Recent Advances in Barium Cobaltite-Based Perovskite Oxides as Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells.

Solid oxide fuel cells (SOFCs) are considered as advanced energy conversion technologies due to the high efficiency, fuel flexibility, and all-solid structure. Nevertheless, their widespread applications are strongly hindered by the high operational temperatures, limited material selection choices, inferior long-term stability, and relatively high costs. Therefore, reducing operational temperatures of SOFCs to intermediate-temperature (IT, 500-800 °C) range can remarkably promote the practical applications by enabling the use of low-cost materials and enhancing the cell stability. Nevertheless, the conventional cathodes for high-temperature SOFCs display inferior electrocatalytic activity for oxygen reduction reaction (ORR) at reduced temperatures. Barium cobaltite (BaCoO3-δ)-based perovskite oxides are regarded as promising cathodes for IT-SOFCs because of the high free lattice volume and large oxygen vacancy content. However, BaCoO3-δ-based perovskite oxides suffer from poor structural stability, inferior thermal compatibility, and insufficient ionic conductivity. Herein, an in-time review about the recent advances in BaCoO3-δ-based cathodes for IT-SOFCs is presented by emphasizing the material design strategies including functional/selectively doping, deficiency control, and (nano)composite construction to enhance the ORR activity/durability and thermal compatibility. Finally, the currently existed challenges and future research trends are presented. This review will provide valuable insights for the development of BaCoO3-δ-based electrocatalysts for various energy conversion/storage technologies.

Ultra-High-k Ferroelectric BaTiO3 Perovskite in the Gate Stack for Two-Dimensional WSe2 p-Type High-Performance Transistors.

The experimental demonstration of a p-type 2D WSe2 transistor with a ferroelectric perovskite BaTiO3 gate oxide is presented. The 30 nm thick BaTiO3 gate stack shows a robust ferroelectric hysteresis with a remanent polarization of 20 µC/cm2 and further enables a capacitance equivalent thickness of 0.5 nm in the hybrid WSe2/BaTiO3 stack due to its high dielectric constant of 323. We demonstrate one of the best ON currents for perovskite gate 2D transistors in the literature. This is enabled by high-quality epitaxial growth of BaTiO3 and a single 2D layer transfer based fabrication method that is shown to be amenable to silicon platforms. This demonstration is an important milestone toward the integration of crystalline complex oxides with 2D channel materials for scaled CMOS and low-voltage ferroelectric logic applications.

An efficient electrode for reversible oxygen reduction/evolution and ethylene electro-production on protonic ceramic electrochemical cells.

Protonic ceramic electrochemical cells (PCECs) have demonstrated great promise for applications in the generation of electricity, and the synthesis of chemicals (for example, ethylene). However, enhancing the electrochemical reactions kinetics and stability of PCECs electrodes is one grand challenge. Here, we present a novel electrode material via a co-doping of cesium (Cs) and niobium (Nb) on PrBaCo2O6-δ with the composition of PrBa0.9Cs0.1Co1.9Nb0.1O6-δ (PBCCN), which naturally decomposes into dual phases of a double-perovskite PBCCN (DP-PBCCN, ∼92.3 wt%) and a single-perovskite Ba0.9Cs0.1Co0.95Nb0.05O3-δ (SP-BCCN, ∼7.7 wt%) under typical powder processing conditions. PBCCN exhibits a low area-specific resistance (ASR) value of 0.107 Ω cm2, an outstanding performance of 2.04 W cm-2 in fuel cell (FC) mode, a current density of -2.84 A cm-2 at 1.3 V in electrolysis cell (EC) mode, and promising reversible operational durability of 53 cycles in ∼212 h at +/- 0.5 A cm-2 and 650 °C. Cs doping generates more oxygen vacancies and accelerates the oxygen exchange kinetics, while Nb doping effectively enhances the stability, as illustrated by the analyses of X-ray photoelectron spectroscopy, and electrical conductivity relaxations. When applied as the positrode for electrochemical non-oxidative dehydrogenation of ethane (C2H6) to ethylene (C2H4) on PCECs, it displays an encouraging C2H6 conversion of 12.75% and a C2H4 selectivity of 98.4% at 1.2 V.

Plasma-Induced Oxygen Defect Engineering in Perovskite Oxide for Boosting Oxygen Evolution Reaction.

