Alleviation of arsenic stress in pakchoi by foliar spraying of engineered nanomaterials.

Addressing heavy metal contamination in leafy vegetables is critically important due to its adverse effects on human health. In this study, we investigated the inhibitory effects of foliar spraying with four nanoparticles (CeO2, ZnO, SiO2, and S NPs) on arsenic (As) stress in pakchoi (Brassica rapa var. Chinensis). The findings reveal that foliar application of ZnO NPs at 1 ~ 2.5 mg plant-1 and CeO2 NPs at 5 mg plant-1 significantly reduces As in shoots by 40.9 ~ 47.3% and 39.4%, respectively. Moreover, 5 mg plant-1 CeO2 NPs increased plant height by 6.06% and chlorophyll a (Chla) content by 30.2% under As stress. Foliar spraying of CeO2 NPs at 0.2-5 mg plant-1 also significantly enhanced superoxide dismutase (SOD) activity in shoots by 9.4 ~ 13.9%, lowered H2O2 content by 42.4 ~ 53.25%, and increased root protein contents by 79 ~ 109.2%. CeO2 NPs regulate the As(III)/As(V) ratio, aiding in As efflux from roots and thereby reducing As toxicity to plants. In vitro digestion experiments reveal that the consumption of CeO2 NPs carries the lowest health risk of As. In addition, foliar spraying of ZnO NPs at 1 ~ 2.5 mg plant-1 can suppress plant As uptake by modulating enzyme activity, reducing leaf damage, and enhancing chlorophyll content. The study demonstrates that high CeO2 NP concentrations and suitable ZnO NP concentrations can alleviate As toxicity in pakchoi, consequently reducing human health risks.

Foliar application of selenium and gibberellins reduce cadmium accumulation in soybean by regulating interplay among rhizosphere soil metabolites, bacteria community and cadmium speciation.

Both selenium (Se) and gibberellins (GA3) can alleviate cadmium (Cd) toxicity in plants. However, the application of Se and GA3 as foliar spray to against Cd stress on soybean and its related mechanisms have been poorly explored. Herein, this experiment evaluated the effects of Se and GA3 alone and combined application on soybean rhizosphere microenvironment, Cd accumulation and growth of soybean seedlings. The results revealed that both Se and GA3 can effectively decrease the accumulation of Cd in soybean seedlings. Foliar application of Se, GA3 and their combination reduced Cd contents in soybean seedlings respectively by 21.70 %, 27.53 % and 45.07 % when compared with the control treatment, suggest a synergistic effect of Se and GA3 in decreasing Cd accumulation. Se and GA3 also significantly increased diversity and abundance of the metabolites in rhizosphere, which consequently played an important role in shaping rhizosphere bacteria community and improve rhizosphere soil physicochemical properties of Cd contaminated soil, as well as decreased the Cd available forms contents but enhance the immobilized form levels. Overall, this study affords a novel approach on mitigating Cd accumulation in soybean seedlings which is attributed to Se and GA3 regulated interplay among rhizosphere soil metabolites, bacteria community and cadmium speciation.

Foliar spraying of zinc oxide nanoparticles improves water transport and nitrogen metabolism in tomato (Solanum lycopersicum L.) seedlings mitigating the negative impacts of cadmium.

The use of bio-nanotechnology in agriculture-such as the biological applications of metal oxide nanoparticles (NPs)-greatly improves crop yield and quality under different abiotic stress factors including soil metal contamination. Here, we explore the effectiveness of zinc oxide (ZnO)-NPs (0, 50 mg/L) foliar spraying to ameliorate the detrimental effects of cadmium (Cd) on the water transport and nitrogen metabolism in tomato (Solanum lycopersicum Mill. cv. Chibli F1) plants grown on a Cd-supplied (CdCl2; 0, 10, 40 µM) Hoagland nutrient solution. The results depicted that the individually studied factors (ZnO-NPs and Cd) had a significant impact on all the physiological parameters analyzed. Independently to the Cd concentration, ZnO-NPs-sprayed plants showed significantly higher dry weight (DW) in both leaves and roots compared to the non-sprayed ones, which was in consonance with higher and lower levels of Zn2+ and Cd2+ ions, respectively, in these organs. Interestingly, ZnO-NPs spraying improved water status in all Cd-treated plants as evidenced by the increase in root hydraulic conductance (L0), apoplastic water pathway percentage, and leaf and root relative water content (RWC), compared to the non-sprayed plants. This improved water balance was associated with a significant accumulation of osmoprotectant osmolytes, such as proline and soluble sugars in the plant organs, reducing electrolyte leakage (EL), and osmotic potential (ψπ). Also, ZnO-NPs spraying significantly improved NO3- and NH4+ assimilation in the leaf and root tissues of all Cd-treated plants, leading to a reduction in NH4+ toxicity. Our findings point out new insights into how ZnO-NPs affect water transport and nitrogen metabolism in Cd-stressed plants and support their use to improve crop resilience against Cd-contaminated soils.

