Characteristics of catalytic destruction of dichloromethane and ethyl acetate mixture over HxPO4-RuOx/CeO2 catalyst.

Catalytic destruction is an ascendant technology for the abatement of volatile organic compounds (VOCs) originating from solvent-based industrial processes. The varied composition tends to influence each VOC's catalytic behavior in the reaction mixture. We investigated the catalytic destruction of multi-component VOCs including dichloromethane (DCM) and ethyl acetate (EA), as representatives from pharmaceutical waste gases, over co-supported HxPO4-RuOx/CeO2 catalyst. A mutual inhibitory effect relating to concentrations because of competitive adsorption was verified in the binary VOCs oxidation and EA posed a more negative effect on DCM oxidation owing to EA's superior adsorption capacity. Preferential adsorption of EA on acidic sites (HxPO4/CeO2) promoted DCM activation on basic sites (O2-) and the dominating EA oxidation blocked DCM's access to oxidation centers (RuOx/CeO2), resulting in boosted monochloromethane yield and increased chlorine deposition for DCM oxidation. The impaired redox ability of Ru species owing to chlorine deposition in turn jeopardized deep oxidation of EA and its by-products, leading to increased gaseous by-products such as acetic acid originating from EA pyrolysis. Notably, DCM at low concentration slightly promoted EA conversion at low temperatures with or without water, consistent with the enhanced EA adsorption in co-adsorption analyses. This was mainly due to that DCM impeded the shielding effect of hydrolysate deposition from rapid EA hydrolysis depending on the decreased acidity. Moreover, water benefited EA hydrolysis but decreased CO2 selectivity while the generated water derived from EA was likely to affect DCM transformation. This work may provide theoretical guidance for the promotion of applied catalysts toward industrial applications.

Integrated doped-Ru electrocatalyst with excellent H adsorption-desorption and active site on hollow tubular structures for boosting efficient hydrogen evolution.

Electrochemical water splitting for hydrogen production is an ideal process for clean energy production. However, highly active and low-cost electrocatalysts are essential and challenging. In this work, a multi-component Cu-based catalyst (Ru-M-C-Cu), synergized with ruthenium (Ru) heteroatom doping, was synthesized via a facile immersion-calcination-immersion method. Based on the cotton biomass substrate, a hollow tubular structure was obtained. By virtue of its distinctive structure and high carbon content, cotton biomass assumed a dual role as a sacrificial template and a reducing agent in the eco-friendly synthesis of electrocatalysts, which was instrumental in the creation of a multi-component system augmented by heteroatom doping. The multi-component system was constructed by in-situ transformation and redox reaction during calcination in an oxygen-free environment. The Ru-M-C-Cu catalyst exhibited a competitive overpotential of 108 mV at a current density of 10 mA cm-2 for alkaline hydrogen evolution reaction (HER). The satisfactory catalytic performance of Ru-M-C-Cu can be attributed to the fact that the Ru-O-Cu catalytic centers enhanced the adsorption and desorption abilities of the Cu-O active sites toward hydrogen. Furthermore, the hollow tubular structure allowed the electrolyte to make full contact with the active sites of the Ru-M-C-Cu catalyst, thus accelerated the HER kinetics. The catalyst showed structural and chemical stability after a 12-hour successive test. Besides, the production cost of Ru-M-C-Cu was significantly reduced by 99.1 % than that of commercial 20 % Pt/C, showing the potential as an alternative catalyst by offering a more accessible and sustainable source. This work provides a new design of sustainable low-budget electrocatalysts with the proposed strategies expected for producing clean and renewable hydrogen energy.

Comparing the Effectiveness of Two Kinds of Reading Interventions on Reading Outcomes in Third to Fifth Grade Farsi Speaker Students with Dyslexia: An Exploratory Study.

Background: This research marks the exploration into comparing the effectiveness of two reading interventions in improving reading outcomes for third to fifth-grade Farsi-speaking students with dyslexia. Methods: In this randomized control trial study, twenty students in Tehran were randomly assigned to a multi-component group and a comprehension-based intervention group, each receiving 36 sessions of 45 minutes. The effectiveness of the interventions was evaluated using adjusted mean differences with a one-way ANCOVA. Results: The results revealed the comprehension-based intervention's superior effect size across most outcomes, except for the letters string. The effect size was large for word reading 0.93 (CI -0.002 to 1.85), medium for phoneme deletion 0.67 (CI -0.23 to 1.5), small for text comprehension 0.25 (CI -0.62 to 1.13), and trivial for both rhyme identification 0.1 (-0.77 to 0.98) and non-word reading 0.11 (CI -0.76 to 0.98). The multi-component intervention had a greater effect size on letters string than the other intervention, although it was small -0.21 (CI -1.09 to 0.66). Conclusion: The study concluded that comprehension-based intervention was more effective for Farsi-speaking students with dyslexia in grades 3-5, emphasizing the need for diverse intervention approaches to address their specific needs.

