Binding mechanism and structural characteristics of alloyed protein complex for enhanced solubility of hemp seed protein isolate.

Despite the numerous health benefits and high digestibility of hemp seed protein isolate (HPI), its low solubility at neutral pH limits its utilization in the food industry. Therefore, we subjected insoluble HPI and soluble mung bean protein isolate (MBPI) to pH co-shifting under extremely alkaline conditions to form an alloyed protein complex (A-HM). At a mass ratio of HPI:MBPI of 50:50, A-HM exhibited the highest solubility (95.30 ± 0.99 %), and also had high resistance to heat treatment. Native PAGE demonstrated the formation of alloyed protein complexes, and particle size analysis revealed that A-HM exhibited small particle sizes and dispersion in water without aggregation of HPI. Owing to their small size, numerous hydrophobic residues and aromatic ring of HPI were exposed on the surface. Hydrophobic interactions predominantly governed the binding force involved in the formation of A-HM. Our findings may enhance HPI applications in the food industry, particularly in plant-based beverages.

Mechanical Characterization of Flax and Hemp Fibers Cultivated in Romania.

This study examines the mechanical properties, specifically strength and stiffness, of technical hemp and flax fibers grown in Romania. Tensile testing was employed to determine stress-strain curves and the Young's modulus and to assess the failure strength of both fiber types. Although samples of various lengths were tested, no significant length-dependent variations were observed. However, a strong dependence on fiber diameter was noted, with the smallest diameters approaching the documented strength of elementary fibers. Due to the considerable variability in the experimental results pertaining to the characteristics of the reinforced fibers, a statistical analysis using a two-parameter Weibull distribution was employed. The analysis revealed three distinct stress-strain curve profiles, i.e., linear, bi-linear, and tri-linear patterns, with the average ultimate stress ranging from 412 to 566 MPa for hemp and 502 to 598 MPa for flax.

Innovative Hemp Shive-Based Bio-Composites: Part I: Modification of Potato Starch Binder by Sodium Meta-Silicate and Glycerol.

The growing demand for sustainable building materials has boosted research on plant-based composite materials, including hemp shives bound with biodegradable binders. This study investigates the enhancement of potato-starch-based binders with sodium metasilicate and glycerol to produce eco-friendly bio-composites incorporating hemp shives. Potato starch, while renewable, often results in suboptimal mechanical properties and durability in its unmodified form. The addition of sodium metasilicate is known to improve the mechanical strength and thermal stability of starch-based materials, while glycerol acts as a plasticizer, potentially enhancing flexibility and workability. Bio-composites were produced with varying concentrations of sodium metasilicate (0-107% by mass of starch) and glycerol (0-133% by mass of starch), and their properties were evaluated through thermal analysis, density measurements, water absorption tests, compressive strength assessments, and thermal conductivity evaluations. The results demonstrate that sodium metasilicate significantly increases the bulk density, water resistance, and compressive strength of the bio-composites, with enhancements up to 19.3% in density and up to 2.3 times in compressive strength. Glycerol further improves flexibility and workability, though excessive amounts can reduce compressive strength. The combination of sodium metasilicate and glycerol provides optimal performance, achieving the best results with an 80% sodium metasilicate and 33% glycerol mixture by weight of starch. These modified bio-composites offer promising alternatives t2 o conventional building materials with improved mechanical properties and environmental benefits, making them suitable for sustainable construction applications.

Eco-friendly encapsulation: Investigating plant-based protein-alginate shells for efficient delivery and digestion of hemp seed oil encapsulated via supercritical CO2 dispersion.

In this study, supercritical carbon dioxide solution-enhanced dispersion (SEDS) was used to encapsulate hemp seed oil (HSO) within matrices of hemp seed protein isolate (HPI), pea protein (PPI) and soy protein (SPI) (0.5 % w/v) in complex with alginate (AL) (0.01 % w/v). The effects of different pH levels (3-9), NaCl concentrations (0-200 mmol/L) and simulated gastrointestinal conditions on HSO release and digestion patterns were analyzed. The findings revealed that SPI/AL microcapsules effectively maintained structural integrity and controlled oil release across diverse pH levels and salt concentrations. During gastrointestinal phases, minimal oil release was observed during oral digestion (<25 % for all samples), while significant (P < 0.05) gastric release occurred in PPI/AL (55.4 %) and SPI/AL (78.1 %) microcapsules. Surprisingly, HPI/AL microcapsules exhibited delayed and sustained release (27.9 %), indicating their potential as ideal wall material for delivering sensitive food and pharmaceutical ingredients to the intestinal stage while minimizing damage in the harsh gastric environment.

