Effect of plasticizers on the rheological properties of xanthan gum - starch biodegradable films.

The effect of plasticizers, namely glycerol, sorbitol, and citric acid, on the structural and mechanical properties of biodegradable films obtained from xanthan gum (XG) and starch was studied. The plasticizing effect of glycerol, sorbitol, and citric acid on XG-starch films is justified by the destruction of intermolecular contacts between starch and XG macromolecules and the redistribution of hydrogen bonds in the system as a result of the hydrotropic action of plasticizer molecules. The use of glycerol proved to be the most effective for regulating the deformation of films, while the use of sorbitol to preserve strength. The dependence of the film roughness on the type and concentration of plasticizers was characterized. The smallest values of protrusions on the surface of XG-starch films were found in the presence of sorbitol. Considering the effect of the concentration of plasticizers on the stickiness of the surface of XG-starch films and their structural and mechanical properties, 1.5 % concentration of glycerol, sorbitol and citric acid was determined as optimal.

Streamlined integrated protein isoelectric focusing using microfluidic paper-based device.

An innovative integrated paper-based microdevice was developed for protein separation by isoelectric focusing (IEF), allowing for robust design thanks to a 3D-printed holder integrating separation channel, reservoirs, and electrodes. To reach robustness and precision, the optimization focused on the holder geometry, the paper nature, the reservoir design, the IEF medium, and various focusing parameters. A well-established and stable pH gradient was obtained on a glass-fiber paper substrate with simple sponge reservoirs, and the integration of the electrodes in the holder led to a straightforward system. The separation medium composed of water/glycerol (85/15, v/v) allowed for reducing medium evaporation while being an efficient medium for most hydrophobic and hydrophilic proteins, compatible with mass spectrometry detection for further proteomics developments. To our knowledge, this is the first report of the use of glycerol solutions as a separation medium in a paper-based microdevice. Analytical performances regarding pH gradient generation, pI determination, separation efficiency, and resolution were estimated while varying the IEF experimental parameters. The overall process led to an efficient separation within 25 min. Then, this methodology was applied to a sample composed of saliva doped with proteins. A minimal matrix effect was evidenced, underscoring the practical viability of our platform. This low-cost, versatile and robust paper-based IEF microdevice opens the way to various applications, ranging from sample pre-treatment to integration in an overall proteomic-on-a-chip device.

Selective oxidation of glycerol mediated by surface plasmon of gold nanoparticles deposited on titanium dioxide nanowires.

This paper describes an alternative method for the in situ synthesis of gold nanoparticles (AuNPs) with a particle size of less than 3 nm, using nanoreactors formed by reverse micelles of 1,4-bis-(2-ethylhexyl) sulfosuccinate sodium (AOT) and nanoparticle stabilization with l-cysteine, which favor the preparation of nanoparticles with size and shape control, which are homogeneously dispersed (1% by weight) on the support of titanium dioxide nanowires (TNWs). To study the activity and selectivity of the prepared catalyst (AuNPs@TNWs), an aqueous solution of 40 mM glycerol was irradiated with a green laser (λ = 530 nm, power = 100 mW) in the presence of the catalyst and O2 as an oxidant at 22 °C for 6 h, obtaining a glycerol conversion of 86% with a selectivity towards hydroxypyruvic acid (HA) of more than 90%. From the control and reactions, we concluded that the Ti-OH groups promote the glycerol adsorption on the nanowires surface and the surface plasmon of the gold nanoparticles favors the selectivity of the reaction towards the hydroxypyruvic acid.

Enhanced cold plasma hydrogenation with glycerol as hydrogen source for production of trans-fat-free margarine.

