Immediate functional loading of implant-supported mandibular prostheses with customized UCLA'S attachments with distal extension: A case report.

Implant-supported complete dentures are a common procedure for patients with mandibular edentulism problems. This article documents the protocol for immediate functional loading of fixed transient mandibular prostheses with fully moldable attachments and distal extensions to prevent fractures. A 56-year-old female patient was referred to the Oral Rehabilitation and Implantology Service due to periodontal problems, difficulty in chewing capacity and aesthetic compromise. The patient was treated in a single surgical procedure with dental extractions, guided regularization of the alveolar process and guided placement of five interforaminal implants and placement of functional fixed mandibular prostheses with immediate loading with personalized UCLA'S, distal extensions and short arc occlusal scheme. At 3 months postoperatively, the definitive placement of fixed mandibular metal acrylic prostheses and conventional upper prostheses was performed. The functional and aesthetic integrity of the fixed mandibular prosthesis implant preserved with UCLA'S documents that implant placement in the interforaminal zone with an immediate loading protocol is a viable treatment option for prosthetic rehabilitation of the fully edentulous mandibular arch and that design with distal extensions in the posterior sector of the mandibular arch is an effective option to avoid fracture of the prostheses, presenting a survival of the five mandibular implants of 100% at 1 year postoperatively.

Molecular mechanisms of poor osseointegration in irradiated bone: In vivo study in a rat tibia model.

AIM: Radiotherapy is associated with cell depletion and loss of blood supply, which are linked to compromised bone healing. However, the molecular events underlying these effects at the tissue-implant interface have not been fully elucidated. This study aimed to determine the major molecular mediators associated with compromised osseointegration due to previous exposure to radiation. MATERIALS AND METHODS: Titanium implants were placed in rat tibiae with or without pre-exposure to 20 Gy irradiation. Histomorphometric, biomechanical, quantitative polymerase chain reaction (qPCR) and enzyme-linked immunosorbent assay analyses were performed at 1 and 4 weeks after implantation. RESULTS: The detrimental effects of irradiation were characterized by reduced bone-implant contact and removal torque. Furthermore, pre-exposure to radiation induced different molecular dysfunctions such as (i) increased expression of pro-inflammatory (Tnf) and osteoclastic (Ctsk) genes and decreased expression of the bone formation (Alpl) gene in implant-adherent cells; (ii) increased expression of bone formation (Alpl and Bglap) genes in peri-implant bone; and (iii) increased expression of pro-inflammatory (Tnf) and pro-fibrotic (Tgfb1) genes in peri-implant soft tissue. The serum levels of pro-inflammatory, bone formation and bone resorption proteins were greater in the irradiated rats. CONCLUSIONS: Irradiation causes the dysregulation of multiple biological activities, among which perturbed inflammation seems to play a common role in hindering osseointegration.

Age-related knowledge deficit and attitudes towards oral implants: Survey-based examination of the correlation between patient age and implant therapy awareness.

BACKGROUND: Implantology, as a recognized therapeutic approach, is gaining prominence. The decision-making process and success of implant therapy are closely linked to patient knowledge and expectations. This study aims to explore the association between age and knowledge regarding oral implants. METHODS: Participants were categorized into three age groups (ag): ag 1 (35-44 years), ag 2 (65-74 years), and ag 3 (75 years and older). A total of 400 participants per age group were randomly selected using data from the residents' registration office of Berlin, Germany. Structured telephone interviews were conducted between 2016 and 2017, employing a 67-item questionnaire covering awareness, information level, cost estimation, attitudes, and experiences with oral implants. RESULTS: Despite a low overall knowledge level across all age groups, there was no significant correlation between age and knowledge about oral implants. Awareness increased with age. Information sources varied, with friends, acquaintances, and dentists playing key roles. Participants expressed diverse opinions on implants, with durability and stability identified as crucial characteristics. Significant differences in knowledge were observed between age groups regarding awareness, information sources, and perceptions of dentists offering implants. CONCLUSIONS: The study suggests a need for targeted educational programs, emphasizing age-appropriate information sources to enhance health literacy in oral implantology, particularly among older individuals. Educating physicians on oral implant basics is also crucial. Implementing these measures could empower individuals to make informed decisions about oral implant treatment, thereby contributing to improved oral health outcomes.

