Machine Learning-Inspired Molecular Design, Divergent Syntheses, and X-ray Analyses of Dithienobenzothiazole-Based Semiconductors Controlled by S•••N and S•••S Interactions.

Inspired by the previous machine-learning study that the number of hydrogen-bonding acceptor (NHBA) is important index for the hole mobility of organic semiconductors, seven dithienobenzothiazole (DBT) derivatives 1a-g (NHBA = 5) were designed and synthesized by one-step functionalization from a common precursor. X-ray single-crystal structural analyses confirmed that the molecular arrangements of 1b (the diethyl and ethylthienyl derivative) and 1c (the di(n-propyl) and n-propylthienyl derivative) in the crystal are classified into brickwork structures with multidirectional intermolecular charge-transfer integrals, as a result of incorporation of multiple hydrogen-bond acceptors. The solution-processed top-gate bottom-contact devices of 1b and 1c had hole mobilities of 0.16 and 0.029 cm2 V-1s-1, respectively.

Hexabenzoheptacene: A Longitudinally Multihelicene Nanocarbon with Local Aromaticity and Enhanced Stability.

We report the synthesis of a longitudinally helical molecular nanocarbon, hexabenzoheptacene (HBH), along with its dimethylated derivative (HBH-Me), which are composed of six benzene rings periodically benzannulated to both zigzag edges of a heptacene core. This benzannulation pattern endows the resulting nanocarbons with a helical heptacene core and local aromaticity, imparting enhanced solubility and stability to the system. The chiral HBH-Me adopts a more highly twisted conformation with an end-to-end twist angle of 95°, enabling the separation of the enantiomers. Both HBH and HBH-Me can be facilely oxidized into their corresponding dications, which exhibit enhanced planarity and aromaticity upon loss of electrons. Notably, both longitudinally helical nanocarbons readily promote solid state packing into two-dimensional (2D) arrangement. Single-crystal microbelts of HBH-Me show hole mobility up to 0.62 cm2 V-1 s-1, illustrating the promising potential of these longitudinally helical molecules for organic electronic devices.

Solution-Processed Ultralow Voltage Organic Transistors With Sharp Switching for Adaptive Visual Perception.

Neuromorphic visual systems can emulate biological retinal systems to perceive visual information under different levels of illumination, making them have considerable potential for future intelligent vehicles and vision automation. However, the complex circuits and high operating voltages of conventional artificial vision systems present great challenges for device integration and power consumption. Here, bioinspired synaptic transistors based on organic single crystal phototransistors are reported, which exhibit excitation and inhibition synaptic plasticity with time-varying. By manipulating the charge dynamics of the trapping centers of organic crystal-electret vertical stacks, organic transistors can operate below 1 V with record high on/off ratios close to 108 and sharp switching with a subthreshold swing of 59.8 mV dec-1. Moreover, the approach offers visual adaptation with highly localized modulation and over 98.2% recognition accuracy under different illumination levels. These bioinspired visual adaptation transistors offer great potential for simplifying the circuitry of artificial vision systems and will contribute to the development of machine vision applications.

Stepwise Aggregation Control of PEDOT:PSS Enabled High-Conductivity, High-Resolution Printing of Polymer Electrodes for Transparent Organic Phototransistors.

Electrohydrodynamic (EHD) jet printing is a widely employed technology to create high-resolution patterns and thus has enormous potential for circuit production. However, achieving both high conductivity and high resolution in printed polymer electrodes is a challenging task. Here, by modulating the aggregation state of the conducting polymer in the solution and solid phases, a stable and continuous jetting of PEDOT:PSS is realized, and high-conductivity electrode arrays are prepared. The line width reaches less than 5 µm with a record-high conductivity of 1250 S/cm. Organic field-effect transistors (OFETs) are further developed by combining printed source/drain electrodes with ultrathin organic semiconductor crystals. These OFETs show great light sensitivity, with a specific detectivity (D*) value of 2.86 × 1014 Jones. In addition, a proof-of-concept fully transparent phototransistor is demonstrated, which opens up new pathways to multidimensional optical imaging.

An Organic Optoelectronic Synapse with Multilevel Memory Enabled by Gate Modulation.