The quest for better nutritious foods has encouraged novel scientific investigations to find trans-fat reduction methods. This research proposes an innovative approach for the production of healthier trans-fat-free margarine from palm oil by the use of dielectric barrier discharge (DBD) plasma technology with glycerol serving as the principal source of hydrogen. The effectiveness of DBD plasma in hydrogenating palm olein was investigated. By employing a methodical series of experiments and thorough analytical approaches, examination of the saturated fatty acid conversion experienced its iodine value (IV) reduction from 67.16 ± 0.70 to 31.61 ± 1.10 under the optimal process parameters of 1 L min-1 He flow rate, 35 W plasma discharge power, 10 mm gap size, ambient initial temperature, and 12 h reaction time with solid texture. According to the method for producing trans-fat-free margarine in the absence of a catalyst and H2 gas, the hydrogenation rate of the prepared mixture of palm olein-glycerol was remarkably improved; the trans-fat content in the produced product was zero; the efficacy of incorporating cis- and trans-isomerization was lowered, and the method has a promising industrial application prospect.

Efficient Electrocatalytic Oxidation of Glycerol to Formate Coupled with Nitrate Reduction over Cu-doped NiCo Alloy Supported on Nickel Foam.

Electrooxidation of biomass-derived glycerol which is regarded as a main byproduct of industrial biodiesel production, is an innovative strategy to produce value-added chemicals, but currently showcases slow kinetics, limited Faraday efficiency, and unclear catalytic mechanism. Herein, we report high-efficiency electrooxidation of glycerol into formate via a Cu doped NiCo alloy catalyst supported on nickel foam (Cu-NiCo/NF) in a coupled system paired with nitrate reduction. The designed Cu-NiCo/NF delivers only 1.23 V vs. RHE at 10 mA cm-2, and a record Faraday efficiency of formate of 93.8%. The superior performance is ascribed to the rapid generation of NiIII-OOH and CoIII-OOH and favorable coupling of surface *O with reactive intermediates. Using Cu-NiCo/NF as a bifunctional catalyst, the coupled system synchronously produces NH3 and formate, showing 290 mV lower than the coupling of hydrogen evolution reaction, together with excellent long-term stability for up to 144 h. This work lays out new guidelines and reliable strategies from catalyst design to system coupling for biomass-derived electrochemical refinery.

Glycerol carbonate and solketal carbonate as circular economy bricks for supercapacitors and potassium batteries.

Considering the worldwide market of batteries and supercapacitors, the (partial or total) replacement of conventional fossil-derived carbonates with bio-based ones in electrolyte formulations would allow the production of safer and more sustainable devices. In this work, embracing the 7th principle of green chemistry, glycerol derivatives (namely glycerol carbonate and solketal carbonate) are tested as solvents and additives for electrolyte formulations. Glycerol carbonate is innovatively employed as promising electrolyte solvent for electric double-layer capacitors with excellent performances. On the other hand, a solketal carbonate-laden liquid electrolyte is investigated for potassium-based batteries, showing a rather stable electrochemical behaviour and performance close to those of commercial oil-derived alternatives.

Ozone-Assisted Cu-Based Catalysts for the Efficient Electro-Reforming Glycerol to Formic Acid.

Glycerol electrooxidation reaction (GOR) to produce value-added chemicals, such as formic acid, could make more efficient use of abundant glycerol and meet future demand for formic acid as a fuel for direct or indirect formic acid fuel cells. Non-noble metal Cu-based catalysts have great potential in electro-reforming glycerol to formic acid. However, the high activity, selectivity and stability of Cu based catalysts in GOR cannot be achieved simultaneously. Here, we used ozone-assisted electrocatalyst to convert glycerol to formic acid under alkaline conditions, the onset potential was reduced by 60 mV, the Faraday efficiency (FE) reached 95%. The catalyst has excellent stability within 300 h at the current density of 10 mA cm-2. The electron spin resonance proved that ozone produced superoxide anion during the GOR. In situ Raman spectroscopy, electrochemical studies showed that glycerol can be activated with ozone in GOR, and the C-C bond can be broken to reduce the polymerization of glycerol on the catalyst surface, so as to produce more formic acid at a lower voltage. Moreover, the removal of dissolved O3 from water can be up to 100% after 30 minutes of GOR reaction at a solubility of 50 mg L-1 as measured by UV-VIS spectrophotometry.

