RESUMO
Solar thermal utilization has broad applications in a variety of fields. Currently, maximizing the photo-thermal conversion efficiency remains a research hotspot in this field. The exquisite plant structures in nature have greatly inspired human structural design across many domains. In this work, inspired by the photosynthesis of helical grass, a HM type solar absorber made in graphene-based composite sheets is used for solar thermal conversion. The unique design promoted more effective solar energy into thermal energy through multiple reflections and scattering of solar photons. Notably, the Helical Micropillar (HM) is fabricated using a one-step projection 3D printing process based on a special 3D helical beam. As a result, the solar absorber's absorbance value can reach 0.83 in the 400-2500 nm range, and the surface temperature increased by ≈128.3% relative to the original temperature. The temperature rise rate of the solar absorber reached 22.4 °C min-1, demonstrating the significant potential of the HM in practical applications of solar thermal energy collection and utilization.
RESUMO
TiO2-based mixed oxide-carbon composite support for Pt electrocatalysts provides higher stability and CO tolerance under the working conditions of polymer electrolyte membrane fuel cells compared to traditional carbon supports. Non-traditional carbon materials like graphene nanoplatelets and graphite oxide used as the carbonaceous component of the composite can contribute to its affordability and/or functionality. Ti(1-x)MoxO2-C composites involving these carbon materials were prepared through a sol-gel route; the effect of the extension of the procedure through a solvothermal treatment step was assessed. Both supports and supported Pt catalysts were characterized by physicochemical methods. Electrochemical behavior of the catalysts in terms of stability, activity, and CO tolerance was studied. Solvothermal treatment decreased the fracture of graphite oxide plates and enhanced the formation of a reduced graphene oxide-like structure, resulting in an electrically more conductive and more stable catalyst. In parallel, solvothermal treatment enhanced the growth of mixed oxide crystallites, decreasing the chance of formation of Pt-oxide-carbon triple junctions, resulting in somewhat less CO tolerance. The electrocatalyst containing graphene nanoplatelets, along with good stability, has the highest activity in oxygen reduction reaction compared to the other composite-supported catalysts.
RESUMO
Canola protein obtained from canola meal, a byproduct of the canola industry, is an economical biopolymer with promising film-forming properties. It has significant potential for use as a food packaging material, though it possesses some functional limitations that need improvement. Incorporating nanomaterials is an option to enhance functional properties. This study aims to produce canola protein films by integrating GO exfoliated at several oxidation times and weight ratios to optimize mechanical, thermal, and barrier properties. Oxidation alters the C/O ratio and adds functional groups that bond with the amino/carboxyl groups of protein, enhancing the film properties. Significant improvement was obtained in GO at 60 and 120 min oxidation time and 3% addition level. Tensile strength and elastic modulus increased 200% and 481.72%, respectively, compared to control. Control films showed a 37.57 × 10-3 cm3m/m2/day/Pa oxygen permeability, and it was significantly reduced to 5.65 × 10-3 cm3m/m2/day/Pa representing a 665% reduction.
Assuntos
Embalagem de Alimentos , Grafite , Nanopartículas , Proteínas de Plantas , Resistência à Tração , Embalagem de Alimentos/instrumentação , Grafite/química , Nanopartículas/química , Proteínas de Plantas/química , Brassica napus/química , Permeabilidade , OxirreduçãoRESUMO
Acinetobacter baumannii (A. baumannii) is a pathogenic bacterium that causes severe infections and its rapid and reliable diagnosis is essential for effective control and treatment. In this study, we present an electrochemical aptasensor based on a signal amplification strategy for the detection of A. baumannii, the high specificity and affinity of the aptamer for the target make it favorable for signal amplification. This allows for a highly sensitive and selective detection of the target. The aptasensor is based on a carbon screen-printed electrode (CSPE) that has been modified with a nanocomposite consisting of multi-walled carbon nanotubes (MWCNTs), reduced graphene oxide (rGO), chitosan (CS), and a synthesized carbon quantum dot (CQD) from CS. Additionally, the self-assembled aptamers were immobilized on hemin-graphite oxide (H-GO) as a signal probe. The composition of the nanocomposite (rGO-MWCNT/CS/CQD) provides high conductivity and stability, facilitating the efficient capture of A. baumannii onto the surface of the aptasensor. Also, aptamer immobilized on Hemin-graphite oxide (H-GO/Aptamer) was utilized as an electrochemical signal reporter probe by H reduction. This approach improved the detection sensitivity and the aptamer surface density for detecting A. baumannii. Furthermore, under optimized experimental conditions, the aptasensor was demonstrated to be capable of detecting A. baumannii with a linear range of (10 - 1 × 107 Colony-forming unit (CFU)/mL) and a limit of detection (LOD) of 1 CFU/mL (σ = 3). One of the key features of this aptasensor is its ability to distinguish between live and dead bacteria cells, which is very important and critical for clinical applications. In addition, we have successfully detected A. baumannii bacteria in healthy human serum and skim milk powder samples provided using the prepared electrochemical aptasensor. The functional groups present in the synthetic CQD, rGO-MWCNT, and chitosan facilitate biomolecule immobilization and enhance stability and activity. The fast electron-transfer kinetics and high conductivity of these materials contribute to improved sensitivity and selectivity. Furthermore, The H-GO/Aptamer composite's large surface area increases the number of immobilized secondary aptamers and enables a more stable structure. This large surface area also facilitates more H loading, leading to signal amplification.
