Highly Durable Inverted Inorganic Perovskite/Organic Tandem Solar Cells Enabled by Multifunctional Additives.

Inverted perovskite/organic tandem solar cells (P/O TSCs) suffer from poor long-term device stability due to halide segregation in organic-inorganic hybrid wide-bandgap (WBG) perovskites, which hinders their practical deployment. Therefore, developing all-inorganic WBG perovskites for incorporation into P/O TSCs is a promising strategy because of their superior stability under continuous illumination. However, these inorganic WBG perovskites also face some critical issues, including rapid crystallization, phase instability, and large energy loss, etc. To tackle these issues, two multifunctional additives based on 9,10-anthraquinone-2-sulfonic acid (AQS) are developed to regulate the perovskite crystallization by mediating the intermediate phases and suppress the halide segregation through the redox-shuttle effect. By coupling with organic cations having the desirable functional groups and dipole moments, these additives can effectively passivate the defects and adjust the alignment of interface energy levels. Consequently, a record Voc approaching 1.3 V with high power conversion efficiency (PCE) of 18.59% could be achieved in a 1.78 eV bandgap single-junction inverted all-inorganic PSC. More importantly, the P/O TSC derived from this cell demonstrates a T90 lifetime of 1000 h under continuous operation, presenting the most stable P/O TSCs reported so far.

Modulation of Photoinduced Phase Segregation and Stress-Driven Nanoscale Cracking in Hybrid Halide Perovskite Solar Cells.

The negative effect of photoinduced halide segregation (PIHS) on the properties of hybrid halide perovskites poses a major obstacle for its future commercial application. Therefore, the in-depth understanding of halide-ion segregation and its causes is an urgent and intractable problem. When PIHS reaches a certain threshold, it will aggravate the deterioration of the film surface morphology and form nanoscale cracks. Herein, the formation mechanism and types of cracks are revealed by exploring the stress distribution in the film. Using the femtosecond time-resolved transient absorption spectroscopy, the ultrafast formation of the iodine rich phase is observed, which appears earlier than the bromine rich phase. In addition, the introduction of organic ligand didodecyldimethylammonium bromide can significantly inhibit PIHS and improve the surface morphology of the film, which can promote the device efficiency from 9.63 to 11.20%. This work provides a novel perspective for the exploration of the PIHS.

Axial-Equatorial Halide Ordering in Layered Hybrid Perovskites from Isotropic-Anisotropic 207 Pb NMR.

Bandgap-tuneable mixed-halide 3D perovskites are of interest for multi-junction solar cells, but suffer from photoinduced spatial halide segregation. Mixed-halide 2D perovskites are more resistant to halide segregation and are promising coatings for 3D perovskite solar cells. The properties of mixed-halide compositions depend on the local halide distribution, which is challenging to study at the level of single octahedra. In particular, it has been suggested that there is a preference for occupation of the distinct axial and equatorial halide sites in mixed-halide 2D perovskites. 207 Pb NMR can be used to probe the atomic-scale structure of lead-halide materials, but although the isotropic 207 Pb shift is sensitive to halide stoichiometry, it cannot distinguish configurational isomers. Here, we use 2D isotropic-anisotropic correlation 207 Pb NMR and relativistic DFT calculations to distinguish the [PbX6 ] configurations in mixed iodide-bromide 3D FAPb(Br1-x Ix )3 perovskites and 2D BA2 Pb(Br1-x Ix )4 perovskites based on formamidinium (FA+ ) and butylammonium (BA+ ), respectively. We find that iodide preferentially occupies the axial site in BA-based 2D perovskites, which may explain the suppressed halide mobility.

Bright and Stable Red Perovskite LEDs under High Current Densities.

