RESUMO
The development of environmentally friendly technology is vital to effectively address the issues related to environmental deterioration. This work integrates ZnO-decorated MoS2 (MZ) to create a high-performing PVDF-based PVDF/MoS2-ZnO (PMZ) hybrid polymer composite film for sonocatalytic organic pollutant degradation. An efficient synergistic combination of MZ was identified by altering the ratio, and its influence on PVDF was assessed using diverse structural, morphological, and sonocatalytic performances. The PMZ film demonstrated very effective sonocatalytic characteristics by degrading rhodamine B (RhB) dye with a degradation efficiency of 97.23%, whereas PVDF only degraded 17.7%. Combining MoS2 and ZnO reduces electron-hole recombination and increases the sonocatalytic degradation performance. Moreover, an ideal piezoelectric PVDF polymer with MZ enhances polarization to improve redox processes and dye degradation, ultimately increasing the degradation efficiency. The degradation efficiency of RhB was seen to decrease while employing isopropanol (IPA) and p-benzoquinone (BQ) due to the presence of reactive oxygen species. This suggests that the active species â¢O2- and â¢OH are primarily responsible for the degradation of RhB utilizing PMZ2 film. The PMZ film exhibited improved reusability without substantially decreasing its catalytic activity. The superior embellishment of ZnO onto MoS2 and effective integration of MZ into the PVDF polymer film results in improved degrading performance.
RESUMO
Photoluminescent materials are widely used for information storage and anticounterfeiting, while most of them have the disadvantages of static information performance and weak processability, which is still a challenging task in developing dynamic anticounterfeiting materials with high security levels. Herein, we fabricated a novel photostimuli-responsive dual-emitting luminescent material UPTES-SPn-Tb-hfa, which was obtained by introducing the photochromic molecule spiropyran (SP) and lanthanide complex (Tb-hfa) into a siloxane-polyether matrix using the sol-gel process. Due to the conformation-dependent photochromic fluorescence resonance energy transfer between the Tb-hfa donor and SP acceptor, the ring-closing (SP)/ring-opening (MC) isomerization of the SP unit leads to a reversible luminescence switching in UPTES-SPn-Tb-hfa. This composite material has great potential for advanced anticounterfeiting because of the advantage of rapidly repeatable encryption/decryption for at least 8 times and dynamic luminescent colors within 15 s. In addition, due to its two luminescent centers (Tb3+ and MC), the luminescent color of this material can be regulated by 254 and 365 nm UV-light irradiation, which facilitates the design of multicolored anticounterfeiting labels. Our work presents a novel design methodology to fabricate dynamic anticounterfeiting materials, significantly enhancing the security of anticounterfeiting applications.
RESUMO
Free-standing films without the need for any support materials attract attention because of their excellent flexibility in use and ability to be transferred to various substrates. However, free-standing films containing large amounts of inorganic crystalline particles are hard to achieve due to their low strength. In this study, we found the possibility of preparing a free-standing composite film of CuS/polyvinylpyrrolidone (PVP) at a large loading of CuS (>50%) from a concentrated colloidal dispersion of CuS nanoparticles modified with PVP. Despite the large amount of inorganic crystals contained in the free-standing film, the film was strong enough to be handled without any support materials. As a proof-of-concept application of the free-standing film, a solar water evaporation experiment was performed. The CuS/PVP free-standing film exhibited photothermal conversion under light illumination to generate heat and accelerate water evaporation, achieving an evaporation rate of 4.35 kg·m-2 h-1 and an evaporation efficiency of 96.3% at a power density of 3 suns. In addition, thanks to the free-standing feature, one side of the CuS/PVP film could be hydrophobized with polydimethylsiloxane to form a Janus thin film, allowing for floating on the water surface. As a result, effective water evaporation was achieved because of the selective evaporation of water from the air/water interface.
