Multicomponent Gas Sensing Fiber Probe System Based on Platinum Coated Capillary Enhanced Raman Spectroscopy.

This paper proposes a novel multicomponent gas-sensing optical fiber probe system. It utilizes a precisely engineered Platinum-coated capillary fabricated via Atomic Layer Deposition (ALD) technology as the core for enhanced Raman spectroscopy, marking the first application of ALD in creating such a structure for gas Raman sensing. The noble metal capillary gas Raman probe demonstrates a low detection limit of 55 ppm for CO2 with a 30 s exposure time and good repeatability in multicomponent gas sensing. The capillary exhibits excellent stability, environmental resistance, and a large core diameter, enabling a rapid gas exchange rate and making it suitable for practical applications.

Flexible Wearable Chemoresistive Ethylene Gas-Monitoring Device Utilizing Pd/Ti3C2Tx Nanocomposites for In Situ Nondestructive Monitoring of Kiwifruit Ripeness.

Kiwifruit, renowned for its antioxidant properties and nutritional richness, faces challenges in maintaining quality during transportation, often leading to suboptimal products reaching the market. To address this issue, a wireless transmission flexible ethylene monitoring device (WFEMD) was developed. This device comprises a flexible ethylene gas sensor and a signal transmission processing unit integrated with electronic components, enabling real-time monitoring capabilities. In this study, the catalytic activity of Pd and Pd/Ti heterojunctions was leveraged to enhance the ethylene gas sensing. The impact of Ti3C2Tx modified with varying masses of Pd nanoparticles on ethylene gas response levels was investigated. The signal transmission processing unit, fabricated by using the laser direct-writing method, was optimized to collect signals from the flexible ethylene gas sensor, convert them into corresponding ethylene concentrations, and transmit data via an antenna. By introducing a random forest (RF) classification algorithm, a remarkable 97.5% accuracy in predicting kiwifruit ripeness grades was achieved. The algorithm facilitated precise classification by collecting key parameters such as ethylene and CO2 during transportation. The WFEMD enables real-time acquisition of kiwifruit ethylene gas information, which is transmitted wirelessly for data visualization and traceability via mobile terminals. This empowers managers with timely insights into ethylene emissions and ripeness predictions, facilitating informed decision-making processes.

Single ZnO Nanowire for Electrical and Optical NO2 Gas Sensing: Origin of Reversible and Irreversible Gas Effects Investigated by Photoluminescence Spectroscopy.

In this work, the gas sensing properties of a single ZnO nanowire (NW) are investigated, simultaneously in terms of photoluminescence (PL) and photocurrent (PC) response to NO2 gas, with the purpose of giving new insights on the gas sensing mechanism of a single 1D ZnO nanostructure. A single ZnO NW sensing device was fabricated, characterized, and compared with a sample made of bundles of ZnO NWs. UV near-band-edge PL emission spectroscopy was carried out at room temperature and by lowering the temperature down to 77 K, which allows detection of resolved PL peaks related to different excitonic transition regions. Surface effects were observed in PL maps, considering different nano and microstructures. Electrical and optical measurements were acquired at the same time during the NO2 gas exposure, allowing for the comparison of PL and PC response times and signal recovery. During NO2 gas desorption, irreversible behavior in the surface-related and donor-acceptor pair (DAP) regions is interpreted as the effect of an initial transient when electronic transfer from the gas molecules to the bulk occurs through the ZnO NW surface which acts as a channel. To the best of our knowledge, this is the first work which investigates the simultaneous PL optical and PC electrical response signals of a single ZnO NW to gas exposure.

Laser-Induced Periodic Surface Structures and Their Application for Gas Sensing.

