RESUMO
Large gas bubbles can reach the surface of pools of mud and lava where they burst, often through the formation and expansion of circular holes. Bursting bubbles release volatiles and generate spatter, and hence play a key role in volcanic degassing and volcanic edifice construction. Here, we study the ascent and rupture of bubbles using a combination of field observations at Pâclele Mici (Romania), laboratory experiments with mud from the Imperial Valley (California, USA), numerical simulations and theoretical models. Numerical simulations predict that bubbles ascend through the mud as elliptical caps that develop a dimple at the apex as they impinge on the free surface. We documented the rupture of bubbles in nature and under laboratory conditions using high-speed video. The bursting of mud bubbles starts with the nucleation of multiple holes, which form at a near-constant rate and in quick succession. The quasi-circular holes rapidly grow and coalesce, and the sheet evolves towards a filamentous structure that finally falls back into the mud pool, sometimes breaking up into droplets. The rate of expansion of holes in the sheet can be explained by a generalization of the Taylor-Culick theory, which is shown to hold independent of the fluid rheology.
RESUMO
Introduction: Vibrio alginolyticus is a Gram-negative, rod-shaped bacterium belonging to the family of Vibrionaceae, a common pathogen in aquaculture animals, However, studies on its impact on Scylla serrata (mud crabs) are limited. In this study, we isolated V. alginolyticus SWS from dead mud crab during a disease outbreak in a Hong Kong aquaculture farm, which caused up to 70% mortality during summer. Methods: Experimental infection and histopathology were used to investigate the pathogenicity of V. alginolyticus SWS in S. serrata and validate Koch's postulates. Comprehensive whole-genome analysis and phylogenetic analysis antimicrobial susceptibility testing, and biochemical characterization were also performed. Results: Our findings showed that V. alginolyticus SWS caused high mortality (75%) in S. serrata with infected individuals exhibiting inactivity, loss of appetite, decolored and darkened hepatopancreas, gills, and opaque muscle in the claw. Histopathological analysis revealed tissue damage and degeneration in the hepatopancreas, gills, and claw muscle suggesting direct and indirect impacts of V. alginolyticus SWS infection. Conclusions: This study provides a comprehensive characterization of V. alginolyticus SWS as an emerging pathogen in S. serrata aquaculture. Our findings underscore the importance of ongoing surveillance, early detection, and the development of targeted disease management strategies to mitigate the economic impact of vibriosis outbreaks in mud crab aquaculture.
Assuntos
Aquicultura , Braquiúros , Filogenia , Vibrio alginolyticus , Animais , Vibrio alginolyticus/genética , Vibrio alginolyticus/patogenicidade , Vibrio alginolyticus/isolamento & purificação , Vibrio alginolyticus/classificação , Braquiúros/microbiologia , Hong Kong/epidemiologia , Vibrioses/microbiologia , Vibrioses/veterinária , Brânquias/microbiologia , Brânquias/patologia , Virulência , Sequenciamento Completo do Genoma , Genoma Bacteriano/genética , Hepatopâncreas/microbiologia , Hepatopâncreas/patologia , Surtos de Doenças , Testes de Sensibilidade Microbiana , Antibacterianos/farmacologiaRESUMO
Red mud (RM) and spent oyster mushroom substrate (SOMS), by-products of industrial and agricultural production, can be recycled for polluted freshwater purification, bringing about a win-win situation. In this study, unacidified RM and RM acidified with oxalic acid (O-RM) and hydrochloric acid (H-RM), respectively, were mixed with SOMS to produce a porous ceramsite as a potential constructed wetlands (CWs) substrate. The results showed that the O-RM, H-RM, and RM ceramsites displayed fine compressive strengths of 7.75 ± 1.14, 8.40 ± 1.30, and 8.84 ± 0.69 MPa after calcining at 950 °C for 30 min, respectively. The phosphorus adsorption capacities of H-RM, O-RM, and RM ceramsite at a solid-liquid ratio of 25 g/L were 1.18 mg/g, 0.88 mg/g, and 1.06 mg/g, respectively. Toxicity release experiments showed that the ceramsites did not cause secondary environmental pollution, except for arsenic (ranging from 0.210 to 0.238 mg/L). The H-RM ceramsite was tested in a tidal flow-vertical flow CW (TF-VFCW) with Iris pseudacorus L. and Canna indica L plants. In the TF-VFCW, the average chemical oxygen demand (COD), ammonia nitrogen (NH4+-N), total nitrogen (TN), and total phosphorus (TP) removal rates were 81.01, 90.25, 66.90, and 77.32 %, respectively. Plant growth had less impact on COD and NH4-N removal but had greater limited TN and TP removal. Scanning electron microscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction analysis confirmed that acid pretreatment and the incorporation of SOMS significantly increased the surface and interior porous structures of the ceramsite and enhanced phosphate adsorption by the polyhydroxyl aluminum-iron complex ions. Bacteroides and Campylobacter used the energy produced during polyhydroxyalkanoic acid (PHA) catabolism to absorb phosphorus. Therefore, the synergistic effect of the substrate, plants, and microorganisms achieved the removal of phosphorus from CWs and offered effective and environmentally friendly recycling of RM and SOMS.
