Fluorinated Surface Engineering Towards High-Rate and Durable Potassium-Ion Battery.

Solid electrolyte interphase (SEI) crucially affects the rate performance and cycling lifespan, yet to date more extensive research is still needed in potassium-ion batteries. We report an ultra-thin and KF-enriched SEI triggered by tuned fluorinated surface design in electrode. Our results reveal that fluorination engineering alters the interfacial chemical environment to facilitate inherited electronic conductivity, enhance adsorption ability of potassium, induce localized surface polarization to guide electrolyte decomposition behavior for SEI formation, and especially, enrich the KF crystals in SEI by self-sacrifice from C-F bond cleavage. Hence, the regulated fluorinated electrode with generated ultra-thin, uniform, and KF-enriched SEI shows improved capacity of 439.3 mAh g-1 (3.82 mAh cm-2), boosted rate performance (202.3 mAh g-1 at 8.70 mA cm-2) and durable cycling performance (even under high loading of ~8.7 mg cm-2). We expect this practical engineering principle to open up new opportunities for upgrading the development of potassium-ion batteries.

Theoretical Study on the Structures and Electronic Properties of Tungsten Fluorides at High Pressures.

Transition metal fluorides are a series of strong oxidizing agents. Tungsten (W) fluorides, particularly WF6, have shown broad applications such as luminescence and fluorinating agent. However, other stoichiometries of W fluorides have rarely been studied. It is well-known that pressure can induce structural phase transition, stabilize new compounds, and produce novel properties. In this work, the high-pressure phases of W-F were searched systematically at the pressure range of 0-200 GPa through first-principles swarm-intelligence structural search calculations. A new stoichiometry of WF4 has been predicted to be stable under high pressures. On the other hand, two new high-pressure phases of WF6 with the symmetries of P 2 1 ${{P2}_{1}}$ /m and P ${P}$ -1 were found with decahedral structural units. The electronic properties of the W-F compounds were then investigated. The predicted stable WF6 high-pressure phases maintain semiconducting features, since the W atom provides all its valence electrons to fluorine. We evaluated the oxidizing ability of WF6 by calculating its electron affinity potential. The high pressure P 2 1 ${{P2}_{1}}$ /m WF6 molecular phase shows higher oxidation capacity than the ambient phase. The built pressure-composition phase diagram and the theoretical results of W-F system provide some useful information for experimental synthesis.

Synthesis under Normal Conditions and Morphology and Composition of AlF3 Nanowires.

AlF3 has interesting electrophysical properties, due to which the material is promising for applications in supercapacitors, UV coatings with low refractive index, excimer laser mirrors, and photolithography. The formation of AlF3-based nano- and micro-wires can bring new functionalities to AlF3 material. AlF3 nanowires are used, for example, in functionally modified microprobes for a scanning probe microscope. In this work, we investigate the AlF3 samples obtained by the reaction of initial aluminum with an aqueous hydrofluoric acid solution of different concentrations. The peculiarity of our work is that the presented method for the synthesis of AlF3 and one-dimensional structures based on AlF3 is simple to perform and does not require any additional precursors or costs related to the additional source materials. All the samples were obtained under normal conditions. The morphology of the nanowire samples is studied using scanning electron microscopy. We performed an intermediate atomic force microscope analysis of dissolved Al samples to analyze the reactions occurring on the metal surface. The surface of the obtained samples was analyzed using a scanning electron microscope. During the analysis, it was found that under the given conditions, whiskers were synthesized. The scale of one-dimensional structures varies depending on the given parameters in the system. Quantitative energy-dispersive x-ray spectroscopy spectra are obtained and analyzed with respect to the feedstock and each other.

Mesoporous Metal Fluoride Nanocomposite Films with Tunable Optical Properties Derived from Precursor Instability.