Semiconducting metal oxides are widely used for solar cells, photo-catalysis, bio-active materials and gas sensors. Besides the material properties of the semiconductor being used, the specific surface topology of the sensors determines device performance. This study presents different approaches for increasing the sensing area of semiconducting metal oxide gas sensors. Micro- and nanopatterned laser-induced periodic surface structures (LIPSSs) are generated on silicon, Si/SiO2 and glass substrates. The surface morphologies of the fabricated samples are examined by FE SEM. We selected the nanostructuring and characterization of nanostructured source Ni/Au and Ti/Au films prepared on glass using laser ablation as the most suitable of the investigated approaches. Surface structures produced on glass by backside ablation provide 100 nm features with a high surface area; they are also transparent and have high resistivity. The value of the hydrogen sensitivity in the range concentrations from 100 to 500 ppm was recorded using transmittance measurements to be twice as great for the nanostructured target TiO2/Au as compared to the NiO/Au. It was found that such transparent materials present additional possibilities for producing optical gas sensors.

Plasmonic Particle Integration into Near-Infrared Photodetectors and Photoactivated Gas Sensors: Toward Sustainable Next-Generation Ubiquitous Sensing.

Current challenges in environmental science, medicine, food chemistry as well as the emerging use of artificial intelligence for solving problems in these fields require distributed, local sensing. Such ubiquitous sensing requires components with 1) high sensitivity, 2) power efficiency, 3) miniaturizability, and 4) the ability to directly interface with electronic circuitry, i.e., electronic readout of sensing signals. Over the recent years, several nanoparticle-based approaches have found their way into this field and have demonstrated high performance. However, challenges remain, such as the toxicity of many of today's narrow bandgap semiconductors for NIR detection and the high energy consumption as well as low selectivity of state-of-the-art commercialized gas sensors. With their unique light-matter interaction and ink-based fabrication schemes, plasmonic nanostructures provide potential technological solutions to these challenges, leading also to better environmental performance. In this perspective recent approaches of using plasmonic nanoparticles are discussed for the fabrication of NIR photodetectors and light-activated, energy-efficient gas sensing devices. In addition, new strategies implying computational approaches are pointed out for miniaturizable spectrometers, exploiting the wide spectral tunability of plasmonic nanocomposites, and for selective gas sensors, utilizing dynamic light activation. The benefits of colloidal approaches for device fabrication are discussed with regard to technological advantages and environmental aspects, which are barely considered so far.

Construction of Solution Processable NUS-8/PANI Nanosheets via Template-Directed Polymerization for Ultratrace Gas Sensing.

The advancement of wireless gas sensing signifies a substantial leap forward in gas detection and intelligent monitoring technologies. This necessitates stringent design criteria for gas sensitive materials with good solution processability, conductivity, and porosity, whose design and synthesis remain challenging yet highly sought-after. Herein, the fabrication of NUS-8/polyaniline (PANI) nanosheets is presented with excellent solution processability, high porosity, triboelectric property, and superior electrical conductivity via a template-directed polymerization strategy. Solution processable NUS-8 nanosheets, synthesized directly by a "one-pot" approach, serve as templates to enhance the "on-site" polymerization of aniline, resulting in the formation of PANI layer on NUS-8 nanosheets with a thickness of 7 nm. The resultant NUS-8/PANI nanosheets exhibit outstanding solution processability, and a film conductivity of 8.6 S m-1. The solution processability enables the facile fabrication of homogeneous and compact NUS-8/PANI films and thus their integration onto electronic devices targeted for multifunctional sensing. The NUS-8/PANI coated sensors demonstrate sensitive and selective detection at room temperature toward ultratrace ammonia with a detection limit of 120 ppb. A wireless sensing system based on the NUS-8/PANI-coated sensor is capable to monitor the spoilage process of meat. This study paves novel avenues for designing and synthesizing gas-sensitive materials for practical applications.

Solution-Processable MOF-on-MOF System Constructed via Template-Assisted Growth for Ultratrace H2S Detection.

