Development of a supramolecular solvent-based extraction method for application to quantitative analyses of a wide range of organic contaminants in indoor dust.

This study investigates the efficacy of supramolecular solvent (SUPRAS) in extracting a diverse spectrum of organic contaminants from indoor dust. Initially, seven distinct SUPRAS were assessed across nine categories of contaminants to identify the most effective one. A SUPRAS comprising Milli-Q water, tetrahydrofuran, and hexanol in a 70:20:10 ratio, respectively, demonstrated the best extraction performance and was employed for testing a wider array of organic contaminants. Furthermore, we applied the selected SUPRAS for the extraction of organic compounds from the NIST Standard Reference Material (SRM) 2585. In parallel, we performed the extraction of NIST SRM 2585 with conventional extraction methods using hexane:acetone (1:1) for non-polar contaminants and methanol (100%) extraction for polar contaminants. Analysis from two independent laboratories (in Norway and the Czech Republic) demonstrated the viability of SUPRAS for the simultaneous extraction of twelve groups of organic contaminants with a broad range of physico-chemical properties including plastic additives, pesticides, and combustion by-products. However, caution is advised when employing SUPRAS for highly polar contaminants like current-use pesticides or volatile substances like naphthalene.

Exophiala species in household environments and their antifungal resistance profile.

The black fungus Exophiala causes a wide range of infections from superficial to subcutaneous, but also invasive fungal infections in immunocompromised patients as well as healthy individuals. In addition, Exophiala, is a common colonizer of the air ways of patients with cystic fibrosis. However, the source of infection and mode of transmission is still unclear. The aim of this study was to investigate the presence of Exophiala in samples collected from Swedish indoor environments. We found that the Exophiala species were commonly found in dishwashers and that Exophiala dermatitidis was the most common Exophiala species, being identified in 70% (26 out of the 37) of samples. Almost all E. dermatitidis isolates had the ability to grow at 42 °C (P = 0.0002) and were catalase positive. Voriconazole and posaconazole exhibited the lowest MICs, while caspofungin and anidulafungin lack the antifungal activities in vitro. Future studies are needed to illuminate the transmission mode of the fungi.

A Critical Review of the Propagation Models Employed in LoRa Systems.

LoRa systems are emerging as a promising technology for wireless sensor networks due to their exceptional range and low power consumption. The successful deployment of LoRa networks relies on accurate propagation models to facilitate effective network planning. Therefore, this review explores the landscape of propagation models supporting LoRa networks. Specifically, we examine empirical propagation models commonly employed in communication systems, assessing their applicability across various environments such as outdoor, indoor, and within vegetation. Our investigation underscores the prevalence of logarithmic decay in most empirical models. In addition, we survey the relationship between model parameters and environmental factors, clearing their nuanced interplay. Analyzing published measurement results, we extract the log-distance model parameters to decipher environmental influences comprehensively. Drawing insights from published measurement results for LoRa, we compare them with the model's outcomes, highlighting successes and limitations. We additionally explore the application of multi-slope models to LoRa measurements to evaluate its effectiveness in enhancing the accuracy of path loss prediction. Finally, we propose new lines for future research in propagation modelling to improve empirical models.

Online acceptance and commitment therapy (iACT) for adults with persistent physical symptoms - 3-month follow-up study of a randomized controlled trial.

OBJECTIVE: Persistent physical symptoms (PPS) represent a major health problem affecting daily functioning. This RCT aimed to examine whether a guided Internet-based treatment based on acceptance and commitment therapy (ACT) provided additional benefits compared to Treatment as Usual (TAU) in reducing somatic complaints and psychological distress in adults with PPS. METHODS: A total of 103 adults with PPS related to indoor environments, chronic fatigue or both conditions were assigned to receive either either a 14-week intervention (video-based case conceptualization + Internet-based ACT) combined with TAU (iACT + TAU; n = 50) or TAU alone (n = 53). Somatic symptoms, depression, anxiety, insomnia, and psychological flexibility were assessed from pre-intervention to a 3-month follow-up. Additionally, the association between changes in psychological flexibility from pre- to post-intervention and changes in symptoms from pre to 3-month follow-up was explored. Analyses were conducted using a multigroup method with full information maximum likelihood estimator. RESULTS: The results revealed a significant interaction effect, indicating reductions in somatic symptoms and symptoms of depression and anxiety with moderate to large between-group effects (d = 0.71-1.09). No significant interaction effect was observed in insomnia and measures of psychological flexibility. CONCLUSION: Internet-based ACT, when combined with Treatment as Usual, demonstrated efficacy for individuals with PPS associated with indoor environments and chronic fatigue. These findings are pertinent for primary healthcare providers, suggesting that the current treatment model could serve as a low-threshold first-line treatment option. THE CLINICAL TRIAL REGISTRATION NUMBER: NCT04532827.

