Deep Learning-Assisted Label-Free Parallel Cell Sorting with Digital Microfluidics.

Sorting specific cells from heterogeneous samples is important for research and clinical applications. In this work, a novel label-free cell sorting method is presented that integrates deep learning image recognition with microfluidic manipulation to differentiate cells based on morphology. Using an Active-Matrix Digital Microfluidics (AM-DMF) platform, the YOLOv8 object detection model ensures precise droplet classification, and the Safe Interval Path Planning algorithm manages multi-target, collision-free droplet path planning. Simulations and experiments revealed that detection model precision, concentration ratios, and sorting cycles significantly affect recovery rates and purity. With HeLa cells and polystyrene beads as samples, the method achieved 98.5% sorting precision, 96.49% purity, and an 80% recovery over three cycles. After a series of experimental validations, this method can also be used to sort HeLa cells from red blood cells, cancer cells from white blood cells (represented by HeLa and Jurkat cells), and differentiate white blood cell subtypes (represented by HL-60 cells and Jurkat cells). Cells sorted using this method can be lysed directly on chip within their hosting droplets, ensuring minimal sample loss and suitability for downstream bioanalysis. This innovative AM-DMF cell sorting technique holds significant potential to advance diagnostics, therapeutics, and fundamental research in cell biology.

Antifouling slippery liquid infused porous surface for surfactant-free PCR on digital microfluidics platform.

Digital microfluidics technology has immense potential for multiplexing biological processes, reducing reagents, and minimizing process time. However, biofouling of surfaces causes cross-contamination, slow droplet movement, and prolonged experiment time, hindering its full potential. Traditionally surfactants are used to combat this issue but can interfere with biological reactions leading to low efficiency. An alternative is the use of slippery liquid-infused porous surfaces (SLIPS), which do not interfere with the reactions and offer a solution to the biofouling problem. In this study, we compare Teflon surfaces with SLIPS to address the challenge of biofouling in Digital MicroFluidic (DMF) devices. More specifically, we demonstrate that SLIPS in an Electrowetting-on-Dielectric (EWOD)-based DMF device not only prevents biofouling but also enhances PCR efficiency, reducing reaction times and reagent consumption. These advancements eliminate the need for surfactants, which can interfere with biological reactions, thereby ensuring higher fidelity in PCR amplification. Our findings reveal that SLIPS facilitate faster droplet movement and maintain reaction integrity, showcasing their potential for high-throughput biological assays.

Resonant oscillation of droplets under an alternating electric field to enhance solute diffusion.

This study investigates a novel microfluidic mixing technique that uses the resonant oscillation of coalescent droplets. During the vertical contact-separation process, solutes are initially separated as a result of the combined effects of diffusion and gravity. We show that the application of alternating current (AC) voltage to microelectrodes below the droplets causes a resonant oscillation, which enhances the even distribution of the solute. The difference in concentration between the top and bottom droplets exhibits frequency dependence and indicates the existence of a particular AC frequency that results in a homogeneous concentration. This frequency corresponds to the resonance frequency of the droplet oscillation that is determined using particle tracking velocimetry. To understand the mixing process, a phenomenological model based on the equilibrium between surface tension, viscosity, and electrostatic force was developed. This model accurately predicted the resonance frequency of droplet flow and was consistent with the experimental results. These results suggest that the resonant oscillation of droplets driven by AC voltage significantly enhances the diffusion of solutes, which is an effective approach to microfluid mixing.

DMF-ChIP-seq for Highly Sensitive and Integrated Epigenomic Profiling of Low-Input Cells.

Mapping genome-wide DNA-protein interactions (DPIs) provides insights into the epigenetic landscape of complex biological systems and elucidates the mechanisms of epigenetic regulation in biological progress. However, current technologies in DPI profiling still suffer from high cell demands, low detection sensitivity, and large reagent consumption. To address these problems, we developed DMF-ChIP-seq that builds on digital microfluidic (DMF) technology to profile genome-wide DPIs in a highly efficient, cost-effective, and user-friendly way. The entire workflow including cell pretreatment, antibody recognition, pA-Tn5 tagmentation, fragment enrichment, and PCR amplification is programmatically manipulated on a single chip. Leveraging closed submicroliter reaction volumes and a superhydrophobic interface, DMF-ChIP-seq presented higher sensitivity in peak enrichment than other current methods, with high accuracy (Pearson Correlation Coefficient (PCC) > 0.86) and high repeatability (PCC > 0.92). Furthermore, DMF-ChIP-seq was capable of processing the samples with as few as 8 cells while maintaining a high signal-to-noise ratio. By applying DMF-ChIP-seq, H3K27ac histone modification of early embryonic cells during differentiation was profiled for the investigation of epigenomic landscape dynamics. With the benefits of high efficiency and sensitivity in DPI analysis, the system provides great promise in studying epigenetic regulation during various biological processes.