Perovskite oxides are considered highly promising candidates for oxygen evolution reaction (OER) catalysts due to their low cost and adaptable electronic structure. However, modulating the electronic structure of catalysts without altering their nanomorphology is crucial for understanding the structure-property relationship. In this study, a simple plasma bombardment strategy is developed to optimize the catalytic activity of perovskite oxides. Experimental characterization of plasma-treated LaCo0.9Fe0.1O3 (P-LCFO) reveals abundant oxygen vacancies, which expose numerous active sites. Additionally, X-ray photoelectron spectroscopy and X-ray absorption fine structure analyses indicate a low Co valence state in P-LCFO, likely due to the presence of these oxygen vacancies, which contributes to an optimized electronic structure that enhances OER performance. Consequently, P-LCFO exhibits significantly improved OER catalytic activity, with a low overpotential of 294 mV at a current density of 10 mA cm-2, outperforming commercial RuO2. This work underscores the benefits of plasma engineering for studying structure-property relationships and developing highly active perovskite oxide catalysts for water splitting.

Decorated and reconstructed perovskite-oxide electrodes for oxygen electrocatalysis and Zn-air batteries.

Although decorated nanoparticles offer a great potential to generate extra active sites, their preparation usually requires time- and energy-consuming approaches. We report the remarkable activity and durability augmentation for the oxygen evolution reaction (OER) via effective and facile on-site electrochemical manipulation, using LaNiO3 as a model catalyst. When compared to the pristine LaNiO3, the electrochemically manipulated LaNiO3 cycled in Fe3+-containing 0.1 M KOH (i.e., E-LNO+Fe) exhibits an almost three-fold improvement in current density at 1.65 V. It is experimentally and theoretically shown that the electrochemical manipulation leads to the creation of defective LaNiO3-δ and NiO on the surfaces, which accelerate phase transformation to (oxy)hydroxides and hence the OER. Furthermore, a Zn-air battery assembled with E-LNO+Fe has demonstrated superior activity by presenting 171 mW cm-2. Thus, our work demonstrates that substantial performance increases may be achieved by decorating and reconstructing perovskite-oxide electrodes via on-site electrochemical modification.

Tuning the Transparency Window of SrVO3 Transparent Conducting Oxide.

Correlated transparent conducting oxides (TCOs) have gained great attention, because of their unique combination of transparency and metallic character. SrVO3 (SVO) was identified as a high-performance TCO in the visible range. Few studies have investigated band structure engineering through chemical doping to enhance the optical properties of SVO. Here, we use two different strategies by exploiting the band-filling and width of the bands derived from Vanadium to tune the screened plasma frequency ωp* and the interband transition Ep-d energy, corresponding to the optical transparency window edges. For control of the band-filling strategy, it is found that Titanium doped SVO has a wide transparency window, but such a composition does not maintain the high electrical conductivity required for TCO applications. Concerning the bandwidth strategy, the doping of SrVO3 by Calcium shows that ωp* remains located in the IR range (1.12 eV), while Ep-d is blue-shifted into the UV region (3.43 eV) due to reinforced electronic correlations. By an appropriate choice of dopant, we successfully increased the size of the transparency window by around 11% from 1.94 eV (SVO) to 2.30 eV (Calcium-doped SVO), while retaining high conductivity of around 2.30 × 104 (S·cm-1) and high charge carrier density of 2.93 × 1022 cm-3.

Deep Reconstruction of Ruthenate Perovskite Oxide Enables Efficient pH-Universal Hydrogen Evolution Reaction.

Designing highly efficient, stable, and pH-universal perovskites for hydrogen evolution reaction (HER) is urgently needed yet remains a grand challenge. Herein, a titanium-containing strontium ruthenate (SrTi0.5Ru0.5O3, STRO) is developed as an excellent HER electrocatalyst in a wide pH range. The introduction of Ti into SrRuO3 significantly reduces the size of STRO, endowing with a high reactivity that facilitates a deep surface-reconstruction during HER. Furthermore, Sr2+ leaching triggered reconstruction leads to STRO breaking into tiny nanoparticles accompanied by high-valence ruthenium (Ru) species reducing to metallic Ru. The generated active species, increased accessible sites, and improved electrical conductivity greatly boost HER. The reconstructed STRO displays remarkable HER activities with exceptional low overpotentials of 18, 24, and 55 mV at 10 mA cm-2 in 1 m KOH, 0.5 m H2SO4, and 1 m PBS, respectively, surpassing most perovskites reported previously and comparable to or even outperforming that of commercial Pt/C. Moreover, the STRO exhibits excellent stabilities over 200 h in alkaline and acidic media, superior to that of Pt/C. This work not only provides insights into structure reconstruction of perovskites during HER, but also opens new perspectives for developing high-efficiency and pH-universal electrocatalysts for future energy applications.