Potential of Plant-Based Extracts to Alleviate Sorbitol-Induced Osmotic Stress in Cabbage Seedlings.

In light of expected climate change, it is important to seek nature-based solutions that can contribute to the protection of our planet as well as to help overcome the emerging adverse changes. In an agricultural context, increasing plant resistance to abiotic stress seems to be crucial. Therefore, the scope of the presented research was focused on the application of botanical extracts that exerted positive effects on model plants growing under controlled laboratory conditions, as well as plants subjected to sorbitol-induced osmotic stress. Foliar spraying increased the length and fresh mass of the shoots (e.g., extracts from Taraxacum officinale, Trifolium pratense, and Pisum sativum) and the roots (e.g., Solidago gigantea, Hypericum perforatum, and Pisum sativum) of cabbage seedlings grown under stressful conditions, as well as their content of photosynthetic pigments (Pisum sativum, Lens culinaris, and Hypericum perforatum) along with total phenolic compounds (Hypericum perforatum, Taraxacum officinale, and Urtica dioica). The antioxidant activity of the shoots measured with the use of DDPH (Pisum sativum, Taraxacum officinale, Urtica dioica, and Hypericum perforatum), ABTS (Trifolium pratense, Symphytum officinale, Valeriana officinalis, Pisum sativum, and Lens culinaris), and FRAP (Symphytum officinale, Valeriana officinalis, Urtica dioica, Hypericum perforatum, and Taraxacum officinale) assays was also enhanced in plants exposed to osmotic stress. Based on these findings, the most promising formulation based on Symphytum officinale was selected and subjected to transcriptomic analysis. The modification of the expression of the following genes was noted: Bol029651 (glutathione S-transferase), Bol027348 (chlorophyll A-B binding protein), Bol015841 (S-adenosylmethionine-dependent methyltransferases), Bol009860 (chlorophyll A-B binding protein), Bol022819 (GDSL lipase/esterase), Bol036512 (heat shock protein 70 family), Bol005916 (DnaJ Chaperone), Bol028754 (pre-mRNA splicing Prp18-interacting factor), Bol009568 (heat shock protein Hsp90 family), Bol039362 (gibberellin regulated protein), Bol007693 (B-box-type zinc finger), Bol034610 (RmlC-like cupin domain superfamily), Bol019811 (myb_SHAQKYF: myb-like DNA-binding domain, SHAQKYF class), Bol028965 (DA1-like Protein). Gene Ontology functional analysis indicated that the application of the extract led to a decrease in the expression of many genes related to the response to stress and photosynthetic systems, which may confirm a reduction in the level of oxidative stress in plants treated with biostimulants. The conducted studies showed that the use of innovative plant-based products exerted positive effects on crops and can be used to supplement current cultivation practices.

Effects of foliar application of Zn combined with organic matters on Cd accumulation and its chemical forms in rice.

