Mechanochemical synthesis of corannulene flanked N-heterocyclic carbene (NHC) precursors and preparation of their metal complexes.

The synthesis of new compounds is an important pillar for the advancement of the field of chemistry and adjacent fields. In this regard, over the last decades huge efforts have been made to not only develop new molecular entities but also more efficient sustainable synthetic methodologies due to the increasing concerns over environmental sustainability. In this context, we have developed synthetic routes to novel corannulene flanked imidazolium bromide NHC precursors both in the solid state and solution phases. Our work presents a comprehensive comparative study of mechanochemical routes and conventional solution-based methods. Green metrics and energy consumption comparison were performed for both routes reveal ball-milling generation of these compounds to be an environmentally greener technique to produce such precursors compared to conventional solvent-based methods. In addition, we have demonstrated proof-of-concept of the herein reported corannulene flanked NHCs to be robust ligands to transition metals and their ligand substitution reactions.

Mechanochemically Promoted Functionalization of Postconsumer Poly(Methyl Methacrylate) and Poly(α-Methylstyrene) for Bulk Depolymerization.

We describe a methodology of post-polymerization functionalization to enable subsequent bulk depolymerization to monomer by utilizing mechanochemical macro-radical generation. By harnessing ultrasonic chain-scission in the presence of N-hydroxyphthalimide methacrylate (PhthMA), we successfully chain-end functionalize polymers to promote subsequent depolymerization in bulk, achieving up to 81% depolymerization of poly(methyl methacrylate) (PMMA) and poly(α-methylstyrene) (PAMS) within 30 min. This method of depolymerization yields a high-purity monomer that can be repolymerized. Moreover, as compared to the most common methods of depolymerization, this work is most efficient with ultra-high molecular weight (UHMW) polymers, establishing a method with the potential to address highly persistent, non-degradable all-carbon backbone plastic materials. Lastly, we demonstrate the expansion of this depolymerization method to commercial cell cast PMMA, achieving high degrees of depolymerization from post-consumer waste. This work is the first demonstration of applying PhthMA-promoted depolymerization strategies in homopolymer PMMA and PAMS prepared by conventional polymerization methods.

Fluoride removal from coal mining water using novel polymeric aluminum modified activated carbon prepared through mechanochemical process.

Defluoridation of coal mining water is of great significance for sustainable development of coal industry in western China. A novel one-step mechanochemical method was developed to prepare polymeric aluminum modified powder activated carbon (PAC) for effective fluoride removal from coal mining water. Aluminum was stably loaded on the PAC through facile solid-phase reaction between polymeric aluminum (polyaluminum chloride (PACl) or polyaluminum ferric chloride (PAFC)) and PAC (1:15 W/W). Fluoride adsorption on PACl and PAFC modified PAC (C-PACl and C-PAFC) all reached equilibrium within 5 min, at rate of 2.56 g mg-1 sec-1 and 1.31 g mg-1 sec-1 respectively. Larger increase of binding energy of Al on C-PACl (AlF bond: 76.64 eV and AlFOH bond: 77.70 eV) relative to that of Al on C-PAFC (AlF bond: 76.52 eV) explained higher fluoride uptake capacity of C-PACl. Less chloride was released from C-PACl than that from C-PAFC due to its higher proportion of covalent chlorine and lower proportion of ionic chlorine. The elements mapping and atomic composition proved the stability of Al loaded on the PAC as well as the enrichment of fluoride on both C-PACl and C-PAFC. The Bader charge, formation energy and bond length obtained from DFT computational results explained the fluoride adsorption mechanism further. The carbon emission was 7.73 kg CO2-eq/kg adsorbent prepared through mechanochemical process, which was as low as 1:82.3 to 1:8.07 × 104 compared with the ones prepared by conventional hydrothermal methods.

Mechanochemical Synthesis of Boroxine-linked Covalent Organic Frameworks.