Toward Analysis at the Point of Need: A Digital Microfluidic Approach to Processing Multi-Source Sexual Assault Samples.

Forensic case samples collected in sexual assaults typically contain DNA from multiple sources, which complicates short-tandem repeat (STR) profiling. These samples are typically sent to a laboratory to separate the DNA from sperm and non-sperm sources prior to analysis. Here, the automation and miniaturization of these steps using digital microfluidics (DMF) is reported, which may eventually enable processing sexual assault samples outside of the laboratory, at the point of need. When applied to vaginal swab samples collected up to 12 h post-coitus (PC), the new method identifies single-source (male) STR profiles. When applied to samples collected 24-72 h PC, the method identifies mixed STR profiles, suggesting room for improvement and/or potential for data deconvolution. In sum, an automated, miniaturized sample pre-processing method for separating the DNA contained in sexual assault samples is demonstrated. This type of automated processing using DMF, especially when combined with Rapid DNA Analysis, has the potential to be used for processing of sexual assault samples in hospitals, police offices, and other locations outside of the laboratory.

Thin-Film Transistor Digital Microfluidics Circuit Design with Capacitance-Based Droplet Sensing.

With the continuous expansion of pixel arrays in digital microfluidics (DMF) chips, precise droplet control has emerged as a critical issue requiring detailed consideration. This paper proposes a novel capacitance-based droplet sensing system for thin-film transistor DMF. The proposed circuit features a distinctive inner and outer dual-pixel electrode structure, integrating droplet driving and sensing functionalities. Discharge occurs exclusively at the inner electrode during droplet sensing, effectively addressing droplet perturbation in existing sensing circuits. The circuit employs a novel fan-shaped structure of thin-film transistors. Simulation results show that it can provide a 48 V pixel voltage and demonstrate a sensing voltage difference of over 10 V between deionized water and silicone oil, illustrating its proficiency in droplet driving and accurate sensing. The stability of threshold voltage drift and temperature was also verified for the circuit. The design is tailored for integration into active matrix electrowetting-on-dielectric (AM-EWOD) chips, offering a novel approach to achieve precise closed-loop control of droplets.

DNA-DISK: Automated end-to-end data storage via enzymatic single-nucleotide DNA synthesis and sequencing on digital microfluidics.

In the age of information explosion, the exponential growth of digital data far exceeds the capacity of current mainstream storage media. DNA is emerging as a promising alternative due to its higher storage density, longer retention time, and lower power consumption. To date, commercially mature DNA synthesis and sequencing technologies allow for writing and reading of information on DNA with customization and convenience at the research level. However, under the disconnected and nonspecialized mode, DNA data storage encounters practical challenges, including susceptibility to errors, long storage latency, resource-intensive requirements, and elevated information security risks. Herein, we introduce a platform named DNA-DISK that seamlessly streamlined DNA synthesis, storage, and sequencing on digital microfluidics coupled with a tabletop device for automated end-to-end information storage. The single-nucleotide enzymatic DNA synthesis with biocapping strategy is utilized, offering an ecofriendly and cost-effective approach for data writing. A DNA encapsulation using thermo-responsive agarose is developed for on-chip solidification, not only eliminating data clutter but also preventing DNA degradation. Pyrosequencing is employed for in situ and accurate data reading. As a proof of concept, DNA-DISK successfully stored and retrieved a musical sheet file (228 bits) with lower write-to-read latency (4.4 min of latency per bit) as well as superior automation compared to other platforms, demonstrating its potential to evolve into a DNA Hard Disk Drive in the future.

A digital microfluidic device integrated with electrochemical sensor and 3D matrix for detecting soluble PD-L1.