B-site Doping Boosts the OER and ORR Performance of Double Perovskite Oxide as Air Cathode for Zinc-Air Batteries.

Double perovskite oxides are key players as electrocatalytic oxygen catalysts in alkaline media. In this study, we synthesized B-site doped NdBaCoaFe2-aO5+δ (a= 1.0, 1.4, 1.6, 1.8) electrocatalysts, systematically to probe their bifunctionality and assess their performance in zinc-air batteries as air cathodes. X-ray photoelectron spectroscopy analysis reveals a correlation between iron reduction and increased oxygen vacancy content, influencing electrocatalyst bifunctionality by lowering the work function. The electrocatalyst with highest cobalt content, NdBaCo1.8Fe0.2O5+δ exhibited a bifunctional index of 0.95 V, outperforming other synthesized electrocatalysts. Remarkably, NdBaCo1.8Fe0.2O5+δ, demonstrated facilitated charge transfer rate in oxygen evolution reaction with four-electron oxygen reduction reaction process. As an air cathode in a zinc-air battery, NdBaCo1.8Fe0.2O5+δ demonstrated superior performance characteristics, including maximum capacity of 428.27 mA h at 10 mA cm-2 discharge current density, highest peak power density of 64 mW cm-2, with an outstanding durability and stability. It exhibits lowest voltage gap change between charge and discharge even after 350 hours of cyclic operation with a rate capability of 87.14%.

Tuning Exciton Emission via Ferroelectric Polarization at a Heterogeneous Interface between a Monolayer Transition Metal Dichalcogenide and a Perovskite Oxide Membrane.

We demonstrate the integration of a thin BaTiO3 (BTO) membrane with monolayer MoSe2 in a dual-gate device that enables in situ manipulation of the BTO ferroelectric polarization with a voltage pulse. While two-dimensional (2D) transition metal dichalcogenides (TMDs) offer remarkable adaptability, their hybrid integration with other families of functional materials beyond the realm of 2D materials has been challenging. Released functional oxide membranes offer a solution for 2D/3D integration via stacking. 2D TMD excitons can serve as a local probe of the ferroelectric polarization in BTO at a heterogeneous interface. Using photoluminescence (PL) of MoSe2 excitons to optically read out the doping level, we find that the relative population of charge carriers in MoSe2 depends sensitively on the ferroelectric polarization. This finding points to a promising avenue for future-generation versatile sensing devices with high sensitivity, fast readout, and diverse applicability for advanced signal processing.

A-Site Engineering of the High-Entropy Perovskite Pr0.4La0.4Ba0.4Sr0.4Ca0.4Fe2O5+δ Cathode for Intermediate-Temperature SOFCs.

Mixed-oxygen ionic and electronic conduction is crucial for the cathode materials of solid oxide fuel cells, ensuring high efficiency and low-temperature operation. However, the electronic and oxygen ionic conductivity of traditional Fe-based layered perovskite cathode materials is low, resulting in insufficient oxygen reduction reactivity. Herein, a type of high-entropy perovskite oxide consisting of five equimolar metals, Pr0.4La0.4Ba0.4Sr0.4Ca0.4Fe2O5+δ (PLBSCF), a high-performance cobalt-free cathode derived from the PrBaFe2O5+δ (PBF), is proposed. Such A-site engineering could not only increase the oxygen vacancy concentration of PLBSCF but also give higher conductivity than PBF, thus significantly reducing the polarization impedance of the symmetric cell to only 0.052 Ω·cm2 at 750 °C. The good output performance of a single cell is also realized. The peak power density of the single cell with PLBSCF-Ce0.9Gd0.1O2-δ (GDC) as the cathode at 750 °C was 0.853 W·cm-2. Additionally, the single cell with the PLBSCF cathode exhibits a good durable performance of 100 h at 750 °C. Combining the distribution of relaxation time analysis, it can be seen that the enhancement of the oxygen reduction reaction is due to the reduction of intermediate-frequency and low-frequency resistance, indicating an improvement in the charge transfer process and adsorption/dissociation process of molecular oxygen.

