Lightweight, ultra-compressed, and environmentally friendly wood/TPU aerogel sensor based on optimized performance of dynamic 3D pore structure.

Although bio-based sensing materials have a wide range of applications in the field of pressure detection, they still need to improve their sensitivity, detection limit and hysteresis. This paper studied the relationship between the 3D pore structure and sensing performance under dynamics. Using Balsa wood as the substrate, CWA/TPU aerogel and its sensor were prepared with lightweight, compressibility, highly sensitivity, wide-detection, and low-hysteresis. Meanwhile, the brittleness problem of the carbonized aerogel was solved by uniformly attaching TPU to the aerogel interface. In this paper, the 3D structure of CWA/TPU aerogel during compression was reconstructed by Micro-XCT technology, and the results show that the sensitivity of the bio-based carbonized material is directly proportional to the porosity and inversely proportional to the aspect ratio. This CWA/TPU aerogel pressure sensor has a high sensitivity of 76.18 kPa-1 in a wide detection limit of 0.6 Pa-100 kPa, 90 % supercompression strain, ±7.4 % low hysteresis and outstanding stability over 10,000 cycles. And the sensor can detect different ranges of pressure strains and has great potential for future applications in physiological signal monitoring, action recognition, and sports training.

Dynamics of salt precipitation at pore scale during CO2 subsurface storage in saline aquifer.

CO2 storage in deep saline aquifers is an effective strategy for reducing greenhouse gas emission. However, salt precipitation triggered by evaporation of water into injected dry CO2 causes injectivity reduction. Predicting the distribution of precipitated salts and their impact on near-well permeability remains challenging. Therefore, a detailed investigation of the interactions between salt precipitation and porous domain is essential for of revealing the mechanisms of pore blockage due to salt crystallization. Through series of microfluidic experiments, direct observations, coupled with detailed imaging processing, form the basis for explaining these phenomena and provide a relationship between water and salt saturations, highlighting the critical roles played by local capillary-driven flow and water film along grains in influencing water relocation. The results reveal two distinct types of salt crystallization: occurring inside the brine with smooth edges and at the CO2-brine interface with rough edges. Furthermore, the impact of local heterogeneity and surface wettability on salt precipitation patterns is discussed. The transition region between the porous domains and inlet/outlet channels exhibits brine backflow and a larger amount of salt accumulation. This paper presents a comprehensive analysis of the dynamic process of salt dry-out occurring during CO2 injection at the pore scale.

Response to the comments on "Cellular aggregation dictates universal spreading behaviour of a whole-blood drop on a paper strip".

In 2023, we published a research article in the Journal of Colloidal and Interface Science, based on our experimental findings and substantiating scaling arguments leading to a simple theoretical insight on the effect of red blood cell (RBC) aggregation on the wicking behaviour of a finite volume of blood as it navigates through the porous passages of a paper matrix (Laha et al., 2023). Of late, we received comments from Li (2024), which offered certain suggestions regarding the possible improvement of the capillary bundle model as considered in our article for analyzing the transport of blood through the paper pores. Herein, we provide a detailed discussion on each of the points raised by Li (2024) and rationalize our views in further details in addition to the contents already provided in our concerned article.

Precision pore structure optimization of additive manufacturing porous tantalum scaffolds for bone regeneration: A proof-of-concept study.

Currently, the treatment of bone defects in arthroplasty is a challenge in clinical practice. Nonetheless, commercially available orthopaedic scaffolds have shown limited therapeutic effects for large bone defects, especially for massiveand irregular defects. Additively manufactured porous tantalum, in particular, has emerged as a promising material for such scaffolds and is widely used in orthopaedics for its exceptional biocompatibility, osteoinduction, and mechanical properties. Porous tantalum has also exhibited unique advantages in personalised rapid manufacturing, which allows for the creation of customised scaffolds with complex geometric shapes for clinical applications at a low cost and high efficiency. However, studies on the effect of the pore structure of additively manufactured porous tantalum on bone regeneration have been rare. In this study, our group designed and fabricated a batch of precision porous tantalum scaffolds via laser powder bed fusion (LPBF) with pore sizes of 250 µm (Ta 250), 450 µm (Ta 450), 650 µm (Ta 650), and 850 µm (Ta 850). We then performed a series of in vitro experiments and observed that all four groups showed good biocompatibility. In particular, Ta 450 demonstrated the best osteogenic performance. Afterwards, our team used a rat bone defect model to determine the in vivo osteogenic effects. Based on micro-computed tomography and histology, we identified that Ta 450 exhibited the best bone ingrowth performance. Subsequently, sheep femur and hip defect models were used to further confirm the osteogenic effects of Ta 450 scaffolds. Finally, we verified the aforementioned in vitro and in vivo results via clinical application (seven patients waiting for revision total hip arthroplasty) of the Ta 450 scaffold. The clinical results confirmed that Ta 450 had satisfactory clinical outcomes up to the 12-month follow-up. In summary, our findings indicate that 450 µm is the suitable pore size for porous tantalum scaffolds. This study may provide a new therapeutic strategy for the treatment of massive, irreparable, and protracted bone defects in arthroplasty.

