The revealing of the Cyto-genotoxic properties (Allium and MTT) and the effect of chicken meat quality of characterized zein-eugenol nanofibers.

Electrospun zein-based eugenol nanofibers (ZEnF) with diameters (148.19-631.52 nm) were fabricated. Thermal degradation was found as <15 % until 300 °C while the nanofiber diffraction pattern presented three main peaks among the 5o and 45o positions. ZEnF was not only evaluated as non-toxic to cells but also possessed anticancer characteristics revealing with the MCF-7 cell line at 800 µg/mL (reduction: 18.08 %) and 1600 µg/mL (reduction: 41.64 %). Allium tests revealed that ZEnF did not have any adverse impact on the health status (chromosomes-DNA) of exposed organisms. Following the nanofiber coating for chicken meat parts (thigh and breast), it was observed up to 1.25 log CFU/g limitation in total viable bacteria counts (p < 0.05). The sensory score (difference: 3.64 in 10 points scoring on the 6th day of the cold storage) and odor score of chicken meat samples were found to be as higher than control samples (p < 0.05).

Polycaprolactone/gelatin/ZIF-8 nanofiber membrane for advanced guided tissue regeneration in periodontal therapy.

The periodontal tissue regeneration strategy based on guided tissue regeneration (GTR) membranes is an effective therapy for periodontal defects. Traditional GTR membranes, however, primarily serve as physical barriers and lack antimicrobial and osteogenic functions. Herein, we developed a multifunctional nanofiber membrane with zeolitic imidazolate framework-8 nanoparticles (ZIF-8 NPs) loaded in a hydrophilic gelatin layer. The release of Zn2+ from the ZIF-8 NPs effectively promoted bone tissue repair and simultaneously enabled GTR membranes with >99 % antibacterial efficacies against Escherichia coli and Staphylococcus aureus. Additionally, the incorporation of gelatin enhances cellular adhesion and growth. Furthermore, in vivo studies revealed significant bone regeneration, with increased trabecular number and reduced separation. Owing to its multiple functions, excellent biocompatibility and desirable mechanical properties, this membrane has considerable potential in the field of periodontal therapy.

Development of 5-fluorouracil/etoposide co-loaded electrospun nanofibrous scaffold for localized anti-melanoma therapy.

Nanofibrous scaffolds have emerged as promising candidates for localized drug delivery systems in the treatment of cutaneous cancers. In this study, we prepared an electrospun nanofibrous scaffold incorporating 5-fluorouracil (5-FU) and etoposide (ETP) for chemotherapy targeting melanoma cutaneous cancer. The scaffold was composed of polyvinyl alcohol (PVA) and chitosan (CS), prepared via the electrospinning process and loaded with the chemotherapeutic agents. We conducted relevant physicochemical characterizations, assessed cytotoxicity, and evaluated apoptosis against melanoma A375 cells. The prepared 5-FU/ETP co-loaded PVA/CS scaffold exhibited nanofibers (NFs) with an average diameter of 321 ± 61 nm, defect-free and homogenous morphology. FTIR spectroscopy confirmed successful incorporation of chemotherapeutics into the scaffold. Additionally, the scaffold demonstrated a hydrophilic surface, proper mechanical strength, high porosity, and efficient liquid absorption capacity. Notably, sustained and controlled drug release was observed from the nanofibrous scaffold. Furthermore, the scaffold significantly increased cytotoxicity (95%) and apoptosis (74%) in A375 melanoma cells. Consequently, the prepared 5-FU/ETP co-loaded PVA/CS nanofibrous scaffold holds promise as a valuable system for localized eradication of cutaneous melanoma tumors and mitigation of adverse drug reactions associated with chemotherapy.

Production and Characterization of Electrospun Chitosan, Nanochitosan and Hyaluronic Acid Membranes for Skin Wound Healing.