Mangrove tree aerial root extract mediated green synthesis of Ag/Fe3O4/rGO nanocomposite and its application as a catalyst for one pot synthesis of 7-phenyl-6H,7H-benzo[4,5]imidazo[2,1-b]chromeno[4,3-d][1,3]thiazin-6-one derivatives.

In this study, we report the green preparation of magnetically separable Ag/Fe3O4/rGO nanocomposites using mangrove tree aerial root extract as a stabilising agent. The morphology, size, chemical composition, magnetic property and other characteristic parameters of synthesised Ag/Fe3O4/rGO nanocomposite were determined by analytical techniques like Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). The results proved that mangrove tree aerial root extract has the ability to reduce Ag+ ions, graphene oxide (GO) to Ag nanoparticle and reduced graphene oxide (rGO), respectively. The prepared Ag/Fe3O4/rGO nanocomposite was used successfully as a prompt catalyst for synthesis of 7-phenyl-6H,7H-benzo[4,5]imidazo[2,1-b]chromeno[4,3-d][1,3]thiazin-6-one derivatives by one-pot multi-component reaction of 4-hydroxycoumarin (10 mmol), 2-mercaptobenzimidazole (10 mmol) and different arylaldehyde (10 mmol) in the presence of ethanol (10 ml) as an eco-benign solvent at reflux condition. By utilising this protocol, we have constructed 7-phenyl-6H,7H-benzo[4,5]imidazo[2,1-b]chromeno[4,3-d][1,3]thiazin-6-one derivatives in good to excellent yield of 80-90%. This synthesis involves the formation of C-C, C-N and C-S bonds. The synthesised organic heterocyclic compounds were examined for the green matrix properties such as atom economy (AE), E-factor and product mass intensity (PMI). This green protocol is of big interest due to employing simple, non-toxic heterogeneous, separable, reusable Ag/Fe3O4/rGO as an eco-safe heterogeneous catalyst and environmentally benign ethanol as a green solvent without the use of any harmful mineral acid and toxic transition metal catalyst.

Applications of Clauson-Kaas Reaction in Organic Synthesis.

Pyrrole-embedded organic molecules received a considerable importance due to their numerous biological and material applications. Hence, several synthetic strategies have been devised for the construction of diverse pyrrole analogues over the years. Among these, the Clauson-Kaas reaction is one of the most widely used protocols for the synthesis of various N-substituted pyrroles. This review briefly describes the Clauson-Kaas reaction along with modifications and a detailed account on its applications in the various sectors of organic synthesis.

The Dawn till Dusk of phytopharmaceuticals.

Herbal products and their formulations have a large market at the global level. A significant portion of the worldwide population relies upon herbal treatment. Their apparent non-toxic and cost-effective nature appeals to the population and drives researchers to pursue them for drug development. However, due to the lack of scientific evidence, their conventional preparation, poor regulation and control make these an unseen threat to the people. There has been a long-standing argument that allopathic medicines are better than herbal medicines due to their specificity and precision. To compete with modern medicines, a concept of science-based phytopharmaceutical drugs was introduced through a draft amendment notified to the Drugs and Cosmetics 1940 and Rules 1945. The amendment has introduced a definition for botanicals and their scientific evaluation for quality safety and efficacy by the Central Drugs Standard and Control Organization (CDSCO) office as a marketing authorization requirement. The present article discusses the advantages and challenges faced in the development of phytopharmaceuticals, and how they differ from dietary supplements and herbal drugs. It also gives consolidated information on Phytopharmaceuticals and their regulatory and Pharmacopoeial status with an exemplary PPI monograph - Aegle marmelos. The plant selection was done based on extensive research using the PRISMA approach. A detailed view of the opportunities and challenges provided by phytopharmaceuticals is explained in the present review.

Metabolic network rewiring and temperature-dependent regulation for enhanced 3-dehydroshikimate production in Escherichia coli.