Rice consumption is a key Cd exposure pathway, which poses a health risk to humans. Reducing cadmium (Cd) concentrations in rice remains challenging. In this study, a pot experiment was conducted to examine the effects of foliar spray of Zn combined with organic matters (including Zn-lysine (Zn-Lys), Zn-fulvic acid (Zn-FA), Zn-amino acid (Zn-AA), and Zn combined with glutathione (Zn + GSH)) on Cd accumulation in rice grains. Compared with the control group, all treatment groups exhibited reduced Cd concentration in rice grains, while improving plant growth, and reducing Cd transport from other tissues to the grains. Zn-FA was found to be the most effective fertilizer, which considerably reduced Cd concentrations in grains from 0.77 ± 0.068 to 0.14 ± 0.021 mg/kg and yielded reductions of up to 81%, which is within the Chinese food maximum tolerable limit of 0.2 mg/kg. Furthermore, the analysis of the chemical forms of Cd of rice tissues indicated that the treatment groups had increased proportions of integrated with pectates and protein in the stems. Except for the group treated with Zn-Lys spray, the percentages of undissolved Cd phosphate in the leaves were increased in all treatment groups, which reduced Cd toxicity to rice plants. The foliar application of Zn combined with organic matters may be a promising strategy to decrease Cd concentration in rice grains cultivated in severely Cd-contaminated agricultural soil, particularly in the karst area in southwest China with limited available cultivable agricultural land.

Effects of Exogenous Abscisic Acid on the Physiological and Biochemical Responses of Camellia oleifera Seedlings under Drought Stress.

This study comprehensively investigates the physiological and molecular regulatory mechanisms of Camellia oleifera seedlings under drought stress with a soil moisture content of about 30%, where exogenous abscisic acid (ABA) was applied via foliar spraying at concentrations of 50 µg/L, 100 µg/L, and 200 µg/L. The results demonstrated that appropriate concentrations of ABA treatment can regulate the physiological state of the seedlings through multiple pathways, including photosynthesis, oxidative stress response, and osmotic balance, thereby aiding in the restructuring of their drought response strategy. ABA treatment effectively activated the antioxidant system by reducing stomatal conductance and moderately inhibiting the photosynthetic rate, thus alleviating oxidative damage caused by drought stress. Additionally, ABA treatment promoted the synthesis of osmotic regulators such as proline, maintaining cellular turgor stability and enhancing the plant's drought adaptability. The real-time quantitative PCR results of related genes indicated that ABA treatment enhanced the plant's response to the ABA signaling pathway and improved disease resistance by regulating the expression of related genes, while also enhancing membrane lipid stability. A comprehensive evaluation using a membership function approach suggested that 50 µg/L ABA treatment may be the most-effective in mitigating drought effects in practical applications, followed by 100 µg/L ABA. The application of 50 µg/L ABA for 7 h induced significant changes in various biochemical parameters, compared to a foliar water spray. Notably, superoxide dismutase activity increased by 17.94%, peroxidase activity by 30.27%, glutathione content by 12.41%, and proline levels by 25.76%. The content of soluble sugars and soluble proteins rose by 14.79% and 87.95%, respectively. Additionally, there was a significant decrease of 31.15% in the malondialdehyde levels.

Chitosan nanoparticles modulate plant growth, and yield, as well as thrips infestation in Capsicum spp.

The objective of this study was to investigate the physiological and biochemical effects of Chitosan nanoparticles on Capsicum annuum plants. The particle size, polydispersity index, composition, and structure of the synthesized chitosan-based nanoparticles (Chitosan (CS), Chitosan-Silver (CSAg), and Chitosan-Copper (CSCu) NPs) were determined by analyzing the zeta potential, FTIR, TEM, and XRD. The seedlings showed improved physiological and biochemical characteristics when 1, 10, and 20 ppm concentrations of nanoparticles (CS, CSAg, and CSCu) were used for 24-h seed priming. The application of nanoparticles in different concentrations (0, 20, 40, 60, 80, and 100 ppm) on the leaves of Capsicum spp. plants resulted in improved physiological traits and protection against thrips by 70-85 %. Furthermore, it enhanced the content of chlorophyll (20-75 %), carotenoids (20-30 %), total phenolics (20-45 %), total flavonoids (40-125 %), reducing sugars (15-40 %), total antioxidant activity (10-82 %), FRAP (10-100 %), DPPH (76-83 mg mL-1) activity, and total capsaicinoids (125-142 %). Therefore, the use of chitosan-based nanoparticles could be considered an environmentally friendly approach to enhance secondary metabolite production, disease resistance, and growth in Capsicum spp. plants for sustainable production.

Effect of copper oxide and zinc oxide nanoparticles on photosynthesis and physiology of Raphanus sativus L. under salinity stress.

