Polygenic Risk Is Associated With Long-Term Coronary Plaque Progression and High-Risk Plaque.

BACKGROUND: The longitudinal relation between coronary artery disease (CAD) polygenic risk score (PRS) and long-term plaque progression and high-risk plaque (HRP) features is unknown. OBJECTIVES: The goal of this study was to investigate the impact of CAD PRS on long-term coronary plaque progression and HRP. METHODS: Patients underwent CAD PRS measurement and prospective serial coronary computed tomography angiography (CTA) imaging. Coronary CTA scans were analyzed with a previously validated artificial intelligence-based algorithm (atherosclerosis imaging-quantitative computed tomography imaging). The relationship between CAD PRS and change in percent atheroma volume (PAV), percent noncalcified plaque progression, and HRP prevalence was investigated in linear mixed-effect models adjusted for baseline plaque volume and conventional risk factors. RESULTS: A total of 288 subjects (mean age 58 ± 7 years; 60% male) were included in this study with a median scan interval of 10.2 years. At baseline, patients with a high CAD PRS had a more than 5-fold higher PAV than those with a low CAD PRS (10.4% vs 1.9%; P < 0.001). Per 10 years of follow-up, a 1 SD increase in CAD PRS was associated with a 0.69% increase in PAV progression in the multivariable adjusted model. CAD PRS provided additional discriminatory benefit for above-median noncalcified plaque progression during follow-up when added to a model with conventional risk factors (AUC: 0.73 vs 0.69; P = 0.039). Patients with high CAD PRS had an OR of 2.85 (95% CI: 1.14-7.14; P = 0.026) and 6.16 (95% CI: 2.55-14.91; P < 0.001) for having HRP at baseline and follow-up compared with those with low CAD PRS. CONCLUSIONS: Polygenic risk is strongly associated with future long-term plaque progression and HRP in patients suspected of having CAD.

A Randomized Controlled Trial on the Effect of Luseogliflozin on Bone Microarchitecture Evaluated Using HR-pQCT in Elderly Type 2 Diabetes.

INTRODUCTION: Bone fragility is a critical issue in the treatment of elderly people with type 2 diabetes (T2D). In the Canagliflozin Cardiovascular Assessment Study, the subjects with T2D who were treated with canagliflozin showed a significant increase in fracture events compared to a placebo group as early as 12 weeks post-initiation. In addition, it has been unclear whether sodium-glucose co-transporter 2 (SGLT2) inhibitors promote bone fragility. We used high-resolution peripheral quantitative computed tomography (HR-pQCT) to prospectively evaluate the short-term effect of the SGLT2 inhibitor luseogliflozin on bone strength and microarchitecture in elderly people with T2D. METHODS: This was a single-center, randomized, open-label, active-controlled pilot trial for ≥ 60-year-old Japanese individuals with T2D without osteoporosis. A total of 22 subjects (seven women and 15 men) were randomly assigned to a Lusefi group (added luseogliflozin 2.5 mg) or a control group (added metformin 500 mg) and treated for 48 weeks. We used the second-generation HR-pQCT (Xtreme CT II®, Scanco Medical, Brüttisellen, Switzerland) before and 48 weeks after the treatment to evaluate the subjects' bone microarchitecture and estimate their bone strength. RESULTS: Twenty subjects (Lusefi group, n = 9; control group, n = 11) completed the study, with no fracture events. As the primary outcome, the 48-week changes in the bone strength (stiffness and failure load) estimated by micro-finite element analysis were not significantly different between the groups. As the secondary outcome, the changes in all of the cortical/trabecular microarchitectural parameters at the radius and tibia from baseline to 48 weeks were not significantly different between the groups. CONCLUSIONS: In the pilot trial, we observed no negative effect of 48-week luseogliflozin treatment on bone microarchitecture or bone strength in elderly people with T2D. TRIAL REGISTRATION: UMIN-CTR no. 000036202 and jRCT 071180061.

The reduced cortical bone density in vertebral bodies: risk for osteoporotic fractures? Insights from CT analysis.

