Characterization and assessment of exposure risks of healthcare personnel during the COVID-19 pandemic.

Introduction: Healthcare personnel have the right to decent, healthy, and safe working conditions during COVID-19. Despite our best efforts to safeguard them against SARS-CoV-2 infection, a substantially large number of healthcare personnel fell ill and succumbed to COVID-19. This study aimed to characterize the SARS-CoV-2 exposures among healthcare personnel and determine the risk level of those events, thereby identifying and focusing on the key areas that influence workplace safety. Materials and Methods: A pre-tested questionnaire was used to collect data from healthcare personnel on the type of exposure, place, and use of preventive measures, along with demographic and occupational data. Exposure events were categorized into low, moderate, and high-risk by using a risk categorization protocol. Results: Doctors were primarily found to be involved in the aerosol-generating procedure, which had 94 times higher odds (95% CI: 43.9926-201.17) for high-risk exposures than other activities. In contrast, nurses were more likely to experience close-contact exposures (OR: 2.77, 95% CI: 1.44-5.33). Both critical care units and operation theaters were identified to have higher odds (OR: 2.34, 95% CI: 1.33-4.23 and OR: 2.31; 95% CI: 0.99-5.42, respectively) than the wards for high-risk exposures. Use of personal protective equipment was poor, with breaches reported in 10.2% of all exposure events. The lacunae in practice were addressed by repeated training and counseling and by ensuring the adequacy of resources in required areas. Conclusions: The assessment was beneficial for safeguarding healthcare personnel and assuring a safer workplace during the early phase of the COVID-19 pandemic.

Wearable Sensor Node for Safety Improvement in Workplaces: Technology Assessment in a Simulated Environment.

Personal protective equipment (PPE) has been universally recognized for its role in protecting workers from injuries and illnesses. Smart PPE integrates Internet of Things (IoT) technologies to enable continuous monitoring of workers and their surrounding environment, preventing undesirable events, facilitating rapid emergency response, and informing rescuers of potential hazards. This work presents a smart PPE system with a sensor node architecture designed to monitor workers and their surroundings. The sensor node is equipped with various sensors and communication capabilities, enabling the monitoring of specific gases (VOC, CO2, CO, O2), particulate matter (PM), temperature, humidity, positional information, audio signals, and body gestures. The system utilizes artificial intelligence algorithms to recognize patterns in worker activity that could lead to risky situations. Gas tests were conducted in a special chamber, positioning capabilities were tested indoors and outdoors, and the remaining sensors were tested in a simulated laboratory environment. This paper presents the sensor node architecture and the results of tests on target risky scenarios. The sensor node performed well in all situations, correctly signaling all cases that could lead to risky situations.

Detection of Pharmaceutical Personal Protective Equipment in Video Stream.

Pharmaceutical manufacturing is a complex process, where each stage requires a high level of safety and sterility. Personal Protective Equipment (PPE) is used for this purpose. Despite all the measures of control, human factor (improper PPE wearing) causes numerous losses for human health and material property. This research proposes solid computer vision system for ensuring safety in pharmaceutical laboratories. For this we have tested wide range of state-of-the-art object detection methods. Composing previously obtained results in this sphere with our own approach to this problem, we have reached the high accuracy (mAP@0.5) ranging from 0.77 up to 0.98 in detecting all the elements of common set of PPE used in pharmaceutical laboratories. Our system is the step towards safe medicine producing.

Effects of cooling vest and personal protective equipment removal on thermoregulation in wildland firefighters during progressive thermal loads.

