RESUMO
Developing high-performance and durable catalysts presents a significant challenge for oxidizing toxic inorganic and pharmaceutical compounds in wastewater. Recently, there has been a surge in the development of new heterogeneous catalysts for degrading pharmaceutical compounds, driven by advancements in electrocatalysts and photoelectrocatalysts. In this study, a plasmonic Ag nanoparticles decorated CoFe2O4@TiO2 heteronanostructures have been successfully designed to fabricate a high-performing photoelectrode for the oxidation of pharmaceutical compounds. The developed Ag-CoFe2O4@TiO2 possessed a higher electrochemical stability and effectively harvested the UV to visible and NIR radiation in sunlight which generates the enormous photochemical reactive species that involved in the oxidation of ibuprofen in wastewater. Under direct sunlight irradiation, Ag-CoFe2O4@TiO2 achieved complete oxidation of ibuprofen in wastewater at 0.8 V vs RHE. This indicates that metallic Ag nanoparticles are involved in the charge separation and transport of charge carriers from the photoactive sites of CoFe2O4@TiO2, promoting the generation of abundant hydroxy, oxy, and superoxide radicals that actively break the bonds of ibuprofen. Additionally, oxidation agents such as urea and H2O2 were utilized to enhance the formation of superoxide ions and hydroxyl radicals, which rapidly participate in the oxidation of ibuprofen. Significantly, testing for recyclability confirmed the stability of the Ag-CoFe2O4@TiO2 photoanode, ensuring its suitability for prolonged use in photoelectrochemical advanced oxidation processes. Integrating Ag-CoFe2O4@TiO2 photoanodes into water purification systems could enhance economic feasibility, reduce energy consumption, and improve efficiency.
Assuntos
Antibacterianos , Oxirredução , Prata , Titânio , Águas Residuárias , Poluentes Químicos da Água , Titânio/química , Águas Residuárias/química , Prata/química , Catálise , Poluentes Químicos da Água/química , Antibacterianos/química , Nanopartículas Metálicas/química , Cobalto/química , Processos Fotoquímicos , Ibuprofeno/química , Peróxido de Hidrogênio/química , Eliminação de Resíduos Líquidos/métodos , Técnicas Eletroquímicas/métodos , Compostos Férricos/químicaRESUMO
Considering the importance of physics and chemistry at material interfaces, we have explored the coupling of multinary chalcogenide semiconductor Cu2NiSnS4 nanoparticles (CNTS NPs) for the first time with the noble metal (Au) to form Au-CNTS nano-heterostructures (NHSs). The Au-CNTS NHSs is synthesized by a simple facile hot injection method. Synergistic experimental and theoretical approaches are employed to characterize the structural, optical, and electrical properties of the Au-CNTS NHSs. The absorption spectra demonstrate enhanced and broadened optical absorption in the ultraviolet-visible-near-infrared (UV-Vis-NIR) region, which is corroborated by cyclic voltammetry (CV) readings. CV measurements show type II staggered band alignment, with a conduction band offset (CBO) of 0.21 and 0.23 eV at the Au-CNTS/CdS and CNTS/CdS interface, respectively. Complementary first-principles density functional theory (DFT) calculations predict the formation of a stable Au-CNTS NHSs, with the Au nanoparticle transferring its electrons to the CNTS. Moreover, our interface analysis using ultrafast transient absorption experiments demonstrate that the Au-CNTS NHSs facilitates efficient transport and separation of photoexcited charge carriers when compared to pristine CNTS. The transient measurements further reveal a plasmonic electronic transfer from the Au nanoparticle to CNTS. Our advanced analysis and findings will prompt investigations into new functional materials and their photo/electrocatalysis and optoelectronic device applications in the future.
RESUMO
Nonantibiotic approaches must be developed to kill pathogenic bacteria and ensure that clinicians have a means to treat wounds that are infected by multidrug-resistant bacteria. This study prepared matchstick-like Ag2S-ZnS heteronanostructures (HNSs). Their hydrophobic surfactants were then replaced with hydrophilic poly(ethylene glycol) (PEG) and thioglycolic acid (TGA) through the ligand exchange method, and this was followed by ascorbic acid (AA) conjugation with TGA through esterification, yielding well-dispersed PEGylated Ag2S-ZnS@TGA-AA HNSs. The ZnS component of the HNSs has innate semiconductivity, enabling the generation of electron-hole pairs upon irradiation with a light of wavelength 320 nm. These separate charges can react with oxygen and water around the HNSs to produce reactive oxygen species. Moreover, some holes can oxidize the surface-grafted AA to produce protons, decreasing the local pH and resulting in the corrosion of Ag2S, which releases silver ions. In evaluation tests, the PEGylated Ag2S-ZnS@TGA-AA had synergistic antibacterial ability and inhibited Gram-negative Escherichia coli and Gram-positive methicillin-resistant Staphylococcus aureus (MRSA). Additionally, MRSA-infected wounds treated with a single dose of PEGylated Ag2S-ZnS@TGA-AA HNSs under light exposure healed significantly more quickly than those not treated, a result attributable to the HNSs' excellent antibacterial and Bohr effects.