Perovskite LEDs (PeLEDs) have emerged as a next-generation light-emitting technology. Recent breakthroughs were made in achieving highly stable near-infrared and green PeLEDs. However, the operational lifetimes (T50) of visible PeLEDs under high current densities (>10 mA cm-2) remain unsatisfactory (normally <100 h), limiting the possibilities in solid-state lighting and AR/VR applications. This problem becomes more pronounced for mixed-halide (e.g., red and blue) perovskite emitters in which critical challenges such as halide segregation and spectral instability are present. Here, we demonstrate bright and stable red PeLEDs based on mixed-halide perovskites, showing measured T50 lifetimes of up to ∼357 h at currents of ≥25 mA cm-2, a record for the operational stability of visible PeLEDs under high current densities. The devices produce intense and stable emission with a maximum luminance of 28,870 cd m-2 (radiance: 1584 W sr-1 m-2), which is record-high for red PeLEDs. Key to this demonstration is the introduction of sulfonamide, a dipolar molecular stabilizer that effectively interacts with the ionic species in the perovskite emitters. It suppresses halide segregation and migration into the charge-transport layers, resulting in enhanced stability and brightness of the mixed-halide PeLEDs. These results represent a substantial step toward bright and stable PeLEDs for emerging applications.

Halide Segregated Crystallization of Mixed-Halide Perovskites Revealed by In Situ GIWAXS.

Mixed-halide perovskites of the composition MAPb(BrxI1-x)3, which seem to exhibit a random and uniform distribution of halide ions in the absence of light, segregate into bromide- and iodide-rich phases under illumination. This phenomenon of halide segregation has been widely investigated in the photovoltaics context since it is detrimental for the material properties and ultimately the device performance of these otherwise very attractive materials. A full understanding of the mechanisms and driving forces has remained elusive. In this work, a study of the crystallization pathways and the mixing behavior during deposition of MAPb(BrxI1-x)3 thin films with varying halide ratios is presented. In situ grazing incidence wide-angle scattering (GIWAXS) reveals the distinct crystallization behavior of mixed-halide perovskite compositions during two different fabrication routes: nitrogen gas-quenching and the lead acetate route. The perovskite phase formation of mixed-halide thin films hints toward a segregation tendency since separate crystallization pathways are observed for iodide- and bromide-rich phases within the mixed compositions. Crystallization of the bromide perovskite phase (MAPbBr3) is already observed during spin coating, while the iodide-based fraction of the composition forms solvent complexes as an intermediate phase, only converting into the perovskite phase upon thermal annealing. These parallel crystallization pathways result in mixed-halide perovskites forming from initially halide-segregated phases only under the influence of heating.

Suppressing Halide Segregation via Pyridine-Derivative Isomers Enables Efficient 1.68 eV Bandgap Perovskite Solar Cells.

Light-induced phase segregation is one of the main issues restricting the efficiency and stability of wide-bandgap perovskite solar cells (WBG PSCs). Small organic molecules with abundant functional groups can passivate various defects, and therefore suppress the ionic migration channels for phase segregation. Herein, a series of pyridine-derivative isomers containing amino and carboxyl are applied to modify the perovskite surface. The amino, carboxyl, and N-terminal of pyridine in all of these molecules can interact with undercoordinated Pb2+ through coordination bonds and suppress halide ions migration via hydrogen bonding. Among them, the 5-amino-3-pyridine carboxyl acid (APA-3) treated devices win the champion performance, enabling an efficiency of 22.35% (certified 22.17%) using the 1.68 eV perovskite, which represents one of the highest values for WBG-PSCs. This is believed to be due to the more symmetric spatial distribution of the three functional groups of APA-3, which provides a better passivation effect independent of the molecular arrangement orientation. Therefore, the APA-3 passivated perovskite shows the slightest halide segregation, the lowest defect density, and the least nonradiative recombination. Moreover, the APA-3 passivated device retains 90% of the initial efficiency after 985 h of operation at the maximum power point, representing the robust durability of WBG-PSCs under working conditions.

Multifunctional Surface Treatment against Imperfections and Halide Segregation in Wide-Band Gap Perovskite Solar Cells.