Artificial synaptic devices are emerging as contenders for next-generation computing systems due to their combined advantages of self-adaptive learning mechanisms, high parallel computation capabilities, adjustable memory level, and energy efficiency. Optoelectronic devices are particularly notable for their responsiveness to both voltage inputs and light exposure, making them attractive for dynamic modulation. However, engineering devices with reconfigurable synaptic plasticity and multilevel memory within a singular configuration present a fundamental challenge. Here, we have established an organic transistor-based synaptic device that exhibits both volatile and nonvolatile memory characteristics, modulated through gate voltage together with light stimuli. Our device demonstrates a range of synaptic behaviors, including both short/long-term plasticity (STP and LTP) as well as STP-LTP transitions. Further, as an encoding unit, it delivers exceptional read current levels, achieving a program/erase current ratio exceeding 105, with excellent repeatability. Additionally, a prototype 4 × 4 matrix demonstrates potential in practical neuromorphic systems, showing capabilities in the perception, processing, and memory retention of image inputs.

Enhanced N-type Semiconducting Performance of Asymmetric Monochlorinated Isoindigo-based Semiregioregular Polymers under Dynamic Forces.

The asymmetric monochlorination strategy not only effectively addresses the steric issues in conventional dichlorination but also enables the development of promising acceptor units and semiregioregular polymers. Herein, monochlorinated isoindigo (1CIID) is successfully designed and synthesized by selectively introducing single chlorine (Cl) atoms. Furthermore, the 1CIID copolymerizes with two donor counterparts, centrosymmetric 2,2'-bithiophene (2T) and axisymmetric 4,7-di(thiophen-2-yl)benzo[1,2,5]thiadiazole (DTBT), forming two polymers, P1CIID-2T and P1CIID-DTBT. These polymers exhibit notable differences in backbone linearity and dipole moments, influenced by the symmetry of their donor counterparts. In particular, P1CIID-2T, which contains a centrosymmetric 2T unit, demonstrates a linear backbone and a significant dipole moment of 10.20 D. These properties contribute to the favorable film morphology of P1CIID-2T, characterized by highly ordered crystallinity in the presence of fifth-order (500) X-ray diffraction peaks. Notably, P1CIID-2T exhibits a significant improvement in molecular alignment under dynamic force, resulting in over 8-fold improvement in the performance of organic field-effect transistor (OFET) devices, with superior electron mobility up to 1.22 cm2 V-1 s-1. This study represents the first synthesis of asymmetric monochlorinated isoindigo-based conjugated polymers, highlighting the potential of asymmetric monochlorination for developing n-type semiconducting polymers. Moreover, our findings provide valuable insights into the relationship between the molecular structure and properties.

The Influence of a Microstructural Conformation of Oriented Floating Films of Semiconducting Polymers on Organic Device Performance.

Extended π-conjugation with backbone-planarity-driven π-π stacking dominates charge transport in semiconducting polymers (SCPs). The roles of SCP film morphology and macromolecular conformation concerning the substrate in influencing charge transport and its impact on device performance have been a subject of extensive debate. Face-on SCPs promote out-of-plane charge transport primarily through π-π stacking, with conjugated polymeric chains assisting transport in connecting crystalline domains, whereas edge-on SCPs promote in-plane charge transport primarily through conjugation and π-π stacking. In this work, we fabricated three different types of devices, namely, organic field effect transistors, organic Schottky diodes, and organic bistable memristors, as representatives of planar and vertical devices. We demonstrate that a planar device, i.e., an organic field effect transistor, performs well in an edge-on conformation exhibiting a field-effect mobility of 0.12 cm2V-1s-1 and on/off ratio >104, whereas vertical devices, i.e., organic Schottky diodes and organic memristors, perform well in a face-on conformation, exhibiting exceptionally high on/off ratios of ~107 and 106, respectively.

A Domino Protocol toward High-performance Unsymmetrical Dibenzo[d,d']thieno[2,3-b;4,5-b']dithiophenes Semiconductors.

