Effect of oxygen generating nanozymes on indocyanine green and IR 820 mediated phototherapy against oral cancer.

The hypoxic environment within a solid tumor is a limitation to the effectiveness of photodynamic therapy. Here, we demonstrate the use of oxygen generating nanozymes (CeO2, Fe3O4, and MnO2) to improve the photodynamic effect. The optimized combination of process parameters for irradiation was obtained using the Box Behnken experimental design. Indocyanine green, IR 820, and their different combinations with oxygen generators were studied for their effect on oral carcinoma. Dynamic light scattering technique showed the average particle size of CeO2, MnO2, and Fe3O4 to be 211 ± 16, and 157 ± 28, 143 ± 19 nm with PDI of 0.23, 0.28 and 0.20 and a zeta potential of -2.6 ± 0.45, -2.4 ± 0.60 and  -6.1 ± 0.23 mV, respectively. The formation of metal oxides was confirmed using UV-visible, FTIR, and X-ray photon spectroscopies. The amount of dissolved oxygen produced by CeO2, MnO2, and Fe3O4 in the presence of H2O2 within 2 min was 1.7 ± 0.15, 1.7 ± 0.16, and 1.4 ± 0.12 mg/l, respectively. Growth inhibition studies in the FaDu oral carcinoma spheroid model showed a significant (P < 0.05) increase in growth reduction from 81 ± 2.9 and 88 ± 2.1% to 97 ± 1.2 and 99 ± 1.0% for ICG and IR 820, respectively, after irradiation (808 nm laser, 1 W/cm2, 5 min) in the presence of CeO2 (25 µg/ml). In conclusion, oxygen-generating nanozymes can improve the photodynamic effect of ICG and IR 820.

Ultrafast Metaphotonic PCR Chip with Near-Perfect Absorber.

Polymerase chain reaction (PCR) is the gold standard for nucleic acid amplification and quantification in diverse fields such as life sciences, global health, medicine, agricultural science, forensic science, and environmental science for global sustainability. However, implementing a cost-effective PCR remains challenging for rapid preventive medical action to the widespread pandemic diseases due to the absence of highly efficient and low-cost PCR chip-based POC molecular diagnostics. Here, this work reports an ultrafast metaphotonic PCR chip as a solution of a cost-effective and low-power-consumption POC device for the emerging global challenge of sustainable healthcare. This work designs a near-perfect photonic meta-absorber using ring-shaped titanium nitride to maximize the photothermal effect and realize rapid heating and cooling cycles during the PCR process. This work fabricates a large-area photonic meta-absorber on a 6-inch wafer cost-effectively using simple colloidal lithography. In addition, this work demonstrates 30 thermocycles from 65 (annealing temperature) to 95 °C (denaturation temperature) within 3 min 15 s, achieving an average 16.66 °C s-1 heating rate and 7.77 °C s-1 cooling rate during thermocycling, succeeding rapid metaphotonic PCR. This work believes a metaphotonic PCR chip can be used to create a low-cost, ultrafast molecular diagnostic chip with a meta-absorber.

On-demand Opto-Laser activatable nanoSilver ThermoGel for treatment of full-thickness diabetic wound in a mouse model.

Patients suffering from diabetes mellitus are prone to develop diabetic wounds that are non-treatable with conventional therapies. Hence, there is an urgent need of hour to develop the therapy that will overcome the lacunas of conventional therapies. This investigation reports the Quality by Design-guided one-pot green synthesis of unique Opto-Laser activatable nanoSilver ThermoGel (OL→nSil-ThermoGel) for hyperthermia-assisted treatment of full-thickness diabetic wounds in mice models. The characterization findings confirmed the formation of spherical-shaped nanometric Opto-Laser activatable nanoSilver (30.75 ± 2.7 nm; ∆T: 37 ± 0.2 °C â†’ 66.2 ± 0.1 °C; at 1.8 W/cm2 NIR laser density). The findings indicated acceptable in vitro cytocompatibility and significant keratinocyte migration (95.04 ± 0.07 %) activity of OL→nSil towards HaCaT cells. The rheological data of OL→nSil hybridized in situ thermoresponsive gel (OL→nSil-ThermoGel) showed the gelling temperature at 32 ± 2 °C. In vivo studies on full-thickness diabetic wounds in a Mouse model showed OL→nSil-ThermoGel accelerated wound closure (94.42 ± 1.03 %) and increased collagen synthesis, angiogenesis, and decreased inflammatory markers. Similarly, immunohistochemistry study showed significant angiogenesis and faster phenotypic switching of fibroblasts to myofibroblasts in OL→nSil-ThermoGel treated diabetic wounds. Histological evaluation revealed a marked rise in keratinocyte migration, organized collagen deposition, and early regeneration of the epithelial layer compared to the diabetic wound control. In conclusion, the OL→nSil-ThermoGel modulates the cytokines, re-epithelialization, protein expression, and growth factors, thereby improving the repair and regeneration of diabetic wounds in mice.