The development of new wound dressings made from biomaterials, which offer a better cost-benefit ratio and accelerate the healing process, is increasing nowadays. Various biopolymers can be electrospun to form functional membranes for wound healing. Therefore, in this study, chitosan and nanochitosan membranes with or without hyaluronic acid were prepared using the electrospinning technique, characterized and evaluated in the healing of skin wounds in rats. Chitosan and nanochitosan solutions, with or without hyaluronic acid, were prepared at concentrations of 1%-4% using PEO (polyethylene oxide) and subjected to the electrospinning process to obtain membranes characterized by scanning electron microscopy (SEM), mechanical tests, and antimicrobial activity. The healing effect of the membranes was evaluated by monitoring the area of the lesions, contraction of the wounds, histologic analysis, and induction of pro-inflammatory cytokine (IL-1 α and TNF-α) production in rats. The nanochitosan and nanochitosan membranes with hyaluronic acid achieved greater fiber diameter and uniformity, resistance, elasticity, and thermal stability, in addition to good adhesion to the wound bed and permeation capacity. Despite not presenting antimicrobial activity in vitro, they contributed to the production of pro-inflammatory interleukins in the animals tested, provided physical protection, reduced the wound area more markedly until the seventh day of the evaluation, with an acceleration of the healing process and especially when functionalized with hyaluronic acid. These results indicate that the membranes may be promising for accelerating the healing process of chronic wounds in humans.

Construction of Vine-Inspired Antimicrobial Filter with Multiscale 3D Nanonetwork for High-Efficiency Air Filtration.

Enhancing the antimicrobial activity of high-efficiency particulate air (HEPA) filters while maintaining filtration efficiency and pressure drop is currently an urgent issue for preventing the spread of pathogenic microorganisms. Herein, inspired by vines which can enwind fences to fix as well as decorate them, a flexible antimicrobial chitin nanofiber (ChNF@CuOx) was fabricated and loaded onto the rigid glass fiber (GF) skeleton of a HEPA filter. Through the physical interaction, ChNF@CuOx was spontaneously enwound on GF, and ChNF@CuOx itself interweaved to form a new nanonetwork between the GF skeleton. The obtained antimicrobial air filter (ChNF@CuOx/GF) with a unique nanonetwork increased the filtration efficiency of the HEPA filter. Meanwhile, it possessed excellent inactivation ability against Staphylococcus aureus, Escherichia coli, and Candida albicans due to the urchin-like in situ grown CuOx on the ChNF. In particular, the oxygen vacancies generated unexpectedly in CuOx enabled it to produce reactive oxygen species. After eight cycles of antimicrobial assays, the antimicrobial rates of bacteria were higher than 99.5%, and those of fungi were greater than 98.3%. The successful synthesis of antimicrobial fibers and the construction of multidimensional nanoscale structures through a simple postprocessing method provide a new design mentality for antimicrobial functionalization for HEPA filters.

Lysozyme-enhanced cellulose nanofiber, chitosan, and graphene oxide multifunctional nanocomposite for potential burn wound healing applications.

The demand for advanced biomaterials in medical treatments is rapidly expanding. To address this demand, a nanocomposite of cellulose nanofiber (CNF) with chitosan (Ch) and graphene oxide (GO) was developed for burn wound treatment. The CNF-Ch-GO nanocomposites were characterized and their biological properties were evaluated. Microscopic images showed a uniform distribution of CNF, Ch, and GO with a porous structure. ATR-FTIR and XRD analyses confirmed the chemical structures, while a thermogravimetric study confirmed the stability of CNF-Ch-GO nanocomposite under a N2 atmosphere. The synthesized CNF-Ch-GO nanocomposite exhibited rapid absorption, absorbing 1781.7 ± 53.7 % PBS in 2 min. It demonstrated a Young's modulus of 11.90 ± 0.06 MPa in a hydrated condition, indicating its mechanical stability in water. Furthermore, it displayed excellent biocompatibility and hemocompatibility with 96.23 ± 12.21 % cell viability and 0.21 ± 0.08 % of hemolysis. Additionally, the blood clotting index of CNF-Ch-GO was comparable to that of standard dressing gauze. To enhance antimicrobial efficacy, CNF-Ch-GO was conjugated with lysozyme. This biotic and abiotic conjugation resulted in 92.17 % ± 3.02 % and 94.99 ± 2.1 % eradication of Escherichia coli and Staphylococcus aureus, respectively. The enhanced antimicrobial properties, biocompatibility, and mechanical stability of the superabsorbent CNF-Ch-GO nanocomposite indicate its significant potential for advanced burn wound healing applications.