Unsymmetric organic semiconductors have many advantages such as good solubility, rich intermolecular interactions for potential various optoelectronic applications. However, their synthesis is more challenging due to intricate structures thus normally suffering tedious synthesis. Herein, we report a trisulfur radical anion (S3⋅-) triggered domino thienannulation strategy for the synthesis of dibenzo[d,d']thieno[2,3-b;4,5-b']dithiophenes (DBTDTs) using readily available 1-halo-2-ethynylbenzenes as starting materials. This domino protocol features no metal catalyst and the formation of six C-S and one C-C bonds in a one-pot reaction. Mechanistic study revealed a unique domino radical anion pathway. Single crystal structure analysis of unsymmetric DBTDT shows that its unique unsymmetric structure endows rich and multiple weak S⋅⋅⋅S interactions between molecules, which enables the large intermolecular transfer integrals of 86 meV and efficient charge transport performance with a carrier mobility of 1.52 cm2 V-1 s-1. This study provides a facile and highly efficient synthetic strategy for more high-performance unsymmetric organic semiconductors.

A Novel N-Type Molecular Dopant With a Closed-Shell Electronic Structure Applicable to the Vacuum-Deposition Process.

Rational design, synthesis, and characterization of a new efficient versatile n-type dopant with a closed-shell electronic structure are described. By employing the tetraphenyl-dipyranylidene (DP0) framework with two 7π-electron systems modified with N,N-dimethylamino groups as the strong electron-donating substituent, 2,2',6,6'-tetrakis[4-(dimethylamino)phenyl]-4,4'-dipyranylidene (DP7), a closed-shell molecule with an extremely high-lying energy level of the highest occupied molecular orbital, close to 4.0 eV below the vacuum level, is successfully developed. Thanks to its thermal stability, DP7 is applicable to vacuum deposition, which allows utilization of DP7 in bulk doping for the development of n-type organic thermoelectric materials and contact doping for reducing contact resistance in n-type organic field-effect transistors. As vacuum-deposition processable n-type dopants are very limited, DP7 stands out as a useful n-type dopant, particularly for the latter purpose.

Selective Detection of Functionalized Carbon Particles based on Polymer Semiconducting and Conducting Devices as Potential Particulate Matter Sensors.

This paper reports a new mechanism for particulate matter detection and identification. Three types of carbon particles are synthesized with different functional groups to mimic the real particulates in atmospheric aerosol. After exposing polymer-based organic devices in organic field effect transistor (OFET) architectures to the particle mist, the sensitivity and selectivity of the detection of different types of particles are shown by the current changes extracted from the transfer curves. The results indicate that the sensitivity of the devices is related to the structure and functional groups of the organic semiconducting layers, as well as the morphology. The predominant response is simulated by a model that yielded values of charge carrier density increase and charge carriers delivered per unit mass of particles. The research points out that polymer semiconductor devices have the ability to selectively detect particles with multiple functional groups, which reveals a future direction for selective detection of particulate matter.

Dissecting the Interplay between Organic Charge-Modulated Field-Effect Transistors and Field-Effect Transistors through Interface Control Engineering.

Organic charge-modulated field-effect transistors (OCMFETs) have garnered significant interest as sensing platforms for diverse applications that include biomaterials and chemical sensors owing to their distinct operational principles. This study aims to improve the understanding of driving mechanisms in OCMFETs and optimize their device performance by investigating the correlation between organic field-effect transistors (OFETs) and OCMFETs. By introducing self-assembled monolayers (SAMs) with different functional groups on the AlOx gate dielectric surface, we explored the impact of the surface characteristics on the electrical behavior of both devices. Our results indicate that the dipole moment of the dielectric surface is a critical control variable in the performance correlation between OFET and OCMFET devices, as it directly impacts the generation of the induced floating gate voltage through the control gate voltage. The insights obtained from this study contribute to the understanding of the factors affecting OCMFET performance and emphasize their potential as platforms for diverse sensing systems.

Unraveling the Effect of Stereoisomerism on Mobility-Stretchability Properties of n-Type Semiconducting Polymers with Biobased Epimers as Conjugation Break Spacers.