Photothermal Assisted Biomass Oxidation for Pairing Carbon Dioxide Electroreduction with Low Cell Potential.

Integrating anodic biomass valorization with carbon dioxide electroreduction (CO2RR) can produce value-added chemicals on both the cathode and anode; however, anodic oxidation still suffers from high overpotential. Herein, a photothermal-assisted method was developed to reduce the potential of 5-hydroxymethyl furfural (HMF) electrooxidation. Capitalizing on the copious oxygen vacancies, defective Co3O4 (D-Co3O4) exhibited a stronger photothermal effect, delivering a local temperature of 175.47 oC under near infrared light illumination. The photothermal assistance decreased the oxidation potential of HMF from 1.7 V over pristine Co3O4 to 1.37 V over D-Co3O4 to achieve a target current density of 30 mA cm-2, with 2,5-furandicarboxylic acid as the primary product. Mechanistic analysis disclosed that the photothermal effect did not change the HMF oxidation route but greatly enhanced the adsorption capacity of HMF. Meanwhile, faster electron transfer for direct HMF oxidation and the surface conversion to cobalt (oxy)hydroxide, which contributed to indirect HMF oxidation, was observed. Thus, rapid HMF conversion was realized, as evidenced by in situ surface-enhanced infrared spectroscopy. Upon coupling cathodic CO2RR with an atomically dispersed Ni-N/C catalyst, the Faradaic efficiencies of CO (cathode) and 2,5-furandicarboxylic acid (FDCA, anode) exceeded 90.0% under a low cell potential of 1.77 V.

Photothermal induction of pyroptosis in malignant glioma spheroids using (16-mercaptohexadecyl)trimethylammonium bromide-modified cationic gold nanorods.

Plasmonic photothermal therapy (PPTT) employing plasmonic gold nanorods (GNRs) presents a potent strategy for eradication of tumors including aggressive brain gliomas. Despite its promise, there is a pressing need for a more comprehensive evaluation of PPTT using sophisticated in vitro models that closely resemble tumor tissues, thereby facilitating the elucidation of therapeutic mechanisms. In this study, we exposed 3D glioma spheroids (tumoroids) to (16-mercaptohexadecyl)trimethylammonium bromide-functionalized gold nanorods (MTAB-GNRs) and a near-infrared (NIR) laser. We demonstrate that the photothermal effect can be fine-tuned by adjusting the nanoparticle concentration and laser power. Depending on the selected parameters, the laser can trigger either regulated or non-regulated cell death (necrosis) in both mouse GL261 and human U-87 MG glioma cell lines, accompanied by translocation of phosphatidylserine in the membrane. Our investigation into the mechanism of regulated cell death induced by PPTT revealed an absence of markers associated with classical apoptosis pathways, such as cleaved caspase 3. Instead, we observed the presence of cleaved caspase 1, gasdermin D, and elevated levels of NLRP3 in NIR-irradiated tumoroids, indicating the activation of pyroptosis. This finding correlates with previous observations of lysosomal accumulation of MTAB-GNRs and the known lysosomal pathway of pyroptosis activation. We further confirmed the absence of toxic breakdown products of GNRs using electron microscopy, which showed no melting or fragmentation of gold nanoparticles under the conditions causing regulated cell death. In conclusion, PPTT using coated gold nanorods offers significant potential for glioma cell elimination occurring through the activation of pyroptosis rather than classical apoptosis pathways.