Contrast efficacy of novel phase convertible nanodroplets for safe CEUS imaging.

Microbubble contrast agents in ultrasound/echocardiography are used to increase the echogenicity of the target tissues, thereby raising the contrast resolution of the resultant image. Recently, the trend has shifted toward the development of phase-convertible nanodroplets as ultrasound contrast agents due to their promising theragnostic potential by switching capability at the active site. Herein, we fabricated pre-PGS- perfluoropentane phase convertible nanodroplets and checked their in vitro and in vivo enhancement and safety profile. For this, we performed experiments on 20 male Wistar rats and 2 dogs. Biochemical assays of both rats and dogs included complete blood profiles, liver function tests, and renal function tests. For rat vitals, monitoring and histopathological analysis were also performed. Converted nanodroplets showed excellent contrast enhancement, better than Sonovue upon in vitro testing, with an enhancement time of up to 14 min. In vivo, experiments showed comparable opacification of the ventricles of both rats and dogs. All biochemical assays remained within the normal range during the study period. The histopathological analysis did not show any signs of drug-induced toxicity, showing the safety of these nanodroplets. Pre-PGS-PFP nanodroplets hold great potential for use in echocardiography and abdominal imaging in both human and veterinary applications after clinical trials.

Development of New Edible Biodegradable Films Containing Camu-Camu and Agro-Industry Residue.

The use of edible films has garnered significant interest in the food and environmental sectors due to their potential to prevent food deterioration and their biodegradability. This study aimed to develop and characterize edible films based on camu-camu residue, gelatin, and glycerol, evaluating their solubility, thermal, degradability, antioxidant, and water vapor permeability properties of the gelatin matrix. This is the first study incorporating camu-camu into a gelatin and glycerol matrix. The films produced with camu-camu residue were manageable and soluble, with some non-soluble residues, providing a shiny and well-presented appearance. In the biodegradation results, samples 3 and 4 appeared to degrade the most, being two of the three most affected samples in the triplicate. The films showed degradation modifications from the third day of the experiment. In the germination and plant growth analysis, sample 4 exhibited satisfactory development compared to the other samples, emerging as the sample with the best overall result in the analyses, attributed to a 13.84 cm increase in the growth of the upper part of the seedling. These results indicate that the produced materials have potential for food packaging applications.

Green solvent-based extraction of three Fabaceae species: A potential antioxidant, anti-diabetic, and anti-leishmanial agents.

The Fabaceae is renowned for its diverse range of chemical compounds with significant biological activities, making it a valuable subject for pharmacological studies. The chemical composition and biological activities of three Fabaceae species were investigated using methanol separately and in combination with dimethyl sulfoxide (DMSO) and glycerol for extraction. The results revealed the highest phenolic (49.59 ± 0.38 mg gallic acid equivalent/g), flavonoid (29.16 ± 0.39 mg rutin equivalent/g), and alkaloid (14.23 ± 0.54 mg atropine equivalent/g) contents in the Caesalpinia decapetala methanol extracts. The 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity and DNA protection activity were the highest (0.88 ± 0.43 µg/mL IC50 and 2149.26 band intensity) in Albizia julibrissin methanol extracts. The α-amylase activity was highest in all methanol extracts (<15 µg/mL IC50 values), while the α-glucosidase inhibition potential was highest (<1 µg/mL IC50 value) in the methanol-glycerol and methanol-DMSO extracts. Pearson coefficient analysis showed a strong positive correlation between the DPPH and α-amylase assays and phytochemicals. Anti-leishmanial activity was observed in decreasing order: A. julibrissin (74.75 %) > C. decapetala (70.86 %) > Indigofera atropurpurea (65.34 %). Gas chromatography-mass spectrometry revealed 33 volatile compounds and, aamong these (Z)-9-octadecenamide was detected in the highest concentration ranging from 21.85 to 38.61 %. Only the methanol extracts of the examined species could be assessed for in vivo studies for immediate applications.