Assessment of the effects of cannabidiol and a CBD-rich hemp extract in Caenorhabditis elegans.

Consumer use of cannabidiol (CBD) is growing, but there are still data gaps regarding its possible adverse effects on reproduction and development. Multiple pathways and signaling cascades involved in organismal development and neuronal function, including endocannabinoid synthesis and signaling systems, are well conserved across phyla, suggesting that Caenorhabditis elegans can model the in vivo effects of exogenous cannabinoids. The effects in C. elegans on oxidative stress response (OxStrR), developmental timing, juvenile and adult spontaneous locomotor activity, reproductive output, and organismal CBD concentrations were assessed after exposure to purified CBD or a hemp extract suspended in 0.5% sesame oil emulsions. In C. elegans, this emulsion vehicle is equivalent to a high-fat diet (HFD). As in mammals, HFD was associated with oxidative-stress-related gene expression in C. elegans adults. CBD reduced HFD-induced OxStrR in transgenic adults and counteracted the hypoactivity observed in HFD-exposed wild-type adults. In C. elegans exposed to CBD from the onset of feeding, delays in later milestone acquisition were irreversible, while later juvenile locomotor activity effects were reversible after the removal of CBD exposure. CBD-induced reductions in mean juvenile population body size were cumulative when chronic exposures were initiated at parental reproductive maturity. Purified CBD was slightly more toxic than matched concentrations of CBD in hemp extract for all tested endpoints, and both were more toxic to juveniles than to adults. Dosimetry indicated that all adverse effect levels observed in C. elegans far exceeded recommended CBD dosages for humans.

Insights into terpenes profiling and transcriptional analyses during flowering of different Cannabis sativa L. chemotypes.

Terpenes, volatile compounds known for their aromatic and therapeutic properties, play a pivotal role in shaping the overall chemical profile of Cannabis sativa L. Their biosynthesis in planta occurs in trichomes and involves the 2-C-methyl-D-erythritol 4-phosphate (MEP) and the mevalonic acid (MVA) pathways, responsible for producing the substrates utilized by a family of enzymes, the terpene synthases (TPS), for terpene production. In this work, a comprehensive approach combining chemical analyses of the volatile compounds characterizing the aroma of the inflorescences three C. sativa genotypes collected at three stages of maturity and the transcriptional analyses of key genes involved in the terpene biosynthesis was adopted to study this pathway. The results revealed different terpene profiles among genotypes, which were characterized by peculiar compounds belonging to the sesqui- (CINBOL and Fibrante) or monoterpene (Ermo) categories. Both structural and putative regulatory genes were analysed by RT-qPCR, revealing distinct transcriptional profiles of Terpene Synthases, contributing to the diversity of mono and sesquiterpenes synthesized. Furthermore, the research delved into potential regulatory genes associated with trichome formation, a crucial factor influencing terpene accumulation. This integrated approach highlighted complex mechanisms governing terpene accumulation in cannabis, while also offering potential regulators putatively involved in this pathway.

Genome-wide identification of cannabinoid biosynthesis genes in non-drug type Cannabis (Cannabis sativa L.) cultivar.

BACKGROUND: Cannabis sativa cultivars can be classified as marijuana or hemp, depending on its amount of the psychoactive cannabinoid Δ9-tetrahydrocannabinolic acid (THCA). Hemp Cheungsam is a non-drug type Cannabis sativa that is characterized by low THCA content. However, the transcripts and expression profile of cannabinoid biosynthesis pathway genes of hemp Cheungsam have not been investigated. METHODS: RNA-sequencing (RNA-seq) was performed on three different tissue types (flower, leaf, and stem) of hemp Cheungsam to understand their transcriptomes. The expression of cannabinoid biosynthesis pathway genes was further analyzed in each tissue type. Multiple sequence alignment and conserved domain analyses were used to investigate the homologs of cannbinoid biosynthesis genes. RESULTS: We found that the cannabinoid biosynthesis pathway was mainly expressed in the flowers of hemp Cheungsam, similar to other Cannabis cultivars. However, expression of cannabidiolic acid (CBDA) synthase was much higher than THCA synthase and cannabichromenic acid (CBCA) synthase, suggesting that the transcription profile favors CBDA biosynthesis. Sequence analysis of cannabinoid biosynthesis pathway genes suggested the identity of orthologs in hemp Cheungsam. CONCLUSIONS: Cannabinoid biosynthesis in hemp Cheungsam mostly occurs in the flowers, compared to other plant organs. While CBDA synthase expression is high, THCA and CBCA synthase expression is considerably low, indicating lesser THCA biosynthesis and thus low THCA content. Sequence analysis of key genes (CBDA, THCA, and CBCA synthases) of the cannabinoid biosynthetic pathway indicates that orthologs are present in hemp Cheungsam.