V-doped MoS2 nanozymes providing reactive oxygen species and depleting glutathione for photothermally-enhanced nanocatalytic therapy.

Introduction: The tumor microenvironment and multidrug resistance of tumor cells seriously impair the activity of the nanozymes. Methods: Herein, a polyethylene glycol (PEG)-modified vanadium-doped molybdenum disulfide (V-MoS2@PEG) nanozymes were constructed to enhance anti-tumor activity through multi-enzymatic catalysis and photothermal effect with simultaneous reactive oxygen species replenishment and glutathione depletion. Results and discussion: V-MoS2@PEG nanosheets exerted peroxidase activity by causing molybdenum ion (Mo4+) to react with hydrogen peroxide to form toxic hydroxyl radicals (·OH). Meanwhile, the V-doping can deplete glutathione avoiding ·OH consumption. In addition, the high heat generated by V-MoS2@PEG nanozymes under near-infrared laser irradiation brought about a desirable local temperature gradient, which produced an enhanced catalytic effect by promoting band bending. Furthermore, the photothermally inspired polarized charge increased the permeability of the tumor cell membrane and promoted further aggregation of the nanozymes, which realized the combination of photothermal therapy with multi-enzymatic catalysis, solved the problem of multi-enzyme catalysis, and improved the anti-tumor efficiency.

Iron-Reduced Graphene Oxide Core-Shell Micromotors Designed for Magnetic Guidance and Photothermal Therapy under Second Near-Infrared Light.

Core-shell micro/nanomotors have garnered significant interest in biomedicine owing to their versatile task-performing capabilities. However, their effectiveness for photothermal therapy (PTT) still faces challenges because of their poor tumor accumulation, lower light-to-heat conversion, and due to the limited penetration of near-infrared (NIR) light. In this study, we present a novel core-shell micromotor that combines magnetic and photothermal properties. It is synthesized via the template-assisted electrodeposition of iron (Fe) and reduced graphene oxide (rGO) on a microtubular pore-shaped membrane. The resulting Fe-rGO micromotor consists of a core of oval-shaped zero-valent iron nanoparticles with large magnetization. At the same time, the outer layer has a uniform reduced graphene oxide (rGO) topography. Combined, these Fe-rGO core-shell micromotors respond to magnetic forces and near-infrared (NIR) light (1064 nm), achieving a remarkable photothermal conversion efficiency of 78% at a concentration of 434 µg mL-1. They can also carry doxorubicin (DOX) and rapidly release it upon NIR irradiation. Additionally, preliminary results regarding the biocompatibility of these micromotors through in vitro tests on a 3D breast cancer model demonstrate low cytotoxicity and strong accumulation. These promising results suggest that such Fe-rGO core-shell micromotors could hold great potential for combined photothermal therapy.

Progress on Material Design and Device Fabrication via Coupling Photothermal Effect with Thermoelectric Effect.

Recovery and utilization of low-grade thermal energy is a topic of universal importance in today's society. Photothermal conversion materials can convert light energy into heat energy, which can now be used in cancer treatment, seawater purification, etc., while thermoelectric materials can convert heat energy into electricity, which can now be used in flexible electronics, localized cooling, and sensors. Photothermoelectrics based on the photothermal effect and the Seebeck effect provide suitable solutions for the development of clean energy and energy harvesting. The aim of this paper is to provide an overview of recent developments in photothermal, thermoelectric, and, most importantly, photothermal-thermoelectric coupling materials. First, the research progress and applications of photothermal and thermoelectric materials are introduced, respectively. After that, the classification of different application areas of materials coupling photothermal effect with thermoelectric effect, such as sensors, thermoelectric batteries, wearable devices, and multi-effect devices, is reviewed. Meanwhile, the potential applications and challenges to be overcome for future development are presented, which are of great reference value in waste heat recovery as well as solar energy resource utilization and are of great significance for the sustainable development of society. Finally, the challenges of photothermoelectric materials as well as their future development are summarized.