The study evaluates the impact of two metal oxide nanoparticles: copper oxide (CuO) and zinc oxide (ZnO) on the growth and physiology of Raphanus sativus L. (radish) under salinity stress. Fifteen days old seedlings of R. sativus were subjected to different concentrations of salt stress (0 mM, 150 mM, and 300 mM NaCl) alone and in interaction with 100 mgL-1 metal oxide nanoparticle treatments (CuO and ZnO NPs via foliar spray) for 15 days. The results confirmed the severe effects of salinity stress on the growth and physiology of radish plants by decreasing nutrient uptake, leaf area, and photosystems photochemistry and by increasing proline accumulation, anthocyanin, flavonoids content, and antioxidant enzyme activities which is directly linked to increased oxidative stress. The foliar application of CuO and ZnO NPs alleviated the adverse effects of salt stress on radish plants, as indicated by improving these attributes. Foliar spray of ZnO NPs was found efficient in improving the leaf area, photosynthetic electron transport rate, the PSII quantum yield, proton conductance and mineral content in radish plants under NaCl stress. Besides, ZnO NPs decreased the NaCl-induced oxidative stress by declining proline, anthocyanin, and flavonoids contents and enzymatic activities such as superoxide dismutase (SOD), ascorbate peroxidase (APX) and guaiacol peroxidase (GOPX). Thus, our study revealed that ZnO NPs are more effective and have beneficial effects over CuO NPs in promoting growth and reducing the adverse effects of NaCl stress in radish plants.

Sustainability in Aquaponics: Industrial Spirulina Waste as a Biofertilizer for Lactuca sativa L. Plants.

Aquaponics represents an alternative to traditional soil cultivation. To solve the problem of nutrient depletion that occurs in this biotechnological system, the application of a spirulina-based biofertilizer was assessed. The microalgal waste used in this study came from industrial processing. Four different dilutions of the supernatant portion of this waste were sprayed on lettuce plants cultivated in an aquaponics system installed at the Botanical Gardens of the Tor Vergata University of Rome. The biofertilizer was characterized to evaluate its amount of macro- and micronutrients. The analysis conducted on the plants involved both morpho-biometric aspects and qualitative-quantitative measurements. The experiments showed that the spirulina extract had a positive effect on the growth and nutraceutical content of the lettuce plants; the obtained results highlighted that a dilution of 75% was the best for treatment. The use of the proposed organic and recycled fertilizer could increase the sustainability of crop cultivation and promote the functioning of aquaponics systems.

Enhancing wheat production and quality in alkaline soil: a study on the effectiveness of foliar and soil applied zinc.

Cultivation of high-yield varieties and unbalanced fertilization have induced micronutrient deficiency in soils worldwide. Zinc (Zn) is an essential nutrient for plant growth and its deficiency is most common in alkaline and calcareous soils. Therefore, this study aimed to evaluate the effect of Zn applied either alone or in combination with foliar application on the quality and production of wheat grown in alkaline soils. Zn was applied in the form of zinc sulfate (ZnSo4) to the soil and as a foliar spray during the sowing and tillering stages, respectively. Results showed that Zn fertilization of wheat, irrespective of modes of application, significantly increased grain and biological yield, grain per spike, and 1,000 grains weight over control; however, its effect was more noticeable when applied as 7.5 kg ha-1 of soil Zn combined with foliar Zn at 2.5 kg ha-1. Zn application significantly increased the grain protein content from 9.40% in the control to a maximum of 11.83% at soil Zn of 10 kg ha-1. Similarly, Zn application improved Zn, phosphorus (P), and potassium (K) concentrations in wheat grains. Moreover, correlation analysis showed that the grain Zn concentration was positively correlated with the grain P concentration. The correlation between P concentration in wheat grains and 1,000 grain weight was not significant. A total of 1,000 grains weight was positively correlated with tillers per plant, grain yield, and biological yield. There were positive correlations between protein content, biological yield, grain yield, and tillers per plant. Therefore, soil-applied Zn + foliar application in alkaline soils with limited Zn availability is crucial for improving wheat yield and grain quality.

1H-NMR Metabolomics Study after Foliar and Endo-Therapy Treatments of Xylella fastidiosa subsp. pauca Infected Olive Trees: Medium Time Monitoring of Field Experiments.