The cyclohexane organic acid 3-dehydroshikimate (DHS) has potent antioxidant activity and is widely utilised in chemical and pharmaceutical industries. However, its production requires a long fermentation with a suboptimal yield and low productivity, and a disproportionate growth-to-production ratio impedes the upscaling of DHS synthesis in microbial cell factories. To overcome these limitations, competing and degradation pathways were knocked-out and key enzymes were balanced in an engineered Escherichia coli production strain, resulting in 12.2 g/L DHS. Furthermore, to achieve equilibrium between cell growth and DHS production, a CRISPRi-based temperature-responsive multi-component repressor system was developed to dynamically control the expression of critical genes (pykF and aroE), resulting in a 30-fold increase in DHS titer. After 33 h fermentation in 5 L bioreactor, the DHS titer, productivity and yield reached 94.2 g/L, 2.8 g/L/h and 55 % glucose conversion, respectively. The results provided valuable insight into the production of DHS and its derivatives.

Leveraging Multi-Sectoral Partnership for Colorectal Cancer Education and Screening in the African American Community: A Protocol and Preliminary Results.

Colorectal cancer (CRC) awareness and screening rates are still low in African Americans (AAs), especially for those who do not have regular access to health care. We established a multi-sector community partnership between academia, health system, cancer advocacy, and local county treasurer's office (CTO), to test a pilot CRC screening intervention using a tailored educational brochure and fecal immunochemical test (FIT). Participants were recruited at a local CTO in an urban midwestern region. Once eligible, participants were assigned to 2-by-2 intervention arms by educational strategy (brochure vs. no brochure) and FIT provision strategy (direct provision by onsite staff vs. indirect provision via phone/online request). We compared the effect of different strategies on FIT return rates. Of 1500 individuals approached, 212 were eligible for the study. The final sample consisted of 209 participants who were predominantly men (57%) and AAs (85%). No differences were found in the return rates by educational brochure (24% [brochure] vs. 23% [no brochure]; p = 0.82). In regard to FIT provision strategy, direct FIT provision yielded higher return rates than indirect provision (31% vs. 15%; p = 0.01). When the four groups were compared, direct provision with education brochure yielded the highest return rates (33.9%), followed by direct provision only (27.5%), indirect provision only (18%), and indirect provision with a brochure (12.2%). For community-based CRC screening intervention using stool-based test, the direct provision of FIT kits with educational brochure outperforms the other three strategies.

Detection of egg white allergy in children by specific IgE microarray chemiluminescence immunoassay.

BACKGROUND: Allergen testing has emerged as a pivotal component in prevention and treatment strategies for allergic diseases among children and the utilization of specific IgE (sIgE) through a fully automated chemiluminescent microarray immunoassay (CLMIA) has emerged as a promising trend in the simultaneous detection of multiple allergenic components of children. METHODS: The accuracy and reliability of CLMIA were verified using children's serum samples that concentrated on allergens. the allergens. The clinical diagnostic practicability of CLMIA was assessed through comprehensive evaluations including measurements of the limit of detection (LOD), intra-batch, and inter-batch precision, linearity analysis, the cross-contamination rate, and the concordance rate with the Phadia system. RESULTS: After the optimization process of CLMIA, the LODs for allergens were calculated to be below 0.01 kU/L, demonstrating the high sensitivity of CLMIA. All components exhibited good linearity within the range of 0.1-100.0 kU/L and the coefficient of determinations (R2 > 0.99). The data of intra-batch precision (<10 %) and inter-batch data (<15 %) illustrated the high reproducibility of CLMIA. The cross-contamination rates for allergens (<0.5 %) showed the high accuracy of CLMIA without interfering. The positive concordance rate between CLMIA and the Phadia system exceeds 90 % with a good negative concordance rate (>85 %) and the Kappa coefficients (>0.8), suggesting the close alignment of CLMIA and the Phadia system and showing the satisfactory clinical potential of CLMIA in children's allergy disease. CONCLUSIONS: The application of CLMIA has been promising in allergen testing, especially for detecting multiple allergenic components in children.

On the Benefits of Using Maximal Reliability in Educational and Behavioral Research.

This note is concerned with the benefits that can result from the use of the maximal reliability and optimal linear combination concepts in educational and psychological research. Within the widely used framework of unidimensional multi-component measuring instruments, it is demonstrated that the linear combination of their components that possesses the highest possible reliability can exhibit a level of consistency considerably exceeding that of their overall sum score that is nearly routinely employed in contemporary empirical research. This optimal linear combination can be particularly useful in circumstances where one or more scale components are associated with relatively large error variances, but their removal from the instrument can lead to a notable loss in validity due to construct underrepresentation. The discussion is illustrated with a numerical example.