Sulfate salt assistant fabrication of Fe-doped Ni2P modified with SO42-/carbon as highly efficient oxygen evolution reaction electrocatalyst.

The incorporation of oxyanion groups offers a greater potential for enhancing the activity of oxygen evolution reaction (OER) electrocatalysts compared to traditional metal cations doping, owing to their unique configurations and high electronegativity. However, the incorporation of oxyanion groups that differ from those derived from the oxidation of anions in transition metal monoxides poses significant challenges, thereby limiting further applications of oxyanion group modification approach. Herein, we present a novel sulfate salt assistant approach to fabricate Fe-doped Ni2P modified with SO42-/carbon (Fe-Ni2P-S/C) nanofibers as highly efficient OER electrocatalyst. The optimized Fe-Ni2P-S/C nanofibers display superb OER activity, requiring low overpotentials of 266, 323, and 357 mV at 100, 500, and 1000 mA cm-2, respectively. Theoretical calculations reveal that the co-adsorption of PO43- and SO42- on the surface of reconstructed electrocatalyst can reduce the energy barrier of rate-determining step, thereby resulting in enhanced OER activity. The present study emphasizes the crucial role played by anion groups in OER activity as well as proposes a novel approach for incorporating anion groups into electrocatalysts.

Dipyridamole-Grafted Copolymer Electrospun Nanofiber Membranes for Suppression of Peritendinous Adhesions.

Post-traumatic tendon adhesions significantly affect patient prognosis and quality of life, primarily stemming from the absence of effective preventive and curative measures in clinical practice. Current treatment modalities, including surgical excision and non-steroidal anti-inflammatory drugs, frequently exhibit limited efficacy or result in severe side effects. Consequently, the use of anti-adhesive barriers for drug delivery and implantation at the injury site to address peritendinous adhesion (PA) has attracted considerable attention. Electrospun nanofiber membranes (ENMs) have been extensively employed as drug-delivery platforms. In this study, we fabricated a polylactic acid (PLA)-dipyridamole (DP)-graft copolymer ENM called PLC-DP. This membrane exhibits enzyme-sensitive features, allowing more controlled and sustained drug release compared with conventional drug-loaded ENMs. In experiments, PLC-DP implantation reduced tissue adhesion by 47% relative to the control group while not adversely affecting tendon healing. Mechanistically, PLC-DP effectively activates the FXYD domain containing ion-transport regulator 2 (FXYD2) protein, thereby downregulating the fibroblast-transforming growth factor beta (TGF-ß)/Smad3 signaling pathway. PLC-DP leverages the anti-adhesive properties of DP and the enzyme-sensitive characteristics of graft copolymers, providing a promising approach for the future clinical treatment and prevention of PA. STATEMENT OF SIGNIFICANCE: Peritendinous adhesions (PA) are a common and disabling condition that seriously affects the prognosis and quality of life of post-trauma patients. Current treatments often have limited efficacy or severe side effects, leaving a serious gap in clinical practice. We developed a significant biomaterial, poly(lactic acid)-dipyridamole graft copolymer electrospun nanofibrous membrane (PLC-DP), specifically for PA inhibition.In addition, this study uniquely combines dipyridamole, an anti-adhesive agent, and enzyme-sensitive copolymers in electrospun nanofibrous membrane. Unlike conventional drug-loaded electrospun nanofibrous membranes, PLC-DPs have enzyme-sensitive drug properties that allow for sustained drug release on demand. Our experiments showed that implantation of PLC-DP was effective in reducing tissue adhesions by 47% without affecting tendon healing. We elucidated the mechanism behind this phenomenon, suggesting that PCD activates FXYD2 to inhibit TGF-ß-induced expression of Col III, which is a key factor in PA development.

High throughput detection of veterinary drug residues in chicken and eggs.