RESUMO
Strong, tough and sustainable materials are in high demand in various engineering applications. We demonstrate a potential sustainable hybrid film made from natural cellulose and a biobased slurry. Through a simple and scalable approach, cellulose can be processed into an advanced material with over 2.8 and 9.2-fold increase in dry strength and toughness after curing and a 728-fold increase in wet strength, respectively. In addition, these hybrid composite films display an outstanding antioxidant activity surpassing 90 %, along with excellent ultraviolet radiation shielding and thermal insulation properties. Further, the hybrid films can be fabricated by integrating all-natural materials and still guarantee their unique functionality. We also demonstrate the feasibility of a circular bioeconomy by recycling the hybrid film using a green, deep eutectic solvent to fabricate a recycled hybrid film that displays excellent mechanical and optical properties. When recycling is unsuitable or economical, the hybrid film can naturally degrade in the soil under 6 months. These encouraging findings suggest the promise of cellulose hybrid films as a renewable, low-cost, tough, and strong material with the potential to replace nonrenewable synthetic plastics and products.
Assuntos
Celulose , Raios Ultravioleta , Materiais Dentários , Engenharia , PlásticosRESUMO
In the present work, we have investigated an organic semiconductor based on tris(8-hydroxyquinoline) aluminum (AlQ3) doped with tetracyanoquinodimethane (TCNQ), which can be used as an organic photoconductor. DFT calculations were carried out to optimize the structure of semiconductor species and to obtain related constants in order to compare experimental and theoretical results. Subsequently, AlQ3-TCNQ films with polypyrrole (Ppy) matrix were fabricated, and they were morphologically and mechanically characterized by Scanning Electron Microscopy, X-ray diffraction and Atomic Force Microscopy techniques. The maximum stress for the film is 8.66 MPa, and the Knoop hardness is 0.0311. The optical behavior of the film was also analyzed, and the optical properties were found to exhibit two indirect transitions at 2.58 and 3.06 eV. Additionally, photoluminescence measurements were carried out and the film showed an intense visible emission in the visible region. Finally, a photoconductor was fabricated and electrically characterized. Applying a cubic spline approximation to fit cubic polynomials to the J-V curves, the ohmic to SCLC transition voltage VON and the trap-filled-limit voltage VTFL for the device were obtained. Then, the free carrier density and trap density for the device were approximated to n0=4.4586×10191m3 and Nt=3.1333×10311m3, respectively.
RESUMO
In this study, we assessed the electrical and optical behavior of semiconductor hybrid films fabricated from octaethyl-21H,23H-porphine copper (CuP), embedded in polymethylmethacrylate (PMMA), and polystyrene (PS). The hybrid films were characterized structurally and morphologically using infrared spectroscopy (IR), atomic force microscopy (AFM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). Subsequently, the PMMA:CuP and PS:CuP hybrid films were evaluated optically by UV-vis spectroscopy, as well as electrically, with the four-point collinear method. Hybrid films present a homogeneous and low roughness morphology. In addition, the PS matrix allows the crystallization of the porphin, while PMMA promotes the amorphous structure in CuP. The polymeric matrix also affects the optical behavior of the films, since the smallest optical gap (2.16 eV) and onset gap (1.89 eV), and the highest transparency are obtained in the film with a PMMA matrix. Finally, the electrical behavior in hybrid films is also affected by the matrix: the largest amount of current carried is approximately 0.01 A for the PS:CuP film, and 0.0015 A for the PMMA:CuP film. Thanks to the above properties, hybrid films are promising candidates for use in optoelectronic devices.
RESUMO
The exceptional properties of two-dimensional covalent organic framework materials (2D-COFs), including their large π-conjugated structure at the molecular level and π-π multilayer stacking, have attracted interest for soft photothermal actuator applications. However, the conventional synthesis of COFs as microcrystalline powders limits their processing in water due to their limited dispersibility. Herein, we present a simple and environmentally friendly method to fabricate water-suspended COF inks by adjusting the surface potential of COF powders through adsorption of ionic species such as Na+ and Cl-. This technique effectively prevents the accumulation and aggregation of COF powder, resulting in an aqueous COF ink that can be easily cast into homogeneous hybrid COF films by Mayer-rod coating. In addition, the resulting photothermal actuator exhibited a fast response time within 3 s at a curvature of 2.35 cm-1 in the near-infrared light. This facile and practical approach to fabricating water-based COFs ink represents a promising strategy for the development of practical applications of COFs in photothermal actuators.
