Enrichment of low-abundance osteopontin in bovine milk via reciprocating free-flow isoelectric focusing.

Osteopontin (OPN) in milk plays an important role in intestinal and brain development in early infancy, and great attention has been focused on OPN isolation to add extra OPN in infant formula. However, large-scale OPN isolation is limited by the low efficiency of sample pretreatment. Herein, we utilized preparative reciprocating free-flow isoelectric focusing (RFFIEF) to showcase the enrichment of low-abundance OPN in bovine milk, which contained an extremely high concentration of unwanted proteins. The reciprocating IEF format and the design of the multi-channel collector allowed us to enrich OPN in 1 L milk within 6 h. We removed 97.5% of unwanted proteins and obtained an enrichment factor of 11. Thus, our RFFIEF method can be applied to the preparative pretreatment of the large-scale milk sample and potentially improve the efficiency of downstream OPN purification.

Identification of structural origins of complex charge heterogeneity in therapeutic ACE2Fc fusion protein facilitated by free-flow isoelectric focusing.

Fc Fusion protein represents a versatile molecular platform with considerable potential as protein therapeutics of which the charge heterogeneity should be well characterized according to regulatory guidelines. Angiotensin-converting enzyme 2 Fc fusion protein (ACE2Fc) has been investigated as a potential neutralizing agent to various coronaviruses, including the lingering SARS-CoV-2, as this coronavirus must bind to ACE2 to allow for its entry into host cells. ACE2Fc, an investigational new drug developed by Henlius (Shanghai China), has passed the Phase I clinical trial, but its huge amount of charge isoforms and complicated charge heterogeneity posed a challenge to charge variant investigation in pharmaceutical development. We employed offline free-flow isoelectric focusing (FF-IEF) fractionation, followed by detailed characterization of enriched ACE2Fc fractions, to unveil the structural origins of charge heterogeneity in ACE2Fc expressed by recombinant CHO cells. We adopted a well-tuned 3-component separation medium for ACE2Fc fractionation, the highest allowable voltage to maximize the FF-IEF separation window and a mild Protein A elution method for preservation of protein structural integrity. Through peptide mapping and other characterizations, we revealed that the intricate profiles of ACE2Fc charge heterogeneity are mainly caused by highly sialylated multi-antenna N-glycosylation. In addition, based on fraction characterization and in silico glycoprotein model analysis, we discovered that the large acidic glycans at N36, N73, and N305 of ACE2Fc were able to decrease the binding activity towards Spike (S) protein of SARS-CoV-2. Our study exemplifies the value of FF-IEF in highly complex fusion protein characterization and revealed a quantitative sialylation-activity relationship in ACE2Fc.

Preparation of Highly Enriched ER Membranes Using Free-Flow Electrophoresis.

Free-flow electrophoresis (FFE) is a technique for separation of proteins, peptides, organelles, and cells. With zone electrophoresis (ZE-FFE), organelles are separated according to surface charge. The ER is the only remaining major cellular compartment in Arabidopsis not to have been isolated using density centrifugation, immune-isolation, or any other method previously applied to purification of plant membranes. By using continuous-flow electrophoresis, ER vesicles of similar surface charge, which may have been fragmented during cell lysis, can be focused. A large portion of these vesicles are of sufficiently different surface charge that separation from the majority of Golgi and other contaminants is possible. Here we adapt an earlier ZE-FFE Golgi isolation protocol for the isolation of highly pure ER vesicles and for tracking the migration of peripheral ER vesicles. Isolating ER vesicles of homogeneous surface charge allows multi-omic analyses to be performed on the ER. This facilitates investigations into structure-function relationships within the ER.

Fabrication of µFFE Devices in COC via Hot Embossing with a 3D-Printed Master Mold.

