Crystal structure of lipase from Pseudomonas aeruginosa reveals an unusual catalytic triad conformation.

The Pseudomonas aeruginosa lipase PaL catalyzes the stereoselective hydrolysis of menthyl propionate to produce L-menthol. The lack of a three-dimensional structure of PaL has so far prevented a detailed understanding of its stereoselective reaction mechanism. Here, the crystal structure of PaL was determined at a resolution of 1.80 Å by single-wavelength anomalous diffraction. In the apo-PaL structure, the catalytic His302 is located in a long loop on the surface that is solvent exposed. His302 is distant from the other two catalytic residues, Asp274 and Ser164. This configuration of catalytic residues is unusual for lipases. Using metadynamics simulations, we observed that the enzyme undergoes a significant conformational change upon ligand binding. We also explored the catalytic and stereoselectivity mechanisms of PaL by all-atom molecular dynamics simulations. These findings could guide the engineering of PaL with an improved diastereoselectivity for L-menthol production.

Lowering pH optimum of activity of SshEstI, a slightly alkaliphilic archaeal esterase of the hormone-sensitive lipase family.

SshEstI, a carboxylesterase from the thermoacidophilic archaeon Saccharolobus shibatae, is a member of the hormone-sensitive lipase family that displays slightly alkaliphilic activity with an optimum activity at pH 8.0. In this study, three distinct strategies were explored to confer acidophilic properties to SshEstI. The first strategy involved engineering the oxyanion hole by replacing Gly81 with serine or aspartic acid. The G81S mutant showed optimum activity at pH 7.0, whereas the aspartic acid mutant (G81D) rendered the enzyme slightly acidophilic with optimum activity observed at pH 6.0; however, kcat and kcat/Km values were reduced by these substitutions. The second strategy involved examining the effects of surfactant additives on the pH-activity profiles of SshEstI. The results showed that cetyltrimethylammonium bromide (CTAB) enhanced wild-type enzyme (WT) activity at acidic pH values. In the presence of 0.1 mM CTAB, G81S and G81D were acidophilic enzymes with optimum activity at pH 6.0 and 4.0, respectively, although their enzyme activities were low. The third strategy involved engineering the active site to resemble that of kumamolisin-As (kuma-As), an acidophilic peptidase of the sedolisin family. The catalytic triad of kuma-As was exchanged into SshEstI using site-directed mutagenesis. X-ray crystallographic analysis of the mutants (H274D and H274E) revealed that the potential hydrogen donor-acceptor distances around the active site of WT were fully maintained in these mutants. However, these mutants were inactive at pH 4-8.

The active site of the SGNH hydrolase-like fold proteins: Nucleophile-oxyanion (Nuc-Oxy) and Acid-Base zones.

SGNH hydrolase-like fold proteins are serine proteases with the default Asp-His-Ser catalytic triad. Here, we show that these proteins share two unique conserved structural organizations around the active site: (1) the Nuc-Oxy Zone around the catalytic nucleophile and the oxyanion hole, and (2) the Acid-Base Zone around the catalytic acid and base. The Nuc-Oxy Zone consists of 14 amino acids cross-linked with eight conserved intra- and inter-block hydrogen bonds. The Acid-Base Zone is constructed from a single fragment of the polypeptide chain, which incorporates both the catalytic acid and base, and whose N- and C-terminal residues are linked together by a conserved hydrogen bond. The Nuc-Oxy and Acid-Base Zones are connected by an SHLink, a two-bond conserved interaction from amino acids, adjacent to the catalytic nucleophile and base.

Trialkylphosphonium Oxoborate as C(sp3 )-H Oxyanion Hole Catalyst for Diels-Alder Reaction.

We have developed a catalytic protocol for Diels-Alder reaction using trialkylphosphonium oxoborates as oxyanion hole catalysts. The reaction can be operated under ambient conditions. Dienes could easily polymerize under acidic condition. Nonetheless, these acid-sensitive substrates are compatible with the catalytic protocol and the reaction scope covers a wide range of substrates.

Thiolase: A Versatile Biocatalyst Employing Coenzyme A-Thioester Chemistry for Making and Breaking C-C Bonds.