Analyzing Mitochondrial Calcium Influx in Isolated Mitochondria.

Mitochondria play a crucial role in Ca2+ signaling and homeostasis and can contribute to shaping the cytosolic Ca2+ landscape as well as regulate a variety of pathways including energy production and cell death. Dysregulation of mitochondrial Ca2+ homeostasis promotes pathologies including neurodegenerative diseases, cardiovascular disorders, and metabolic syndromes. The significance of mitochondria to Ca2+ signaling and regulation underscores the value of methods to assess mitochondrial Ca2+ import. Here we present a plate reader-based method using the Ca2+-sensitive fluorescent probe calcium green-5 N to measure mitochondrial Ca2+ import in isolated cardiac mitochondria. This technique can be expanded to measure Ca2+ uptake in mitochondria isolated from other tissue types and from cultured cells.

Effects of surface tension and contact angle on pore structure development of coal samples under chemical solution erosion.

To explore the influence of surfactant concentration on the pore structure and permeability of coal samples during the chemical enhancement of coalbed methane production, different kinds and different concentrations of surfactants were added to the chemical solution, and the coal samples were soaked. Methods such as low-field nuclear magnetic resonance testing (NMR), fractal theory, permeability testing, surface tension testing, and contact angle testing were employed to analyze the variation patterns of coal sample pore structure, fractal characteristics, and permeability, and to explore the correlation between surface tension, contact angle, and the degree of pore structure development. The results show that the increase in total porosity of coal samples, the increase in the seepage pore porosity, the decrease in Dt, and the growth rate of permeability increase with the increase in surfactant concentration, and are negatively correlated with the surface tension of the solution and the contact angle of the coal-solution interface, while the decrease in Ds is not significantly correlated with surfactant concentration, surface tension, or contact angle. In terms of the erosion effect of a chemical solution on coal samples, the influence of contact angle is greater than that of surface tension, while surface tension has the greatest impact on the development of adsorption pores. By adding different surfactants, the surface tension of the chemical solution and the contact angle of the coal-solution interface can be controlled, further promoting the erosion of coal samples, which is of positive significance for the chemical enhancement of coalbed methane production.

Cement and zeolite stabilization/solidification of heavy metal-contaminated sediments: 841-Day leaching characteristics, mechanisms, and microstructure.

The long-term effectiveness of stabilized/solidified sediments (S/S sediments) is increasingly attracting attention. This study investigated the long-term leaching characteristics and mechanisms of S/S sediment through an 841-day tank leaching test, considering the influence of cement content, curing time, and zeolite. The results indicate significant correlations among pH, heavy metals, TN, NH3-N, and COD. The specimens with 6 % cement cured for 30 days (C6(30)) demonstrated considerable heavy metal stabilization, with stabilization rates for Cr, Ni, Cu, Zn, As, and Pb reaching 99.81 %, 99.06 %, 98.93 %, 99.61 %, 97.58 %, and 99.97 %, respectively. Compared to C6(30), partial replacement of cement with 10 % zeolite (C5 + Z0.5(30)) not only more effectively stabilized heavy metals except As, but also reduced the release of COD and NH3-N by 4.23 % and 10.04 %, respectively. However, there was a risk of TN, NH3-N, and COD exceeding permissible limits during long-term leaching. Microscopic analysis results suggested that hydration products and low porosity contributed to stabilization of heavy metals. Leaching mechanisms was revealed that surface wash-off controls the leaching of Cr and Pb, while diffusion controls the leaching of Ni, Cu, Zn, As, COD, TN, and NH3-N. Considering stabilization performance, cost and carbon emissions, C5 + Z0.5(30) is an effective strategy for reducing long-term environmental risks of S/S sediments.

Pore modulation of single atomic Fe sites for ultrafast Fenton-like chemistry with amplified electron migration oxidation.