BACKGROUND: There is a corresponding increase in the prevalence of osteoporosis and related fractures with the aging population on the rise. Furthermore, osteoporotic vertebral compression fractures (OVCF) may contribute to higher patient mortality rates. It is essential to conduct research on risk factors for OVCF and provide a theoretical basis for preventing such fractures. METHODS: We retrospectively recruited patients who had spine CT for OVCF or back pain. Demographic and CT data were collected. Quantitative computed tomography (QCT) software analyzed the CT data, using subcutaneous fat and paraspinal muscles as reference standards for BMD processing. BMD of cortical and cancellous bones in each patient's vertebral body was determined. RESULTS: In this study, 144 patients were divided into non-OVCF (96) and OVCF (48) groups. Non-OVCF patients had higher cortical BMD of 382.5 ± 52.4 to 444.6 ± 70.1 mg/cm3, with T12 having the lowest BMD (p < 0.001, T12 vs. L2). Cancellous BMD ranged from 128.5 ± 58.4 to 140.9 ± 58.9 mg/cm3, with L3 having the lowest BMD. OVCF patients had lower cortical BMD of 365.0 ± 78.9 to 429.3 ± 156.7 mg/cm3, with a further decrease in T12 BMD. Cancellous BMD ranged from 71.68 ± 52.07 to 123.9 ± 126.2 mg/cm3, with L3 still having the lowest BMD. Fractured vertebrae in OVCF patients (T12, L1, and L2) had lower cortical bone density compared to their corresponding vertebrae without fractures (p < 0.05). CONCLUSIONS: T12 had the lowest cortical BMD and L3 had the lowest cancellous BMD in OVCF patients, with T12 also having the highest incidence of osteoporotic fractures. These findings suggest that reduction in cortical BMD has a greater impact on OVCF than reduction in cancellous BMD, along with biomechanical factors.

Trabecular bone microstructure parameters as predictors for chronological age: a systematic review.

Estimating chronological age is crucial in forensic identification. The increased application of medical imaging in age analysis has facilitated the development of new quantitative methods for the macroscopic evaluation of bones. This study aimed to determine the association of age-related changes in the trabecular microstructure with chronological age for age estimation in forensic science through different non-invasive imaging techniques. This systematic review was reported according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. An electronic search was performed with PubMed/MEDLINE, Scopus, and Cochrane databases as well as with a Google Scholar search. Qualitative synthesis was performed using the Anatomical Quality Assessment tool. A detailed literature search yielded 3467 articles. A total of 14 articles were ultimately included in the study. A narrative approach was employed to synthesize the data. Microcomputed tomography, high-resolution peripheral quantitative computed tomography, and cone beam computed tomography have been used for the quantitative estimation of age. These imaging techniques aid in identifying the trabecular bone microarchitectural parameters for chronological age estimation. Age-related changes in trabecular bone included a decrease in the bone volume fraction, trabecular number, and connectivity density and an increase in trabecular separation. This study also revealed that morphometric indices vary with age and anatomical site. This study is registered with the International Prospective Register of Systematic Reviews (PROSPERO) with the registration number CDRD42023391873.

Assessing Thoracic Vertebral Bone Mineral Density (T8-T10) for Osteoporosis Diagnosis During CT Lung Cancer Screening in Older Adults.

Introduction: Osteoporosis diagnosis often utilizes quantitative computed tomography (QCT). This study explored the validity of applying lumbar bone mineral density (LBMD) standards to thoracic vertebrae (T8-T10) for osteoporosis detection during CT lung cancer screenings. This study investigated the utility of thoracic BMD (BMD-T8-T10) for detecting osteoporosis in older persons during CT lung cancer screening. Methods: We studied 701 participants who underwent QCT scans for both LBMD and BMD-T8-T10. Osteoporosis was diagnosed using ACR criteria based on LBMD. We determined BMD-T8-T10 thresholds via a receiver operating characteristic (ROC) curve and translated BMD-T8+T9+T10 to LBMD (TTBMD) using linear regression. Kappa test was used to evaluate the accuracy of BMD-T8-T10 thresholds and TTBMD in diagnosing osteoporosis. Results: Raw BMD-T8-T10 poorly identified osteoporosis (kappa = 0.51). ROC curve analysis identified BMD-T8-T10 thresholds for osteopenia (138 mg/cm3) and osteoporosis (97 mg/cm3) with areas under the curve of 0.97 and 0.99, respectively. We normalized BMD-T8-T10 to TTBMD based on the formula: TTBMD = 0.9 × BMD-T8-T10 - 2.56. These thresholds (kappa = 0.74) and TTBMD performed well in detecting osteoporosis/osteopenia (kappa = 0.74). Conclusion: Both calculating BMD-T8-T10 threshold (138.0 mg/cm3 for osteopenia and 97 mg/cm3 for osteoporosis) and normalizing BMD-T8-T10 to LBMD demonstrated good performance in identifying osteoporosis in older adults during CT lung cancer screening.

Bone turnover markers in the preoperative assessment of bone quality - A prospective investigation of bone microstructure and advanced glycation endproducts in lumbar fusion patients.