The Use of Dynamic Navigation Systems as a Component of Digital Dentistry.

The development of dynamic navigation system (DNS) has facilitated the development of modern digital medicine. In the field of dentistry, the cutting-edge technology is garnering widespread recognition. Based on the principles of 3-dimensional visualization, virtual design, and precise motion tracking, DNS is mainly composed of a computer, a tracking system, specialized tracer instruments, and navigation software. DNS employs a workflow that begins with preoperative data acquisition and imaging data reconstruction, followed by surgical instrument calibration and spatial registration, culminating in real-time guided operations. Currently, the system has been applied in a broad spectrum of dental procedures, encompassing dental implants, oral and maxillofacial surgery (such as tooth extraction, the treatment of maxillofacial fractures, tumors, and foreign bodies, orthognathic surgery, and temporomandibular joint ankylosis surgery), intraosseous anesthesia, and endodontic treatment (including root canal therapy and endodontic surgery). These applications benefit from its enhancements in direct visualization, treatment precision, efficiency, safety, and procedural adaptability. However, the adoption of DNS is not without substantial upfront costs, required comprehensive training, additional preparatory time, and increased radiation exposure. Despite challenges, the ongoing advancements in DNS are poised to broaden its utility and substantially strengthen digital dentistry.

Fracture Resistance of a Two-Piece Zirconia Implant System after Artificial Loading and/or Hydrothermal Aging-An In Vitro Investigation.

The purpose of the present study was to assess the fracture resistance of a two-piece alumina-toughened zirconia implant system with a carbon-reinforced PEEK abutment screw. METHODS: Thirty-two implants with screw-retained zirconia abutments were divided into four groups of eight samples each. Group 0 (control group) was neither loaded nor aged in a chewing simulator; group H was hydrothermally aged; group L was loaded with 98 N; and group HL was subjected to both hydrothermal aging and loading in a chewing simulator. One sample of each group was evaluated for t-m phase transformation, and the others were loaded until fracture. A one-way ANOVA was applied to evaluate differences between the groups. RESULTS: No implant fracture occurred during the artificial chewing simulation. Furthermore, there were no statistically significant differences (p > 0.05) between the groups in terms of fracture resistance (group 0: 783 ± 43 N; group H: 742 ± 43 N; group L: 757 ± 86 N; group HL: 740 ± 43 N) and bending moment (group 0: 433 ± 26 Ncm; group H: 413 ± 23 Ncm; group L: 422 ± 49 Ncm; group HL: 408 ± 27 Ncm). CONCLUSIONS: Within the limitations of the present investigation, it can be concluded that artificial loading and hydrothermal aging do not reduce the fracture resistance of the investigated implant system.

Effect of Mandible Phantom Inclination in the Axial Plane on Image Quality in the Presence of Implant Using Cone-Beam Computer Tomography.

Purpose To assess the effect of 30° phantom inclination on image quality in the presence of an implant using cone-beam computed tomography (CBCT). Materials and methods Three series of eight scans were taken and categorized by a range of 87-90 kVp and 7.1 mA, and 8 mA. For the first CBCT series, the phantom was placed on a flat plane. For the second series, the phantom was inclined at 30° in the axial plane. For the third series, inclined scans were re-oriented and included for statistics. In total, 24 scans were used for statistics. i.e., eight scans at three different planes (flat plane, inclined plane, and re-oriented inclined plane). All the images were analyzed for artifact and contrast-to-noise ratio (CNR) on ImageJ software. Results The inclination of the dry human mandible phantom by 30° reduces the artifact (p <0.05). However, the CNR was not affected by the phantom inclination. Conclusion The appropriate inclination of the head can significantly reduce the metal artifact in the presence of implants and thus improve the CBCT image quality for post-operative follow-up.

Long-Term Stability of Hydrothermally Aged and/or Dynamically Loaded One-Piece Diameter Reduced Zirconia Oral Implants.