PD1/PD-L1 checkpoint inhibitors are at the forefront of cancer immunotherapies. However, the overall response rate remains only 10-30%. Even among initial responders, drug resistance often occurs, which can lead to prolonged use of a futile therapy in the race with the fatal disease. It would be ideal to closely monitor key indicators of patients' immune responsiveness, such as circulating PD-L1 levels. Traditional PD-L1 detection methods, such as ELISA, are limited in sensitivity and rely on core lab facilities, preventing their use for the regular monitoring. Electrochemical sensors exist as an attractive candidate for point-of-care tool, yet, streamlining multiple processes in a single platform remains a challenge. To overcome this challenge, this work integrated electrochemical sensor arrays into a digital microfluidic device to combine their distinct merits, so that soluble PD-L1 (sPD-L1) molecules can be rapidly detected in a programmed and automated manner. This new platform featured microscale electrochemical sensor arrays modified with electrically conductive 3D matrix, and can detect as low as 1 pg/mL sPD-L1 with high specificity. The sensors also have desired repeatability and can obtain reproducible results on different days. To demonstrate the functionality of the device to process more complex biofluids, we used the device to detect sPD-L1 molecules secreted by human breast cancer cell line in culture media directly and observed 2X increase in signal compared with control experiment. This novel platform holds promise for the close monitoring of sPD-L1 level in human physiological fluids to evaluate the efficacy of PD-1/PD-L1 immunotherapy.

Rapid and sensitive detection of heart-type fatty acid binding protein using aggregation-induced emission nanoparticles on digital microfluidics workstation.

Early and rapid diagnostic of acute myocardial infarction (AMI) during its developing stage is crucial due to its high fatality rate. Heart-type fatty acid binding protein (h-FABP) is an ideal biomarker for the quantitative diagnosis of AMI, surpassing traditional markers such as myoglobin, creatine phosphokinase-MB, and troponin in terms of sensitivity, specificity, and prognostic value. To obtain diagnostic and prognostic information, a precise and fully quantitative measurement of h-FABP is essential, typically achieved through an immunosorbent assay like the enzyme-linked immunosorbent assay. Nevertheless, this method has several limitations, including extended detection time, complex assay procedures, the necessity for skilled technicians, and challenges in implementing automated detection. This research introduces a novel biosensor, utilizing aggregation-induced emission nanoparticles (AIENPs) and integrated with a digital microfluidic (DMF) workstation, designed for the sensitive, rapid, and automated detection of h-FABP in low-volume serum samples. AIENPs and magnetic beads in nanoscale were served as the capture particles and the fluorescent probe, which were linked covalently to anti-h-FABP antibodies respectively. The approach was based on a sandwich immunoassay and performed on a fully automated DMF workstation with assay time by 15 min. We demonstrated the determination of h-FABP in serum samples with detection limit of 0.14 ng/mL using this biosensor under optimal condition. Furthermore, excellent correlations (R2 = 0.9536, n = 50) were obtained between utilizing this biosensor and commercialized ELISA kits in clinical serum detecting. These results demonstrate that our flexible and reliable biosensor is suitable for direct integration into clinical diagnostics, and it is expected to be promising diagnostic tool for early detection and screening tests as well as prognosis evaluation for AMI patients.

Metabolic Labeling and Digital Microfluidic Single-Cell Sequencing for Single Bacterial Genotypic-Phenotypic Analysis.

Accurate assessment of phenotypic and genotypic characteristics of bacteria can facilitate comprehensive cataloguing of all the resistance factors for better understanding of antibiotic resistance. However, current methods primarily focus on individual phenotypic or genotypic profiles across different colonies. Here, a Digital microfluidic-based automated assay for whole-genome sequencing of single-antibiotic-resistant bacteria is reported, enabling Genotypic and Phenotypic Analysis of antibiotic-resistant strains (Digital-GPA). Digital-GPA can efficiently isolate and sequence antibiotic-resistant bacteria illuminated by fluorescent D-amino acid (FDAA)-labeling, producing high-quality single-cell amplified genomes (SAGs). This enables identifications of both minor and major mutations, pinpointing substrains with distinctive resistance mechanisms. Digital-GPA can directly process clinical samples to detect and sequence resistant pathogens without bacterial culture, subsequently provide genetic profiles of antibiotic susceptibility, promising to expedite the analysis of hard-to-culture or slow-growing bacteria. Overall, Digital-GPA opens a new avenue for antibiotic resistance analysis by providing accurate and comprehensive molecular profiles of antibiotic resistance at single-cell resolution.