Assuntos
Staphylococcus aureus Resistente à Meticilina , Infecção dos Ferimentos , Humanos , Antibacterianos/farmacologia , Cicatrização , Polietilenoglicóis/farmacologia , Concentração de Íons de HidrogênioRESUMO
Hardware security is not a new problem but is ever-growing in consumer and medical domains owing to hyperconnectivity. A physical unclonable function (PUF) offers a promising hardware security solution for cryptographic key generation, identification, and authentication. However, electrical PUFs using nanomaterials or two-dimensional (2D) transition metal dichalcogenides (TMDCs) often have limited entropy and parameter space sources, both of which increase the vulnerability to attacks and act as bottlenecks for practical applications. We report an electrical PUF with enhanced entropy as well as parameter space by incorporating 2D TMDC heteronanostructures into field-effect transistors (FETs). Lateral heteronanostructures of 2D molybdenum disulfide and tungsten disulfide serve as a potent entropy source. The variable feature of FETs is further leveraged to enhance the parameter space that provides multiple challenge-response pairs, which are essential for PUFs. This combination results in stably repeatable yet highly variable FET characteristics as alternative electrical PUFs. Comprehensive PUF performance analyses validate the bit uniformity, reproducibility, uniqueness, randomness, false rates, and encoding capacity. The 2D material heteronanostructure-driven electrical PUFs with strong FET-to-FET variability can potentially be augmented as an immediately deployable and scalable security solution for various hardware devices.
RESUMO
The interfacial properties within a composite structure of membranes play a vital role in the separation properties and application performances. Building an interlayer can facilitate the formation of a highly selective layer as well as improve the interfacial properties of the composite membrane. However, it is difficult for a nanomaterial-based interlayer to increase the flux and retention of nanofiltration membranes simultaneously. Here, we report a nanofiltration membrane with a hybrid dimensional titania interlayer that exhibits excellent separation performance. The interlayer, composed of Fe-doped titania nanosheets and titania nanoparticles, helps the formation of an ultrathin (â¼30 nm thick) and defect-free polyamide selective layer with an ideal nanostructure. The hybrid dimensional interlayer endows the membrane with a superior permeability and alleviates flux decline. In addition, the rigid interlayer framework on a PVDF support drastically improves the pressure resistance of nanofiltration membranes and shows negligible flux loss up to 1.5 MPa of pressure.
RESUMO
The avenues of catalysis and material science are always accepted and it is hoped that a state-of-the-art catalyst with exceptional intrinsic redox characteristics would be produced. This study focused on developing a multi-featured catalyst of high economical and commercial standards to meet the multi-directional applications of environmental and energy demands. Manganese (IV) oxide nanosheets made of fluffy-sheet-like g-C3N4 material were successfully synthesized by pyrolysis method. The electron-rich g-C3N4 network and semiconducting metallic oxides of MnO2 nanosheets generated high electron density interfaces within the intra-composite structure. The input of active interfaces along with strong metal-to-support interactions achieved between two parallel nanosheets in MnO2/g-C3N4 catalyst intrinsically boosted up its electrochemical and optical characteristics for it to be used in multi-catalytic fields. Successful trails of catalysts' performance have been made in three major catalytic fields with enhanced activities such as heterogeneous catalysis (reduction of nitrobenzene with rate constant of "K = 0.734 min-1" and hydrogenation of styrene with "100% conversion" efficiency, including negligible change in five consecutive cycles), photocatalysis (degradation of methylene blue dye model within 20 min with negligible change in five consecutive cycles) and electrocatalysis (oxygen reduction reactions having comparable "diffusion-limited-current density" behaviour with that of the commercial Pt/C catalyst). The enhanced performance of catalysts in transforming chemicals, degrading organic pollutant species and producing sustainable energy resources from air oxygen can mitigate the challenges faced in environmental and energy crises, respectively.