Enhanced Water Resistance of TiO2-GO-SMS-Modified Soil Composite for Use as a Repair Material in Earthen Sites.

Most earthen sites are located in open environments eroded by wind and rain, resulting in spalling and cracking caused by shrinkage due to constant water absorption and loss. Together, these issues seriously affect the stability of such sites. Gypsum-lime-modified soil offers relatively strong mechanical properties but poor water resistance. If such soil becomes damp or immersed in water, its strength is significantly reduced, making it unviable for use as a material in the preparation of earthen sites. In this study, we achieved the composite addition of a certain amount of sodium methyl silicate (SMS), titanium dioxide (TiO2), and graphene oxide (GO) into gypsum-lime-modified soil and analyzed the microstructural evolution of the composite-modified soil using characterization methods such as XRD, SEM, and EDS. A comparative study was conducted on changes in the mechanical properties of the composite-modified soil and original soil before and after immersion using water erosion, unconfined compression (UCS), and unconsolidated undrained (UU) triaxial compression tests. These analyses revealed the micro-mechanisms for improving the waterproof performance of the composite-modified soil. The results showed that the addition of SMS, TiO2, and GO did not change the crystal structure or composition of the original soil. In addition, TiO2 and GO were evenly distributed between the modified soil particles, playing a positive role in filling and stabilizing the structure of the modified soil. After being immersed in water for one hour, the original soil experienced structural instability leading to collapse. While the water absorption rate of the composite-modified soil was only 0.84%, its unconfined compressive strength was 4.88 MPa (the strength retention rate before and after immersion was as high as 93.1%), and the shear strength was 614 kPa (the strength retention rate before and after immersion was as high as 96.7%).

One-Pot, Multi-Component Green Microwave-Assisted Synthesis of Bridgehead Bicyclo[4.4.0]boron Heterocycles and DNA Affinity Studies.

Anthranilic acids, salicylaldehydes and arylboronic acids reacted in EtOH/H2O (1/3) at 150 °C under microwave irradiation for 1 h to give, in excellent yields and purity, twenty-three bridgehead bicyclo[4.4.0]boron heterocycles via one-pot, three-component green synthesis. The scope and the limitations of the reactions are discussed in terms of the substitution of ten different anthranilic acids, three salicylaldehydes and three arylboronic acids. The replacement of salicylaldehyde with o-hydroxyacetophenone demanded a lipophilic solvent for the reaction to occur. Eight novel derivatives were isolated following crystallization in a toluene-containing mixture that included molecular sieves. The above one-pot, three-component reactions were completed under microwave irradiation at 180 °C within 1.5 h, thus avoiding the conventional prolonged heating reaction times and the use of a Dean-Stark apparatus. All derivatives were studied for their affinity to calf thymus DNA using proper techniques like viscosity and UV-vis spectroscopy, where DNA-binding constants were found in the range 2.83 × 104-8.41 × 106 M-1. Ethidium bromide replacement studies using fluorescence spectroscopy indicated Stern-Volmer constants between 1.49 × 104 and 5.36 × 104 M-1, whereas the corresponding quenching constants were calculated to be between 6.46 × 1011 and 2.33 × 1012 M-1 s-1. All the above initial experiments show that these compounds may have possible medical applications for DNA-related diseases.

High-Sensitivity and In Situ Multi-Component Detection of Gases Based on Multiple-Reflection-Cavity-Enhanced Raman Spectroscopy.

Raman spectroscopy with the advantages of the in situ and simultaneous detection of multi-components has been widely used in the identification and quantitative detection of gas. As a type of scattering spectroscopy, the detection sensitivity of Raman spectroscopy is relatively lower, mainly due to the low signal collection efficiency. This paper presents the design and assembly of a multi-channel cavity-enhanced Raman spectroscopy system, optimizing the structure of the sample pool to reduce the loss of the laser and increase the excitation intensity of the Raman signals. Moreover, three channels are used to collect Raman signals to increase the signal collection efficiency for improving the detection sensitivity. The results showed that the limits of detection for the CH4, H2, CO2, O2, and N2 gases were calculated to be 3.1, 34.9, 17.9, 27, and 35.2 ppm, respectively. The established calibration curves showed that the correlation coefficients were all greater than 0.999, indicating an excellent linear correlation and high level of reliability. Meanwhile, under long-time integration detection, the Raman signals of CH4, H2, and CO2 could be clearly distinguished at the concentrations of 10, 10, and 50 ppm, respectively. The results indicated that the designed Raman system possesses broad application prospects in complex field environments.