Co-extraction of multiple types of target substances is the key to achieve high throughput detection. In this work, PDA@MOF-808/PAN NFsM was prepared by co-modified polyacrylonitrile nanofiber membrane (PAN NFsM) with polydopamine (PDA) and metal-organic framework-808 (MOF-808), and its potential as a solid-phase extraction (SPE) adsorbent was investigated by using the most typical nine veterinary drug residues in eggs and chicken as model target substances. The results show that PDA@MOF-808/PAN NFsM could effectively co-extract all the target substances (adsorption efficiency ranged from 81.46 % to 96.78 %), and had good capability of sample matrix purification (matrix effect was lower than -15.26 %), so a new SPE method has been established. Combined with UPLC-MS/MS, the detection limits were 0.3 to 3.1 µg/kg, the recoveries were between 71.02 % and 106.48 %, and the relative standard deviations were lower than 12.03 %, indicating that the method has considerable good sensitivity, accuracy and precision.

Studies on cytocompatibility of human dermal fibroblasts on carbon nanofiber nanoparticle-containing bioprinted constructs.

Functional nanocomposite-based printable inks impart strength, mechanical stability, and bioactivity to the printed matrix due to the presence of nanomaterials or nanostructures. Carbonaceous nanomaterials are known to improve the electrical conductivity, osteoconductivity, mechanical, and thermal properties of printed materials. In the current work, we have incorporated carbon nanofiber nanoparticles (CNF NPs) into methacrylated gelatin (GelMA) to investigate whether the resulting nanocomposite printable ink constructs (GelMA-CNF NPs) promote cell proliferation. Two kinds of printable constructs, cell-laden bioink and biomaterial ink, were prepared by incorporating various concentrations of CNF NPs (50, 100, and 150 µg/mL). The CNF NPs improved the mechanical strength and dielectric properties of the printed constructs. The in vitro cell line studies using normal human dermal fibroblasts (nHDF) demonstrated that CNF NPs are involved in cell-material interaction without affecting cellular morphology. Though the presence of NPs did not affect cellular viability on the initial days of treatment, it caused cytotoxicity to the cells on days 4 and 7 of the treatment. A significant level of cytotoxicity was observed in the highly CNF-concentrated bioink scaffolds (100 and 150 µg/mL). The unfavorable outcomes of the current work necessitate further study of employing functionalized CNF NPs to achieve enhanced cell proliferation in GelMA-CNF NPs-based bioprinted constructs and advance the application of skin tissue regeneration.

Impact of hydrophobically modified cellulose nanofiber on the stability of Pickering emulsion containing insect protein.

BACKGROUND: Cellulose nanofiber (CNF) is an ideal Pickering emulsion stabilizer because of its high aspect ratio and flexibility. CNF was hydrophobically modified by dodecenyl succinic anhydride and used to stabilize the simulated food emulsion system containing insect protein. The prepared dodecenyl succinate nanofiber (D-CNFs) was characterized by contact angle and laser particle size analyzer. The stability of the emulsion system under different conditions was characterized by zeta potential and appearance observation. Lastly, in vitro digestion simulation experiments were carried out to investigate whether the addition of D-CNFs had an effect on the digestion and absorption of oil. RESULTS: The modification process for dodecenyl succinic anhydride to CNFs was that the system temperature was 40 °C, the system pH value was 8.5 and the reaction time was 6 h. The water contact angle of the modified CNFs increased to 83.2 ± 0.9°. D-CNFs were introduced into the simulated food emulsion system containing insect protein. The increase in the concentration of D-CNFs in the aqueous phase promoted the stability of the simulated emulsion system. Increasing the ratio of insect protein was not conducive to the stability of the emulsion. The final fat digestibility of the emulsion with D-CNFs was lower than that of the emulsion without D-CNFs. CONCLUSION: Overall, the analysis and characterization results show the potential of the modified CNF as a food simulant emulsion stabilizer containing insect protein, which can be used for the development of specific functional foods. © 2024 Society of Chemical Industry.

Pickering emulsions stabilized by cellulose nanofibers with tunable surface properties for thermal energy storage.

