Single cell-inductively coupled plasma-mass spectrometry (SC-ICP-MS) reveals metallic heterogeneity in a macrophage model of infectious diseases.

Single cell-inductively coupled plasma-mass spectrometry (SC-ICP-MS) offers an attractive option for rapidly measuring trace metal heterogeneity at the single cell level. Chemical fixation has been previously applied to mammalian cells prior to sample introduction so that they can be resuspended in a solution suitable for SC-ICP-MS. However, the effect of fixation on the elemental composition of suspended cells is unknown, and robust methodologies are urgently needed so that the community can measure the effects of intracellular pathogens on elemental composition of their host cells. We demonstrate that different fixatives impact measured cell elemental composition. We have compared suspensions treated using different fixatives (methanol 60-100% in H2O and 4% paraformaldehyde in phosphate-buffered saline solution), and the number of distinguishable single cell events, keeping a constant particle number concentration. Significantly more single cell events (n = 3, P ≤ 0.05) were observed for Ca and Mg when cells were fixed in 4% paraformaldehyde than for the methanol-based fixatives, confirming the hypothesis that methanol fixatives cause leaching of these elements from the cells. The impact of fixation on Mn and Zn was less pronounced. Microbial and viral infection of eukaryotic cells can have profound effects on their elemental composition, but chemical fixation is necessary to render infected cells safe before analysis. We have successfully applied our methodology to a macrophage model of tuberculosis demonstrating utility in understanding metal homeostasis during microbial infection of mammalian cells.

[Determination of 22 elements in whole blood by inductively coupled plasma mass spectrometry].

Objective: To establish a method for the simultaneous determination of 22 elements, including beryllium, vanadium, chromium, manganese, iron, calcium, magnesium, barium, cobalt, cadmium, copper, zinc, arsenic, selenium, titanium, strontium, nickel, molybdenum, tin, antimony, thallium and lead, in whole blood by inductively coupled plasma mass spectrometry (ICP-MS) . Methods: In September 2023, the analysis conditions were determined by optimizing the detection mode of the instrument, the pretreatment mode and the dilution factor of the samples, etc. Whole blood samples were diluted with a mixture of 0.1% nitric acid and 0.05% triton X-100, and centrifuged at 2000 r/min by high-speed centrifuge for 2 min. The supernatant was taken into inductively coupled plasma mass spectrometer to determine the content of 22 elements, and the detection limit and precision of the method were analyzed. Results: The 22 elements had a good linear relationship in their respective measurement ranges (r=0.9991-0.9999), the detection limit ranged from 0.003 µg/L to 0.012 mg/L. The intra-batch precision ranged from 0.5% to 7.2%, the inter-batch precision ranged from 0.4% to 9.4%, and the average recoveries ranged from 80.6% to 114.9%. Conclusion: ICP-MS method has a good effect on the determination of 22 elements in whole blood. The method is fast and simple, and can be used for clinical detection of multiple elements in whole blood.

Trace and Minor Element Analysis of Azurite Blues in Fine Arts: Possibilities and Limitations in Provenance Studies.

Azurite, a historical blue mineral pigment, has previously been described to contain certain elemental impurities. These may originate from host rocks, vein fillings, or the primary copper ore mineralization. In this study, azurites (and also green malachites) from three important Central European deposits with a potential of being exploited for pigment usage already in the Middle Ages have been studied, together with azurite from Chessy, France, with a different geological setting. Using electron probe microanalysis and, more importantly, laser ablation inductively coupled plasma mass spectroscopy for trace elemental analysis, several indicators were pinpointed as important for provenance: characteristic elemental fingerprint of the deposit, e.g., elevated lead (Pb) in combination with rare earth elements, may be combined with zinc (Zn)/arsenic (As) ratio (indicating sources of excess Zn in the primary deposit) and the overall amount of metal impurities (suggesting the source mineral of copper for azurite formation). In addition, malachites from the same deposits were found to preferentially incorporate primary ore metal elements as well as Cd, Mg, Mn, or U. Therefore, if azurite pigment contains an elevated amount of malachite as an impurity, it may significantly influence the overall elemental composition. The results obtained on geological samples were applied to two micro-samples of works of art containing azurite-rich layers originating from the 13th-14th and 16th centuries. It was shown that it is highly beneficial to focus on the overall trace elemental composition of the paint layer and not on the admixed mineral grains, as their presence, especially in minute micro-samples, is largely accidental and thus not representative. Although a higher number of samples need to be studied in the future, the newly described criteria made it possible to exclude some of the localities of the employed azurite pigment. This confirmed the key importance of trace elements analysis of mineral pigments for the provenance studies of fine arts.

