Developing behavioural ecotoxicology assessment methods in the tropical marine amphipod, Parhyale hawaiensis: A study with benzo[a]pyrene (BaP).

Toxicant-induced behavioural changes provide important insights into environmental toxicity, particularly in vulnerable tropical marine habitats. However, ecotoxicological knowledge of organisms in these environments is insufficient. We aimed to develop innovative and cost-effective ecotoxicology methods using Parhyale hawaiensis as a tropical model organism. Adult P. hawaiensis were exposed to aqueous benzo[a]pyrene (BaP) (2 µM) and dietary BaP (50, 250, or 1250 µg BaP/g diet). Survival (24 to 96 h) and behavioural responses (21d) to foraging, reproduction, and predator avoidance were studied. Aqueous and dietary exposures to benzo[a]pyrene (BaP) did not affect survival but induced significant immobility with effective concentration (EC50 ± SE, 96 h at 11.89 ± 1.19 µM). Relative to the control group, aqueous exposure to 2 µM and dietary exposure to 250 and 1250 µg BaP/g feed resulted in statistically significant behavioural changes. These included a 55-76 % reduction in feeding rates, 133 % increase in chemosensation time, 60-122 % drop in moulting frequency, 200 % delay in precopulatory activity, 50-83 % decrease in geotactic activity, and 300-400 % increase in phototactic activity (all significant at p ≤ 0.05). The methods developed in this study are cost-effective, sensitive, and readily integrated into other endpoint analyses, reinforcing the potential of P. hawaiensis as a tropical ecotoxicology model for detecting toxicant-induced behavioural responses and enhancing marine risk assessments.

Granulated rubber in playgrounds and sports fields: A potential source of atmospheric plastic-related contaminants and plastic additives after runoff events.

The use of "crumb rubber" coming from recycling materials in outdoor floors like playgrounds has been a frequent practice during the last years. However, these surfaces are object of abrasion and weathering being a potential source of micro and nanoplastics (MNPLs) to the atmosphere and a potential source of human exposure to them. Our main goal has been to expose different crumb rubber materials to summer weathering effects. The released inhalable fractions were sampled for two months with passive samplers and the composition of MNPLs and plastic additives (organic and inorganic) were evaluated. The ecotoxicological effects of leached materials emulating runoff events was evaluated in freshwater micro crustacean Daphnia magna and the green algae Chlorella vulgaris. The analysis of MNPLs showed the presence of polyethylene, polypropylene, polybutadiene, polysiloxanes and polybutylene at concentrations up to 30,426 ng/m3. In the same fraction, we also identified up to 56 plastic additives, including antioxidants, pigments, copolymers, flame retardants, fungicides, lubricants, plasticizers, UV filters and metal ions. Finally, runoff ecotoxicological effects on D. magna and C. vulgaris showed that leached compounds, either from virgin or aged material, would be toxicants for exposed organisms although at concentrations much higher than those expected to be released to the media.

Degradation of Isotianil in Water and Soil: Kinetics, Degradation Pathways, Mechanisms, and Ecotoxicity Assessments.

Pesticides are transported and transformed in soil and can enter surface water through various pathways. They undergo hydrolysis, oxidation, and photoconversion in surface water. Isotianil is a new fungicide that effectively controls rice blast. However, there are limited reports on its degradation. Herein, the hydrolysis and photolysis of isotianil in water and its degradation in soil samples from five provinces of China were investigated. The degradation products of isotianil were identified using ultrahigh-performance liquid chromatography-Q exactive hybrid quadrupole-orbitrap high-resolution accurate mass spectrometry, and four compounds were discovered for the first time. The degradation pathways of isotianil were inferred, and the reaction active site and degradation mechanism of isotianil were clarified based on density functional theory calculations. The ecotoxicity of the degradation product M118 (aminobenzonitrile) was found to be moderate toward Daphnia magna, which was predicted and confirmed by Ecological Structure Activity Relationships and the experiment, respectively. The results of this study will contribute to a better understanding of the fate of isotianil in the environment.

Sustainable control of Microcystis aeruginosa, a harmful cyanobacterium, using Selaginella tamariscina extracts.