Cellulose nanofibers (CNFs) have been widely used as a renewable emulsifier to stabilize two immiscible liquids due to their intrinsic amphiphilicity and excellent emulsifying ability. However, it remains challenging to fully understand the effects of carboxylate group content and surface charge density on the emulsifying ability of CNFs and the stability of Pickering emulsion. Herein, carboxymethylated CNFs were extracted from bleached kraft pulp using etherification reaction and high-pressure homogenization, allowing for easy surface charge density and size adjustment by changing sodium chloroacetate content and homogenization cycles. The optimizing CNFs possessed a high Zeta potential (-71.2 mV) and a suitable carboxylate group content (1.81 mmol/g), which enabled CNFs to irreversibly adsorb at the hydrophobic paraffin wax (PW) droplet surface and form interfacial steric barriers, providing large electrostatic repulsion between the PW droplets against coalescence. Thus, the CNF-stabilized PW emulsions could be stored for more than 6 months. Moreover, the phase change enthalpy of the freeze-dried emulsion is as high as 193.7 J/g, which provides the emulsion to reversibly store and release heat. This work provides a comprehensive insight into the interfacial stability mechanism of CNFs as stabilizers and facilitates the potential application in thermal energy storage.

Core-Shell PEDOT-PVDF Nanofiber-Based Ammonia Gas Sensor with Robust Humidity Resistance.

Current ammonia sensors exhibit cross-sensitivity to water vapor, leading to false alarms. We developed a core-shell nanofiber (CSNF) structure to address these issues, using conductive poly(3,4-ethylenedioxythiophene) (PEDOT) as the core and hydrophobic polyvinylidene fluoride-tetrafluoroethylene (PVDF-TrFE) as the shell. The PEDOT-PVDF CSNF, with a diameter of ~500 nm and a 300 nm thick PVDF layer, showed a superior sensitivity and humidity resistance compared to conventional PEDOT membranes for ammonia concentrations of 10-100 ppm. In humid environments, CSNF sensors outperformed membrane sensors, exhibiting a tenfold increase in performance at 51% relative humidity (RH). This study highlights the potential of CSNF sensors for practical ammonia detection, maintaining a high performance under varying humidity levels.

Myelin Sheath-Inspired Hydrogel Electrode for Artificial Skin and Physiological Monitoring.

Significant advancements in hydrogel-based epidermal electrodes have been made in recent years. However, inherent limitations, such as adaptability, adhesion, and conductivity, have presented challenges, thereby limiting the sensitivity, signal-to-noise ratio (SNR), and stability of the physiological-electrode interface. In this study, we propose the concept of myelin sheath-inspired hydrogel epidermal electronics by incorporating numerous interpenetrating core-sheath-structured conductive nanofibers within a physically cross-linked polyelectrolyte network. Poly(3,4-ethylenedioxythiophene)-coated sulfonated cellulose nanofibers (PEDOT:SCNFs) are synthesized through a simple solvent-catalyzed sulfonation process, followed by oxidative self-polymerization and ionic liquid (IL) shielding steps, achieving a low electrochemical impedance of 42 Ω. The physical associations within the composite hydrogel network include complexation, electrostatic forces, hydrogen bonding, π-π stacking, hydrophobic interaction, and weak entanglements. These properties confer the hydrogel with high stretchability (770%), superconformability, self-adhesion (28 kPa on pigskin), and self-healing capabilities. By simulating the saltatory propagation effect of the nodes of Ranvier in the nervous system, the biomimetic hydrogel establishes high-fidelity epidermal electronic interfaces, offering benefits such as low interfacial contact impedance, significantly increased SNR (30 dB), as well as large-scale sensor array integration. The advanced biomimetic hydrogel holds tremendous potential for applications in electronic skin (e-skin), human-machine interfaces (HMIs), and healthcare assessment devices.

Robust and Density Tunable Kevlar/Hexagonal Boron Nitride Microribbon Aerogels with Excellent Thermal, Mechanical, and Oil-Absorption Properties.