A quantitative method for aquaporin-1 protein using magnetic preconcentration and probe-based immunoassay coupling to inductively coupled plasma mass spectrometry in urine analysis.

BACKGROUND: Aquaporin-1 (AQP1) protein plays a crucial role in intracellular and extracellular water homeostasis and fluid transport in organs and tissues associated with diverse life activities and is extremely abundant in the kidney. Accurate detection of AQP1 in urine can be applied as screening of early-stage disease. Application of magnetic preconcentration and probe-based signal amplification strategy coupling to inductively coupled plasma mass spectrometry (ICP-MS) is a more accurate, sensitive and specific detection method for AQP1 in complex biological samples compared to conventional methods. RESULTS: We described an element-labelling strategy based on magnetic preconcentration and probe-based immunoassay coupling to ICP-MS detection. The magnetic beads (MBs) modified with epoxy groups were capable of enriching AQP1 proteins and separating them from complex matrices. The probe constructed by conjugating anti-AQP1 antibody molecules on the surface of gold nanoparticles could specifically recognize AQP1 proteins attached on MBs and be analyzed by ICP-MS. The concentration of AQP1 protein could be precisely quantified and amplified by 14,000 times through the corresponding signal of Au atoms. This assay for AQP1 protein quantification achieved a detection limit down to 0.023 ng mL-1, a broad linear calibration curve between 0.3 ng mL-1 and 30 ng mL-1, as well as outstanding specificity. SIGNIFICANCE: The proposed method was successfully applied to detect AQP1 protein in human urine samples, showing the potential for its applications concerning accurate AQP1 quantification. It can also screen a wide range of proteins provided the antibodies specific to these target proteins are available.

3D-printed thermally expanded monolithic foam for solid-phase extraction of multiple trace metals.

Digital light processing (DLP) 3DP, commercial acrylate-based photocurable resins, and thermally expandable microspheres-incorporated flexible photocurable resins were employed to fabricate an SPE column with a thermally expanded monolithic foam for extracting Mn, Co, Ni, Cu, Zn, Cd, and Pb ions prior to the determination using inductively coupled plasma mass spectrometry. After optimization of the thermally activated foaming, the design and fabrication of the SPE column, and the automatic analytical system, the DLP 3D-printed SPE column with the thermally expanded monolithic foam extracted the metal ions with up to 14.8-fold enhancement (relative to that without incorporating the microspheres), with absolute extraction efficiencies all higher than 95.6%, and method detection limits in the range from 0.5 to 5.2 ng L-1. We validated the reliability and applicability of this method by determination of the metal ions in several reference materials (CASS-4, SLRS-5, 1643f, and Seronorm Trace Elements Urine L-2) and spiked seawater, river water, ground water, and human urine samples. The results illustrated that to incorporate the thermally expandable microspheres into the photocurable resins with a post-printing heating treatment enabled the DLP 3D-printed thermally expanded monolithic foam to substantially improve the extraction of the metal ions, thereby extending the applicability of SPE devices fabricated by vat photopolymerization 3DP techniques.

Trace rare earth elements analysis in atmospheric particulates and cigar smoke by ICP-MS after pretreatment with magnetic polymers.