Sink strength, nutrient allocation, cannabinoid yield and associated transcript profiles vary in two drug-type Cannabis chemovars.

Cannabis sativa L. is one of the oldest domesticated crops. Hemp-type cultivars, which predominantly produce non-intoxicating cannabidiol (CBD), have been selected for their fast growth, seed, and fibre production, while drug-type chemovars were bred for high accumulation of tetrahydrocannabinol (THC). We investigated how the generation of CBD-dominant chemovars by introgression of hemp- into drug-type Cannabis impacted plant performance. The THC-dominant chemovar showed superior sink strength, higher flower biomass and demand-driven control of nutrient uptake. By contrast, the CBD-dominant chemovar hyperaccumulated phosphate in sink organs leading to reduced carbon and nitrogen assimilation in leaves, which limited flower biomass and cannabinoid yield. RNA-seq analyses determined organ- and chemovar-specific differences in expression of genes associated with nitrate and phosphate homeostasis as well as growth-regulating transcription factors that were correlated with measured traits. Among these were genes positively selected for during Cannabis domestication encoding an inhibitor of the phosphate starvation response SPX DOMAIN GENE3, nitrate reductase and two nitrate transporters. Altered nutrient sensing, acquisition or distribution are likely a consequence of adaption to growth on marginal, low-nutrient input lands in hemp. Our data provide evidence that such ancestral traits may become detrimental for female flower development and consequently overall CBD yield in protected cropping environments.

A novel technology for rapid identification of hemp fibers by terahertz spectroscopy.

A novel method for the rapid identification of hemp fibers is proposed in this paper, utilizing terahertz time-domain spectroscopy (THz-TDS) combined with the LargeVis (LV) dimensionality reduction technique. This approach takes advantage of the strengths of THz-TDS while enhancing classification accuracy through LV. To verify the efficacy of this method, terahertz absorption spectral data from three types of hemp fibers were processed. The THz absorption spectra were initially preprocessed using Hanning filtering. Following this, the filtered data underwent dimensionality reduction through three distinct methods: linear Principal Component Analysis (PCA), nonlinear t-Distributed Stochastic Neighbor Embedding (t-SNE), and the LV method. This sequence of steps resulted in a two-dimensional feature data matrix derived from the THz source spectral data. The resultant feature data matrices were then input into both K-Nearest Neighbors (KNN) and Decision Tree (DT) classifiers for analysis. The classification accuracies of six models were evaluated, revealing that the LV-KNN model achieved a 86.67% accuracy rate for the three hemp fiber types. Impressively, the LV-DT model achieved a perfect 100.00% accuracy rate for the same fibers. The LV-DT model, when integrated with THz spectroscopy technology, offers a quick and precise method for identifying various types of hemp fibers. This development introduces an innovative optical measurement scheme for the characterization of textile materials.

Ultrasonic-assisted synthesis for the production of green and sustainable hemp carboxymethyl cellulose.

Hemp fiber (Cannabis sativa) is being widely used to produce carboxymethyl cellulose (CMC). This study focused on synthesizing carboxymethyl cellulose from bleached hemp fiber to investigate the impact of different factors, i.e., chemical concentration and synthesis time, on its characteristics. The fiber morphology analysis revealed desirable properties, which are essential for high-quality CMC production. Optimal condition for CMC synthesis were investigated, which involved using 20 % NaOH (w/v), the shortest total synthesis time (2.30h), and using 0.9 g MCA (w/w). This resulted in a non-significantly high DS (0.80) in both nonspray-dried and spray-dried hemp carboxymethyl cellulose, representing a high CMC content around 96 %. Moreover, the use of ultrasonic assistance and spray drying techniques significantly improved the hemp carboxymethyl cellulose properties, indicating a decreased molecular weight (2.65 × 104 g/mol) and a decreased particle size (7.82 µm). Thermal analysis revealed that spray-dried hemp carboxymethyl cellulose had lower thermal stability than hemp fiber and nonspray-dried hemp carboxymethyl cellulose. FTIR and 13C NMR analyses confirmed the successful CMC synthesis. Additionally, XRD and SEM analyses demonstrated changes in the crystalline structure and hemp carboxymethyl cellulose surface morphology. This revealed advanced techniques that could enhance hemp carboxymethyl cellulose quality and properties, making it suitable for various industrial applications.