The development of intrinsically stretchable n-type semiconducting polymers has garnered much interest in recent years. In this study, three biobased dianhydrohexitol epimers of isosorbide (ISB), isomannide (IMN), and isoidide (IID), derived from cellulose, were incorporated into the backbone of a naphthalenediimide (NDI)-based n-type semiconducting polymer as conjugation break spacers (CBSs). Accordingly, three polymers were synthesized through the Migita-Kosugi-Stille coupling polymerization with NDI, bithiophene, and CBSs, and the mobility-stretchability properties of these polymers were investigated and compared with those of their analogues with conventional alkyl-based CBSs. Experimental results showed that the different configurations of these epimers in CBSs sufficiently modulate the melt entropies, surface aggregation, crystallographic parameters, chain entanglements, and mobility-stretchability properties. Comparable ductility and edge-on preferred stacking were observed in polymers with endo- or exo-configurations in IMN- and IID-based polymers. By contrast, ISB with endo-/exo-configurations exhibits an excellent chain-realigning capability, a reduced crack density, and a proceeding bimodal orientation under tensile strain. Therefore, the ISB-based polymer exhibits high orthogonal electron mobility retention of (53 and 56)% at 100% strain. This study is one of the few examples where biobased moieties are incorporated into semiconducting polymers as stress-relaxation units. Additionally, this is the first study to report on the effect of stereoisomerism of epimers on the morphology and mobility-stretchability properties of semiconducting polymers.

Design, synthesis, and application in OFET of a small molecule based on π-expanded fused diketopyrrolopyrrole.

Diketopyrrolopyrrole (DPP) and its derivatives, as electron deficient units, are widely used as building blocks in organic field-effect transistors, obtaining high performance. However, further modification of the DPP structure is crucial for the development of organic semiconductors. In this work, an FDPP is synthesized and characterized. The results show that FDPP exhibited not only a good planar core structure with a good conjugation system, but also strong aggregation in the solid state. As a consequence, FDPP presents p-type behavior with a hole mobility of ∼9.7 × 10-3 cm2 V-1 s-1. This study suggests that FDPP is a promising electron deficient unit for high performance semiconductors.

Facile Blending Strategy for Boosting the Conjugated Polymer Semiconductor Transistor's Mobility.

The optimization of field-effect mobility in polymer field-effect transistors (FETs) is a critical parameter for advancing organic electronics. Today, many challenges still persist in understanding the roles of the design and processing of semiconducting polymers toward electronic performance. To address this, a facile approach to solution processing using blends of PDPP-TVT and PTPA-3CN is developed, resulting in a 3.5-fold increase in hole mobility and retained stability in electrical performance over 3 cm2 V-1 s-1 after 20 weeks. The amorphous D-A conjugated structure and strong intramolecular polarity of PTPA-3CN are identified as major contributors to the observed improvements in mobility. Additionally, the composite analysis by X-ray photoelectron spectroscopy (XPS) and the flash differential scanning calorimetry (DSC) technique showed a uniform distribution and was well mixed in binary polymer systems. This mobility enhancement technique has also been successfully applied to other polymer semiconductor systems, offering a new design strategy for blending-type organic transistor systems. This blending methodology holds great promise for the practical applications of OFETs.

Chalcogenopheno[3,2-b]pyrrole-Containing Donor-Acceptor-Donor Organic Semiconducting Small Molecules for Organic Field-Effect Transistors.

A group of chalcogenopheno[3,2-b]pyrroles, including thieno[3,2-b]pyrrole (TP), furo[3,2-b]pyrrole (FP), and selenopheno[3,2-b]pyrrole (SeP), and thieno[3,2-b]thiophene (TT) electron-donating units were coupled with a thiophene-flanked diketopyrrolo[3,4-c]pyrrole (ThDPP) acceptor to generate four donor-acceptor-donor (D-A-D) semiconducting small molecules (ThDPP-TT, ThDPP-FP, ThDPP-TP, and ThDPP-SeP). This study systematically investigated the differences between chalcogenopheno[3,2-b]pyrroles and TT. From the characterizations, chalcogenopheno[3,2-b]pyrrole-containing molecules showed lower band gaps and binding-energy cold crystallization behavior. The enthalpies of cold crystallization were correlated with the weight of the chalcogen in ThDPP-FP, ThDPP-TP, and ThDPP-SeP, which were evaluated as intermolecular chalcogen-bond interactions between chalcogen and pyrrole nitrogen in chalcogenopheno[3,2-b]pyrroles. A stronger chalcogen bond interaction resulted in stronger self-aggregation in thin films with thermal treatment, which resulted in a polycrystalline structure in chalcogenopheno[3,2-b]pyrrole-containing molecules. For the application in an organic field-effect transistor, all four molecules showed good performance with the highest hole mobilities as 6.33 × 10-3 cm2 V-1 s-1 for ThDPP-TT, 2.08 × 10-2 cm2 V-1 s-1 for ThDPP-FP, 1.87 × 10-2 cm2 V-1 s-1 for ThDPP-TP, and 6.32 × 10-3 cm2 V-1 s-1 for ThDPP-SeP, and the change of mobility is well correlated to the root-mean-square roughness of the thin films. Overall, all the chalcogenopheno[3,2-b]pyrrole-containing molecules showed lower band gaps, polymorphism, and better charge transport properties compared to TT-containing molecules, which motivates replacing TT with chalcogenopheno[3,2-b]pyrroles in conjugated polymers, non-fullerene small molecular acceptors, and narrow-band-gap donors.