Assuntos
Manganês , Óxidos , Catálise , Compostos de Manganês , Azul de MetilenoRESUMO
BACKGROUND: The design of stable and biocompatible black phosphorus-based theranostic agents with high photothermal conversion efficiency and clear mechanism to realize MRI-guided precision photothermal therapy (PTT) is imminent. RESULTS: Herein, black phosphorus nanosheets (BPs) covalently with mono-dispersed and superparamagnetic ferrous selenide (FeSe2) to construct heteronanostructure nanoparticles modified with methoxy poly (Ethylene Glycol) (mPEG-NH2) to obtain good water solubility for MRI-guided photothermal tumor therapy is successfully designed. The mechanism reveals that the enhanced photothermal conversion achieved by BPs-FeSe2-PEG heteronanostructure is attributed to the effective separation of photoinduced carriers. Besides, through the formation of the P-Se bond, the oxidation degree of FeSe2 is weakened. The lone pair electrons on the surface of BPs are occupied, which reduces the exposure of lone pair electrons in air, leading to excellent stability of BPs-FeSe2-PEG. Furthermore, the BPs-FeSe2-PEG heteronanostructure could realize enhanced T2-weighted imaging due to the aggregation of FeSe2 on BPs and the formation of hydrogen bonds, thus providing accurate PTT guidance and generating hyperthermia to inhabit tumor growth under NIR laser with negligible toxicity in vivo. CONCLUSIONS: Collectively, this work offers an opportunity for fabricating BPs-based heteronanostructure nanomaterials that could simultaneously enhance photothermal conversion efficiency and photostability to realize MRI-guided cancer therapy.
Assuntos
Compostos Ferrosos/química , Imageamento por Ressonância Magnética/métodos , Nanopartículas/química , Fósforo/química , Fósforo/farmacologia , Terapia Fototérmica/métodos , Animais , Antineoplásicos/química , Antineoplásicos/farmacologia , Linhagem Celular Tumoral , Feminino , Humanos , Hipertermia Induzida , Camundongos , Nanoestruturas , Fototerapia/métodos , Polietilenoglicóis/química , Medicina de PrecisãoRESUMO
The rational design and development of novel electrode materials with promising nanostructures is an effective technique to improve their supercapacitive performance. This work presents high-performance core/shell electrodes based on three-dimensional hierarchical nanostructures coated with conformal thin transition-metal oxide layers using atomic layer deposition (ALD). This effective interface engineering creates disorder in the electronic structure and coordination environment at the interface of the heteronanostructure, which provides many more reaction sites and rapid ion diffusion. At 3 A g-1, the positive CuCo2O4/Ni4Mo/MoO2@ALD-Co3O4 electrode introduced here exhibits a specific capacity of 1029.1 C g-1, and the fabricated negative Fe3O4@ALD-TiO2 electrode significantly outperforms conventional carbon-based electrodes, with a maximum specific capacity of 372.6 C g-1. The supercapattery cell assembled from these two interface- and surface-tailored electrodes exhibits a very high energy density of 110.4 W h kg-1 with exceptional capacity retention over 20,000 cycles, demonstrating the immense potential of ALD for the next generation of supercapacitors.
RESUMO
To develop excellent photoelectronic and photovoltaic devices, a semiconductor with high photoelectron production efficiency and broad band absorption is urgently required. In this article, novel II-type PbSe/ZnSe hetero-nanobelts with enhanced near-infrared absorption have been synthesized via a facile strategy of a partial cation-exchange reaction and thermal treatment. Derived from ZnSe·0.5N2H4nanobelts as templates, the belt-like morphology was preserved. Due to the mismatch of the crystal type and parameters between PbSe and ZnSe, the formed PbSe in the form of nanoparticles were separated out and decorated on the nanobelts. Furthermore, the composition ratio of Pb/Zn can be tuned through manipulating the adding amount of Pb2+cations, the reaction temperature and time. The ultraviolet-visible-infrared diffuse spectra measurements suggest that the as-prepared PbSe/ZnSe hetero-nanobelts exhibited a broad band absorption from 300 to 1000 nm. In addition, they demonstrated excellent photoresponsivity in the same wavelength region and displayed a peak at approximately 840 nm. Finally, the enhanced photoelectronic sensing mechanism was discussed.
