Construction of robust protein nanocage by designed disulfide bonds for active cargo molecules protection in the gastric environment.

Notwithstanding the progress made, cargo molecules encapsulated within ferritin via oral administration in the gastric environment remains a persistent challenge. This study focuses on the strategic enhancement of ferritin stability in harsh gastric environment. By taking advantagie of computational-assisted design, we strategically introduced up to 96 disulfide bonds along three key inter-subunit interfaces to one single ferritin molecule with human H-chain ferritin and shrimp (Marsupenaeus japonicus) ferritin as starting materials, producing two kinds of robust ferritin nanocages with markedly enhanced acid and protease (pepsin and rennin) resistance. The crystal structure of ferritin nanocage confirmed our design at an atomic level. Encapsulation experiments demonstrated successful loading of bioactive cargo molecules (e.g., doxorubicin) into the engineered ferritin nanocages, with pronouncedly improved protection against leakage under acidic condition and the presence of pepsin and rennin as compared to their native counterparts. This study presents a potential approach for the design and engineering of protein nanocages for oral administration.

The Marine Antimicrobial Peptide AOD with Intact Disulfide Bonds Has Remarkable Antibacterial and Anti-Biofilm Activity.

American Oyster Defensin (AOD) is a marine peptide that is derived from North American mussels. It has been demonstrated to exhibit potent antimicrobial activity and high safety in both in vitro and in vivo models. In this study, to facilitate synthesis, mutants of AOD with fewer disulfide bonds were designed and subjected to structural, antimicrobial, and anti-biofilm analysis. The antimicrobial activity of AOD-derived peptides decreased after reduction in the disulfide bond, and among its three derivatives, only AOD-1 inhibited very few bacteria with a MIC value of 64 µg/mL, whereas the others had no inhibitory effect on pathogenic bacteria. The findings demonstrated that full disulfide bonds are indispensable for bactericidal activity, with the α-helix playing a pivotal role in inhibiting bacterial membranes. Furthermore, the results of the ATP, ROS, membrane potential, and membrane fluidity assays demonstrated that intracellular ATP, reactive oxygen species, and membrane fluidity were all increased, while membrane potential was reduced. This indicated that AOD resulted in the impairment of membrane fluidity and induced metabolic disorders, ultimately leading to bacterial death. The inhibitory effect of AOD on the biofilm of S. epidermidis G-81 was determined through the crystal violet and confocal microscopy. The results demonstrated that AOD exhibited a notable inhibitory impact on the biofilm of S. epidermidis G-81. The minimum biofilm inhibitory concentration of AOD on S. epidermidis G-81 was 16 µg/mL, and the minimum biofilm scavenging concentration was 32 µg/mL, which exhibited superior efficacy compared to that of lincomycin. The inhibitory effect on the primary biofilm was 90.3%, and that on the mature biofilm was 82.85%, with a dose-dependent inhibition effect. Concurrently, AOD cleared intra-biofilm organisms and reduced the number of biofilm-holding bacteria by six orders of magnitude. These data indicate that disulfide bonds are essential to the structure and activity of AOD, and AOD may potentially become an effective dual-action antimicrobial and anti-biofilm agent.

Intermolecular disulfide bond of PRRSV GP5 and M facilitates VLPs secretion and cell binding.