INTRODUCTION: Effective tools to evaluate bone quality preoperatively are scarce and the standard method to determine bone quality requires an invasive biopsy. A non-invasive, and preoperatively available method for bone quality assessment would be of clinical value. The purpose of this study is to investigate the associations of bone formation marker, serum bone alkaline phosphatase (BAP), and bone resorption marker, urine collagen cross-linked N-telopeptide (uNTX) to volumetric bone mineral density (vBMD), fluorescent advanced glycation endproducts (fAGEs) and bone microstructure. MATERIALS AND METHODS: A cross-secional analysis using prospective data of patients undergoing lumbar spinal fusion was performed. BAP and uNTX were preoperatively collected. Quantitative computed tomography (QCT) was performed at the lumbar spine (vBMD ≤ 120 mg/cm3 osteopenic/osteoporotic). Bone biopsies from the posterior superior iliac spine were obtained and evaluated with multiphoton fluorescence microscopy for fAGEs and microcomputed tomography (µCT) for bone microarchitecture. Correlations between BAP/uNTX to vBMD, fAGEs and µCT parameters were assessed with Spearman's ρ. Receiver operating characteristic (ROC) analysis evaluated BAP and uNTX as predictors for osteopenia/osteoporosis. Multivariable linear regression models adjusting for age, sex, BMI, race and diabetes mellitus determined associations between BAP/uNTX and fAGEs. RESULTS: 127 prospectively enrolled patients (50.4% female, 62.5 years, BMI 28.7 kg/m2) were analyzed. uNTX (ρ=-0.331,p < 0.005) and BAP (ρ=-0.245,p < 0.025) decreased with cortical fAGEs, and uNTX (ρ=-0.380,p < 0.001) decreased with trabecular fAGEs. BAP and uNTX revealed no significant correlation with vBMD. ROC analysis for BAP and uNTX discriminated osteopenia/osteoporosis with AUC of 0.477 and 0.561, respectively. In the multivariable analysis, uNTX decreased with increasing trabecular fAGEs after adjusting for covariates (ß = 0.923;p = 0.031). CONCLUSION: This study demonstrated an inverse association of bone turnover markers and fAGEs. Both uNTX and BAP could not predict osteopenia/osteoporosis in the spine. uNTX reflects collagen characteristics and might have a complementary role to vBMD, as a non-invasive tool for bone quality assessment in spine surgery.

Micronutrient Status During Military Training and Associations With Musculoskeletal Health, Injury, and Readiness Outcomes.

OBJECTIVE: Micronutrient status, specifically vitamin D and iron, represent modifiable factors for optimizing military readiness. The primary purpose of this investigation was to determine associations between micronutrient deficiency (i.e., iron status and 25-hydroxy-vitamin D [25(OH)D]) and operationally relevant outcomes (i.e., skeletal health, musculoskeletal injury) at baseline and post-10 weeks of arduous military training. METHODS: A total of 227 (177 men, 50 women) Marine Officer Candidates School (OCS) candidates who completed OCS training with complete data sets were included in this analysis. Vitamin D and iron status indicators were collected at two timepoints, pre (baseline) and post OCS. Musculoskeletal outcomes at the mid- and proximal tibial diaphysis were assessed via peripheral quantitative computed tomography. RESULTS: Micronutrient status declined following OCS training in men and women and was associated with musculoskeletal outcomes including greater bone strength (strength strain index) at the mid-diaphysis site in those with optimal status (M = 38.26 mm3, SE = 15.59) versus those without (M = -8.03 mm3, SE = 17.27). In women (p = .037), endosteal circumference was greater in the deficient group (M = 53.26 mm, SE = 1.19) compared with the optimal group (M = 49.47 mm, SE = 1.31) at the proximal diaphysis. In men, greater baseline hepcidin concentrations were associated with an increased likelihood of suffering musculoskeletal injury during training. CONCLUSIONS: Vitamin D and iron status declined over the course of training, suggesting impaired micronutrient status. Differences in musculoskeletal outcomes by micronutrient group suggests optimal vitamin D and ferritin concentrations may exert beneficial effects on bone fatigability and fracture reduction during military training.

Causal relationships between height and weight with distal tibia microarchitecture and geometry in adult female twin pairs.

