RESUMO
The precise regulation of chiral drug transmembrane transport can be achieved through drug transporters in living organisms. However, implementing this process in vitro is still a formidable challenge due to the complexity of the biological systems that control drug enantiomeric transport. Herein, a facile and feasible strategy is employed to construct chiral L-tyrosine-modified nanochannels (L-Tyr nanochannels) based on polyethylene terephthalate film, which could enhance the chiral recognition of propranolol isomers (R-/S-PPL) for transmembrane transport. Moreover, conventional fluorescence spectroscopy, patch-clamp technology, laser scanning confocal microscopy, and picoammeter technology are employed to evaluate the performance of nanochannels. The results show that the L-Tyr nanochannel have better chiral selectivity for R-/S-PPL compared with the L-tryptophan (L-Trp) channel, and the chiral selectivity coefficient is improved by about 4.21-fold. Finally, a detailed theoretical analysis of the chirality selectivity mechanism is carried out. The findings would not only enrich the basic theory research related to chiral drug transmembrane transport, but also provide a new idea for constructing artificial channels to separate chiral drugs.
Assuntos
Triptofano , Transporte Biológico , EstereoisomerismoRESUMO
HgTe nanocrystals (NCs) enable broadly tunable infrared absorption, now commonly used to design light sensors. This material tends to grow under multipodic shapes and does not present well-defined size distributions. Such point generates traps and reduces the particle packing, leading to a reduced mobility. It is thus highly desirable to comprehensively explore the effect of the shape on their performance. Here, we show, using a combination of electron tomography and tight binding simulations, that the charge dissociation is strong within HgTe NCs, but poorly shape dependent. Then, we design a dual-gate field-effect-transistor made of tripod HgTe NCs and use it to generate a planar p-n junction, offering more tunability than its vertical geometry counterpart. Interestingly, the performance of the tripods is higher than sphere ones, and this can be correlated with a stronger Te excess in the case of sphere shapes which is responsible for a higher hole trap density.
RESUMO
Electrochemical methods offer the simple characterization of the synthesis of molecularly imprinted polymers (MIPs) and the readouts of target binding. The binding of electroinactive analytes can be detected indirectly by their modulating effect on the diffusional permeability of a redox marker through thin MIP films. However, this process generates an overall signal, which may include nonspecific interactions with the nonimprinted surface and adsorption at the electrode surface in addition to (specific) binding to the cavities. Redox-active low-molecular-weight targets and metalloproteins enable a more specific direct quantification of their binding to MIPs by measuring the faradaic current. The in situ characterization of enzymes, MIP-based mimics of redox enzymes or enzyme-labeled targets, is based on the indication of an electroactive product. This approach allows the determination of both the activity of the bio(mimetic) catalyst and of the substrate concentration.
RESUMO
The transport length ltr and the mean free path le are determined for bulk and surface states in a Bi2Se3 nanoribbon by quantum transport and transconductance measurements. We show that the anisotropic scattering of spin-helical Dirac fermions results in a strong enhancement of ltr (≈ 200 nm) and of the related mobility µtr (≈ 4000 cm2 V-1 s-1), which confirms theoretical predictions.1 Despite strong disorder, the long-range nature of the scattering potential gives a large ratio ltr/le ≈ 8, likely limited by bulk/surface coupling. This suggests that the spin-flip length lsf ≈ ltr could reach the micron size in materials with a reduced bulk doping and paves the way for building functionalized spintronic and ballistic electronic devices out of disordered 3D topological insulators.
RESUMO
A novel label-free electrochemical immunoassay was developed for prostate-specific antigen (PSA) detection via using ß-cyclodextrin (ß-CD) assembled layer created gates for the electron transfer of probe. To construct the sensor, a gold electrode was self-assembled with monoclonal anti-PSA antibody labeled 6-mercapto-ß-cyclodextrin. Interspaces among ß-CD molecules in the layer were automatically formed on gold electrode, which act as the channel of the electron transfer of [Fe(CN)6](3-/4-) probe. When PSA bind with anti-PSA, it can block these channels on the electrode surface due to their steric hindrance effect, resulting in the decrease in redox current of the probe. Through such a gate-controlled effect, ultra trace amount of PSA may make the currents change greatly after the immunoreaction, which enhanced the signal-to-noise ratio to achieve the amplification effect. By evaluating the logarithm of PSA concentrations, the immunosensor had a good linear response to the current changes with a detection limit of 0.3 pg/mL (S/N = 3) when PSA concentration ranged from 1.0 pg/mL to 1.0 ng/mL. The label-free immunosensor exhibited satisfactory performances in sensitivity, repeatability as well as specificity.