Porcine reproductive and respiratory syndrome virus (PRRSV), the causative agent of porcine reproductive and respiratory syndrome (PRRS), continues to significantly impact on the global swine industry. GP5 and M are the primary structural proteins of PRRSV, playing crucial roles in the processes of virus attachment, entry, assembly and budding. The co-expression of GP5 and M can result in the formation of virus-like particles (VLPs). However, the underlying mechanisms remain incompletely understood. This study investigated the role of GP5-M interaction in VLPs secretion and cell binding. VLPs were generated by co-expressing GP5 and M via recombinant baculoviruses in Sf9 cells and confirmed by transmission electron microscopy. The secretion of VLPs was modulated by the expression levels of GP5 and M. Using the BirA technique, the GP5-M interaction was confirmed in Sf9 cells. Disruption of the N-terminally intermolecular disulfide bond between GP5 and M weakened, but did not completely abolish, the interaction between the proteins, leading to reduced VLPs secretion. Notably, the absence of this intermolecular disulfide bond resulted in the loss of VLPs' ability to bind to MARC-145 cells. In summary, our findings reveal the critical function of the intermolecular disulfide bond in GP5-M interaction, which significantly contributes to VLPs secretion and cell binding, and suggest potential interaction sites between GP5 and M.

Disulfide Bond Engineering of Soluble ACE2 for Thermal Stability Enhancement.

Although the primary pandemic of SARS-CoV-2 is over, there are concerns about the resurgence of the next wave of related viruses, including a wide range of variant viruses. The soluble ACE2 (sACE2) inhibits the SARS-CoV-2 spike protein ACE2 interaction and has potential as a variant-independent therapeutic against SARS-CoV-2. Here, we introduce novel disulfide bonds in the wild-type sACE2-Fc by structure-guided mutagenesis, aiming to improve its stability. The stability of each mutant was assessed by a thermal shift assay to screen mutants with increased thermal stability. As a result, we identified a mutant sACE2-Fc with a significantly increased melting temperature. X-ray crystal structure determination of the sACE2 mutant confirmed the correct formation of the designed disulfide bond, and there were no significant structural disturbances. We also proved that the thermostable sACE2-Fc preserved the spike protein binding affinity comparable to the wild-type sACE2-Fc in both molecular and cellular environments, suggesting its therapeutic potential.

A disulfide bond mutant of Pseudoalteromonas porphyrae κ-carrageenase conferred improved thermostability and catalytic activity and facilitated its utilization in κ-carrageenan industrial waste residues recycling.

In this study, Discovery Studio was employed to predict the potential disulfide bond mutants of the catalytic domain of Pseudoalteromonas porphyrae κ-carrageenase to improve the catalytic activity and thermal stability. The mutant N205C-G239C was identified with significantly increased catalytic activity toward κ-carrageenan substrate, with activity 4.28 times that of WT. The optimal temperature of N205C-G239C was 55 °C, 15 °C higher than that of WT. For N205C-G239C, the t1/2 value at 50 °C was 52 min, 1.41 times that of WT. The microstructural analysis revealed that the introduced disulfide bond N205C-G239C could create a unique catalytic environment by promoting favorable interactions with κ-neocarratetraose. This interaction impacted various aspects such as product release, water molecule network, thermodynamic equilibrium, and tunnel size. Molecular dynamics simulations demonstrated that the introduced disulfide bond enhanced the overall structure rigidity of N205C-G239C. The results of substrate tunnel analysis showed that the mutation led to the widening of the substrate tunnel. The above structure changes could be the possible reasons responsible for the simultaneous enhancement of the catalytic activity and thermal stability of mutant N205C-G239C. Finally, N205C-G239C exhibited the effective hydrolysis of the κ-carrageenan industrial waste residues, contributing to the recycling of the oligosaccharides and perlite.

Enhancing the Antibody Production Efficiency of Chinese Hamster Ovary Cells through Improvement of Disulfide Bond Folding Ability and Apoptosis Resistance.