A novel photothermal-assisted FeNi2S4@Mn0.3C0.7S S-scheme heterojunction for enhanced photo-catalytic hydrogen evolution.

In addition to the intrinsic driving force of photocatalysis, the external thermal field from the photothermal effect can provide additional energy to the photo-catalytic system to improve the photo-catalytic hydrogen-evolution (PHE) efficiency. Herein, based on the results of density functional theory, we designed and constructed a hollow core-shell FeNi2S4@Mn0.3Cd0.7S (NFS@MCS) S-scheme heterojunction with a photothermal effect, thereby realising a significant enhancement of the PHE performance due to the thermal effect, S-scheme heterojunction and hollow core-shell morphology. As a light collector and heat source, the hollow NFS could absorb and convert photons into heat, resulting in the increased local temperature of photocatalyst particles. Moreover, the S-scheme charge path at the interface not only improved the carrier separation efficiency but also retained a higher redox potential. All these are favourable to increase the PHE activity. The PHE tests show that 0.5 %-NFS@MCS exhibits the highest PHE rate of 17.11 mmol·g-1·h-1, 7.7 times that of MCS. Moreover, through a combination of theoretical calculation and experimental evidence, the PHE mechanism of the NFS@MCS system is discussed and clarified in-depth.

Redox Concomitant Formation Method for Fabrication of Cu(I)-MOF/Polymer Composites with Antifouling Properties.

Marine biofouling, which is one of the technical challenges hindering the growth of the marine economy, has been controlled using cuprous oxide (Cu2O) nanoparticles due to the exceptional antifouling properties of Cu(I) ions. However, Cu2O nanoparticles have encountered bottlenecks due to explosive releases of Cu+ ions, high toxicity at elevated doses, and long-term instability. Here, we present a novel method called Redox Concomitant Formation (RCF) for fabricating a hierarchical Cu(I) metal-organic framework polypyrrole (Cu(I)-MOF/PPy) composite. This method enables in-situ phase transition via successive redox reactions that change the chemical valence state and coordination mode of Cu(II)-MOF, resulting in a new structure of Cu(I)-MOF while creating a PPy layer surrounded by the hierarchical structure. Owing to the steady release of Cu+ ions from the Cu(I) sites and photothermal properties of PPy, Cu(I)-MOF/PPy exhibits superior and broad-spectrum resistance to marine bacteria, algae, and surface-adhered biofilms in complex biological environments, as well as long-term stability, resulting in 100% eradication efficiency under solar-driven heating. Mechanistic insights into successive structural redox reactions and formation using the RCF method are provided in detail, enabling the fabrication of novel MOFs with the desired composition and structure for a wide range of potential applications.

Near-infrared-triggered plasmonic regulation and cardiomyocyte-based biosensing system for in vitro bradyarrhythmia treatment.

Bradyarrhythmia, a life-threatening cardiovascular disease, is an increasing burden for the healthcare system. Currently, surgery, implanted device, and drug are introduced to treat the bradyarrhythmia in clinical practice. However, these conventional therapeutic strategies suffer from the invasive surgery, power supply, or drug side effect, respectively, hence developing the alternative therapeutic strategy is necessarily imperative. Here, a convenient and effective strategy to treat the bradyarrhythmia is proposed using near-infrared-triggered Au nanorod (NR) based plasmonic photothermal effect (PPE). Moreover, electrophysiology of cardiomyocytes is dynamically monitored by the integrated biosensing-regulating system during and after the treatment. Cardiomyocyte-based bradyarrhythmia recover rhythmic for a long time by regulating plasmonic photothermal effect. Furthermore, the regulatory mechanism is qualitatively investigated to verify the significant thermal stimulation in the recovery process. This study establishes a reliable platform for long-term recording and evaluation of mild photothermal therapy for bradyarrhythmia in vitro, offering an efficient and non-invasive strategy for the potential clinical applications.

The therapeutic efficacy of different configuration nano-polydopamine drug carrier systems with photothermal synergy against head and neck squamous cell carcinoma.