The precisely tailored refractive index of optical materials is the key to utilizing and manipulating light during its propagation through the matrix, thereby improving their application performances. In this paper, mesoporous metal fluoride films with engineered composition (MgF2 :LaF3 ) are demonstrated to achieve finely tunable refractive indices. These films are prepared using a precursor-derived one-step assembly approach via the simple mixing of precursor solutions (Mg(CF3 OO)2 and La(CF3 OO)3 ); then pores are formed simultaneously during solidification owing to the inherent instability of La(CF3 OO)3 . The mesoporous structures are realized through Mg(CF3 OO)2 and La(CF3 OO)3 ions, which interacted with each other based on their electrostatic forces, providing a wide range of refractive indices (from 1.37 to 1.16 at 633 nm). Furthermore, it is systematically several MgF2(1-x) -LaF3(x) layers with different compositions (x = 0.0, 0.3, and 0.5) to form the graded refractive index coating that is optically consecutive between the substrate and the air for broadband and omnidirectional antireflection. An average transmittance of ≈98.03% (400-1100 nm) is achieved with a peak transmittance of ≈99.04% (at 571 nm), and the average antireflectivity is maintained at ≈15.75% even at an incidence of light of 65° (400-850 nm).

Universal Renaissance Strategy of Metal Fluoride in Secondary Ion Batteries Enabled by Liquid Metal Gallium.

All-solid-state alkali ion batteries represent a future trend in battery technology, as well as provide an opportunity for low-cost metal fluoride electrode materials, if certain intrinsic problems can be resolved. In this work, a liquid metal activation strategy is proposed in which liquid Ga elements are generated in situ and doped into the LiF crystal structure by introducing a small amount of GaF3 . Benefiting from these two Ga states of existence, in which the liquid metal Ga can continuously maintain conformable ion/electron-transport networks, while doped Ga in the LiF crystal structure catalyzes LiF splitting, the lithium-ion storage capacity of MnF2 significantly increases by 87%. A similar effect can be obtained in FeF3 , where the sodium-ion storage capacity is enhanced by 33%. This universal strategy with few restrictions can be used to realize a complete renaissance of metal fluorides, as well as offer an opportunity for the new application of liquid metals in the field of energy storage.

Metal Fluoride Cathode Materials for Lithium Rechargeable Batteries: Focus on Iron Fluorides.

Exploring prospective rechargeable batteries with high energy densities is urgently needed on a worldwide scale to address the needs of the large-scale electric vehicle market. Conversion-type metal fluorides (MFs) are attractive cathodes for next-generation rechargeable batteries because of their high theoretical potential and capacities and provide new perspectives for developing novel battery systems that satisfy energy density requirements. However, some critical issues, such as high voltage hysteresis and poor cycling stability must be solved to further enhance MF cathode materials. In this review, the recent advances in mechanisms focused on FeF3 cathodes under lithiation/delithiation processes are discussed in detail. Then, the classifications and advantages of various synthesis methods to prepare MF-based materials are first minutely discussed. Moreover, the performance attenuation mechanisms of MFs and the effort in the development of mitigation strategies are comprehensively reviewed. Finally, prospects for the current obstacles and possible research directions, with the aim to provide some inspiration for the development of MF cathode-based batteries are presented.

Pseudocapacitance-Enhanced Storage Kinetics of 3D Anhydrous Iron (III) Fluoride as a Cathode for Li/Na-Ion Batteries.

Transition metal fluoride (TMF) conversion cathodes, with high energy density, are recognized as promising candidates for next-generation high-energy Li/Na-ion batteries (LIBs/SIBs). Unfortunately, the poor electronic conductivity and detrimental active material dissolution of TMFs seriously limit the performance of TMF-LIBs/SIBs. A variety of FeF3-based composites are designed to improve their electrochemical characteristics. However, the storage mechanism of the conversion-type cathode for Li+ and Na+ co-storage is still unclear. Here, the storage mechanism of honeycomb iron (III) fluoride and carbon (FeF3@C) as a general cathode for LIBs/SIBs is analyzed by kinetics. In addition, the FeF3@C cathode shows high electrochemical performance in a full-cell system. The results show that the honeycomb FeF3@C shows excellent long-term cycle stability in LIBs (208.3 mA h g-1 at 1.0 C after 100 cycles with a capacity retention of 98.1%). As a cathode of SIBs, the rate performance is unexpectedly stable. The kinetic analysis reveals that the FeF3@C cathode exhibit distinct ion-dependent charge storage mechanisms and exceptional long-durability cyclic performance in the storage of Li+/Na+, benefiting from the synergistic contribution of pseudocapacitive and reversible redox behavior. The work deepens the understanding of the conversion-type cathode in Li+/Na+ storage.