We report a rapid, room-temperature mechanochemical synthesis of 2- and 3-dimensional boroxine covalent organic frameworks (COFs), enabled by using trimethylboroxine as a dehydrating additive to overcome the hydrolytic sensitivity of boroxine-based COFs. The resulting COFs display high porosity and crystallinity, with COF-102 being the first example of a mechanochemically prepared 3D COF, exhibiting a surface area of ca. 2,500 m2 g-1. Mechanochemistry enabled a >20-fold reduction in solvent use and ~100-fold reduction in reaction time compared with solvothermal methods, providing target COFs quantitatively with no additional work-up besides vacuum drying. Real-time Raman spectroscopy permitted the first quantitative kinetic analysis of COF mechanosynthesis, while transferring the reaction design to Resonant Acoustic Mixing (RAM) enabled synthesis of multi-gram amounts of the target COFs (tested up to 10 g).

Trimethoprim-Based multicomponent solid Systems: Mechanochemical Screening, characterization and antibacterial activity assessment.

In this work, multicomponent trimethoprim-based pharmaceutical solid systems were developed by mechanochemistry, using coformers from the GRAS list and other active pharmaceutical ingredients. The choice of coformers took into account their potential to increase the aqueous solubility/dissolution rate of TMP or its antibacterial activity. All the binary systems were characterized by thermal analysis, powder X-ray diffraction and infrared spectroscopy, and 3 equimolar systems with FTIR pointing to salts, and 4 eutectic mixtures were identified. The intrinsic dissolution rate of TMP in combination with nicotinic acid (a salt) and with paracetamol (eutectic mixture) were 25% and 5% higher than for pure TMP, respectively. For both Gram-positive and -negative strains, the antibacterial activity of TMP with some of the coformers was improved, since the dosage used was lower than the TMP control. A significant increase in antibacterial activity against E. coli was found for the eutectic mixture with curcumin, with the best results being obtained for the eutectic and equimolar mixtures with ciprofloxacin. Combining trimethoprim with coformers offers an interesting alternative to using trimethoprim alone: multicomponent forms with enhanced TMP dissolution rates were identified, as well as combinations showing enhanced antibacterial activity relatively to the pure drug.

Encapsulation of Gemcitabine on Porphyrin Aluminum Metal-Organic Framework by Mechano-Chemistry, Delayed Drug Release and Cytotoxicity to Pancreatic Cancer PANC-1 Cells.

Gemcitabine is a widely used antimetabolite drug of pyrimidine structure, which can exist as a free-base molecular form (Gem). The encapsulated forms of medicinal drugs are of interest for delayed and local drug release. We utilized, for the first time, a novel approach of mechano-chemistry by liquid-assisted grinding (LAG) to encapsulate Gem on a "matrix" of porphyrin aluminum metal-organic framework Al-MOF-TCPPH2 (compound 2). The chemical bonding of Gem to compound 2 was studied by ATR-FTIR spectroscopy and powder XRD. The interaction involves the C=O group of Gem molecules, which indicates the formation of the encapsulation complex in the obtained composite. Further, the delayed release of Gem from the composite was studied to phosphate buffered saline (PBS) at 37 °C using an automated drug dissolution apparatus equipped with an autosampler. The concentration of the released drug was determined by HPLC-UV analysis. The composite shows delayed release of Gem due to the bonded form and constant concentration thereafter, while pure Gem shows quick dissolution in less than 45 min. Delayed release of Gem drug from the composite follows the kinetic pseudo-first-order rate law. Further, for the first time, the mechanism of delayed release of Gem was assessed by the variable stirring speed of drug release media, and kinetic rate constant k was found to decrease when stirring speed is decreased (diffusion control). Finally, the prolonged time scale of toxicity of Gem to pancreatic cancer PANC-1 cells was studied by continuous measurements of proliferation (growth) for 6 days, using the xCELLigence real-time cell analyzer (RTCA), for the composite vs. pure drug, and their differences indicate delayed drug release. Aluminum metal-organic frameworks are new and promising materials for the encapsulation of gemcitabine and related small-molecule antimetabolites for controlled delayed drug release and potential use in drug-eluting implants.

From 0D-complex to 3D-MOF: changing the antimicrobial activity of zinc(II) via reaction with aminocinnamic acids.

Combining zinc nitrate with 3- and/or 4- aminocinnamic acid (3-ACA and 4-ACA, respectively) leads to the formation of the 0D complex [Zn(4-AC)2(H2O)2], the 1D coordination polymer [Zn(3-AC)(4-AC)], and the 2D and 3D MOFs [Zn(3-AC)2]∙2H2O and [Zn(4-AC)2]∙H2O, respectively. These compounds result from the deprotonation of the acid molecules, with the resulting 3- and 4-aminocinnamate anions serving as bidentate terminal or bridging ligands. All solids were fully characterized via single crystal and powder X-ray diffraction and thermal techniques. Given the mild antimicrobial properties of cinnamic acid derivatives and the antibacterial nature of the metal cation, these compounds were assessed and demonstrated very good planktonic cell killing as well as inhibition of biofilm growth against Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus.