RESUMO
Silicon-based materials are of long-standing interest as the anodes for next-generation lithium-ion batteries, yet their low initial Coulombic efficiency and poor interfacial stability are lethal limitations. In this work, we used atomic layer deposition (ALD) and molecular layer deposition (MLD) techniques to fabricate a lithium-containing laminated Li2O-lithicone hybrid film (â¼5 nm) on a silicon electrode. The laminated film provides an additional surface Li source around silicon cores, which can partially reimburse the Li loss during battery cycling. Characterization of interfacial components shows that such a laminated Li2O-lithicone interface undergoes gentle element changes and participates in a hybrid solid electrolyte interphase with Li2CO3, Li2O, LixPOFy, and LiF species. Finite element model analysis and morphology characterization demonstrate that the laminated structure design can help relieve the interfacial stress and thus retain the integrity and reactivity of the silicon composite anode during cycling. Moreover, the lithium-based laminated film leads to a fast Li+ migration kinetics on the surface of the electrode as revealed by the galvanostatic intermittent titration technique and density functional theory calculation. Benefiting from the above merits, a silicon anode with a 91.2% initial Coulombic efficiency, a rate performance of 1460 mA h g-1 at 2 A g-1, and a reversible capacity over 646 mA h g-1 after 850 cycles was achieved. This work exemplifies the advantages of lithium-based hybrid films precisely engineered by ALD/MLD techniques for improving performances of advanced silicon anode batteries and deepens understandings on the mechanism of interfacial stability and reaction kinetics.
RESUMO
Hybrid films for applications in organic electronics from NiFe2O4 nanoparticles (NPs) in poly(3,4 ethylene dioxythiophene), poly(4-styrenesulfonate) (PEDOT:PSS), and poly(methyl methacrylate) (PMMA) were fabricated by the spin-coating technique. The films were characterized by infrared spectroscopy, atomic force microscopy, scanning electron microscopy, and energy-dispersive spectroscopy to subsequently determine their optical parameters. The electronic transport of the hybrid films was determined in bulk heterojunction devices. The presence of NiFe2O4 NPs reinforces mechanical properties and increases transmittance in the hybrid films; the PEDOT:PSS-NiFe2O4 NPs film is the one that has a maximum stress of 28 MPa and a Knoop hardness of 0.103, while the PMMA-NiFe2O4 NPs film has the highest transmittance of (87%). The Tauc band gap is in the range of 3.78-3.9 eV, and the Urbach energy is in the range of 0.24-0.33 eV. Regarding electrical behavior, the main effect is exerted by the matrix, although the current carried is of the same order of magnitude for the two devices: glass/ITO/polymer-NiFe2O4 NPs/Ag. NiFe2O4 NPs enhance the mechanical, optical, and electrical behavior of the hybrid films and can be used as semi-transparent anodes and as active layers.
RESUMO
The synthesis of four pentacoordinated organotin(IV) complexes prepared in a one-pot reaction from 2-hydroxy-1-naphthaldehyde, 2-amino-3-hydroxypyridine and organotin oxides is reported. The complexes were characterized by UV-Vis, IR, MS, 1H, 13C and 119Sn NMR techniques. The compound based on 2,2-diphenyl-6-aza-1,3-dioxa-2-stannanaphtho[1,2-h]pyrido[3,2-d]cyclononene revealed the formation of a monomeric complex with a distorted five-coordinated molecular geometry intermediate between the trigonal bipyramidal and square pyramidal. In order to find possible applications in photovoltaic devices, hybrid films of organotin(IV) complexes embedded in poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) with graphene were deposited. The topographic and mechanical properties were examined. The film with the complex integrated into the cyclohexyl substituent has high plastic deformation, with a maximum stress of 1.69 × 107 Pa and a Knoop hardness of 0.061. The lowest values of 1.85 eV for the onset gap and 3.53 eV for the energy gap were obtained for the heterostructure having the complex with the phenyl substituent. Bulk heterojunction devices were fabricated; these devices showed ohmic behavior at low voltages and a space-charge-limited current (SCLC) conduction mechanism at higher voltages. A value of 0.02 A was found for the maximum carried current. The SCLC mechanism suggests hole mobility values of between 2.62 × 10-2 and 3.63 cm2/V.s and concentrations of thermally excited holes between 2.96 × 1018 and 4.38 × 1018 m-3.