Background: Wildland firefighters (WFFs) regularly face demanding physical and environmental conditions during their duties, such as high ambient temperatures, challenging terrains, heavy equipment and protective gear. These conditions can strain thermoregulatory responses, leading to increased fatigue and posing risks to their health and safety. This study examined the effectiveness of two cooling interventions during physical activity in hot environments. Methods: Eight active male WFFs participated, comparing the effects of wearing a cooling vest (VEST) and personal protective equipment removal (PASSIVE) against a control condition (PPE). Participants walked on a treadmill at a speed of 6 km·h-1 for approximately 75-min under hot conditions (30°C and 30% relative humidity). Incremental slope increases were introduced every 15 min after the initial 20 min of activity, with 5-min passive recovery between each increment. Physiological and perceptual parameters were monitored throughout the protocol. Results: Significant main effects (p < 0.05) were observed in skin temperature (36.3 ± 0.2, 36.2 ± 0.4 and 35.4 ± 0.6°C in PPE, PASSIVE and VEST, respectively), physiological strain index (5.2 ± 0.4, 5.6 ± 1.1 and 4.3 ± 1.4 in PPE, PASSIVE and VEST) and thermal sensation (6.6 ± 0.6, 6.4 ± 0.7 and 5.3 ± 0.7 in PPE, PASSIVE, and VEST). However, no significant effects of the cooling strategies were observed on heart rate, gastrointestinal temperature or performance. Conclusion: Despite the observed effects on physiological responses, neither cooling strategy effectively mitigated thermal strain in WFFs under the experimental conditions tested.

The Relationship Between Attitude, Belief, Experience, and Knowledge of Iranian Nurses Toward the Use of Personal Protective Equipment: A Cross-Sectional Study.

Background: Utilizing Personal Protective Equipment (PPE) is pivotal in averting infection transmission to both patients and nurses. The attitude of nurses is a critical determinant in their compliance with PPE usage. This study seeks to explore the correlation between the attitudes of Iranian nurses and their beliefs, experiences, and knowledge concerning the application of PPE. Materials and Methods: In this cross-sectional study, 303 nurses employed in hospitals affiliated with Kurdistan University of Medical Sciences (Iran) were chosen using a quota sampling technique. Between April and June 2022, they completed self-administered questionnaires, which consisted of a Demographic Information form and a four-part questionnaire on "Attitude, Belief, Experience, Knowledge" concerning the utilization of PPE. Data were analyzed utilizing descriptive and inferential statistical methods. The multiple linear regression model was applied to investigate the relationship between attitude scores and various examined variables. Results: The findings indicated that most participants held bachelor's degrees (93.07%), and their attitude scores toward using PPE exceeded 3.25 out of 6 for all 12 questions. Female gender, increased work experience, and higher organizational positions exhibited positive and significant associations with a favorable attitude toward PPE utilization. Conversely, the absence of training related to PPE, a lack of belief in infection control, and limited knowledge displayed negative correlations. Conclusions: Nurses have an ethical obligation to adhere to infection control guidelines, including consistently utilizing PPE, regardless of the level of infection risk or the visibility of the infection. Continuous training and regular monitoring of nurses in this context are indispensable.

Bioinspired Flexible Kevlar/Hydrogel Composites with Antipuncture and Strain-Sensing Properties for Personal Protective Equipment.

Currently, multifunction has become an essential direction of personal protective equipment (PPE), but achieving the protective effect, flexibility, physiological comfort, and intelligent application of PPE simultaneously is still a challenge. Herein, inspired by the meso-structure of rhinoceros skin, a novel strategy is proposed by compounding an ammonium sulfate ((NH4)2SO4) solution soaked gelatin hydrogel with the high weight fraction and vertically interwoven Kevlar fibers to manufacture a flexible and wearable composite with enhanced puncture resistance and strain-sensing properties. After (NH4)2SO4 solution immersion, the hydrogel's tensile strength, toughness, and fracture strain were up to 3.77 MPa, 4.26 MJ/m3, and 305.19%, respectively, indicating superior mechanical properties. The Kevlar/hydrogel composites revealed excellent puncture resistance (quasi-static of 132.06 N and dynamic of 295.05 N), flexibility (138.13 mN/cm), and air and moisture permeability (17.83 mm/s and 2092.73 g m-2 day-1), demonstrating a favorable balance between the protective effect and wearing comfort even after 7 days of environmental exposure. Meanwhile, salt solution immersion endowed the composite with excellent strain-sensing properties at various bending angles (30-90°) and frequencies (0.25-1 Hz) and allowed it to monitor different human motions directly in real-time. The rhinoceros-skin-inspired Kevlar/hydrogel composites provide a simple and economical solution for antipuncture materials that combine high protective effects, a comfortable wearing experience, and good strain-sensing properties, promising multifunctional PPE in the future.