Room-Temperature Anode-Less All-Solid-State Batteries via the Conversion Reaction of Metal Fluorides.

All-solid-state batteries (ASSBs) that employ anode-less electrodes have drawn attention from across the battery community because they offer competitive energy densities and a markedly improved cycle life. Nevertheless, the composite matrices of anode-less electrodes impose a substantial barrier for lithium-ion diffusion and inhibit operation at room temperature. To overcome this drawback, here, the conversion reaction of metal fluorides is exploited because metallic nanodomains formed during this reaction induce an alloying reaction with lithium ions for uniform and sustainable lithium (de)plating. Lithium fluoride (LiF), another product of the conversion reaction, prevents the agglomeration of the metallic nanodomains and also protects the electrode from fatal lithium dendrite growth. A systematic analysis identifies silver (I) fluoride (AgF) as the most suitable metal fluoride because the silver nanodomains can accommodate the solid-solution mechanism with a low nucleation overpotential. AgF-based full cells attain reliable cycling at 25 °C even with an exceptionally high areal capacity of 9.7 mAh cm-2 (areal loading of LiNi0.8 Co0.1 Mn0.1 O2  = 50 mg cm-2 ). These results offer useful insights into designing materials for anode-less electrodes for sulfide-based ASSBs.

From CsKTaF7 to CsNaTaF7 : Alkali Metal Cations Regulation to Generate SHG Activity.

Inorganic metal halides play important roles in wide range of areas including fluorescence, X-ray detection, and nonlinear-optics. Herein, two new mixed alkali metal tantalum fluorides, CsKTaF7 and CsNaTaF7 , have been obtained based on the strategy of cations regulation in A2 MF7 (A represents monovalent cations and M is d0 transition-metal cation) system by a conventional hydrothermal route. CsKTaF7 crystallizes in the centric Pnma space group, while CsNaTaF7 crystallizes in the polar Cmc21 space group and exhibits moderate and phase-matchable NLO activity. Both halides possess large optical band gaps above 5.0 eV. The crystal structure evolution, optical properties, and detailed theory calculations of these two halides were elucidated in this work.

Recent Developments of Cathode Materials for Thermal Batteries.

Big progress has been made in batteries based on an intercalation mechanism in the last 20 years, but limited capacity in batteries hinders their further increase in energy density. The demand for more energy intensity makes research communities turn to conversion-type batteries. Thermal batteries are a special kind of conversion-type battery, which are thermally activated primary batteries composed mainly of cathode, anode, separator (electrolyte), and heating mass. Such kinds of battery employ an internal pyrotechnic source to make the battery stack reach its operating temperature. Thermal batteries have a long history of research and usage in military fields because of their high specific capacity, high specific energy, high thermal stability, long shelf life, and fast activation. These experiences and knowledge are of vital importance for the development of conversion-type batteries. This review provides a comprehensive account of recent studies on cathode materials. The paper covers the preparation, characterization of various cathode materials, and the performance test of thermal batteries. These advances have significant implications for the development of high-performance, low-cost, and mass production conversion-type batteries in the near future.

Ultra-Fast and In-Depth Reconstruction of Transition Metal Fluorides in Electrocatalytic Hydrogen Evolution Processes.