Conductive metal-organic frameworks (c-MOFs) hold promise for highly sensitive sensing systems due to their conductivity and porosity. However, the fabrication of c-MOF thin films with controllable morphology, thickness, and preferential orientation remains a formidable yet ubiquitous challenge. Herein, we propose an innovative template-assisted strategy for constructing MOF-on-MOF (Ni3(HITP)2/NUS-8 (HITP: 2,3,6,7,10,11-hexamino-tri(p-phenylene))) systems with good electrical conductivity, porosity, and solution processability. Leveraging the 2D nature and solution processability of NUS-8, we achieve the controllable self-assembly of Ni3(HITP)2 on NUS-8 nanosheets, producing solution-processable Ni3(HITP)2/NUS-8 nanosheets with a film conductivity of 1.55 × 10-3 S·cm-1 at room temperature. Notably, the excellent solution processability facilitates the fabrication of large-area thin films and printing of intricate patterns with good uniformity, and the Ni3(HITP)2/NUS-8-based system can monitor finger bending. Gas sensors based on Ni3(HITP)2/NUS-8 exhibit high sensitivity (LOD ~ 6 ppb) and selectivity towards ultratrace H2S at room temperature, attributed to the coupling between Ni3(HITP)2 and NUS-8 and the redox reaction with H2S. This approach not only unlocks the potential of stacking different MOF layers in a sequence to generate functionalities that cannot be achieved by a single MOF, but also provides novel avenues for the scalable integration of MOFs in miniaturized devices with salient sensing performance.

Simultaneous measurement of methane, propane and isobutane using a compact mid-infrared photoacoustic spectrophone.

Hydrocarbon gas sensing is a challenging task using laser absorption spectroscopy due to the complex and broad structure of absorption lines. This application requires quick, accurate and highly sensitive detection of hydrocarbon gases concentrations. In this paper, a compact photoacoustic spectrophone was developed to simultaneously measure methane, propane and isobutane. This spectrophone uses wavelength modulation spectroscopy (WMS) with a single acoustic resonator and a single DFB laser emitting at 3368 nm, which greatly reduces the system complexity without using time-division multiplexing technology for multi-gas sensing. Due to the complex and broadband absorption of hydrocarbon gases, a novel signal processing method based on multilinear regression with Ridge regression (MLR-RG) is proposed to reduce the measurement error caused by the nonlinearity of spectra signal. For single gas measurement, the detection limits of methane, propane, and isobutane are determined to be 828 ppb, 419 ppb, and 619 ppb (SNR = 1, integration time = 20 s), respectively. For simultaneous multi-gas sensing in a gaseous mixture, the detection limits of propane and isobutane are determined to be 7 ppb, 68 ppb with an integration time of 860 s, 460 s, respectively. The measurement accuracy of propane and isobutane using MLR-RG is higher than that of ordinary least squares regression and partial least squares regression by 75% and 60%, respectively. The proposed algorithm based on MLR-RG provides a promising approach to process the broad overlapping absorption spectra for accurately retrieving hydrocarbon gases concentrations.

Recent Advances in Structure Design and Application of Metal Halide Perovskite-Based Gas Sensor.

Metal halide perovskites (MHPs) are emerging gas-sensing materials and have attracted considerable attention in gas sensors due to their unique bandgap structure and tunable optoelectronic properties. The past decade has witnessed significant developments in the gas-sensing field; however, their intrinsic structural instability and ambiguous gas-sensing mechanisms hamper their practical applications. Herein, we summarize the recent advances in MHP-based gas sensors. The physicochemical properties of MHPs are discussed at first. The structure design, including dimension design and engineering design, is overviewed as well as their fabrication methods, and we put forward our insights into the gas-sensing mechanism of MHPs. It is believed that enhanced understanding of gas-sensing mechanisms of MHPs are helpful for their application as gas-sensing materials, and structure design can enhance their stability, sensing sensitivity, and selectivity to target gases as gas sensors. Subsequently, the latest developments in MHP-based gas sensors are summarized according to their different application scenarios. Finally, we conclude with the current status and challenges in this field and propose future perspectives.

Ultra-Low-Power, Extremely Stable, Highly Linear-Response Thermal Conductivity Sensor Based on a Suspended Device with Single Bare Pt Nanowire.