Therapeutic potential of cannabis for surgical wound healing in rats.

This study was conducted to evaluate the wound-healing activities of a Cannabis sativa L. plant extract and cannabidiol on incision wounds. An incision was created and sutured in rats under anaesthesia. Routine wound care procedures were applied for 10 days, followed by histological wound examinations. The cellular bioactivities of the hemp extract and CBD were assessed for MCP-1, EGF, BFGF, IL-8, and COL-1 using ELISA on the rat skin wound healing activity. A one-way ANOVA was used for the data analysis. The EGF values in the plasma were similar in the povidone-iodine, hemp seed oil, and hemp essential oil groups (P > 0.05). However, the EGF levels were lower in the CBD group compared to the other groups (P < 0.001, P < 0.005). The MCP-1 values in the hemp seed oil, hemp essential oil, and CBD were similar (P > 0.05), whereas povidone iodine exhibited lower MCP-1 levels compared to the other groups (P < 0.001, P < 0.005). It was determined that the plasma BFGF, IL-8, and COL 1 values of the groups were similar (P > 0.05). To our knowledge, this study is the first to evaluate the effects of CBD, seed oil, and hemp leaf extract on incision wound healing. It demonstrates that hemp extract holds greater potential benefits for wound healing compared to CBD.

Hemp Seed (Cannabis sativa L.) Varieties: Lipids Profile and Antioxidant Capacity for Monogastric Nutrition.

The present research aimed to study the proximate composition, fatty acid profile, antiox-idant activity, total phenolic and N-trans-Caffeoyltyramine content of three distinct varieties of hemp seeds (Carmaenecta, Enectaliana and Enectarol, grown in a Mediterranean area (Central Italy), as feed in the diet of farm animals. Proximate composition was determined using the official methods of analyses; the fatty acid profile was determined by gas chromatography, total phenolic content (TPC) and the scavenging activity (DPPH• and ABTS•+) by the colorimetric method, and N-trans-Caffeoyltyramine content by HPLC analysis. The hemp seed Enectarol showed the highest total lipid content and the best antioxidant activity with the highest TPC, N-trans-Caffeoyltyramine content, and ABTS•+, and the lowest peroxidation index and DPPH•; Carmaenecta showed the best fatty acid profile and nutritional indices (atherogenic and thrombogenic indices and hypocholesterolemic/hypercholesterolemic ratio), and Enectaliana showed the highest crude protein and dietary fiber content. The differences observed in the chemical composition, fatty acid profile and antioxidant activity are because of the varieties, considering that all other growing conditions were the same. The results obtained suggest that hemp seed can be used as a source of lipid and protein in animal diets due to their valuable antioxidant activity and as a rich source of essential fatty acids.

Influence of Accelerated Carbonation on the Physico-Mechanical Properties of Natural Fiber-Reinforced Lime Mortars.

Lime mortars are considered the most compatible material for monuments and historic buildings, and they are widely used in restoration works. A key factor determining the mechanical and physical properties of lime mortars is carbonation, which provides strength and hardness. This paper indicates the properties gained in lime mortars produced by Ca(OH)2 and CaO reinforced with different bio-fibers (hemp and lavender) when exposed to the natural environment and in accelerated carbonation. At 90 and 180 days of manufacture, the mechanical and physical properties of the produced composites have been tested. The results show that the carbonation reaction works faster in the case of hot lime mortars, increasing their compressive strength by up to 3.5 times. Hemp-reinforced mortars led to an enhancement in strength by up to 30%, highlighting the significance of bio-fibers in facilitating CO2 diffusion. This was also verified by the thermogravimetric analysis and the determination of the carbon content of the samples. Optimal mechanical properties were observed in mixtures containing quicklime and hemp fibers when conditioned with 3% CO2 at the tested ages.

Physico-Mechanical Characteristics of Gypsum-Fiber Boards Manufactured with Hydrophobically Impregnated Fibers.