Head and neck squamous cell carcinoma (HNSCC) is the sixth most common malignant tumor worldwide. Considering its special anatomical site and the progressive resistance to chemotherapy drugs, the development of more effective, minimally invasive and precise treatment methods is urgently needed. Nanomaterials, given their special properties, can be used as drug carrier systems to improve the therapeutic effect and reduce the adverse effects. The drug carrier systems with photothermal effect can promote the killing of cancer cells and help overcome drug resistance through heat stress. We selected dopamine, a simple raw material, and designed and synthesized three different configurations of nano-polydopamine (nPDA) nanomaterials, including nPDA balls, nPDA plates and porous nPDA balls. In addition to the self-polymerization and self-assembly, nPDA has high photothermal conversion efficiency and can be easily modified. Moreover, we loaded cisplatin into three different configurations of nPDA, creating nPDA-cis (the nano-drug carrier system with cisplatin), and comparatively studied the properties and antitumor effects of all the nPDA and nPDA-cis materials in vitro and nPDA-cis in vivo. We found that the photothermal effect of the nPDA-cis balls drug carrier system had synergistic effect with cisplatin, resulting in excellent antitumor effect and good clinical application prospects. The comparison of the three different configurations of drug carrier systems suggested the importance of optimizing the spatial configuration design and examining the physical and chemical properties in the future development of nano-drug carrier systems. In this study, we also noted the duality and complexity of the influences of heat stress on tumors in vitro and in vivo. The specific mechanisms and the synergy with chemotherapy and immunotherapy will be an important research direction in the future.

CA IX-targeted Ag2S quantum dots bioprobe for NIR-II imaging-guided hypoxia tumor chemo-photothermal therapy.

Hypoxia is the common characteristic of almost all solid tumors, which prevents therapeutic drugs from reaching the tumors. Therefore, the development of new targeted agents for the accurate diagnosis of hypoxia tumors is widely concerned. As carbonic anhydrase IX (CA IX) is abundantly distributed on the hypoxia tumor cells, it is considered as a potential tumor biomarker. 4-(2-Aminoethyl)benzenesulfonamide (ABS) as a CA IX inhibitor has inherent inhibitory activity and good targeting effect. In this study, Ag2S quantum dots (QDs) were used as the carrier to prepare a novel diagnostic and therapeutic bioprobe (Ag2S@polyethylene glycol (PEG)-ABS) through ligand exchange and amide condensation reaction. Ag2S@PEG-ABS can selectively target tumors by surface-modified ABS and achieve accurate tumor imaging by the near infrared-II (NIR-II) fluorescence characteristics of Ag2S QDs. PEG modification of Ag2S QDs greatly improves its water solubility and stability, and therefore achieves high photothermal stability and high photothermal conversion efficiency (PCE) of 45.17%. Under laser irradiation, Ag2S@PEG-ABS has powerful photothermal and inherent antitumor combinations on colon cancer cells (CT-26) in vitro. It also has been proved that Ag2S@PEG-ABS can realize the effective treatment of hypoxia tumors in vivo and show good biocompatibility. Therefore, it is a new efficient integrated platform for the diagnosis and treatment of hypoxia tumors.

Sandwich-structured continuous ZIF-8/Ti3C2 MXene/ZIF-8 for efficient sterilization: Enhanced photocatalytic activity, photothermal effect, and environmental safety.

The development of effective water purification systems is crucial for controlling and remediating environmental pollution, especially in terms of sterilization. Herein, we demonstrate elaborately designed composite nanosheets with a sandwich structure, composed of two-dimensional (2D) Ti3C2 MXene nanosheet core and conformal ZIF-8 ultrathin outer layers, and their potential applications in photocatalytic sterilization. The study results indicate that the conformal ZIF-8-MXene nanosheet exhibits an expanded light absorption range (826 nm), improved photothermal conversion efficiency (6.2 °C s-1), and photocurrent response, thus boosting photocatalytic sterilization efficiency (6.63 log10 CFU mL-1) against Escherichia coli under simulated sunlight within 90 min. Interestingly, 2D ZIF-8 layers exhibit positive zeta potential (19 mV), good hydrophilicity (40.6°), and local photogenerated-hole accumulation, possessing efficient bacteria-trapping efficiency. Membrane filters fabricated from optimized composite nanosheets exhibit an outstanding bacteria-trapping and sterilization efficiency (almost 100 %) against Escherichia coli under simulated sunlight within 30 min of the flow photocatalytic experiments. This work not only presents a rational structural design of the conformal and ultrathin anchoring of ZIF-8 onto a 2D conductive material for bacteria-trapping and sterilization, but also opens new opportunities for using metal-organic frameworks in photocatalytic disinfection of drinking water.