Higher stature and lower weight are associated with increased risk of fracture. However, the pathophysiology for the associations of height and weight with bone microarchitecture and geometry is unclear. We examined whether these associations were consistent with causation and/or with shared familial factors. In this cross-sectional study of 566 female twins aged 26-76 yr, a regression analysis for twin data, Inference about Causation by Examination of FAmilial CONfounding (ICE FALCON), was used for testing causation. The bone microarchitecture and geometry of the distal tibia was assessed using HR-pQCT and the StrAx1.0 software. Higher stature was associated with larger total bone cross-sectional area (CSA), lower total bone volumetric bone mineral density (vBMD), larger cortical CSA, thinner cortices, higher porosity of the total cortex, compact cortex, outer and inner transitional zone (TZ), lower cortical vBMD, and larger medullary CSA (regression coefficients (ß) ranging from -.37 to .60, all p<.05). Using ICE FALCON, the cross-pair cross-trait associations attenuated toward zero after adjusting for the within-individual association (absolute values of ß ranging from .05 to .31, all p<.001). Higher weight was associated with higher total bone vBMD, larger cortical CSA and thicker cortices, lower porosity of the total cortex and inner TZ, and higher cortical vBMD (ß ranging from -.23 to .34, all p<.001), and thinner trabeculae, higher trabecular number, lower trabecular separation, and higher trabecular vBMD (ß ranging from -.31 to .39, all p<.05). Only cortical CSA attenuated toward zero after adjusting for the within-individual association between weight and bone microarchitecture (ß = .042, p=.046). Higher stature was associated with a weaker cortical, not trabecular bone traits, whereas higher weight was associated with stronger cortical and trabecular bone traits. The results were consistent with height having a causal effect on weaker cortical bone structure, whereas weight had a casual effect on the larger cortical CSA.

Risk Factors for Bone Microarchitecture Impairments in Older Men with Type 2 Diabetes - The MrOS Study.

CONTEXT: Impaired bone microarchitecture, assessed by high-resolution peripheral quantitative computed tomography (HR-pQCT), may contribute to bone fragility in type 2 diabetes (T2DM) but data on men are lacking. OBJECTIVE: To investigate the association between T2DM and HR-pQCT parameters in older men. METHODS: HR-pQCT scans were acquired on 1794 participants in the Osteoporotic Fractures in Men (MrOS) study. T2DM was ascertained by self-report or medication use. Linear regression models, adjusted for age, race, BMI, limb length, clinic site, and oral corticosteroid use, were used to compare HR-pQCT parameters by diabetes status. RESULTS: Among 1777 men, 290 had T2DM (mean age 84.4 years). T2DM men had smaller total cross-sectional area (Tt.AR) at the distal tibia (p=0.028) and diaphyseal tibia (p=0.025), and smaller cortical area at the distal (p= 0.009) and diaphyseal tibia (p= 0.023). Trabecular indices and cortical porosity were similar between T2DM and non-T2DM. Among men with T2DM, in a model including HbA1c, diabetes duration, and insulin use, diabetes duration ≥ 10 years, compared with <10 years, was significantly associated with higher cortical porosity but with higher trabecular thickness at the distal radius. Insulin use was significantly associated with lower cortical area and thickness at the distal radius and diaphyseal tibia and lower failure load at all three scan sites. Lower cortical area, cortical thickness, total BMD, cortical BMD, and failure load of the distal sites were associated with increased risk of incident non-vertebral fracture in T2DM. CONCLUSIONS: Older men with T2DM have smaller bone size compared to non-T2DM, which may contribute to diabetic skeletal fragility. Longer diabetes duration was associated with higher cortical porosity and insulin use with cortical bone deficits and lower failure load.

Misinterpretations about CT numbers, material decomposition, and elemental quantification.

BACKGROUND: Quantitative CT imaging, particularly iodine and calcium quantification, is an important CT-based biomarker. PURPOSE: This study quantifies sources of errors in quantitative CT imaging in both single-energy and spectral CT. MATERIALS AND METHODS: This work examines the theoretical relationship between CT numbers, linear attenuation coefficient, and material quantification. We derive four understandings: (1) CT numbers are not proportional with element mass in vivo, (2) CT numbers are proportional with element mass only when contained in a voxel of pure water, (3) iodine-water material decomposition is never accurate in vivo, and (4) for error-free material decomposition a voxel must only consist of the basis decomposition vectors. Misinterpretation-based errors are calculated using the National Institute of Standards and Technology (NIST) XCOM database for: tissue chemical compositions, clinical concentrations of hydroxyapatite (HAP), and iodine. Quantification errors are also demonstrated experimentally using phantoms. RESULTS: In single-energy CT, misinterpretation-induced errors for HAP density in adipose, muscle, lung, soft tissue, and blood ranged from 0-132%, i.e., a mass error of 0-749 mg/cm3. In spectral CT, errors with iodine in the same tissues resulted in a range of < 0.1-33% error, resulting in a mass error of < 0.1-1.2 mg/mL. CONCLUSION: Our work demonstrates material quantification is fundamentally limited when measured in vivo due to measurement conditions differing from assumed and the errors are at or above detection limits for bone mineral density (BMD) and spectral iodine quantification. To define CT-derived biomarkers, the errors we demonstrate should either be avoided or built into uncertainty bounds. CLINICAL RELEVANCE STATEMENT: Improving error bounds in quantitative CT biomarkers, specifically in iodine and BMD quantification, could lead to improvements in clinical care aspects based on quantitative CT. KEY POINTS: CT numbers are only proportional with element mass only when contained in a voxel of pure water, therefore iodine-water material decomposition is never accurate in vivo. Misinterpretation-induced errors ranged from 0-132% for HAP density and < 0.1-33% in spectral CT with iodine. For error-free material decomposition, a voxel must only consist of the basis decomposition vectors.