High production of enantiopure (R,R)-2,3-butanediol from crude glycerol by Klebsiella pneumoniae with an engineered oxidative pathway and a two-stage agitation strategy.

BACKGROUND: (R,R)-2,3-butanediol (BDO) is employed in a variety of applications and is gaining prominence due to its unique physicochemical features. The use of glycerol as a carbon source for 2,3-BDO production in Klebsiella pneumoniae has been limited, since 1,3-propanediol (PDO) is generated during glycerol fermentation. RESULTS: In this study, the inactivation of the budC gene in K. pneumoniae increased the production rate of (R,R)-2,3-BDO from 21.92 ± 2.10 to 92.05 ± 1.20%. The major isomer form of K. pneumoniae (meso-2,3-BDO) was shifted to (R,R)-2,3-BDO. The purity of (R,R)-2,3-BDO was examined by agitation speed, and 98.54% of (R,R)-2,3-BDO was obtained at 500 rpm. However, as the cultivation period got longer, the purity of (R,R)-2,3-BDO declined. For this problem, a two-step agitation speed control strategy (adjusted from 500 to 400 rpm after 24 h) and over-expression of the dhaD gene involved in (R,R)-2,3-BDO biosynthesis were used. Nevertheless, the purity of (R,R)-2,3-BDO still gradually decreased over time. Finally, when pure glycerol was replaced with crude glycerol, the titer of 89.47 g/L of (R,R)-2,3-BDO (1.69 g/L of meso-2,3-BDO), productivity of 1.24 g/L/h, and yield of 0.35 g/g consumed crude glycerol was achieved while maintaining a purity of 98% or higher. CONCLUSIONS: This study is meaningful in that it demonstrated the highest production and productivity among studies in that produced (R,R)-2,3-BDO with a high purity in Klebsiella sp. strains. In addition, to the best of our knowledge, this is the first study to produce (R,R)-2,3-BDO using glycerol as the sole carbon source.

Evaluation of Chemical and Physical Triggers for Enhanced Photosynthetic Glycerol Production in Different Dunaliella Isolates.

The salt-tolerant marine microalgae Dunaliella tertiolecta is reported to generate significant amounts of intracellular glycerol as an osmoprotectant under high salt conditions. This study highlights the phylogenetic distribution and comparative glycerol biosynthesis of seven new Dunaliella isolates compared to a D. tertiolecta reference strain. Phylogenetic analysis indicates that all Dunaliella isolates are newly discovered and do not relate to the D. tertiolecta reference. Several studies have identified light color and intensity and salt concentration alone as the most inducing factors impacting glycerol productivity. This study aims to optimize glycerol production by investigating these described factors singularly and in combination to improve the glycerol product titer. Glycerol production data indicate that cultivation with white light of an intensity between 500 and 2000 µmol m-2 s-1 as opposed to 100 µmol m-2 s-1 achieves higher biomass and thereby higher glycerol titers for all our tested Dunaliella strains. Moreover, applying higher light intensity in a cultivation of 1.5 M NaCl and an increase to 3 M NaCl resulted in hyperosmotic stress conditions, providing the highest glycerol titer. Under these optimal light intensity and salt conditions, the glycerol titer of D. tertiolecta could be doubled to 0.79 mg mL-1 in comparison to 100 µmol m-2 s-1 and salt stress to 2 M NaCl, and was higher compared to singularly optimized conditions. Furthermore, under the same conditions, glycerol extracts from new Dunaliella isolates did provide up to 0.94 mg mL-1. This highly pure algae-glycerol obtained under optimal production conditions can find widespread applications, e.g., in the pharmaceutical industry or the production of sustainable carbon fibers.

The Increase in the Plasticity of Microcrystalline Cellulose Spheres' When Loaded with a Plasticizer.