The aim of this in vitro study was to evaluate the long-term stability of one-piece diameter reduced zirconia oral implants under the influence of loading and artificial aging in a chewing simulator as well as the fracture load in a static loading test. Thirty-two one-piece zirconia implants with a diameter of 3.6 mm were embedded according to the ISO 14801:2016 standard. The implants were divided into four groups of eight implants. The implants of group DLHT were dynamically loaded (DL) in a chewing simulator for 107 cycles with a load of 98 N and simultaneously hydrothermally aged (HT) using a hot water bath at 85 °C. Group DL was only subjected to dynamic loading and group HT was exclusively subjected to hydrothermal aging. Group 0 acted as a control group: no dynamical loading, no hydrothermal ageing. After exposure to the chewing simulator, the implants were statically loaded to fracture in a universal testing machine. To evaluate group differences in the fracture load and bending moments, a one-way ANOVA with Bonferroni correction for multiple testing was performed. The level of significance was set to p < 0.05. In the static loading test, group DLHT showed a mean fracture load of 511 N, group DL of 569 N, group HT of 588 N and control group 0 of 516 N. The average bending moments had the following values: DLHT: 283.5 Ncm; DL: 313.7 Ncm; HT: 324.4 Ncm; 0: 284.5 Ncm. No significant differences could be found between the groups. Hydrothermal aging and/or dynamic loading had no significant effect on the stability of the one-piece diameter reduced zirconia implants (p > 0.05). Within the limits of this investigation, it can be concluded that dynamic loading, hydrothermal aging and the combination of loading and aging did not negatively influence the fracture load of the implant system. The artificial chewing results and the fracture load values indicate that the investigated implant system seems to be able to resist physiological chewing forces also over a long service period.

One-Piece Zirconia Oral Implants for Single Tooth Replacement: Five-Year Results from a Prospective Cohort Study.

The intention of this 5-year prospective cohort investigation was to clinically and radiographically investigate the outcomes of a one-piece zirconia implant system for single tooth replacement. Sixty-five patients received a total of 66 single-tooth implants. All implants immediately received temporary restorations and were finally restored with all-ceramic crowns. Follow-ups were performed at the prosthetic delivery, after 1, 3, and 5 years. Peri-implant and dental soft-tissue parameters were evaluated and patient-reported outcomes recorded. To monitor peri-implant bone remodelling, standardised radiographs were taken at the implant insertion and at the 1-, 3-, and 5-year follow-ups. In the course of 5 years, 14 implants were lost, resulting in a cumulative implant survival rate of 78.2%. The mean marginal bone loss from the implant insertion to the 5-year follow-up amounted to 1.12 mm. Probing depth, clinical attachment level, bleeding, and plaque index increased over time. In 91.5% of the implants, the papilla index showed levels of 1 or 2, respectively. At the end of the study, the patient satisfaction was higher compared to the pre-treatment measurements. Due to the low survival rate after five years and the noticeably high frequency of advanced bone loss observed in this study, the implant has not met the launch criteria, as it would have not been recommended for routine clinical use.

Risk factors and longitudinal regenerative outcomes of sinus membrane perforation during lateral window sinus floor elevation: A retrospective analysis up to 9 years.

BACKGROUND: Lateral-window sinus floor elevation (LSFE) is a reliable procedure to reconstruct the posterior maxilla for implant therapy. This retrospective study aimed to investigate risk factors associated with Schneiderian membrane perforation (SMP) occurrence during LSFE and longitudinal regenerative outcomes following LSFE up to 9 years. METHODS: Patients who had LSFE between 2010 and 2019 were included. All demographic and surgical-related data were retrieved from existing electronic health records. Radiographs were used to evaluate the vertical dimensional changes of ridge and graft materials and the potential anatomic factors of SMP. RESULTS: A total of 122 LSFE procedures in 99 patients were included in the study. Mean ridge height gain and graft shrinkages were 9.5 ± 3.47 and 1.57 ± 2.85 mm. The influence of the healing period on graft shrinkage showed a positive trend; the longer the healing period, the greater the graft shrinkage (p = 0.09). The pathology in the sinus showed a positive correlation with SMP (p = 0.07). However, other anatomical factors did not negatively impact SMP and subsequent ridge height gain (p > 0.05). CONCLUSIONS: With inherent limitation, the findings with up to 9 years of follow-up indicate a consistent ridge remodeling lasting for about 3 years after LSFE procedures. SMP or membrane thickening may not significantly affect the ridge gain following LSFE. The healing period had the most significant influence on graft shrinkage, showing that the longer the healing time between LSFE and implant placement, the greater the graft shrinkage.