[Sustainability in occupational dermatology : Starting points, challenges, and potentials for sustainable care of work-related skin diseases]. / Nachhaltigkeit in der Berufsdermatologie : Ansatzpunkte, Herausforderungen und Potenziale für eine nachhaltige(re) Versorgung beruflich Hauterkrankter.

Sustainability is becoming increasingly important in healthcare and has moved into focus at various levels. This article aims to provide an overview of guiding principles, concepts, and target systems of sustainability and to transfer these to occupational dermatology. Current and future starting points are outlined for various levels, e.g., politics, research, industry, and patient care, in order to link sustainability and occupational dermatology in a structured and systematic way and to transform the structures of patient care in occupational dermatology care towards sustainability. Using the specific example of protective gloves, which is a pivotal personal protective measure to prevent work-related hand eczema, starting points, potentials, and challenges are analyzed and specific possibilities and perspectives for more ecologically sustainable action are presented.

Knowledge, attitudes and practices regarding respirable silica exposure and personal protective equipment use among brick kiln workers in Nepal.

OBJECTIVES: Brick kiln workers in Nepal are a neglected population who are exposed to high respirable silica concentrations, and few use interventions to reduce exposure. We aimed to characterise the prevalence of respiratory personal protective equipment (PPE) use, understand knowledge and attitudes towards kiln dust and respiratory PPE and identify factors associated with respiratory PPE use. METHODS: We conducted a cross-sectional study in Bhaktapur, Nepal. We used simple random selection to identify 10 out of 64 total kilns and stratified random sampling of 30 households to enrol workers aged ≥14 years within selected kilns. Field workers surveyed participants using structured questionnaires. Our primary outcome was to characterise the prevalence of current respiratory PPE use and secondary outcomes were summaries of knowledge, attitudes and practice of PPE use. RESULTS: We surveyed 83 workers (mean age 30.8 years, 77.1% male). Of these, 28.9% reported current respiratory PPE use at work, 3.6% heard of silicosis prior to the survey and 24.1% correctly identified the best respiratory PPE (N95, compared with surgical masks and barrier face coverings) for reducing dust exposure. Respiratory PPE users had higher income (mean monthly household income US$206 vs US$145; p=0.04) and education levels (25% vs 5.1% completed more than primary school; p=0.02) compared with non-users. CONCLUSIONS: Respiratory PPE use was low. Workers had poor knowledge of kiln dust health effects and proper respiratory PPE. We highlight important barriers to PPE use, particularly knowledge gaps, which can guide future investigations to reduce the silicosis burden among brick kiln workers.

A Cross-Sectional Analysis of Bystander Cardiopulmonary Resuscitation (CPR): Behavioural Changes in the COVID-19 Era.

Objectives The coronavirus disease 2019 (COVID-19) pandemic has impacted public health systems and individuals' behaviour, with decreasing survival rates among out-of-hospital cardiac arrest (OHCA) patients. Bystander cardiopulmonary resuscitation (CPR) improves OHCA outcomes, which may have been affected by COVID-19. We sought to understand the impacts of COVID-19 on bystanders' willingness to administer CPR in three Canadian provinces. Methods Participants ≥ 18 years of age were surveyed online about their current and recalled pre-pandemic attitudes toward CPR and perceived transmission risk. We compared mean willingness to perform various CPR actions before and during the pandemic using paired t-tests. Differences in willingness across three provinces were assessed using analysis of variance (ANOVA) and Tukey's Honestly Significant Difference (HSD) test. We also conducted Chi-square tests to assess changes in willingness to perform CPR on children and older adults. Results Five hundred thirty-five participants were surveyed from October 1 to November 15, 2021. The mean age was 42.7 years (SD 14.5), and 60.2% were female. Participants reported less willingness to perform chest compressions on strangers during the pandemic compared to their recollections before the pandemic (mean willingness 86.2% vs. 94.3% prior, p<0.001). With personal protective equipment (PPE) available, particularly masks, willingness recovered to 91.3% (p<0.001). Willingness was higher in Nova Scotia (NS) than in British Columbia (BC) or Ontario (ON). Reluctance to assist older adults increased from 6.6% to 12.0% (p=0.020). Conclusions This study highlights changes in CPR willingness during the COVID-19 pandemic, underscoring the importance of PPE and offering insights into public health strategies pertaining to CPR during a pandemic.