Charge Redistribution in High-Entropy Perovskite Oxide Porous Nanotubes Boosts Nitrate Electroreduction to Ammonia.

High-entropy perovskite oxides are promising materials in the field of electrocatalysis due to their advantages such as large spatial composition regulation, entropy effects, and tunable material properties. However, the preparation of high-entropy perovskite oxides with stable and controllable structures still remains challenging. Herein, we fabricated a series of high-entropy perovskite oxide porous nanotubes (PNTs) by electrospinning as efficient electrocatalysts for the nitrate reduction reaction (NO3RR). We further revealed that the different diffusion and decomposition behaviors of metal ions and polymers during the calcination process are the key to the formation of high-entropy perovskite oxide PNTs. Especially, LaSrNiCoMnFeCuO3 PNTs show excellent performance of the NO3RR, achieving the maximum NH3 Faradaic efficiency of almost 100%, yield rate of 1657.5 µg h-1 mgcat.-1, and durable stability after successive cycling, being one of the best electrocatalysts for the NO3RR. The mechanism studies show that the charge redistribution induced by the multisite synergistic effect and abundant unsaturated sites in the high-entropy perovskite oxide PNTs favors the adsorption of NO3- and key intermediates and reduces the catalytic energy barrier, thus further achieving high NO3- conversion efficiency.

Surface Reconstruction of La2CuO4 during the Electrochemical Reduction of Carbon Dioxide to Ethylene and Its Benefits for Enhanced Performance.

Electrochemical reduction (ECR) of CO2 to C2H4 has a potential key role in realizing the carbon neutral future, which ultimately relies on the availability of an efficient electrocatalyst that can exhibit a high Faradaic efficiency (FE) for C2H4 production and robust, long-term operational stability. Here, for the first time, we report that upon applying reductive potential and electrolyte to the benchmark La2CuO4 catalyst, surface reconstruction occurred, i.e., the appearance of a distinctive phase evolution process over time, which was successfully monitored using ex situ powder XRD and operando Mott-Schottky (M-S) measurements of La2CuO4 samples that were soaked into the electrolyte and subjected to CO2-ECR for different durations. At the end of such a reconstruction process, an outermost layer consisting of lanthanum carbonate, a thin outer layer made of an amorphous Cu+ material formed over the core bulk La2CuO4, as confirmed by various characterization techniques, which resulted in the redistribution of interfacial electrons and subsequent formation of electron-rich and electron-deficient interfaces. This contributed to the enhancement in FE for C2H4, reaching as much as 58.7%. Such surface reconstruction-induced electronic structure tuning gives new explanations for the superior catalytic performance of La2CuO4 perovskite and also provides a new pathway to advance CO2-ECR technology.

Doping-Induced piezoelectricity in Ba2Nb2-xFexO6-δ double perovskite oxides for efficient hydrogen peroxide production via piezocatalysis in pure water.

Piezocatalysis has emerged as a sustainable alternative for hydrogen peroxide production. However, the current development of efficient piezocatalysts is predominantly focusing on those conventional piezoelectric ceramic oxides with high permittivity and limited catalytic activities. Therefore, innovative approaches to develop novel piezocatalysts in particular from these outstanding paraelectric semiconductors are highly required. In this work, by employing a feasible doping strategy, robust piezoelectric property is created on the Ba2Nb2-xFexO6-δ double perovskite oxides, typically characterized by a stable paraelectric cubic structure. Optimum Fe doping not only intensifies the double perovskite phase but also inspires a phase transition from a centrosymmetric cubic to a piezoelectric tetragonal phase, thereby achieving desirable piezoelectricity and enabling a series of favorable physical properties including redox activity, active sites of anion defects, reduced bandgap, and increased free charge density. All these are important factors to enhance piezocatalytic activity. As a result, Ba2NbFeO6-δ achieved by the optimum Fe doping demonstrated exceptional piezocatalytic H2O2 yield of 512 and 690 µmol g-1 h-1 under atmosphere and oxygen-purging conditions, respectively, without the presence of any sacrificial agents. Mechanistic investigations reveal that both water oxidation and oxygen reduction involve in the H2O2 production, wherein piezopotential plays a critical role not only in facilitating the charge carrier separation and transportation but also in modulating the band structure to enhance the catalyst redox capacity. This study offers a feasible and universal strategy for the design of novel piezocatalysts, expanding the windows for catalyst selection for piezocatalysis.