Influence of eight debridement techniques on three different titanium surfaces: A laboratory study.

OBJECTIVES: Debridement methods may damage implant surfaces. This in vitro study investigated eight debridement protocols across three implant surfaces to assess both biofilm removal and surface alterations. MATERIAL AND METHODS: One hundred sixty commercially pure titanium discs were treated to simulate commercially available titanium implant surfaces-smooth, abraded and abraded and etched. Following inoculation with whole human saliva to create a mixed species biofilm, the surfaces were treated with eight debridement methods currently used for clinical peri-implantitis (n = 10). This included air abrasion using powders of glycine, sodium bicarbonate and calcium carbonate; conventional mechanical methods-piezoelectric scaler, carbon and stainless steel scalers; and a chemical protocol using 40% citric acid. Following treatment, remaining biofilm was analysed using scanning electron microscopy and crystal violet assays. For statistical analysis, ANOVA was applied (p < 0.05). RESULTS: All debridement techniques resulted in greater than 80% reduction in biofilm compared with baseline, irrespective of the surface type. Glycine powder delivered through an air polishing system eliminated the most biofilm. Mechanical instruments were the least effective at eliminating biofilm across all surfaces and caused the greatest surface alterations. Citric acid was comparable with mechanical debridement instruments in terms of biofilm removal efficacy. Titanium surfaces were least affected by air abrasion protocols and most affected by mechanical methods. CONCLUSIONS: Mechanical protocols for non-surgical debridement should be approached with caution. Glycine powder in an air polisher and 40% citric acid application both gave minimal alterations across all implant surfaces, with glycine the superior method in terms of biofilm removal.

Influence of loading and aging on the fracture strength of an injection-molded two-piece zirconia implant restored with a zirconia abutment.

OBJECTIVE: To investigate the fracture strength and potential phase transformation of an injection-molded two-piece zirconia implant restored with a zirconia abutment after loading and/or aging. METHODS: Thirty-two two-piece zirconia implants (4.0 mm diameter) restored with zirconia abutments were embedded according to ISO 14801 and divided into four groups (n = 8/group): Three groups were either exclusively hydrothermally treated (group HT; 85°C), dynamically loaded (group DL; 107 cycles; 98 N), or subjected to both treatments simultaneously (group DL/HT). One group remained untreated (group 0). A sample from each group was cross-sectioned and examined by scanning electron microscopy for possible crystal phase transformation. The remaining samples were then loaded to fracture in a static loading test. A one-way ANOVA was used for statistical analyses. RESULTS: During dynamic loading, three implants of group DL and six implants of group DL/HT fractured at a load of 98 N. The fracture strength of group DL/HT (108 ± 141 Ncm) was significantly reduced compared to the other groups (group 0: 342 ± 36 Ncm; HT: 363 ± 49 Ncm; DL: 264 ± 198 Ncm) (p < .05). Fractures from group 0 and HT occurred at both implant and abutment level, whereas implants from group DL and DL/HT fractured only at implant level. A shallow monoclinic transformation zone of approximately 2 µm was observed following hydrothermal treatment. CONCLUSIONS: Within the limitations of this study, it can be concluded that dynamic loading and the combination of loading and aging reduced the fracture strength of the implant abutment combination. Hydrothermal treatment caused a shallow transformation zone which had no influence on the fracture strength.

microRNA-491-5p regulates osteogenic differentiation of bone marrow stem cells in type 2 diabetes.