Prenatal risk factors of indoor environment and incidence of childhood eczema in the Japan Environment and Children's Study.

The quality of indoor environment is a risk factor for early childhood eczema and atopic dermatitis; however, its influence during pregnancy on childhood eczema in Japan has not been investigated. In this study, we aimed to determine the indoor environmental factors that are associated with eczema in children up to 3 years of age, using national birth cohort data from the Japan Environment and Children's Study (JECS). Information on indoor environments and eczema symptoms until 3 years of age was collected using self-administered questionnaires to the mothers. A total of 71,883 and 58,639 mother-child pairs at 1.5- and 3-years-old, respectively, were included in the former analyses. To account for prenatal indoor risk factors, 17,568 (1.5-years-old) and 7063 (3-years-old) children without indoor mold and/or ETS exposure were included in the final analysis. A higher mold index, gas heater use, parquet flooring use, and frequent insecticide use showed significantly increased risks for childhood eczema up to 3 years of age. These associations were consistent after stratification analysis among children whose parents did not have a history of allergies. The updated WHO guidelines on indoor air quality should be implemented based on recent findings regarding the effects of prenatal exposure to indoor dampness on health effects of children further in life, including asthma, respiratory effects, eczema, and other immunological effects.

Influence of environmental variables on students' cognitive performance in indoor higher education environments.

BACKGROUND: Educational environments can have environmental conditions that are incompatible with the needs of students, compromising their well-being and affecting their performance. OBJECTIVE: To identify the environmental variables that influence the performance of university students and measure this influence through an experiment in indoor environments. METHODS: The study applied an experimental methodology for three consecutive days in seven educational environments located in different regions of Brazil, measuring the environ-mental conditions, the students' perception of the environment, and their cognitive performance. The impact of environmental variables and environmental perception on student performance was analyzed using Generalized Linear Models and a Structural Equation Model. RESULTS: Students who took the test at air temperatures between 22.4°C and 24.7°C had a 74.20% chance of performing better than those outside this range. Air temperatures between 26.2°C and 29°C were associated with an 86% chance of taking less time to complete the test. High illuminance levels increased the chance of taking longer to answer the test by 41.7%. CONCLUSIONS: Three environmental variables (relative humidity, lighting and air temperature) and two perceptual dimensions (light and thermal perception) directly influence student performance.

High-Resolution Mass Spectrometry Screening of Quaternary Ammonium Compounds (QACs) in Dust from Homes and Various Microenvironments in South China.

Despite their ubiquitous use, information regarding the presence of quaternary ammonium compounds (QACs) in various microenvironments remains scarce and only a small subset of QACs has been monitored using targeted chemical analysis. In this study, a total of 111 dust samples were collected from homes and various public settings in South China during the COVID-19 pandemic and were analyzed for traditional and emerging QACs using high-resolution mass spectrometry. The total traditional QAC concentrations in residential dust (∑traditional QAC, sum of 18 traditional QACs) ranged from 13.8 to 150 µg/g with a median concentration of 42.2 µg/g. Twenty-eight emerging QACs were identified in these samples, and the composition of ∑emerging QAC (sum of emerging QACs) to ∑QAC (sum of traditional and emerging QACs) ranged from 19 to 42% across various microenvironments, indicating the widespread existence of emerging QACs in indoor environments. Additionally, dust samples from cinemas exhibited higher ∑QAC concentrations compared to homes (medians 65.9 µg/g vs 58.3 µg/g, respectively), indicating heavier emission sources of QACs in these places. Interestingly, significantly higher ∑QAC concentrations were observed in dust from the rooms with carpets than those without (medians 65.6 µg/g vs 32.6 µg/g, p < 0.05, respectively). Overall, this study sheds light on the ubiquitous occurrence of QACs in indoor environments in South China.