On the Interplay Between Force, Temperature, and Electric Fields in the Rupture Process of Mechanophores.

The use of oriented external electric fields (OEEFs) shows promise as an alternative approach to chemical catalysis. The ability to target a specific bond by aligning it with a bond-weakening electric field may be beneficial in mechanochemical reactions, which use mechanical force to selectively rupture bonds. Previous computational studies have focused on a static description of molecules in OEEFs, neglecting to test the influence of thermal oscillations on molecular stability. Here, we performed ab initio molecular dynamics (AIMD) simulations based on density functional theory (DFT) to investigate the behaviour of a model mechanophore under the simultaneous influence of thermal and electric field effects. We show that the change in bond length caused by a strong electric field is largely independent of the temperature, both without and with mechanical stretching forces applied to the molecule. The amplitude of thermal oscillations increases with increasing field strength and temperature, but at low temperatures, the application of mechanical force leads to an additional increase in amplitude. Our research shows that methods for applying mechanical force and OEEFs can be safely combined and included in an AIMD simulation at both low and high temperatures, allowing researchers to computationally investigate mechanochemical reactions in realistic application scenarios.

Organic Reactions Enabled by Mechanical Force-Induced Single Electron Transfer.

Mechanochemical reactions, achieved through milling, grinding, or other mechanical actions, have emerged as a solvent-free alternative to traditional solution-based chemistry. Mechanochemistry not only provides the opportunity to eliminate bulk solvent use, reducing waste generation, but also unveils a new reaction strategy which enables the realization of reactions previously inaccessible in solution. While the majority of organic reactions facilitated by mechanical force traditionally follow two-electron transfer pathways similar to their solution-based counterparts, the field of mechanochemically induced single-electron transfer (SET) reactions has witnessed rapid development. This review outlines examples of mechanochemical reactions facilitated by the SET process, focusing on the reagents that initiate SET, thereby positioning mechanochemistry as a burgeoning field within the realm of single-electron chemistry.

Mechanochemical Synthesis of MOF-303 and Its CO2 Adsorption at Ambient Conditions.

Metal-organic structures have great potential for practical applications in many areas. However, their widespread use is often hindered by time-consuming and expensive synthesis procedures that often involve hazardous solvents and, therefore, generate wastes that need to be remediated and/or recycled. The development of cleaner, safer, and more sustainable synthesis methods is extremely important and is needed in the context of green chemistry. In this work, a facile mechanochemical method involving water-assisted ball milling was used for the synthesis of MOF-303. The obtained MOF-303 exhibited a high specific surface area of 1180 m2/g and showed an excellent CO2 adsorption capacity of 9.5 mmol/g at 0 °C and under 1 bar.

Low-Temperature Methane Activation Reaction Pathways over Mechanochemically-Generated Ce4+/Cu+ Interfacial Sites.

Methane is a valuable resource and its valorization is an important challenge in heterogeneous catalysis. Here it is shown that CeO2/CuO composite prepared by ball milling activates methane at a temperature as low as 250 °C. In contrast to conventionally prepared catalysts, the formation of partial oxidation products such as methanol and formaldehyde is also observed. Through an in situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) and operando Near Edge X-Ray Absorption Fine Structure Spectroscopy (NEXAFS) approach, it can be established that this unusual reactivity can be attributed to the presence of Ce4+/Cu+ interfaces generated through a redox exchange between Ce3+ and Cu2+ atoms facilitated by the mechanical energy supplied during milling. DFT modeling of the electronic properties confirms the existence of a charge transfer mechanism. These results demonstrate the effectiveness and distinctiveness of the mechanical approach in creating unique and resilient interfaces thereby enabling the optimization and refining of CeO2/CuO catalysts in methane activation reactions.

Ball-milling toward nickel(II) diphosphine complexes for direct use in catalysis.