Chemodynamic PtMn Nanocubes for Effective Photothermal ROS Storm a Key Anti-Tumor Therapy in-vivo.

Background: Chemodynamic therapy (CDT) is a new treatment approach that is triggered by endogenous stimuli in specific intracellular conditions for generating hydroxyl radicals. However, the efficiency of CDT is severely limited by Fenton reaction agents and harsh reaction conditions. Methods: Bimetallic PtMn nanocubes were rationally designed and simply synthesized through a one-step high-temperature pyrolysis process by controlling both the nucleation process and the subsequent crystal growth stage. The polyethylene glycol was modified to enhance biocompatibility. Results: Benefiting from the alloying of Pt nanocubes with Mn doping, the structure of the electron cloud has changed, resulting in different degrees of the shift in electron binding energy, resulting in the increasing of Fenton reaction activity. The PtMn nanocubes could catalyze endogenous hydrogen peroxide to toxic hydroxyl radicals in mild acid. Meanwhile, the intrinsic glutathione (GSH) depletion activity of PtMn nanocubes consumed GSH with the assistance of Mn3+/Mn2+. Upon 808 nm laser irradiation, mild temperature due to the surface plasmon resonance effect of Pt metal can also enhance the Fenton reaction. Conclusion: PtMn nanocubes can not only destroy the antioxidant system via efficient reactive oxygen species generation and continuous GSH consumption but also propose the photothermal effect of noble metal for enhanced Fenton reaction activity.

A functional hydrogel of dopamine-modified gelatin with photothermal properties for enhancing infected wound healing.

Infected skin wound has gradually become a prevalent injury that affects overall health. Currently, biomaterials with good adhesion, efficient antibacterial properties, and angiogenesis are considered as a suitable way to effectively heal infected wound. Herein, a multifunctional hydrogel comprising gelatin, dopamine (DA), and ferric ions (Fe3+) was developed for infected wound healing. The modified gelatin-dopamine (Gel-DA) enhanced adhesive capability. Subsequently introducing ferric ions (Fe3+) to form Gel-DA-Fe3+ hydrogels by Fe3+ and catechol coordination bonds. The designed hydrogels demonstrated multifaceted functionality, encompassing photothermal antibacterial, angiogenesis, and so on. The introduction of DA enhanced the adhesion of Gel-DA-Fe3+ to the skin surface and might serve as a physical barrier to seal wound. Meanwhile, DA and Fe3+ jointly endowed good photothermal effects to composite hydrogels, which could eliminate over 95 % of bacteria. In vitro results revealed that Gel-DA-Fe3+ hydrogels had good biocompatibility and promoted HUVECs migration and tube formation. Furthermore, in vivo studies confirmed that Gel-DA-Fe3+ hydrogels markedly expedited the wound healing of rats through eradicating bacteria, accelerating the deposition of collagen, and promoting angiogenesis. What's more, Gel-DA-Fe3+ hydrogels under near-infrared laser had a more pronounced ability for wound healing. Therefore, Gel-DA-Fe3+ hydrogels had great potential for application in bacteria-infected wound healing.

Prussian Blue-Derived Nanocomposite Synergized with Calcium Overload for Three-Mode ROS Outbreak Generation to Enhance Oncotherapy.