Characterization of bone disease in cystic fibrosis.

With the increased life expectancy of people with cystic fibrosis (CF), clinical attention has focused on prevention and treatment of non-pulmonary comorbidities. CF-related bone disease (CFBD) is a common complication and leads to increased fracture rates. Dual energy X-ray absorptiometry (DXA) is the recommended and gold standard technique to identify and monitor bone health. However, DXA has limitations because of its two-dimensional nature. Complementary tools to DXA are available, such as trabecular bone score (TBS) and vertebral fracture assessment (VFA). Quantitative computed tomography (QCT), magnetic resonance imaging (MRI) and quantitative ultrasound (QUS) may also be useful.

Chemotherapy effects on bone mineral density and microstructure in women with breast cancer.

INTRODUCTION: Chemotherapy involves the administration of steroids to prevent nausea and vomiting; however, its effect on bone microstructure remains unknown. This study aimed to evaluate the changes in bone mineral density (BMD) and bone microstructure associated with chemotherapy using high-resolution peripheral quantitative computed tomography (HR-pQCT) in women with early breast cancer. MATERIALS AND METHODS: This prospective single-arm observational study included non-osteoporotic, postmenopausal women with breast cancer. The patients underwent dual-energy X-ray absorptiometry (DXA), HR-pQCT, and tartrate-resistant acid phosphatase-5b (TRACP-5b) or procollagen type-I N-terminal propeptide (P1NP) measurements at baseline, end of chemotherapy, and 6 months after chemotherapy. The primary endpoint was the change in total volumetric BMD at the distal tibia and radius. RESULTS: Eighteen women were included in the study (median age: 57 years; range: 55-62 years). At 6 months after chemotherapy, HR-pQCT indicated a significant decrease in total volumetric BMD (median: distal tibia -4.5%, p < 0.01; distal radius -2.3%, p < 0.01), cortical volumetric BMD (-1.9%, p < 0.01; -0.8%, p = 0.07, respectively), and trabecular volumetric BMD (-1.1%, p = 0.09; -3.0%, p < 0.01, respectively). The DXA BMD also showed a significant decrease in the lumbar spine (median: -4.5%, p < 0.01), total hip (-5.5%, p < 0.01), and femoral neck (-4.2%, p < 0.01). TRACP-5b and P1NP levels were significantly increased at the end of chemotherapy compared to baseline. CONCLUSION: Postmenopausal women undergoing chemotherapy for early breast cancer experienced significant BMD deterioration in weight-bearing bone, which was further reduced 6 months after chemotherapy.

Computed tomography (CT) quantitative assessment of single lobe emphysema correlates with chronic obstructive pulmonary disease (COPD) severity: a cross-sectional study with retrospective data collection.

Background: In the past, many researchers have studied the correlation between quantitative parameters of computed tomography (CT) and parameters of pulmonary function test (PFT) in patients with chronic obstructive pulmonary disease (COPD) with good results. Most of these studies have focused on the whole-lung level. In this study, we analyzed the biphasic CT lung volume parameters and the percentage of emphysema volume in different lobes of the lungs of patients with different grades of COPD and assessed their relationship with different lung function indices. Methods: We retrospectively collected patients who underwent PFTs at The First Affiliated Hospital of Guangzhou Medical University from 1 July 2019 to 27 January 2020, and underwent chest respiratory dual-phase CT scans within 1 week, including 112 non-COPD patients and 297 COPD patients. We quantified the biphasic CT lung volume parameters and the percentage of emphysema volume in different lobes using a pulmonary image analysis tool. One-way analysis of variance (ANOVA) and Kruskal-Wallis H method were used to compare the quantitative CT parameters of each lung lobe in different groups. The correlation between quantitative CT parameters of different lung lobes and lung function indices was assessed using multiple linear regression. Results: Among the 3 biphasic CT lung volume parameters, only volume change/inspiratory lung volume (∆LV/LVin) in the non-COPD control, mildly to moderately severe, and severe to extremely severe groups had statistical differences in each lobe level (all P<0.05). Correlation was significant between LVin and different lung function indices and between low attenuation areas percent below the threshold of -950 in the inspiratory phase [low attenuation area below -950 in the inspiratory phase (%LAA-950in)] and lung function indices in the left lower lobe (all P<0.05). There was statistically significant correlation between expiratory lung volume and ∆LV/LVin and lung function indices in the right lower lung (all P≤0.001). In the remaining lobes, LVin, expiratory lung volume, ∆LV/LVin, and %LAA-950in correlated with only some of the lung function indices. Conclusions: The percentage of emphysema volume did not differ between lobes in the non-COPD control and severe to extremely severe COPD populations. LVin and %LAA-950in in the left upper lobe, expiratory lung volume and ∆LV/LVin in the right lower lobe were more reflective of the changes in lung function indices of the patients, whereas the correlation of the 3 biphasic CT lung volume parameters and the percentage of emphysema volume in the upper lobes of both lungs and the right middle lung with lung function indices was unclear.