Assuntos
Acinetobacter baumannii , Quitosana , Grafite , Nanotubos de Carbono , Pontos Quânticos , Humanos , Hemina , Bactérias , EletrodosRESUMO
In this review, fundamental aspects of the electrochemical intercalation of anions into graphite have been first summarized, and then described the electrochemical preparation of covalent-type GICs and application of graphite as the cathode of dual-ion battery. Electrochemical overoxidation of anion GICs provides graphite oxide and covalent-fluorine GICs, which are key functional materials for various applications including energy storage devices. The reaction conditions to obtain fully oxidized graphite has been mentioned. Concerning the application of graphite for the cathode of dual-ion battery, it stably delivers about 110â mA h g-1 of reversible capacity in usual organic electrolyte solutions. The combination of anion and solvent as well as the concentration of the anions in the electrolyte solutions greatly affect the performance of graphite cathode such as oxidation potential, rate capability, cycling properties, etc. The interfacial phenomenon is also important, and fundamental studies of charge transfer resistance, anion diffusion coefficient, and surface film formation behavior have also been summarized. The use of smaller anions, such as AlCl4 -, Br- can increase the capacity of graphite cathode. Several efforts on the structural modification of graphite and development of electrolyte solutions in which graphite cathode delivers higher capacity were also described.
RESUMO
In this work, 1 wt% of graphite oxide (GO) was used to strengthen the interface of carbon fibers (CF) reinforced polyetheretherketone (CFR-PEEK) composites, so as to obtain sufficiently high mechanical properties and bioactive surfaces which are two fundamental requirements for orthopedic/dental implants. Concretely, aminated GO was grafted onto oxidized CF in aqueous solution in a mild and non-toxic manner, subsequently, the CF grafted by GO was used for injection molding to prepare CFR-PEEK implant. The dispersibility of CF in the composites were remarkably boosted. Mechanical tests indicated that the flexural strength, compressive strength and hardness of CFR-PEEK were increased by 51%, 46%, and 30%, respectively. Furthermore, the flexural modulus increased to 11.67 ± 0.20 GPa and the compression modulus increased to 6.12 ± 0.11 GPa, which both meet the elastic modulus of human bone (6-30 GPa). The wear resistance was slightly improved. In the in vitro cell evaluation, CFR-PEEK with interface strengthening by GO showed no cytotoxicity and exhibited significantly enhanced adhesion and proliferation of Bone marrow mesenchymal stem cells (BMSCs) on the surface. More importantly, osteogenesis-related protein expression in vitro and osteogenetic evaluation in vivo all disclosed greatly accelerated osteo-differentiation of BMSCs on the composites due to the additive effect of GO at the interface. Based on this scheme, the CFR-PEEK composites with the dual functions of mechanical enhancement and osteointegration promotion holds great potential as implants in orthopedic/dental applications.