Although gypsum-based building materials exhibit many positive characteristics, solutions are still being searched for to reduce the use of gypsum or improve the physico-mechanical properties of board materials. In this study, an attempt was made to produce gypsum boards with hemp fibers. Although hemp fibers can be a specific reinforcement for gypsum-based board materials, they negatively affect the gypsum setting process due to their hygroscopic characteristics. Fibers impregnated with derivatives based on polyvinyl acetate, styrene-acrylic copolymer and pMDI (polymeric diphenylmethane diisocyanate) were used in this study. Gypsum-fiber boards produced with impregnated fibers showed approximately 30% higher mechanical properties as determined by the 3-point bending test. The positive effect of the impregnates on the hemp fibers was confirmed by FTIR (Fourier-transform infrared spectroscopy) and TG/DTA (thermogravimetric analysis/thermal gravimetric analysis) analysis.

Prevalence of Blunt and Hemp Wrap Use Among Young Adults in the United States, 2022.

INTRODUCTION: Blunt and hemp wraps, as a means of consuming cannabis, have emerged into the retail space where the prevalence has been increasing since 2017. There is limited epidemiological research on the prevalence of use of these products across the U.S. particularly among young adults who are at greater risk of tobacco and cannabis use. METHODS: This study draws from a U.S. national representative sample of young adults (n = 1178) captured in May 2022. Respondents participated in an online survey about their use of blunt and hemp wraps. Multinomial regression was used to examine differences in sociodemographic characteristics (gender, race/ethnicity, sexual orientation, educational attainment, and region) in relation to use of each wrap type. RESULTS: One quarter (22.7%) of young adults reported ever having used a blunt wrap, 3.2% in the past 30-days. One in seven (14.3%) had ever used a hemp wrap, 2.3% in the past 30-days. Non-Hispanic Black young adults were 1.55 and 2.91 times as likely to have ever used blunt or hemp wraps, respectively, compared to non-Hispanic Whites. Similarly, participants who identified as gay or lesbian or bisexual similarly had greater odds of having ever used blunt or hemp wraps. Hispanic young adults were 2.49 times as likely to have used hempwraps compared to non-Hispanic Whites. CONCLUSION: Blunt and hemp wrap use is prevalent among young adults, particularly among minoritized populations. Continued research and surveillance of use of these products is needed to fully evaluate the impact their use may have on the broader population.

Exploiting the Properties of Non-Wood Feedstocks to Produce Tailorable Lignin-Containing Cellulose Nanofibers.

Lignin-containing cellulose nanofibrils (LCNFs) are mainly produced commercially from treated wood pulp, which can decrease some of the carbon-negative benefits of utilizing biomass feedstock. In this work, LCNFs are prepared from non-wood feedstocks, including agricultural residues such as hemp, wheat straw, and flax. These feedstocks allowed for the preparation of LCNFs with a variety of properties, including tailored hydrophobicity. The feedstocks and their subsequent LCNFs are extensively characterized to determine the roles that feedstocks play on the morphology and properties of their resultant LCNFs. The LCNFs were then incorporated into paper handsheets to study their usefulness in papermaking applications, which indicated good potential for the use of wheat straw LCNFs as a surface additive to improve the oil resistance coating.

The Influence of Hemp Fibers (Cannabis sativa L.) on the Mechanical Properties of Fiber-Gypsum Boards Reinforcing the Gypsum Matrix.

The modern construction industry is looking for new ecological materials (available, cheap, recyclable) that can successfully replace materials that are not environmentally friendly. Fibers of natural origin are materials that can improve the properties of gypsum composites. This is an important issue because synthetic fibers (hardly biodegradable-glass or polypropylene fibers) are commonly used to reinforce gypsum boards. Increasing the state of knowledge regarding the possibility of replacing synthetic fibers with natural fibers is another step towards creating more environmentally friendly building materials and determining their characteristics. This paper investigates the possibility of manufacturing fiber-gypsum composites based on natural gypsum (building gypsum) and hemp (Cannabis sativa L.) fibers grown in Poland. The effect of introducing hemp fibers of different lengths and with varying proportions of mass (mass of gypsum to mass of fibers) into the gypsum matrix was investigated. The experimental data obtained indicate that adding hemp fibers to the gypsum matrix increases the static bending strength of the composites manufactured. The highest mechanical strength, at 4.19 N/mm2, was observed in fiber-gypsum composites with 4% hemp fiber content at 50 mm in length. A similar trend of increased strength was observed in longitudinal tension. Again, the composite variant with 4% fiber content within the gypsum matrix had the highest mechanical strength. Manufacturing fibers-gypsum composites with more than 4% hemp fiber content negatively affected the composites' strength. Mixing long (50 mm) hemp fibers with the gypsum matrix is technologically problematic, but tests have shown a positive effect on the mechanical properties of the refined composites. The article indicates the length and quantity limitations of hemp fibers on the basis of which fiber-gypsum composites were produced.