High-Resolution Peripheral Quantitative Computed Tomography in Rheumatic Diseases: A New Option for Knee Osteoarthritis.

High-resolution peripheral quantitative computed tomography (HR-pQCT) provides a new opportunity for the noninvasive measurement of bone microarchitecture in patient research of rheumatic disease in joints of the extremities. Rheumatoid arthritis of the hand and osteoarthritis of the knee are highly prevalent and there are no cures, so an improved understanding of the etiology of these diseases, particularly when combining HR-pQCT with other imaging modalities, is important to develop new disease management strategies. Analysis of HR-pQCT data is challenging due to the large size of the datasets, but the field continues to rapidly develop, and there is excellent opportunity to integrate sophisticated analyses for this novel research tool.

The diagnostic value of MRI-based vertebral bone quality score for osteoporosis or osteopenia in patients undergoing lumbar surgery: a meta-analysis.

The importance of osteoporosis assessment before lumbar surgery is well recognized. The MRI-based Vertebral Bone Quality (VBQ) score is introduced to evaluate bone quality; however, its diagnostic value has not been well documented. The purpose of this meta-analysis was to summarize the diagnostic value of the VBQ score for osteoporosis or osteopenia in patients undergoing lumbar surgery. We comprehensively searched electronic databases for studies exploring the diagnostic accuracy of the VBQ score for osteoporosis/osteopenia in patients with lumbar disease following the PRISMA guidelines. The quality of the included studies was assessed. The VBQ scores were compared between the groups, and the pooled sensitivity, specificity, and summary receiver operating characteristic (ROC) were calculated. Publication bias was assessed, and meta-regression was conducted. We included 17 studies with a total of 2815 patients, with a mean age of 66.4 years and a percentage of females of 72.5%. According to the QUADAS-2 tool, the quality of the included studies was relatively high. The results showed a significantly higher VBQ score in the osteoporosis/osteopenia group compared with the control group. According to the mean VBQ cutoff value of 3.02 ± 0.38 for the diagnosis of osteoporosis, the pooled sensitivity and specificity were 0.76 and 0.74, respectively, and the AUC was 0.81. According to the mean VBQ cutoff value of 2.31 ± 0.18 for the diagnosis of osteopenia, the pooled sensitivity and specificity were 0.78 and 0.58, respectively, and the AUC was 0.76. The MRI-based VBQ score could provide useful information for identifying patients with low bone mass who need further evaluation. Future prospective studies are still needed to evaluate the complementary role of the VBQ score.

Effects of daily teriparatide, weekly high-dose teriparatide, or bisphosphonate on cortical and trabecular bone of vertebra and proximal femur in postmenopausal women with fragility fracture: Sub-analysis by quantitative computed tomography from the TERABIT study.

PURPOSE: The effects of daily teriparatide (D-PTH, 20 µg/day), weekly high-dose teriparatide (W-PTH, 56.5 µg/week), or bisphosphonate (BP) on the vertebra and proximal femur were investigated using quantitative computed tomography (QCT). METHODS: A total of 131 postmenopausal women with a history of fragility fractures were randomized to receive D-PTH, W-PTH, or bisphosphonate (oral alendronate or risedronate). QCT were evaluated at baseline and after 18 months of treatment. RESULTS: A total of 86 participants were evaluated by QCT (Spine: D-PTH: 25, W-PTH: 21, BP: 29. Hip: PTH: 22, W-PTH: 21, BP: 32. Dropout rate: 30.5 %). QCT of the vertebra showed that D-PTH, W-PTH, and BP increased total vBMD (+34.8 %, +18.2 %, +11.1 %), trabecular vBMD (+50.8 %, +20.8 %, +12.2 %), and marginal vBMD (+20.0 %, +14.0 %, +11.5 %). The increase in trabecular vBMD was greater in the D-PTH group than in the W-PTH and BP groups. QCT of the proximal femur showed that D-PTH, W-PTH, and BP increased total vBMD (+2.8 %, +3.6 %, +3.2 %) and trabecular vBMD (+7.7 %, +5.1 %, +3.4 %), while only W-PTH and BP significantly increased cortical vBMD (-0.1 %, +1.5 %, +1.6 %). Although there was no significant increase in cortical vBMD in the D-PTH group, cortical bone volume (BV) increased in all three treatment groups (+2.1 %, +3.6 %, +3.1 %). CONCLUSIONS: D-PTH had a strong effect on trabecular bone of vertebra. Although D-PTH did not increase cortical BMD of proximal femur, it increased cortical BV. W-PTH had a moderate effect on trabecular bone of vertebra, while it increased both cortical BMD and BV of proximal femur. Although BP had a limited effect on trabecular bone of vertebra compared to teriparatide, it increased both cortical BMD and BV of proximal femur.