RESUMO
Red mud and phosphogypsum are two of the most typical bulk industrial solid wastes. How they can be efficiently recycled as resources on a large scale and at low costs has always been a global issue that urgently needs to be solved. By constructing a small-scale test site and preparing two types of artificial soils using red mud and phosphogypsum, this study simulated their engineering applications in vegetation restoration and ecological reconstruction. According to the results of this study, the artificial soils contained a series of major elements (e.g. O, Si, Al, Fe, Ca, Na, K, and Mg) similar to those in common natural soil, and preliminarily possessed basic physicochemical properties (pH, moisture, organic matter, and cation exchange capacity), main nutrient conditions (nitrogen, phosphorus and potassium), and biochemical characteristics that could meet the demands of plant growth. A total of 18 different types of adaptable plants (e.g. wood, herbs, flowers, succulents, etc) grew in the test sites, indicating that the artificial soils could be used for vegetation greening and landscaping. The preliminary formation of microbial (fungal and bacterial) community diversity and the gradually enriched arthropod community diversity reflected the constantly improving quality of the artificial soils, suggesting that they could be used for the gradual construction of artificial soil micro-ecosystems. Overall, the artificial soils provided a feasible solution for the large-scale, low-cost, and highly efficient synergistic disposal of red mud and phosphogypsum, with enormous potential for future engineering applications. They are expected to be used for vegetation greening, landscaping, and ecological environment improvement in tailings, collapse, and soil-deficient areas, as well as along municipal roads.
RESUMO
Cementing is an essential downhole operation during the drilling of oil, gas, and geothermal wells, with the primary objective of providing structural support and a seal in the wellbore. It is important to attain adequate cement strength to preserve well integrity, inhibit fluid movement, enhance zonal isolation, and hold the wellbore casing in place. However, a significant challenge arises from the potential contamination of the cement by drilling mud (DM) during the placement process. This study aims to assess the impact of both water-based drilling mud (WBDM) and oil-based drilling mud (OBDM) contamination on the strength of API Class G wellbore cement by comprehensively investigating the underlying causes and the mechanism of strength degradation. Following a systematic methodological approach and the guidelines provided by API and ASTM, cement slurries were prepared and contaminated with DM at 10 %, 20 %, and 30 % concentrations by volume. Subsequently, both neat and contaminated samples were cured for 1, 3, 7, and 14 days, after which a series of uniaxial compressive strength (UCS) tests were conducted, and the results were further reinforced by microstructural and petrophysical property analysis. The results demonstrate that both WBDM and OBDM contamination significantly reduce cement strength, irrespective of curing time. Though the effect of OBDM contamination appears to be more pronounced, the effect of WBDM contamination is also remarkable. After final curing of 14 days, WBDM-contaminated cement samples exhibited an average strength reduction of 45.06 %, while OBDM contamination led to a 66.32 % reduction in strength compared to the neat cement with 30 % contamination. Additionally, for the same curing time and contamination percentage, porosity was found to be increased by 71.18 % and 91.33 %, respectively. The mechanism of neat and contaminated cement hydration is explained with the support of SEM-EDS tests, which confirmed the presence of contamination and revealed how two different drilling muds generate dissimilar pore structures within the cement sheath, affecting the hydration and ultimately contributing to the observed reduction in strength. The findings quantify the negative impact of WBDM and OBDM contamination on wellbore cement, emphasizing the importance of mitigating mud contamination during cementing operations.