Hitherto, there are almost no reports on the complete reconstruction in hydrogen evolution reaction (HER). Herein, the authors develop a new type of reconfigurable fluoride (such as CoF2 ) pre-catalysts, with ultra-fast and in-depth self-reconstruction, substantially promoting HER activity. By experiments and density functional theory (DFT) calculations, the unique surface structure of fluorides, alkaline electrolyte and bias voltage are identified as key factors for complete reconstruction during HER. The enrichment of F atoms on surface of fluorides provides the feasibility of spontaneous and continuous reconstruction. The alkaline electrolyte triggers rapid F- leaching and supplies an immediate complement of OH- to form amorphous α-Co(OH)2 which rapidly transforms into ß-Co(OH)2 . The bias voltage promotes amorphous crystallization and accelerates the reconstruction process. These endow the generation of mono-component and crystalline ß-Co(OH)2 with a loose and defective structure, leading to an ultra-low overpotential of 54 mV at 10 mA cm-2 and super long-term stability exceeding that of Pt/C. Moreover, DFT calculations confirm that F- leaching optimizes hydrogen and water adsorption energies, boosting HER kinetics. Impressively, the self-reconstruction is also applicable to other non-noble transition metal fluorides. The work builds the fundamental comprehension of complete self-reconstruction during HER and provides a new perspective to conceive advanced catalysts.

Fluoride-Induced Negative Differential Resistance in Nanopores: Experimental and Theoretical Characterization.

We describe experimentally and theoretically the fluoride-induced negative differential resistance (NDR) phenomena observed in conical nanopores operating in aqueous electrolyte solutions. The threshold voltage switching occurs around 1 V and leads to sharp current drops in the nA range with a peak-to-valley ratio close to 10. The experimental characterization of the NDR effect with single pore and multipore samples concern different pore radii, charge concentrations, scan rates, salt concentrations, solvents, and cations. The experimental fact that the effective radius of the pore tip zone is of the same order of magnitude as the Debye length for the low salt concentrations used here is suggestive of a mixed pore surface and bulk conduction regime. Thus, we propose a two-region conductance model where the mobile cations in the vicinity of the negative pore charges are responsible for the surface conductance, while the bulk solution conductance is assumed for the pore center region.

A HF Loaded Lewis-Acidic Aluminium Chlorofluoride for Hydrofluorination Reactions.

The very strong Lewis acid aluminium chlorofluoride (ACF) was loaded with anhydrous HF. The interaction between the surface of the catalyst and HF was investigated using a variety of characterization methods, which revealed the formation of polyfluorides. Moreover, the reactivity of the HF-loaded ACF towards the hydrofluorination of alkynes was studied.

Fading Mechanisms and Voltage Hysteresis in FeF2 -NiF2 Solid Solution Cathodes for Lithium and Lithium-Ion Batteries.

The rapid development of ultrahigh-capacity alloying or conversion-type anodes in rechargeable lithium (Li)-ion batteries calls for matching cathodes for next-generation energy storage devices. The high volumetric and gravimetric capacities, low cost, and abundance of iron (Fe) make conversion-type iron fluoride (FeF2 and FeF3 )-based cathodes extremely promising candidates for high specific energy cells. Here, the substantial boost in the capacity of FeF2 achieved with the addition of NiF2 is reported. A systematic study of a series of FeF2 -NiF2 solid solution cathodes with precisely controlled morphology and composition reveals that the presence of Ni may undesirably accelerate capacity fading. Using a powerful combination of state-of-the-art analytical techniques in combination with the density functional theory calculations, fundamental mechanisms responsible for such a behavior are uncovered. The unique insights reported in this study highlight the importance of careful selection of metals and electrolytes for optimizing electrochemical properties of metal fluoride cathodes.

Cu-Substituted NiF2 as a Cathode Material for Li-Ion Batteries.

