RESUMO
Dens invaginatus (DI) is a rare developmental defect in dentistry that results from invagination of the enamel organ into the dental papilla during tooth formation. However, such morphology presents cases that challenge treatment and diagnosis because of the morphology of the canal. The present study reports a case of DI in a 12-year-old boy showing a very unusual clinical and radiographic appearance of maxillary lateral incisors. The flowable composite was used to seal the invagination, and an etchant and a bonding agent were used as part of the preventative or prophylactic clinical therapy that was implemented in this instance. This offers a secure and efficient substitute therapy. This method has the potential to yield the greatest results for patients by combining expertise from endodontics and restorative dentistry.
RESUMO
OBJECTIVE: To assess the 2D and 3D natural symmetry of the maxillary incisors. MATERIALS AND METHODS: Maxillary alginate impressions were taken of 59 young adult volunteers. Gender, orthodontic treatment history, and dominant hand were collected. For 2D analysis, a digital caliper was used for measurements on maxillary casts. For 3D analysis, the casts were scanned using a lab scanner, and the labial surface symmetry of contralateral incisors was evaluated. Mann-Whitney tests and Student's t-test were performed, α = 0.05. RESULTS: Results indicated a lack of identical lengths among contralateral central or lateral incisors, with minimal occurrences of identical width measurements. 68% of central incisors and 73% of lateral incisors showed differences in length exceeding 0.2 mm. Central incisors showed more similarities than lateral incisors in width, with 61% central incisors and 47% lateral incisors having differences under 0.2 mm. The differences between highly asymmetrical contralateral teeth are situated at the transitional lines. The influence of sexual dimorphism, orthodontic factors, and the dominant hand on incisors' symmetry was not statistically significant. CONCLUSIONS: 2D and 3D symmetry of the natural maxillary incisors are rare. 3D symmetry remains consistent across orthodontic treatment status, gender, and dominant hand, suggesting its independence from such parameters. CLINICAL SIGNIFICANCE: To achieve a natural and aesthetic smile rehabilitation, the symmetry of the maxillary incisors must be well understood. In our study, 2D and 3D symmetry of the maxillary incisors occurred rarely, but central incisors showed more similarities than lateral incisors in width, with differences under 0.2 mm. On the other hand, differences between highly asymmetrical contralateral teeth are situated at the transitional lines. These conclusions should be included in further computer-assisted three-dimensional smile designs.
RESUMO
The transposition of teeth is an infrequent dental abnormality characterized by the exchange of position between two adjacent teeth. This report presents a unique case of transposition involving the maxillary right canine and lateral incisor in a 20-year-old female patient. Clinical assessment and radiographic evaluation revealed the unconventional positioning of the affected teeth. Treatment planning necessitated collaborative efforts between orthodontic specialists to achieve optimal esthetic and functional outcomes. The patient underwent a comprehensive treatment regimen, including orthodontic alignment by distal drifting of the canine and mesial shifting of the lateral incisor. Subsequent long-term follow-ups confirmed stable occlusion and satisfactory esthetics in a time period of 18 months. This case underscores the significance of precise diagnosis and a multidisciplinary approach in managing intricate dental anomalies such as tooth transposition.
RESUMO
BACKGROUND: Limited evidence exists on the treatment options of tooth repositioning after intrusive luxation. AIM: The study aimed to investigate the outcomes and complications of orthodontic extrusion in treating intruded maxillary permanent incisors. DESIGN: A prospective study was conducted involving 28 intruded maxillary permanent incisors treated with orthodontic extrusion, compared with a retrospective control group of 29 teeth that underwent spontaneous re-eruption. The success rate of tooth repositioning, as well as pulp condition, periodontal healing, and root development were assessed and compared. RESULTS: The success rate of orthodontic extrusion was 96.4%, excluding one tooth that was ankylosed before treatment. There were no significant differences in pulp condition between the orthodontic extrusion and control groups for teeth with immature root development. Teeth with mature root development in the orthodontic group, however, showed a significantly higher rate of pulp necrosis (100%, p < .05). Periodontal healing outcomes were similar across both groups, regardless of the maturity of root development. The root length continued increasing during orthodontic extrusion treatment. CONCLUSIONS: Orthodontic extrusion treatment could effectively reposition moderately to severely intrusive permanent incisors, without increasing the risk of complications compared with spontaneous re-eruption.