The limited interaction between pollutants, oxidants, and the surface catalytic sites of single atom catalysts (SACs) restricts the water decontamination effectiveness. Confining catalytic sites within porous structures enables the localized enrichment of reactants for optimized reaction kinetics, while the specific regulatory mechanisms remain unclear. Herein, SACs with porous modification significantly improves the utilization of peroxymonosulfate (PMS) and pollutant degradation activity. Confining catalytic sites in porous structure effectively reduces the mass transfer distance between radicals (SO4•- and •OH) and pollutants, thereby improving reaction performance. Pore modulation changes the surface electronic structure, leading to a significant improvement in the electron migration process. The system shows significant potential in effectively oxidizing various common emerging pollutants, and exhibits robust resistance to interference from environmental matrices. Moreover, a quantitative evaluation using life cycle assessment (LCA) indicates that the pFe-SAC/PMS system showcases superior environmental importance and practicality.

Therapeutic Performance of Needle Injection Versus Needle-Free Jet Injector System for Polynucleotide Filler in Skin Rejuvenation.

BACKGROUND: Polynucleotide (PN) filler often causes pain and can lead to delivery inaccuracies when applied via intradermal injection using a traditional needle. AIMS: To evaluate the efficacy of treatment and the pain during the procedure using conventional needle injection versus a needle-free jet system for intradermal PN filler application. METHODS: In this split-face clinical trial, 10 Korean subjects were enrolled. Each subject received an intradermal injection of PN filler on one side of the face and a needle-free jet injection using CureJet on the other side. Assessments included global and 3D skin imaging at each visit. Pain intensity was evaluated using visual analogue scale (VAS) scores during the injection. Additionally, patient satisfaction and adverse events were documented. RESULTS: Findings revealed that Global Aesthetic Improvement Scale scores and patient satisfaction were significantly higher with the CureJet compared to the needle injection method. VAS scores were notably lower on the CureJet side. Improvements in both pore and wrinkle indices were observed from baseline, with a more pronounced improvement rate on the CureJet side compared to the needle injection side. CONCLUSIONS: Needle-free injection of PN for aging skin was found to be effective in enhancing pore and wrinkle improvement, while reducing associated discomfort.

Tailoring the Microstructure and Porosity of Porous Piezoelectric Ceramics for Ultrasonic Transducer Application.

Porous piezoelectric ceramics and composites are advantageous for ultrasonic transducers due to their capability to decouple longitudinal and transverse modes, their improved voltage sensitivity, and their enhanced acoustic matching. However, the design and fabrication of porous piezoelectric ultrasonic transducers with excellent electromechanical properties are still challenging. In this work, porous lead zirconate titanate (PZT) ceramics with an aligned pore structure were prepared using the freeze-cast technique, and the effect of porous structure and porosity on the electromechanical parameters was investigated. The introduction of an aligned pore structure is beneficial to enhance the electromechanical properties and reduce the acoustic impedance. A high d33 (∼530 pC/N), a higher kt (∼0.676), and a lower acoustic impedance (∼10.4 MRalys) were achieved in the porous PZT ceramic with the porosity of 44 vol %. The effect of porosity and pore structure on the decoupling degree of vibration modes and ferroelectric polarization was considered to correct the homogeneous medium model, which can quantify the relationship between the kt and porosity of the porous structure. A demonstration of a piezoelectric ultrasonic transducer based on freeze-cast porous PZT ceramics was presented, which exhibits a -6 dB bandwidth of 52% and a theoretical axial resolution of 520 µm. This work therefore provides a potential alternative of piezoelectric ultrasonic transducers for nondestructive testing and imaging applications.

Molecular permeation through large pore channels: computational approaches and insights.

Computational methods such as molecular dynamics (MD) have illuminated how single-atom ions permeate membrane channels and how selectivity among them is achieved. Much less is understood about molecular permeation through eukaryotic channels that mediate the flux of small molecules (e.g. connexins, pannexins, LRRC8s, CALHMs). Here we describe computational methods that have been profitably employed to explore the movements of molecules through wide pores, revealing mechanistic insights, guiding experiments, and suggesting testable hypotheses. This review illustrates MD techniques such as voltage-driven flux, potential of mean force, and mean first-passage-time calculations, as applied to molecular permeation through wide pores. These techniques have enabled detailed and quantitative modeling of molecular interactions and movement of permeants at the atomic level. We highlight novel contributors to the transit of molecules through these wide pathways. In particular, the flexibility and anisotropic nature of permeant molecules, coupled with the dynamics of pore-lining residues, lead to bespoke permeation dynamics. As more eukaryotic large-pore channel structures and functional data become available, these insights and approaches will be important for understanding the physical principles underlying molecular permeation and as guides for experimental design.