Mechanochemistry turned out to be a powerful synthetic tool enabling the first efficient synthesis of nickel(II) complexes with diphosphine.). It has been demonstrated that solventless ball-milling of nickel(II) halides with diphosphines leads to the [NiX2(diphosphine)] type compounds, which can be directly used in catalysis without any purification. Moreover, it was confirmed that despite the presence of impurities in the resulting complexes, their catalytic activity remains identical to those obtained via traditional solvent-based methods.

Mechanochemical Synthesis of Silylcyclopentenes via Ball Milling.

The development of innovative methods for synthesizing silylcyclopentene compounds is particularly important for enriching and improving the synthetical toolbox of organosilicon compounds. Herein, a facile approach has been developed for the synthesis of silylcyclopentenes promoted by mechanochemically generated organolithium species as silicon nucleophiles under ball milling conditions, avoiding the requirement of large amounts of bulk solvent. This operationally simple method demonstrates good functional group compatibility, which provides a great opportunity for further exploration of the synthetic applications of silylcyclopentenes. Density functional theory calculations indicated that the transient lithiosilole intermediates undergo a stepwise nucleophilic addition process, which governs this mechanic-force-promoted [4+1] cycloaddition reaction.

Mechanically Controlled Radical Polymerization: From Harsh to Mild.

Mechanochemistry constitutes a burgeoning field that investigates the chemical and physicochemical alterations of substances under mechanical force. It enables the synthesis of materials which was challenging to access via conventional thermal, optical, and electrical activation methods. In addition, it diminishes reliance on organic solvents and provides a novel route for green chemistry. Today, as a distinct branch alongside electrochemistry, photochemistry, and thermochemistry, mechanochemistry has emerged as an intersected research field with chemistry and material science. In recent years, the combination of mechanochemistry with controlled radical polymerization has witnessed rapid advancement, providing new sights to polymer science. The mechanochemically controlled radical polymerization (mechano-CRP) not only facilitate the synthesis of polymers with high molecular weight but also enable precise control over polymer chain length and structure. To diminish the side reactions by the strong mechanical force, transitioning from harsh to mild conditions in mechanochemical routes has been recognized as one of the primary advancements. From this perspective, we introduce the progress of mechanochemistry in controlled radical polymerization in recent years, aim to clarify the development trend of this research direction and stimulate senior researchers or newcomers to contemplate the future direction of this field.

Insights into the Mechanochemical Glass Formation of Zeolitic Imidazolate Frameworks.

Metal-organic framework (MOF) glasses, known for their potential in gas separation, optics, and solid-state electrolytes, benefit from the processability of their (supercooled) liquid state. Traditionally, MOF glasses are produced by heating MOF crystals to their melting point and then cooling the liquid MOF to room temperature under an inert atmosphere. While effective, this melt-quenching technique requires high energy due to the high temperatures involved. It also limits the scope of new material development by restricting the compositional range to only those combinations of metal ions and linkers that are highly thermally stable. An alternative, mechanical milling at room temperature, has demonstrated its capability to transform MOF crystals into amorphous phases. However, the specific conditions under which these amorphous phases exhibit glass-like behavior remain uncharted. In this study, we explore the mechanochemical amorphization and vitrification of a variety of zeolitic imidazolate frameworks (ZIFs) with diverse linkers and different metal ions (Zn2+, Co2+ and Cu2+) at room temperature. Our findings demonstrate that ZIFs capable of melting can be successfully converted into glasses through ball-milling. Remarkably, some non-meltable ZIFs can also be vitrified using the ball-milling technique, as highlighted by the preparation of the first Cu2+-based ZIF glass.

Solid-state reaction of alkylamines with CO2 in ambient air.

This paper explores possible procedures to accelerate CO2 capture from ambient air by a crystalline alkylamine surfactant (octadecylamine), leading to the corresponding crystalline ammonium-carbamate. Conversion of the amine to the carbamate, in different conditions, is studied by four different techniques: WAXD, FTIR, TGA, and DSC. The WAXD study also gives relevant information on the crystal structures of both amine and derived carbamate. Kinetics of reactions of the crystalline amine are mainly studied by DSC scans, by evaluating melting enthalpies of residual amine. The kinetics of conversion of the amine in ambient CO2 is strongly accelerated by ball milling with full conversion achieved after only 4h, while the reaction kinetics of amine powder simply exposed to ambient CO2 is complete only after nearly 103 h. A substantial increase in kinetics of the solid-state amine reaction with ambient CO2 can be also achieved by increasing the temperature up to 50°C, i.e. at a temperature slightly lower than amine melting. However, the time for full conversion remains much higher than for room-temperature ball-milled amine (roughly 102h vs 4h). Hence, suitable ball-milling procedures can lead to complete and relatively fast conversion of the crystalline amine to the crystalline ammonium-carbamate, even with ambient CO2.