Eco-friendly reagents derived from plants represent a promising strategy to mitigate the occurrence of toxic cyanobacterial blooms. The use of an amentoflavone-containing Selaginella tamariscina extract (STE) markedly decreased the number of Microcystis aeruginosa cells, thus demonstrating significant anti-cyanobacterial activity. In particular, the Microcystis-killing fraction obtained from pulverized S. tamariscina using hot-water-based extraction at temperatures of 40 °C induced cell disruption in both axenic and xenic M. aeruginosa. Liquid chromatographic analysis was also conducted to measure the concentration of amentoflavone in the STE, thus supporting the potential M. aeruginosa-specific killing effects of STE. Bacterial community analysis revealed that STE treatment led to a reduction in the relative abundance of Microcystis species while also increasing the 16S rRNA gene copy number in both xenic M. aeruginosa NIBR18 and cyanobacterial bloom samples isolated from a freshwater environment. Subsequent testing on bacteria, cyanobacteria, and algae isolated from freshwater revealed that STE was not toxic for other taxa. Furthermore, ecotoxicology assessment involving Aliivibrio fischeri, Daphnia magna, and Danio rerio found that high STE doses immobilized D. magna but did not impact the other organisms, while there was no change in the water quality. Overall, due to its effective Microcystis-killing capability and low ecotoxicity, aqueous STE represents a promising practical alternative for the management of Microcystis blooms.

Concentration-dependent effects of spinetoram on nontarget freshwater microalgae: A comparative study on Chlorella vulgaris and Microcystis aeruginosa.

The rising global demand for agricultural products is leading to the widespread application of pesticides, such as spinetoram, resulting in environmental pollution and ecotoxicity to nontarget organisms in aquatic ecosystems. This research focused on assessing the toxicity of spinetoram at various concentrations (0, 0.01, 0.1, 0.5, 1.0, and 3.0 mg L-1) on two common freshwater microalgae, Chlorella vulgaris and Microcystis aeruginosa, to shed light on the ecotoxicological effects of insecticides. Our findings demonstrate that M. aeruginosa is more sensitive to spinetoram than is C. vulgaris, with a concentration-dependent reduction in the growth rate observed for M. aeruginosa, whereas only the highest concentration of spinetoram adversely affected C. vulgaris. At a concentration of 0.01 mg L-1, the growth rate of M. aeruginosa unexpectedly increased beginning on day 7, indicating a potential hormetic effect. Although initial exposure to spinetoram improved the photosynthetic efficiency of both microalgae strains at all concentrations, detrimental effects became apparent at higher concentrations and with prolonged exposure. The photosynthetic efficiency of C. vulgaris recovered, in contrast to that of M. aeruginosa, which exhibited limited recovery. Spinetoram more significantly inhibited the effective quantum yield of PSII (EQY) in M. aeruginosa than in C. vulgaris. Although spinetoram is not designed to target phytoplankton, its toxicity can disrupt primary productivity and modify phytoplankton-consumer interactions via bottom-up control mechanisms. This study enhances our understanding of spinetoram's ecotoxicity and potential effects on aquatic ecosystems.

Persulfate-Based Advanced Oxidation Process for Chlorpyrifos Degradation: Mechanism, Kinetics, and Toxicity Assessment.

Persulfate-based advanced oxidation process has been proven to be a promising method for the toxic pesticide chlorpyrifos (CPY) degradation in wastewater treatment. However, due to the limitation for the short-lived intermediates detection, a comprehensive understanding for the degradation pathway remains unclear. To address this issue, density functional theory was used to analyze the degradation mechanism of CPY at the M06-2X/6-311++G(3df,3pd)//M06-2X/6-31+G(d,p) level, and computational toxicology methods were employed to explore the toxicity of CPY and its degradation products. Results show that hydroxyl radicals (·OH) and sulfate radicals (SO4•-) initiate the degradation reactions by adding to the P=S bond and abstracting the H atom on the ethyl group, rather than undergoing α-elimination of the pyridine ring in the persulfate oxidation process. Moreover, the addition products were attracted and degraded by breaking the P-O bond, while the abstraction products were degraded through dealkylation reactions. The transformation products, including 3,5,6-trichloro-2-pyridynol, O,O-diethyl phosphorothioate, chlorpyrifos oxon, and acetaldehyde, obtained through theoretical calculations have been detected in previous experimental studies. The reaction rate constants of CPY with ·OH and SO4•- were 6.32 × 108 and 9.14 × 108 M-1·s-1 at room temperature, respectively, which was consistent with the experimental values of 4.42 × 109 and 4.5 × 109 M-1 s-1. Toxicity evaluation results indicated that the acute and chronic toxicity to aquatic organisms gradually decreased during the degradation process. However, some products still possess toxic or highly toxic levels, which may pose risks to human health. These research findings contribute to understanding the transformation behavior and risk assessment of CPY in practical wastewater treatment.