RESUMO
Pyrazines are important flavor components and healthy active components in Baijiu, which including tetramethylpyrazine (TTMP). During the brewing process, the traceability of microbial communities and the content distribution characteristics of TTMP are important for improving the quality and style characteristics of compound-flavored Baijiu (CFB). However, the traceability analysis of microorganisms in fermented grains (FG)-used in the production of CFB-lacks quantitative and systematic evaluation. In this study, the microbial communities and TTMP content of Jiuqu (JQ), Liangpei (LP), FG, and pit mud (CP) used in CFB production were characterized; further, coordinate and discriminant analyses were employed to determine differences in microbial communities. Additionally, traceability and correlation analyses were performed to reveal the origin of microbial communities in FG. The source, content, and distribution characteristics of TTMP based on the brewing process have also been discussed. The results showed that most of the bacterial and fungal communities at different levels of FG came from other sources, and the microorganisms of Cladosporium, Acetobacter, Aspergillus, Methanosarcina, and Bacillus were considered have a osculating correlations with TTMP content of FG. Taken together, this study provides insights into the origin of microbial communities in FG and the distribution characteristics of TTMP based on the CFB brewing process. The current findings are conducive for optimizing the fermentation process and improving the quality and style characteristics of CFB.
RESUMO
Vibrio parahaemolyticus (V. parahaemolyticus) is a major bacterial pathogen found in brackish environments, leading to disease outbreaks and great economic losses in the mud crab industry. This study investigated the molecular mechanism of V. parahaemolyticus infecting mud crabs through genome sequencing analysis, survival experiments, and the expression patterns of related functional genes. A strain of V. parahaemolyticus with high pathogenicity and lethality was isolated from diseased mud crab in South China. The genome sequencing results showed that the genome size of V. parahaemolyticus was a circular chromosome of 3,357,271 bp, with a GC content of 45%, containing 2,985 protein-coding genes, denoted as V. parahaemolyticus LG2206. Genome analysis data revealed that a total of 113 adherence coding genes were obtained, including 120 virulence factor coding genes, 37 type III secretion system (T3SS) coding genes, and 277 sequences of T3SS effectors. Survival experiments showed that the mortality was 20% within 96 h in the 1 × 104 CFU/mL infection group, 90% in the 3.2 × 105 CFU/mL treatment group, and 100% in the 1 × 106 CFU/mL treatment group. The LD50 of V. parahaemolyticus LG2206 was determined as 4.6 × 104 CFU/mL. Six genes of znuA and fliD (flagellin encoding genes), yscE and yscR (T3SS encoding genes), and nfuA and htpX (virulence factor encoding genes) were selected and validated by quantitative real-time PCR analysis after infection with 4.6 × 104 CFU/mL of V. parahaemolyticus LG2206 for 96 h. The expression of the six genes exhibited a significant up-regulation trend at all tested time points. The results indicated that the infestation-related genes screened in the experiment play important roles in the infestation process. This study provides timely and effective information to further analyze the molecular mechanism of V. parahaemolyticus infection and develop comprehensive measures for disease prevention and control.
RESUMO
Pit mud (PM) is fermenting agents in the strong-flavor baijiu (SFB) production. In this paper, the discrepancies in fermentation parameters, microbial community succession patterns and metabolic phenotypes were compared in multidimensional PMs. The results showed that pyruvic acid, succinic acid, S-Acetyldihydrolipoamide-E, glycerol and glyceric acid were the key metabolites responsible for the metabolic differences between the 2-, 30-,100- and 300-year multidimensional PMs, while the butanoic acid, heptyl, heptanoic acid, heptanoic acid ethyl ester, hexanoic acid and octanoic acid were the key differential flavor compounds in the 2-, 30-,100- and 300-year multidimensional PMs. Concurrently, the diversity and abundance of microbial community also exhibited significant differences between the new and old multidimensional PMs, the assembly pattern of bacterial communities changed from deterministic to stochasticity from lower (bottom of the pit and under the huangshui fluid) to upper PM (up the huangshui fluid and top of the pit). Key microorganisms related to the succession process of the lower PM were Clostridium, Methanobacterium, Petrimonas, Lactobacillus, Methanobrevibacter, Bellilinea, Longilinea, Bacillus. In contrast, the upper PM were Caproicibacter, Longilinea, Lactobacillus, Proteinphilum, Methanobrevibacter, Methanobacterium, Methanobacteriaceae, Petrimonas, Bellilinea and Atopobium. Redundancy analysis (RDA) indicated that the key environmental factors regulating the succession of microbial in upper PM were lactic acid, moisture, pH and available phosphorus. In contrast, the lower was lactic acid, acetic acid and ammonia N. Based on these results, heterogeneous mechanisms between new and old multidimensional PMs were explored, providing a theoretical support for improving the quality of new PM.