OBJECTIVES: Osseointegration of oral implants has a low success rate in patients with type 2 diabetes. This is because of the inhibition of osteogenic differentiation in the jawbone marrow mesenchymal stem cells, in which the expression of microRNA(miR)-491-5p is significantly downregulated, as ascertained through gene chip screening. However, the underlying mechanisms are unclear. Here, we aimed to clarify the mechanisms involved in the influence of miR-491-5p on osteogenic differentiation. SUBJECTS AND METHODS: Jawbone marrow mesenchymal stem cells were isolated from jawbones of patients with type 2 diabetes and subjected to bioinformatics and functional analyses. Osteogenesis experiments were conducted using the isolated cells and an in vivo model. RESULTS: Knockdown and overexpression experiments revealed the positive effects of miR-491-5p expression on osteogenic differentiation in vivo and in vitro. Additionally, a dual-luciferase assay revealed that miR-491-5p targeted the SMAD/RUNX2 pathway by inhibiting the expression of epidermal growth factor receptor. CONCLUSIONS: miR-491-5p is vital in osteogenic differentiation of jawbone mesenchymal stem cells; its downregulation in type 2 diabetes could be a major cause of decreased osteogenic differentiation. Regulation of miR-491-5p expression could improve osteogenic differentiation of jawbone mesenchymal stem cells in patients with type 2 diabetes.

Oral health-related quality of life following peri-implantitis surgery: A prospective study.

AIM: The aim of this prospective study was to describe long-term patient-reported outcomes following surgical treatment of peri-implantitis. METHODS: Oral health-related quality of life (OHRQoL) of 43 patients diagnosed with peri-implantitis was recorded using the short form of the Oral Health Impact Profile (OHIP-14), where low scores indicate low impact. A Norwegian version of the OHIP-14 form was filled out 1 week before and 6-, 18- and 36 months after the peri-implant surgery. The mean and median OHIP-14 scores were calculated for its seven domains (i.e., Functional limitation, Physical pain, Psychological discomfort, Physical disability, Psychological disability, Social disability, and Handicap) across four different time points. The dataset was analyzed to find correlations between independent variables and the OHIP-scores. RESULTS: The OHIP-14 scores were at a low level from baseline to 36 months post-surgery. The mean scores at specific time points were at baseline 7.2 (SD 7.3), 6 months post-surgery 6.0 (SD 6.9), 18 months post-surgery 6.8 (SD 9.7), and 3 years post-surgery 7.0 (SD 9.4). None of these changes were statistically significant. Specific domains of OHRQoL did not significantly differ across different time points (pre- and post-surgery) in males (except for domain "Handicap") or females (except for domain "Functional limitation"). CONCLUSIONS: The reported OHIP-14 measures were initially low and stayed low up to 3 years after peri-implant surgery. This may indicate that neither the disease nor the treatment deteriorated or improved the OHRQoL.

Complications of sinus floor elevation procedure and management strategies: A systematic review.

AIM: This systematic review aimed to investigates the types and incidences of complications following sinus floor elevations (SFE) along with their prevention and management strategies. MATERIALS AND METHODS: Electronic database and hand search were conducted to screen the literature published from January 1960 to June 2021. The selected studies had to report well-described SFE techniques, complications during, and post-SFE. Data extraction included types of SFE techniques, complications, and their treatment strategies. RESULTS: A total of 74 studies with 4411 SFE procedures met the inclusion criteria. Different SFE techniques demonstrated varying patterns for both complications and complication rates. Postoperative pain, swelling, and edema were widely reported. The most common complications that required intervention following Lateral SFE (LSFE) were sinus membrane perforation (SMP), wound dehiscence, graft exposure and failure, and sinusitis. LSFE had more SMPs and sinusitis cases compared with a transcrestal SFE (TSFE). The presence of benign paroxysmal positional vertigo following TSFE was significant in certain selected studies. CONCLUSION: Given the inherent limitations, this systematic review showed distinct features of complications in SFE using varying techniques. Treatment planning for these procedures should incorporate strategies to avoid complication occurrence.

Metals Biotribology and Oral Microbiota Biocorrosion Mechanisms.