RESUMO
Transition metal dichalcogenides (TMDCs) have recently attracted a tremendous amount of attention owing to their superior optical and electrical properties as well as the interesting and various nanostructures that are created by different synthesis processes. However, the atomic thickness of TMDCs limits the light absorption and results in the weak performance of optoelectronic devices, such as photodetectors. Here, we demonstrate the approach to increase the surface area of TMDCs by a one-step synthesis process of TMDC nanowalls from WOx into three-dimensional (3D) WS2 nanowalls. By utilizing a rapid heating and rapid cooling process, the formation of 3D nanowalls with a height of approximately 150 nm standing perpendicularly on top of the substrate can be achieved. The combination of core-shell colloidal quantum dots (QDs) with three different emission wavelengths and 3D WS2 nanowalls further improves the performance of WS2-based photodetector devices, including a photocurrent enhancement of 320-470% and shorter response time. The significant results of the core-shell QD-WS2 hybrid devices can be contributed by the high nonradiative energy transfer efficiency between core-shell QDs and the nanostructured material, which is caused by the spectral overlap between the emission of core-shell QDs and the absorption of WS2. Besides, outstanding NO2 gas-sensing performance of core-shell QDs/WS2 devices can be achieved with an extremely low detection limit of 50 ppb and a fast response time of 26.8 s because of local p-n junctions generated by p-type 3D WS2 nanowalls and n-type core-shell CdSe-ZnS QDs. Our work successfully reveals the energy transfer phenomenon in core-shell QD-WS2 hybrid devices and shows great potential in commercial multifunctional sensing applications.
RESUMO
MoS2 has emerged as a good application prospect in the electrocatalytic hydrogen evolution reaction (HER). Nevertheless, the catalytic activity of MoS2 is greatly restricted by its inferior electrical conductivity, inadequate exposure of active edge sites, and sluggish water dissociation dynamics. Herein, a 1D/2D heteronanostructure composed of SiC nanowires wrapped with MoS2 nanosheets was prepared via the hydrothermal synthesis of MoS2 on highly connected SiC nanowires (SiCnw). The nanocomposites exhibit an emerging tectorum-like morphology with interface connections of C-Mo bonds, which benefit the efficient interfacial transmission of electrons. Due to the synergetic catalytic effects of MoS2 nanosheets and SiC nanowires, the MoS2/SiCnw nanocomposites possess efficient catalytic performance with a low Tafel slope (55 mV/dec). SiC nanocrystals could reduce the activated water dissociation energy barrier, and the morphologies of connected nanowires could improve the active site exposure and charge transport. The nanocomposites possess favorable hydrogen adsorption free energy from density functional theory (DFT) calculations. The electrocatalytic performance of MoS2/SiCnw nanocomposites could be further improved by assembling the nanocomposites on a carbon fiber paper to enhance the electronic transmission efficiency.
RESUMO
Janus heteronanostructures (HNs), as an important class of anisotropic nanomaterials, could facilitate synergistic coupling of diverse functions inherited by their comprised nanocomponents. Nowadays, synthesizing deterministically targeted Janus HNs remains a challenge. Here, a general yet scalable technique is utilized to fabricate an array of programmable Janus HNs based on anodic aluminum oxide binary-pore templates. By designing and employing an overetching process to partially expose four-edges of one set of nanocomponents in a binary-pore template, selective deposition and interfacing of the other set of nanocomponents is successfully achieved along the exposed four-edges to form a densely packed array of Janus HNs on a large scale. In combination with an upgraded two-step anodization, the synthesis provides high degrees of freedom for both nanocomponents of the Janus HNs, including morphologies, compositions, dimensions, and interfacial junctions. Arrays of TiO2-Au and TiO2/Pt NPs-Au Janus HNs are designed, fabricated, and demonstrated about 2.2 times photocurrent density and 4.6 times H2 evolution rate of that obtained from their TiO2 counterparts. The enhancement was mainly determined as a result of localized surface plasmon resonance induced direct hot electron injection and strong plasmon resonance energy transfer near the interfaces of TiO2 nanotubes and Au nanorods. This study may represent a promising step forward to pursue customized Janus HNs, leading to novel physicochemical effects and device applications.