Human exposure to methyl and butyl parabens and their transformation products in settled dust collected from urban, semi-urban, rural, and tribal settlements in a tropical environment.

The present study involved monitoring the distribution of two widely consumed parabens (methyl paraben (MeP) and butyl paraben (BuP)) and their transformation products in indoor dust from different categories of settlement (urban, semi-urban, rural, and tribal homes). The results revealed a prevalent occurrence of parabens in all the settlement categories. A non-normal distribution pattern for MeP and BuP levels across the sampling sites was noted. While comparing the residence time of parabens in dust samples, it was found that the half-lives of the analytes were greater in the dust from urban (MeP t1/2: 47.510 h; BuP t1/2: 22.354 h) and rural (MeP t1/2: 27.725 h and BuP t1/2: 31.500 h) areas. The presence of paraben metabolites, such as hydroxy methylparaben (OH-MeP), para hydroxy benzoic acid (p-HBA), and benzoic acid (BA) in dust samples supports their transformation within indoor spaces. The average daily intake of parabens through dust ingestion and dermal absorption by children was higher than adults. BuP was the prime contributor (>85%) to the total estradiol equivalency quotient (tEEQ) in all the settlement categories.

Relative Role of Age Groups and Indoor Environments in Influenza Transmission Under Different Urbanization Rates in China.

Exploring the relative role of different indoor environments in respiratory infections transmission remains unclear, which is crucial for developing targeted nonpharmaceutical interventions. In this study, a total of 2,583,441 influenza-like illness cases tested from 2010 to 2017 in China were identified. An agent-based model was built and calibrated with the surveillance data, to assess the roles of 3 age groups (children <19 years, younger adults 19-60 years, older adults >60 years) and 4 types of indoor environments (home, schools, workplaces, and community areas) in influenza transmission by province with varying urbanization rates. When the urbanization rates increased from 35% to 90%, the proportion of children aged <19 years among influenza cases decreased from 76% to 45%. Additionally, we estimated that infections originating from children decreased from 95.1% (95% confidence interval (CI): 92.7, 97.5) to 59.3% (95% CI: 49.8, 68.7). Influenza transmission in schools decreased from 80.4% (95% CI: 76.5, 84.3) to 36.6% (95% CI: 20.6, 52.5), while transmission in the community increased from 2.4% (95% CI: 1.9, 2.8) to 45.4% (95% CI: 35.9, 54.8). With increasing urbanization rates, community areas and younger adults contributed more to infection transmission. These findings could help the development of targeted public health policies. This article is part of a Special Collection on Environmental Epidemiology. This article is part of a Special Collection on Environmental Epidemiology.

A comprehensive review of microbial contamination in the indoor environment: sources, sampling, health risks, and mitigation strategies.

The quality of the indoor environment significantly impacts human health and productivity, especially given the amount of time individuals spend indoors globally. While chemical pollutants have been a focus of indoor air quality research, microbial contaminants also have a significant bearing on indoor air quality. This review provides a comprehensive overview of microbial contamination in built environments, covering sources, sampling strategies, and analysis methods. Microbial contamination has various origins, including human occupants, pets, and the outdoor environment. Sampling strategies for indoor microbial contamination include air, surface, and dust sampling, and various analysis methods are used to assess microbial diversity and complexity in indoor environments. The review also discusses the health risks associated with microbial contaminants, including bacteria, fungi, and viruses, and their products in indoor air, highlighting the need for evidence-based studies that can relate to specific health conditions. The importance of indoor air quality is emphasized from the perspective of the COVID-19 pandemic. A section of the review highlights the knowledge gap related to microbiological burden in indoor environments in developing countries, using India as a representative example. Finally, potential mitigation strategies to improve microbiological indoor air quality are briefly reviewed.

Airborne SARS-CoV-2 is more frequently detected in environments related to children and elderly but likely non-infectious, Norway, 2022.