During the last decades, metal-based biomaterials have been extensively explored to be used as biocompatible metals for biomedical applications, owing to their superior mechanical properties and corrosion resistance. Consequently, for long-term implanted medical devices, to assure the biomaterials' reliability, functionality, and biocompatibility, studying the various bio-tribological damage mechanisms to obtain the optimum properties is one of the most important goals. In this review, we consider the most important metal-based biomaterials such as stainless steel, alloys of titanium (Ti), cobalt-chromium (Co-Cr), and Nichel-Titatium (Ni-Ti), as well Magnesium (Mg) alloys and with Tantalum (Ta), emphasizing their characteristics, clinical applications, and deterioration over time. The influence of metal elements on biological safety, including significant effects of metal-based biomaterials in dentistry were discussed, considering the perspectives of surface, mechanical properties, corrosion behaviors, including interactions, bio-mechanisms with tissues, and oral environments. In addition, the role of the oral microbiota was explored due to its role in this erosion condition, in order to further understand the mechanism of metal-based biomaterials implanted on the microflora balance of aerobic and anaerobic bacteria in an oral environment.

Professional Mechanical Tooth Cleaning Method for Dental Implant Surface by Agar Particle Blasting.

Oral dysfunction due to peri-implantitis and shortened life of implants has become a major concern. Self-care and removal of oral biofilms by professional mechanical tooth cleaning (PMTC) are indispensable for its prevention. However, if the surface roughness of the implant is increased, it may result in the adhesion of biofilm in the oral cavity. Therefore, the PMTC method can serve for long-term implant management. Calcium carbonate (CaCO3) has been used as a cleaning method for implant surfaces; however, there is concern that the implant surface roughness could increase due to particle collision. Therefore, in this study, to establish a blasting cleaning method that does not adversely affect the implant surface, a new blasting cleaning method using agar particles was devised and its practical application examined. When the simulated stains were blasted with white alumina (WA) abrasive grains and CaCO3 particles, the simulated stains were almost removed, the surface roughness changed to a satin-finished surface-which was thought to be due to fine scratches-and the surface roughness increased. Most of the simulated stains were removed on the surface of the sample blasted with glycine particles and agar particles. Conversely, the gloss of the sample surface was maintained after cleaning, and the increase in surface roughness was slight.

On marginal bone level changes around dental implants.

BACKGROUND: Peri-implant bone level values have been used as the clinical standard of reference to describe the status of a dental implant, despite the fact that their significance for the long-term survival of the implant has never been properly assessed. PURPOSE: To challenge the assumption that the natural course of peri-implant bone loss is the loss of the implant. MATERIALS AND METHODS: This article is a narrative review on reasons and interpretations of marginal bone level changes around dental implants. RESULTS AND CONCLUSIONS: Different views regarding the pattern and progression of marginal bone loss depending on dental specialties have been identified. However, the present finding of a negative correlation between an increasing cumulative marginal bone loss and a decreasing risk of implant failures over time indicates that peri-implant marginal bone loss does not necessarily represent a condition of disease. Reduction of marginal bone levels may be observed in a majority of patients during follow-up time, with only a minority of those patients losing implants and implant-supported prostheses in the long term. Bone level changes seem often to occur as a consequence of physiological processes and/or as an adaptation to altered external as well as host response factors. Periodical radiological assessments of implant-restorations remain a valid diagnostic tool for the detection of potential implant fractures, loss of osseointegration, screws working loose and for the detection of the few cases with advanced, continuously progressing marginal bone loss during time. The detection of peri-implant marginal bone loss at one time point should not be immediately considered as a sign of ongoing pathology and of an increased risk of future loss of the implant in question.

Are marginal bone level changes around dental implants due to infection?