Mixed-halide wide-band gap perovskites (WBPs) still suffer from losses due to imperfections within the absorber and the segregation of halide ions under external stimuli. Herein, we design a multifunctional passivator (MFP) by mixing bromide salt, formamidinium bromide (FABr) with a p-type self-assembled monolayer (SAM) to target the nonradiative recombination pathways. Photoluminescence measurement shows considerable suppression of nonradiative recombination rates after treatment with FABr. However, WBPs still remained susceptible to halide segregation for which the addition of 25% p-type SAM was effective to decelerate segregation. It is observed that FABr can act as a passivating agent of the donor impurities, shifting the Fermi-level (Ef) toward the mid-band gap, while p-type SAM could cause an overweight of Ef toward the valence band. Favorable band bending at the interface could prevent the funneling of carriers toward I-rich clusters. Instead, charge carriers funnel toward an integrated SAM, preventing the accumulation of polaron-induced strain on the lattice. Consequently, n-i-p structured devices with an optimal MFP treatment show an average open-circuit voltage (VOC) increase of about 20 mV and fill factor (FF) increase by 4% compared with the control samples. The unencapsulated devices retained 95% of their initial performance when stored at room temperature under 40% relative humidity for 2800 h.

Real Time Observation of Halide Segregation in Mixed Halide Perovskite Solar Cells.

In this work, a novel real-time current-voltage (J-V) absorbance spectroscopy (RTJAS) setup is introduced for directly observing halide segregation in mixed halide perovskite solar cells under broadband light illumination, simulating solar exposure. The setup incorporates a broadband light source calibrated to one sun irradiation and a CMOS camera for simultaneous capture of all diffracted wavelengths. J-V measurements are performed concurrently with absorbance spectra collection, enabling in situ analysis of light-induced degradation due to halide segregation, including bandgap shifts and cell performance data. Comparison of photoluminescence measurements with RTJAS data reveals differing rates of bandgap decrease, underscoring the advantages of real-time measurement techniques. The work highlights the importance of accounting for experimental conditions, such as humidity and voltage injection, which can accelerate halide segregation, ultimately emphasizing the need for careful consideration of experimental conditions to accurately characterize perovskite solar cell behavior under realistic conditions.

Thermal Disorder-Induced Strain and Carrier Localization Activate Reverse Halide Segregation.

The reversal of halide ions is studied under various conditions. However, the underlying mechanism of heat-induced reversal remains unclear. This work finds that dynamic disorder-induced localization of self-trapped polarons and thermal disorder-induced strain (TDIS) can be co-acting drivers of reverse segregation. Localization of polarons results in an order of magnitude decrease in excess carrier density (polaron population), causing a reduced impact of the light-induced strain (LIS - responsible for segregation) on the perovskite framework. Meanwhile, exposing the lattice to TDIS exceeding the LIS can eliminate the photoexcitation-induced strain gradient, as thermal fluctuations of the lattice can mask the LIS strain. Under continuous 0.1 W cm⁻2 illumination (upon segregation), the strain disorder is estimated to be 0.14%, while at 80 °C under dark conditions, the strain is 0.23%. However, in situ heating of the segregated film to 80 °C under continuous illumination (upon reversal) increases the total strain disorder to 0.25%, where TDIS is likely to have a dominant contribution. Therefore, the contribution of entropy to the system's free energy is likely to dominate, respectively. Various temperature-dependent in situ measurements and simulations further support the results. These findings highlight the importance of strain homogenization for designing stable perovskites under real-world operating conditions.

Organizing Uniform Phase Distribution in Methylammonium-Free 1.77 eV Wide-Bandgap Inverted Perovskite Solar Cells.