Transcriptome analysis reveals limited toxic effects of the UV-filter benzophenone-3 (BP-3) on the hermatypic coral Acropora tenuis and its symbiotic dinoflagellates.

This study aimed to investigate the toxic and transcriptomic effects of the ultraviolet filter benzophenone-3 (BP-3) on Acropora tenuis and its symbiotic dinoflagellates while using acetone as a solvent. Seven-day exposure to 50 and 500 µg/L, which is higher than most BP-3 records from coastal waters, did not affect coral colour or dinoflagellate photosynthesis. Differentially expressed genes (DEGs) between seawater and solvent controls were <20 in both corals and dinoflagellates. Eleven coral DEGs were detected after treatment with 50 µg/L BP-3. Fourteen coral DEGs, including several fluorescent protein genes, were detected after treatment with 500 µg/L BP-3. In contrast, no dinoflagellate DEGs were detected in the BP-3 treatment group. These results suggest that the effects of 50-500 µg/L BP-3 on adult A. tenuis and its dinoflagellates are limited. Our experimental methods with lower acetone toxicity provide a basis for establishing standard ecotoxicity tests for corals.

Thermally activated persulfate (TAP)-enhanced tris(2-chloroethyl) phosphate removal in real-world waters based on a response-surface approach as well as toxicological evaluation on its degradation products.

As a typical organophosphorus flame retardant, tris(2-chloroethyl) phosphate (TCEP) is refractory in aqueous environment. The application of TAP is a promising method for removing pollutants. Herein, the removal of TCEP using TAP was rigorously investigated, and the effects of some key variables were optimized by the one-factor-at-a-time approach. To further evaluate the interactions among variables, the response surface methodology (RSM) based on central composite design was employed. Under optimized conditions (pH 5, [PS]0: [TCEP]0 = 500:1), the maximum removal efficiency (RE) of TCEP reached up to 90.6%. In real-world waters, the RE of TCEP spanned the range of 56%- 65% in river water, pond water, lake water and sanitary sewage. The low-concentration Cl- (0.1 mM) promoted TCEP degradation, but the contrary case occurred when the high-concentration Cl-, NO3-, CO32-, HCO3-, HPO42-, H2PO4-, NH4+ and humic acid were present owing to their prominently quenching effects on SO4•-. Both EPR and scavenger experiments revealed that the main radicals in the TAP system were SO4•- and •OH, in which SO4•- played the most crucial role in TCEP degradation. GC-MS/MS analysis disclosed that two degradation products appeared, sourcing from the replacement, oxidation, hydroxylation and water-molecule elimination reactions. The other two products were inferred from the comprehensive literature. As for acute toxicity to fish, daphnid and green algae, product A displayed the slightly higher toxicity, whereas other three products exhibited the declining toxicity as compared to their parent molecule. These findings offer a theoretical/practical reference for high-efficiency removal of TCEP and its ecotoxicological risk evaluation.

Ecotoxicological Evaluation of Bisphenol A and Alternatives: A Comprehensive In Silico Modelling Approach.

Bisphenol A (BPA), a compound widely used in industrial applications, has raised concerns due to its environmental impact. As a key component in the manufacture of polycarbonate plastics and epoxy resins used in many consumer products, concerns about potential harm to human health and the environment are unavoidable. This study seeks to address these concerns by evaluating a range of potential BPA alternatives, focusing on their ecotoxicological properties. The research examines 76 bisphenols, including BPA derivatives, using a variety of in silico ecotoxicological models, although it should be noted that these models were not developed exclusively for this particular class of compounds. Consequently, interpretations should be made with caution. The results of this study highlight specific compounds of potential environmental concern and underscore the need to develop more specific models for BPA alternatives that will allow for more accurate and reliable assessment.