The fabrication of high-performance microscale devices in substrates with optimal material properties while keeping costs low and maintaining the flexibility to rapidly prototype new designs remains an ongoing challenge in the microfluidics field. To this end, we have fabricated a micro free-flow electrophoresis (µFFE) device in cyclic olefin copolymer (COC) via hot embossing using a PolyJet 3D-printed master mold. A room-temperature cyclohexane vapor bath was used to clarify the device and facilitate solvent-assisted thermal bonding to fully enclose the channels. Device profiling showed 55 µm deep channels with no detectable feature degradation due to solvent exposure. Baseline separation of fluorescein, rhodamine 110, and rhodamine 123, was achieved at 150 V. Limits of detection for these fluorophores were 2 nM, 1 nM, and 10 nM, respectively, and were comparable to previously reported values for glass and 3D-printed devices. Using PolyJet 3D printing in conjunction with hot embossing, the full design cycle, from initial design to production of fully functional COC µFFE devices, could be completed in as little as 6 days without the need for specialized clean room facilities. Replicate COC µFFE devices could be produced from an existing embossing mold in as little as two hours.

A review of the zone broadening contributions in free-flow electrophoresis.

The broadening of analyte streams, as they migrate through a free-flow electrophoresis (FFE) channel, often limits the resolving power of FFE separations. Under laminar flow conditions, such zonal spreading occurs due to analyte diffusion perpendicular to the direction of streamflow and variations in the lateral distance electrokinetically migrated by the analyte molecules. Although some of the factors that give rise to these contributions are inherent to the FFE method, others originate from non-idealities in the system, such as Joule heating, pressure-driven crossflows, and a difference between the electrical conductivities of the sample stream and background electrolyte. The injection process can further increase the stream width in FFE separations but normally influencing all analyte zones to an equal extent. Recently, several experimental and theoretical works have been reported that thoroughly investigate the various contributions to stream variance in an FFE device for better understanding, and potentially minimizing their magnitudes. In this review article, we carefully examine the findings from these studies and discuss areas in which more work is needed to advance our comprehension of the zone broadening contributions in FFE assays.

Investigating peak dispersion in free-flow counterflow gradient focusing due to electroosmotic flow.

Free-flow electrophoresis (FFE) has the ability to continuously separate charged solutes from complex biological mixtures. Recently, a free-flow counterflow gradient focusing mechanism has been introduced to FFE, and it offers the potential for improved resolution and versatility. However, further investigation is needed to understand the solute dispersion at the focal position. Therefore, the goal of this work is to model the impact of electroosmotic flow, which is found to produce a pressure-driven backflow to maintain the fixed counterflow inputs. Like the counterflow, this backflow has a parabolic velocity profile that must be considered when predicting the concentration distribution of a given solute. After the model is established, preliminary experimental results are presented for a qualitative comparison. Results demonstrate a reasonable agreement at low applied voltages and provide a strong framework for future experimental validation.

Integration of Impedimetric Sensors for In Situ Electrochemical Impedance Spectroscopy in Free-Flow Electrophoresis Applications in Lab-on-Chip Systems.

Miniaturization and integration of chemical reactions into fluidic systems in combination with product purification or buffer exchange can reduce the amount of solvents and reactants required while increasing synthesis efficiency. A critical step is the regulation of flow rates to realize optimal synthesis conditions and high purification rates, so real-time, label-free monitoring is required in methods such as free-flow electrophoresis. Optical detection methods are widely used, but they often have complex excitation and detection setups that are disadvantageous for point-of-care applications. The method we have chosen is electrochemical impedance spectroscopy for detecting charged compounds in aqueous buffers with low ionic strength. Propranolol was selected for proof of concept and was separated from the organic solvent and the precursor oxirane by free-flow electrophoresis. For this purpose, electrode structures were fabricated in microfluidic channels by photolithographic lift-off technique and optimized in terms of positioning, electrode size and distance for sensitive detection, and quantification of propranolol in the nanomolar range. It is also noteworthy that the organic solvent dimethyl sulfoxide (DMSO) could be detected and quantified by an increased impedance magnitude. Subsequently, the optimized interdigital electrode structures were integrated into the outlet channels of the electrophoretic separation chamber to monitor the various outgoing fluidic streams and provide in-line control of the fluidic flows for the purification step. In conclusion, we can provide a microfluidic chip to monitor the separation efficiency of a substance mixture during free-flow electrophoresis without the need of complex analytical techniques using electrochemical impedance spectroscopy.

Fluorescence Imaging Characterization of the Separation Process in a Monolithic Microfluidic Free-Flow Electrophoresis Device Fabricated Using Low-Temperature Co-Fired Ceramics.