Here we report the medium-term effects of foliar spray and endo-therapy treatments with different doses of a Cu/Zn citric acid biocomplex (Dentamet®) in Xylella fastidiosa infected olive trees of Salento, Apulia region (South-east Italy). Leaf extract samples from field-treated 150 years old olive trees cvs Ogliarola salentina and Cellina di Nardò were studied by 1H NMR-based metabolomics. The result of different applications of Dentamet® endo-therapy after 60, 120 and 180 days in comparison with traditional foliar spray treatment and water injection as a control have been investigated. The metabolic profile analyses, performed by 1H NMR-based metabolomic approach, indicated plant metabolites variations connected to the disease progression such as mannitol, quinic acid, and oleuropein related compounds. The best results, in terms of discrimination of the metabolic profiles with respect to water injection, were found for monthly endo-therapy treatments. Dentamet® foliar application demonstrated more specific time related progressive effectiveness with respect to intravascular treatments. Therefore, besides a possible more effective performance of endo-therapy with respect to foliar treatments, the need of further doses/frequencies trimming to obtain long-term results was also assessed. The present field studies confirmed the indication of Dentamet® effectiveness in metabolic variation induction, potentially linked with reducing the X. fastidiosa subspecies pauca related Olive Quick Decline Syndrome (OQDS) symptoms development.

Tomato and Pepper Leaf Parts Contribute Differently to the Absorption of Foliar-Applied Potassium Dihydrogen Phosphate.

Foliar fertilisation is an application technique that is increasingly being used in agriculture and offers the possibility of providing nutrients directly to the site of highest demand. Especially for phosphorus (P), foliar application is an interesting alternative to soil fertilisation, but foliar uptake mechanisms are poorly understood. To gain a better understanding of the importance of leaf surface features for foliar P uptake, we conducted a study with tomato (Solanum lycopersicum) and pepper (Capsicum annuum) plants, which have different leaf surface traits. For this purpose, drops of 200 mM KH2PO4 without surfactant were applied onto the adaxial or abaxial leaf side or to the leaf veins and the rate of foliar P absorption was evaluated after one day. Additionally, leaf surfaces were characterised in detail by transmission electron microscopy (TEM) and scanning electron microscopy (SEM), estimating also leaf surface wettability and free energy, among other parameters. While the leaves of pepper hardly contained any trichomes, the abaxial side and the leaf veins of tomato leaves were densely covered with trichomes. The cuticle of tomato leaves was thin (approximately 50 nm), while that of pepper was thick (approximately 150-200 nm) and impregnated with lignin. Due to the fact that trichomes were most abundant in the leaf veins of tomato, dry foliar fertiliser drop residues were observed to be anchored there, and the highest P uptake occurred via tomato leaf veins, resulting in 62% increased P concentration. However, in pepper, the highest rate of P absorption was recorded after abaxial-side P treatment (+66% P). Our results provide evidence that different leaf parts contribute unequally to the absorption of foliar-applied agrochemicals, which could potentially be useful for optimising foliar spray treatments in different crops.

Generalizing routes of plant exposure to pesticides by plant uptake models to assess pesticide application efficiency.

Pesticide application techniques are critical not only for integrated pest management (IPM) but also for food and environmental safety. Assessing pesticide application efficiency on plants can help optimize IPM and reduce pesticide environmental impacts. With hundreds of pesticides registered for use in agriculture, this study proposed a modeling approach based on plant uptake models for generalizing routes of plant chemical exposures that can correspond to different types of pesticide application methods and evaluating their respective efficiency on plants. Three representative pesticide application methods (i.e., drip irrigation, foliar spray, and broadcast application) were selected for modeling simulations. The simulation results for three representative pesticides (i.e., halofenozide, pymetrozine, and paraquat) revealed that the soil-based transpiration exposure route facilitated the bioaccumulation of moderately lipophilic compounds in leaves and fruits. While the plant surface-based exposure route (i.e., leaf cuticle penetration) made it easier for highly lipophilic compounds to enter plants, moderately lipophilic pesticides (i.e., log KOW ∼ 2) were more soluble in phloem sap, which enhanced their subsequent transport within plant tissues. In general, moderately lipophilic pesticides had the highest simulated residue concentrations in plant tissues for the three specific application methods, indicating they had the highest application efficiency due to their enhanced uptake routes (via transpiration and surface penetration) and increased solubility in xylem and phloem saps. Compared to foliar spray and broadcast application, drip irrigation produced higher residue concentrations for a wide variety of pesticides, exhibiting the highest application efficiency for many pesticides, especially for moderately lipophilic compounds. Future research should incorporate plant growth stages, crop safety, pesticide formulations, and multiple application events into the modeling approach for understanding pesticide application efficiency evaluation.