A Theoretical Study on the Degradation Mechanism, Kinetics, and Ecotoxicity of Metronidazole (MNZ) in •OH- and SO4•--Assisted Advanced Oxidation Processes.

Metronidazole (MNZ), a typical example of nitroimidazole antibiotics, is widely used in the treatment of infectious diseases caused by anaerobic bacteria. The degradation mechanism and kinetics of MNZ in the presence of HO• and SO4•- were studied using density functional theory (DFT). It was confirmed that both HO• and SO4•- easily added to the carbon atom bonded to the NO2 group in the MNZ molecule as the most feasible reaction channel. This study shows that subsequent reactions of the most important product (M-P) include the O2 addition, hydrogen abstraction and bond breakage mechanisms. The rate constants of HO• and SO4•--initiated MNZ in the aqueous phase were calculated in the temperature range of 278-318 K. The total rate constants of MNZ with HO• and SO4•- were determined to be 8.52 × 109 and 1.69 × 109 M-1s-1 at 298 K, which were consistent with experimental values of (3.54 ± 0.42) × 109 and (2.74 ± 0.13) × 109 M-1s-1, respectively. The toxicity of MNZ and its degradation products to aquatic organisms has been predicted. The results proposed that the toxicity of the initial degradation product (M-P) was higher than that of MNZ. However, further degradation products of MNZ induced by HO• were not harmful to three aquatic organisms (fish, daphnia, and green algae). This study provides a comprehensive theoretical basis for understanding the degradation behavior of MNZ.

New insights into the degradation mechanism and risk assessment of HFPO-DA by advanced oxidation processes based on activated persulfate in aqueous solutions.

Hexafluoropropylene oxide dimer acid (HFPO-DA) is widely used as a substitute for perfluorooctanoic acid (PFOA). HFPO-DA exhibits high water solubility and low adsorption potential, conferring significant fluidity in aquatic environments. Given that the toxicity of HFPO-DA is similar to PFOA, it is necessary to control its content in aquatic environments. Electrochemical and thermally-activated persulfates have been successfully used to degrade HFPO-DA, but UV-activated persulfates cannot degrade the compound. Given that research on degradation mechanisms is still incomplete and lacks kinetic research, the mechanism and kinetic calculations of oxidative degradation were studied in detail using DFT calculations. And the toxicity of HFPO-DA degradation intermediates and products was evaluated to reveal the feasibility of using advanced oxidation process (AOP) technology based on persulfate to degrade HFPO-DA in wastewater. The results showed that the committed step of HFPO-DA degradation was initiated by the electron transfer reaction of SO4•- radicals. This reaction is not spontaneous at room temperature and requires sufficient electrical or thermal energy to be absorbed from the external environment. The perfluoroalcohol produced during this reaction can subsequently undergo four possible reactions: H atom abstraction from alcohol groups by an OH radical; H atom abstraction by SO4•-; direct HF removal; and HF removal with water as the catalyst. The final degradation products of HFPO-DA mainly include CO2, CF3CF2COOH, CF3COOH, FCOOH and HF, which has been identified through previous experimental analysis. Ecotoxicity assessment indicates that degradation does not produce highly toxic intermediates, and that the final products are non-toxic, supporting the feasibility of persulfate-based AOP technologies.

Field-portable seawater toxicity monitoring platform using lens-free shadow imaging technology.