The complex structure of monoclonal antibodies (mAbs) expressed in Chinese hamster ovary (CHO) cells may result in the accumulation of unfolded proteins, triggering endoplasmic reticulum (ER) stress and an unfolded protein response (UPR). If the protein folding ability cannot maintain ER homeostasis, the cell will shut down protein translation and ultimately induce apoptosis. We co-overexpressed HsQSOX1b and survivin proteins in the antibody-producing cell line CHO-PAb to obtain a new cell line, CHO-PAb-QS. Compared with CHO-PAb cells, the survival time of CHO-PAb-QS cells in batch culture was extended by 2 days, and the antibody accumulation and productivity were increased by 52% and 45%, respectively. The proportion of (HC-LC)2 was approximately doubled in the CHO-PAb-QS cells, which adapted to the accelerated disulfide bond folding capacity by upregulating the UPR's strength and increasing the ER content. The results of the apoptosis assays indicated that the CHO-PAb-QS cell line exhibited more excellent resistance to apoptosis induced by ER stress. Finally, CHO-PAb-QS cells exhibited mild oxidative stress but did not significantly alter the redox status. This study demonstrated that strategies based on HsQSOX1b and survivin co-overexpression could facilitate protein disulfide bond folding and anti-apoptosis ability, enhancing antibody production efficiency in CHO cell lines.

Effect of N-ethylmaleimide as a blocker of disulfide bonds formation on the properties of different protein-emulsion MP composite gels.

Three different emulsions of myofibrillar protein (MP), soy protein isolate (SPI) and egg white protein isolate (EPI) were individually mixed with MP sol to form composite gels. N-ethylmaleimide (NEM) was used as a sulfhydryl group blocker to evaluate the effects of sulfhydryl and disulfide bonds on the properties of different protein-emulsion composite gels. The results show that the disulfide bond contents in the MP (SPI, EPI) emulsion composite gel decreased from the initial 2.4 ± 0.1, (2.3 ± 0.2, 1.8 ± 0.4) mol/kg to 0.6 ± 0.1, (0.5 ± 0.3, 0.7 ± 0.1) mol/kg with the NEM content increased. In addition, the microstructure showed that the interfacial protein membrane of the emulsion globules were broken in different degrees, indicating that the interaction between the emulsion and the gel matrix was weakened. Meanwhile, gel strength, water distribution and elastic modulus of the composite gels were reduced with NEM contents increased.

Disulfide-stabilized trimeric hemagglutinin ectodomains provide enhanced heterologous influenza protection.

Influenza virus infection poses a continual menace to public health. Here, we developed soluble trimeric HA ectodomain vaccines by establishing interprotomer disulfide bonds in the stem region, which effectively preserve the native antigenicity of stem epitopes. The stable trimeric H1 ectodomain proteins exhibited higher thermal stabilities in comparison with unmodified HAs and showed strong binding activities towards a panel of anti-stem cross-reactive antibodies that recognize either interprotomer or intraprotomer epitopes. Negative stain transmission electron microscopy (TEM) analysis revealed the stable trimer architecture of the interprotomer disulfide-stapled WA11#5, NC99#2, and FLD#1 proteins as well as the irregular aggregation of unmodified HA molecules. Immunizations of mice with those trimeric HA ectodomain vaccines formulated with incomplete Freund's adjuvant elicited significantly more potent cross-neutralizing antibody responses and offered broader immuno-protection against lethal infections with heterologous influenza strains compared to unmodified HA proteins. Additionally, the findings of our study indicate that elevated levels of HA stem-specific antibody responses correlate with strengthened cross-protections. Our design strategy has proven effective in trimerizing HA ectodomains derived from both influenza A and B viruses, thereby providing a valuable reference for designing future influenza HA immunogens.

Enhancing the cytotoxicity of immunotoxins by facilitating their dissociation from target receptors under the reducing conditions of the endocytic pathway.