Thiolases are CoA-dependent enzymes that catalyze the thiolytic cleavage of 3-ketoacyl-CoA, as well as its reverse reaction, which is the thioester-dependent Claisen condensation reaction. Thiolases are dimers or tetramers (dimers of dimers). All thiolases have two reactive cysteines: (a) a nucleophilic cysteine, which forms a covalent intermediate, and (b) an acid/base cysteine. The best characterized thiolase is the Zoogloea ramigera thiolase, which is a bacterial biosynthetic thiolase belonging to the CT-thiolase subfamily. The thiolase active site is also characterized by two oxyanion holes, two active site waters, and four catalytic loops with characteristic amino acid sequence fingerprints. Three thiolase subfamilies can be identified, each characterized by a unique sequence fingerprint for one of their catalytic loops, which causes unique active site properties. Recent insights concerning the thiolase reaction mechanism, as obtained from recent structural studies, as well as from classical and recent enzymological studies, are addressed, and open questions are discussed.

Investigation on substrate specificity and catalytic activity of serine protease neuropsin.

Neuropsin is one of serine proteases mainly found at the hippocampus and the amygdala, where it contributes to the long-term potentiation and memory acquisition by rebuilding of synaptic connections. Despite of the importance of neuropsin, the substrate specificity and regulation mechanisms of neuropsin have been unclear. Thus, we investigated the substrate specificity and the catalytic activity of neuropsin by the protein-ligand docking and molecular dynamics (MD) simulations and succeeded to reproduce the trend of the experimental results. Our study revealed that the substrate specificity and the activity of neuropsin depended on multiple factors: the substrate charge, the substrate orientation, the hydrogen bond network within the catalytic triad and the substrate, and the formation of the oxyanion hole. The apo neuropsin was not reactive without proper alignment of catalytic triad. The substrate binding induced the reactive alignment of catalytic triad. Then the substrate-neuropsin interaction forms the oxyanion hole that stabilizes the transition state and reduces the free-energy barrier of the following scission reaction.

Transesterification of Non-Activated Esters Promoted by Small Molecules Mimicking the Active Site of Hydrolases.

The synthesis of small molecules able to mimic the active site of hydrolytic enzymes has been largely pursued in recent decades. The high reaction rates and specificity shown by natural hydrolases present an attractive target, and yet the preparation of suitable small-molecule mimics remains challenging, requiring activated substrates to achieve productive outcomes. Here we present small synthetic artificial enzymes which mimic the catalytic site and the oxyanion hole of chymotrypsin and N-terminal hydrolases and are able to perform, for the first time, the transesterification of a non-activated ester such as ethyl acetate with methanol under mild and neutral reaction conditions.

An Adjustable Cleft Based on an 8-Sulfonamide-2-Naphthoic Acid with Oxyanion Hole Geometry.

Cleft type receptors showing the oxyanion hole motif have been prepared in a straightforward synthesis starting from the commercial 3,7-dihidroxy-2-naphthoic acid. The double H-bond donor pattern is achieved by the introduction of a sulfonamide group in the C-8 position of naphthalene and a carboxamide at the C-2 position. This cleft, for which the geometry resembles that of an oxyanion hole, is able to adjust to different guests, as shown by the analysis of the X-ray crystal structures of associates with methanol or acetic acid. Combination of hydrogen bonds and charge-transfer interactions led to further stabilization of the complexes, in which the electron-rich aromatic ring of the receptor was close in space to the electron-deficient dinitroaromatic guests. Modelling studies and bidimensional NMR experiments have been carried out to provide additional information.

Effect of mutation at oxyanion hole residu (H110F) on activity of Lk4 lipase.

Mutant of lipase at oxyanion hole (H110 F) was constructed. The gene was highly expressed in Eschericia coli BL21 (DE3) and the recombinant protein was purified using Ni-NTA affinity chromatography. The activity of mutant enzyme was significantly increased compared to that the wild type. Further comparison showed that both of the enzymes exhibited same optimum pH and temperature, and showed highest lipolytic activity on pNP-decanoate (C10). The wild type appeared lost of activity on C14 and C16 substrates meanwhile the mutant still showed activity up to 20 %. In the presence of non polar organic solvent such as n-hexane, the wild type became inactive enzyme meanwhile the mutant still remained 50 % of its activity. The results suggested that mutation at oxyanion hole (H110 F) caused enzyme-substrate interaction change resulting on elevation of activity, better activity toward longer carbon chain substrate and improving the activity in the present of non polar organic solvent.

Structural insights of catalytic mechanism in mutant pyrazinamidase of Mycobacterium tuberculosis.