The influence of eight cognitive training regimes upon cognitive screening tool performance in post-stroke survivors: a network meta-analysis.

Background: Traditional meta-analysis offers only direct comparative evidence. The optimal cognitive training for poststroke cognitive impairment (PSCI) remains largely undetermined. Objectives: This study aims to assess and compare the effectiveness of selected cognitive training methods for PSCI patients and to identify and rank the most effective intervention programs. Methods: Searches were conducted in PubMed, Embase, Cochrane Library, Web of science, China National Knowledge Infrastructure, China Science and Technology Journal Database, Wanfang Database, and China Biomedical Database for randomized controlled trials up to September 30, 2023. Two researchers independently performed literature screening, data extraction, and quality assessment. Network meta-analysis was utilized to synthesize the main findings. The primary outcome focused on the intervention's impact on subjective cognitive function, with secondary outcomes including effects on activities of daily living, motor function, and functional independence. This study is registered with PROSPERO (CRD42023463282). Results: Fifty eligible randomized controlled trials were identified, revealing eight distinct interventions. These interventions collectively demonstrate efficacy in enhancing cognition. Traditional cognitive training significantly improves overall cognitive function, daily living function, motor function, and functional independence. In Loewenstein Occupational Therapy Cognitive Assessment, Barthel Index, Fugl-Meyer Assessment, and Functional Independence Measure scales, a combination of computer-based and traditional cognitive training outperformed the conventional control group MD = 29.97 (95%CI: 16.3, 44.2), MD = 18.67 (95%CI: 9.78, 27.45), MD = 28.76 (95%CI: 5.46, 51.79) and MD = 42.2 (95%CI: 5.25, 78.99). In the MMSE scale, virtual reality cognitive training combined with traditional training was most effective MD = 8.01 (95%CI: 3.6, 12.4). On the MoCA scale, the combination of exercise and cognitive training showed superior results MD = 6.68 (95%CI: 2.55, 10.78). Only the combined computer-based and traditional cognitive training, as well as traditional cognitive training alone, significantly enhanced functional independence, with no notable differences in other pairwise interventions. Conclusion: The network meta-analysis suggests that augmenting traditional training with other modalities may enhance overall effectiveness. Specifically, interventions incorporating computer-based cognitive training appear to surpass other methods in improving cognition, daily living function, motor skills, and functional independence. The findings of this network meta-analysis provide evidence-based guidance for clinical decision-making. Systematic Review Registration: https://www.crd.york.ac.uk/PROSPERO/, identifier in PROSPERO (CRD42023463282).

Real-time simulation for multi-component biomechanical analysis using localized tissue constraint progressive transfer learning.

In virtual surgical training, it is crucial to achieve real-time, high-fidelity simulation of the tissue deformation. The anisotropic and nonlinear characteristics of the organ with multi-component make accurate real-time deformation simulation difficult. A localized tissue constraint progressive transfer learning method is proposed in this paper, where the base-compensated dual-output transfer learning strategy and the localized tissue constraint progressive learning architecture are developed. The proposed strategy enriches the multi-component biomechanical dataset to fully represent complex force-displacement with minimal high-quality data. Meanwhile, the proposed architecture adopts focused and progressive model to accurately describe tissues with varied biomechanical properties rather than singular homogeneous model. We made comparison with 4 state-of-the-art (SOTA) methods in simulating multi-component biomechanical deformations of organs with 100 pairs of testing data. Results show that the accuracy of our method is 50% higher than other methods in different validation matrix. And our method can stably simulate the deformations in 0.005 s per frame, which largely improves the computing efficiency.

Synthesis of cobalt- ferrite and zinc oxide metal nanoparticles based-bentonite using SDS and their investigation as catalysts in synthesis of benzylbarbiturocoumarins.