Personal Protective Equipment Use and Surface Contamination With Antineoplastic Drugs: The Impact of the COVID-19 Pandemic.

BACKGROUND: Surface contamination with antineoplastic drugs (ADs) is persistent. The use of personal protective equipment (PPE) is recommended to reduce exposure to ADs. OBJECTIVES: This study explored the impact of the COVID-19 pandemic on nurses' PPE use and surface contamination with ADs. METHODS: Demographic characteristics, PPE use, and associated factors were assessed on two inpatient oncology units where etoposide and cyclophosphamide were administered before (N = 26) and during the COVID-19 pandemic (N = 31). FINDINGS: PPE use when handling contaminated excreta was significantly higher during the pandemic. Perceived risk of chemotherapy exposure was significantly associated with greater PPE use when handling AD-contaminated excreta, and conflict of interest was related to less PPE use during AD administration and handling of AD-contaminated excreta. During the pandemic, surface contamination with etoposide increased in shared areas and decreased in patient rooms.

Firefighter uncompensable heat stress results in excessive upper body temperatures measured by infrared thermography: Implications for cooling strategies.

This research sought to evaluate the thermal zones of the upper body and firefighter personal protective equipment (PPE) immediately following uncompensable heat stress (0.03 °C increase/min). We hypothesized that the frontal portion of the head and the inside of the firefighter helmet would be the hottest as measured by infrared thermography. This hypothesis was due to previous research demonstrating that the head accounts for ∼8-10% of the body surface area, but it accounts for ∼20% of the overall body heat dissipation during moderate exercise. Twenty participants performed a 21-min graded treadmill exercise protocol (Altered Modified Naughton) in an environmental chamber (35 °C, 50 % humidity) in firefighter PPE. The body areas analyzed were the frontal area of the head, chest, abdomen, arm, neck, upper back, and lower back. The areas of the PPE that were analyzed were the inside of the helmet and the jacket. The hottest areas of the body post-exercise were the frontal area of the head (mean: 37.3 ± 0.4 °C), chest (mean: 37.5 ± 0.3 °C), and upper back (mean: 37.3 ± 0.4 °C). The coldest area of the upper body was the abdomen (mean: 36.1 ± 0.4 °C). The peak temperature of the inside of the helmet increased (p < 0.001) by 9.8 °C from 27.7 ± 1.6 °C to 37.4 ± 0.7 °C, and the inside of the jacket increased (p < 0.001) by 7.3 °C from 29.2 ± 1.7 °C to 36.5 ± 0.4 °C. The results of this study are relevant for cooling strategies for firefighters.

Load carriage does not reduce absolute mechanical power output but reduces agility in elite military police officers.

Objectives. The main objective of this study was to evaluate mean propulsive velocity (MPV), mean propulsive force (MPF) and mean propulsive power (MPP) in elite police officers under LOADED and UNLOADED conditions. The study also investigated the association of body composition and strength levels under the same load conditions. Methods. Twenty-one men from an elite unit in Brazil participated in the study, performing Smith machine half squats and an agility test. Dual energy X-ray absorptiometry measured body composition; a linear encoder measured MPV, MPF and MPP during the half squats; and a manual chronometer registered agility test performance. Results. The results showed that wearing and carrying occupational loads did not alter the squat exercise's MPP, MPV and MPF but reduced the performance of relative MPP and agility (p < 0.05). The results also showed that MPP had a higher association with force (i.e., MPF and one-repetition maximum [1RM]) than velocity (i.e., MPV and agility) under the LOADED condition (p < 0.05). Among the body composition variables, only lean body mass was associated with MPP under the LOADED condition (p < 0.05). Conclusion. These findings suggest that load carriage does not reduce absolute mechanical power output, but reduces the relative MPP and agility in military police officers.