Rapid and multi-target genotyping of Helicobacter pylori with digital microfluidics.

Helicobacter pylori (H. pylori) infection correlates closely with gastric diseases such as gastritis, ulcers, and cancer, influencing more than half of the world's population. Establishing a rapid, precise, and automated platform for H. pylori diagnosis is an urgent clinical need and would significantly benefit therapeutic intervention. Recombinase polymerase amplification (RPA)-CRISPR recently emerged as a promising molecular diagnostic assay due to its rapid detection capability, high specificity, and mild reaction conditions. In this work, we adapted the RPA-CRISPR assay on a digital microfluidics (DMF) system for automated H. pylori detection and genotyping. The system can achieve multi-target parallel detection of H. pylori nucleotide conservative genes (ureB) and virulence genes (cagA and vacA) across different samples within 30 min, exhibiting a detection limit of 10 copies/rxn and no false positives. We further conducted tests on 80 clinical saliva samples and compared the results with those derived from real-time quantitative polymerase chain reaction, demonstrating 100% diagnostic sensitivity and specificity for the RPA-CRISPR/DMF method. By automating the assay process on a single chip, the DMF system can significantly reduce the usage of reagents and samples, minimize the cross-contamination effect, and shorten the reaction time, with the additional benefit of losing the chance of experiment failure/inconsistency due to manual operations. The DMF system together with the RPA-CRISPR assay can be used for early detection and genotyping of H. pylori with high sensitivity and specificity, and has the potential to become a universal molecular diagnostic platform.

Highly Multiplexing, Throughput and Efficient Single-Cell Protein Analysis with Digital Microfluidics.

Proteins as crucial components of cells are responsible for the majority of cellular processes. Sensitive and efficient protein detection enables a more accurate and comprehensive investigation of cellular phenotypes and life activities. Here, a protein sequencing method with high multiplexing, high throughput, high cell utilization, and integration based on digital microfluidics (DMF-Protein-seq) is proposed, which transforms protein information into DNA sequencing readout via DNA-tagged antibodies and labels single cells with unique cell barcodes. In a 184-electrode DMF-Protein-seq system, ≈1800 cells are simultaneously detected per experimental run. The digital microfluidics device harnessing low-adsorbed hydrophobic surface and contaminants-isolated reaction space supports high cell utilization (>90%) and high mapping reads (>90%) with the input cells ranging from 140 to 2000. This system leverages split&pool strategy on the DMF chip for the first time to overcome DMF platform restriction in cell analysis throughput and replace the traditionally tedious bench-top combinatorial barcoding. With the benefits of high efficiency and sensitivity in protein analysis, the system offers great potential for cell classification and drug monitoring based on protein expression at the single-cell level.

Orbital Electrowetting-on-Dielectric for Droplet Manipulation on Superhydrophobic Surfaces.

Electrowetting-on-dielectric (EWOD), recognized as the most successful electrical droplet actuation method, is essential in diverse applications, ranging from thermal management to microfluidics and water harvesting. Despite significant advances, it remains challenging to achieve repeatability, high speed, and simple circuitry in EWOD-based droplet manipulation on superhydrophobic surfaces. Moreover, its efficient operation typically requires electrode arrays and sophisticated circuit control. Here, a newly observed droplet manipulation phenomenon on superhydrophobic surfaces with orbital EWOD (OEW) is reported. Due to the asymmetric electrowetting force generated on the orbit, flexible and versatile droplet manipulation is facilitated with OEW. It is demonstrated that OEW droplet manipulation on superhydrophobic surfaces exhibits higher speed (up to 5 times faster), enhanced functionality (antigravity), and manipulation of diverse liquids (acid, base, salt, organic, e.g., methyl blue, artificial blood) without contamination, and good durability after 1000 tests. It is envisioned that this robust droplet manipulation strategy using OEW will provide a valuable platform for various processes involving droplets, spanning from microfluidic devices to controllable chemical reactions. The previously unreported droplet manipulation phenomenon and control strategy shown here can potentially upgrade EWOD-based microfluidics, antifogging, anti-icing, dust removal, and beyond.