Disordered crystallization and poor phase stability of mixed halide perovskite films are still the main factors that compromise the performance of inverted wide bandgap (WBG; 1.77 eV) perovskite solar cells (PSCs). Great difficulties are evidenced due to the very different crystallization rates between I- and Br-based perovskite components through DMSO-alone assisted anti-solvent process. Here, a zwitterionic additive strategy is reported for finely regulating the crystal growth of Cs0.2 FA0.8 Pb(I0.6 Br0.4 )3 , thereby obtaining high-performance PSCs. The aminoethanesulfonic acid (AESA) is introduced to form hydrogen bonds and strong PbO bonds with perovskite precursors, realizing the complete coordination with both the organic (FAI) and inorganic (CsI, PbI2 , PbBr2 ) components, balancing their complexation effects, and realizing AESA-guided fast nucleation and retarded crystallization processes. This treatment substantially promotes homogeneous crystal growth of I- and Br-based perovskite components. Besides, this uniformly distributed AESA passivates the defects and inhibits the photo-induced halide segregation effectively. This strategy generates a record efficiency of 19.66%, with a Voc of 1.25 V and FF of 83.7% for an MA-free WBG p-i-n device at 1.77 eV. The unencapsulated devices display impressive humidity stability at 30 ± 5% RH for 1000 h and much improved continuous operation stability at MPP for 300 h.

Chloride-Based Additive Engineering for Efficient and Stable Wide-Bandgap Perovskite Solar Cells.

Metal halide perovskite based tandem solar cells are promising to achieve power conversion efficiency beyond the theoretical limit of their single-junction counterparts. However, overcoming the significant open-circuit voltage deficit present in wide-bandgap perovskite solar cells remains a major hurdle for realizing efficient and stable perovskite tandem cells. Here, a holistic approach to overcoming challenges in 1.8 eV perovskite solar cells is reported by engineering the perovskite crystallization pathway by means of chloride additives. In conjunction with employing a self-assembled monolayer as the hole-transport layer, an open-circuit voltage of 1.25 V and a power conversion efficiency of 17.0% are achieved. The key role of methylammonium chloride addition is elucidated in facilitating the growth of a chloride-rich intermediate phase that directs crystallization of the desired cubic perovskite phase and induces more effective halide homogenization. The as-formed 1.8 eV perovskite demonstrates suppressed halide segregation and improved optoelectronic properties.

Methylammonium Chloride as a Double-Edged Sword for Efficient and Stable Perovskite Solar Cells.

The additive engineering strategy promotes the efficiency of solution-processed perovskite solar cells (PSCs) over 25%. However, compositional heterogeneity and structural disorders occur in perovskite films with the addition of specific additives, making it imperative to understand the detrimental impact of additives on film quality and device performance. In this work, the double-edged sword effects of the methylammonium chloride (MACl) additive on the properties of methylammonium lead mixed-halide perovskite (MAPbI3-x Clx ) films and PSCs are demonstrated. MAPbI3-x Clx films suffer from undesirable morphology transition during annealing, and its impacts on the film quality including morphology, optical properties, structure, and defect evolution are systematically investigated, as well as the power conversion efficiency (PCE) evolution for related PSCs. The FAX (FA = formamidinium, X = I, Br, and Ac) post-treatment strategy is developed to inhibit the morphology transition and suppress defects by compensating for the loss of the organic components, a champion PCE of 21.49% with an impressive open-circuit voltage of 1.17 V is obtained, and remains over 95% of the initial efficiency after storing over 1200 hours. This study elucidates that understanding the additive-induced detrimental effects in halide perovskites is critical to achieve the efficient and stable PSCs.

Temperature-Dependent Reversal of Phase Segregation in Mixed-Halide Perovskites.

Understanding the mechanism of light-induced halide segregation in mixed-halide perovskites is essential for their application in multijunction solar cells. Here, photoluminescence spectroscopy is used to uncover how both increases in temperature and light intensity can counteract the halide segregation process. It is observed that, with increasing temperature, halide segregation in CH3 NH3 Pb(Br0.4 I0.6 )3 first accelerates toward ≈290 K, before slowing down again toward higher temperatures. Such reversal is attributed to the trade-off between the temperature activation of segregation, for example through enhanced ionic migration, and its inhibition by entropic factors. High light intensities meanwhile can also reverse halide segregation; however, this is found to be only a transient process that abates on the time scale of minutes. Overall, these observations pave the way for a more complete model of halide segregation and aid the development of highly efficient and stable perovskite multijunction and concentrator photovoltaics.