RESUMO
In this review, we present the recent progress on film metrology focused on the advanced and novel technologies during the last two decades. This review consists of various technologies and their measurement schemes to provide the inspiration for understanding each of the measurement principles and applications. In the technology and analysis section, several optical techniques used in film metrology are introduced and described with their benefits and limitations. The temporal, spatial and snapshot measurement schemes of optical film metrology are introduced in the measurement scheme section, and finally, the prospect on optical film metrology will be provided and discussed with the technology trend.
RESUMO
A portable, cost-effective and storable DNA-gold nanoparticle (AuNP) hybrid hydrogel film based biosensing system was developed, with AuNPs serving as both the crosslinking units of the film and the signaling units. Using a layer-by-layer assembly method, hydrogel film composed of three-dimensional hydrophilic network of densely packed AuNPs interconnected by responsive DNA structures was constructed onto a glass slide. By programming the sequence of DNA structures, target-responsive hybrid films were constructed. As a proof of concept, the sequence of a substrate DNA which can be identified and cleaved by Pb2+-dependent DNAzyme was encoded to construct Pb2+-responsive DNA-AuNP hybrid hydrogel film. The high-density packing of AuNPs as signal substances significantly improved the sensitivity of the ultrathin film biosensing system while reduced the cost of expensive DNA materials. A hydrogel film composed of 10 layers of assembled DNA-AuNP structures generated sufficient visual colorimetric signals for Pb2+ detection, with a detection limit of 2.6 nM. By introducing UO22+-dependent DNAzyme, the system could be further applied in the sensitive and selective detection of UO22+, with a detection limit of 10.3 nM. Compared with bulk-sized DNA hydrogel biosensing systems, the DNA-AuNP hydrogel film biosensing system exhibited faster response thanks to the sub-micrometer ultrathin film structures. Moreover, the protection of fragile non-covalently crosslinked DNA films with solid slides also facilitated the portable application and long-term storage of the resulting biosensing system, with 95% of the response signal retained after three months of storage. The DNA-AuNPs hydrogel film biosensing system is highly promising for future rapid on-site detection applications.
Assuntos
Técnicas Biossensoriais , DNA Catalítico , Nanopartículas Metálicas , Técnicas Biossensoriais/métodos , Colorimetria/métodos , Análise Custo-Benefício , DNA , DNA Catalítico/química , Ouro/química , Íons , Chumbo , Nanopartículas Metálicas/química , MetilgalactosídeosRESUMO
Herb medicines are popular for safe application due to being a source of natural herbs. However, how to deliver them in an efficacious and convenient manner poses a big challenge to researchers. In this study, a new concept is demonstrated that the electrospun polymer-based hybrid films can be a platform for promoting the delivery of a mixture of active herb extract, i.e., Lianhua Qingwen Keli (LQK), also a commercial traditional Chinese patent medicine. The LQK can be co-dissolved with the filament-forming polymeric polyvinylpyrrolidone K60 and a sweeter sucralose to prepare an electrospinnable solution. A handheld electrospinning apparatus was explored to transfer the solution into solid nanofibers, i.e., the LQK-loaded medicated films. These films were demonstrated to be composed of linear nanofibers. A puncher was utilized to transfer the mat into circular membrane a diameter of 15 mm. Two self-created methods were developed for disclosing the dissolution performances of the electrospun mats. Both the water droplet experiments and the wet paper (mimic tongue) experiments verified that the hybrid films can rapidly disintegrate when they encounter water and release the loaded LQK in an immediate manner. Based on the reasonable selections of polymeric excipients, the present protocols pave a way for delivering many types of active herb extracts in an effective and convenient manner.