Foliar zinc reduced Cd accumulation in grains by inhibiting Cd mobility in the xylem and increasing Cd retention ability in roots1.

Cadmium (Cd) pollution endangers the safe utilization of paddy soils, and foliar zinc (Zn) can reduce the toxic effects of Cd. However, little is known about the effects of foliar Zn application on the transport and immobilization of Cd in key rice tissues and the physiological state of rice plants. A pot experiment was conducted to explore the effects of spraying 0.2% and 0.4% Zn (ZnSO4) during the early grain-filling stage on Cd transport in rice, photosynthesis, glutathione (GSH) levels, Cd concentrations in xylem sap, and the expression of Zn transporter genes. The results showed that grain Cd concentrations in the 0.2% Zn and 0.4% Zn treatments were 24% and 31% lower, respectively, than those of the control treatments at maturity. Compared with the control treatments, the 0.4% Zn treatment increased Cd by 60%, 69%, 23%, and 22% in husks, rachises, first internodes, and roots, respectively. Application of Zn reduced xylem Cd content by up to 26% and downregulated transporter genes (OSZIP12, OSZIP4, and OSZIP7a) in flag leaves. Foliar Zn increased Cd bioaccumulation in roots while decreasing Cd bioaccumulation in grains. Zn reduced GSH concentration in flag leaves and stems, inhibiting photosynthesis (intercellular CO2 concentration, transpiration rate). Taken together, foliar Zn can reduce the expression of Zn transporter genes and the mobility of Cd in the xylem, promoting the fixation of Cd in husks, rachises, first internodes, and roots, ultimately reducing Cd concentration in rice grains.

Effect of methods application of copper nanoparticles in the growth of avocado plants.

The aim of this greenhouse study was to evaluate root irrigation, foliar spray, and stem injection in order to find the best method for the nanofertilization of avocado plants with green synthesized CuNPs. One-year-old avocado plants were supplied four times (every 15 days) with 0.25 and 0.50 mg/ml of CuNPs through the three fertilization methods. Stem growth and new leaf formation were evaluated over time and after 60 days of CuNPs exposure, several plant traits (root growth, fresh and dry biomass, plant water content, cytotoxicity, photosynthetic pigments, and total Cu accumulation in plant tissues) were evaluated for CuNPs improvement. Regarding the control treatment, stem growth and new leaf appearance were increased by 25 % and 85 %, respectively, by the CuNPs supply methods of foliar spray>stem injection>root irrigation, with little significant differences among NPs concentrations. Avocado plants supplied with 0.25 and 0.50 mg/ml CuNPs maintained a hydric balance and cell viability ranged from 91 to 96 % through the three NPs application methods. TEM did not reveal any ultrastructural organelle changes induced by CuNPs in leaf tissues. The concentrations of CuNPs tested were not high enough to exert deleterious effects on the photosynthetic machinery of avocado plants, but photosynthetic efficiency was also found to be improved. The foliar spray method showed improved uptake and translocation of CuNPs, with almost no loss of Cu. In general, the improvement in plant traits indicated that the foliar spray method was the best for nanofertilization of avocado plants with CuNPs.

Integrating Application Methods and Concentrations of Salicylic Acid as an Avenue to Enhance Growth, Production, and Water Use Efficiency of Wheat under Full and Deficit Irrigation in Arid Countries.