The continuous and stable monitoring by sensors is crucial for ensuring the safe utilization of hydrogen due to its inherent high explosiveness. Currently, catalyst aging and oxygen dependence often limit the lifetime of most sensors, which stems from the sensing materials and catalytic reaction in comparison to thermal conductivity sensors. Thermal conductivity sensors possess superior sensing characteristics such as lowpower consumption and exceptional stability attributed to their free-catalysts or free-oxygen nature. Herein, we present an ultralow-power hydrogen-thermal conductivity sensor based on suspended bare platinum nanowires. This sensor incorporates two suspended independent working elements (serpentine/bridge), each of which is thermally decoupled from the substrate. Also, the bridge element operates at significantly lower power levels (the lowest ∼3.32 µW) compared to existing direct-current hydrogen-thermal conductivity sensors. Furthermore, it demonstrates a 99.99% linearity between hydrogen concentration and response under various operating powers. Finally, our sensor shows remarkable stability through a repeatability test (>30,000 cycles). This developed platform provides an optimal structure scheme for integrated sensors with ultralow-power, extremely stable, highly linear-response sensing characteristics, which is expected to be widely used for hydrogen detection and leakage warning under various pipeline distribution systems.

Gas-Sensing Performance of Metal Oxide Heterojunction Materials for SF6 Decomposition Gases: A DFT Study.

The online monitoring of GIS equipment can be realized through detecting SF6 decomposition gasses. Metal oxide heterojunctions are widely used as gas-sensing materials. In this study, the structural and electrical properties of In2O3-ZnO and TiO2-ZnO heterojunctions were analyzed based on density functional theory calculations. After heterojunction structural optimization, the electrical conductivity of these two heterojunctions was enhanced compared to each intrinsic model, and the electrical conductivity is ranked as follows: In2O3-ZnO heterojunction > TiO2-ZnO heterojunction. The gas-sensing response of these two heterojunctions to four SF6 decomposition gasses, H2S, SO2, SOF2, and SO2F2, was investigated. For gas adsorption systems, the adsorption energy, charge transfer, density of states, charge difference density, and frontier molecular orbitals were calculated to analyze the adsorption and gas-sensing performance. For gas adsorption on the In2O3-ZnO heterojunction surface, the induced conductivity changes are in the following order: H2S > SO2F2 > SOF2 > SO2. For gas adsorption on the TiO2-ZnO heterojunction surface, H2S and SOF2 increase conductivity, and SO2 and SO2F2 decrease conductivity.

Two-Dimensional M-Chalcogene Family with Tunable Superconducting, Topological, and Magnetic Properties.

An interesting question is whether chalcogen atoms can emulate the role of carbon or boron elements stabilized between two transition metal layers, as observed in MXenes or MBenes. Here, we predict a new family of two-dimensional ternary compounds M4XY2 (where M = Pd, Y, Zr, etc.; X = S, Se, Te; and Y = Cl, Br, I), named M-chalcogene. Through first-principles calculations, we reveal diverse physical properties in these compounds, including superconducting, topological, and magnetic characteristics, where the bilayer transition metals play crucial roles. Moreover, the expected helical edge states and superconducting transition temperatures in Pd4SCl2 can be finely tuned by strains. Additionally, the Ti4SCl2 is predicted to be a topological insulator and shows promise as a gas sensor candidate for certain exotic gases. Our findings expand two-dimensional material families and provide promising platforms for diverse physical phenomena with efficient tunability by external stimuli for various applications.

In Situ Synthesis of Hierarchical Co(CO3)0.5(OH)·0.11H2O@ZIF-67/WO3 With High Humidity Immunity and Response to H2S Sensing.

H2S gas sensors with facile preparation, low detection limits, and high selectivity are crucial for environmental and human health monitoring. However, it is difficult to maintain a high response of H2S gas sensors under high humidity in practical applications. To face this dilemma, a layer-by-layer growth method is applied to in situ prepare a nanostructured Co(CO3)0.5(OH)·0.11H2O/WO3 coated by a hydrophobic hierarchical ZIF-67 as the H2S sensor. This novel composite exhibits excellent humidity immunity without sacrificing the excellent sensitivity and selectivity of H2S. At a low operating temperature of 90 °C, a remarkable response value of 1052.3 to 100 ppm H2S has been achieved, which is 779 and 9.36 times higher than that of pure WO3 and Co(CO3)0.5(OH)·0.11H2O/WO3, respectively. More importantly, an 82.2% relative response value remains at a high humidity of 75%RH. The sensing mechanisms are investigated using gas chromatography-mass spectrometry (GC-MS), which revealed that the reaction products are H2O and SO2. The high humidity immunity and fast response of the Co(CO3)0.5(OH)·0.11H2O@ZIF-67/WO3 demonstrate the layer-by-layer in situ synthesis method holds the potential application for the development of high-performance WO3-based H2S sensors.