Suppressing Halide Segregation in Wide-Band-Gap Mixed-Halide Perovskite Layers through Post-Hot Pressing.

Mixed-halide perovskites (MHPs) have attracted attention as suitable wide-band-gap candidate materials for tandem applications owing to their facile band-gap tuning. However, when smaller bromide ions are incorporated into iodides to tune the band gap, photoinduced halide segregation occurs, which leads to voltage deficit and photoinstability. Here, we propose an original post-hot pressing (PHP) treatment that suppresses halide segregation in MHPs with a band gap of 2.0 eV. The PHP treatment reconstructs open-structured grain boundaries (GBs) as compact GBs through constrained grain growth in the in-plane direction, resulting in the inhibition of defect-mediated ion migration in GBs. The PHP-treated wide-band-gap (2.0 eV) MHP solar cells showed a high efficiency of over 11%, achieving an open-circuit voltage (Voc) of 1.35 V and improving the maintenance of the initial efficiency under the working condition at AM 1.5G. The results reveal that the management of GBs is necessary to secure the stability of wide-band-gap MHP devices in terms of halide segregation.

Engineered Surface Halide Defects by Two-Dimensional Perovskite Passivation for Deformable Intelligent Photodetectors.

As attractive photoactive materials, metal halide perovskites demonstrate outstanding performance in a wide range of optoelectronic applications. Among the various compositions studied, mixed-halide perovskites have a finely tunable band gap that renders them desirable for targeted applications. Despite their advantages, photoinduced halide segregation often deters the photoelectric stability of the materials. Herein, we adopt a strategy of post-treating the perovskite surface with an organic spacer to generate a two-dimensional (2D) perovskite passivating layer. Trap-assisted recombination pathways can be selectively modulated by passivating the surface halide defects that cause photoinduced halide segregation. Fluorescence lifetime imaging of flat and bent surfaces of perovskites reveals that the perovskite lattice tolerates mechanical strain via the neutralizing passivation of ionic halide defects. Upon bending, the photocurrent response of the flexible photodetector is maintained over 83% for 2D passivated perovskite and drops to 23% for pristine perovskite. A flexible photodetector array built with 2D passivated perovskite, in combination with a deep learning algorithm, demonstrates excellent accuracy in determining letters of the alphabet for both flat (>96%) and bent (>93%) states. The connection of chemically modified charge carrier dynamics and mechanical properties revealed in this study offers valuable guidance for developing next-generation optoelectronic applications.

Steric Engineering Enables Efficient and Photostable Wide-Bandgap Perovskites for All-Perovskite Tandem Solar Cells.

Wide-bandgap (WBG, ≈1.8 eV) perovskite is a crucial component to pair with narrow-bandgap perovskite in low-cost monolithic all-perovskite tandem solar cells. However, the stability and efficiency of WBG perovskite solar cells (PSCs) are constrained by the light-induced halide segregation and by the large photovoltage deficit. Here, a steric engineering to obtain high-quality and photostable WBG perovskites (≈1.8 eV) suitable for all-perovskite tandems is reported. By alloying dimethylammonium and chloride into the mixed-cation mixed-halide perovskites, wide bandgaps are obtained with much lower bromide contents while the lattice strain and trap densities are simultaneously minimized. The WBG PSCs exhibit considerably improved performance and photostability, retaining >90% of their initial efficiencies after 1000 h of operation at maximum power point. With the triple-cation/triple-halide WBG perovskites enabled by steric engineering, a stabilized power conversion efficiency of 26.0% in all-perovskite tandem solar cells is further obtained. The strategy provides an avenue to fabricate efficient and stable WBG subcells for multijunction photovoltaic devices.