Hydrogel morphogenesis induced by force-controlled growth.

Morphogenesis is one of the most marvelous natural phenomena. The morphological characteristics of biological organs develop through growth, which is often triggered by mechanical force. In this study, we propose a bioinspired strategy for hydrogel morphogenesis through force-controlled chemical reaction and growth under isothermal conditions. We adopted a double network (DN) hydrogel with sacrificial bonds. Applying mechanical force to the gel caused deformation and sacrificial bond rupture. By supplying monomers to the gel, the radicals generated by the bond rupture triggered the formation of a new network inside the deformed gel. This new network conferred plasticity to the elastic gel, allowing it to maintain its deformed shape, along with increased volume and strength. We demonstrated that sheet-shaped DN hydrogels rapidly adopted various three-dimensional shapes at ambient temperature when subjected to forces such as drawing and blowing. This mechanism enables morphogenesis of elastic hydrogels and will promote the application of these materials in biomedical fields and soft machines.

Tailoring topology and bio-interactions of triazine frameworks.

The construction of covalent organic frameworks with special geometery and optical properties is of high interest, due to their unique physicochemical and biological properties. In this work, we report on a new method for the construction of triazine frameworks with defined topologies using coordination chemistry. Ball milling and wet chemical reactions between cyanuric chloride and melamine were directed in spatial arrangements and opposite optical activity. Cobalt was used as a directing agent to drive reactions into special morphologies, optical properties and biological activity. The enantiorecognition ability of triazine frameworks that was manifested in their activities against bacteria, demonstrated a new way for the construction of materials with specific interactions at biointerfaces.

Mechanochemistry Drives Alkene Difunctionalization via Radical Ligand Transfer and Electron Catalysis.

A general and modular protocol is reported for olefin difunctionalization through mechanochemistry, facilitated by cooperative radical ligand transfer (RLT) and electron catalysis. Utilizing mechanochemical force and catalytic amounts of 2,2,6,6-tetramethylpiperidinyloxyl (TEMPO), ferric nitrate can leverage nitryl radicals, transfer nitrooxy-functional group via RLT, and mediate an electron catalysis cycle under room temperature. A diverse range of activated and unactivated alkenes exhibited chemo- and regioselective 1,2-nitronitrooxylation under solvent-free or solvent-less conditions, showcasing excellent functional group tolerance. Mechanistic studies indicated a significant impact of mechanochemistry and highlighted the radical nature of this nitrative difunctionalization process.

Unlocking New Avenues: Solid-State Synthesis of Molecularly Imprinted Polymers.

Molecularly imprinted polymers (MIPs) are established artificial molecular recognition platforms with tailored selectivity towards a target molecule, whose synthesis and functionality are highly influenced by the nature of the solvent employed in their synthesis. Steps towards the "greenification" of molecular imprinting technology (MIT) has already been initiated by the elaboration of green MIT principles; developing MIPs in a solvent-free environment may not only offer an eco-friendly alternative, but could also significantly influence the affinity and expected selectivity of the resulting binding sites. In the current study the first solvent-free mechanochemical synthesis of MIPs via liquid-assisted grinding (LAG) is reported. The successful synthesis of the imprinted polymer was functionally demonstrated by measuring its template rebinding capacity and the selectivity of the molecular recognition process in comparison with the ones obtained by the conventional, non-covalent molecular imprinting process in liquid media. The results demonstrated similar binding capacities towards the template molecule and superior chemoselectivity compared to the solution-based MIP synthesis method. The adoption of green chemistry principles with all their inherent advantages in the synthesis of MIPs may not only be able to alleviate the potential environmental and health concerns associated with their analytical (e.g., selective adsorbents) and biomedical (e.g., drug carriers or reservoirs) applications, but might also offer a conceptual change in molecular imprinting technology.