Application of MXene composites for target gas detection in food safety.

Food contamination has long plagued agriculture, posing significant health risks to consumers. The use of volatile gases for food safety detection has proven highly effective, with composite gas sensors that leverage the two-dimensional material MXene exhibiting notable advancements in detecting various target gases. This paper reviews the progress of MXene-based composite gas sensors in the detection of food safety-related gases. The review begins by examining MXene material synthesis methods and then presents an overview of techniques aimed at enhancing MXene-based sensor detection capabilities. Recently, advancements in MXene composite gas sensors tailored for food safety gases have been highlighted. Finally, challenges encountered in gas-sensing applications of MXene-based composites are outlined, alongside predictions for their future development, aiming to offer insights for the application and advancement of intelligent gas sensors for target gases in food safety.

Gas-sensing riboceptors.

Understanding how cells sense gases or gaseous solutes is a fundamental question in biology and is pivotal for the evolution of molecular and organismal life. In numerous organisms, gases can diffuse into cells, be transported, generated, and sensed. Controlling gases in the cellular environment is essential to prevent cellular and molecular damage due to interactions with gas-dependent free radicals. Consequently, the mechanisms governing acute gas sensing are evolutionarily conserved and have been experimentally elucidated in various organisms. However, the scientific literature on direct gas sensing is largely based on hemoprotein-based gasoreceptors (or sensors). As RNA-based G-quadruplex (G4) structures can also bind to heme, I propose that some ribozymes can act as gas-sensing riboceptors (ribonucleic acid receptors). Additionally, I present a few other ideas for non-heme metal ion- or metal cluster-based gas-sensing riboceptors. Studying riboceptors can help understand the evolutionary origins of cellular and gasocrine signaling.

Construction of Fully Integrated and Energy Self-Sufficient NO2 Gas Sensors Utilizing Zinc-Air Batteries.

Exploration of novel self-powered gas sensors free of external energy supply restrictions, such as light illumination and mechanical vibration, for flexible and wearable applications is in urgent need. Herein, this work constructs a flexible and self-powered NO2 gas sensor based on zinc-air batteries (ZABs) with the cathode of the ZABs also acting as the gas-sensitive layer. Furthermore, the SiO2 coating film, serving as a hydrophobic layer, increases the three-phase interfaces for the NO2 reduction reaction. The constructed sensors exhibit a high sensing response (0.3 V @ 5 ppm), an ultralow detection limit (61 ppb), a fast sensing process (129 and 103 s), and excellent selectivity. Moreover, the sensors also possess a wide working temperature range and a low working temperature tolerance (0.34 V at -15 °C). Simulations indicate that the hydrophobic surface at the cathode-hydrogel interface will accommodate more NO2 gas molecules at the reaction sites and prevent the influence of inner water evaporation and direct dissolution of NO2 in the electrolyte, which is beneficial to the enhanced gas sensing abilities. Finally, the self-powered sensing device is incorporated into a smart sensing system for practical applications. This work will pave a new insight into the construction of integrated and energy self-sufficient smart gas sensing systems.

Metal-Organic Framework-Derived Au-Doped In2O3 Nanotubes for Monitoring CO at the ppb Level.

Achieving selective detection of ppb-level CO is important for air quality testing at industrial sites to ensure personal safety. Noble metal doping enhances charge transfer, which in turn reduces the detection limit of metal oxide gas sensors. In this work, metal-organic framework-derived Au-doped In2O3 nanotubes with high electrical conductivity are synthesized by pyrolysis of the Au-doped metal-organic framework (In-MIL-68) as a template. Gas-sensing experiments reveal that the detection limit of 0.2% Au-doped In2O3 nanotubes (0.2% Au, mass fraction) is as low as 750 ppb. Meanwhile, the sensing material shows a response value of 18.2 to 50 ppm of CO at 240 °C, which is about 2.8 times higher than that of pure In2O3. Meanwhile, the response and recovery times are short (37 s/86 s). The gas-sensing mechanism of CO is uncovered by in situ DRIFTS through the reaction intermediates. In addition, first-principles calculations suggest that Au doping of In2O3 significantly enhances its adsorption energy for CO and improves the electron transfer properties. This study reveals a novel synthesis pathway for Au-doped In2O3 nanotubular structures and their potential application in low concentration CO detection.