Optimization of Gas-Sensing Properties in Poly(triarylamine) Field-Effect Transistors by Device and Interface Engineering.

In this study, we investigated the gas-sensing mechanism in bottom-gate organic field-effect transistors (OFETs) using poly(triarylamine) (PTAA). A comparison of different device architectures revealed that the top-contact structure exhibited superior gas-sensing performance in terms of field-effect mobility and sensitivity. The thickness of the active layer played a critical role in enhancing these parameters in the top-contact structure. Moreover, the distance and pathway for charge carriers to reach the active channel were found to significantly influence the gas response. Additionally, the surface treatment of the SiO2 dielectric with hydrophobic self-assembled mono-layers led to further improvement in the performance of the OFETs and gas sensors by effectively passivating the silanol groups. Under optimal conditions, our PTAA-based gas sensors achieved an exceptionally high response (>200%/ppm) towards NO2. These findings highlight the importance of device and interface engineering for optimizing gas-sensing properties in amorphous polymer semiconductors, offering valuable insights for the design of advanced gas sensors.

Solution-Processable Indenofluorenes on Polymer Brush Interlayer: Remarkable N-Channel Field-Effect Transistor Characteristics under Ambient Conditions.

The development of solution-processable n-type molecular semiconductors that exhibit high electron mobility (µe ≥ 0.5 cm2/(V·s)) under ambient conditions, along with high current modulation (Ion/Ioff ≥ 106-107) and near-zero turn on voltage (Von) characteristics, has lagged behind that of other semiconductors in organic field-effect transistors (OFETs). Here, we report the design, synthesis, physicochemical and optoelectronic characterizations, and OFET performances of a library of solution-processable, low-LUMO (-4.20 eV) 2,2'-(2,8-bis(3-alkylthiophen-2-yl)indeno[1,2-b]fluorene-6,12-diylidene)dimalononitrile small molecules, ß,ß'-Cn-TIFDMTs, having varied alkyl chain lengths (n = 8, 12, 16). An intriguing correlation is identified between the solid-isotropic liquid transition enthalpies and the solubilities, indicating that cohesive energetics, which are tuned by alkyl chains, play a pivotal role in determining solubility. The semiconductors were spin-coated under ambient conditions on densely packed (grafting densities of 0.19-0.45 chains/nm2) ultrathin (∼3.6-6.6 nm) polystyrene-brush surfaces. It is demonstrated that, on this polymer interlayer, thermally induced dispersive interactions occurring over a large number of methylene units between flexible alkyl chains (i.e., zipper effect) are critical to achieve a favorable thin-film crystallization with a proper microstructure and morphology for efficient charge transport. While C8 and C16 chains show a minimal zipper effect upon thermal annealing, C12 chains undergo an extended interdigitation involving ∼6 methylene units. This results in the formation of large crystallites having lamellar stacking ((100) coherence length ∼30 nm) in the out-of-plane direction and highly favorable in-plane π-interactions in a slipped-stacked arrangement. Uninterrupted microstructural integrity (i.e., no face-on (010)-oriented crystallites) was found to be critical to achieving high mobilities. The excellent crystallinity of the C12-substituted semiconductor thin film was also evident in the observed crystal lattice vibrations (phonons) at 58 cm-1 in low-frequency Raman scattering. Two-dimensional micrometer-sized (∼1-3 µm), sharp-edged plate-like grains lying parallel with the substrate plane were observed. OFETs fabricated by the current small molecules showed excellent n-channel behavior in ambient with µe values reaching ∼0.9 cm2/(V·s), Ion/Ioff ∼ 107-108, and Von ≈ 0 V. Our study not only demonstrates one of the highest performing n-channel OFET devices reported under ambient conditions via solution processing but also elucidates significant relationships among chemical structures, molecular properties, self-assembly from solution into a thin film, and semiconducting thin-film properties. The design rationales presented herein may open up new avenues for the development of high-electron-mobility novel electron-deficient indenofluorene and short-axis substituted donor-acceptor π-architectures via alkyl chain engineering and interface engineering.