BACKGROUND: Peri-implant bone level values have been used as the clinical standard of reference to describe the status of a dental implant. Reduction of marginal bone levels in association with bleeding on probing have been claimed to be a sign of pathology and an indication of treatment needs. PURPOSE: To assess the available evidence that peri-implant bone loss is caused by infection. MATERIALS AND METHODS: This article is a narrative review on the interpretation of marginal bone level changes around dental implants as a consequence of infection. RESULTS AND CONCLUSIONS: There is evidence that plaque accumulation induces an inflammatory reaction in the peri-implant soft tissues and that resumption of plaque control measures results in the reduction of the inflammation. Since plaque is always present in the oral cavity, a cause-effect relationship between plaque accumulation and peri-implantitis, defined as inflammation of the peri-implant soft tissues associated with marginal bone loss has been difficult to validate and has not been proven so far. There is no evidence of the mechanisms involved in the tissue reactions resulting in the conversion from a state of an inevitable inflammation contained in the soft tissues to a state of inflammation involving the loss of peri-implant marginal bone. There is today no consensus whether implants should be expected to be surrounded by tissues which are completely free from inflammation, or that an "immune-driven", chronic, subclinical inflammation should be expected at the foreign body implant. The infectious origin theory appears to be mainly supported by ligature-induced experimental peri-implantitis investigations in animal models that suffer of several methodological problems, and therefore, provide misleading information with regards to human clinical applications in large, routine populations.

Fusion of intra-oral scans in cone-beam computed tomography scans.

PURPOSE: The purpose of this study was to evaluate the clinical accuracy of the fusion of intra-oral scans in cone-beam computed tomography (CBCT) scans using two commercially available software packages. MATERIALS AND METHODS: Ten dry human skulls were subjected to structured light scanning, CBCT scanning, and intra-oral scanning. Two commercially available software packages were used to perform fusion of the intra-oral scans in the CBCT scan to create an accurate virtual head model: IPS CaseDesigner® and OrthoAnalyzer™. The structured light scanner was used as a gold standard and was superimposed on the virtual head models, created by IPS CaseDesigner® and OrthoAnalyzer™, using an Iterative Closest Point algorithm. Differences between the positions of the intra-oral scans obtained with the software packages were recorded and expressed in six degrees of freedom as well as the inter- and intra-observer intra-class correlation coefficient. RESULTS: The tested software packages, IPS CaseDesigner® and OrthoAnalyzer™, showed a high level of accuracy compared to the gold standard. The accuracy was calculated for all six degrees of freedom. It was noticeable that the accuracy in the cranial/caudal direction was the lowest for IPS CaseDesigner® and OrthoAnalyzer™ in both the maxilla and mandible. The inter- and intra-observer intra-class correlation coefficient showed a high level of agreement between the observers. CLINICAL RELEVANCE: IPS CaseDesigner® and OrthoAnalyzer™ are reliable software packages providing an accurate fusion of the intra-oral scan in the CBCT. Both software packages can be used as an accurate fusion tool of the intra-oral scan in the CBCT which provides an accurate basis for 3D virtual planning.

A systematic review and meta-analysis on influencing factors of failure of oral implant restoration treatment.

BACKGROUND: With the continuous improvement of human living standards, more and more dental patients are requiring oral implant restoration treatment. However, there is still controversy regarding the influence of risk factors such as osteoporosis, radiotherapy, diabetes, and smoking on the failure of oral implants. This study aimed to explore the correlation between risk factors and failure of oral implant restoration treatment. METHODS: The databases of China National Knowledge Infrastructure (CNKI), Baidu Academic, Weipu, Wanfang, PubMed, EBSCO, Medline, Web of knowledge, Ovid, and the Cochrane Library were searched. The search strategies included: subject terms related to research results such as survival, osseointegration, failure, removal, replacement, and loss; related to risk factors: osteoporosis, head and neck cancer, diabetes, and smoking; and oral implantology as a keyword. RESULTS: Thirty-two articles were included in meta-analysis, there was a high heterogeneity between radiotherapy and dental implant failure (I2=71.6%, P=0.000), and there was an obvious correlation between radiotherapy and dental implant failure [relative risk (RR) =2.09, 95% confidential interval (CI): 1.68-2.61]. There was heterogeneity between diabetes and oral implant failure in the included articles (I2=59.6%, P=0.084). There was no remarkable correlation between osteoporosis and dental implant failure (RR =1.19, 95% CI: 0.81-1.74). There was a high heterogeneity between smoking and dental implant failure in the included articles (I2=33.8%, P=0.092), showing obvious correlation (RR =1.80, 95% CI: 1.53-2.11). DISCUSSION: The results of meta-analysis confirmed that radiotherapy and smoking were greatly associated with oral implant failure.