In this research, a suitable and efficient CoFe2O4@ZnO@Bentonite nano-catalyst was designed and synthesized by using zinc oxide (ZnO) and cobalt ferrite (CoFe2O4) nanoparticles and bentonite by microwave irradiation. Characteristics of the synthesized nanocomposite were investigated by Fourier transform infrared (FT-IR), scanning electron microscope (SEM), energy dispersive X-ray (EDX), transmission electron microscope (TEM), X-ray diffraction (XRD), Bruner- Emmett-Teller (BET) and vibrating sample magnetometer (VSM) techniques. The produced catalyst was effectively employed as a supported solid acid catalyst in mildly agitated three-component reactions involving aromatic aldehydes, 4-hydroxycoumarin, and 1,3-dimethyl-barbituric acid in a single pot to produce benzylbarbiturocoumarins. Starting materials were condensed via three C-C bond formation by CoFe2O4@ZnO@Bentonite as an efficient, recyclable, and environmentally safe nanocatalyst to obtain target products. The advantages of this method include using a natural substrate, small amounts of catalyst, aqueous media, performing reactions at ambient temperature, simple separation and purification of products, and good yields with short reaction times.

Establishment of Dissolution Test Method for Multi-Components in Traditional Chinese Medicine Preparations Based on In Vitro-In Vivo Correlation.

In this study, a multi-component integrated dissolution evaluation system of Yuanhu Zhitong tablets (YZTs) was established based on in vitro and in vivo correlation (IVIVC). The dissolution tests of five quality markers (Q-markers), including tetrahydropalmatine, α-allocryptopine, protopine, corydaline, and byakangelicin, in YZTs were conducted under different dissolution conditions, and pharmacokinetic studies were performed in beagle dogs to construct a correlation model using numerical deconvolution. The data of the five ingredients were integrated in vitro and in vivo according to the biopharmaceutical classification system (BCS) to establish an IVIVC integrating multiple Q-markers. The dissolution media with the best correlation of components were obtained and validated. The results showed that all five components were classified as BCS I compounds, and α-allocryptopine, byakangelicin, tetrahydropalmatine, and corydaline showed good correlation in the paddle method, 75 rpm, with dissolution media of artificial gastric fluid, acetate buffer, acetate buffer and 0.1 M HCl, respectively. Protopine showed good correlation in the paddle method, 100 rpm, with dissolution media of 0.1 M HCl. The integrated BCS I Q-markers showed the best correlation in the medium of acetate buffer. The multi-component integrated dissolution evaluation system established in this experiment accurately predicted the pharmacokinetic data of YZTs by verifying the media, which can be used for the quality control of YZTs. The present study provides an effective and promising strategy for the dissolution evaluation for traditional Chinese medicine preparations.

Role of Quenching Temperature Selection in the Improvement of the Abrasive (Al2O3) Wear Resistance of Hybrid Multi-Component Cast Irons.

In this paper, enhancing the tribological characteristics of novel cast metallic materials-hybrid multi-component cast irons-by applying a strengthening heat treatment is described. The experimental materials were the cast alloys of a nominal composition (5 wt.% W, 5 wt.% Mo, 5 wt.% V, 10 wt.% Cr, 2.5 wt.% Ti, Fe is a balance) supplemented with 0.3-1.1 wt.% C and 1.5-2.5 wt.% B (total of nine alloys). The heat treatment was oil-quenching followed by 200 °C tempering. The quench temperature (QT) varied in the range of 900-1200 °C, with a step of 50 °C (with a 2-h holding at QT). The correlation of the QT with microstructure and properties was estimated using microstructure/worn surface characterization, differential scanning calorimetry, hardness measurement, and three-body-abrasive wear testing (using Al2O3 particles). The as-cast alloys had a multi-phase structure consisting of primary and/or eutectic borocarbide M2(B,C)5, carboborides M(C,B), M7(C,B)3, M3(C,B), and the matrix (ferrite, martensite, pearlite/bainite) in different combinations and volume fractions. Generally, the increase in the quenching temperature resulted in a gradual increase in hardness (maximally to 66-67 HRC) and a decrease in the wear rate in most alloys. This was due to the change in the phase-structure state of the alloys under quenching, namely, the secondary carboboride precipitation, and replacing ferrite and pearlite/bainite with martensite. The wear rate was found to be inversely proportional to bulk hardness. The maximum wear resistance was attributed to QT = 1150-1200 °C, when the wear rate of the alloys was lowered by three to six times as compared to the as-cast state. With the QT increase, the difference in the wear rate of the alloys decreased by three times. The highest abrasive resistance was attributed to the alloys with 1.1 wt.% C, which had a 2.36-3.20 times lower wear rate as compared with that of the reference alloy (13 wt.% Cr cast iron, hardness of 66 HRC). The effects of carbon and boron on hardness and wear behavior are analyzed using the regression models developed according to the factorial design procedure. The wear mechanisms are discussed based on worn surface characterization.