Organic Passivation-Enhanced Ferroelectricity in Perovskite Oxide Films.

Perovskite oxides and organic-inorganic halide perovskite materials, with numerous fascinating features, have been subjected to extensive studies. Most of the properties of perovskite materials are dependence on their ferroelectricity that denoted by remanent polarization (Pr). Thus, the increase of Pr in perovskite films is mainly an effort in material physics. At present, commonplace improvement schemes, i.e., controlling material crystallinity, and post-annealing by using a high-temperature process, are normally used. However, a simpler and temporal strategy for Pr improvement is always unavailable to perovskite material researchers. In this study, an organic coating layer, low-temperature, and vacuum-free strategy is proposed to improve the Pr, directly increasing the Pr from 36 to 56 µC cm-2. Further study finds that the increased Pr originates from the suppression of the oxygen defects and Ti defects. This organic coating layer strategy for passivating the defects may open a new way for the preparation of higher-performance and cost-effective perovskite products, further improving its prospective for application in the electron devices field.

High-Entropy Perovskite Oxides as a Family of Electrocatalysts for Efficient and Selective Nitrogen Oxidation.

Electrocatalytic nitrogen oxidation reaction (NOR) can convert nitrogen (N2) into nitrate (NO3-) under ambient conditions, providing an attractive approach for synthesis of NO3-, alternative to the current approach involving the harsh Haber-Bosch and Ostwald oxidation processes that necessitate high temperature, high pressure, and substantial carbon emission. Developing efficient NOR catalysts is a prerequisite, which remains a formidable challenge, owing to the weak activation/dissociation of N2. A variety of NOR electrocatalysts have been developed, but their NOR kinetics are still extremely sluggish, resulting in inferior Faradaic Efficiencies. Here, we report a high-entropy Ru-based perovskite oxide (denoted as Ru-HEP) that can function as a high-performance NOR catalyst and exhibit a high NO3- yield rate of 39.0 µmol mg-1 h-1 with a Faradaic Efficiency of 32.8%. Both our experimental results and theoretical calculations suggest that the high-entropy configuration of Ru-HEP perovskite oxide can markedly enhance the oxygen-vacancy concentration, where the Ru sites and their neighboring oxygen vacancies can serve as unsaturated centers and decrease the overall energy barrier for N2 electrooxidation, thereby leading to promoted NOR kinetics. This work presents an alternative avenue for promoting NOR catalysis on perovskite oxides through the high-entropy engineering strategy.

Rb-Doped Perovskite Oxides: Surface Enrichment and Structural Reconstruction During the Oxygen Evolution Reaction.

Alkali-metal doped perovskite oxides have emerged as promising materials due to their unique properties and broad applications in various fields, including photovoltaics and catalysis. Understanding the complex interplay between alkali metal doping, structural modifications, and their impact on performance remains a crucial challenge. In this study, this challenge is addressed by investigating the synthesis and properties of Rb-doped perovskite oxides. These results reveal that the doping of Rb into perovskite oxides function as a structural modifier in the as-synthesized samples and during the oxygen evolution reaction (OER) as well. Electron microscopy and first-principles calculations confirm the enrichment of Rb on the surface of the as-synthesized sample. Further investigations into the electrocatalytic reaction revealed that the Rb-doped perovskite underwent drastic restructuring with Rb leaching and formation of strontium oxide.

Activating Inert Perovskite Oxides for CO2 Electroreduction via Slight Cu2+ Doping in B-Sites.

Perovskite oxides are proven as a striking platform for developing high-performance electrocatalysts. Nonetheless, a significant portion of them show CO2 electroreduction (CO2RR) inertness. Here a simple but effective strategy is reported to activate inert perovskite oxides (e.g., SrTiO3) for CO2RR through slight Cu2+ doping in B-sites. For the proof-of-concept catalysts of SrTi1-xCuxO3 (x = 0.025, 0.05, and 0.1), Cu2+ doping (even in trace amount, e.g., x = 0.025) can not only create active, stable CuO6 octahedra, increase electrochemical active surface area, and accelerate charge transfer, but also significantly regulate the electronic structure (e.g., up-shifted band center) to promote activation/adsorption of reaction intermediates. Benefiting from these merits, the stable SrTi1-xCuxO3 catalysts feature great improvements (at least an order of magnitude) in CO2RR activity and selectivity for high-order products (i.e., CH4 and C2+), compared to the SrTiO3 parent. This work provides a new avenue for the conversion of inert perovskite oxides into high-performance electrocatalysts toward CO2RR.