Bone and muscle differences in children and adolescents with type 1 diabetes: The mediating role of physical activity.

Children with type 1 diabetes (T1D) experience an increased risk of fracture, which may be related to altered bone development. We aimed to assess differences in bone, muscle and physical activity (PA), and explore if better muscle and PA measures would mitigate bone differences between children and adolescents with T1D and typically developing peers (TDP). We matched 56 children and adolescents with T1D (mean age 11.9 yrs) and 56 TDP (11.5 yrs) by sex and maturity from 171 participants with T1D and 66 TDP (6-17 yrs). We assessed the distal radius and tibia with high-resolution peripheral quantitative computed tomography (HR-pQCT), and the radius and tibia shaft bone and muscle with pQCT. We also measured muscle function from force-related measures in neuromuscular performance tests (push-up, grip test, countermovement and long jump). We compared PA based on questionnaire scores and accelerometers between groups. Bone, muscle, and neuromuscular performance measures were compared using MANOVA. We used mediation to explore the role of PA and muscle in bone differences. Children and adolescents with T1D had 6-10 % lower trabecular density, bone volume fraction, thickness and number at both distal radius and tibia, and 11 % higher trabecular separation at the distal radius than TDP. They also had 3-16 % higher cortical and tissue mineral density, and cortical thickness at the distal radius, 5-7 % higher cortical density and 1-3 % higher muscle density at both shaft sites compared to TDP. PA mediated the between-group difference in trabecular number (indirect effect -0.04) at the distal radius. Children and adolescents with T1D had lower trabecular bone density and deficits in trabecular micro-architecture, but higher cortical bone density and thickness at the radius and tibia compared to TDP. They engaged in less PA but had comparable muscle measures to those of TDP. PA participation may assist in mitigating deficit in trabecular number observed in children and adolescents with T1D.

Clinical use of quantitative computed tomography to evaluate the effect of less paraspinal muscle damage on bone mineral density changes after lumbar interbody fusion.

STUDY DESIGN: A retrospective cohort study. PURPOSE: This study aimed to assess the reliability of quantitative computed tomography (QCT) in measuring bone mineral density (BMD) of instrumented vertebrae and investigate the effect of less paraspinal muscle damage on BMD changes after lumbar interbody fusion. OVERVIEW OF LITERATURE: Patients always experience a decrease in vertebral BMD after lumbar interbody fusion. However, to the best of our knowledge, no study has analyzed the effect of paraspinal muscles on BMD changes. METHODS: This retrospective analysis included a total of 155 patients who underwent single-level lumbar fusion, with 81 patients in the traditional group and 74 patients in the Wiltse group (less paraspinal muscle damage). QCT was used to measure the volumetric BMD (vBMD), Hounsfield unit value, and cross-sectional area of the paraspinal muscles at the upper instrumented vertebrae (UIV), vertebrae one segment above the UIV (UIV+1), and the vertebrae one segment above the UIV+1 (UIV+2). Statistical analyses were performed. RESULTS: No significant differences in general data were observed between the two groups (p>0.05). Strong correlations were noted between the preoperative and 1-week postoperative vBMD of each segment (p<0.01), with no significant difference between the two time points in both groups (p>0.05). Vertebral BMD loss was significantly higher in UIV+1 and UIV+2 in the traditional group than in the Wiltse group (-13.6%±19.1% vs. -4.2%±16.5%, -10.8%±20.3% vs. -0.9%±37.0%; p<0.05). However, no statistically significant difference was observed in the percent vBMD changes in the UIV segment between the two groups (37.7%±70.1% vs. 36.1%±78.7%, p>0.05). CONCLUSIONS: QCT can reliably determine BMD in the instrumented spine after lumbar interbody fusion. With QCT, we found that reducing paraspinal muscle destruction through the Wiltse approach during surgery can help preserve the adjacent vertebral BMD; however, it does not help increase the BMD in the instrumented vertebrae.

Optimal scanning parameters of lumbar bone density measured by fast kilovoltage-switching dual-energy computed tomography (DECT).