Compaction pressure can induce an undesirable solid-state polymorphic transition in drugs, fragmentation, loss of coated pellet integrity, and the decreased viability and vitality of microorganisms. Thus, the excipients with increased plasticity can be considered as an option to decrease the undesirable effects of compaction pressure. This study aims to increase the plasticity (to reduce the mean yield pressure; Py) of dried microcrystalline cellulose (MCC) by loading it with a specially selected plasticizer. Diethyl citrate (DEC), water, and glycerol were the considered plasticizers. Computation of solubility parameters was used to predict the miscibility of MCC with plasticizers (possible plasticization effect). Plasticizer-loaded MCC spheres with 5.0 wt.% of water, 5.2 wt.% of DEC, and 4.2 wt.% glycerol were obtained via the solvent method, followed by solvent evaporation. Plasticizer-loaded formulations were characterised by TGA, DSC, pXRD, FTIR, pressure-displacement profiles, and in-die Heckel plots. Py was derived from the in-die Heckel analysis and was used as a plasticity parameter. In comparison with non-plasticized MCC (Py = 136.5 MPa), the plasticity of plasticizer-loaded formulations increased (and Py decreased) from DEC (124.7 MPa) to water (106.6 MPa) and glycerol (99.9 MPa), and that was in full accordance with the predicted miscibility likeliness order based on solubility parameters. Therefore, water and glycerol were able to decrease the Py of non-plasticized MCC spheres by 16.3 and 30.0%, respectively. This feasibility study showed the possibility of modifying the plasticity of MCC by loading it with a specially selected plasticizer.

Effect of glycerol supplementation in early lactation on metabolic health, milking activity, and production of dairy cows in automated milking system herds.

The objective of this study was to quantify the effects of supplementing early-lactation cows with a dry pure glycerol product, delivered through the automated milking system (AMS) concentrate, in the first 21 d in milk (DIM) on metabolic markers, milking behavior, and milk production. In 5 commercial AMS dairy herds, 389 dairy cows were randomly assigned, controlling for parity, 21 d before expected calving to 1 of 2 treatments, within farm: (1) control group (CON) receiving the standard AMS pellet (n = 213) from 1 to 150 DIM, or (2) glycerol group (GLY) receiving the treatment AMS pellet (n = 176) formulated to deliver 250 as fed g/d of glycerol product from 1 to 21 DIM (mean actual = 249 g/d dry matter [DM]), then they received the standard AMS pellet from 22 to 150 DIM. Across all farms, cows were fed partial mixed rations (PMR) that were similar in ingredient and nutrient composition. One prepartum blood sample and 5 postpartum blood samples were collected from each cow to determine serum nonesterified fatty acids (NEFA), blood ß-hydroxy butyrate (BHB), and blood glucose concentrations. Cow body condition score (BCS) was recorded every 21 d from -21 to 63 DIM. Data were collected and analyzed for the treatment period (1 to 21 DIM) and a follow-up period (22 to 150 DIM). There was no detected treatment effect on serum NEFA concentrations in the first week of lactation. There was a treatment by time interaction for blood BHB and blood glucose, where GLY cows tended to have increased BHB concentrations at 5 DIM and had decreased glucose concentrations at 9 and 12 DIM. There was an interaction of BCS with treatment on the incidence of BHB ≥1.2 mmol/L, whereby over-conditioned CON cows (BCS ≥3.5) were 3.5x more likely to have a high BHB test than CON cows with normal prepartum BCS. During the treatment period GLY cows had 0.1 ± 0.05 more successful milkings/d, were delivered 0.27 ± 0.05 DM kg/d more AMS concentrate and tended to yield 0.8 ± 0.47 kg/d more milk. During the follow-up period GLY cows had 0.1 ± 0.04 more successful milkings/d, were delivered 0.18 ± 0.06 DM kg/d more AMS concentrate, and yielded 1.5 ± 0.53 kg/d more milk than CON cows. Glycerol supplementation allowed cows to maintain better BCS, as GLY cows lost less BCS from calving to 63 DIM than CON cows. Overall, the results of this study demonstrate that supplementing pure glycerol through the AMS concentrate for the first 21 DIM can reduce BCS loss in early lactation, improve milking behavior, and increase milk yield to mid lactation.