Advances in Nickel-Containing High-Entropy Alloys: From Fundamentals to Additive Manufacturing.

High-entropy alloys (HEAs) are recognized as a class of advanced materials with outstanding mechanical properties and corrosion resistance. Among these, nickel-based HEAs stand out for their impressive strength, ductility, and oxidation resistance. This review delves into the latest advancements in nickel-containing HEAs, covering their fundamental principles, alloy design strategies, and additive manufacturing techniques. We start by introducing HEAs and their unique properties, emphasizing the crucial role of nickel. This review examines the complex relationships between alloy composition, valence electron concentration (VEC), and the resulting crystal structures. This provides insights into design principles for achieving desired microstructures and mechanical properties. Additive manufacturing (AM) techniques like selective laser melting (SLM), electron beam melting (EBM), and laser metal deposition (LMD) are highlighted as powerful methods for fabricating intricate HEA components. The review addresses the challenges of AM processes, such as porosity, fusion defects, and anisotropic mechanical properties, and discusses strategies to mitigate these issues through process optimization and improved powder quality. The mechanical behavior of AM-processed nickel-based HEAs is thoroughly analyzed, focusing on compressive strength, hardness, and ductility. This review underscores the importance of microstructural features, including grain size, phase composition, and deformation mechanisms, in determining the mechanical performance of these alloys. Additionally, the influence of post-processing techniques, such as heat treatment and hot isostatic pressing (HIP) on enhancing mechanical properties is explored. This review also examines the oxidation behavior of nickel-containing HEAs, particularly the formation of protective oxide scales and their dependence on aluminum content. The interplay between composition, VEC, and oxidation resistance is discussed, offering valuable insights for designing corrosion resistant HEAs. Finally, this review outlines the potential applications of nickel-based HEAs in industries such as aerospace, automotive, and energy, and identifies future research directions to address challenges and fully realize the potential of these advanced materials.

Performance Research of Cement Concrete Pavements with a Lower Carbon Footprint.

The growing interest in the use of building materials with a reduced carbon footprint was the aim of this research assessing the impact of four different types of low-emission cements on the properties of cement concretes used for the construction of local roads. This research work attempted to verify the strength characteristics and assess the durability of such solutions, which used the commonly used CEM I 42.5 R pure clinker cement and three multi-component cements: CEM II/A-V 42.5 R, CEM III/A 42.5 N-LH/HSR/NA, and CEM V/A S-V 42.5 N-LH/HSR/NA. Cement was used in a constant amount of 360 kg/m3, sand of 0/2 mm, and granite aggregate fractions of 2/8 and 8/16 mm. This research was carried out in two areas: the first concerned strength tests and the second focused on the area of assessing the durability of concrete in terms of frost resistance F150, resistance to de-icing agents, water penetration under pressure, and an analysis of the air entrainment structure in concrete according to the PN EN 480-11 standard. Analyzing the obtained test results, it can be concluded that the highest compressive strength of more than 70 MPa was obtained for CEM III concrete, 68 MPa for CEM V concrete, and the lowest for CEM I cement after 90 days. After the durability tests, it was found that the smallest decrease in compressive strength after 150 freezing and thawing cycles was obtained for CEM III (-0.9%) and CEM V (-1.4%) concretes. The high durability of concrete is confirmed by water penetration tests under pressure, because for newly designed recipes using CEM II, CEM III, and CEM V, water penetration from 17 mm to 18 mm was achieved, which proves the very high tightness of the concrete. The assessment of the durability of low-emission cements was confirmed by tests of resistance to de-icing agents and the aeration structure performed under a microscope in accordance with the requirements of the PN-EN 480-11 standard. The obtained analysis results indicate the correct structure and minimal spacing of air bubbles in the concrete, which confirms and guarantees the durability of concrete intended for road construction. Concretes designed using CEM V cement are characterized by a carbon footprint reduction of 36%, and for the mixture based on CEM III, we even observed a decrease of 39% compared to traditional concrete. Concrete using CEM II, CEM III, and CEM V cements can be successfully used for the construction of local roads. Therefore, it is necessary to consider changing the requirements of the technical specifications recommended for roads in Poland.