Metal fluorides usually have a large electronegativity and are promising electrode materials for high-power lithium-ion batteries. However, like other conversion-reaction-based materials, large volumetric expansions and large capacity losses in cycling are the major issues for metal fluorides. Here, we explore substitution of Ni with Cu for binary NiF2 and its effects on the electrochemical properties. By in situ transmission electron microscopy, the structural evolutions of several ternary metal fluorides with different Cu/Ni ratios are observed and correlated with their electrochemical properties. With increased Cu substitution from 0 to 25 wt %, the areal expansion during the first lithiation is reduced. Meanwhile, the fluorine loss (due to reaction irreversibility) in the delithiation cycle is also reduced. This provides an explanation for the advantage of Cu substitution for improved cycling stability and capacity. We believe that our observations provide insight into the development of better ternary metal fluorides as cathodes for high power density lithium-ion batteries.

E2P-like states of plasma membrane Ca2+­ATPase characterization of vanadate and fluoride-stabilized phosphoenzyme analogues.

The plasma membrane Ca2+­ATPase (PMCA) belongs to the family of P-type ATPases, which share the formation of an acid-stable phosphorylated intermediate as part of their reaction cycle. The crystal structure of PMCA is currently lacking. Its abundance is approximately 0.1% of the total protein in the membrane, hampering efforts to produce suitable crystals for X-ray structure analysis. In this work we characterized the effect of beryllium fluoride (BeFx), aluminium fluoride (AlFx) and magnesium fluoride (MgFx) on PMCA. These compounds are known inhibitors of P-type ATPases that stabilize E2P ground, E2·P phosphoryl transition and E2·Pi product states. Our results show that the phosphate analogues BeFx, AlFx and MgFx inhibit PMCA Ca2+­ATPase activity, phosphatase activity and phosphorylation with high apparent affinity. Ca2+­ATPase inhibition by AlFx and BeFx depended on Mg2+ concentration indicating that this ion stabilizes the complex between these inhibitors and the enzyme. Low pH increases AlFx and BeFx but not MgFx apparent affinity. Eosin fluorescent probe binds with high affinity to the nucleotide binding site of PMCA. The fluorescence of eosin decreases when fluoride complexes bind to PMCA indicating that the environment of the nucleotide binding site is less hydrophobic in E2P-like states. Finally, measuring the time course of E → E2P-like conformational change, we proposed a kinetic model for the binding of fluoride complexes and vanadate to PMCA. In summary, our results show that these fluoride complexes reveal different states of phosphorylated intermediates belonging to the mechanism of hydrolysis of ATP by the PMCA.

Sol-Gel-Synthesis of Nanoscopic Complex Metal Fluorides.

The fluorolytic sol-gel synthesis for binary metal fluorides (AlF3, CaF2, MgF2) has been extended to ternary and quaternary alkaline earth metal fluorides (CaAlF5, Ca2AlF7, LiMgAlF6). The formation and crystallization of nanoscopic ternary CaAlF5 and Ca2AlF7 sols in ethanol were studied by 19F liquid and solid state NMR (nuclear magnetic resonance) spectroscopy, as well as transmission electron microscopy (TEM). The crystalline phases of the annealed CaAlF5, Ca2AlF7, and LiMgAlF6 xerogels between 500 and 700 °C could be determined by X-ray powder diffraction (XRD) and 19F solid state NMR spectroscopy. The thermal behavior of un-annealed nanoscopic ternary and quaternary metal fluoride xerogels was ascertained by thermal analysis (TG/DTA). The obtained crystalline phases of CaAlF5 and Ca2AlF7 derived from non-aqueous sol-gel process were compared to crystalline phases from the literature. The corresponding nanoscopic complex metal fluoride could provide a new approach in ceramic and luminescence applications.

Metal Fluorides as Analogues for Studies on Phosphoryl Transfer Enzymes.

The 1994 structure of a transition-state analogue with AlF4- and GDP complexed to G1α, a small G protein, heralded a new field of research into the structure and mechanism of enzymes that manipulate the transfer of phosphoryl (PO3- ) groups. The number of enzyme structures in the PDB containing metal fluorides (MFx ) as ligands that imitate either a phosphoryl or a phosphate group was 357 at the end of 2016. They fall into three distinct geometrical classes: 1) Tetrahedral complexes based on BeF3- that mimic ground-state phosphates; 2) octahedral complexes, primarily based on AlF4- , which mimic "in-line" anionic transition states for phosphoryl transfer; and 3) trigonal bipyramidal complexes, represented by MgF3- and putative AlF30 moieties, which mimic the geometry of the transition state. The interpretation of these structures provides a deeper mechanistic understanding into the behavior and manipulation of phosphate monoesters in molecular biology. This Review provides a comprehensive overview of these structures, their uses, and their computational development.