Factors influencing nurses' compliance related to the use of personal protective equipment during the COVID-19 pandemic: A descriptive cross-sectional study.

AIM: To determine how nurses' experiences with the coronavirus disease (COVID-19) pandemic affected their knowledge, awareness, and compliance related to the use of personal protective equipment (PPE) during the COVID-19 pandemic in South Korea. DESIGN: A descriptive cross-sectional study. METHODS: A total of 247 nurses in South Korea participated in this study between May 10 and 19, 2023. An online self-report questionnaire was used to collect data on demographic and occupational characteristics, COVID-19 experience, knowledge, awareness, and compliance related to the use of PPE. Factors affecting compliance were analysed using hierarchical multiple linear regression. RESULTS: Mean age of the nurses was 31.92, and 94.3% were women. Most had a bachelor's degree or higher and the mean clinical experience as a nurse was 6.45 years. Knowledge of the use of PPE was 8.45 out of 10, awareness was 3.52 out of 5, and compliance was 4.28 out of 5. Knowledge and awareness were correlated with compliance related to PPE use. Awareness (ß = 0.234, p < 0.001), knowledge (ß = 0.218, p < 0.001), experience caring for COVID-19 patients (ß = 0.234, p = 0.004), optional fourth dose vaccine (ß = 0.150, p = 0.017), clinical experience (ß = 0.140, p = 0.022), and COVID-19 infection control education (ß = 0.115, p = 0.037) were found to have a significant impact on compliance. CONCLUSION: During the COVID-19 pandemic, nurses' knowledge and awareness of PPE use was a crucial factor in compliance. factors such as clinical experience, experience in caring for COVID-19 patients, optional vaccination, and completion of COVID-19 education also influenced compliance. We hope that these factors can provide a basis for developing training programs for nurses to respond to future emerging infectious diseases.

Helmet wearing and related factors among electric personal mobility device users in Korea.

Using data from the 2022 Korea Community Health Survey (n = 13 320), this study investigated helmet use and related factors among Korean adults using personal mobility devices, without distinguishing between private and hired users. Among mobility device users, 32.1% responded that they always wore a helmet. The proportion of helmet use was 35.2% among men, 25.8% among women, 29.2% among those aged 19-44 years, 42.3% among those aged 45-64 years and 26.6% among those aged 65 years or older. Furthermore, those who drank less frequently and were physically active were more likely to wear helmets. Moreover, people who always wore a seat belt when driving a car or sitting in the rear seat and people who always wore a helmet when riding a motorcycle were more likely to wear a helmet while using electric personal mobility devices. Approximately one-third of users always wore a helmet. The helmet-wearing rate was related to general characteristics such as gender and education level, and to safety behaviors such as wearing a seat belt when driving a car, sitting in the rear seat of a car, or when riding a motorcycle. In addition to considering personal characteristics investigated in this study, the helmet-wearing rate should be improved through policies or systems at the national or regional levels.

Evaluation of self-contained breathing apparatus (SCBA) weight on firefighter stamina, comfort, and postural stability.

Firefighters wear personal protective equipment to protect them from the thermal and chemical environment in which they operate. The self-contained breathing apparatus (SCBA) provides isolation of the airway from the hazardous fireground. National standards limit SCBA weight, however, integration of additional features could result in an SCBA exceeding the current limit. The purpose of this study was to examine the effects of increased SCBA weight on firefighters' physiological responses, work output, dynamic stability, and comfort. Completion of simulated firefighting activities induced a strong physiological response. Peak oxygen consumption was higher with the lightest SCBA than the heaviest SCBA. Few other physiological differences were noted as SCBA weight increased. Importantly, increased SCBA weight resulted in significantly more negative perceptions by the firefighters and a trend towards significance for the duration of work time prior to reaching volitional fatigue. These results should be considered when assessing changes to existing SCBA weight limits.