BACKGROUND: Some heavy metals could be ingested into human body through breathing besides diet and drinking. Atmospheric particulates and smoke are main sources of this kind for the metals' exposure to human. Compared with environmental water, the methodologies for trace metals in particulates and smoke samples with more complex matrix are much less. Magnetic functional sorbents can be designed to remove complex matrix and enrich target analytes. The combination of magnetic solid phase extraction (MSPE) with highly sensitive inductively coupled plasma mass spectrometry (ICP-MS) detection is a good alternative for the analytical purpose. (92). RESULTS: Magnetic polymers were synthesized through free radical polymerization with Fe3O4 nanoparticles as the core and 2-methyl-2-hydroxyethyl 2-acrylate-2-hydroxyethyl ester phosphate as external modifier. The sorbent showed a high phosphorus content (2.7 wt%) and good selectivity to target REEs, along with good reusability (at least 45 times) and chemical stability. With the consumption of 150 mL aqueous solution, an enrichment factor of 300 was obtained by the proposed method, leading to low detection limits (0.001-0.2 ng L-1) for 15 REEs. The application potential of the method was further evaluated by analyzing local atmospheric particulate and cigar smoke samples. Recovery of 86.3-107 % in digested total suspended particulate (TSP) was obtained for 15 REEs, demonstrating a good anti-interference ability of the method. Target REEs in TSP, PM2.5 and PM10 samples were found to be 0.01-2.81, 0.006-1.09 and 0.009-2.46 ng m-3, respectively, and none of them were detected in the collected cigar smoke. (148) SIGNIFICANCE: The method of MSPE-ICP-MS was demonstrated with good potential for trace analysis in complex sample matrix, probably due to the good selectivity of the functionalized polymers. With the design and fabrication of specific functionalized magnetic sorbents, other heavy metals can be monitored in those samples which would be intake by human breathing. It provided an efficient strategy for the evaluation of metals' health risk in particulates and smoke samples. (69).

Auranofin is lethal against feline Tritrichomonas foetus in vitro but ineffective in cats with naturally occurring infection.

Protozoal diarrhea caused by Tritrichomonas foetus (blagburni) is a prevalent, lifelong, and globally distributed burden in domestic cats. Treatment is limited to the use of 5-nitroimidazoles and treatment failure is common. The repurposed gold salt compound auranofin has killing activity against diverse protozoa in vitro but evidence of efficacy in naturally occurring protozoal infections is lacking. This exploratory study investigated the efficacy and safety of auranofin for treatment of cats with naturally occurring, 5-nitroimidazole-resistant, T. foetus infection. The minimum lethal concentration (MLC) of auranofin against 5 isolates of feline T. foetus was determined under aerobic conditions in vitro. Healthy cats and cats with T. foetus infection were treated with immediate release auranofin (range, 0.5-3 mg/cat for 7 days) or guar gum-coated auranofin capsules (0.5 or 3 mg/cat for 7 days). Adverse effects were monitored by clinical signs and clinicopathologic testing. Efficacy was determined by fecal consistency score, bowel movement frequency, and single-tube nested PCR of feces for T. foetus rDNA. Fecal samples were assayed for concentrations of auranofin, known and predicted metabolites of auranofin, gold containing molecules, and total gold content using HPLC, LC-MS, ion mobility-MS, and ICP-MS, respectively. Auranofin was effective at killing isolates of feline T. foetus at MLC ≥ 1 µg/ml. Treatment of cats with T. foetus infection with either immediate release auranofin or a colon-targeted guar gum-coated tablet of auranofin did not eradicate infection. Treatment failure occurred despite fecal concentrations of gold that met or exceeded the equivalent MLC of auranofin. Neither auranofin, known or predicted metabolites of auranofin, nor any gold-containing molecules >100 Da could be detected in fecal samples of treated cats. Adverse effects associated with auranofin treatment were common but minor. These studies identify that in vitro susceptibility test results of auranofin may not translate to treatment effectiveness in vivo even when achieving gold concentrations equivalent to the MLC of auranofin in the target environment. These studies further establish the absence of any predicted or unpredicted gold containing metabolites in feces after oral administration of auranofin.

Fabrication of a Microfluidic-Based Device Coated with Polyelectrolyte-Capped Titanium Dioxide to Couple High-Performance Liquid Chromatography with Inductively Coupled Plasma Mass Spectrometry for Mercury Speciation.

Mercury (Hg) is a toxic element which impacts on biological systems and ecosystems. Because the toxicity of Hg species is highly dependent on their concentration levels and chemical forms, the sensitive identification of the chemical forms of Hg-i.e., Hg speciation-is of major significance in providing meaningful information about the sources of Hg exposure. In this study, a microfluidic-based device made of high-clarity poly(methyl methacrylate) (PMMA) was fabricated. Then, titanium dioxide nanoparticles (nano-TiO2s) were attached to the treated channel's interior with the aid of poly(diallyldimethylammonium chloride) (PDADMAC). After coupling the nano-TiO2-coated microfluidic-based photocatalyst-assisted reduction device (the nano-TiO2-coated microfluidic-based PCARD) with high-performance liquid chromatography (HPLC) and inductively coupled plasma mass spectrometry (ICP-MS), a selective and sensitive, hyphenated system for Hg speciation was established. Validation procedures demonstrated that the method could be satisfactorily applied to the determination of mercury ions (Hg2+) and methylmercury ions (CH3Hg+) in both human urine and water samples. Remarkably, the zeta potential measured clearly indicated that the PDADMAC-capped nano-TiO2s with a predominance of positive charges indeed provided a steady force for firm attachment to the negatively charged device channel. The cause of the durability of the nano-TiO2-coated microfluidic-based PCARD was clarified thus.