A monolithic microfluidic free-flow electrophoresis device, fabricated using low-temperature co-fired ceramic technology, is presented. The device integrates gold electrodes and a 20 µm thick transparent ceramic optical window, suitable for fluorescence imaging, into a multilevel microfluidic chamber design. The microfluidic chamber consists of a 60 µm deep separation chamber and two, 50 µm deep electrode chambers separated by 10 µm deep side channel arrays. Fluorescence imaging was used for in-chip, spatial-temporal characterization of local pH variations in separation conditions as well as to characterize the separation process. The device allowed baseline resolution separation of a sample mixture of Fluorescein, Rhodamine 6G, and 4-Methylumbelliferone at pH 7.0, in only 6 s, using 378 V.s/cm. The results demonstrate the possibility of studying a chemical process using fluorescence imaging within the traditional fields of low-temperature co-fired ceramics technology, such as high-electrical-field applications, while using a simple fabrication procedure suitable for low-cost mass production.

[Multi-channel contactless conductivity detection device for online detection of free-flow electrophoresis separation].

Free-flow electrophoresis (FFE) is an all-liquid-phase electrophoresis technique without any supporting media, which has both analytical and preparative functions. Compared to other electrophoresis techniques, FFE has been used for the separation of peptides, proteins, cells, and microorganisms due to its advantages of mild separation environment, high recovery, and sustainable separation. Both the online detection of the characteristic parameters for each component solution and the real-time control of the progress of the separation experiment are of considerable importance for the study of FFE separation. Since the existing FFE devices do not have the online detection function, there are obvious deficiencies in their practicability. The absence of online detection function not only made it impossible to track the progress of the separation experiment in real time, but also made it difficult to detect the properties of the component solutions, which still require offline testing after separation. In this study, a multi-channel capacitively coupled contactless conductivity detection (MC-C4D) device has been developed to solve this problem, and an automatic measurement software has also been developed. The MC-C4D device used a parallel time-sharing contactless conductivity detection technique. It consisted of several contactless conductivity detection modules arranged in parallel, which in turn consisted of a number of contactless conductivity cells that were switched on/off by analog multiplexers for detecting the conductivity of the solution flowing through the cells in real time. The number of cells was equal to the number of components of the FFE. The components were connected to each of the FFE flow channels, such that the MC-C4D device could be used to measure the conductivity of the solution flowing through each channel in parallel online. To verify the performance of the MC-C4D device, calibration was conducted by using potassium chloride (KCl) standard solutions on MC-C4D device. The experimental data showed that the detection range of MC-C4D was 0.015-2.5 mS/cm, and the limit of detection (LOD) was 0.002 mS/cm. The intra-day relative standard deviation (RSD, n=3) was 2.31%, the measurement relative error (RE) was 3.03%, and the measurement difference between channels was 1.60%. All these data validated that the device had the advantages of wide detection range, low LOD, good repeatability, high accuracy, and low variation between channels. The MC-C 4D device was also applied to reciprocating free-flow isoelectric focusing (RFFIEF) electrophoresis for real-time online detection of the conductivity of each component solution during protein focusing. At the start of isoelectric focusing, when the ions had not reached equilibrium loading in the electric field and the pH gradient had not yet been fully developed, there was little difference in conductivity between the different channels and the channel conductivity curve was relatively flat. As the experiment progressed, the proteins gradually started to enrich the anodic end. As the proteins accumulated towards the isoelectric point, their own net charge gradually decreased, and thus, the conductivity of the solution in the channels near the anodic region also decreased. Under sufficient isoelectric focusing, protein enrichment was evident. In the focusing region, the conductivity of the solution in the corresponding channel decreased further. There was also an increase in the conductivity of the solution in the corresponding channel due to the accumulation of ions near the electrode ends. These results showed that the MC-C4D device not only enabled real-time online detection of the conductivity of each component solution in FFE, but also aided in mastering the progress of separation experiment in RFFIEF, thus improving the practicality of the FFE device. Thus, the MC-C4D device, which had the advantages of good performance, small size, simple circuit system, easy installation and commissioning, and low cost, could play an important role in multi-channel measurement, online inspection, and process monitoring.

High-Throughput Continuous-Flow Separation in a Micro Free-Flow Electrophoresis Glass Chip Based on Laser Microfabrication.