Modulation of mitochondrial permeability transition pores in reperfusion injury: Mechanisms and therapeutic approaches.

Ischemia/reperfusion injury is attracting continuous interest in science for two reasons: because it affects several clinical conditions and because it has been identified, albeit in broad terms, the molecular entity becoming activated by the reperfusion damage paradoxes. Indeed, calcium, oxygen-dependent oxidative stress and pH would activate conformational changes in the mitochondrial cristae embedded F1/FO ATP synthase, allowing the formation of pores in the inner mitochondrial membrane thus increasing its permeability. This is a key determinant for mitochondrial stress, cell death and tissue dysfunction. Targeting each of these factors has never contributed to improved clinical outcome of the patients affected by reperfusion damage; now, the focus on the PTP opening could represent the closest target to solve this pathway made by extensive cell death when the tissues become revascularized. In this review, we summarized last knowledge about the structure, the modulation and the therapeutic targeting of the PTP, focusing on ATP synthase and cardiac ischemia/reperfusion.

Research on the microscopic pore-throat structure and reservoir quality of tight sandstone using fractal dimensions.

The pore-throat structure is a crucial parameter for evaluating reservoir characteristics and assessing the potential of oil and gas resources. Understanding the relationship between reservoir pore-throat variations and oil-bearing properties is essential. Through a combination of techniques, including thin-section casting, scanning electron microscopy (SEM), micro-computed tomography (micro-CT), and high-pressure mercury injection (HPMI), we examined the tight sandstone reservoirs from the Chang 4 + 5 members of the Yanchang Formation in the study area. This analysis elucidates the relationship between the pore-throat structure and fractal characteristics of the samples and their oil-bearing properties. The results show that : (1) The tight sandstone reservoirs in the study area mainly develop three types of pores: dissolution pores, residual intergranular pores, and microfractures. Residual intergranular pores are primarily controlled by early compaction processes, while dissolution processes easily form secondary pores, increasing the porosity of the reservoir. Microfractures can significantly enhance both the permeability of the reservoir. (2) Using the characteristic parameters of HPMI, the reservoir is classified into four categories, labeled as type I to type IV. As the categories progress from type I to type IV, pore-throat size decreases, porosity and permeability decrease, and reservoir properties deteriorate. The overall fractal dimension of pores decreases, while the fractal dimensions of individual pore types increase. Pore connectivity becomes more complex, and heterogeneity strengthens. (3) Reservoir porosity shows a strong positive correlation with permeability. As reservoir properties improve, the number of macropores increases, leading to a higher Reservoir Quality Index (RQI) and better oil-bearing characteristics.

Relevance of charged and polar amino acids for functionality of membrane toxin TisB.

Bacterial dormancy is marked by reduced cellular activity and the suspension of growth. It represents a valuable strategy to survive stressful conditions, as exemplified by the long-term tolerance towards antibiotics that is attributable to a fraction of dormant cells, so-called persisters. Here, we investigate the membrane toxin TisB (29 amino acids) from the chromosomal toxin-antitoxin system tisB/istR-1 in Escherichia coli. TisB depolarizes the inner membrane in response to DNA damage, which eventually promotes a stress-tolerant state of dormancy within a small fraction of the population. Using a plasmid-based system for moderate tisB expression and single amino acid substitutions, we dissect the importance of charged and polar amino acids. We observe that the central amino acids lysine 12 and glutamine 19 are of major importance for TisB functionality, which is further validated for lysine 12 in the native context upon treatment with the DNA-damaging antibiotic ciprofloxacin. Finally, we apply a library-based approach to test additional TisB variants in higher throughput, revealing that at least one positive charge at the C-terminus (either lysine 26 or 29) is mandatory for TisB-mediated dormancy. Our study provides insights into the molecular basis for TisB functionality and extends our understanding of bacterial membrane toxins.

The Role of Mitochondrial Permeability Transition in Bone Metabolism, Bone Healing, and Bone Diseases.