Immunotoxins (ITs) are recombinant chimeric proteins that combine a protein toxin with a targeting moiety to facilitate the selective delivery of the toxin to cancer cells. Here, we present a novel strategy to enhance the cytosolic access of ITs by promoting their dissociation from target receptors under the reducing conditions of the endocytic pathway. We engineered monobodySS, a human fibronectin type III domain-based monobody with disulfide bond (SS)-containing paratopes, targeting receptors such as EGFR, EpCAM, Her2, and FAP. MonobodySS exhibited SS-dependent target receptor binding with a significant reduction in binding under reducing conditions. We then created monobodySS-based ITs carrying a 25 kDa fragment of Pseudomonas exotoxin A (PE25), termed monobodySS-PE25. These ITs showed dose-dependent cytotoxicity against target receptor-expressing cancer cells and a wider therapeutic window due to higher efficacy at lower doses compared to controls with SS reduction inhibited. ERSS/28-PE25, with a KD of 28 nM for EGFR, demonstrated superior tumor-killing potency compared to ER/21-PE25, which lacks an SS bond, at equivalent and lower doses. In vivo, ERSS/28-PE25 outperformed ER/21-PE25 in suppressing tumor growth in EGFR-overexpressing xenograft mouse models. This study presents a strategy for developing solid tumor-targeting ITs using SS-containing paratopes to enhance cytosolic delivery and antitumor efficacy.

A simplified non-reduced peptide mapping method with faster and efficient enzymatic digestion for characterization of native disulfide bonds in monoclonal and bispecific antibodies.

Development of monoclonal and bispecific antibody-based protein therapeutics requires detailed characterization of native disulfide linkages, which is commonly achieved through peptide mapping under non-reducing conditions followed by liquid chromatography-mass spectrometry (LC-MS) analysis. One major challenge of this method is incomplete protein digestion due to insufficient denaturation of antibodies under non-reducing conditions. For a long time, researchers have explored various strategies with the aim of efficiently digesting antibody drugs when the disulfide bonds remain intact, but few could achieve this by using a simple and generic approach with well controlled disulfide scrambling artifacts. Here, we report a simple method for fast and efficient mapping of native disulfides of monoclonal and bispecific antibody-based protein therapeutics. The method was optimized to achieve optimal digestion efficiency by denaturing proteins with 8 M urea plus 0-1.25 M guanidine-HCl at elevated temperature (50 °C), followed by two-step digestion with trypsin/Lys-C mix using a one-pot reaction. The only parameter that needs to be optimized for different proteins is the concentration of guanidine-HCl present. This simplified sample preparation eliminated buffer exchange and can be completed within three hours. By using this new method, all native disulfide bonds were confirmed for these monoclonal and bispecific antibodies with high confidence. When compared with a commercial kit utilizing low-pH digestion condition, the new method demonstrated higher digestion efficiency and shorter sample preparation time. These results suggest this new one-pot-two-step digestion method is suitable for the characterization of antibody disulfide bonds, particularly for those antibodies with digestion-resistant domains under typical digestion conditions.

Rational design of disulfide bonds to increase thermostability of Rhodococcus opacus catechol 1,2 dioxygenase.

Catechol 1,2 dioxygenase is a versatile enzyme with several potential applications. However, due to its low thermostability, its industrial potential is not being met. In this study, the thermostability of a mesophilic catechol 1,2 dioxygenase from the species Rhodococcus opacus was enhanced via the introduction of disulphide bonds into its structure. Engineered designs (56) were obtained using computational prediction applications, with a set of hypothesized selection criteria narrowing the list to 9. Following recombinant production and purification, several of the designs demonstrated substantially improved protein thermostability. Notably, variant K96C-D278C yielded improvements including a 4.6°C increase in T50, a 725% increase in half-life, a 5.5°C increase in Tm, and a >10-fold increase in total turnover number compared to wild type. Stacking of best designs was not productive. Overall, current state-of-the-art prediction algorithms were effective for design of disulfide-thermostabilized catechol 1,2 dioxygenase.

Interchain disulfide engineering enables the efficient production of functional HLA-DQ-Fc fusion proteins.