RESUMO
INTRODUCTION: Treatment of impacted upper incisors in a labially inverted position is challenging for orthodontists, and its prognosis has not been established in the literature. Thus, this systematic review aimed to determine the effectiveness and side effects of orthodontic traction of impacted maxillary incisors in a labially inverted position. METHODS: A comprehensive search was conducted in multiple databases, including MEDLINE (via PubMed), Scopus, Embase, Science Direct, and LILACS, up to June 30, 2024. Initially, 1640 articles were identified, and after applying specific selection criteria, 11 articles were selected for full-text evaluation. Following the review, only six studies were deemed relevant, comprising one before-and-after study, two longitudinal retrospective studies, and three cross-sectional studies. Newcastle-Ottawa and Risk of Bias (ROB-2) tools were used to assess the risk of bias in the selected studies. RESULTS: The average duration of traction for maxillary labially inverted impacted central incisors ranged from 8.60±1.26months to 18±6.0months, with all cases being successfully treated. Following traction, the clinical crown height of the incisors was significantly higher compared to the control group (P<0.01). Similarly, the root length of the impacted incisors after traction was shorter in the impaction group (approximately 2mm) compared to the control group. Likewise, the thickness of the alveolar bone varied among different studies. Some authors noted that the treatment group had a smaller thickness (about 0.5mm) compared to the control group (P<0.05), while other authors found similar thickness after treatment. CONCLUSIONS: Although there are few reported studies with a low risk of bias, it is clear that it is possible to successfully treat labially inverted impacted maxillary central incisors with apparently few side effects. Following traction, the clinical crown height of these incisors increased, while the root length was shorter than their normally erupted contralateral teeth.
RESUMO
Background: The face, with its attractiveness, is positively connected with self-esteem and interpersonal relationships, and the maxillary central incisors are the most noticeable teeth and crucial for smile aesthetics. The aim of this study is to examine facial and permanent upper central incisors' clinical crown dimensions and their correlations to establish whether there is a relationship between the length/width of the face and the length/width of the clinical crown of the permanent upper central incisors. Methods: This study included 100 subjects (43 males and 57 females) with a mean age of 17.5 ± 3.4 years before orthodontic treatment. Facial length and width were measured using a cephalometer by the same orthodontist and the upper central incisors' clinical crown lengths and widths were measured using a sliding calliper by the same dental student. Data were analysed using SPSS version 29.0, presenting descriptive statistics for age, facial and upper central incisor crown dimensions, and indices. Pearson's correlation coefficient assessed the relationship between facial features and the upper central incisors' crown. The significance level was p ≤ 0.05. Results: Males exhibit a slightly higher mean value of the face length (11.6 ± 0.8 cm) compared to females' face length (11.2 ± 1.1 cm) and a statistically significant (p < 0.05) higher mean value of the face width (11.7 ± 0.8 cm) compared to females (11.1 ± 0.6 cm). The facial index shows no statistically significant gender difference (males: 99.1 ± 8.4; females: 101.2 ± 11.9, p > 0.05). The upper central incisor crown dimensions are without statistically significant differences between gender and tooth side: males have mean value clinical crown lengths of 10.2 ± 1.1 mm (left) and 10.1 mm ± 1.2 (right) while females have 9.9 ± 1.0 mm (left) and 9.8 ± 0.7 mm (right). Clinical crown widths are also comparable (males: left 9.0 ± 0.7, right 8.9 ± 0.6 and females: left 8.8 ± 0.7, right 8.8 ± 0.7), with no statistically significant differences observed. The tooth index shows no statistically significant difference but there is a statistically significant (p < 0.05) correlation between the facial index and tooth index. Conclusions: Knowledge of the presented data is important for diagnosis and treatment planning and may be useful for restorative dentists, orthodontists, prosthodontists, and maxillofacial surgeons to achieve an aesthetic result. Clinically, our study supports the development of more personalized treatment plans.