Pyrazinamidase (PZase) is a member of Fe-dependent amidohydrolases that activates pyrazinamide (PZA) into active pyrazinoic acid (POA). PZA, a nicotinamide analogue, is an essential first-line drug used in Mycobacterium tuberculosis (Mtb) treatment. The active form of PZA, POA, is toxic and potently inhibits the growth of latent Mtb, which makes it possible to shorten the conventional 9-month tuberculosis treatment to 6 months. In this study, an extensive molecular dynamics simulation was carried out to the study the resistance mechanism offered by the three mutations Q10P and D12A and G97D. Our results showed that two regions Gln10-His43, Phe50-Gly75 are profoundly affected by these mutations. Among the three mutations, Q10P and D12A mutations strongly disturb the communication among the catalytic triad (Asp8, Lys98 and Cys138). The oxyanion hole is formed between the backbone nitrogen atoms of A134 and C138 which stabilizes the hydroxyl anion of nicotinamide. The D12A mutation greatly disturbs the oxyanion hole formation followed by the Q10P and G97D. Our results also showed that these mutations destabilize the interaction between Fe2+ ion and Asp49, His51, His57 and His71. The binding pocket analysis showed that these mutations increase the cavity volume, which results in loose binding of PZA. MMGBSA analyzes have shown that these mutations reduce the binding affinity to the PZA drug. Our results may provide useful information for the design of new and effective PZase inhibitors based on structural information of WT and mutant PZases.Communicated by Ramaswamy H. Sarma.

Mutations in penicillin-binding protein 2 from cephalosporin-resistant Neisseria gonorrhoeae hinder ceftriaxone acylation by restricting protein dynamics.

The global incidence of the sexually transmitted disease gonorrhea is expected to rise due to the spread of Neisseria gonorrhoeae strains with decreased susceptibility to extended-spectrum cephalosporins (ESCs). ESC resistance is conferred by mosaic variants of penicillin-binding protein 2 (PBP2) that have diminished capacity to form acylated adducts with cephalosporins. To elucidate the molecular mechanisms of ESC resistance, we conducted a biochemical and high-resolution structural analysis of PBP2 variants derived from the decreased-susceptibility N. gonorrhoeae strain 35/02 and ESC-resistant strain H041. Our data reveal that mutations both lower affinity of PBP2 for ceftriaxone and restrict conformational changes that normally accompany acylation. Specifically, we observe that a G545S substitution hinders rotation of the ß3 strand necessary to form the oxyanion hole for acylation and also traps ceftriaxone in a noncanonical configuration. In addition, F504L and N512Y substitutions appear to prevent bending of the ß3-ß4 loop that is required to contact the R1 group of ceftriaxone in the active site. Other mutations also appear to act by reducing flexibility in the protein. Overall, our findings reveal that restriction of protein dynamics in PBP2 underpins the ESC resistance of N. gonorrhoeae.

Cholinesterase as a Target for Drug Development in Alzheimer's Disease.

Alzheimer's disease (AD) is an enormous healthcare challenge, and 50 million people are currently suffering from it. There are several pathophysiological mechanisms involved, but cholinesterase inhibitors remained the major target from the last 2-3 decades. Among four available therapeutics (donepezil, rivastigmine, galantamine, and memantine), three of them are cholinesterase inhibitors. Herein, we describe the role of acetylcholine sterase (AChE) and related hypothesis in AD along with the pharmacological and chemical aspects of the available cholinesterase inhibitors. This chapter discusses the development of several congeners and hybrids of available cholinesterase inhibitors along with their binding patterns in enzyme active sites.

MD simulations reveal alternate conformations of the oxyanion hole in the Zika virus NS2B/NS3 protease.

Recent crystallography studies have shown that the binding site oxyanion hole plays an important role in inhibitor binding, but can exist in two conformations (active/inactive). We have undertaken molecular dynamics (MD) calculations to better understand oxyanion hole dynamics and thermodynamics. We find that the Zika virus (ZIKV) NS2B/NS3 protease maintains a stable closed conformation over multiple 100-ns conventional MD simulations in both the presence and absence of inhibitors. The S1, S2, and S3 pockets are stable as well. However, in two of eight simulations, the A132-G133 peptide bond in the binding pocket of S1' spontaneously flips to form a 310 -helix that corresponds to the inactive conformation of the oxyanion hole, and then maintains this conformation until the end of the 100-ns conventional MD simulations without inversion of the flip. This conformational change affects the S1' pocket in ZIKV NS2B/NS3 protease active site, which is important for small molecule binding. The simulation results provide evidence at the atomic level that the inactive conformation of the oxyanion hole is more favored energetically when no specific interactions are formed between substrate/inhibitor and oxyanion hole residues. Interestingly, however, transition between the active and inactive conformation of the oxyanion hole can be observed by boosting the valley potential in accelerated MD simulations. This supports a proposed induced-fit mechanism of ZIKV NS2B/NS3 protease from computational methods and provides useful direction to enhance inhibitor binding predictions in structure-based drug design.