RESUMO
Here, a highly luminescent, stable, and visible-transparent organic-inorganic hybrid film was in situ synthesized in a siloxane-polyether (di-ureasil) sol-gel process by dissolving a 4-hydroxy-2-methyl-1,5-naphthyridine-3-carbonitrile (2mCND) ligand and a europium(III) ion. Doping a europium(III) complex into di-ureasil achieves an boost in photoluminescence quantum efficiency (PLQY) from 23.25 to 68.9%. In particular, the excellent photostability of the hybrid film was demonstrated after a 15 h aging experiment in strong UV-LED irradiation (â¼468 mW/cm2). Compared to the polymethyl methacrylate (PMMA) matrix, di-ureasil containing a europium(III) complex shows an improved UV resistance, making it a promising candidate for various photonic applications. By integrating the hybrid film onto an acrylic substrate, a transparent luminescent solar concentrator (LSC) was fabricated, which reveals an optical conversion efficiency of â¼0.51% with a G factor of 3.1 at an optical transmission level of â¼90%. Such an LSC could be of particular interest in future transparent photovoltaic windows.
RESUMO
In recent years, metallic nanoparticle (NP)-two-dimensional material hybrids have been widely used for photocatalysis and photoreduction. Here, we introduce a femtosecond laser reduction approach that relies on the repetitive ablation of recast layers by usi-ng temporally shaped pulses to achieve the fast fabrication of metallic NP-two-dimensional material hybrids. We selectively deposited silver-reduced graphene oxide (Ag-rGO) hybrids on different substrates under various fabrication conditions. The deposition of the hybrids was attributed to the redistribution of the cooling ejected plume after multiple radiation pulses and the exchange of carriers with ejected plume ions containing activated species such as small carbon clusters and H2O. The proposed one-step in situ fabrication method is a competitive fabrication process that eliminates the additive separation process and exhibits morphological controllability. The Ag-rGO hybrids demonstrate considerable potential for chemomolecular and biomolecular detection because the surface-enhanced Raman scattering signal of the enhancement factor reached 4.04 × 108.
RESUMO
Solar-driven interfacial water evaporation is one promising technology for seawater desalination and sewage purification because it offers a feasible and sustainable strategy to relieve global water scarcity. Herein, a novel hybrid film composed of recycled carbon soot and poly(vinyl alcohol) is developed by a very simple, green, and highly scalable "salt-assisted" assembling method. The hybrid film possesses characteristics with a porous structure, superhydrophilicity, â¼100% light absorption, and low thermal conductivity, which can effectively convert light into heat under solar illumination. Consequently, the hybrid film can achieve a photothermal conversion efficiency of 91.5% under a stimulated solar irradiation of 1 kW m-2. Furthermore, the hybrid film can be applied for seawater desalination and dye wastewater purification. The findings of our work not only provide a new photothermal platform with high light-to-thermal conversion ability and good reusability but also open a new avenue for the applications of carbon soot-based hybrid films in solar-assisted water evaporation and sewage purification.
RESUMO
Aqueous zinc-ion batteries (ZIBs) with the characteristics of low production costs and good safety have been regarded as ideal candidates for large-scale energy storage applications. However, the nonconductive and non-redox active polymer used as the binder in the traditional preparation of electrodes hinders the exposure of active sites and limits the diffusion of ions, compromising the energy density of the electrode in ZIBs. Herein, we fabricated vanadium pentoxide nanofibers/carbon nanotubes (V2O5/CNTs) hybrid films as binder-free cathodes for ZIBs. High ionic conductivity and electronic conductivity were enabled in the V2O5/CNTs film due to the porous structure of the film and the introduction of carbon nanotubes with high electronic conductivity. As a result, the batteries based on the V2O5/CNTs film exhibited a higher capacity of 390 mAh g-1 at 1 A g-1, as compared to batteries based on V2O5 (263 mAh g-1). Even at 5 A g-1, the battery based on the V2O5/CNTs film maintained a capacity of 250 mAh g-1 after 2000 cycles with a capacity retention of 94%. In addition, the V2O5/CNTs film electrode also showed a high energy/power density (e.g., 67 kW kg-1/267 Wh kg-1). The capacitance response and rapid diffusion coefficient of Zn2+ (~10-8 cm-2 s-1) can explain the excellent rate capability of V2O5/CNTs. The vanadium pentoxide nanofibers/carbon nanotubes hybrid film as binder-free cathodes showed a high capability and a stable cyclability, demonstrating that it is highly promising for large-scale energy storage applications.