Comparison of the In Vitro Iron Bioavailability of Tempeh Made with Tenebrio molitor to Beef and Plant-Based Meat Alternatives.

Iron is an essential mineral that supports biological functions like growth, oxygen transport, cellular function, and hormone synthesis. Insufficient dietary iron can lead to anemia and cause fatigue, cognitive impairment, and poor immune function. Animal-based foods provide heme iron, which is more bioavailable to humans, while plant-based foods typically contain less bioavailable non-heme iron. Edible insects vary in their iron content and may have heme or non-heme forms, depending on their diet. Edible insects have been proposed as a protein source that could address issues of food insecurity and malnutrition in low resource contexts; therefore, it is important to understand the bioavailability of iron from insect-based foods. In this study, we used Inductively Coupled Plasma and Mass Spectrometry (IPC-MS) and Caco-2 cell culture models to compare the soluble and bioavailable iron among five different lab-produced tempeh formulations featuring Tenebrio molitor (mealworm) with their non-fermented raw ingredient combinations. Finally, we compared the iron bioavailability of a mealworm tempeh with two sources of conventional beef (ground beef and sirloin steaks) and two commercially available plant-based meat alternatives. The results show that while plant-based meat alternatives had higher amounts of soluble iron, particularly in the Beyond Burger samples, the fermented mealworm-based tempeh had greater amounts of bioavailable iron than the other samples within the set. While all the samples presented varying degrees of iron bioavailability, all products within the sample set would be considered good sources of dietary iron.

Introduction of a spectrophotometric method for salivary iodine determination on microplate based on Sandell-Kolthoff reaction.

BACKGROUND: Iodine is an essential element for the synthesis of thyroid hormones. Therefore, a reliable marker of iodine supply is important. Iodine is predominantly excreted via kidneys, but also via salivary glands. Our aim was to introduce a new and simple method for determination of salivary iodine concentration (SLIC). MATERIALS AND METHODS: Self-prepared chemicals and standards for Sandell-Kolthoff reaction on microplate with ammonium peroxydisulfate (AP) in the range 0-400 µg/L were used. Suitability of water-based standards (WBS) and artificial saliva-based standards (ASS) for standard curve were tested. We followed standards for method validation, defined concentration of used AP and compared our results with Inductively Coupled Plasma Mass Spectrometry (ICP-MS). RESULTS: WBS gave more reliable results than ASS as an underestimation of iodine concentration was found for ASS. LoB was 6.5 µg/L, LoD 12.0 µg/L, therefore analytical range was 12-400 µg/L. Intra- and inter-assay imprecisions at iodine concentrations, namely 20, 100, 165, and 350 µg/L were 18.4, 5.1, 5.7, and 2.8%, respectively, and 20.7, 6.7, 5.1, and 4.3%, respectively. Suitable molarity of AP was 1.0 mol/L and showed no difference to 1.5 mol/L (P values for samples with concentration 40, 100, and 150 µg/L, were 0.761, 0.085, and 0.275, respectively), whereas there was a significant change using 0.5 mol/L (P<0.001). Saliva samples could be diluted up to 1:8. There was no interference of thiocyanate and caffeine up to 193.5 mg/L. Our original method was comparable to ICP-MS. Spaerman coefficient was 0.989 (95% CI: 0.984-0.993). CONCLUSIONS: The new method for SLIC determination is in excellent agreement with ICP-MS and easy-to-use.

Serum macroelements and microelements levels in periparturient dairy cows in relation to fatty liver diseases.