The accidental spill of hazardous and noxious substances (HNSs) in the ocean has serious environmental and human health consequences. Assessing the ecotoxicity of seawater exposed to various HNS is challenging due to the constant development of new HNS or mixtures, and assessment methods are also limited. Microalgae viability tests are often used among the various biological indicators for ecotoxicity testing, as they are the primary producers in aquatic ecosystems. However, since the conventional cell growth rate test measures cell viability over three to four days using manual inspection under a conventional optical microscope, it is labor- and time-intensive and prone to subjective errors. In this study, we propose a rapid and automated method to evaluate seawater ecotoxicity by quantification of the morphological changes of microalgae exposed to more than 30 HNSs. This method was further validated using conventional growth rate test results. Dunaliella tertiolecta, a microalgae species without rigid cell walls, was selected as the test organism. Its morphological changes in response to HNS exposure were measured at the single cell level using a custom-developed device that uses lens-free shadow imaging technology. The ecotoxicity evaluation induced by the morphological change could be available in as little as 5 min using the proposed method and device, and it could be effective for 20 HNSs out of 30 HNSs tested. Moreover, the test results of six selected HNSs with high marine transport volume and toxicity revealed that the sensitivity of the proposed method extends to half the maximum effective concentration (EC50) and even to the lowest observed effective concentration (LOEC). Furthermore, the average correlation index between the growth inhibition test (three to four days) and the proposed morphology changes test (5 min) for the six selected HNSs was 0.84, indicating great promise in the field of various point-of-care water quality monitoring. Thus, the proposed equipment and technology may provide a viable alternative to traditional on-site toxicity testing, and the potential of rapid morphological analysis may replace traditional growth inhibition testing.

Pickering emulsion-enhanced Vibrio fischeri assay for ecotoxicity assessment of highly hydrophobic polycyclic aromatic hydrocarbons.

Accurate ecotoxicity assessment of contaminated soil is critical to public health, and the luminescent bacteria (Vibrio fischeri) method is the most commonly used. Hydrophobic compounds such as polycyclic aromatic hydrocarbons (PAHs) in soil cannot be in contact with luminescent bacteria due to their low water solubility so that the luminescence inhibitory effect cannot be observed. The underestimated biological toxicity makes the test unreliable and en-dangers public health and safety. The commonly adopted improved method of adding cosolvents has limited effect, it was only effective for low-hydrophobicity chemicals and could not be used for ecotoxicity evaluation of high-hydrophobicity chemicals. Therefore, we constructed Pickering emulsions using luminescent bacteria modified with n-dodecanol in which PAHs were dissolved in the oil phase, n-tetradecane. Then the luminescent bacteria could tightly adhere to the oil-water interface and contact PAHs. As a result, their bioluminescence was suppressed to varying degrees depending on the chemical species and concentrations. With no solubility limitation, highly hydrophobic PAHs could even completely inhibit bacterial bioluminescence, hence the toxicity information was accurately displayed and the median effect concentration (EC50) values could be calculated. This Pickering emulsion-based method was successfully applied for the accurate ecotoxicity evaluation of highly hydrophobic PAHs and soil samples contaminated with them, which all previous methods could not achieve. This method overcomes the problem of ecotoxicity evaluation of hydrophobic compounds, and has great potential for practical application, whether it is pure chemicals or various real samples from the ecological environment.

Activation of persulfate by vanadium oxide modified carbon nanotube for 17ß-estradiol degradation in soil: Mechanism, application and ecotoxicity assessment.

Steroid hormones in the environment have attracted public attention because of their high endocrine-disrupting activity even at rather low exposure level. Excessive hormones in the soil from the pollutant discharge of intensive farming would pose a potential threat to the ecology and the human health. Vanadium oxide modified carbon nanotube (VOX-CNT) was synthesized and applied as persulfate (PDS) activator to reduce17ß-estrogen (17ß-E2) in soil. 86.06 % 17ß-E2 could be degraded within 12 h. Process of materials exchange during oxidation was interfered by soil, resulting in insufficient degradation of 17ß-E2, but the active species involved in 17ß-E2 degradation would also be enriched by it. 17ß-E2 was adsorbed on the VOX-CNT surface and directly degraded mainly by the active species generated on the catalyst surface, and •OH dominated the degradation of 17ß-E2 in VOX-CNT/PDS system. CO, defective sites and vanadium oxides on the surface of VOX-CNT contributed to the generation of activate species. Oxidizer dosage, catalyst dosage, water-soil ratio and soil properties would affect the degradation of 17ß-E2. The ecotoxicological impact on soil caused by VOX-CNT/PDS was acceptable, and would be weakened with time. Additionally, a rapid decrease in the concentration of 17ß-E2 and the promotion of maize growth were observed with VOX-CNT/PDS in situ pilot-scale remediation. Those results reveal that VOX-CNT/PDS is a potential technology to remove excessive steroid hormone from soil around large-scale livestock and poultry farms.