Micro free-flow electrophoresis (µFFE) provides a rapid and straightforward route for the high-performance online separation and purification of targeted liquid samples in a mild manner. However, the facile fabrication of a µFFE device with high throughput and high stability remains a challenge due to the technical barriers of electrode integration and structural design for the removal of bubbles for conventional methods. To address this, the design and fabrication of a high-throughput µFFE chip are proposed using laser-assisted chemical etching of glass followed by electrode integration and subsequent low-temperature bonding. The careful design of the height ratio of the separation chamber and electrode channels combined with a high flow rate of buffer solution allows the efficient removal of electrolysis-generated bubbles along the deep electrode channels during continuous-flow separation. The introduction of microchannel arrays further enhances the stability of on-chip high-throughput separation. As a proof-of-concept, high-performance purification of fluorescein sodium solution with a separation purity of ~97.9% at a voltage of 250 V from the mixture sample solution of fluorescein sodium and rhodamine 6G solution is demonstrated.

Microchip Free-Flow Electrophoresis for Bioanalysis, Sensing, and Purification.

The separation of complex mixtures is ubiquitous throughout molecular biology, and techniques such as gel-based electrophoresis are common laboratory practice. Such methods are not without their drawbacks, however, which include non-specific interactions between analyte and the separation matrix, poor yields in purification and non-continuous analyte throughput. Microfluidic techniques, which exploit physical phenomena unique to the microscale, promise to improve many aspects of traditional laboratory procedures. These methods offer a quantitative, solution-based alternative to traditional gel electrophoresis, with rapid measurement times enabling the analysis of transient or weak biomolecular interactions that would be challenging to observe with traditional methods. Here, we present a protocol for the lithographic fabrication and operation of microfluidic chips capable of free-flow electrophoretic (FFE) fractionation and analysis of biological analytes. We demonstrate the efficacy of our approach through a protein-sensing methodology based on FFE fractionation of DNA-protein mixtures. In addition, the FFE technique described here can be readily adapted to suit a variety of preparative and analytical applications, providing information on the charge, zeta-potential, and interactions of analytes.

Reciprocating free-flow isoelectric focusing with online array ultraviolet detector for process monitoring of protein separation.

Free-flow isoelectric focusing (FFIEF) is a useful tool for separating and purifying proteins, DNA, cells, and organelles, etc. However, the online monitoring of each fraction during an FFIEF run has not been achieved yet, resulting in a lack of process monitoring of FFIEF. Herein, an online array ultraviolet (UV) detection system was developed for the easy assay of FFE fractions. The detector was integrated with an apparatus of FFIEF with 32 fractions to show the online monitoring, and bovine serum albumin (BSA) and lysozyme were chosen as the model proteins for manifesting the UV detector performance. The experiments revealed that (i) all the fluidic cells had good linearity from 0.03 to 10 mg/mL BSA and fair limits of detection (LODs) of 0.01 mg/mL; (ii) all the cells had good uniformity of UV absorbance; and (iii) the deviations of intra-day and inter-day of UV detector were respectively 3.8% and 5.8%, indicating the fair stability of the UV detector. The UV detector could be well used for the process monitoring of two model proteins through the whole FFIEF run, and the online absorbance assay of proteins at the end of FFIEF. The UV detector herein had the evident potential for rapid and convenient assay of protein fraction in FFIEF as well as other FFE modes.

Investigating peak dispersion in free-flow counterflow gradient focusing.

Free-flow electrophoresis (FFE) enables the continuous separation and collection of charged solutes, and as a result, it has drawn interest as both a preparative and an analytical tool for biological applications. Recently, a free-flow counterflow gradient focusing (FF-CGF) mechanism has been proposed with the goal of improving the resolution and versatility of FFE. To realize this potential, the factors that influence solute dispersion deserve further attention, including the gradient strength and the parabolic profile of the counterflow. Therefore, the goal of this work is to develop a theoretical model to study the interplay between these factors and molecular diffusion. Overall, an asymmetric solute distribution emerges for a wide range of parameters, and this behavior can be characterized with an exponentially modified Gaussian function. Results show that FF-CGF can achieve high-resolution separations, with the potential for high-throughput protein purification. Moreover, this work provides a practical guide for optimizing experimental conditions, as well as a strong framework for understanding and developing FF-CGF further.