Calcium overload can lead to tumor cell death. However, because of the powerful calcium channel excretory system within tumor cells, simplistic calcium overloads do not allow for an effective antitumor therapy. Hence, the nanoparticles are created with polyethylene glycol (PEG) donor-modified calcium phosphate (CaP)-coated, manganese-doped hollow mesopores Prussian blue (MMPB) encapsulating glucose oxidase (GOx), called GOx@MMPB@CaP-PEG (GMCP). GMCP with a three-mode enhancement of intratumor reactive oxygen species (ROS) levels is designed to increase the efficiency of the intracellular calcium overload in tumor cells to enhance its anticancer efficacy. The released exogenous Ca2+ and the production of cytotoxic ROS resulting from the perfect circulation of the three-mode ROS outbreak generation that Fenton/Fenton-like reaction and consumption of glutathione from Fe2+/Fe3+and Mn2+/Mn3+ circle, and amelioration of hypoxia from MMPB-guided and GOx-mediated starvation therapy. Photothermal efficacy-induced heat generation owing to MMPB accelerates the above reactions. Furthermore, abundant ROS contribute to damage to mitochondria, and the calcium channels of efflux Ca2+ are inhibited, resulting in a calcium overload. Calcium overload further increases ROS levels and promotes apoptosis of tumor cells to achieve excellent therapy.

Multifunctional Laser-Induced Graphene-Based Microfluidic Chip for High-Performance Oocyte Cryopreservation with Low Concentration of Cryoprotectants.

Oocyte cryopreservation is essential in the field of assisted reproduction, but due to the large size and poor environmental tolerance of oocytes, cell freezing technology needs further improvement. Here, a Y-shaped microfluidic chip based on 3D graphene is ingeniously devised by combining laser-induced graphene (LIG) technology and fiber etching technology. The prepared LIG/PDMS microfluidic chip can effectively suppress ice crystal size and delay ice crystal freezing time by adjusting surface hydrophobicity. In addition, LIG endows the microfluidic chip with an outstanding photothermal effect, which allows to sharply increase its surface temperature from 25 to 71.8 °C with 10 s of low-power 808 nm laser irradiation (0.4 W cm-2). Notably, the LIG/PDMS microfluidic chip not only replaces the traditional cryopreservation carriers, but also effectively reduces the dosage of cryoprotectants (CPAs) needed in mouse oocyte cryopreservation. Even when the concentration of CPAs is cut in half (final concentration of 7.5% ethylene glycol (EG) and 7.5% dimethyl sulfoxide (DMSO)), the survival rate of oocytes is still as high as 92.4%, significantly higher than the control group's 85.8%. Therefore, this work provides a novel design strategy to construct multifunctional microfluidic chips for high-performance oocytes cryopreservation.

Advancements and Challenges in the Application of Metal-Organic Framework (MOF) Nanocomposites for Tumor Diagnosis and Treatment.

Nanoscale metal-organic frameworks (MOFs) offer high biocompatibility, nanomaterial permeability, substantial specific surface area, and well-defined pores. These properties make MOFs valuable in biomedical applications, including biological targeting and drug delivery. They also play a critical role in tumor diagnosis and treatment, including tumor cell targeting, identification, imaging, and therapeutic methods such as drug delivery, photothermal effects, photodynamic therapy, and immunogenic cell death. The diversity of MOFs with different metal centers, organics, and surface modifications underscores their multifaceted contributions to tumor research and treatment. This review is a summary of these roles and mechanisms. The final section of this review summarizes the current state of the field and discusses prospects that may bring MOFs closer to pharmaceutical applications.

Solar Energy-Driven Reverse Water Gas Shift Reaction: Photothermal Effect, Photoelectric Activation and Selectivity Regulation.

Excessive carbon dioxide (CO2) emissions are one of the main causes of the greenhouse effect. Thermal catalytic reverse water gas shift (RWGS) reaction, which is a pre reaction for Fischer-Tropsch synthesis, is considered an effective way to convert CO2 and synthesize high value-added chemicals in industry. However, traditional thermal catalysis requires a large amount of fossil fuels to drive reactions, which cannot achieve the true goal of carbon neutrality. Photothermal catalysis, as a novel conversion pathway, can achieve efficient CO2 conversion while significantly improving solar energy utilization. This review provides a detailed introduction of CO2 and H2 adsorption/activation and reaction pathways in thermal catalysis, as well as the catalytic mechanisms of thermal and chemical effects in photothermal catalytic RWGS to supply readers valuable insights on the mechanism of photothermal catalytic RWGS reaction and provide a reference for better catalyst design.