Anchored Cobalt Nanoparticles on Layered Perovskites for Rapid Peroxymonosulfate Activation in Antibiotic Degradation.

In the Fenton-like reaction, revealing the dynamic evolution of the active sites is crucial to achieve the activity improvement and stability of the catalyst. This study reports a perovskite oxide in which atomic (Co0) in situ embedded exsolution occurs during the high-temperature phase transition. This unique anchoring strategy significantly improves the Co3+/Co2+ cycling efficiency at the interface and inhibits metal leaching during peroxymonosulfate (PMS) activation. The Co@L-PBMC catalyst exhibits superior PMS activation ability and could achieve 99% degradation of tetracycline within 5 min. The combination of experimental characterization and density functional theory (DFT) calculations elucidates that the electron-deficient oxygen vacancy accepts an electron from the Co 3d-orbital, resulting in a significant electron delocalization of the Co site, thereby facilitating the adsorption of the *HSO5/*OH intermediate onto the "metal-VO bridge" structure. This work provides insights into the PMS activation mechanism at the atomic level, which will guide the rational design of next-generation catalysts for environmental remediation.

A High-Performance and Durable Direct-Ammonia Symmetrical Solid Oxide Fuel Cell with Nano La0.6Sr0.4Fe0.7Ni0.2Mo0.1O3-δ-Decorated Doped Ceria Electrode.

Solid oxide fuel cells (SOFCs) offer a significant advantage over other fuel cells in terms of flexibility in the choice of fuel. Ammonia stands out as an excellent fuel choice for SOFCs due to its easy transportation and storage, carbon-free nature and mature synthesis technology. For direct-ammonia SOFCs (DA-SOFCs), the development of anode catalysts that have efficient catalytic activity for both NH3 decomposition and H2 oxidation reactions is of great significance. Herein, we develop a Mo-doped La0.6Sr0.4Fe0.8Ni0.2O3-δ (La0.6Sr0.4Fe0.7Ni0.2Mo0.1O3-δ, LSFNM) material, and explore its potential as a symmetrical electrode for DA-SOFCs. After reduction, the main cubic perovskite phase of LSFNM remained unchanged, but some FeNi3 alloy nanoparticles and a small amount of SrLaFeO4 oxide phase were generated. Such reduced LSFNM exhibits excellent catalytic activity for ammonia decomposition due to the presence of FeNi3 alloy nanoparticles, ensuring that it can be used as an anode for DA-SOFCs. In addition, LSFNM shows high oxygen reduction reactivity, indicating that it can also be a cathode for DA-SOFCs. Consequently, a direct-ammonia symmetrical SOFC (DA-SSOFC) with the LSFNM-infiltrated doped ceria (LSFNM-SDCi) electrode delivers a superior peak power density (PPD) of 487 mW cm-2 at 800 °C when NH3 fuel is utilised. More importantly, because Mo doping greatly enhances the reduction stability of the material, the DA-SSOFC with the LSFN-MSDCi electrode exhibits strong operational stability without significant degradation for over 400 h at 700 °C.

The effect of partial substitution of noble metal (Pd) at the B site of La0.6Sr0.4FeO3 as a supercapacitor electrode material.

Sol-gel combustion was used to produce the perovskite-type La0.6Sr0.4FeO3 (LSF) and La0.6Sr0.4Fe0.9Pd0.1O3 (LSFP) materials and assessed as supercapacitor electrodes. The synthesized materials' crystal structure, morphology, and electrochemical performance were thoroughly analyzed. The partial substitution of Pd in the B site of the LSF structure affected the electrochemical properties of this compound and improved its performance. In fact, the greatest effect of Pd substitution was on the content of oxygen vacancies, which are known as the active sites of the perovskite surface in the supercapacitor cell. The specific capacitance obtained for the sample containing Pd was about 80 F.g-1 at a current density of 1 A.g-1 in 1M KOH. In addition, this sample had a decreased intrinsic resistance to ion and electron diffusion. The remarkable structural and morphological features of LSFP contribute to its superior electrochemical performance. At a power density of 1000 W.kg-1 and a current density of 1 A.g-1, an LSFP symmetrical cell had an energy density of 44.45 W.h.kg-1.