HLA-DQ molecules drive unwanted alloimmune responses after solid-organ transplants and several autoimmune diseases, including type 1 diabetes and celiac disease. Biologics with HLA molecules as part of the design are emerging therapeutic options for these allo- and autoimmune conditions. However, the soluble α and ß chains of class II HLA molecules do not dimerize efficiently without their transmembrane domains, which hinders their production. In this study, we examined the feasibility of interchain disulfide engineering by introducing paired cysteines to juxtaposed positions in the α and ß chains of HLA-DQ7, encoded by HLA-DQA1∗05:01 and HLA-DQB1∗03:01 respectively. We identified three variant peptide-HLA-DQ7-Fc fusion proteins (DQ7Fc) with increased expression and production yield, namely Y19C-D6C (YCDC), A83C-E5C (ACEC), and A84C-N33C (ACNC). The mutated residues were conserved across all HLA-DQ proteins and had limited solvent exposure. Further characterizations of the YCDC variant showed that the expression of the fusion protein is peptide-dependent; inclusion of a higher-affinity peptide correlated with increased protein expression. However, high-affinity peptide alone was insufficient for stabilizing the DQ7 complex without the engineered disulfide bond. Multiple DQ7Fc variants demonstrated expected binding characteristics with commercial anti-DQ antibodies in two immunoassays and by a cell-based assay. Lastly, DQ7Fc variants demonstrated dose-dependent killing of DQ7-specific B cell hybridomas in a flow cytometric, complement-dependent cytotoxicity assay. These data support inter-chain disulfide engineering as a novel approach to efficiently producing functional HLA-DQ molecules and potentially other class II HLA molecules as candidate therapeutic agents.

Research Progress of Disulfide Bond Based Tumor Microenvironment Targeted Drug Delivery System.

Cancer poses a significant threat to human life and health. Chemotherapy is currently one of the effective cancer treatments, but many chemotherapy drugs have cell toxicity, low solubility, poor stability, a narrow therapeutic window, and unfavorable pharmacokinetic properties. To solve the above problems, target drug delivery to tumor cells, and reduce the side effects of drugs, an anti-tumor drug delivery system based on tumor microenvironment has become a focus of research in recent years. The construction of a reduction-sensitive nanomedicine delivery system based on disulfide bonds has attracted much attention. Disulfide bonds have good reductive responsiveness and can effectively target the high glutathione (GSH) levels in the tumor environment, enabling precise drug delivery. To further enhance targeting and accelerate drug release, disulfide bonds are often combined with pH-responsive nanocarriers and highly expressed ligands in tumor cells to construct drug delivery systems. Disulfide bonds can connect drug molecules and polymer molecules in the drug delivery system, as well as between different drug molecules and carrier molecules. This article summarized the drug delivery systems (DDS) that researchers have constructed in recent years based on disulfide bond drug delivery systems targeting the tumor microenvironment, disulfide bond cleavage-triggering conditions, various drug loading strategies, and carrier design. In this review, we also discuss the controlled release mechanisms and effects of these DDS and further discuss the clinical applicability of delivery systems based on disulfide bonds and the challenges faced in clinical translation.

Stapling Cysteine[2,4] Disulfide Bond of α-Conotoxin LsIA and Its Potential in Target Delivery.

α-Conotoxins, as selective nAChR antagonists, can be valuable tools for targeted drug delivery and fluorescent labeling, while conotoxin-drug or conotoxin-fluorescent conjugates through the disulfide bond are rarely reported. Herein, we demonstrate the [2,4] disulfide bond of α-conotoxin as a feasible new chemical modification site. In this study, analogs of the α-conotoxin LsIA cysteine[2,4] were synthesized by stapling with five linkers, and their inhibitory activities against human α7 and rat α3ß2 nAChRs were maintained. To further apply this method in targeted delivery, the alkynylbenzyl bromide linker was synthesized and conjugated with Coumarin 120 (AMC) and Camptothecin (CPT) by copper-catalyzed click chemistry, and then stapled between cysteine[2,4] of the LsIA to construct a fluorescent probe and two peptide-drug conjugates. The maximum emission wavelength of the LsIA fluorescent probe was 402.2 nm, which was essentially unchanged compared with AMC. The cytotoxic activity of the LsIA peptide-drug conjugates on human A549 was maintained in vitro. The results demonstrate that the stapling of cysteine[2,4] with alkynylbenzyl bromide is a simple and feasible strategy for the exploitation and utilization of the α-conotoxin LsIA.