Ammonium Fluoride Mediated Synthesis of Anhydrous Metal Fluoride-Mesoporous Carbon Nanocomposites for High-Performance Lithium Ion Battery Cathodes.

Metal fluorides (MFx) are one of the most attractive cathode candidates for Li ion batteries (LIBs) due to their high conversion potentials with large capacities. However, only a limited number of synthetic methods, generally involving highly toxic or inaccessible reagents, currently exist, which has made it difficult to produce well-designed nanostructures suitable for cathodes; consequently, harnessing their potential cathodic properties has been a challenge. Herein, we report a new bottom-up synthetic method utilizing ammonium fluoride (NH4F) for the preparation of anhydrous MFx (CuF2, FeF3, and CoF2)/mesoporous carbon (MSU-F-C) nanocomposites, whereby a series of metal precursor nanoparticles preconfined in mesoporous carbon were readily converted to anhydrous MFx through simple heat treatment with NH4F under solventless conditions. We demonstrate the versatility, lower toxicity, and efficiency of this synthetic method and, using XRD analysis, propose a mechanism for the reaction. All MFx/MSU-F-C prepared in this study exhibited superior electrochemical performances, through conversion reactions, as the cathode for LIBs. In particular, FeF3/MSU-F-C maintained a capacity of 650 mAh g-1FeF3 across 50 cycles, which is ∼90% of its initial capacity. We expect that this facile synthesis method will trigger further research into the development of various nanostructured MFx for use in energy storage and other applications.

Pomegranate-Structured Conversion-Reaction Cathode with a Built-in Li Source for High-Energy Li-Ion Batteries.

Transition metal fluorides (such as FeF3 or CoF2) promise significantly higher theoretical capacities (>571 mAh g(-1)) than the cathode materials currently used in Li-ion batteries. However, their practical application faces major challenges that include poor electrochemical reversibility induced by the repeated bond-breaking and formation and the accompanied volume changes and the difficulty of building an internal Li source within the material so that a full Li-ion cell could be assembled at a discharged state without inducing further technical risk and cost issues. In this work, we effectively addressed these challenges by designing and synthesizing, via an aerosol-spray pyrolysis technique, a pomegranate-structured nanocomposite FeM/LiF/C (M = Co, Ni), in which 2-3 nm carbon-coated FeM nanoparticles (∼10 nm in diameter) and LiF nanoparticles (∼20 nm) are uniformly embedded in a porous carbon sphere matrix (100-1000 nm). This uniquely architectured nanocomposite was made possible by the extremely short pyrolysis time (∼1 s) and carbon coating in a high-temperature furnace, which prevented the overgrowth of FeM and LiF in the primordial droplet that serves as the carbon source. The presence of Ni or Co in FeM/LiF/C effectively suppresses the formation of Fe3C and further reduces the metallic particle size. The pomegranate architecture ensures the intimate contact among FeM, LiF, and C, thus significantly enhancing the conversion-reaction kinetics, while the nanopores inside the pomegranate-like carbon matrix, left by solvent evaporation during the pyrolysis, effectively accommodate the volume change of FeM/LiF during charge/discharge. Thus, the FeM/LiF/C nanocomposite shows a high specific capacity of >300 mAh g(-1) for more than 100 charge/discharge cycles, which is one of the best performances among all of the prelithiated metal fluoride cathodes ever reported. The pomegranate-structured FeM/LiF/C with its built-in Li source provides an inspiration to the practical application of conversion-reaction-type chemistries as next-generation cathode materials for high-energy density Li-ion batteries.