Assuntos
Fermentação , Fenótipo , Bactérias/metabolismo , Bactérias/classificação , Microbiota , Aromatizantes/metabolismo , Microbiologia de Alimentos , PaladarRESUMO
Red mud (RM) is the industrial solid waste produced after alumina extraction from bauxite, and most RM is directly discharged to the landfill yards without any treatment. In this study, modified red mud (MRM) was synthesized by a hydrothermal chemical modification method as an efficient adsorbent for methylene blue (MB) removal. The prepared MRM was characterized by X-ray fluorescence spectroscopy, X-ray diffraction, scanning electron microscope, transmission electron microscope, and Fourier transform infrared spectrometer. The effects of reaction time, initial MB concentrations, MRM dosage, temperature, and system pH were investigated in the MB batch adsorption experiments. The results showed that the modification method increased the specific surface area of RM material from 16.72 to 414.47 m2/g. The maximum adsorption capacity of MRM for MB was 280.18 mg/g under the conditions of initial MB concentration of 1000 mg/L, reaction time of 300 min, temperature of 25 â, and natural pH of 6.06. Meanwhile, the adsorption kinetics and equilibrium isotherms were demonstrated to fit well with the pseudo-second-order kinetic model and Temkin isotherm, respectively. This study provides a new method for the valorization of RM and demonstrates that MRM can be used as a low cost and environmentally friendly potential adsorbent for the removal of MB from wastewater.
RESUMO
Aquatic animals frequently undergo feed deprivation and starvation stress. It is well-known that the gut microbiota and the gut-brain short neuropeptide F (sNPF) play essential roles in diet restriction. Therefore, investigating the responses of the gut microbiota and sNPF can enhance our understanding of physiological adaptations to feed deprivation and starvation stress. In this study, we examined the alterations in the gut microbiota of juvenile mud crabs under feed deprivation and starvation conditions. The results reveal differences in the richness and diversity of gut microbiota among the satisfied, half food, and starvation groups. Moreover, the microbial composition was affected by starvation stress, and more than 30 bacterial taxa exhibited significantly different abundances among the three feeding conditions. These results indicate that the diversity and composition of the gut microbiota are influenced by diet restriction, potentially involving interactions with the gut-brain sNPF. Subsequently, we detected the location of sNPF in the brains and guts of mud crabs through immunofluorescence and investigated the expression profile of sNPF under different feeding conditions. The results suggest that sNPF is located in both the brains and guts of mud crabs and shows increased expression levels among different degrees of diet restriction during a 96 h period. This study suggested a potential role for sNPF in regulating digestive activities and immunity through interactions with the gut microbiota. In conclusion, these findings significantly contribute to our understanding of the dynamic changes in gut microbiota and sNPF, highlighting their interplay in response to diet restriction.
RESUMO
In this study, the safety of a red mud-loess mixture (RM-L) for the remediation of groundwater polluted by acid mine drainage (AMD) containing Cd(II) in mining areas was systematically analyzed and clarified. The effects of the initial concentration, flow rate, and packing height on the breakthrough performance and longevity of RM-L as a permeable reactive barrier (PRB) packing material were explored by column tests. The results show that the breakthrough time, saturation time, and adsorption capacity of Cd(II) in RM-L increased with decreasing initial concentration and flow rate, as well as increasing packing height. Moreover, RM-L had a long-term effective acid buffering capacity for acidic wastewater containing Cd(II). An increase in the packing height led to a longer longevity of the PRB than the theoretical value. In addition, the speciation of Cd on RM-L was dominated by carbonate form and iron-manganese oxide form. The surface of the RM-L particles evolved from a dense lamellar structure to small globular clusters after purifying the acidic wastewater containing Cd(II), due to the corrosion of H+ and the reoccupation and coverage by increasingly enriched adsorbates and precipitates of heavy metal ions.