AIEgens-enhanced rapid sensitive immunofluorescent assay for SARS-CoV-2 with digital microfluidics.

BACKGROUND: Sensitive and rapid antigen detection is critical for the diagnosis and treatment of infectious diseases, but conventional ELISAs including chemiluminescence-based assays are limited in sensitivity and require many operation steps. Fluorescence immunoassays are fast and convenient but often show limited sensitivity and dynamic range. RESULTS: To address the need, an aggregation-induced emission fluorgens (AIEgens) enhanced immunofluorescent assay with beads-based quantification on the digital microfluidic (DMF) platform was developed. Portable DMF devices and chips with small electrodes were fabricated, capable of manipulating droplets within 100 nL and boosting the reaction efficiency. AIEgen nanoparticles (NPs) with high fluorescence and photostability were synthesized to enhance the test sensitivity and detection range. The integration of AIEgen probes, transparent DMF chip design, and the large magnetic beads (10 µm) as capture agents enabled rapid and direct image-taking and signal calculation of the test result. The performance of this platform was demonstrated by point-of-care quantification of SARS-CoV-2 nucleocapsid (N) protein. Within 25 min, a limit of detection of 5.08 pg mL-1 and a limit of quantification of 8.91 pg mL-1 can be achieved using <1 µL sample. The system showed high reproducibility across the wide dynamic range (10-105 pg mL-1), with the coefficient of variance ranging from 2.6% to 9.8%. SIGNIFICANCE: This rapid, sensitive AIEgens-enhanced immunofluorescent assay on the DMF platform showed simplified reaction steps and improved performance, providing insight into the small-volume point-of-care testing of different biomarkers in research and clinical applications.

Evaluation, in a highly specialised enzyme laboratory, of a digital microfluidics platform for rapid assessment of lysosomal enzyme activity in dried blood spots.

Lysosomal storage disorders (LSDs) are predominantly enzyme deficiencies leading to substrate accumulation, causing progressive damage to multiple organs. To date, a crucial part of diagnosing LSDs is measuring enzymatic activity in leucocytes, plasma, or dried blood spots (DBS). Here, we present results from a proof-of-principle study, evaluating an innovative digital microfluidics (DMF) platform, referred to as SEEKER®, that can measure the activity of the following four lysosomal enzymes from DBS: α-L-iduronidase (IDUA) for mucopolysaccharidosis I (MPS I), acid α-glucosidase (GAA) for Pompe disease, ß-glucosidase (GBA) for Gaucher disease, and α-galactosidase A (GLA) for Fabry disease. Over 900 DBS were analysed from newborns, children, and adults. DMF successfully detected known patients with MPS I, Pompe disease, and Gaucher disease, and known males with Fabry disease. This is the first demonstration of this multiplexed DMF platform for identification of patients with LSDs in a specialised diagnostic enzyme laboratory environment. We conclude that this DMF platform is relatively simple, high-throughput, and could be readily accommodated into a specialised laboratory as a first-tier test for MPS I, Pompe disease, and Gaucher disease for all patients, and Fabry disease for male patients only.

Investigation into the optoelectrowetting droplet transport mechanism.

To explore the optoelectronic wetting droplet transport mechanism, a transient numerical model of optoelectrowetting (OEW) under the coupling of flow and electric fields is established. The study investigates the impact of externally applied voltage, dielectric constant of the dielectric layer, and interfacial tension between the two phases on the dynamic behavior of droplets during transport. The proposed model employs an improved Young's equation to calculate the instantaneous voltage and contact angle of the droplet on the dielectric layer. Results indicate that, under the influence of OEW, significant variations in the interface contact angle of droplets occur in bright and dark regions, inducing droplet movement. Moreover, the dynamic behavior of droplet transport is closely associated with various parameters, including externally applied voltage, dielectric layer material, and interfacial tension between the two phases, all of which impact the contact angle and, consequently, the transport process. By summarizing the influence patterns of the three key parameters studied, the optimization of droplet transport performance is achieved. The study employs two-dimensional simulation models to emulate the droplet motion under the influence of the electric field, investigating the OEW droplet transport mechanism. The continuous movement of droplets involves three stages: initial wetting, continuous transport, and reaching a steady position. The findings contribute theoretical support for the efficient design of digital microfluidic devices for OEW droplet movement and the selection of key parameters for droplet manipulation.