Size-Dependent Thresholds in CuO Nanowires: Investigation of Growth from Microstructured Thin Films for Gas Sensing.

An experimental characterization of cupric oxide nanowire (CuO NW) growth from thermally oxidized, microstructured Cu thin films is performed. We have systematically studied the influence of the thickness and dimension of Cu layers on the synthesis of CuO NW. The objective was to determine the optimum Cu geometries for increased CuO NWs growth to bridge the gap between adjacent Cu structures directly on the chip for gas sensing applications. Thresholds for CuO-NW growth regarding film thickness and lateral dimensions are identified based on SEM images. For a film thickness of 560 nm, NWs with lengths > 500 nm start to grow from the edges of Cu structures with an area ≥ 4 µm2. NWs growing from the upper surface were observed for an area ≥ 16 µm2. NW growth between adjacent thermally oxidized thin films was analyzed. The study provides information on the most relevant parameters of CuO NWs growth, which is mandatory for integrating CuO NWs as gas sensor components directly on microchips. Based on this result, the gap size of the structure was varied to find the optimum value of 3 µm.

Recent advances in measuring the effects of diet on gastrointestinal physiology: Sniffing luminal gases and fecal volatile organic compounds.

Despite the huge pool of ideas on how diet can be manipulated to ameliorate or prevent illnesses, our understanding of how specific changes in diet influence the gastrointestinal tract is limited. This review aims to describe two innovative investigative techniques that are helping lift the veil of mystery about the workings of the gut. First, the gas-sensing capsule is a telemetric swallowable device that provides unique information on gastric physiology, small intestinal microbial activity, and fermentative patterns in the colon. Its ability to accurately measure regional and whole-gut transit times in ambulant humans has been confirmed. Luminal concentrations of hydrogen and carbon dioxide are measured by sampling through the gastrointestinal tract, and such application has enabled mapping of the relative amounts of fermentation of carbohydrates in proximal-versus-distal colon after manipulation of the types and amounts of dietary fiber. Second, changes in the smell of feces, via analysis of volatile organic compounds, occur in response to the diet, and by the presence and therapy of irritable bowel syndrome and inflammatory bowel disease. Such information is likely to aid our understanding of what dietary change can do to the colonic luminal microenvironment, and may value-add to diagnosis and therapeutic design. In conclusion, such methodologies enable a more complete physiological profile of the gastrointestinal tract to be created. Systematic description in various cohorts and effects of dietary interventions, particularly when co-ordinated with the analysis of microbiome, are needed.

Sabatier phenomenon in chemoselective gas-sensing reactions induced by Ag cluster coordination.

The Sabatier principle in heterogeneous catalysis provides guidance for designing optimal catalysts with the highest activity. We report a new Sabatier phenomenon induced by nanoclusters on different atomic scales in gas-sensitive reactions. We prepared a series of Ag nanocluster catalysts with coordination structures ranging from Ag0 to Ag13 through a surface coordination strategy. When used as catalysts for gas-sensitive reactions, a volcano-type relationship between the coordination number of Ag nanoclusters and gas-sensitive activity emerges, with a summit at a moderate coordination of Ag5. Mechanistic studies show that the efficient adsorption of activated *C2H6O on electron-rich Ag5 clusters is a key factor for the Sabatier phenomenon (adsorption energy from -0.322 eV to -0.663 eV), which leads to highly selective sensing. We found that the catalyst electron-rich surface layer induced by Ag5 clusters serves as a descriptor to explain the structure-activity relationship. Furthermore, due to the well-defined geometric and electronic structures in the Ag5 clusters, the optimized catalyst achieves both maximum activity and selectivity in chemoselective sensing reactions. This study reveals the Sabatier principle and provides insightful guidance for the rational design of more efficient and practical nanocluster catalysts for heterogeneous catalysis.