BACKGROUND: Fatty liver in dairy cows is a common metabolic disease defined by triglyceride (TG) buildup in the hepatocyte. Clinical diagnosis of fatty liver is usually done by liver biopsy, causing considerable economic losses in the dairy industry owing to the lack of more effective diagnostic methods. Therefore, this study aimed to investigate the potential utility of blood biomarkers for the diagnosis and early warning of fatty liver in dairy cows. RESULTS: A total of twenty-four lactating cows within 28 days after parturition were randomly selected as experimental animals and divided into healthy cows (liver biopsy tested, n = 12) and cows with fatty liver (liver biopsy tested, n = 12). Inductively coupled plasma mass spectrometry (ICP-MS) was used to determine the macroelements and microelements in the serum of two groups of cows. Compared to healthy cows (C), concentrations of calcium (Ca), potassium (K), magnesium (Mg), strontium (Sr), selenium (Se), manganese (Mn), boron (B) and molybdenum (Mo) were lower and copper (Cu) was higher in fatty liver cows (F). Meanwhile, the observed differences in macroelements and microelements were related to delivery time, with the greatest major disparity between C and F occurring 7 days after delivery. Multivariable analysis was used to test the correlation between nine serum macroelements, microelements and fatty liver. Based on variable importance projection and receiver operating characteristic (ROC) curve analysis, minerals Ca, Se, K, B and Mo were screened as the best diagnostic indicators of fatty liver in postpartum cows. CONCLUSIONS: Our data suggested that serum levels of Ca, K, Mg, Se, B, Mo, Mn, and Sr were lower in F than in C. The most suitable period for an early-warning identification of fatty liver in cows was 7 days after delivery, and Ca, Se, K, B and Mo were the best diagnostic indicators of fatty liver in postpartum cows.

Metallomic analysis of brain tissues distinguishes between cases of dementia with Lewy bodies, Alzheimer's disease, and Parkinson's disease dementia.

Background: Dementia with Lewy bodies (DLB) can be difficult to distinguish from Alzheimer's disease (AD) and Parkinson's disease dementia (PDD) at different stages of its progression due to some overlaps in the clinical and neuropathological presentation of these conditions compared with DLB. Metallomic changes have already been observed in the AD and PDD brain-including widespread decreases in Cu levels and more localised alterations in Na, K, Mn, Fe, Zn, and Se. This study aimed to determine whether these metallomic changes appear in the DLB brain, and how the metallomic profile of the DLB brain appears in comparison to the AD and PDD brain. Methods: Brain tissues from ten regions of 20 DLB cases and 19 controls were obtained. The concentrations of Na, Mg, K, Ca, Zn, Fe, Mn, Cu, and Se were determined using inductively coupled plasma-mass spectrometry (ICP-MS). Case-control differences were evaluated using Mann-Whitney U tests. Results were compared with those previously obtained from AD and PDD brain tissue, and principal component analysis (PCA) plots were created to determine whether cerebral metallomic profiles could distinguish DLB from AD or PDD metallomic profiles. Results: Na was increased and Cu decreased in four and five DLB brain regions, respectively. More localised alterations in Mn, Ca, Fe, and Se were also identified. Despite similarities in Cu changes between all three diseases, PCA plots showed that DLB cases could be readily distinguished from AD cases using data from the middle temporal gyrus, primary visual cortex, and cingulate gyrus, whereas DLB and PDD cases could be clearly separated using data from the primary visual cortex alone. Conclusion: Despite shared alterations in Cu levels, the post-mortem DLB brain shows very few other similarities with the metallomic profile of the AD or PDD brain. These findings suggest that while Cu deficiencies appear common to all three conditions, metal alterations otherwise differ between DLB and PDD/AD. These findings can contribute to our understanding of the underlying pathogenesis of these three diseases; if these changes can be observed in the living human brain, they may also contribute to the differential diagnosis of DLB from AD and/or PDD.

The Combined ICP-MS, ESEM-EDX, and HAADF-STEM-EDX Approach for the Assessment of Metal Sub-Micro- and Nanoparticles in Wheat Grain.