Assuntos
Grafite , Humanos , Osteogênese , Polímeros , Polietilenoglicóis/farmacologia , Cetonas , Fibra de CarbonoRESUMO
Graphite oxide (GO) is an excellent laccase immobilization material. However, the electrostatic interaction between graphene leads to the accumulation of GO, as well as the interaction with the surface of enzyme molecules causing protein denaturation and deactivation, which limits its further industrial application. In this study, the ionic liquids (ILs) modification strategy was proposed to improve the stability and catalytic performance of immobilized laccase. The laccase-ILs-MGO exhibited remarkable enzymatic properties, with significant enhancements in organic solvent tolerance, thermal and operational stability. The laccase-ILs-MGO system exhibited a remarkable removal efficiency of 95.5% towards 2,4-dichlorophenol (2,4-DCP) within 12 h and maintained over 70.0% removal efficiency after seven reaction cycles. In addition, the efficient elimination of other phenolic compounds and recalcitrant polycyclic aromatic hydrocarbons could also be accomplished. Molecular dynamics simulation and molecular docking studies demonstrated that immobilized laccase exhibited superior structural rigidity and stronger hydrogen bond interactions with substrates compared to free laccase, which was beneficial for the stability of both the laccase and substrate degradation efficiency. Therefore, this study proposed a simple and practical strategy for modifying GO with ILs, providing novel insights into developing efficient enzyme immobilization techniques.
Assuntos
Grafite , Líquidos Iônicos , Líquidos Iônicos/química , Grafite/química , Lacase/química , Lacase/metabolismo , Óxido de Magnésio , Simulação de Acoplamento Molecular , Enzimas Imobilizadas/química , Enzimas Imobilizadas/metabolismo , Óxidos , Fenóis , Fenômenos MagnéticosRESUMO
The effect of polydopamine (PDA) modification on aminated Fe3O4 nanoparticles (Fe3O4-NH2)/graphite oxide (GO)/ß-cyclodextrin polymer cross-linked by citric acid (CDP-CA) composites were studied for the removal of a cationic dye (methylene blue, MB) and an anionic dye (Congo red, CR) from waters. The micro-structural and magnetic characterizations confirmed the successful preparation of Fe3O4-NH2/GO/CDP-CA and PDA/Fe3O4-NH2/GO/CDP-CA composites. The maximum MB and CR adsorption capacities of Fe3O4-NH2/GO/CDP-CA were 75 mg/g and 104 mg/g, respectively, while the corresponding amounts for PDA/Fe3O4-NH2/GO/CDP-CA composite were 195 mg/g and 64 mg/g, respectively. The dye sorption behaviors of these two composites were explained by their corresponding surface-charged properties according to the measured zeta potential results. Moreover, the high saturation magnetizations and the stable dye removal rate in the adsorption-desorption cycles indicated the good recyclability and reusability of the fabricated composites.
Assuntos
Ciclodextrinas , Grafite , Grafite/química , Ácido Cítrico , Óxidos/química , Adsorção , Fenômenos MagnéticosRESUMO
With the normalization of epidemic prevention and control, air filters are being used and replaced more frequently. How to efficiently utilize air filter materials and determining whether they have regenerative properties have become current research hotspots. This paper discusses the regeneration performance of reduced graphite oxide filter materials, which were studied in depth using water cleaning and the relevant parameters, including the cleaning times. The results showed that water cleaning was most effective using a 20 L/(s·m2) water flow velocity with a 17 s cleaning time. The filtration efficiency decreased as the number of cleanings increased. Compared to the blank group, the filter material's PM10 filtration efficiency decreased by 0.8%, 19.4%, 26.5%, and 32.4% after the first to fourth cleanings, respectively. The filter material's PM2.5 filtration efficiency increased by 12.5% after the first cleaning, and decreased by 12.9%, 17.6%, and 30.2% after the second to fourth cleanings, respectively. The filter material's PM1.0 filtration efficiency increased by 22.7% after the first cleaning, and decreased by 8.1%, 13.8%, and 24.5% after the second to fourth cleanings, respectively. Water cleaning mainly affected the filtration efficiency of particulates sized 0.3-2.5 µm. Reduced graphite oxide air filter materials could be water washed twice and maintain cleanliness equal to 90% of the original filter material. Water washing more than twice could not achieve the standard cleanliness equal to 85% of the original filter material. These data provide useful reference values for the evaluation of the filter materials' regeneration performance.
RESUMO
Excellent through-plane thermally conductive composites are highly demanded for efficient heat dissipation. Giant sheets have large crystalline domain and significantly reduce interface phonon scattering, making them promising to build highly thermally conductive composites. However, realizing vertical orientation of giant sheets remains challenging due to their enormous mass and huge hydrodynamic drag force. Here, we achieve highly vertically ordered liquid crystals of giant graphite oxide (more than 100 µm in lateral dimension) by microwire shearing, which endows the composite with a recorded through-plane thermal conductivity of 94 W m-1 K-1 . Microscale shearing fields induced by vertical motion of microwires conquer huge hydrodynamic energy barrier and vertically reorient giant sheets. The resulting liquid crystals exhibit extremely retarded relaxation and impart large-scale vertical array with bidirectional ordering degree as high as 0.82. The graphite array-based composites demonstrate an ultrahigh thermal enhancement efficiency of over 35 times per unit volume. Furthermore, the composites improve cooling efficiency by 93% for thermal management tests compared to commercial thermal interface materials. This work offers a novel methodology to precisely manipulate the orientation of giant particles and promote large-scale fabrication of vertical array with advanced functionalities.
