning the rehabilitation protocol following reverse shoulder arthroplasty. Several patients are expecting to be able to use their arms for sports or recreation shortly after their operation. Methods: This review was designed as an intervention systematic review with narrative analysis. Authors searched English literature in PubMed and Embase databases from 1/1/1989 until July 2022. Controlled studies comparing rehabilitation protocols for patients undergoing reverse shoulder arthroplasty were included. Data quality was examined with the Cochrane risk of a bias assessment tool for randomized trials, the Methodological Index for Non-Randomized studies (MINORS) tool, as well as the Grading of Recommendations Assessment Development and Evaluation (GRADE) approach. Results: Three studies were finally analyzed. At 3 months post-op, forward flexion was found to be significantly higher in the early rehabilitation group (140.5, 95% confidence intervals (CIs): 135.10-145.89; the delayed rehabilitation group mean was 131.24, 95% CI: 125.73-136.74; p = 0.019). Twelve months post-op, no significant difference in any clinical or patient-reported outcome was shown. More complications were reported in the 6 weeks-delayed rehabilitation group. Discussion: Newer regimes permit immediate shoulder mobilization but may not be applied to every patient. The lack of strong evidence warrants the need for future controlled studies; subsequently, postoperative rehabilitation should be individualized.

Comparison of Functional Outcomes and Complications of Inlay and Onlay Reverse Shoulder Arthroplasty in Neer Type 4 Proximal Humerus Fractures and Cuff Tear Arthropathy: A Multicentric Study.

Background: This multicenter retrospective study was conducted with the objective of comparing the outcomes and complications between inlay and onlay reverse shoulder arthroplasty (RSA) in patients presenting Neer Type 4 proximal humerus fractures and cuff tear arthropathy. The primary aim of this investigation was to assess and juxtapose the clinical as well as functional outcomes of individuals who underwent onlay reverse shoulder arthroplasty with those who underwent inlay reverse shoulder arthroplasty. Methods: A retrospective cohort study was conducted, involving patients who had undergone reverse shoulder arthroplasty between the period of 2016 and 2022. The study divided the population into two groups: Group A received inlay humeral components, while Group B received onlay humeral components. Functional outcomes were evaluated using the American Shoulder and Elbow Surgeons (ASES) and Constant scores. Range of motion, infection, periprosthetic fractures, and nerve injuries were also assessed. Results: The study included 67 patients in Group A and 62 patients in Group B. Group A had significantly better functional outcomes, as indicated by higher ASES and Constant scores (p < 0.05). Group A also had greater shoulder joint motion (p < 0.05). Periprosthetic fractures were significantly more common in Group B (p < 0.05). However, complication rates, including infection and instability, did not significantly differ between the groups (p > 0.05). Nerve injuries occurred in both groups, with slightly higher occurrence in Group B. Conclusion: Inlay humeral components in reverse shoulder arthroplasty for Neer Type 4 fractures and cuff tear arthropathy resulted in better functional outcomes, increased range of motion, and lower incidence of periprosthetic fractures compared to onlay components. Onlay components showed potential advantages in reducing instability rates. Further studies with larger samples and standardized protocols are needed to confirm these findings.

The effect of cuff arthropathy stage on sleep disturbance and kinesiophobia in reverse shoulder arthroplasty patients.

BACKGROUND: The current study aimed to determine the changes in pre-and post-operative Pittsburg sleep quality index (PSQI) and Tampa scale of kinesiophobia (TSK) values ​​according to the Hamada classification in patients who underwent reverse shoulder arthroplasty (RSA) for rotator cuff tear arthropathy (RCTA). METHODS: One hundred and eight patients who underwent RSA for RCTA were reviewed retrospectively. The patients were divided into two groups with low grade (stages 1-2-3) (n = 49) and high grade (stages 4a-4b-5) (n = 59) according to the Hamada classification, which is the radiographic evaluation of RCTA. PSQI and TSK values ​​were calculated preoperatively, and post-operatively at the 6th week, 6th month, and 1st year. The change in PSQI and TSK values ​​between the evaluations and the effect of staging according to the Hamada classification on this change was examined. RESULTS: When compared in preoperative evaluations, PSQI and TSK scores were found to be lower in low-grade group 1 (7.39 ± 1.56, 51.88 ± 4.62, respectively) than in high-grade group 2 (10.47 ± 2.39, 57.05 ± 3.25, respectively) according to Hamada classification (both p < 0.001). In the postoperative evaluations, PSQI and TSK results decreased gradually compared to the preoperative evaluations, and there was a severe decrease in both parameters between the 6th-week and 6th-month evaluations (both p < 0.001). Preoperatively, 102 (95%) patients had sleep disturbance (PSQI ≥ 6), and 108 (100%) patients had high kinesiophobia (TSK > 37). In the 1st year follow-ups, sleep disturbance was observed in 5 (5%) patients and kinesiophobia in 1 (1%) patient. When the Hamada stages were compared, it was seen that there was a significant difference before the operation (both p < 0.001), but the statistically significant difference disappeared in the PSQI value in the 1st year (p = 0.092) and in the TSK value in the 6th month (p = 0.164) post-operatively. It was observed that Hamada staging caused significant differences in PSQI and TSK values ​​in the preoperative period but did not affect the clinical results after treatment. CONCLUSIONS: RSA performed based on RCTA improves sleep quality and reduces kinesiophobia. RCTA stage negatively affects PSQI and TSK before the operation but does not show any effect after the treatment.

Neuropathy of the suprascapular and axillary nerves in rotator cuff arthropathy: a prospective electrodiagnostic study.

PURPOSE: Prevalence of axillary (AN) and/or suprascapular (SSN) neuropathy in rotator cuff tear arthropathy (RCTA) is unknown. We aimed to prospectively evaluate for preoperative neurodiagnostic abnormalities in order to determine their prevalence, location, and influence on reverse shoulder arthroplasty (RSA) outcomes. METHODS: Patients who underwent RSA for RCTA were prospectively included. An electromyography and nerve conduction study were performed pre and post-surgery. Clinical situation: VAS, Relative Constant-Murley Score (rCMS) and ROM over a minimum of two years follow-up. RESULTS: Forty patients met the inclusion criteria; mean follow-up was 28.4 months (SD 4.4). Injuries in RCTA were present in 83.9% (77.4% in AN and 45.2% in SSN). There were no differences on preoperative VAS, ROM, and rCMS between patients with and without preoperative nerve injuries. Four acute postoperative neurological injuries were registered under chronic preoperative injuries. Six months after RSA, 69% of preoperative neuropathies had improved (82.14% chronic injuries and 77.7% disuse injuries). No differences in improvement between disuse and chronic injuries were found, but patients with preoperative neuropathy that had not improved at the postoperative electromyographic study at six months, scored worse on the VAS (1.44 vs 2.66; p .14) and rCMS (91.6 vs 89.04; p .27). CONCLUSIONS: The frequency of axillary and suprascapular neuropathies in RCTA is much higher than expected. Most of these injuries improve after surgery, with almost complete neurophysiological recovery and little functional impact on RSA. However, those patients with preoperative neuropathies and absence of neurophysiological improvement six months after surgery have lower functional results.