RESUMO
Molybdenum disulfide (MoS2), as a promising gas-sensing material, has gained intense interest because of its large surface-to-volume ratio, air stability, and various active sites for functionalization. However, MoS2-based gas sensors still suffer from low sensitivity, slow response, and weak recovery at room temperature, especially for NO2. Fabrication of heterostructures may be an effective way to modulate the intrinsic electronic properties of MoS2 nanosheets (NSs), thereby achieving high sensitivity and excellent recovery properties. In this work, we design a novel p-n hetero-nanostructure on MoS2 NSs using interface engineering via a simple wet chemical method. After surface modification with zinc oxide nanoparticles (ZnO NPs), the MoS2/ZnO hetero-nanostructure is endowed with an excellent response (5 ppm nitrogen dioxide, 3050%), which is 11 times greater than that of pure MoS2 NSs. To the best of our knowledge, such a response value is much higher than the response values reported for MoS2 gas sensors. Moreover, the fabricated hetero-nanostructure also improves recoverability to more than 90%, which is rare for room-temperature gas sensors. Our optimal sensor also possesses the characteristics of an ultrafast response time of 40 s, a reliable long-term stability within 10 weeks, an excellent selectivity, and a low detection concentration of 50 ppb. The enhanced sensing performances of the MoS2/ZnO hetero-nanostructure can be ascribed to unique 2D/0D hetero-nanostructures, synergistic effects, and p-n heterojunctions between ZnO NPs and MoS2 NSs. Such achievements of MoS2/ZnO hetero-nanostructure sensors imply that it is possible to use this novel nanostructure in ultrasensitive sensor applications.
RESUMO
Photoelectrochemical (PEC) solar conversion is a green strategy for addressing the energy crisis. In this study, a three-storey nanostructure BiVO4/(RGO/WO3)/W18O49 was fabricated as a PEC photoanode and demonstrated a highly enhanced PEC efficiency. The top and middle storeys are a reduced graphene oxide (RGO) layer and WO3 nanorods (NRs) decorated with BiVO4 nanoparticles (NPs), respectively. The bottom storey is the W18O49 film grown on a pure W substrate. In this novel design, experiments and modeling together demonstrated that the RGO layer and WO3 NRs with a fast carrier mobility can serve as multichannel pathways, sharing and facilitating electron transport from the BiVO4 NPs to the W18O49 film. The high conductivity of W18O49 can further enhance the charge transfer and retard electron-hole recombination, leading to a highly improved PEC efficiency of the BiVO4/WO3 heterojunction. As a result, the as-fabricated three-storey photoanode covered with FeOOH/NiOOH achieves an attractive PEC photocurrent density of 4.66 mA/cm2 at 1.5 V versus Ag/AgCl, which illustrates the promising potential of the three-storey hetero-nanostructure in future photoconversion applications.
RESUMO
The development of highly active electrocatalysts is crucial for the advancement of renewable energy conversion devices. The design of core-shell nanoparticle catalysts represents a promising approach to boost catalytic activity as well as save the use of expensive precious metals. Here, a simple, one-step synthetic route is reported to prepare hexagonal nanosandwich-shaped Ni@Ru core-shell nanoparticles (Ni@Ru HNS), in which Ru shell layers are overgrown in a regioselective manner on the top and bottom, and around the center section of a hexagonal Ni nanoplate core. Notably, the synthesis can be extended to NiCo@Ru core-shell nanoparticles with tunable core compositions (Ni3 Cox @Ru HNS). Core-shell HNS structures show superior electrocatalytic activity for the oxygen evolution reaction (OER) to a commercial RuO2 black catalyst, with their OER activity being dependent on their core compositions. The observed trend in OER activity is correlated to the population of Ru oxide (Ru4+ ) species, which can be modulated by the core compositions.
RESUMO
Bioinspired soft ionic actuators, which exhibit large strain and high durability under low input voltages, are regarded as prospective candidates for future soft electronics. However, due to the intrinsic drawback of weak blocking force, the feasible applications of soft ionic actuators are limited until now. An electroactive artificial muscle electro-chemomechanically reinforced with 3D graphene-carbon nanotube-nickel heteronanostructures (G-CNT-Ni) to improve blocking force and bending deformation of the ionic actuators is demonstrated. The G-CNT-Ni heteronanostructure, which provides an electrically conductive 3D network and sufficient contact area with mobile ions in the polymer electrolyte, is embedded as a nanofiller in both ionic polymer and conductive electrodes of the ionic actuators. An ionic exchangeable composite membrane consisting of Nafion, G-CNT-Ni and ionic liquid (IL) shows improved tensile modulus and strength of up to 166% and 98%, respectively, and increased ionic conductivity of 0.254 S m-1 . The ionic actuator exhibits enhanced actuation performances including three times larger bending deformation, 2.37 times higher blocking force, and 4 h durability. The electroactive artificial muscle electro-chemomechanically reinforced with 3D G-CNT-Ni heteronanostructures offers improvements over current soft ionic actuator technologies and can advance the practical engineering applications.