An n→π* Interaction in the Bound Substrate of Aspartic Proteases Replicates the Oxyanion Hole.

Aspartic proteases regulate many biological processes and are prominent targets for therapeutic intervention. Structural studies have captured intermediates along the reaction pathway, including the Michaelis complex and tetrahedral intermediate. Using a Ramachandran analysis of these structures, we discovered that residues occupying the P1 and P1' positions (which flank the scissile peptide bond) adopt the dihedral angle of an inverse γ-turn and polyproline type-II helix, respectively. Computational analyses reveal that the polyproline type-II helix engenders an n→π* interaction in which the oxygen of the scissile peptide bond is the donor. This interaction stabilizes the negative charge that develops in the tetrahedral intermediate, much like the oxyanion hole of serine proteases. The inverse γ-turn serves to twist the scissile peptide bond, vacating the carbonyl π* orbital and facilitating its hydration. These previously unappreciated interactions entail a form of substrate-assisted catalysis and offer opportunities for drug design.

Colonization and degradation of polyhydroxyalkanoates by lipase-producing bacteria.

Biodegradation of short-chain-length polyhydroxyalkanoates (scl-PHAs) and medium-chain-length polyhydroxyalkanoates (mcl-PHAs) was studied using 2 bacteria, Pseudomonas chlororaphis and Acinetobacter lwoffii, which secrete an enzyme, or enzymes, with lipase activity. These bacteria produced clear zones of depolymerization on Petri plates containing colloidal solutions of PHA polymers with different monomer compositions. Lipase activity in these bacteria was measured using p-nitrophenyl octanoate as a substrate. In liquid medium, scl-PHA (e.g., PHBV) and mcl-PHA (e.g., PHO) films were used as the sole carbon source for growth, and after 7 days, 5%-18% loss in mass of PHA films was observed. Scanning electron microscopy of these films revealed bacterial colonization of the polymers, with cracks and pitting in the film surfaces. Degradation of polymers released 3-hydroxyhexanoate, 3-hydroxyoctanoate, and 3-hydroxydecanoate monomers into the liquid medium, depending on the starting polymer. Genes encoding secretory lipases, with amino acid consensus sequences for lipase boxes and oxyanion holes, were identified in the genomes of P. chlororaphis and A. lwoffii. Although amino acid consensus sequences for lipase boxes and oxyanion holes are also present in PHA depolymerases identified in the genomes of other PHA-degrading bacteria, the P. chlororaphis and A. lwoffii lipases had low homology with these depolymerases.

Lipases: An Overview.

Lipases are ubiquitous enzymes, widespread in nature. They were first isolated from bacteria in the early nineteenth century, and the associated research continuously increased due to the characteristics of these enzymes. This chapter reviews the main sources, structural properties, and industrial applications of these highly studied enzymes.

Rational evolution of the unusual Y-type oxyanion hole of Rhodococcus sp. CR53 lipase LipR.

Rhodococcus sp CR-53 lipase LipR was the first characterized member of bacterial lipase family X. Interestingly, LipR displays some similarity with α/ß-hydrolases of the C. antartica lipase A (CAL-A)-like superfamily (abH38), bearing a Y-type oxyanion hole, never found before among bacterial lipases. In order to explore this unusual Y-type oxyanion hole, and to improve LipR performance, two modification strategies based on site directed or saturation mutagenesis were addressed. Initially, a small library of mutants was designed to convert LipR Y-type oxyanion hole (YDS) into one closer to those most frequently found in bacteria (GGG(X)). However, activity was completely lost in all mutants obtained, indicating that the Y-type oxyanion hole of LipR is required for activity. A second approach was addressed to modify the two main oxyanion hole residues Tyr110 and Asp111, previously described for CAL-A as the most relevant amino acids involved in stabilization of the enzyme-substrate complex. A saturation mutagenesis library was prepared for each residue (Tyr110 and Asp111), and activity of the resulting variants was assayed on different chain length substrates. No functional LipR variants could be obtained when Tyr110 was replaced by any other amino acids, indicating that this is a crucial residue for catalysis. However, among the Asp111 variants obtained, LipR D111G produced a functional enzyme. Interestingly, this LipR-YGS variant showed less activity than wild type LipR on short- or mid- chain substrates but displayed a 5.6-fold increased activity on long chain length substrates. Analysis of the 3D model and in silico docking studies of this enzyme variant suggest that substitution of Asp by Gly produces a wider entrance tunnel that would allow for a better and tight accommodation of larger substrates, thus justifying the experimental results obtained.