Oxidative refolding by Copper-catalyzed air oxidation consistently increases the homogeneity and activity of a Novel Interleukin-2 mutein.

Interleukin-2 (IL-2) has been used in cancer treatment for over 30 years. However, due to its high toxicity, new mutant variants have been developed. These variants retain some of the biological properties of the original molecule but offer other therapeutic advantages. At the Center of Molecular Immunology, the IL-2 no-alpha mutein, an IL-2 agonist with lower toxicity than wtIL-2, has been designed, produced, and is currently being evaluated in a Phase I/II clinical trial. The mutein is produced in E. coli as an insoluble material that must be refolded in vitro to yield a fully active protein. Controlled oxidation steps are essential in the purification process of recombinant proteins produced in E. coli to ensure the proper formation of the disulfide bonds in the molecules. In this case, the new purification process includes a copper-catalyzed air oxidation step to induce disulfide bond establishment. The optimal conditions of pH, copper, protein and detergent concentration for this step were determined through screening. The produced protein demonstrated a conserved 3D structure, higher purity, and greater biological activity than the obtained by established process without the oxidation step. Four batches were produced and evaluated, demonstrating the consistency of the new process.

MarR family proteins sense sulfane sulfur in bacteria.

Members of the multiple antibiotic resistance regulator (MarR) protein family are ubiquitous in bacteria and play critical roles in regulating cellular metabolism and antibiotic resistance. MarR family proteins function as repressors, and their interactions with modulators induce the expression of controlled genes. The previously characterized modulators are insufficient to explain the activities of certain MarR family proteins. However, recently, several MarR family proteins have been reported to sense sulfane sulfur, including zero-valent sulfur, persulfide (R-SSH), and polysulfide (R-SnH, n ≥ 2). Sulfane sulfur is a common cellular component in bacteria whose levels vary during bacterial growth. The changing levels of sulfane sulfur affect the expression of many MarR-controlled genes. Sulfane sulfur reacts with the cysteine thiols of MarR family proteins, causing the formation of protein thiol persulfide, disulfide bonds, and other modifications. Several MarR family proteins that respond to reactive oxygen species (ROS) also sense sulfane sulfur, as both sulfane sulfur and ROS induce the formation of disulfide bonds. This review focused on MarR family proteins that sense sulfane sulfur. However, the sensing mechanisms reviewed here may also apply to other proteins that detect sulfane sulfur, which is emerging as a modulator of gene regulation.

Glutathione-responsive CD-MOFs co-loading honokiol and indocyanine green biomimetic active targeting to enhance photochemotherapy for breast cancer.

Breast cancer has now replaced lung cancer as the most prevalent malignant tumor worldwide, posing a serious health risk to women. We have recently designed a promising option strategy for the treatment of breast cancer. In this work, cyclodextrin metal-organic frameworks with high drug-carrying properties were endo-crosslinked by 3,3'dithiodipropionyl chloride to form cubic phase gel nanoparticles, which were drug-loaded and then coated by MCF-7 cell membranes. After intravenous injection, this multifunctional nanomedicine achieved dramatically homologous targeting co-delivery of honokiol and indocyanine green to the breast tumor. Further, the disulfide bonds in the nanostructures achieved glutathione-responsive drug release, induced tumor cells to produce reactive oxygen species and promoted apoptosis, resulting in tumor necrosis, and at the same time, inhibited Ki67 protein expression, which enhanced photochemotherapy, and resulted in a 94.08 % in vivo tumor suppression rate in transplanted tumor-bearing mice. Thereby, this nanomimetic co-delivery system may have a place in breast cancer therapy due to its simple fabrication process, excellent biocompatibility, efficient targeted delivery of insoluble drugs, and enhanced photochemotherapy.