Metal sub-microparticles (SMPs) and nanoparticles (NPs) presence in food is attributable to increasing pollution from the environment in raw materials and finished products. In the present study, a multifaceted analytical strategy based on Environmental Scanning Electron Microscopy and High-Angle Annular Dark-Field-Scanning Transmission Electron Microscopy coupled with Energy-Dispersive X-ray Spectroscopy (ESEM-EDX, HAADF-STEM-EDX) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS) was proposed for the detection and characterization of metal and metal-containing SMPs and NPs in durum wheat samples, covering a size measurement range from 1 nm to multiple µm. ESEM-EDX and ICP-MS techniques were applied for the assessment of SMP and NP contamination on the surface of wheat grains collected from seven geographical areas characterized by different natural and anthropic conditions, namely Italy, the USA, Australia, Slovakia, Mexico, Austria, and Russia. ICP-MS showed significant differences among the mean concentration levels of metals, with the USA and Italy having the highest level. ESEM-EDX analysis confirmed ICP-MS concentration measurements and measured the highest presence of particles < 0.8 µm in size in samples from Italy, followed by the USA. Less marked differences were observed when particles < 0.15 µm were considered. HAADF-STEM-EDX was applied to a selected number of samples for a preliminary assessment of internal contamination by metal SMPs and NPs, and to expand the measurable particle size range. The multifaceted approach provided similar results for Fe-containing SMPs and NPs. ICP-MS and ESEM-EDX also highlighted the presence of a significant abundance of Ti- and Al-containing particles, while for STEM-EDX, sample preparation artifacts complicated the interpretation. Finally, HAADF-STEM-EDX results provided relevant information about particles in the low nm range, since, by applying this technique, no particles smaller than 50 nm were observed in accordance with ESEM-EDX.

Elemental Profiling for the Detection of Food Mixtures: A Proof of Principle Study on the Detection of Mixed Walnut Origins Using Measured and Calculated Data.

Element profiling is a powerful tool for detecting fraud related to claims of geographical origin. However, these methods must be continuously developed, as mixtures of different origins in particular offer great potential for adulteration. This study is a proof of principle to determine whether elemental profiling is suitable for detecting mixtures of the same food but from different origins and whether calculated data from walnut mixtures could help to reduce the measurement burden. The calculated data used in this study were generated based on measurements of authentic, unadulterated samples. Five different classification models and three regression models were applied in five different evaluation approaches to detect adulteration or even distinguish between adulteration levels (10% to 90%). To validate the method, 270 mixtures of walnuts from different origins were analyzed using inductively coupled plasma mass spectrometry (ICP-MS). Depending on the evaluation approach, different characteristics were observed in mixtures when comparing the calculated and measured data. Based on the measured data, it was possible to detect admixtures with an accuracy of 100%, even at low levels of adulteration (20%), depending on the country. However, calculated data can only contribute to the detection of adulterated walnut samples in exceptional cases.

Accurate non-ceruloplasmin bound copper: a new biomarker for the assessment and monitoring of Wilson disease patients using HPLC coupled to ICP-MS/MS.

OBJECTIVES: Assessment of Wilson disease is complicated, with neither ceruloplasmin, nor serum or urine copper, being reliable. Two new indices, accurate non-ceruloplasmin copper (ANCC) and relative ANCC were developed and applied to a cohort of 71 patients, as part of a Wilson Disease Registry Study. METHODS: Elemental copper-protein speciation was developed for holo-ceruloplasmin quantitation using strong anion exchange chromatography coupled to triple quadrupole inductively coupled plasma mass spectrometry. The serum proteins were separated using gradient elution and measured at m/z 63 (63Cu+) and 48 (32S16O+) using oxygen reaction mode and Cu-EDTA as calibration standard. The ANCC was calculated by subtraction of the ceruloplasmin bound copper from the total serum copper and the RelANCC was the percentage of total copper present as the ANCC. RESULTS: The accuracy of the holo-ceruloplasmin measurement was established using two certified reference materials, giving a mean recovery of 94.2 %. Regression analysis between the sum of the copper containing species and total copper concentration in the patient samples was acceptable (slope=0.964, intercept=0, r=0.987) and a difference plot, gave a mean difference for copper of 0.38 µmol/L. Intra-day precision for holo-ceruloplasmin at serum copper concentrations of 0.48 and 3.20 µmol/L were 5.2 and 5.6 % CV and the intermediate precision at concentrations of 0.80 and 5.99 µmol/L were 6.4 and 6.4 % CV, respectively. The limit of detection (LOD) and lower limit of quantification (LLOQ) for holo-ceruloplasmin were 0.08 and 0.27 µmol/L as copper, respectively. CONCLUSIONS: ANCC and Relative ANCC are important new diagnostic and monitoring biomarker indices for Wilson disease (WD).

Improved method for quantification of intact oxaliplatin by ultra high performance liquid chromatography-inductively coupled plasma mass spectrometry: Applications to clinical and speciation studies.