Increased SCBA weight above existing national standards resulted in negative perceptions by the firefighters, but not significant physiological changes after two simulated bouts of firefighting activity. SCBA weight had a nearly significant impact on the time firefighters worked before reaching volitional fatigue, with heavier SCBA trending towards decreased working time.

Povidone-iodine functionalized nanofibers are prophylactic and protect against dissemination of SARS-CoV-2 infection.

The novel personal protection equipment based on a face mask equipped with a nanofiber filter functionalized with povidone iodine has been developed and tested in a clinical trial. This nanofiber filter was characterized with a low flow resistance and, thus, allowed comfortable breathing. The performed study proved that the novel nanofiber filter with incorporated povidone-iodine was characterized with a slow release of iodine which minimized side effects but kept disinfection efficiency. Our clinical study performed on 207 positively tested SARS-CoV-2 patients wearing the PPE for 4-8 hours daily for 1 to 4 days has shown that even the iodine amount as low as 0.00028 ppm was sufficient to significantly decrease the reproduction number and, very importantly, to protect against severe course of disease.

Improving Safety and Comfort of Healthcare Workers Caring for Patients With High-Consequence Infectious Diseases in a High-Level Isolation Unit Using Innovative Approaches.

Patients with high-consequence infectious diseases (HCIDs) require high-quality care by specially trained staff in a high-level isolation unit (HLIU) that follows strict infection prevention and control (IPC) measures. Caring for patients with (suspected) HCID is challenging, mainly because of the strict personal protective equipment (PPE) and IPC protocols healthcare workers (HCW) must adhere to for protection. The Radboud University Medical Center, located in Nijmegen, the Netherlands, has been a dedicated HLIU facility since 2008. A newly built HLIU opened in May 2022, and encouraged us to review the existing PPE selection, IPC protocols, and HCID training program to improve safety and comfort for HCWs working in the HLIU. Based on a systematic search through (inter)national HCID PPE guidelines and semistructured interviews with end users, we selected an improved, more comfortable set of PPE. Additionally, we developed a more concise and easier-to-use patient care process flow and implemented a new teaching strategy. The new way of working was tested in October 2022 when the first 2 patients with suspected HCID were admitted to our unit. We used surveys to evaluate the experiences of HCWs involved in this care to further improve the workflow of the unit. When optimizing safety and comfort for HCWs, it is important to consider (inter)national guidelines as well as user preferences. By systematically evaluating recent experiences of patient admission to the HLIU and then adjusting protocols and training, we can ensure that the quality of provided healthcare and the safety of HCWs working in the HLIU remains high.

Innovations and development of sustainable personal protective equipment: a path to a greener future.

The unprecedented surge in the demand for personal protective equipment (PPE) worldwide during the covid pandemic resulted in a significant increase in PPE consumption and subsequent waste generation. Despite the importance of PPE, its widespread usage and disposal have sparked worries about the environmental impact and its long-term sustainability. The increasing awareness of environmental challenges, resource scarcity, and the urgent need to mitigate climate change necessitates a paradigm shift in the product design, manufacturing process, and waste management of PPE. To address these challenges and have a sustainable PPE future, the development of degradable polymers and natural fibers offers a promising alternative to traditional plastics. Additionally, recycling and upcycling methods can convert the waste into valuable alternate products or energy sources, thereby reducing their environmental impact. Better waste management systems, comprehensive policy frameworks, and international collaborations are essential for the effective PPE waste management and the promotion of sustainable practices. Despite the challenges, collaborative efforts across governments, manufacturers, research institutions, and waste management authorities are crucial for transitioning to a more sustainable PPE industry and a circular economy, ultimately benefiting both the environment and society.