Isolation of native EVs from primary biofluids-Free-flow electrophoresis as a novel approach to purify ascites-derived EVs.

Although extracellular vesicles (EVs) have been extensively characterized, efficient purification methods, especially from primary biofluids, remain challenging. Here we introduce free-flow electrophoresis (FFE) as a novel approach for purifying EVs from primary biofluids, in particular from the peritoneal fluid (ascites) of ovarian cancer patients. FFE represents a versatile, fast, matrix-free approach for separating different analytes with inherent differences in charge density and/or isoelectric point (pI). Using a series of buffered media with different pH values allowed us to collect 96 fractions of ascites samples. To characterize the composition of the individual fractions, we used state-of-the-art methods such as nanoflow and imaging flow cytometry (nFCM and iFCM) in addition to classical approaches. Of note, tetraspanin-positive events measured using nFCM were enriched in a small number of distinct fractions. This observation was corroborated by Western blot analysis and electron microscopy, demonstrating only minor contamination with soluble proteins and lipid particles. In addition, these gently purified EVs remain functional. Thus, FFE represents a new, efficient and fast method for separating native and highly purified EVs from complicated primary samples.

Miniaturized free-flow electrophoresis: production, optimization, and application using 3D printing technology.

The increasing resolution of three-dimensional (3D) printing offers simplified access to, and development of, microfluidic devices with complex 3D structures. Therefore, this technology is increasingly used for rapid prototyping in laboratories and industry. Microfluidic free flow electrophoresis (µFFE) is a versatile tool to separate and concentrate different samples (such as DNA, proteins, and cells) to different outlets in a time range measured in mere tens of seconds and offers great potential for use in downstream processing, for example. However, the production of µFFE devices is usually rather elaborate. Many designs are based on chemical pretreatment or manual alignment for the setup. Especially for the separation chamber of a µFFE device, this is a crucial step which should be automatized. We have developed a smart 3D design of a µFFE to pave the way for a simpler production. This study presents (1) a robust and reproducible way to build up critical parts of a µFFE device based on high-resolution MultiJet 3D printing; (2) a simplified insertion of commercial polycarbonate membranes to segregate separation and electrode chambers; and (3) integrated, 3D-printed wells that enable a defined sample fractionation (chip-to-world interface). In proof of concept experiments both a mixture of fluorescence dyes and a mixture of amino acids were successfully separated in our 3D-printed µFFE device.

Rapid Structural, Kinetic, and Immunochemical Analysis of Alpha-Synuclein Oligomers in Solution.

Oligomers comprised of misfolded proteins are implicated as neurotoxins in the pathogenesis of protein misfolding conditions such as Parkinson's and Alzheimer's diseases. Structural, biophysical, and biochemical characterization of these nanoscale protein assemblies is key to understanding their pathology and the design of therapeutic interventions, yet it is challenging due to their heterogeneous, transient nature and low relative abundance in complex mixtures. Here, we demonstrate separation of heterogeneous populations of oligomeric α-synuclein, a protein central to the pathology of Parkinson's disease, in solution using microfluidic free-flow electrophoresis. We characterize nanoscale structural heterogeneity of transient oligomers on a time scale of seconds, at least 2 orders of magnitude faster than conventional techniques. Furthermore, we utilize our platform to analyze oligomer ζ-potential and probe the immunochemistry of wild-type α-synuclein oligomers. Our findings contribute to an improved characterization of α-synuclein oligomers and demonstrate the application of microchip electrophoresis for the free-solution analysis of biological nanoparticle analytes.

Purification of low-abundance lysozyme in egg white via free-flow electrophoresis with gel-filtration chromatography.