RESUMO
Background: To compare incisor angulation and/or position changes among orthodontically treated patients with metal brackets and clear aligners. Methods: A total of sixty-two participants of both sexes, aged-16-40 years old, with CL I skeletal pattern and mild crowding following strict eligibility criteria were included. The patients were divided into two groups based on their treatment approach. Pre and post lateral cephalograms were collected from Riyadh Elm University (REU) and then digitally analyzed using WEBCEPH (Medical Image Analysis) software. Eight angular and two linear measurements were used for the assessment. Results: The upper incisor angulation and position showed statistically significant differences when orthodontic clear aligners were used. In contrast, no significant difference was observed with the conventional orthodontic treatment. However, the upper incisal palatal root torque decreased after clear aligner therapy compared to conventional treatment. The inter-incisal angle demonstrated a significant increase with clear aligners compared to conventional treatment. Conclusions: The current study revealed the importance of definitive guidelines upon and after treatment, in addition to determining incisor changes. Orthodontic clear aligners are distinct from conventional treatments in controlling the incisors' angulation and position. The expansion treatment modality precedes Interproximal reduction in increasing the arch perimeter.
Assuntos
Incisivo , Humanos , Masculino , Feminino , Adolescente , Estudos Retrospectivos , Adulto Jovem , Adulto , Cefalometria , Má Oclusão/terapia , Braquetes OrtodônticosRESUMO
OBJECTIVES: This study aimed to develop and validate a predictive nomogram for diagnosing radicular grooves (RG) in maxillary lateral incisors (MLIs), integrating demographic information, anatomical measurements, and Cone Beam Computed Tomography (CBCT) data to diagnose the RG in MLIs based on the clinical observation before resorting to the CBCT scan. MATERIALS AND METHODS: A retrospective cohort of orthodontic patients from the School and Hospital of Stomatology, Wuhan University, was analyzed, including demographic characteristics, photographic anatomical assessments, and CBCT diagnoses. The cohort was divided into development and validation groups. Univariate and multivariate logistic regression analyses identified significant predictors of RG, which informed the development of a nomogram. This nomogram's performance was validated using receiver operating characteristic analysis. RESULTS: The study included 381 patients (64.3% female) and evaluated 760 MLIs, with RG present in 26.25% of MLIs. The nomogram incorporated four significant anatomical predictors of RG presence, demonstrating substantial predictive efficacy with an area under the curve of 0.75 in the development cohort and 0.71 in the validation cohort. CONCLUSIONS: A nomogram for the diagnosis of RG in MLIs was successfully developed. This tool offers a practical checklist of anatomical predictors to improve the diagnostic process in clinical practice. CLINICAL RELEVANCE: The developed nomogram provides a novel, evidence-based tool to enhance the detection and treatment planning of MLIs with RG in diagnostic and therapeutic strategies.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Incisivo , Maxila , Nomogramas , Humanos , Feminino , Masculino , Incisivo/diagnóstico por imagem , Estudos Retrospectivos , Tomografia Computadorizada de Feixe Cônico/métodos , Adolescente , Maxila/diagnóstico por imagem , Raiz Dentária/diagnóstico por imagem , Criança , ChinaRESUMO
AIM: To evaluate the three-dimensional position and root resorption of incisors after anterior segment retraction (ASR) using friction versus frictionless mechanics. PARTICIPANTS AND METHODS: Thirty female patients (13-18 years) with bimaxillary protrusion were randomly allocated into two groups. In the intervention group, ASR was undertaken using an elastomeric chain rendering 160 g/side extending between mini-screw implant and a hook crimped on 0.017 × 0.025-inch stainless-steel wire distal to the lateral incisor. In the comparison group, ASR was undertaken using closing T-loops fabricated from 0.017 × 0.025-inch titanium molybdenum alloy (TMA) wire rendering comparable retraction force. In both groups, the canine brackets were ligated after retraction to the mini-screw implants that were inserted in both the upper and lower arches bilaterally. The primary outcome was the three-dimensional changes in the position of the incisors. The secondary outcome was root resorption. These were measured from cone-beam computed tomography scans. RESULTS: Statistically significant decreases in the upper (UI) and lower incisors (LI) crown torque were seen in both groups; however, the difference between groups was not statistically or clinically significant (UI MD -2.04°; 95% confidence interval [CI] = -8.02-3.95; LI MD -0.49°; 95% CI = -7.06-6.08). Significant tipping of upper (MD -1.17°; 95% CI = -2.06--0.27) and lower (MD -1.13°; 95% CI = -1.66--0.60) incisors was found in the friction, but not the frictionless group after retraction; however, the changes were not clinically significant. Significant lower incisor intrusion was found in both groups after retraction; however, the difference between groups was not statistically or clinically significant (MD -0.61°; 95% CI = -1.99-0.77). Statistically significant decreases in the UI and LI root length were seen in both groups. The difference between groups for UI changes was statistically significant (MD 0.54 mm; 95% CI = -0.02-1.07) but probably not clinically significant. CONCLUSION: Considering the limitations in the current study, there was no advantage of either mechanics over the other regarding the final position of incisors. The likelihood of root resorption should be considered when frictionless mechanics are used for retraction of incisors. REGISTRY: Clinicaltrials.gov (NCT04878939).
RESUMO
Introduction and Aim: Performing endodontic treatment in an immature permanent tooth that has experienced trauma or carious exposure can pose challenges. The root canals in these teeth are typically open and fragile, making instrumentation and obturation difficult. Traditional apexification, which involves placing calcium hydroxide paste in the root canal for a specified period to induce the formation of a calcified barrier, has been a long-standing approach. While it is a widely used method, leaving the paste in the root for extended periods can weaken it due to the paste's hygroscopic properties and the proteolytic activities of calcium hydroxide. As a result, researchers have been exploring alternative treatments that allow for the full development of immature teeth. Revascularization has emerged as one such alternative, with a variety of treatment protocols documented in scientific literature. Description of the Case: This case report, for the first time, describes the use of NeoPutty MTA® and triple antibiotics paste for revascularization in a young female child on a carious, exposed lateral incisor with opex apex with success. Conclusion: The revascularization process attempted on the infected tooth met with success and closure of apex was noticed in a short period of time.
RESUMO
BACKGROUND/AIM: To evaluate the long-term survival of immature traumatized incisors with pulp necrosis and apical periodontitis after endodontic treatment with two apexification techniques (calcium hydroxide apexification and MTA-apical plug) and to identify major factors affecting the survival of these teeth. MATERIALS AND METHODS: Records of 2400 children and adolescents were screened for presence of traumatic dental injuries to immature incisors where endodontic treatment with the two apexification techniques was performed during January 2003 and December 2022, compared to a control group of mature teeth treated with conventional endodontic techniques. The studied variables were age; sex; apexification technique, presence of luxation and hard tissue injuries; preoperative root development stage (RDS), preoperative and postoperative periapical index (PAI), the time-point for tooth loss, and overall survival time in years. Kaplan-Meier estimates were used to graphically present the survival functions and Cox proportional hazard model to calculate hazard ratios (HR, 95% CI). RESULTS: The median survival time was 10 years for calcium hydroxide apexification, 16.1 for MTA-apexification, for luxation injuries other than intrusions and avulsions 15.5 years, for intrusions 12.5 years and for avulsions 6.8 years. The variables with significant negative impact on tooth survival were calcium hydroxide apexification, avulsion and postoperative PAI 3-5. No significant relationships were found for the variables MTA apexification, concussion; subluxation; lateral luxation; extrusion, intrusion, hard tissue injuries, preoperative RDS and PAI scores and postoperative PAI 1-2. After adjustment, the risk for premature tooth loss was 13.5 times higher in calcium hydroxide apexification, approximately 2 to 4 times higher in PAI 3-5, and 5.6 times higher in avulsions. CONCLUSIONS: Calcium hydroxide apexification, avulsion, and postoperative PAI 3-5 were identified as prognostic variables with significant negative impact on the risk for premature tooth loss.