Assuntos
Cádmio , Águas Residuárias , Poluentes Químicos da Água , Cádmio/química , Poluentes Químicos da Água/química , Águas Residuárias/química , Adsorção , Purificação da Água/métodos , Eliminação de Resíduos Líquidos/métodos , Mineração , Concentração de Íons de HidrogênioRESUMO
Barium (Ba) dissolution and mobilization in groundwater are predominantly controlled by sulfate because of the low solubility of barium sulfate (BaSO4) minerals. Naturally present at low concentrations in groundwater, elevated concentrations of Ba can occur as a result of anthropogenic activities, including use of barite in drill operations, and geogenic sources such as leaching from geological formations. No toxicity data exist for Ba with groundwater organisms (stygofauna) to assess the risk of elevated Ba concentrations. The present study measured Ba toxicity to two stygobiont Cyclopoida species: one collected from Wellington and the other from Somersby, New South Wales, Australia. Toxicity was measured as cyclopoid survival over 2, 4, 7, 14, 21, and 28 days in waters of varying sulfate concentration (<1-100 mg SO4/L). When sulfate was present, dissolved Ba concentrations decreased rapidly in toxicity test solutions forming a BaSO4 precipitate until dissolved sulfate was depleted. Barium in excess of sulfate remained in the dissolved form. The toxicity of Ba to cyclopoids was clearly attributed to dissolved Ba. Precipitated Ba was not toxic to the Wellington cyclopoid species. Toxicity values for dissolved Ba for the Wellington and Somersby cyclopoid species included a (21-day) no-effect concentration of 3.3 mg/L and an effective concentration to cause 5% mortality of 4.8 mg/L (at 21 days). Elevated dissolved Ba concentrations due to anthropogenic and/or biogeochemical processes may pose a risk to groundwater organisms. Further toxicity testing with other stygobiont species is recommended to increase the data available to derive a guideline value for Ba that can be used in contaminant risk assessments for groundwaters. Environ Toxicol Chem 2024;00:1-14. © 2024 The Author(s). Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.
RESUMO
Red mud is a promising candidate for promoting the incineration of Refuse Derived Fuel (RDF) and stabilizing the resulting incineration ash. The combustion conditions, notably temperature, significantly steers the migration and transformation of harmful metal components during combustion, and ultimately affect their retention and speciation in the ash residue. The study attempted to investigate the effect of co-combustion temperature on the enrichment and stability of Cr, Ni, Cu, Zn, Cd and Pb within bottom ashes, and to reveal the underlined promotion mechanism of red mud addition. As temperature increased, red mud's active components formed a robust matrix, helping the formation, melting, and vitrification of silicates and aluminosilicates in the bottom ashes. The process significantly contributed to the encapsulation and stabilization of heavy metals such as Ni, Cu, Zn, Cd, and Pb, with their residual fractions ascending to 71.37%, 55.75%, 74.78%, 84.24%, and 93.54%, respectively. Conversely, high temperatures led to an increase in the proportion of Cr in the extremely unstable acid-soluble fraction of the bottom ashes, reaching 31.52%, posing a heightened risk of environmental migration. Considering the stability of heavy metals in the bottom ashes and the combustion characteristics, 800 °C is identified as the optimal temperature for the co-combustion of RDF and red mud, balancing efficiency and environmental safety. The findings will provide valuable insights for the co-utilization strategy of RDF and red mud, contributing to more informed decision-making in waste-to-energy processes.
RESUMO
In order to reduce the negative impact on the environment caused by the massive accumulation of red mud (RM) and Yellow River sand (YRS), new alkali-excited granulated blast-furnace slag (GGBS)/RM/YRS (AGRY) geopolymer cementitious materials were prepared by combining RM and YRS with GGBS in different ratios and using sodium silicate as the alkali exciter. The effects of YRS dosage and different curing conditions on the mechanical properties, hydration products, and pore structure of cementitious materials were investigated and analyzed in terms of cost and carbon emissions. The results showed that when the dosage of YRS was 40%, the compressive strength of the prepared AGRY cementitious material could reach 48.8 MPa at 28 d under standard curing, which showed mechanical properties comparable to those of the cementitious material without YRS. The cementitious material has a more compact internal structure, and the combination of RM and YRS promotes the chemical reaction of Al and Si elements and generates the (N, C)-A-S-H gel products, which are the key to the strength enhancement of the cementitious material. In addition, the prepared cementitious material is only 90% of the cement cost for the same strength and has low carbon emission accounting for only 43% of the cement carbon emission. This study not only provides a new way for the resource utilization of RM and YRS, but also contributes an excellent new environmentally friendly material for the construction industry to achieve the goal of low carbon development.