With rapid advancements in aerospace and supersonic aircraft technology, there is a growing demand for multifunctional thermal protective materials. Aerogels, known for their low density and high porosity, have garnered significant attention in this regard. However, developing a lightweight multifunctional aerogel that combines exceptional thermal and mechanical properties through a straightforward and time-efficient method remains a significant challenge. Herein, a facile and universal approach is developed for the preparation of Kevlar/hexagonal boron nitride (h-BN) aerogels, in which a spin-assisted method is applied to create robust microribbons and further accelerate solvent displacement. The resulting microribbon scaffold, with its entangled nanofiber-nanosheet morphologies, exhibits sufficient strength to prevent volume shrinkage during drying, thereby allowing precise control over aerogel density. The porous hybrid aerogels, featuring controllable geometric characteristics and tailored densities ranging from 6.9 to 100 mg cm-3, can be successfully fabricated. These aerogels exhibit excellent thermal insulation properties, and the thermal conductivities of the as-prepared KBX aerogels have a wide distribution in the range of 0.0269-0.0450 W m-1 k-1. The thermal stability of the hybrid aerogels is enhanced to 566 °C. Moreover, the resulting hybrid aerogels exhibit an ultrahigh bearing ratio, supporting more than 2000 times their own weight while maintaining stable structural integrity. These aerogels also demonstrate high compressive strength, hydrophobicity, and excellent sorption performance for various oils and solvents. Additionally, the oil-saturated aerogels can be easily recovered through heat treatment or combustion in air. The features endow hybrid Kevlar/h-BN aerogels with significant potential for applications in thermal management, environmental protection, and neutron protection.

Electrospun polyvinyl alcohol nanofiber scaffolds incorporated strontium-substituted hydroxyapatite from sand lobster shells: synthesis, characterization, and in vitro biological properties.

The paper describes the synthesis of hydroxyapatite (HAp) and strontium-substituted hydroxyapatite (SrHAp) from sand lobster shells by a hydrothermal method. The HAp and SrHAp were incorporated into the polyvinyl alcohol (PVA) nanofiber scaffold through the eletrospinning method. The scaffolds were incorporated with 5wt% of hydroxyapatite (HAp), 5wt%, 10wt%, and 15% of SrHAp. The physicochemical, mechanical, and in vitro biological properties of the scaffold were evaluated. The incorporation of HAp or SrHAp was evidenced by the diffraction patterns and the phosphate functional groups related to HAp. The morphological results showed the decrement of fiber diameter in line with the increased SrHAp concentration. A tensile test was conducted to investigate the mechanical properties of the scaffolds, and the results showed that the scaffolds perform poorly at a higher SrHAp concentration because of exceeding agglomeration levels. The PVA/SrHAp15 performed the best antibacterial activity against E. coli and S. aureus with an inhibition zone of (15.2 ± 0.2) and (14.5 ± 0.8), respectively. The apatite formation was more abundant in PVA/SrHAp10 after immersion in a simulated body fluid (SBF). Cell viability results showed that the scaffold enabled the osteoblast cells to grow and proliferate. The biocompatibility of HAp and SrHAp resulted in the enhancement of cell adhesion. Based on all tests, the PVA/SrHAp 10 scaffold shows a strong candidate for further in vivo studies.

Boosting hydrogen evolution performance of nanofiber membrane-based composite photocatalysts with multifunctional carbon dots.

Recent progress in the co-spinning of nanofibers and semiconductor particles offers a promising strategy for the development of photocatalytic devices, solving aggregation and catalyst recovery challenges. However, composite photocatalysts based on nanofiber membranes often suffer from poor conductivity, low hydrophilicity, and easy recombination of photogenerated electron-hole pairs in the semiconductor components. Here, to tackle the aforementioned issues of ZnIn2S4/polyacrylonitrile (ZIS/PAN) nanofiber-based catalysts, we prepared a composite carbon dots/ZnIn2S4/polyacrylonitrile (CZP) nanofiber membrane by blending carbon dots (CDs) with ZIS/PAN using the electrospinning process. The hydrogen evolution performance of the CZP photocatalyst was significantly improved by CDs, which enhanced the hydrophilicity, increased the light absorption, facilitated the transfer of photogenerated electrons, and reduced the recombination of photogenerated electron-hole pairs. Notably, the optimal CZP photocatalyst achieved a hydrogen evolution rate of 2250 µmol g-1h-1, which is about 23 % higher than that of the nanofiber membrane without CDs and 4.55 times higher than that of ZIS particles. The present work successfully improved the CZP nanofiber membrane of photocatalytic hydrogen evolution performance, and the membrane may benefit further device development by eliminating the need for stirring and simplifying the recovery process.