RESUMO
A precursor for effective root canal treatment (RCT) is a complete understanding of the internal anatomy of teeth. In this study, the authors aimed to classify the root canal morphology of anterior teeth in the Yemeni population and identify gender-based variations among them. In addition, the symmetry among adjacent quadrants was also evaluated. Cone beam computed tomography (CBCT) scans of 2935 anterior teeth, 1502 maxillary, and 1433 mandibular were analyzed for root canal morphology and symmetry. Comparison between groups and among different genders was done using the Chi-square test. All the maxillary teeth were single-rooted and had a predominantly 1TN1 (Vertucci Type I) canal morphology. In addition to 1TN1, the presence of 1TN1-2-1 (Vertucci type III) and 1TN1-2-1-2-1 (not classified NC according to Vertucci) morphologies were noticed in the maxillary canines. Among the mandibular anteriors, the canal morphologies identified include 1TN1 in majority of the scans followed by 1TN2-1 (Vertucci II), 1TN1-2-1, 1TN1-2 (Vertucci V), 1TN1-2-1-2 (Vertucci VII) was seen only in incisors and newer canal types like 1TN2-1-2-1 (NC Vertucci) and 1TN1-2-1-2-1 (NC Vertucci) was seen in canines and lateral incisors. Two roots were only seen in the mandibular canines and classified as 2TN1-2 (NC Vertucci). Variations in root and root canal morphologies were seen among both genders. However, the results were not significant. All the maxillary teeth except 0.8% were bilaterally symmetrical. In mandible, symmetry ranged between 84.5 and 86.5%. In conclusion, single-rooted teeth with 1TN1 classification are most commonly seen in all the anterior teeth. Gender-based differences were non-significant, and bilateral symmetry was high. Ahmed et al. classification could precisely represent the root canal morphology in two rooted teeth.
RESUMO
Congenital partial hypodontia is a commonly encountered disorder, presenting a challenge for adolescents seeking treatment, as existing options often come with drawbacks. Among these options, the Maryland Bridge stands out for its accessibility and notable benefits in terms of both strength and aesthetics. This article explores the merits of this treatment modality, supported by a detailed case study demonstrating its successful application. An 18-year-old patient was referred to our hospital with a complaint of missing bilateral maxillary incisors. Upon clinical examination, it became apparent that the orthodontic treatment was done and exhibited the absence of bilateral incisors in the upper arch. Subsequent diagnosis confirmed congenital partial hypodontia. To address the missing teeth, a treatment plan centered around the use of a Maryland Bridge was devised. One of the persistent challenges faced by restorative dentists is devising solutions for congenitally missing lateral incisors. Despite the availability of numerous therapeutic alternatives, none are without their limitations. However, the outcome of the rehabilitation in this case proved to be notably aesthetically pleasing, effectively fulfilling the intended purpose. As a result, this article advocates for the Maryland Bridge as a viable option for patients facing similar dental challenges.
RESUMO
The root of late-dental-age labial inversely impacted maxillary central incisors (LIIMCIs) typically develops to severe dilacerated morphology. Therefore, reliable posttreatment periodontal estimates of orthodontic treatment prognosis would be critical to the treatment value of impacted incisors. This study aims to analyze further changes in dimensions of the alveolar bone following the closed-eruption treatment of late-dental-age dilacerated LIIMCIs. Cone beam computed tomography (CBCT) scanning data of 16 patients with unilateral dilacerated late-dental-age LIIMCIs were collected, including the pretreatment (T1) and at the 2.23 ± 0.78 years follow-up stage (T2) respectively. Patients underwent closed-eruption treatments to bring the impacted incisor into the dental arch. Dolphin imaging software was used to measure alveolar bone height labially, palatally, and proximally to the site at T1 and T2, as well as alveolar bone thicknesses at 0, 2, 4, 6 and 8 mm below the initial measurement plane (IMP). The alveolar bone heights on the impacted and contralateral sides increased from T1 to T2 (p < 0.05). Alveolar bone growth on both sides had no significant difference. In T2, the mean values of labial and distal alveolar heights on the contralateral sides were greater than on the impacted sides (p < 0.05). The mean values of total alveolar bone thicknesses on the impacted sides in T1 were significantly smaller than those on the contralateral sides in IMP-0, 2, 4, 6, 8 (p < 0.05). The total thicknesses on the impacted sides in T2 increased and were significantly greater than on the contralateral sides (p < 0.05), except for the thickness in IMP-0. The closed-eruption treatment of dilacerated late-dental-age LIIMCIs results in no significant changes to alveolar bone height, except on the labial and distal sides, with increased alveolar bone thickness, suggesting that this approach may be viable first choice therapy for non-extraction orthodontic cases.