An investigation into the applicability of the semiempirical method PM7 for modeling the catalytic mechanism in the enzyme chymotrypsin.

The catalytic cycle for the serine protease α-chymotrypsin was investigated in an attempt to determine the suitability of using the semiempirical method PM7 in the program MOPAC for investigating enzyme-catalyzed reactions. All six classical intermediates were modeled using standard methods, and were characterized as stable minima on the potential energy surface. Using a modified saddle point optimization method, five transition states were located and verified both by vibrational and by intrinsic reaction coordinate analysis. Some individual features, such as the hydrogen bonds in the oxyanion hole, the nature of various electrostatic interactions, and the role of Met192, were examined. This involved designing and running computational experiments to model mutations that would allow features of interest, in particular the energies involved, to be isolated. Three features within the enzyme were examined in detail: the reaction site itself, where covalent bonds were made and broken, the electrostatic effects of the buried aspartate anion, a passive but essential component of the catalytic triad, and the oxyanion hole, where hydrogen bonds help stabilize charged intermediates. With one minor exception, all phenomena investigated agreed with previously-reported descriptions. This result, along with the fact that all the techniques used were relatively straightforward, leads to the recommendation that PM7 and related methods, such as PM6-D3H4, are appropriate for modeling similar enzyme-catalyzed reactions. Graphical abstract Fifth of six transition states, showing water splitting into hydroxyl anion and a proton, to form the second tetrahedral intermediate and histidinium ion. Atoms of the water molecule involved in the hydrolysis are indicated by halos.

Functional Dissection of the Bipartite Active Site of the Class I Coenzyme A (CoA)-Transferase Succinyl-CoA:Acetate CoA-Transferase.

Coenzyme A (CoA)-transferases catalyze the reversible transfer of CoA from acyl-CoA thioesters to free carboxylates. Class I CoA-transferases produce acylglutamyl anhydride intermediates that undergo attack by CoA thiolate on either the internal or external carbonyl carbon atoms, forming distinct tetrahedral intermediates <3 Å apart. In this study, crystal structures of succinyl-CoA:acetate CoA-transferase (AarC) from Acetobacter aceti are used to examine how the Asn347 carboxamide stabilizes the internal oxyanion intermediate. A structure of the active mutant AarC-N347A bound to CoA revealed both solvent replacement of the missing contact and displacement of the adjacent Glu294, indicating that Asn347 both polarizes and orients the essential glutamate. AarC was crystallized with the nonhydrolyzable acetyl-CoA (AcCoA) analog dethiaacetyl-CoA (1a) in an attempt to trap a closed enzyme complex containing a stable analog of the external oxyanion intermediate. One active site contained an acetylglutamyl anhydride adduct and truncated 1a, an unexpected result hinting at an unprecedented cleavage of the ketone moiety in 1a. Solution studies confirmed that 1a decomposition is accompanied by production of near-stoichiometric acetate, in a process that seems to depend on microbial contamination but not AarC. A crystal structure of AarC bound to the postulated 1a truncation product (2a) showed complete closure of one active site per dimer but no acetylglutamyl anhydride, even with acetate added. These findings suggest that an activated acetyl donor forms during 1a decomposition; a working hypothesis involving ketone oxidation is offered. The ability of 2a to induce full active site closure furthermore suggests that it subverts a system used to impede inappropriate active site closure on unacylated CoA.

Crystal structure of an acetyl esterase complexed with acetate ion provides insights into the catalytic mechanism.

We previously reported the crystal structure of an acetyl esterase (TcAE206) belonging to carbohydrate esterase family 3 from Talaromyces cellulolyticus. In this study, we solved the crystal structure of an S10A mutant of TcAE206 complexed with an acetate ion. The acetate ion was stabilized by three hydrogen bonds in the oxyanion hole instead of a water molecule as in the structure of wild-type TcAE206. Furthermore, the catalytic triad residue His182 moved 0.8 Å toward the acetate ion upon substrate entering the active site, suggesting that this movement is necessary for completion of the catalytic reaction.