Ozonation of Selected Pharmaceutical and Personal Care Products in Secondary Effluent-Degradation Kinetics and Environmental Assessment.

The efficiency of ozonation depends on the water matrix and the reaction time. Herein, these factors were addressed by assessing the removal of five pharmaceutical and personal care products (PPCPs) by ozonation. The main aims were: (i) to assess the effects of the water matrix on the degradation kinetics of PPCPs, individually and in mixture, following ozonation; and (ii) to assess the ecotoxicological impact of the ozone reaction time on the treatment of a spiked municipal wastewater (MW) added the five PPCPs over several species. The degradation of the PPCPs was faster in ultrapure water, with all PPCPs being removed in 20 min, whereas in the MW, a 30 min ozonation period was required to achieve a removal close to 100%. Increasing the number of PPCPs in the water matrix did not affect the time required for their removal in the MW. Regarding the ecotoxicity assessment, Raphidocelis subcapitata and Daphnia magna were the least sensitive species, whereas Lemna minor was the most sensitive. The temporal variation of the observed effects corroborates the degradation of the added PPCPs and the formation of toxic degradation by-products. The removal of the parent compounds did not guarantee decreased hazardous potential to biological species.

Experimental validation of stability and applicability of Start Growth Time method for high-throughput bacterial ecotoxicity assessment.

Ecotoxicity assessments based on bacteria as model organisms are widely used for routine toxicity screening because it has the advantages of time-saving, high sensitivity, cost-effectiveness, and less ethical responsibility. Determination of ecotoxicity effect via bacterial growth can avoid the restriction of model bacteria selection and unique equipment requirements, but traditional viable cell count methods are relatively labor- and time-intensive. The Start Growth Time method (SGT) is a high-throughput and time-conserving method to determine the amount of viable bacterial cells. However, its usability and stability for ecotoxicity assessment are rarely studied. This study confirmed its applicability in terms of bacterial types (gram-positive and gram-negative), growth phases (middle exponential and early stationary phases), and simultaneous existence of dead cells (adjustment by flow cytometry). Our results verified that the stability of establishing SGT correlation is independent of the bacterial type and dead-cell portion. Moreover, we only observed the effect of growth phases on the slope value of established SGT correlation in Shewanella oneidensis, which suggests that preparing inoculum for the SGT method should be consistent in keeping its stability. Our results also elucidate that the SGT values and the live cell percentages meet the non-linear exponential correlation with high correlation coefficients from 0.97 to 0.99 for all the examined bacteria. The non-linear exponential correlation facilitates the application of the SGT method in the ecotoxicity assessment. Finally, applying the exponential SGT correlation to evaluate the ecotoxicity effect of copper ions on E. coli was experimentally validated. The SGT-based method would require about 6 to 7 h to finish the assessment and obtain an estimated EC50 at 2.27 ± 0.04 mM. This study demonstrates that the exponential SGT correlation can be a high-throughput, time-conversing, and wide-applicable method for bacterial ecotoxicity assessment.

Pyrolytic Remediation and Ecotoxicity Assessment of Fuel-Oil-Contaminated Soil.

Oil-contaminated soil is a major societal problem for humans and the environment. In this study, the pyrolysis method was applied to oil-contaminated soil used as a landfill and gas station site in Korea. The removal efficiency of the main components of oil-contaminated soils, such as total petroleum hydrocarbons (TPH), polyaromatic hydrocarbons (PAHs), unresolved complex mixture (UCM), and alkylated PAHs (Alk-PAHs) were measured, and the effect of temperature, treatment time, and moisture content on pyrolysis efficiency was studied. In order to evaluate the risk of soil from which pollutants were removed through pyrolysis, integrated ecotoxicity was evaluated using Daphnia magna and Allivibrio fischeri. The chemical and biological measurements in this study include contaminants of emerging concerns (CECs). Results showed that the pyrolysis was more efficient with higher treatment temperatures, moisture content, and treatment times. In addition, toxicity was reduced by 99% after pyrolysis, and the degree of toxicity was evaluated more sensitively in Allivibrio fischeri than in Daphnia magna. This study shows that weathered oil-contaminated soil can be effectively treated in a relatively short time through pyrolysis, as well as provides information on efficient conditions and the assessment of ecotoxicity.