Inducible biosynthesis of bacterial cellulose in recombinant Enterobacter sp. FY-07.

Bacterial cellulose (BC) is an extracellular polysaccharide with myriad unique properties, such as high purity, water-holding capacity and biocompatibility, making it attractive in materials science. However, genetic engineering techniques for BC-producing microorganisms are rare. Herein, the electroporation-based gene transformation and the λ Red-mediated gene knockout method with a nearly 100 % recombination efficiency were established in the fast-growing and BC hyperproducer Enterobacter sp. FY-07. This genetic manipulation toolkit was validated by inactivating the protein subunit BcsA in the cellulose synthase complex. Subsequently, the inducible BC-producing strains from glycerol were constructed through inducible expression of the key gene fbp in the gluconeogenesis pathway, which recovered >80 % of the BC production. Finally, the BC properties analysis results indicated that the induced-synthesized BC pellicles were looser, more porous and reduced crystallinity, which could further broaden the application prospects of BC. To our best knowledge, this is the first attempt to construct the completely inducible BC-producing strains. Our work paves the way for increasing BC productivity by metabolic engineering and broadens the available fabrication methods for BC-based advanced functional materials.

Involvement of 2-deoxyglucose-6-phosphate phosphatases in facilitating resilience against ionic and osmotic stress in Saccharomyces cerevisiae.

The Saccharomyces cerevisiae DOG genes, DOG1 and DOG2, encode for 2-deoxyglucose-6-phosphate phosphatases. These enzymes of the haloacid dehalogenase superfamily are known to utilize the non-natural 2-deoxyglucose-6-phosphate as their substrate. However, their physiological substrate and hence their biological role remain elusive. In this study, we investigated their potential role as enzymes in biosynthesizing glycerol through an alternative pathway, which involves the dephosphorylation of dihydroxyacetone phosphate into dihydroxyacetone, as opposed to the classical pathway which utilizes glycerol 3-phosphate. Overexpression of DOG1 or DOG2 rescued the osmotic and ionic stress-sensitive phenotype of gpp1∆ gpp2∆ or gpd1∆ gpd2∆ mutants, both affected in the production of glycerol. While small amounts of glycerol were observed in the DOG overexpression strains in the gpp1∆ gpp2∆ background, no glycerol was detected in the gpd1∆ gpd2∆ mutant background. This indicates that overexpression of the DOG enzymes can rescue the osmosensitive phenotype of the gpd1∆ gpd2∆ mutant independent of glycerol production. We also did not observe a drop in glycerol levels in the gpp1∆ gpp2∆ dog1∆ dog2∆ as compared to the gpp1∆ gpp2∆ mutant, indicating that the Dog enzymes are not involved in glycerol biosynthesis. This indicates that Dog enzymes have a distinct substrate and their function within the cell remains undiscovered. IMPORTANCE: Yeast stress tolerance is an important characteristic that is studied widely, not only regarding its fundamental insights but also for its applications within the biotechnological industry. Here, we investigated the function of two phosphatase encoding genes, DOG1 and DOG2, which are induced as part of the general stress response pathway, but their natural substrate in the cells remains unclear. They are known to dephosphorylate the non-natural substrate 2-deoxyglucose-6-phosphate. Here, we show that overexpression of these genes overcomes the osmosensitive phenotype of mutants that are unable to produce glycerol. However, in these overexpression strains, very little glycerol is produced indicating that the Dog enzymes do not seem to be involved in a previously predicted alternative pathway for glycerol production. Our work shows that overexpression of the DOG genes may improve osmotic and ionic stress tolerance in yeast.

The role of glycerol in manufacturing freeze-dried chitosan and cellulose foams for mechanically stable scaffolds in skin tissue engineering.