Rational Design of Loop Dynamics for a Barrel-Shaped Enzyme by Introducing Disulfide Bonds.

Loop dynamics redesign is an important strategy to manipulate protein function. Cellobiose 2-epimerase (CE) and other members of its superfamily are widely used for diverse industrial applications. The structural feature of the loops connecting barrel helices contributes greatly to the differences in their functional characteristics. Inspired by the in-silico mutation with molecular dynamics (MD) simulation analysis, we propose a strategy for identifying disulfide bond mutation candidates based on the prediction of protein flexibility and residue-residue interaction. The most beneficial mutant with the newly introduced disulfide bond would simultaneously improve both its thermostability and its reaction propensity to the targeting isomerization product. The ratio of the isomerization/epimerization catalytic rate was improved from 4:103 to 9:22. MD simulation and binding free energy calculations were applied to provide insights into molecular recognition upon mutations. The comparative analysis of enzyme/substrate binding modes indicates that the altered catalytic reaction pathway is due to less efficient binding of the native product. The key residue responsible for the observed phenotype was identified by energy decomposition and was further confirmed by the mutation experiment. The rational design of the key loop region might be a promising strategy to alter the catalytic behavior of all (α/α)6-barrel-like proteins.

Disulfidptosis: A new type of cell death.

Disulfidptosis is a novel form of cell death that is distinguishable from established programmed cell death pathways such as apoptosis, pyroptosis, autophagy, ferroptosis, and oxeiptosis. This process is characterized by the rapid depletion of nicotinamide adenine dinucleotide phosphate (NADPH) in cells and high expression of solute carrier family 7 member 11 (SLC7A11) during glucose starvation, resulting in abnormal cystine accumulation, which subsequently induces andabnormal disulfide bond formation in actin cytoskeleton proteins, culminating in actin network collapse and disulfidptosis. This review aimed to summarize the underlying mechanisms, influencing factors, comparisons with traditional cell death pathways, associations with related diseases, application prospects, and future research directions related to disulfidptosis.

Transfer of disulfide bond formation modules via yeast artificial chromosomes promotes the expression of heterologous proteins in Kluyveromyces marxianus.

Kluyveromyces marxianus is a food-safe yeast with great potential for producing heterologous proteins. Improving the yield in K. marxianus remains a challenge and incorporating large-scale functional modules poses a technical obstacle in engineering. To address these issues, linear and circular yeast artificial chromosomes of K. marxianus (KmYACs) were constructed and loaded with disulfide bond formation modules from Pichia pastoris or K. marxianus. These modules contained up to seven genes with a maximum size of 15 kb. KmYACs carried telomeres either from K. marxianus or Tetrahymena. KmYACs were transferred successfully into K. marxianus and stably propagated without affecting the normal growth of the host, regardless of the type of telomeres and configurations of KmYACs. KmYACs increased the overall expression levels of disulfide bond formation genes and significantly enhanced the yield of various heterologous proteins. In high-density fermentation, the use of KmYACs resulted in a glucoamylase yield of 16.8 g/l, the highest reported level to date in K. marxianus. Transcriptomic and metabolomic analysis of cells containing KmYACs suggested increased flavin adenine dinucleotide biosynthesis, enhanced flux entering the tricarboxylic acid cycle, and a preferred demand for lysine and arginine as features of cells overexpressing heterologous proteins. Consistently, supplementing lysine or arginine further improved the yield. Therefore, KmYAC provides a powerful platform for manipulating large modules with enormous potential for industrial applications and fundamental research. Transferring the disulfide bond formation module via YACs proves to be an efficient strategy for improving the yield of heterologous proteins, and this strategy may be applied to optimize other microbial cell factories.