RESUMO
Red mud (RM), a hazardous solid waste generated in the alumina production process, of which the mineral composition is mainly hematite, is unable to be applied directly in the cement industry due to its high alkalinity. With the rise of geopolymers, RM-based grouting materials play an essential role in disaster prevention and underground engineering. To adequately reduce the land-based stockpiling of solid wastes, ultrafine calcium oxide, red mud, and slag were utilized as the main raw materials to prepare geopolymers, the C-R-S (calcium oxide-red mud-slag) grouting cementitious materials. The direct impact of red mud addition on the setting time, fluidity, water secretion, mechanical properties, and rheological properties of C-R-S were also investigated. In addition, a scanning electron microscope (SEM), X-ray diffraction (XRD), three-dimensional CT (3D-CT), Fourier transform infrared spectroscopy (FT-IR), and other characterization techniques were used to analyze the microstructure and polymerization mechanism. The related results reveal that the increase in red mud addition leads to an enhanced setting time, and the C-R-S-40 grouting cementitious material (40% red mud addition) exhibits the best fluidity of 27.5 cm, the lowest water secretion rate of 5.7%, and a high mechanical strength of 57.7 MPa. The C-R-S polymer grout conforms to the Herschel-Bulkley model, and the fitted value of R2 is above 0.99. All analyses confirm that the preparation process of C-R-S grouting cementitious material not only substantially improves the utilization rate of red mud, but also provides a theoretical basis for the high-volume application of red mud in the field of grouting.
RESUMO
The aim of this study was to conduct a thorough scientific investigation into the similarities and differences in the quality of the cellars of different Luzhou-flavor liquor wineries in Yibin production area and the reasons for them. This study analyzed cellar mud samples from five wineries in Yibin production area. The analysis of volatile flavor compounds was carried out using headspace solid-phase microextraction and gas chromatography-mass spectrometry. The bacterial and archaeal community structures and their correlations were analyzed by high-throughput sequencing. The study indicates that the Distillery A had the highest levels of ammonium nitrogen and effective phosphorus, Distillery F had the highest humus levels, and Distillery I had the highest pH levels. The community structure of the principal bacterial and archaeal communities in the five subterranean clays exhibited similarity, and all samples were dominated by Firmicutes as the primary bacterial group. However, there was variation in bacterial abundance. The cellar mud also has obvious regional differences, and there are three genera of differentially dominant archaea in the archaea. In summary, significant differences were observed in the physicochemical indexes of bacterial and archaeal abundance across all five samples. These differences led to variations in both the content and composition of volatile constituents.
RESUMO
The treatment, disposal, and resource utilization of waste mud are challenges for engineering construction. This study investigates the road performance of waste mud-solidified soil and explains how solidifying materials influence the strength and deformation characteristics of waste mud. Unconfined compressive strength tests, consolidated undrained triaxial shear tests, resonant column tests, and consolidation compression tests were conducted to evaluate the solidification effect. The test results show that with an increase in cement content from 5 to 9%, the unconfined compressive strength of the waste mud-solidified soil increased by over 100%, the curing time was extended from 3 to 28 days, and the unconfined compressive strength increased by approximately 70%. However, an increase in initial water content from 40 to 60% reduced the unconfined compressive strength by 50%. With the increase of cement content from 5 to 9%, the cohesion and friction angles increased by approximately 78% and 24%, respectively. The initial shear modulus under dynamic shear increased by approximately 38% and the shear strain corresponding to a damping ratio decay to 70% of the initial shear modulus decreased by nearly 11%. The compression coefficient decreased by approximately 55%. Scanning electron microscopy and X-ray diffraction tests showed that a higher cement content led to the formation of more hydration reaction products, especially an increase in the content of AlPO4, which can effectively fill the pores between soil particles, enhance the bonding between soil particles, and form a skeleton with soil particles to improve compactness. Consequently, the strength of the waste mud-solidified soil increased significantly while its compressibility decreased. This study can provide data support for dynamic characteristics of waste mud solidified soil subgrade.