Background: The technological innovation of fast kilovoltage (KV)-switching dual-energy computed tomography (DECT) has enabled the accurate measurement of vertebral bone density; however, it does not account for the effects of abdominal fat and ribs on the vertebral body. In our study, a European spine phantom (ESP) was used to establish an abdominal phantom for normal weight and obese people, and to explore the best scanning parameters for DECT to measure the bone mineral density (BMD) of the human lumbar spine. Methods: Revolution CT was used to conduct energy spectrum scanning for each body mode. A total of 20 sets of energy spectrum scans was conducted and each set of conditions was scanned 10 times. The data conformed to a normal distribution, and the differences between the measured and actual values of ESP L1-3 vertebrae were compared using a one-sample t-test, and quantitative data were described by x ¯ ± s . A P value <0.05 was considered statistically significant. Relative error (RE) and root mean square error (RMSE) of BMD measurements were calculated for different scanning conditions in normal and obese populations. Results: When simulating the upper abdominal condition (L1-2 level, fat area 140 cm2, with rib influence) in a normal weight population, there was no statistical difference (P>0.05) in BMD measurements for each vertebra at 0.8 s/rotation (rot) with different tube currents, the smallest RE at 0.8 s/rot, 190 mA condition, and the smallest RMSE for L1 and 2 vertebral BMD measurements at 190 mA; when simulating the abdominal condition at the L4 level in a normal weight population (fat area of 240 cm2, no rib influence), there were no statistical differences between the measurements at 0.8 s/rot, 190 and 275 mA conditions (P>0.05), and the RE and RMSE in the 190 mA condition was smaller than that in the 275 mA condition. Simulating the upper abdominal condition in the obese population (L1-2 level, fat area 340 cm2, with rib influence), there were no statistical difference between the measurements in the 0.8 s/rot, 315 and 355 mA conditions (P>0.05), the RE and RMSE in the 315 mA condition was less than those in the 355 mA; simulated obese abdominal condition at the L4 level in the population (fat area 450 cm2, no rib influence) resulted in 0.8 s/rot, no statistical difference in measurements between 315 mA (P>0.05), RE in 315 mA conditions were L1: 3.75%, L2: -1.06%, L3: 0.42%, and the RMSE under 315 mA condition were L1: 2.13, L2: 1.21, L3: 1.66. Conclusions: When using Revolution CT to measure lumbar spine bone density, 0.8 s/rot at 190 mA may be the best scanning parameter for a normal weight population, and 0.8 s/rot at 315 mA may be the best scanning parameter for an obese population.

Value of different preoperative bone evaluation methods in predicting intraoperative screw insertion torque-a prospective clinical comparative trial.

BACKGROUND CONTEXT: Establishing good screw-bone structural stability is conducive to reducing the risk of postoperative screw loosening. Screw insertion torque is an objective index for evaluating screw-bone structural stability. Therefore, accurate prediction of screw insertion torque can improve the preoperative evaluation of patients, optimize the surgical plan, and improve the surgical effect. At present, the correlation between different bone assessment methods and screw insertion torque is unclear. PURPOSE: The aim of this study was to evaluate the correlation between different bone assessment methods and screw insertion torque and to optimize the predictive performance of screw insertion torque through mathematical modeling combined with different radiology methods. DESIGN: Prospective cross-sectional study. PATIENT SAMPLES: 77 patients with preoperatively available DXA, CT and MRI data who underwent spinal fixation surgeries between October 2022 and September 2023 and 357 sets of screw data were included in this analysis. OUTCOME MEASURES: Spinal, vertebrae-specific and screw trajectory's BMD were measured preoperatively by different imaging modalities. Intraoperative screw insertion torque was measured using an electronic torque wrench. METHODS: Pearson linear correlation, scatter plots and univariate linear regression were used to evaluate the correlation between different bone evaluation methods and screw insertion torque. Different bone evaluation methods were fitted into the prediction model of screw torque and the related equations were obtained. RESULTS: Screw insertion torque had the strongest positive correlation with the volumetric bone mineral density (vBMD) of the screw trajectory (Pedicle screw insertion torque (PSIT): R = 0.618, p<.001; Terminal screw insertion torque (TSIT): R = 0.735, p<.001). A weak negative correlation was found between the screw insertion torque and level specific vertebral bone quality (VBQ) (PSIT: R = -0.178, p=.001; TSIT: R = -0.147, p=.006). We also found that the PSIT was strongly correlated with the TSIT (R = 0.812, p<.001). CONCLUSIONS: Compared to other bone quality assessment methods, screw trajectory vBMD may be better predict the magnitude of screw insertion torque. In addition, we further optimized preoperative assessments by constructing a mathematical model to better predict screw insertion torque. In conclusion, clinicians should select appropriate preoperative bone quality assessment methods, identify potential low-torque patients, optimize surgical plans, and ultimately improve screw insertion accuracy and reduce postoperative screw loosening rate.