Bone is a dynamic organ with an active metabolism and high sensitivity to mitochondrial dysfunction. The mitochondrial permeability transition pore (mPTP) is a low-selectivity channel situated in the inner mitochondrial membrane (IMM), permitting the exchange of molecules of up to 1.5 kDa in and out of the IMM. Recent studies have highlighted the critical role of the mPTP in bone tissue, but there is currently a lack of reviews concerning this topic. This review discusses the structure and function of the mPTP and its impact on bone-related cells and bone-related pathological states. The mPTP activity is reduced during the osteogenic differentiation of mesenchymal stem cells (MSCs), while its desensitisation may underlie the mechanism of enhanced resistance to apoptosis in neoplastic osteoblastic cells. mPTP over-opening triggers mitochondrial swelling, regulated cell death, and inflammatory response. In particular, mPTP over-opening is involved in dexamethasone-induced osteoblast dysfunction and bisphosphonate-induced osteoclast apoptosis. In vivo, the mPTP plays a significant role in maintaining bone homeostasis, with many bone disorders linked to its excessive opening. Genetic deletion or pharmacological inhibition of the over-opening of mPTP has shown potential in enhancing bone injury recovery and alleviating bone diseases. Here, we review the findings on the relationship of the mPTP and bone at both the cellular and disease levels, highlighting novel avenues for pharmacological approaches targeting mitochondrial function to promote bone healing and manage bone-related disorders.

Nucleoporin Nsp1 surveils the phase state of FG-Nups.

Transport through the nuclear pore complex (NPC) relies on intrinsically disordered FG-nucleoporins (FG-Nups) forming a selective barrier. Away from the NPC, FG-Nups readily form condensates and aggregates, and we address how this behavior is surveilled in cells. FG-Nups, including Nsp1, together with the nuclear transport receptor Kap95, form a native daughter cell-specific cytosolic condensate in yeast. In aged cells, this condensate disappears as cytosolic Nsp1 levels decline. Biochemical assays and modeling show that Nsp1 is a modulator of FG-Nup condensates, promoting a liquid-like state. Nsp1's presence in the cytosol and condensates is critical, as a reduction of cytosolic levels in young cells induces NPC defects and a general decline in protein quality control that quantitatively mimics aging phenotypes. These phenotypes can be rescued by a cytosolic form of Nsp1. We conclude that Nsp1 is a phase state regulator that surveils FG-Nups and impacts general protein homeostasis.

Synthesis of a chitosan-based superabsorbent polymer and its influence on cement paste.

To address the challenge of adaptability between cement-based materials and conventional superabsorbent polymers (sodium polyacrylate, Na-PA), a chitosan-based superabsorbent polymer (CSP) with high salt and alkaline resistance was synthesized, and the optimal synthesis process was determined by a single-factor method. The macroscopic performance and microstructure of CSP and Na-PA were compared, and their influences on cement paste were studied. The results show that CSP exhibits a gradual swelling process during water absorption, which is independent of the solution environment. The poriferous structure of CSP allows it to form a network composed of gel membranes. The introduction of amide group enhances the resistance of CSP to salt and alkaline conditions. The autogenous shrinkage of cement paste is mitigated by CSP, with a superior effect compared to Na-PA. The longer desorption time of CSP allows it to promote cement hydration for a longer period, reducing the loss of compressive strength. The heat release, chemically bound water and hydration products (portlandite and amorphous substances) of CSP pastes are higher than those of Na-PA pastes. The water desorption from CSP fills some middle capillary pores and mesopores, leading to the pores in the hardened cement paste being more concentrated in smaller sizes.

The Influence of Particle Size and Calcium Content on Performance Characteristics of Metakaolin- and Fly-Ash-Based Geopolymer Gels.

This research systematically investigates the influence of raw material particle size and calcium content on the geopolymerization process to gain insight into the physical and mechanical properties of geopolymer gels, including setting time, fluidity, pore structure, compressive strength, and leaching characteristics of encapsulated Cr3+ heavy metal ions. Utilizing a diverse range of particle sizes of metakaolin (MK; 3.75, 7.5, and 12 µm) and fly ash (FA; 18, 45, and 75 µm), along with varied calcium levels, this study assesses the dual impact of these factors on the final properties of both metakaolin- and fly-ash-based geopolymers. Employing sophisticated analytical techniques such as Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and Nuclear Magnetic Resonance (NMR), the research meticulously documents alterations in chemical bonding, micro-morphology, and pore structures. Key findings reveal that reducing the size of MK and FA particles to 3.75 and 18 µm, respectively, enhances the compressive strength of their matrices by 128.37 and 297.58%, respectively, compared to their original values (63.59 and 33.87 MPa, respectively) at larger particle sizes. While smaller particle sizes significantly bolster compressive strength, they adversely affect slurry flow and reduce the leaching rates of Cr3+ from MK- and FA-based matrices, reaching 0.42 and 0.75 mg/L at 3.75 and 18 µm, respectively. Conversely, increased calcium content markedly enhances setting times and contributes to the formation of dense microstructures through the production of calcium aluminate silicate hydrate (C-A-S-H) gels, thus improving the overall curing performance and durability of the materials. These insights underline the importance of fine-tuning particle size and calcium content to optimize geopolymer formulations, offering substantial benefits for varied engineering applications and promoting more sustainable construction practices.