RESUMO
Ecdysis-triggering hormone (ETH) is a neuropeptide hormone characterized by a conserved KxxKxxPRx amide structure widely identified in arthropods. While its involvement in the regulation of molting and reproduction in insects is well-established, its role in crustaceans has been overlooked. This study aimed to de-orphanise a receptor for ETH in the mud crab Scylla paramamosain and explore its potential impact on ovarian development. A 513-amino-acid G protein-coupled receptor for ETH (SpETHR) was identified in S. paramamosain, exhibiting a dose-dependent activation by SpETH with an EC50 value of 75.18 nM. Tissue distribution analysis revealed SpETH was in the cerebral ganglion and thoracic ganglion, while SpETHR was specifically expressed in the ovary, hepatopancreas, and Y-organ of female crabs. In vitro experiments demonstrated that synthetic SpETH (at a concentration of 10-8 M) significantly increased the expression of SpVgR in the ovary and induced ecdysone biosynthesis in the Y-organ. In vivo experiments showed a significant upregulation of SpEcR in the ovary and Disembodied and Shadow in the Y-organ after 12 h of SpETH injection. Furthermore, a 16-day administration of SpETH significantly increased 20E titers in hemolymph, gonadosomatic index (GSI) and oocyte size of S. paramamosain. In conclusion, our findings suggest that SpETH may play stimulatory roles in ovarian development and ecdysone biosynthesis by the Y-organ.
RESUMO
Waste tires (WT) are produced in millions of tons per annum and their safe disposal is always a major environmental challenge because of fire hazards and the increasing cost of landfills. WT has high organic matter content that can be converted into fuels and chemicals if suitable technologies can be developed. Herein we report the in situ catalytic pyrolysis of WT using formulated red mud catalyst to produce low sulfur fuel that can be fractionated or can be used without fractionation. The in situ catalytic pyrolysis was conducted at 450-550 °C using formulated red mud catalyst. The yield of pyrolysis liquids ranged from 35 to 40 wt%. The liquid was very rich in limonene and long chain aliphatic hydrocarbons. The catalyst was effective in removing the sulfur compounds in the oil through reactive adsorption desulfurization mechanism. The sulfur species reacted with hematite, calcite, sodium hydroxide, and zinc oxide to form sulfides and were retained in the catalyst. The minimum sulfur content of the catalytic pyrolysis oil was 0.38 wt%. After catalyst regeneration in air through combustion, the catalyst activity was restored, and the catalyst was reused.
RESUMO
Microbial communities of terrestrial mud volcanoes are involved in aerobic and anaerobic methane oxidation, but the biological mechanisms of these processes are still understudied. We have investigated the taxonomic composition, rates of methane oxidation, and metabolic potential of microbial communities in five mud volcanoes of the Taman Peninsula, Russia. Methane oxidation rates measured by the radiotracer technique varied from 2.0 to 460 nmol CH4 cm-3 day-1 in different mud samples. This is the first measurement of high activity of microbial methane oxidation in terrestrial mud volcanos. 16S rRNA gene amplicon sequencing has shown that Bacteria accounted for 65-99% of prokaryotic diversity in all samples. The most abundant phyla were Pseudomonadota, Desulfobacterota, and Halobacterota. A total of 32 prokaryotic genera, which include methanotrophs, sulfur or iron reducers, and facultative anaerobes with broad metabolic capabilities, were detected in relative abundance >5%. The most highly represented genus of aerobic methanotrophs was Methyloprofundus reaching 36%. The most numerous group of anaerobic methanotrophs was ANME-2a-b (Ca. Methanocomedenaceae), identified in 60% of the samples and attaining relative abundance of 54%. The analysis of the metagenome-assembled genomes of a community with high methane oxidation rate indicates the importance of CO2 fixation, Fe(III) and nitrate reduction, and sulfide oxidation. This study expands current knowledge on the occurrence, distribution, and activity of microorganisms associated with methane cycle in terrestrial mud volcanoes.