Assuntos
Processo Alveolar , Tomografia Computadorizada de Feixe Cônico , Incisivo , Maxila , Dente Impactado , Humanos , Incisivo/diagnóstico por imagem , Processo Alveolar/diagnóstico por imagem , Processo Alveolar/crescimento & desenvolvimento , Estudos Retrospectivos , Tomografia Computadorizada de Feixe Cônico/métodos , Dente Impactado/terapia , Dente Impactado/diagnóstico por imagem , Feminino , Masculino , Criança , Pré-EscolarRESUMO
Introduction: The anatomical configuration classified as Vertucci's type III is described as the second most prevalent in mandibular incisors. Methods: Thirty-six Vertucci's type III mandibular incisors were evaluated by micro-computed tomography (micro-CT) and divided into 3 groups (n = 12) according to the root canal preparation protocol (HyFlex CM [HCM], HyFlex EDM [HEDM], and Sequence Rotary File [SRF]). The teeth were scanned before and after performing 0.25 mm and 0.40 mm apical diameter preparations. The canal volume, dentin thickness, percentage of accumulated debris and untouched canal areas, transportation, and centering ability were measured. The data were statistically analyzed by ANOVA, Tukey, Kruskal-Wallis, and Dunn tests (P < 0.05). Results: The volume increase was more evident in the apical third. After 0.40 mm preparation, the SRF system provided a higher reduction (P < 0.05) in dentin thickness on the buccal surface 1 mm from the apex. There was higher canal transportation in the bucco-lingual direction. The 0.40 mm apical preparation reduced the percentage of untouched canal areas. The apical third had the highest percentage of untouched canal areas. The cervical third had the lowest volume of accumulated debris. Conclusions: Increasing the apical preparation to a diameter of 0.40 mm with the HCM, HEDM, and SRF systems in Vertucci's type III root canals of mandibular incisors proved to be safe and effective, reducing untouched canal areas. Clinical relevance: Root flattening can be intense to the point of generating a root canal bifurcation. Despite the decrease in the root canal diameter, a greater enlargement of the apical region is necessary and safe.
RESUMO
The chromodomain helicase DNA-binding (CHD) and chromobox (CBX) families of proteins play crucial roles in cell fate decisions, differentiation, and cell proliferation in a broad variety of tissues and cell types. CHD proteins are ATP-dependent epigenetic enzymes actively engaged in transcriptional regulation, DNA replication, and DNA damage repair, whereas CBX proteins are transcriptional repressors mainly involved in the formation of heterochromatin. The pleiotropic effects of CHD and CBX proteins are largely dependent on their versatility to interact with other key components of the epigenetic and transcriptional machinery. Although the function and regulatory modes of CHD and CBX factors are well established in many cell types, little is known about their roles during osteogenic differentiation. A single-cell RNA-sequencing analysis of the mouse incisor dental pulp revealed distinct spatiotemporal expression patterns of CHD- and CBX-encoding genes within different clusters of mesenchymal stromal cells (MSCs) representing various stages of osteogenic differentiation. Additionally, genes encoding interaction partners of CHD and CBX proteins, such as subunits of the trithorax-COMPASS and polycomb chromatin remodeling complexes, exhibited differential co-expression behaviors within MSC subpopulations. Thus, CHD- and CBX-encoding genes show partially overlapping but distinct expression patterns in MSCs, suggesting their differential roles in osteogenic cell fate decisions.