This study investigates the presence of SARS-CoV-2 in indoor and outdoor environments in two cities in Norway between April and May 2022. With the lifting of COVID-19 restrictions in the country and a focus on vaccination, this research aims to shed light on the potential for virus transmission in various settings. Air sampling was conducted in healthcare and non-healthcare facilities, covering locations frequented by individuals across different age groups. The study found that out of 31 air samples, only four showed the presence of SARS-CoV-2 RNA by RT-qPCR, with no viable virus detected after RNAse pre-treatment. These positive samples were primarily associated with environments involving children and the elderly. Notably, sequencing revealed mutations associated with increased infectivity in one of the samples. The results highlight the importance of considering children as potential sources of virus transmission, especially in settings with prolonged indoor exposure. As vaccination coverage increases globally, and with children still representing a substantial unvaccinated population, the study emphasizes the need to re-implement mask-wearing mandates indoors and in public transport to reduce virus transmission. The findings have implications for public health strategies to control COVID-19, particularly in the face of new variants and the potential for increased transmission during the autumn and winter seasons.

Indoor microplastics: a comprehensive review and bibliometric analysis.

Indoor microplastic (MP) pollution is becoming a worldwide issue because people spend more time inside. Through dust and air, indoor MP pollution may harm human health. This review summarizes recent advancements in indoor MP research, covering pretreatments, quality control, filter membranes, and identification methods. Additionally, it conducts bibliometric analysis to examine the usage of keywords, publication records, and authors' contributions to the field. Comparatively, dust and deposition samples exhibit higher MP concentrations than indoor air samples. Fiber-shaped MPs are commonly detected indoors. The color and types of MPs display variability, with polypropylene, polyethylene, polyethylene terephthalate, and polystyrene identified as the dominant MPs. Indoor environments generally demonstrate higher concentrations of MPs than outdoor environments, and MPs in the lower size range (1-100 µm) are typically more abundant. Among the reviewed articles, 45.24% conducted pretreatment on their samples, while 16.67% did not undergo any pretreatment. The predominant filter utilized in most studies was the Whatman Glass microfiber filter (41.67%), and MPs were predominantly characterized using µ-FTIR (19.23%). In the literature, 17 papers used blank samples, and eight did not. Blank findings were not included in most research (23 articles). A significant increase in published articles has been observed since 2020, with an annual growth rate exceeding 10%. The keyword microplastics had the highest frequency, followed by fibers. This indoor MP study emphasizes the need for collaborative research, policymaking, and stakeholder involvement to reduce indoor MP pollution. As indoor MP research grows, so are opportunities to identify and minimize environmental and health impacts.

Indoor Bacterial and Fungal Burden in "Moldy" versus "Non-Moldy" Homes: A Case Study Employing Advanced Sequencing Techniques in a US Metropolitan Area.

The presence of fungi in the indoor environment is associated with allergies and other respiratory symptoms. The aim of this study was to use sequencing and molecular methods, including next-generation sequencing (NGS) approaches, to explore the bacterial and fungal communities and their abundance in the indoor environment of houses (n = 20) with visible "moldy" (HVM) and nonvisible "non-moldy" (HNM) in Memphis, TN, USA. Dust samples were collected from air vents and ground surfaces, and the total DNA was analyzed for bacteria and fungi by amplifying 16S rRNA and ITS genes on the Illumina Miseq. Results indicated that Leptosphaerulina was the most abundant fungal genus present in the air vent and ground samples from HNM and HVM. At the same time, the most abundant bacterial genera in the air vent and ground samples were Propionibacterium and Streptococcus. The fungi community diversity was significantly different in the air vent samples. The abundance of fungal species known to be associated with respiratory diseases in indoor dust samples was similar, regardless of the visibility of fungi in the houses. The existence of fungi associated with respiratory symptoms was compared with several parameters like dust particulate matter (PM), CO2 level, temperature, and humidity. Most of these parameters are either positively or negatively correlated with the existence of fungi associated with respiratory diseases; however, none of these correlations were significant at p = 0.05. Our results indicate that implementing molecular methods for detecting indoor fungi may strengthen common exposure and risk assessment practices.