RESUMO
In this research, a novel composite material composed of Metal-Organic Framework material (MOF) and graphite oxide was synthesized and evaluated as a possible drug-loading vehicle. HKUST-1, a MOF material originally designed by the Hong Kong University of Science and Technology, was used as a model porous material. The aim was to synthesize a drug delivery vehicle for modifying the release kinetics and solubility of poorly soluble drugs (BSC Class II drugs); these are drugs that are known to have poor bioavailability due to their low solubility. We used ketoprofen, ibuprofen, and felodipine as models for BSC Class II drugs. The drugs were loaded onto composite materials through adsorption. The adsorption of these three drugs into the matrix of HKUST-1/GO (graphite oxide), HKUST-1, and graphite oxide was compared. The loading efficiency of the drugs onto the carrier was dependent on the drug molecule and the composition of the drug carrier. The inclusion of graphite oxide in the drug carrier matrix improved the drug loading capacity and modified the drug release rate. The loading of the three drugs felodipine, ketoprofen, and ibuprofen onto HKUST-1 were 33.7, 58, and 79 mg/g respectively. The incorporation of GO into the HKUST-1 matrix resulted in an increase in the loading by 16 and 4 mg/g for the ketoprofen and ibuprofen drugs. When compared to the pure drugs, the solubility of all three drugs in the HKUST-1/GO matrix increased by at least 6 folds.
RESUMO
The comparative study of sorption of polar substances acetonitrile and water into powders and membranes (>10 µm thick) of modified Hummers (HGO) and Brodie (BGO) graphite oxides was performed using isopiestic method (IM) and differential scanning calorimetry (DSC). Additional sorption data were obtained for pyridine and 1-octanol. Sorption measurements were accompanied by conventional XRD and XPS control. Electron paramagnetic resonance (EPR) was additionally used to characterize ordering of the membranes. The impact on sorption of synthetic procedure (Brodie or Hummers), method of making membranes, chemical nature of the sorbent, and method of sorption was systematically examined. It was demonstrated that variations in synthetic procedures within both Hummers and Brodie methods did not lead to changes in the sorption properties of the corresponding powders. Sorption of acetonitrile and pyridine was reduced by approximately half when switching from powders to membranes at ambient temperature. DSC measurements at a lower temperature gave equal sorption of acetonitrile into HGO powder and membranes. Water has demonstrated unique sorption properties. Equal sorption of water was measured for HGO membranes and powders at T = 298 K and at T = 273 K. It was demonstrated that lowering the orientational alignment of the membranes led to the increase of sorption. In practice this could allow one to tune sorption/swelling and transport properties of the GO membranes directly by adjusting their internal ordering without the use of any composite materials.
RESUMO
Charge-discharge behaviors of various graphene-like graphite (GLG) samples have been investigated, and factors affecting them were discussed. By changing the oxidation method of graphite to obtain the precursor material of graphite oxide and heat treatment temperature of it, GLG samples with various structural parameters were successfully prepared. The onset potential of intercalation changed mainly depending on the interlayer spacing and decreased with its increase. The oxygen content was also important especially for GLG with smaller interlayer spacings. The influence of oxygen became apparent when the intercalation of bis(fluorosulfonyl)amide ions was performed. The onset potential considerably decreased for GLG with larger oxygen contents. The capacity of GLG increased with the increase in oxygen content to reach a maximum value of 149â mAh g-1 and then slightly decreased.
RESUMO
The X-ray absorption near-edge structure (XANES) in the C K region of graphite oxide (GO) exhibits a complicated and broad profile in the π* (285 eV)-σ* (293 eV) region due to oxygenated carbon atoms. To clarify the oxidation effect on carbon atoms in the spectral profile of GO, we measured the C K-XANES of various oxygenated aromatic compounds and theoretically analyzed them using density function theory (DFT) calculations. From the measured and calculated C K-XANES, the π* peaks of oxygenated carbon atoms shift to the higher-energy range by 0.5-4 eV from 285.5 eV of the typical π* peak of graphite. The energy positions of the shifted π* peaks depend on both the oxygenated functional groups and the molecular structures, confirming that the energy shifts of the π* peaks due to oxygenated carbon atoms cause the broad and complicated peak profiles in the π*-σ* region in C K-XANES of GO.