Assuntos
Técnicas Eletroquímicas/métodos , Eletrodos , Imunoensaio/métodos , beta-Ciclodextrinas/química , Limite de Detecção , Microscopia Eletrônica de Varredura , Antígeno Prostático Específico/análise , Reprodutibilidade dos TestesRESUMO
A molecularly imprinted polymer decorated glassy carbon electrode (MIP/GCE) is facilely developed into an electrochemical sensing platform for detection of metronidazole (MNZ). MIP preparation was carried out via in situ electropolymerization and o-phenylenediamine was selected as the optimal functional monomer. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were employed to characterize and assess the performance of the so-obtained sensor. In particular, two assay methods, which are based on different principles, were involved in the detection procedure. One is based on MIP/catalysis (Method Ð) and the other is MIP/gate effect (Method II). Comparison of these two methods was made in the aspects including detection range, sensitivity, accuracy, selectivity, repeatability, and long-term stability. It is found that Method Ð affords a lower detection limit of 3.33 × 10(-10) M (S/N = 3) while the detection limit of Method II is 6.67 × 10(-10) M (S/N = 3). The linear range of Method Ð and II is 1.0 × 10(-9) to 1.0 × 10(-8) M and 2.0 × 10(-9) to 1.0 × 10(-7) M, respectively. The MIP/GCE exhibits good recognition ability towards the template molecule-MNZ in the presence of the analogues of MNZ and other interferents, which can be ascribed to the successful imprinting effect during MIP membrane preparation. Graphical Abstract Procedure for fabricating MIP/GCE and its application in detecting metronidazole in serum.
Assuntos
Antibacterianos/sangue , Espectroscopia Dielétrica/métodos , Técnicas Eletroquímicas/métodos , Metronidazol/sangue , Polímeros/síntese química , Animais , Técnicas Eletroquímicas/instrumentação , Camundongos , Impressão Molecular , Polímeros/químicaRESUMO
In this work, the anodic current at an electrode grafted with a molecularly imprinted polymer (MIP) crosslinked via a combination of hydrophobic ethyleneglycol dimethacrylate (EDMA) and hydrophilic methylene bisacrylamide (MBAA) was found to exhibit enantioselective sensitivity to the phenylalanine template in aqueous solution. An MIP-grafted electrode crosslinked with a 2:1 mixture of EDMA and MBAA was observed to respond to the template with the highest enantioselectivity, such that the change in current induced by the imprinted template was more than four times that induced by the enantiomer of the template. The contact angle of a water droplet on an MIP-coated electrode prepared using the optimal crosslinker blending ratio was also sensitive to the template and again exhibited chiral selectivity. The change in the contact angle induced by the template was more than twice as large as that obtained from the template's enantiomer. Atomic force microscopy showed that the surface of the MIP layer fabricated using a mixture of crosslinkers was rougher than that made with a single crosslinking agent, although there was no apparent correlation between the roughness and the enantioselectivity of the layer. These results indicate that the appropriate combination of crosslinkers enables the chiral-selective gate effect by modulating the flexibility and hydrophilicity of the MIP layer. The approach described herein therefore represents a new means of improving the selectivity of MIPs by blending crosslinkers having different chemical properties.
RESUMO
With H2 O or NH3 stimuli, the blue cobalt-based metal-organic framework (MOF) BP can reversibly transform to red RP. The removal/recovery of terephthalate ligands accompanied by the transformation leads to a gate effect, which allows the encapsulation and release of small solvent molecules under certain conditions. This is the first example of topology transformation from a self-penetrating to interpenetrating net in 3D MOFs.