As an effective separation tool, free-flow electrophoresis has not been used for purification of low-abundance protein in complex sample matrix. Herein, lysozyme in complex egg white matrix was chosen as the model protein for demonstrating the purification of low-content peptide via an FFE coupled with gel fitration chromatography (GFC). The crude lysozyme in egg while was first separated via free-flow zone electrophoresis (FFZE). After that, the fractions with lysozyme activity were condensed via lyophilization. Thereafter, the condensed fractions were further purified via a GFC of Sephadex G50. In all of the experiments, a special poly(acrylamide- co-acrylic acid) (P(AM-co-AA)) gel electrophoresis and a mass spectrometry were used for identification of lysozyme. The conditions of FFZE were optimized as follows: 130 µL/min sample flow rate, 4.9 mL/min background buffer of 20 mM pH 5.5 Tris-Acetic acid, 350 V, and 14 °C as well as 2 mg/mL protein content of crude sample. It was found that the purified lysozyme had the purity of 80% and high activity as compared with its crude sample with only 1.4% content and undetectable activity. The recoveries in the first and second separative steps were 65% and 82%, respectively, and the total recovery was about 53.3%. The reasons of low recovery might be induced by diffusion of lysozyme out off P(AM-co-AA) gel and co-removing of high-abundance egg ovalbumin. All these results indicated FFE could be used as alternative tool for purification of target solute with low abundance.

A thiol-ene microfluidic device enabling continuous enzymatic digestion and electrophoretic separation as front-end to mass spectrometric peptide analysis.

One of the most attractive aspects of microfluidic chips is their capability of integrating several functional units into one single platform. In particular, enzymatic digestion and chemical separation are important steps in processing samples for many biochemical assays. This study presents the development and application of a free-flow electrophoresis microfluidic chip, and its upstream combination with an enzyme microreactor with immobilized pepsin in the same miniaturized platform. The whole microfluidic chip was fabricated by making use of thiol-ene click chemistry. As a proof of concept, different fluorescent dyes and labeled amino acids were continuously separated in the 2D electrophoretic channel. The protease pepsin was immobilized using a covalent linkage with ascorbic acid onto a high-surface monolithic support, also made of thiol-ene. To show the potential of the microfluidic chip for continuous sample preparation and analysis, an oligopeptide was enzymatically digested, and the resulting fragments were separated and collected in a single step (prior to mass spectrometric detection), without the need of further time-consuming liquid handling steps.

Characterization of the acidic species of a monoclonal antibody using free flow electrophoresis fractionation and mass spectrometry.

Antibody charge heterogeneity is one of the major product-related variants in recombinant biopharmaceuticals, which has been commonly monitored by imaged capillary isoelectric focusing (icIEF). Due to the challenges with sample recovery and fractionation, other charge-based analytical approaches have been explored as complementary methods allowing for further detailed charge variant characterization. This study describes the utilization of free flow electrophoresis (FFE) fractionation in combination with other analytical techniques, such as mass spectrometry for monoclonal antibody acidic variants characterization. The preparative FFE technique allowed for continuous sample separation and fluid phase fractionation of antibody charge isoforms. The monoclonal antibody starting material was fractionated by FFE, followed by purification and characterization. icIEF analysis demonstrated the purity of the fractions and comparability of the charge profiles between these two techniques. The intact molecular mass analysis revealed that glycation modification was highly enriched in the acidic fractions. SEC UV/Fluorescence method was developed to assess the levels of aggregation and fluorescent advanced glycation end-products (AGEs). Detailed peptide map was performed and revealed that acidic fractions were enriched in AGEs, methionine, tryptophan, histidine oxidation, asparagine deamidation, lysine glycation, carboxymethyl lysine, glycine to aspartic acid substitution compared to the main peak and starting material. The results indicate that acidic variants can account for a variety of low-level modifications present as very heterogeneous forms.

Continuous flow electrophoretic separation - Recent developments and applications to biological sample analysis.

Continuous flow electrophoretic separation with continuous sample loading provides the advantage of processing volumes of any sizes, as well as the benefit of a real-time monitoring and optimization of the separation process. In addition, the spatial separation of the sample enables collecting multiple separated components simultaneously and in a continuous manner. The separation is usually performed in mild buffers without organic solvents and detergents (sample biological activity is retained) and it is carried out without usage of a solid support in the separation space preventing the interaction of the sample with it (high sample recovery). The method is used for the separation of proteins/peptides in proteomic applications, and its great applicability is to the separation of the cells, cellular organelles, vesicles, membrane fragments, and DNA. This review focuses on the electrophoretic separation performed in a continuous flow and it describes various electrophoretic modes and instrumental setups. Recent developments in methodology and instrumentation, the integration with other techniques, and the application to the biological sample analysis are discussed as well.