Structural Dynamics of Metal Halide Perovskites during Photoinduced Halide Segregation.

Despite substantial research effort, photoinduced halide segregation in mixed halide perovskites continues to limit the available perovskite chemistries for use in optoelectronic applications. In this study, we present new insights into halide-segregation process through in situ X-ray diffraction measurements that reveal substantial structural changes in mixed-halide perovskites under excitation. We observe that photoinduced halide segregation leads to the formation of one iodide-rich and one bromide-rich perovskite composition whose Br:I ratios are the same (at 20 and 93% bromine, respectively), for a range of compositions of the pristine initial perovskite phase. This segregation reverses in the dark to re-form a mixed halide perovskite with the same lattice spacing as the pristine perovskite. From these results, we determine a kinetic rate for the formation and dissolution of these new crystalline phases and observe that the crystalline orientation is preserved through the light-segregation and dark-relaxation processes. Our results are consistent with a model of halide segregation where excitation causes changes in the free energy of mixing and ultimately the formation of a miscibility gap in the MAPb(IxBr1-x)3 phase diagram and should inform future works to model and manipulate the halide-segregation process in mixed-halide perovskites.

Photoinduced Halide Segregation in Ruddlesden-Popper 2D Mixed Halide Perovskite Films.

2D lead halide perovskites, which exhibit bandgap tunability and increased chemical stability, have been found to be useful for designing optoelectronic devices. Reducing dimensionality with decreasing number of layers (n = 10-1) also imparts resistance to light-induced ion migration as seen from the halide ion segregation and dark recovery in mixed halide (Br:I = 50:50) perovskite films. The light-induced halide ion segregation efficiency, as determined from difference absorbance spectra, decreases from 20% to <1% as the dimensionality is decreased for 2D perovskite film from n = 10 to 1. The segregation rate constant (ksegregation ), which decreases from 5.9 × 10-3  s-1 (n = 10) to 3.6 × 10-4  s-1 (n = 1), correlates well with nearly an order of magnitude decrease observed in charge-carrier lifetime (τaverage  = 233 ps for n = 10 vs τavg  = 27 ps for n = 1). The tightly bound excitons in 2D perovskites make charge separation less probable, which in turn decreases the halide mobility and resulting phase segregation. The importance of controlling the dimensionality of the 2D architecture in suppressing halide ion mobility is discussed.

Dual Interfacial Design for Efficient CsPbI2 Br Perovskite Solar Cells with Improved Photostability.

A synergic interface design is demonstrated for photostable inorganic mixed-halide perovskite solar cells (PVSCs) by applying an amino-functionalized polymer (PN4N) as cathode interlayer and a dopant-free hole-transporting polymer poly[5,5'-bis(2-butyloctyl)-(2,2'-bithiophene)-4,4'-dicarboxylate-alt-5,5'-2,2'-bithiophene] (PDCBT) as anode interlayer. First, the interfacial dipole formed at the cathode interface reduces the workfunction of SnO2 , while PDCBT with deeper-lying highest occupied molecular orbital (HOMO) level provides a better energy-level matching at the anode, leading to a significant enhancement in open-circuit voltage (Voc ) of the PVSCs. Second, the PN4N layer can also tune the surface wetting property to promote the growth of high-quality all-inorganic perovskite films with larger grain size and higher crystallinity. Most importantly, both theoretical and experimental results reveal that PN4N and PDCBT can interact strongly with the perovskite crystal, which effectively passivates the electronic surface trap states and suppresses the photoinduced halide segregation of CsPbI2 Br films. Therefore, the optimized CsPbI2 Br PVSCs exhibit reduced interfacial recombination with efficiency over 16%, which is one of the highest efficiencies reported for all-inorganic PVSCs. A high photostability with a less than 10% efficiency drop is demonstrated for the CsPbI2 Br PVSCs with dual interfacial modifications under continuous 1 sun equivalent illumination for 400 h.