As water deficit in arid countries has already become the norm rather than the exception, water conservation in crop production processes has become very critical. Therefore, it is urgent to develop feasible strategies to achieve this goal. Exogenous application of salicylic acid (SA) has been proposed as one of the effective and economical strategies for mitigating water deficit in plants. However, the recommendations concerning the proper application methods (AMs) and the optimal concentrations (Cons) of SA under field conditions seem contradictory. Here, a two-year field study was conducted to compare the effects of twelve combinations of AMs and Cons on the vegetative growth, physiological parameters, yield, and irrigation water use efficiency (IWUE) of wheat under full (FL) and limited (LM) irrigation regimes. These combinations included seed soaking in purified water (S0), 0.5 mM SA (S1), and 1.0 mM SA (S2); foliar spray of SA at concentrations of 1.0 mM (F1), 2.0 mM (F2), and 3.0 mM (F3); and combinations of S1 and S2 with F1 (S1F1 and S2F1), F2 (S1F2 and S2F2), and F3 (S1F3 and S2F3). The results showed that the LM regime caused a significant reduction in all vegetative growth, physiological, and yield parameters, while it led to an increase in IWUE. The application of SA through seed soaking, foliar application, and a combination of both methods increased all of the studied parameters in all the evaluated times, resulting in higher values for all parameters than the treatment without SA (S0). The multivariate analyses, including principal component analysis and heatmapping, identified the foliar application method with 1-3 mM SA alone or in combination with seed soaking with 0.5 mM SA as the best treatments for the optimal performance of wheat under both irrigation regimes. Overall, our results indicated that exogenous application of SA has the potential to greatly improve growth, yield, and IWUE under limited water application, while optimal coupling combinations of AMs and Cons were required for positive effects in field conditions.

Foliar application of selenium affecting pollen viability, grain chalkiness, and transporter genes in cadmium accumulating rice cultivar: A pot study.

Under Cadmium (Cd) stress, rice grain quality and quantity are compromised, affecting human health. Application of Selenium (Se) mitigating Cd stress in rice was already reported, but its role in rescuing Cd induced damage in the reproductive parts in rice plants has not been studied before. To investigate the underlying mechanism, Se mediated alleviation of Cd-stress induced damage to pollen viability, germination rate, and grain chalkiness were studied. A grain Cd accumulating rice genotype was selected and treated with 10 µM Cd and sprayed with 5 µM Se during tillering, elongating and heading stages. A significant reduction in pollen viability, germination percentage, and accumulation of higher amount of ROS in the reproductive parts were observed in Cd treated plants. However, Se supplementation (i.e. Cd + Se), decreased the ROS accumulation in anther, pistil, pollen and enhanced the pollen viability and germination percentage. Cd translocation was prevented from flag leaf to grains, under Se treatment. As a result, a significantly higher seed setting rate, and yield were observed. Additionally, Se improved grain nutrient content and grain quality. Therefore, the recent study suggests that the use of foliar spray of Se could be a cost-effective strategy to prevent Cd-induced yield loss and quality in rice.

Strengthening leaf physiological functioning and grain yield formation in heat-stressed wheat through potassium application.

Wheat crops are highly sensitive to high temperatures during their reproductive and grain-filling phases. We hypothesized that potassium could increase thermotolerance in wheat during grain filling by protecting cellular organelles, particularly chlorophyll, from heat injury. Two wheat genotypes, Ujala-16 (relatively heat tolerant) and Anaj-17 (relatively susceptible) were grown in pots and were submitted to 4 and 8 days of heat stress under polythene sheets 1 week after anthesis. One day before the onset of heat stress, 2% potassium (K) as K2SO4 was sprayed on all the plants. Flag leaves from both genotypes were collected after 4 and 8 days of heat stress. Leaf physiology changes were measured to quantify heat damage and to understand the K-induced recovery mechanism. The crop was harvested 125 days after sowing, and grain yield data were collected. Increasing duration of heat stress significantly impaired leaf physiology and grain yield of both studied wheat genotypes. Compared with control (under optimum temperature), 4 and 8 days heat-stressed plants produced 11 and 19% lesser grain yield per spike (averaged across genotypes and in the second years of study), respectively. Likewise, 4- and 8-days heat-stressed plants had 15 and 37% (averaged across genotypes and in the second years of study) lower flag leaf photosynthesis, respectively, compared with control plants. Across the genotypes, 8-days heat caused significantly more grain yield loss in Anaj-17 during the second year than in Ujala-16. Foliar K significantly restored leaf chlorophyll, Pn, Fv/Fm by reducing cellular membrane damage in the heat-stressed plants. This physiological recovery and activation of the plant defensive system by K under high-temperature stress protected the growth and grain development. For example, K-treated plants produced 19% higher 1,000 grain weight in 8 days of heat stress (across genotypes and in the second years of study) compared with water-treated plants under the hot environment of the respective thermal regime. Our study suggests that wheat performance under terminal heat stress can be improved through the exogenous application of K.