Interest is increasing in the use of different liquid chromatography techniques coupled online to mass spectrometry for the quantification of platinum anticancer drugs in human plasma to inform cancer chemotherapy. We developed, validated and studied the application of a method for quantification of intact oxaliplatin in human plasma using ultra high performance liquid chromatography hyphenated to inductively coupled plasma mass spectrometry (UHPLC-ICP-MS). Plasma samples were processed instantly after collection from patients to preserve oxaliplatin speciation by methanol-deproteinization, and storage of diluted supernatants (plasma:methanol 1:2 v/v) at -80 °C. UHPLC separation of intact oxaliplatin and internal standard (carboplatin) was achieved using a C18 column and linear gradient mobile phase (Mobile phase A: water-methanol (97:3 v/v), 0.075 mM sodium dodecyl sulfate, 9.79 nM thallium adjusted to pH 2.5 with trifluoromethanesulfonic acid; Mobile phase B: 100 % methanol (v/v)) with ICP-MS detection to monitor platinum and thallium at m/z 195 and 205, respectively. The limit of quantification was 50 nM in methanol-deproteinized diluted plasma (1:2 v/v). Linearity was established for calibration standards ranging from 50 to 500 nM made in methanol-deproteinized diluted plasma (1:2 v/v), and for dilution of higher concentration samples in blank matrix containing internal standard (final dilution 1:29 v/v). Intra-day and inter-day accuracy ranged from 96.8 to 103 % of nominal concentration and precision from 0.62 to 2.49 % coefficient of variation. Recovery was complete and a matrix effect confirmed the requirement for matrix-matched standards. Intact oxaliplatin was stable during storage for at least 473 days, and during analysis, in methanol-deproteinized diluted plasma (1:2 v/v). The method was applied to determining the plasma concentrations of intact oxaliplatin in patients undergoing cancer chemotherapy, and studies of oxaliplatin degradation in vitro. This improved method based on UHPLC-ICP-MS will allow more specific, efficient and reliable quantification of intact oxaliplatin in human plasma.

Dielectric barrier discharge-induced chemical vapor generation for highly sensitive analysis of iodine in seawater by ICP-MS.

BACKGROUND: The accurate determination of iodine in seawater is essential to understanding its impact on the environment and human health. Inductively coupled plasma mass spectrometry (ICP-MS) is a widely used technique for elemental analysis due to its high sensitivity, speed, and low limit of detection (LOD). However, its capability in the detection of iodine in complex matrix samples is still limited by the low sample introduction efficiency of pneumatic nebulization and the high ionization energy of iodine. Dielectric barrier discharge microplasma-induced vapor generation (DBD-µPIVG) is a sample introduction technique that has been widely coupled with atomic spectrometry due to its high vapor generation efficiency, rapid reaction speed, high anti-interference capability, and environmental friendliness. RESULTS: A new method was developed for the rapid and sensitive determination of iodine using DBD-µPIVG coupled with ICP-MS. The DBD-µPIVG sample introduction technique can convert both iodide and iodate to their volatiles with a vapor generation efficiency of 70 %. The experimental conditions were optimized in detail, and the LOD for iodine was 0.04 µg L-1, which was lower compared to pneumatic nebulization and comparable to that after the extraction treatment. The relative standard deviation (RSD) obtained after 11 replicate determinations was 2.4%. Furthermore, the potential mechanism and anti-interference performance of the proposed method were also carefully investigated. SIGNIFICANCE: Compared to other analytical methods for iodine analysis, this approach is environmentally friendly, exhibits high anti-interference capability and enables accurate determination of iodine in complex matrix samples. The high vapor generation efficiency of DBD-µPIVG improves the sensitivity for iodine detection and expands the applicable elemental range of DBD-µPIVG. Finally, the proposed method was successfully applied to analyze the iodine content in seawater samples obtained from the Chinese coastal waters and retains great potential for assessing the distribution of iodine in different sea areas.

Evaluating the portable X-ray fluorescence reliability for metal(loid)s detection and soil contamination status.