Rapid automated extracellular vesicle isolation and miRNA preparation on a cost-effective digital microfluidic platform.

As a prerequisite for extracellular vesicle (EV) -based studies and diagnosis, effective isolation, enrichment and retrieval of EV biomarkers are crucial to subsequent analyses, such as miRNA-based liquid biopsy for non-small-cell lung cancer (NSCLC). However, most conventional approaches for EV isolation suffer from lengthy procedure, high cost, and intense labor. Herein, we introduce the digital microfluidic (DMF) technology to EV pretreatment protocols and demonstrate a rapid and fully automated sample preparation platform for clinical tumor liquid biopsy. Combining a reusable DMF chip technique with a low-cost EV isolation and miRNA preparation protocol, the platform completes automated sample processing in 20-30 min, supporting immediate RT-qPCR analyses on EV-derived miRNAs (EV-miRNAs). The utility and reliability of the platform was validated via clinical sample processing for EV-miRNA detection. With 23 tumor and 20 non-tumor clinical plasma samples, we concluded that EV-miR-486-5p and miR-21-5p are effective biomarkers for NSCLC with a small sample volumn (20-40 µL). The result was consistent to that of a commercial exosome miRNA extraction kit. These results demonstrate the effectiveness of DMF in EV pretreatment for miRNA detection, providing a facile solution to EV isolation for liquid biopsy.

Transitional Electrodes in Electrowetting-Based Droplet Dispensing.

Digital microfluidic systems based on electrowetting-on-dielectric technology, particularly valuable in producing and manipulating microdroplets steadily and consistently, have experienced notable advancements in recent years. In this paper, experimental characterizations reveal that simply adding one transitional electrode between the reservoir and the splitting electrode improves the volumetric consistency and reproducibility for droplet dispensing. The volumetric coefficient variation of the consecutively dispensed droplets from a non-refilling reservoir decreases by 1% after the addition of one transitional electrode, with no extra external apparatus. This work provides a straightforward yet effective approach to the improvement of digital microfluidic systems and micro total analysis systems.

DIRECT: Digital Microfluidics for Isolation-Free Shared Library Construction of Single-Cell DNA Methylome and Transcriptome.

Simultaneous profiling of DNA methylation and gene expression within single cells is a powerful technology to dissect complex gene regulatory network of cells. However, existing methods are based on picking a single-cell in a tube and split single-cell lysate into two parts for transcriptome and methylome library construction, respectively, which is costly and cumbersome. Here, DIRECT is proposed, a digital microfluidics-based method for high-efficiency single-cell isolation and simultaneous analysis of the methylome and transcriptome in a single library construction. The accuracy of DIRECT is demonstrated in comparison with bulk and single-omics data, and the high CpG site coverage of DIRECT allows for precise analysis of copy number variation information, enabling expansion of single cell analysis from two- to three-omics. By applying DIRECT to monitor the dynamics of mouse embryonic stem cell differentiation, the relationship between DNA methylation and changes in gene expression during differentiation is revealed. DIRECT enables accurate, robust, and reproducible single-cell DNA methylation and gene expression co-analysis in a more cost-effective, simpler library preparation and automated manner, broadening the application scenarios of single-cell multi-omics analysis and revealing a more comprehensive and fine-grained map of cellular regulatory landscapes.

Multiplex digital microfluidics using serial controls and its applications in glucose sensing.

Digital microfluidics (DMF) has found great applications in vitro diagnostics (IVD). Compared to the microfabrication-based DMF, printed circuit board (PCB)-based DMF is more economical and compatible with existing IVD instruments. Despite that, current PCB-based DMF is oftentimes limited by the available droplets that can be controlled simultaneously, compromising their throughput and applications as point-of-care tools. In this work, a platform that simultaneously controls multiple PCB-based DMF plates was constructed. The software and hardware were first developed, followed by the reliability tests. Colorimetric analysis of glucose was applied to the PCB-based DMF, demonstrating the capability of this platform. With the high throughput enabled by simultaneous operations of multiple plates, this PCB-based DMF can potentially allow point-of-care testing with low cost for resource-limited settings.