Assuntos
Grafite , Óxidos , Oxirredução , CarbonoRESUMO
Porous carbon-carbon composite materials (PCCCM) were synthesized by the alkaline dehydrochlorination of polyvinyl chloride solutions in dimethyl sulfoxide containing the modifying additives of a nanostructured component (NC): graphite oxide (GO), reduced graphite oxide (RGO) or nanoglobular carbon (NGC), with subsequent two-step thermal treatment of the obtained polyvinylene-NC composites (carbonization at 400 °C and carbon dioxide activation at 900 °C). The focus of the study was on the analysis and digital processing of transmission electron microscopy images to study local areas of carbon composite materials, as well as to determine the distances between graphene layers. TEM and low-temperature nitrogen adsorption studies revealed that the structure of the synthesized PCCCM can be considered as a porous carbon matrix in which either carbon nanoglobules (in the case of NGC) or carbon particles with the "crumpled sheet" morphology (in the case of GO or RGO used as the modifying additives) are distributed. Depending on the features of the introduced 5-7 wt.% nanostructured component, the fraction of mesopores was shown to vary from 11% to 46%, and SBET-from 791 to 1115 m2 g-1. The synthesis of PCCNC using graphite oxide and reduced graphite oxide as the modifying additives can be considered as a method for synthesizing a porous carbon material with the hierarchical structure containing both the micro- and meso/macropores. Such materials are widely applied and can serve as adsorbents, catalyst supports, elements of power storage systems, etc.
RESUMO
The polyelectrolyte (PE)-based water dispersion of graphene-related materials (GRMs) represents an interesting intermediate for the development of advanced materials by sustainable processes. Although the proof of concept has been demonstrated, there is a lack of knowledge for what concerns the effects of parameters typical of PEs such as functionalization, molecular weight, and charge density. In this work, we evaluate the effects of such parameters on the quality and long-term stability of reduced graphite oxide (rGO) dispersion in aqueous media prepared by ultrasound sonication in the presence of different PEs. Four PEs were evaluated: polyacrylic acid (PAA), branched poly(ethylenimine) (BPEI), sodium carboxymethyl cellulose (CMC), and poly(sodium 4-styrenesulfonic acid) (PSS). The prepared dispersions were thoroughly characterized by means of UV-visible spectroscopy, thermogravimetric analysis, dynamic light scattering, and Raman spectroscopy. The highest concentrations of rGO were achieved by BPEI with a molecular weight of 25,000 and 270,000 Da (33 and 26 µg/mL, respectively). For other PEs, the rGO concentration was found to be independent of the molecular weight. The PAA-based dispersions displayed the best through-time stability while yielding homogeneous dispersion with a smaller average size and narrower size distribution.
RESUMO
Scanning electron microscopy operated at cryogenic temperature (cryo-SEM) is a powerful tool for investigating surface and cross-sectional nanostructures of water-containing samples. Typically, cryo-SEM samples are frozen just before observation in specific metal carriers. However, pre-frozen samples are also of interest, such as frozen food and freeze-stored animal samples. In such cases, sample mounting with a defined orientation is required, but there has been a lack of ideal conductive adhesives that can be used without increasing the sample temperature. Here, we developed a mixture of graphite oxide and 1,3-butanediol as an adhesive, capable of gluing samples at dry-ice temperature and is frozen below that temperature. Dispersion of graphite oxide increased the conductivity and reduced the charge-up contrast. Acquisition of energy-dispersive X-ray spectrum, cross-sectional ion milling, and high-resolution imaging were successfully achieved using the adhesive. We tested and confirmed the usefulness of this new adhesive by applying it to cryo-SEM surface imaging of diatomite, freeze-fractured cross-sectional imaging of chicken liver, and ion milling cross-sectional imaging of a deep-sea snail. The new adhesive is not only useful for food science and field-preserved biological samples but also potentially applicable to wider fields such as archaeological and biological samples preserved under permafrost.