Fast and Noise-Resilient Magnetic Field Mapping on a Low-Cost UAV Using Gaussian Process Regression.

This study presents a comprehensive approach to mapping local magnetic field anomalies with robustness to magnetic noise from an unmanned aerial vehicle (UAV). The UAV collects magnetic field measurements, which are used to generate a local magnetic field map through Gaussian process regression (GPR). The research identifies two categories of magnetic noise originating from the UAV's electronics, adversely affecting map precision. First, this paper delineates a zero-mean noise arising from high-frequency motor commands issued by the UAV's flight controller. To mitigate this noise, the study proposes adjusting a specific gain in the vehicle's PID controller. Next, our research reveals that the UAV generates a time-varying magnetic bias that fluctuates throughout experimental trials. To address this issue, a novel compromise mapping technique is introduced, enabling the map to learn these time-varying biases with data collected from multiple flights. The compromise map circumvents excessive computational demands without sacrificing mapping accuracy by constraining the number of prediction points used for regression. A comparative analysis of the magnetic field maps' accuracy and the spatial density of observations employed in map construction is then conducted. This examination serves as a guideline for best practices when designing trajectories for local magnetic field mapping. Furthermore, the study presents a novel consistency metric intended to determine whether predictions from a GPR magnetic field map should be retained or discarded during state estimation. Empirical evidence from over 120 flight tests substantiates the efficacy of the proposed methodologies. The data are made publicly accessible to facilitate future research endeavors.

Design of colorimetric nanostructured sensor phases for simple and fast quantification of low concentrations of acid vapors.

Two colorimetric nanostructured sensor phases (Color-NSPs) for the determination of low concentrations of acid vapors in the atmosphere of paper storage rooms have been designed and characterized. The acid vapor determination is based on the color change that occurs in polyaniline (PANI) in the presence of acids when it goes from its emeraldine base form (blue) to its emeraldine salt form (green). To synthesize the Color-NSPs, two methods have been used, a one-step method performed by grafting polyaniline onto a cellulose membrane (Cellu-PANI) and a two-step method in which in the first step, polyaniline is grafted onto the surface of polymeric nanoparticles (NPs-PANI), and in a second step, NPs-PANI are immobilized into the pores of a nylon membrane (Nylon-NPs PANI). The response of the sensors versus acid vapor was measured by color coordinates with a photographic camera. A linear response range from 1 ppmv to 7 ppmv was found for both sensors, and the detection limits were 0.95 ppmv (1.2 % RSD) and 0.40 ppmv (0.8 % RSD) for Cellu-PANI and Nylon-NPs PANI, respectively. In addition, both sensors showed complete reversibility and a short exposition time (5 min). The potential applicability of the Color-NSPs in the control of the exposure of paper heritage collections to outdoor- and indoor-generated gaseous pollutants was demonstrated by determining acid vapors in museums. The method was validated with an external reference method; the paired test was applied, and p-values greater than 5% were obtained, indicating an excellent correlation and showing that the Color-NSPs reported are simple, fast, and an economical alternative to control and protect cultural heritage materials in indoor environments.

Aspergillus verrucosus sp. nov., a xerophilic species isolated from house dust and honey in Japan.

Three strains of a xerophilic Aspergillus species were isolated from house dust and honey in Japan. A molecular phylogenetic analysis based on the combined dataset for four regions (internal transcribed spacer rDNA, calmodulin, ß-tubulin, and RNA polymerase II second largest subunit) revealed that the strains formed an independent lineage, sister to Aspergillus halophilicus classified in section Restricti. Morphological comparisons show that the strains differ from A. halophilicus in three aspects: (i) the size of cleistothecia, as well as the surface structure and size of ascospores, (ii) the ability to grow on Harrold's agar and dichloran 18 % glycerol agar, and (iii) the lack of conidiophore formation on potato dextrose agar +20 % NaCl. These strains could be clearly distinguished from all known Aspergillus section Restricti species. Therefore, we consider it to be a novel species and propose the name Aspergillus verrucosus sp. nov. (NBRC 115547T).

Mold and Mycotoxin Exposure and Brain Disorders.