Fabrication and characterization of oleic acid/sesame protein isolate/ poly (vinyl) alcohol core-shell nanofibers: Mitigating lipid oxidation by emulsion electrospinning.

Formulated oil-in-water (O/W) emulsions of oleic acid (OA) using sesame protein isolate (SPI) were processed via emulsion electrospinning with poly (vinyl) alcohol (PVA) to fabricate core-shell nanofibers for lipid oxidation prevention. The emulsion droplet size and viscosity increased as the oil volume fraction rose from 5 % to 30 %. The morphology tests and Fourier transform infrared spectroscopy (FTIR) confirmed the uniformity of nanofibers and OA encapsulation with hydrogen bonding. The thermal stability, mechanical properties, and water contact angle (WCA) of the nanofiber films improved with increased OA content. Encapsulation efficiency was 94.76 % and storage stability was maintained for 7 days in 5 % oil fraction nanofibers. The nanofibers showed lower oxidation and superior oxidative resistance to free OA, with the lowest peroxide value (POV, 2.14 mmol/L) and thiobarbituric acid-reactive substances (TBARS, 36.75 µmol/L). In conclusion, the OA/SPI/PVA (PE) core-shell nanofibers via emulsion electrospinning are efficient for fatty acid encapsulation in functional foods.

Application of self-assembled antibacterial nanofiber loaded oriented artificial skin in infected diabetic-related wound regeneration.

Diabetic patients develop wounds that exhibit delayed healing, prolonged inflammatory responses, and slower epithelialization kinetics compared to non-diabetic patients. Diabetic foot ulcers(DFUs) affect approximately 18.6 million people worldwide. The presence of a high glucose microenvironment in DFUs results in the significant accumulation of bacterial infection and advanced glycation end products (AGEs). To solve this, a self-assemble antibacterial nanofiber(ANF) loaded oriential artificial skin (ANF@OAS) was introduced in this research, which is consisted of L/D-phenylalanine derivatives coupled the natural antimicrobial peptides. The ANF@OAS can effectively reduce AGEs production and suppress multiple resistant bacteria. Additionally, the ANF@OAS can suppress infection and stimulate wound healing in infected diabetic mice.

Experimental investigation of interpersonal particle transport in an aircraft cabin mockup with nanofiber air filters.

Improving aircraft environmental control systems could reduce the risk of airborne infectious disease transmission in aircraft cabins. The high-efficiency particulate air (HEPA) filters used in the existing systems exhibit high pressure drop, which results in high consumption of energy and fuel. Nanofiber air filters fabricated by electrospinning can reduce pressure drop, but their performance in aircraft cabins is unknown. Therefore, this study experimentally investigated the interpersonal particle transport in an aircraft cabin mockup with nanofiber air filters. First, a full-scale, fully occupied, 7-row, single-aisle aircraft cabin mockup was constructed. Nanofiber filtration units were fabricated using the electrospinning technique. Under the well-sealed laboratory testing conditions, both the small-scale nanofiber and HEPA filter media exhibited a particle removal efficiency of around 99 %. The performance of nanofiber and HEPA filtration units installed in the environmental control system of the mockup was then measured. Finally, the interpersonal particle transport in the cabin was measured. The results show that the particle removal efficiency of the nanofiber filtration units installed in the environmental control system ranged from 64 to 72 % when the particle size was 0.3-0.4 µm, which primarily reflected the large air leakages associated with the filter installation. At the filter media level, the pressure drop across the nanofiber units in the mockup was 61-67 % lower than that across the HEPA units under the same airflow rate, which however may not necessarily translate into lower pressure drop for actual filters in aircraft due to the potentially different design in terms of media face area. The average normalized particle concentration in the breathing zones of fellow passengers in the cabin mockup with the nanofiber filtration units was by 0.23, 0.29, and 0.32, respectively, when the index passenger was seated at the window, middle, and aisle.