Strain-Balanced Organic Semiconductor Film for Improving the Stability of Organic Field-Effect Transistors.

Strain-induced aggregate state instability in organic semiconductor (OSC) films is a critical and bottleneck issue in the practicalization process of organic field-effect transistors (OFETs), but this issue lacks deep insight and effective solutions for a long time. Herein, we developed a novel and general strain balance strategy for stabilizing the aggregate state of OSC films and enhancing the robustness of OFETs. The charge transport zone in OSC films located at the OSC/dielectric interface always suffers from the intrinsic tensile strain induced by substrates and tends to dewet. By introducing a compressive strain layer, the tensile strain can be well balanced and OSC films attain a highly stable aggregate state. Consequently, the OFETs based on strain-balanced OSC heterojunction films exhibit excellent operational and storage stability. This work provides an effective and general strategy to stabilize OSC films and gives guidance in constructing highly stable organic heterojunction devices.

Polymer-Gated Transistors with Only One Solution-Processed, Single Crystalline Organic Microwire for Light and Oxygen Detection.

Organic semiconductors employed in single crystalline form have several advantages over polycrystalline films, such as higher charge carrier mobility and better environmental stability. Herein, we report the fabrication and characterization of a solution-processed microsized single-crystalline organic wire of n-type N,N'-dipentyl-3,4,9,10-perylene tetracarboxylic diimide (PTCDI-C5). The crystal was applied as an active layer in polymer-gated organic field-effect transistors (OFETs) and organic complementary inverter circuits. The single crystaiiline nature of PTCDI-C5 wires were characterized using two-dimensional grazing incidence wide-angle X-ray diffraction (2D-GIXD) and polarized optical microscopy. OFETs with the PTCDI-C5 crystals exhibited high n-type performance and air stability under ambient conditions. To investigate the electrical properties of the single-crystalline PTCDI-C5 wire more precisely, OFETs with only one PTCDI-C5 microwire in the channel were fabricated, and clear n-type characteristics with satisfactory saturation behavior were observed. The device with only one crystal wire exhibited characteristics with significantly lower variation compared to the multicrystal devices, which shows that the density of crystal wires is a critical factor in precisely investigating device performance. The devices exhibited a reversible threshold voltage shift under vacuum and oxygen conditions, without changing the charge carrier mobility. Light-sensitive characteristics were also observed. Additionally, this solution-processed, highly crystalline organic semiconductor can be used in high-performance organic electronic circuits as well as in gas or light sensors.

Applications of Transistor-Based Biochemical Sensors.

Transistor-based biochemical sensors feature easy integration with electronic circuits and non-invasive real-time detection. They have been widely used in intelligent wearable devices, electronic skins, and biological analyses and have shown broad application prospects in intelligent medical detection. Field-effect transistor (FET) sensors have high sensitivity, reasonable specificity, rapid response, and portability and provide unique signal amplification during biochemical detection. Organic field-effect transistor (OFET) sensors are lightweight, flexible, foldable, and biocompatible with wearable devices. Organic electrochemical transistor (OECT) sensors convert biological signals in body fluids into electrical signals for artificial intelligence analysis. In addition to biochemical markers in body fluids, electrophysiology indicators such as electrocardiogram (ECG) signals and body temperature can also cause changes in the current or voltage of transistor-based biochemical sensors. When modified with sensitive substances, sensors can detect specific analytes, improve sensitivity, broaden the detection range, and reduce the limit of detection (LoD). In this review, we introduce three kinds of transistor-based biochemical sensors: FET, OFET, and OECT. We also discuss the fabrication processes for transistor sources, drains, and gates. Furthermore, we demonstrated three sensor types for body fluid biomarkers, electrophysiology signals, and development trends. Transistor-based biochemical sensors exhibit excellent potential in multi-mode intelligent analysis and are good candidates for the next generation of intelligent point-of-care testing (iPOCT).