Characteristics of Selected Bioactive Compounds and Malting Parameters of Hemp (Cannabis sativa L.) Seeds and Malt.

Hemp (Cannabis sativa L.) seeds are an interesting raw material for malting regarding its relatively high bioactive compounds concentration and proven advantageous properties in different food products and dietary supplements. In the first stage of the study, important seeds properties relevant to the malting process including moisture content, seed viability, and water absorption capacity were determined. However, a few parameters determining the seeds' usability for malt preparation, such as germination ability and water sensitivity, are different in comparison to typical malting raw materials such as barley or wheat. However, they make it possible to obtain high-quality hemp malt. In the next stage of research, spectroscopic and chromatographic analyses, including measurements of antioxidant activity and protein separation by SEC-HPLC, were conducted. The results showed that the malting process improved the total antioxidant potential of hemp seeds by 15%, leading to an increase in the concentration of lower molecular weight proteins and oligopeptides-below molecular mass of 10 kDa-responsible for this high antioxidant activity. The processing of hemp seeds reduced the phytate content while increasing phosphate fractions with fewer phosphate groups, which may have a beneficial effect on nutritional value. These results suggest that malting hemp seeds needs optimalization of the process but can increase its nutritional value as a promising raw material in the food industry.

Novel high internal phase emulsion gels stabilized solely by hemp protein isolate: Enhancement of cannabidiol chemical stability and bioaccessibility.

This study aims to fabricate high internal phase emulsion gels (HIPEGs) using modified hemp protein isolates for microencapsulating cannabidiol (CBD) to enhance their chemical stability and bioaccessibility. Importantly, the combined effect of CBD concentrations (0.1 vs 0.5 wt%) and post gel storage conditions (before-refrigeration (BR) vs after-refrigeration (AR)) on the properties of HIPEGs were investigated. The results showed that the CBD concentration above 0.4 % is necessary to fabricate a stable HIPEG. The rheological properties of HIPEGs were influenced by CBD concentration and refrigeration. The AR gels with 0.5 % CBD showed the highest gel strength (up to 91.7 Pa) and solid-like structures. These properties allowed to HIPEGs maintain good physical stability during storage at 4, 25, and 37 °C for 14 days due to the interconnected polyhedral protein matrices and thick interfacial protein layers. These unique protein architectures offered superior protection against CBD degradation (<2 % of initial added amount) for 100 days during exposure to light and temperature (25 or 37 °C). The INFOGEST digestion results showed the BR gels effectively protected CBD during digestion and consequently improved their stability and bioaccessibility up to 95 % and 74 %, respectively. Overall, the fabricated HIPEGs could be valuable for nutraceutical delivery.

Hemp Protein Isolate-Based Natural Thermal-Reversible Hydrogel as a Novel Wound Dressing Material.

Hydrogels, due to their excellent microstructure and mechanical strength, have become a novel biomaterial in wound dressing. However, plant proteins have never been considered because of their poor original gelling performances and insufficient rheological properties. Here, we reported the fabrication of a plant protein-based thermal-reversible gel using a reverse micelle-extracted hemp protein isolate (HPI). A systematic study was conducted to fully reveal their microstructure, rheological properties, and anti-inflammatory effect to lay a foundation for this newly developed plant protein hydrogel as a potential natural wound dressing. By modulating protein concentration (4% HPI) and temperature (85 °C), a thermal-reversible HPI gel appeared as a filament structure with the major molecular driving force of hydrophobic interactions and hydrogen bonds. By characterizing the rheological properties, lower gel strength and wider linear viscoelastic regime were determined in the thermal-reversible HPI gel compared with a thermal-irreversible HPI gel. Besides, large amplitude oscillatory shear data identified the thermal-reversible gel as a soft gel which demonstrated intracycle strain stiffening and shear thinning behavior. Moreover, the thermal-reversible HPI gel is nontoxic and has benefits in neutrophil growth with injectability and perfect wound coverage. This study opens a novel means to form a natural thermal-reversible hydrogel that can be a new material source for wound dressing.