Marginalized communities experience barriers that can prevent soil monitoring efforts and knowledge transfer. To address this challenge, this study compared two analytical methods: portable X-ray fluorescence spectroscopy (pXRF, less time, cost) and inductively coupled plasma mass spectrometry (ICP-MS, "gold standard"). Surface soil samples were collected from residential sites in Arizona, USA (N = 124) and public areas in Troy, New York, USA (N = 33). Soil preparation differed between groups to account for community practice. Statistical calculations were conducted, paired t test, Bland-Altman plot, and a two-way ANOVA indicated no significant difference for As, Ba, Ca, Cu, Mn, Pb, and Zn concentrations except for Ba in the t test. Iron, Ni, Cr, and K were statistically different for Arizona soils and V, Ni, Fe, and Al concentrations were statistically different for New York soils. Zinc was the only element with high R2 and low p value. Pollution load index (PLI), enrichment factors (EF), and geo-accumulation index (Igeo) were calculated for both methods using U.S. Geological Survey data. The PLI were > 1, indicating soil pollution in the two states. Between pXRF and ICP-MS, the Igeo and EF in Arizona had similar degree of contamination for most elements except Zn in garden and Pb in yard, respectively. For New York, the Igeo of As, Cu, and Zn differed by only one classification index between the two methods. The pXRF was reliable in determining As, Ba, Ca, Cu, Mn, Pb, and Zn in impacted communities. Therefore, the pXRF can be a cost-effective alternative to using ICP-MS techniques to screen soil samples for several environmentally relevant contaminants to protect environmental public health.

[Quality control mode between Lonicera macranthoides and L. japonica based on multi-elemental difference through inductively coupled plasma mass spectrometry].

Numerous studies show that Lonicera macranthoides and L. japonica have significant differences in organic matter. However, there is still a lack of research on inorganic elements between them. In this study, a non-targeted elemental metabolomics method was established by inductively coupled plasma mass spectrometry(ICP-MS), so as to compare the overall differences of inorganic elements between L. macranthoides and L. japonica. In addition, the differential markers were screened, and these differential markers were quantitatively analyzed by the targeted method. The non-targeted elemental metabolomics showed that the established mathematical model could reflect the difference in element content between L. macranthoides and L. japonica. Four inorganic elements such as ~(55)Mn, ~(209)Bi, ~(111)Cd, and ~(85)Rb were confirmed as the differential markers of L. macranthoides and L. japonica based on the screening principles of variable importance in the projection(VIP) value>2.0, P<0.01 and fold change(FC) value>1.2 or <0.80. The targeted quantitative results showed that the content of ~(209)Bi in L. japonica was significantly higher than that in L. macranthoides, while ~(55)Mn, ~(111)Cd, and ~(85)Rb in L. macranthoides were significantly higher than that in L. japonica. The non-targeted and targeted elemental metabolomics methods based on ICP-MS can significantly reflect the overall differences in inorganic elements between L. macranthoides and L. japonica. Exploring the differences between them from the perspective of elements can partly reflect the differences in their drug properties and lay a foundation for further study on the quality control mode of inorganic elements in L. macranthoides and L. japonica and their pharmacological effects.

Size and isotope analysis of individual nanoparticles by multi-collector ICP-MS using "event-triggered signal capture" with a high-speed oscilloscope.

Accurate quantitative elemental and isotope analysis of nanoparticles at the single-particle level is crucial for better understanding their origin, properties and behaviors. Single particle inductively coupled plasma-mass spectrometry (spICP-MS) has emerged as a promising technique for nanoparticle analysis. However, challenges persist in obtaining accurate and consistent element profiles and ratios for small-sized nanoparticles by conventional quadrupole (QMS) or time-of-flight mass analyzers (TOF-MS) due to their low level and transient nature. In this paper, we present a novel analytical method for single nanoparticle analysis using multiple collector ICP-MS (MC-ICP-MS) combined with a modern high-speed digital oscilloscope. The single particle events are acquired using an "event-triggered signal capture" (ETSC) technique, which enables the simultaneously capture and visualization of multiple isotopes of transient individual particle profiles with nanosecond time resolution. This greatly facilitates precise and efficient analysis of nanoparticles. The minimum detectable particle size is calculated to be as small as 8 nm (∼1 ag 109Ag) for AgNPs. Based on the 109/107Ag ratios obtained from 2000 particles, the precisions of 109/107Ag ratio measurements on 20 nm, 40 nm, 60 nm, 80 nm and 100 nm were approximately 0.086 (SD), 0.063 (SD), 0.051 (SD), 0.040 (SD), and 0.029 (SD), which is limited by counting statistics of the isotopic signals. Furthermore, the achieved standard error of 109/107Ag can be reduced to sub-permil level (0.7 ‰) even for the measurement of 20 nm AgNPs (N = 17,000). These results demonstrate that the ETSC provides a unique method for isotope analysis of single particles, holding great potential for enhancing our understanding of nanoparticles.