Assuntos
Órgãos Artificiais , Grafite/química , Dureza/fisiologia , Nanoestruturas/química , Nanotubos de Carbono/química , Níquel/química , Bioengenharia/métodos , Condutividade Elétrica , Eletrodos , Humanos , Íons , Próteses e Implantes , Alicerces Teciduais/química , Torção MecânicaRESUMO
In this study, ZnFe2O4 (ZFO) nanotapers are fabricated on the ZnO nanorods (NRs) by recycling rare-earth oxide (REO) slag as the iron source, which thereby exhibits dramatically enhanced photoelectrochemical (PEC) efficiency. Our studies demonstrate that the electron-hole separation and charge migration can be facilitated by the cascade band alignment of ZFO and ZnO and the branched nanotaper structures. Not only the iron source, the slag particles can also act as the passivation layers, leading to improved electron lifetime and significant PEC enhancement. The current study presents a novel REO-slag-modified PEC anode for high-efficiency PEC devices and offers a possibility of recycling industrial waste for renewable energy generation.
RESUMO
NiO nanocones decorated with ZnO nanothorns on NiO foil substrates are shown to be an ammonia sensor with excellent comprehensive performance, which could, in real-time, detect and monitor NH3 in the surrounding environment. Gas-sensing measurements indicate that assembling nanocones decorated with nanothorns on NiO foil substrate is an effective strategy for simultaneously promoting the stability, reproducibility, and sensitivity of the sensor, because the NiO foil substrate as a whole can quickly and stably transfer electrons between the gas molecules and the sensing materials and the large specific surface area of both nanocones and nanothorns provide good accessibility of the gas molecules to the sensing materials. Moreover, p-type NiO, with majority charge carriers of holes, has higher binding affinity for the electron-donating ammonia, resulting in a significant increase in selectivity toward NH3 over other organic gases. Compared with the NiO nanowires and pure NiO nanocones, the heterogeneous NiO nanocones/ZnO nanothorns exhibit less dependence on the temperature and humidity in response/recovery speed and sensitivity of sensing NH3. Our investigation indicates that two factors are responsible for reducing the dependence on the gas sensing characteristics under various environmental conditions. One is that the n-type ZnO nanothorns growing on the surface of nanocones, with majority charge carriers of electrons, speed up adsorption and desorption of gas molecules. The other is that the abundant cone-shaped and thornlike superstructures on the substrate are favorable for constructing a hydrophobic surface, which prevents the gas sensing material from being wetted.
RESUMO
Nanorods of triniobium hydroxide heptaoxide, Nb3 O7 (OH), were synthesized by means of a hydrothermal method. Subsequently, Pt and CuO nanoparticles were introduced on the surface of Nb3 O7 (OH) nanorods by a microwave-assisted solvothermal nucleation and growth technique. The resulting Pt- and CuO-decorated Nb3 O7 (OH) nanorods demonstrated uniform particle dispersion and were fully characterized by X-ray diffraction, electron microscopy, and spectroscopic analysis. Furthermore, the solar-powered photocatalytic hydrogen production properties of these heteronanostructures were studied. The solar-driven H2 formation rate over Pt-Nb3 O7 (OH) was determined to be 710.4 ± 1.7 µmol g(-1) h(-1) with a quantum efficiency of Ï=5.40% at λ=380 nm. Interestingly, the as-prepared CuO-Nb3 O7 (OH) heteronanostructure was found to be inactive under solar irradiation during an induction phase, whereupon it undergoes an in situ photoreduction process to form the photocatalytically active Cu-Nb3 O7 (OH). This restructuring process was monitored by an in situ measurement of the time-evolution of the optical absorption spectra. The solar-powered H2 production for the restructured compound was determined to be 290.3 ± 5.1 µmol g(-1) h(-1) .
Assuntos
Cobre/química , Hidrogênio/química , Nanotubos/química , Nióbio/química , Óxidos/química , Processos Fotoquímicos , Compostos de Platina/química , CatáliseRESUMO
Composite heteronanostructures hold promise for high photocatalytic efficiency for water splitting and the degradation of organic pollutants. However, their photocatalytic activity under broadband excitation has been challenging, until now.