RESUMO
Supernumerary teeth are presented in any region of the dental arches as additional teeth to the standard set of teeth and may present in either the primary or secondary dentition. They can be found as single or multiple teeth on one or both sides of the dental arches, with a preference for the premaxilla. The supernumerary teeth might cause aesthetic and/or functional problems, mainly if situated in the maxillary anterior region. Multiple supernumerary teeth are often related to specific conditions or in syndromic patients, i.e., cleft palate, cleft lip, cleidocranial dysplasia, and Gardner's syndrome. This report presents a case of an eight-year-old female patient with non-syndromic bilateral supernumerary teeth in the primary and secondary dentition. The patient is medically fit, and her family history was non-contributory.
RESUMO
BACKGROUND: Early mixed dentition represents a critical phase since crowding conditions can occur. The interceptive resolution of dental crowding allows favorable arch and occlusal development. The aim of the present investigation was to evaluate dentoalveolar changes of clear aligner treatment planned to manage lower incisor crowding, loss of arch length, and midline deviation in early mixed dentition. METHODS: A total of 13 patients (7 females, 6 males, 9.4 ± 1.2 age) treated with clear aligners were selected. Arch dimensions and incisor inclinations were evaluated before (T0) and at the end of interceptive treatment (T1). A paired t-test was chosen to compare T1-T0 changes. The level of significance was set at 5%. RESULTS: The greatest significant increase in mandibular width was observed at the level of the first deciduous molars (+2.44 ± 1.4 mm), followed by the second permanent molars (+2.16 ± 1.4 mm). Lower arch length and arch depth showed a statistically relevant increase (2 ± 0.6 mm and 4.5 ± 1.6 mm, respectively). The mean lower dental midline changes were statistically significant (1.42 ± 0.73 mm). CONCLUSIONS: Early treatment with clear aligners, including the combination of transversal arch development, maintenance of leeway space, and guidance of eruption, represents a valid treatment strategy in early mixed dentition to manage arch crowding and occlusion development.
RESUMO
INTRODUCTION: The most common treatment approaches for patients missing maxillary lateral incisors are implant replacement (IT) and orthodontic space closure (SC). Treatment techniques change and improve over time, and it is of interest to know if improvements differ between the methods. AIM: To compare the aesthetic outcome and other clinical findings in patients with one or two missing maxillary lateral incisors who were treated with a 10-year difference in time, with either orthodontic space closure or implant replacement. MATERIAL AND METHODS: A total of 88 patients were included in the study. Forty-four patients treated between 2011 and 2018 were included as the latter cohort (LC). The LC was compared to the early cohort (EC; nâ =â 44), treated between 2001 and 2008. A total of 132 teeth was analysed: 62 teeth in the EC (28 teeth in IT cases and 34 teeth in SC cases) and 70 teeth in the LC (34 teeth in IT cases and 36 teeth in SC cases). Long-term clinical and aesthetic outcomes were evaluated. RESULTS: An improvement over time was found in crown length, BoP, papilla, the inclination of incisors, and overall appearance in IT cases and in crown colour and overbite in SC cases. A deterioration over time was found in crown length and BoP among the SC cases. CONCLUSION: Among the IT cases, an improvement in outcomes was noted over time. When comparing SC cases the colour of the crown and overbite had improved, while crown length and BoP had deteriorated over time.
Assuntos
Estética Dentária , Incisivo , Fechamento de Espaço Ortodôntico , Humanos , Incisivo/anormalidades , Incisivo/patologia , Feminino , Masculino , Fechamento de Espaço Ortodôntico/métodos , Maxila , Anodontia/terapia , Fatores de Tempo , Adulto , Adolescente , Resultado do Tratamento , Estudos Retrospectivos , Adulto JovemRESUMO
Premature loss of primary teeth due to early childhood caries could be treated with different options. Presented cases discuss the clinical sequence of rehabilitation of maxillary anterior primary teeth. Endodontic treatment was followed by composite resin restoration reinforced with fiberglass post. Two case reports present a treatment option for severely mutilated primary maxillary incisors due to early childhood caries.