Visible light driven antibiotics degradation using S-scheme Bi2WO6/CoIn2S4 heterojunction: Mechanism, degradation pathways and toxicity assessment.

S-scheme heterojunction photocatalysts with strong redox ability and excellent photocatalytic activity are highly desired for photocatalytic degradation of pollutants. Herein, S-scheme Bi2WO6/CoIn2S4 heterojunctions were synthesized using hydrothermal method. The photo-induced carriers transfer mechanism of the S-scheme Bi2WO6/CoIn2S4 heterojunction was clarified by band structure analysis, ultraviolet photoelectron spectrometer (UPS), electron spin resonance (ESR) and radical trapping experiments. Significant enhance of light absortion, and more efficient carriers separation were observed from the Bi2WO6/CoIn2S4 with CoIn2S4 nanoclusters growing on the surface of petal-like Bi2WO6 nanosheets. TC degradation efficiency of 90% was achieved by Bi2WO6/CoIn2S4 (15:1) within 3 h of irradiation, and ·O2-and ·OH radicals were dominated contributors. Possible decomposition pathways of TC were proposed, and ECOSAR analysis showed that most of the intermediates exhibited lower ecotoxicity than TC. This work provides reference on the constructing ternary-metal-sulfides-based S-scheme heterojunctions for improving photocatalytic performance.

Assessment of the Influence of Size and Concentration on the Ecotoxicity of Microplastics to Microalgae Scenedesmus sp., Bacterium Pseudomonas putida and Yeast Saccharomyces cerevisiae.

The harmful effects of microplastics are not yet fully revealed. This study tested harmful effects of polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), and polyethylene terephthalate (PET) microplastics were tested. Growth inhibition tests were conducted using three microorganisms with different characteristics: Scenedesmus sp., Pseudomonas putida, and Saccharomyces cerevisiae. The growth inhibition test with Scenedesmus sp. is relatively widely used, while the tests with Pseudomonas putida and Saccharomyces cerevisiae were, to our knowledge, applied to microplastics for the first time. The influence of concentration and size of microplastic particles, in the range of 50-1000 mg/L and 200-600 µm, was tested. Determined inhibitions on all three microorganisms confirmed the hazardous potential of the microplastics used. Modeling of the inhibition surface showed the increase in harmfulness with increasing concentration of the microplastics. Particle size showed no effect for Scenedesmus with PE, PP and PET, Pseudomonas putida with PS, and Saccharomyces cerevisiae with PP. In the remaining cases, higher inhibitions followed a decrease in particle size. The exception was Scenedesmus sp. with PS, where the lowest inhibitions were obtained at 400 µm. Finally, among the applied tests, the test with Saccharomyces cerevisiae proved to be the most sensitive to microplastics.

Screening of metallic pollution in complex environmental samples through a transcriptomic fingerprint method.

Characterizing waste ecotoxicity is laborious because of both the undefined nature of environmental samples and the diversity of contaminants that can be present. With regard to these limitations, traditional approaches do not provide information about the nature of the pollution encountered. To improve such assessments, a fluorescent library of 1870 transcriptomic reporters from Escherichia coli K12 MG1655 was used to report the ecotoxic status of environmental samples. The reliability of the approach was evaluated with 6 metallic pollutants (As, Cu, Cd, Hg, Pb, Zn) used alone and in mixture in pure and complex matrices. A total of 18 synthetic samples were used to characterize the specificity of the resulting metallic contamination fingerprints. Metallic contamination impacted 4.5 to 10.2% of the whole transcriptomic fingerprint of E. coli. The analysis revealed that a subset of 175 transcriptomic reporters is sufficient to characterize metallic contamination, regardless of the nature of the sample. A statistical model distinguished patterns due to metallic contamination and provided information about the level of toxicity with 93 to 98% confidence. The use of the transcriptomic assessment was validated for 17 complex matrices with various toxicities and metal contaminants, such as activated sludge, wastewater effluent, soil, wood and river water. The presence of metals and their associated toxicity, which seems linked to their bioavailabilities, were thereby determined. This method constitutes a possible tool to screen unknown complex samples for their metallic status and identify those for which a deeper characterization must be achieved by the use of traditional biosensors and analytical methods.