RESUMO
Surface-enhanced Raman scattering (SERS) with fast and intuitive property has been extensively utilized in the field of food safety. Here, we demonstrated a novel noble metal-polymer hybrid film as a SERS substrate for food fungicide analysis. Benefiting from its transparency and flexibility, poly(dimethylsiloxane) (PDMS) film was chosen as a versatile supporting matrix to grow gold nanobushes (Au NBs) through a seed-mediated process. The as-prepared AuNB-PDMS hybrid film performed satisfactorily in testing 4-nitrothiophenol (4NTP) and exhibited an enhancement factor (EF) of 2.56 × 106. Moreover, the high sensitivity and elastic properties make the hybrid film a promising substrate in practical detection. Hence, the in situ sensing of TBZ, carbaryl, and their mixture was finally realized using the developed hybrid film, which exhibited higher sensitivity than that obtained by the swabbing method. This high-performance SERS substrate based on the flexible and transparent AuNB-PDMS hybrid film has great potential applications in the fast in situ monitoring of biochemical molecules.
Assuntos
Ouro , Nanopartículas Metálicas , Polímeros , Análise Espectral RamanRESUMO
This research was aimed at the preparation of a hybrid film based on a layered silicate saponite (Sap) with the immobilized photosensitizer phloxine B (PhB). Sap was selected because of its high cation exchange capacity, ability to exfoliate into nanolayers, and to modify different surfaces. The X-ray diffraction of the films confirmed the intercalation of both the surfactant and PhB molecules in the Sap film. The photosensitizer retained its photoactivity in the hybrid films, as shown by fluorescence spectra measurements. The water contact angles and the measurement of surface free energy demonstrated the hydrophilic nature of the hybrid films. Antimicrobial effectiveness, assessed by the photodynamic inactivation on hybrid films, was tested against a standard strain and against methicillin-resistant bacteria of Staphylococcus aureus (MRSA). One group of samples was irradiated (green LED light; 2.5 h) and compared to nonirradiated ones. S. aureus strains manifested a reduction in growth from 1-log10 to over 3-log10 compared to the control samples with Sap only, and defects in S. aureus cells were proven by scanning electron microscopy. The results proved the optimal photo-physical properties and anti-MRSA potential of this newly designed hybrid system that reflects recent progress in the modification of surfaces for various medical applications.
Assuntos
Silicatos de Alumínio/química , Antibacterianos , Azul de Eosina I/química , Membranas Artificiais , Staphylococcus aureus Resistente à Meticilina/crescimento & desenvolvimento , Antibacterianos/química , Antibacterianos/farmacologiaRESUMO
Development of sensing elements for controllable soft materials is crucial to improve their responsiveness toward remotely provided external stimuli. Magnetic nanoparticles (MNPs) and gold nanoparticles (AuNPs) have been coassembled into a flexible free-floating 2D film to produce a shape deformable mobile structure in the presence of magnetic field and light irradiation by employing a self-assembly protein of α-synuclein (αS). αS was demonstrated to be essential for the preparation of a multisensory system because the intrinsically disordered protein led to a complete dispersion of MNPs to an average size of 10 nm in aqueous solution, pH-dependent closely packed single layer adsorption of αS-MNPs, and α-helix-mediated free-floating MNP monolayer film formation upon dissolving the underlying polycarbonate substrate with chloroform. As AuNPs were incorporated into the assorted hybrid film in the presence of MNPs, however, the ß-sheet component became prominent. By placing the assorted film between a spin-coated thin layer of thermoresponsive P(AAc-co-NIPAAm) hydrogel comprising acrylic acid and N-isopropylacrylamide and a passive layer of silicone elastomer, the resulting triply structure exhibited not only magnet-induced locomotion but also shape deformation due to asymmetric contraction of the sandwiching two layers caused by the heat generated by AuNPs upon near IR irradiation. In fact, two adjoining planar layers of another triply structure were shown to form a three-dimensional lotus flower with the light. This multisensory system is suggested to be further functionalized by modifying the αS molecules and incorporating additional nanoparticles to react to diverse stimuli, which would make the system be utilized in the areas of not only soft robotics but also foldable electronics, high-performance sensors/actuators, and medical/wearable applications.