Various strategies have extensively explored enhancing the physical and biological properties of chitosan and cellulose scaffolds for skin tissue engineering. This study presents a straightforward method involving the addition of glycerol into highly porous structures of two polysaccharide complexes: chitosan/carboxymethyl cellulose (Chit/CMC) and chitosan/oxidized cellulose (Chit/OC); during a one-step freeze-drying process. Adding glycerol, especially to Chit/CMC, significantly increased stability, prevented degradation, and improved mechanical strength by nearly 50%. Importantly, after 21 days of incubation in enzymatic medium Chit/CMC scaffold has almost completely decomposed, while foams reinforced with glycerol exhibited only 40% mass loss. It is possible due to differences in multivalent cations and polymer chain contraction, resulting in varied hydrogen bonding and, consequently, distinct physicochemical outcomes. Additionally, the scaffolds with glycerol improved the cellular activities resulting in over 40% higher proliferation of fibroblast after 21 days of incubation. It was achieved by imparting water resistance to the highly absorbent material and aiding in achieving a balance between hydrophilic and hydrophobic properties. This study clearly indicates the possible elimination of additional crosslinkers and multiple fabrication steps that can reduce the cost of scaffold production for skin tissue engineering applications while tailoring mechanical strength and degradation.

Start-up of glycerol-driven denitrifying phosphorus removal from wastewater: The effects of the microaerobic environment.

Glycerol, an abundant by-product of biodiesel production, represented a promising carbon source for enhancing nutrient removal from low C/N ratio wastewater. This study discovered a novel approach to initiate glycerol-driven denitrifying phosphorus removal (DPR) in situ by creating a short-term microaerobic environment within the aerobic zone. This approach facilitated the in-situ conversion of glycerol, which was subsequently utilized by denitrifying phosphate accumulating organisms (DPAOs) for DPR. The feasibility and stability of glycerol-driven DPR were validated in a continuous-flow pilot-scale reactor. Anaerobic phosphorus release increased from 1.0 mg/L/h to 2.5 mg/L/h, with fermentation bacteria and related functional genes showing significant increases. The stable stage exhibited 92.8% phosphorus removal efficiency and 55.5% DPR percentage. The microaerobic environment enhanced fermentation bacteria enrichment, crucial for glycerol-driven DPR stability. The collaborative interaction between fermentation bacteria and phosphate accumulating organisms (PAOs) played a key role in sustaining glycerol-driven DPR stability. These findings provide a robust theoretical foundation for applying glycerol-driven DPR in established wastewater treatment plants.

Production of sustainable thermoplastic composites from waste nitrogen fertilizer-grown marine filamentous cyanobacterium Geitlerinema sp.

The global demand for petroleum-derived plastics continues to increase, as does pollution caused by plastic consumption and landfilling plastic waste. Recycling waste plastics by thermomechanical molding may be advantageous, but it alone cannot address the challenges associated with plastic demand and its widespread pollution. A more sustainable and cleaner approach for recycling plastic waste could be to produce thermoplastic composite blends of waste plastic and biobased alternative materials such as marine algal biomass. In this study, Geitlerinema sp., a marine cyanobacterium, was cultivated with waste nitrogen fertilizer as a nitrogen source, resulting in phycocyanin content and biomass density of 6.5% and 0.7 g/L, respectively. The minimum and maximum tensile strengths of thermoplastic blends containing Geitlerinema sp. biomass, recycled glycerol plasticizer, and waste plastic were 0.29-23.2 MPa, respectively. The tensile strength and Young's modulus of thermoplastic composites decreased as the Geitlerinema sp. biomass concentration increased. Furthermore, thermal analysis revealed that thermoplastics containing Geitlerinema sp. biomass have lower thermal onset and biomass degradation temperatures than waste polyethylene. Nevertheless, 35-50% of Geitlerinema sp. biomass could be a sustainable biobased alternative feedstock for producing thermoplastic blends, making the recycling of waste plastics more sustainable and environmentally friendly.