Nano-iron oxide accelerates growth, yield, and quality of Glycine max seed in water deficits.

Drought is one of the most destructive abiotic stresses that impact the growth, physiology, yield, and nutritional quality of seeds of crop plants. In modern agriculture, the use of nanoparticles can be beneficial due to their large surface area and higher potentiality to enter into the plant leaf during foliar application. This study aims to evaluate the effects of foliar spray containing varying doses (0, 100, and 200 ppm) of the nano-iron (Fe3O4) on the growth, physiology, yield, and seed nutritional quality of soybean under drought (40% of field capacity, FC) and well-watered (80% of FC) conditions. Leaf water status, chlorophyll content of leaves, the height of the plant, fresh leaf weight, fresh stem weight, fresh petiole weight, total dry weight, seed yield, and protein and oil content in soybean seeds were found to be suppressed by the applied drought stress. Under both drought (40% of FC) and controlled well-watered (80% of FC) conditions, the foliar application of nano-iron substantially improved the growth, physiology, yield, and quality of soybean seeds. The nanoparticles at 200 ppm increased soybean seed yield by 40.12 and 32.60% in drought and well-watered conditions, respectively, compared to the untreated plants. Furthermore, nano-iron increased the oil content of soybean seeds by 10.14 and 7.87% under drought and well-watered conditions, respectively, compared to the untreated control. Our results indicate that the application of nano-iron improved drought tolerance, yield, and seed quality of soybean, so exogenous foliar sprays of 200 ppm Fe3O4 were more effective than the other treatments in enhancing drought tolerance and can be utilized to reduce losses caused by drought stress in soybean-growing areas.

Optimization of Elicitation Conditions to Enhance the Production of Potent Metabolite Withanolide from Withania somnifera (L.).

This study aimed at optimizing conditions for increased withanolide production in Withania somnifera. The elicitors used for the foliar spray on the aerial parts of the plant were salicylic acid, jasmonic acid, and chitosan for the enhancement of withanolides in Withania somnifera under different environmental regimes. Three different elicitors, i.e., chitosan, jasmonic acid and salicylic acid, were applied on the plants through foliar route every 15th day for 6 months, and later plants were used for sample preparation. Further, the elicitors were used in different concentration, i.e., jasmonic acid (50, 200 and 400 ppm), chitosan (10, 50 and 100 ppm) and salicylic acid (0.5, 1 and 2 ppm). The elicitors were sprayed on the foliar parts of the plant between 10:00-11:00 a.m. on application days. For elicitor spray, a calibrated sprayer was used. The withanolide A/withaferin A was quantified through HPLC. It was found that in an open environment, maximum withaferin A content, i.e., 0.570 mg/g (DW), was recorded with jasmonic acid (50 ppm) treatment in comparison to control (0.067 mg/g DW). Thus, there was an 8.5-fold increase in the withaferin A content. Maximum withanolide A content of 0.352 mg/g (DW) was recorded when chitosan (50 ppm) was sprayed, while in the control, withanolide A content was recorded to be 0.031 mg/g (DW); thus, chitosan application increased the production of withanolide A by 11.3-fold. Under controlled conditions, maximum withaferin A content of 1.659 mg/g (DW) was recorded when plants were sprayed with chitosan (100 ppm), which was 8.1 times greater than the control content of 0.203 mg/g (DW). Maximum withanolide A content of 0.460 mg/g (DW) was recorded when chitosan (100 ppm) was applied, whereas in the control, withanolide A content was found to be 0.061 mg/g (DW). Thus, foliar spraying of elicitors in very low concentrations can serve as a low-cost, eco-friendly, labor-intensive and elegant alternative approach that can be practiced by farmers for the enhancement, consistent production and improved yield of withanolide A/withaferin A. This can be a suitable way to enhance plant productivity, thus increasing the availability of withanolide A and withaferin A for the health and pharma industry.