RESUMO
Graphene oxide (GO) has been recognized as a thermally unstable and energetic material, but surprisingly its environmental and safety risks were not fully explored, defined, and regulated. In this study, systematic explosivity and flammability characterizations of commercial GO materials were conducted to evaluate the influence of key parameters such as physical forms (paste, powders, films, and aerogels), temperature, heating rate, mass, and heating environment, as well as their potential safety and environmental impacts. Results based on thermogravimetric analysis (TGA) showed that GO in paste and powder forms have lower temperature thresholds (>180-192 °C) to initiate micro-explosions compared to GO film and aerogels (> 205 °C and 213 °C) regardless of the environment (inert, air, or oxygen). The observed explosive behavior can be explained by thermal runaway reactions as a result of thermal deoxygenation and decomposition of oxygen functional groups. Flammability rating and limiting oxygen index (LOI) results confirmed that GO films are flammable materials that can spontaneously propagate flame in a low oxygen environment (~11 %). These results provided new insights about potential safety and environmental risks of GO materials, which somehow were not considered, suggesting urgent actions to improve current safety protocols for labeling, handling, transporting, and storage practices from manufacturers to the end-users.
Assuntos
Grafite , Oxigênio , Pós , TemperaturaRESUMO
Amino acid complexes of zirconia represent an entirely new class of materials that were synthesized and studied for the first time for the decontamination of fluoride ion containing aqueous solutions. Glutamic and aspartic acid complexes of zirconia assembled with thin carbon (stacked graphene oxide) platelets deriving from graphite oxide (GO) were synthesized by a two-step method to prepare adsorbents. The characterization of the complexes was carried out using infrared spectroscopy to determine the functional groups and the types of interaction between the composites and fluoride ions. To reveal the mechanisms and extent of adsorption, two types of batch adsorption measurements were performed: (i) varying equilibrium fluoride ion concentrations to construct adsorption isotherms at pH = 7 in the absence of added electrolytes and (ii) using fixed initial fluoride ion concentrations (10 mg/L) with a variation of either the pH or the concentration of a series of salts that potentially interfere with adsorption. The experimental adsorption isotherms were fitted by three different theoretical isotherm equations, and they are described most appropriately by the two-site Langmuir model for both adsorbents. The adsorption capacities of Zr-glutamic acid-graphite oxide and Zr-aspartic acid-graphite oxide are 105.3 and 101.0 mg/g, respectively. We found that two distinct binding modes are combined in the Zr-amino acid complexes: at low solution concentrations, F- ions are preferentially adsorbed by coordinating to the surface Zr species up to a capacity of ca. 10 mg/g. At higher concentrations, however, large amounts of fluoride ions may undergo anion exchange processes and physisorption may occur on the positively charged ammonium moieties of the interfacially bound amino acid molecules. The high adsorption capacity and affinity of the studied dicarboxylate-type amino acids demonstrate that amino acid complexes of zirconia are highly variable materials for the safe and efficient capture of strong Lewis base-type ions such as fluoride.
Assuntos
Grafite , Poluentes Químicos da Água , Purificação da Água , Adsorção , Aminoácidos , Ácido Aspártico , Carbono , Fluoretos/química , Grafite/química , Concentração de Íons de Hidrogênio , Cinética , Óxidos , Água/química , Poluentes Químicos da Água/análise , Purificação da Água/métodos , Zircônio/químicaRESUMO
Reduced graphite oxide (rGO)-based materials have demonstrated promising potential for advanced oxidation processes. Along with its distinctive 2D characteristics, rGO offers the prospect of catalytic degradation of various kinds of organic pollutants from aqueous environments. The practical application of rGO as a metal-free catalyst material to promote the Fenton reaction depends on the degree of rGO reduction. In this regard, the rGO was prepared according to oxidation by modified Hummers' method and two-step reduction via hydrothermal and calcination in the N2 atmosphere. The as-prepared rGO was characterized in terms of X-ray diffraction, Fourier-transform infrared spectroscopy, thermal gravimetric analysis, scanning electron microscopy, UV-vis absorption spectroscopy, and transmission electron microscopy. The effectiveness of as-prepared rGO as a photocatalyst and the metal-free catalyst to decolorize different textile dyes, including basic red 46, basic red 18, and methylene blue, was investigated in visible/rGO and visible/rGO/H2O2 systems. The impact of operational factors such as catalyst dose, pH, and initial dye concentration was examined. The dye degradation process was investigated by the pseudo-first-order kinetic model. In addition, the recyclability of rGO in the visible/rGO/H2O2 system was examined.