Heterogeneous Nuclear Ribonucleoprotein A1 Knockdown Alters Constituents of Nucleocytoplasmic Transport.

BACKGROUND/OBJECTIVES: Changes in nuclear morphology, alterations to the nuclear pore complex (NPC), including loss, aggregation, and dysfunction of nucleoporins (Nups), and nucleocytoplasmic transport (NCT) abnormalities have become hallmarks of neurodegenerative diseases. Previous RNA sequencing data utilizing knockdown of heterogeneous nuclear ribonucleoprotein A1 (hnRNP A1) identified enrichment for pathways and changes in RNAs related to nuclear morphology and showed differential expression of key nuclear targets. This suggests that dysfunction of hnRNP A1, which is observed in neurodegenerative diseases, may contribute to abnormalities in nuclear morphology, NPC, and NCT. METHODS: We performed knockdown of hnRNP A1 in Neuro-2A cells, a neuronal cell line, to examine nuclear morphology, NPC, and NCT. RESULTS: First, we examined nuclear morphology using Lamin B, wherein we observed increased nuclear envelope abnormalities in cells with hnRNP A1 knockdown as compared to control. To quantify changes in Lamin B, we designed and validated an automated computer-based model, which quantitatively confirmed our observations. Next, we investigated the impact of hnRNP A1 knockdown on components of the NPC and NCT. In line with the previous literature, we found changes in Nups, including altered distribution and reduced protein expression, as well as disrupted NCT. Finally, we validated our findings in multiple sclerosis (MS) brains, a disease with a significant neurodegenerative component caused by hnRNP A1 dysfunction, where neuronal nuclear envelope alterations were significantly increased as compared to controls. CONCLUSIONS: Together, these data implicate hnRNP A1 as an important contributor to nuclear morphology, Nup expression and distribution, and NCT and suggest that hnRNP A1 dysfunction may lead to defects in these processes in neurodegenerative diseases.

Fouling of Reverse Osmosis (RO) and Nanofiltration (NF) Membranes by Low Molecular Weight Organic Compounds (LMWOCs), Part 1: Fundamentals and Mechanism.

Reverse osmosis (RO) and nanofiltration (NF) are ubiquitous technologies in modern water treatment, finding applications across various sectors. However, the availability of high-quality water suitable for RO/NF feed is diminishing due to droughts caused by global warming, increasing demand, and water pollution. As concerns grow over the depletion of precious freshwater resources, a global movement is gaining momentum to utilize previously overlooked or challenging water sources, collectively known as "marginal water". Fouling is a serious concern when treating marginal water. In RO/NF, biofouling, organic and colloidal fouling, and scaling are particularly problematic. Of these, organic fouling, along with biofouling, has been considered difficult to manage. The major organic foulants studied are natural organic matter (NOM) for surface water and groundwater and effluent organic matter (EfOM) for municipal wastewater reuse. Polymeric substances such as sodium alginate, humic acid, and proteins have been used as model substances of EfOM. Fouling by low molecular weight organic compounds (LMWOCs) such as surfactants, phenolics, and plasticizers is known, but there have been few comprehensive reports. This review aims to shed light on fouling behavior by LMWOCs and its mechanism. LMWOC foulants reported so far are summarized, and the role of LMWOCs is also outlined for other polymeric membranes, e.g., UF, gas separation membranes, etc. Regarding the mechanism of fouling, it is explained that the fouling is caused by the strong interaction between LMWOC and the membrane, which causes the water permeation to be hindered by LMWOCs adsorbed on the membrane surface (surface fouling) and sorbed inside the membrane pores (internal fouling). Adsorption amounts and flow loss caused by the LMWOC fouling were well correlated with the octanol-water partition coefficient (log P). In part 2, countermeasures to solve this problem and applications using the LMWOCs will be outlined.