Gene-environment interaction is an emerging hypothesis to explain the increased incidence of neurological disorders. In this context, the health and clinical effects of exposure to air pollutants have received increasing attention. One of these pollutants is the growth of fungi and molds in the form of multicellular filaments, known as hyphae. Fungi and molds not only grow in outdoor environments, but they also thrive indoors with excessive moisture, producing mycotoxins. Mold enters the body through the nose via the olfactory neurons, which directly communicate with the brain. Mycotoxins induce toxicological effects similar to those associated with brain disorders such as oxidative stress and inflammation. One mold species can produce several different mycotoxins, and one mycotoxin can be produced by several different molds. Even a small amount of mold growth in the air conditioners and their ducts or the panels inside the buildings and even the cars cause the occupants to be chronically exposed to and constantly inhaling spores and mycotoxins, which causes illness. In this review, we focused on mold and mycotoxin exposure and brain disorders.

Children's Attentional Processes in Outdoor and Indoor Environments: The Role of Physiological Self-Regulation.

Previous research has documented that exposure to green spaces has the beneficial effects of attention restoration and stress reduction. This study investigated the effects of indoor (classroom) and outdoor (green school garden) environments on attentional processes in interaction with emotion and physiological self-regulation. Children in third and fourth grades (n = 42) completed a school-related emotional Stroop task assessing the effects of outdoor and indoor classroom backgrounds when facing positive and negative stimuli. Children's attentional patterns in a task completed in both environments were also assessed. Heart rate variability was registered at rest as an index of physiological self-regulation. The results revealed that children were less distracted from negative emotional materials when presented with outdoor compared with indoor background stimuli. Greater selective attention and sustained attention were shown in the green than in the classroom environment. Moreover, sustained attention varied in relation to physiological self-regulation but only when performing the task indoor.

Multi-person movement-induced airflow and the effects on virus-laden expiratory droplet dispersion in indoor environments.

The multi-person movement might cause complex induced airflow and affect the virus-laden expiratory droplet transmission in indoor environments. Using the dynamic mesh model in computational fluid dynamics, the multi-person movement with different personnel location distributions was realized. The induced airflow patterns, virus-laden droplet dispersion, and concentration distribution were investigated in detail. The results show that multi-person movement might intensify inter-regional convection, which has been rarely found in single-person movement conditions. Side-by-side distribution and ladder distribution of moving persons could cause a connected low-pressure area behind the moving persons, which might enhance lateral virus transport, especially where droplets might suspend at the height of the breathing zone. Not only 1-10 µm aerosols but also some 20-50 µm droplets are carried by the multi-person movement-induced airflow to over 3 m. Since the width of induced airflow is about 0.6-1.0 m, moving persons should keep enough horizontal distance (>1.0 m) to limit the air mixing and virus-laden droplet transmission. This paper could provide a detailed reference for the numerical study of multi-person movement-induced airflow patterns, droplet dispersion, and indoor infection control.

Ventilation reconstruction in bathrooms for restraining hazardous plume: Mitigate COVID-19 and beyond.

Converging evidence reports that the probability of vertical transmission patterns via shared drainage systems, may be responsible for the huge contactless community outbreak in high-rise buildings. Publications indicate that a faulty bathroom exhaust fan system is ineffective in removing lifted hazardous virus-laden aerosols from the toilet bowl space. Common strategies (boosting ventilation capability and applying disinfection tablets) seem unsustainable and remain to date untested. Using combined simulation and experimental approaches, we compared three ventilation schemes in a family bathroom including the traditional ceiling fan, floor fan, and side-wall fan. We found that the traditional ceiling fan was barely functional whereby aerosol particles were not being adequately removed. Conversely, a side-wall fan could function efficiently and an enhanced ventilation capability can have increased performance whereby nearly 80.9% of the lifted aerosol particles were removed. There exists a common, and easily-overlooked mistake in the layout of the bathroom, exposing occupants to a contactless vertical pathogen aerosol transmission route. Corrections and dissemination are thus imperative for the reconstruction of these types of family bathrooms. Our findings provide evidence for the bathroom and smart ventilation system upgrade, promoting indoor public health and human hygiene.