Rapid Synthesis of Functions-Integrated Hydrogel as a Self-Powered Wound Dressing for Real-Time Drug Release and Health Monitoring.

A bio-hydrogel is prepared via a low-cost and time-saving strategy and is studied as a self-powered wound dressing for precision medicine and health monitoring. Promoted by a dual self-catalytic pair composed of Fe3+ and catechol, gelation time is dramatically accelerated to 15 s and the hydrogel can be freely modeled at -18 °C without losing flexibility. As smart wound dressing, the required properties such as self-healing, self-adhesion, antibacterial, and sensing stability, are integrated into one hydrogel. TA@CNC offers abundant hydrogen bond and metal-ligand coordination which facilitate the hydrogel with a self-healing efficiency of 91.6%. Owing to the catechol in TA@CNC, hydrogel can adhere to multiple substrates including skin, and show good antibacterial activity. Inspired by a fruit battery, a self-powered wound dressing is fabricated, which exhibits excellent correlation and efficiency in real-time monitoring of body activity and drug release. In vivo experiments prove that efficient drug release of hydrogel dressing significantly accelerate wound healing. Additionally, the dressing exhibits excellent biocompatibility and has no negative impacts on organs. Herein, a smart wound dressing that is different from the traditional way is proposed. As a self-powered device, it can be integrated with wireless devices and is expected to participate in promising applications.

Injectable, stable, and biodegradable hydrogel with platelet-rich plasma induced by l-serine and sodium alginate for effective treatment of intrauterine adhesions.

The combination of pharmacological and physical barrier therapy is a highly promising strategy for treating intrauterine adhesions (IUAs), but there lacks a suitable scaffold that integrates good injectability, proper mechanical stability and degradability, excellent biocompatibility, and non-toxic, non-rejection therapeutic agents. To address this, a novel injectable, degradable hydrogel composed of poly(ethylene glycol) diacrylate (PEGDA), sodium alginate (SA), and l-serine, and loaded with platelet-rich plasma (PRP) (referred to as PSL-PRP) is developed for treating IUAs. l-Serine induces rapid gelation within 1 min and enhances the mechanical properties of the hydrogel, while degradable SA provides the hydrogel with strength, toughness, and appropriate degradation capabilities. As a result, the hydrogel exhibits an excellent scaffold for sustained release of growth factors in PRP and serves as an effective physical barrier. In vivo testing using a rat model of IUAs demonstrates that in situ injection of the PSL-PRP hydrogel significantly reduces fibrosis and promotes endometrial regeneration, ultimately leading to fertility restoration. The combined advantages make the PSL-PRP hydrogel very promising in IUAs therapy and in preventing adhesions in other internal tissue wounds.

Silk fibroin-based inks for in situ 3D printing using a double crosslinking process.

The shortage of tissues and organs for transplantation is an urgent clinical concern. In situ 3D printing is an advanced 3D printing technique aimed at printing the new tissue or organ directly in the patient. The ink for this process is central to the outcomes, and must meet specific requirements such as rapid gelation, shape integrity, stability over time, and adhesion to surrounding healthy tissues. Among natural materials, silk fibroin exhibits fascinating properties that have made it widely studied in tissue engineering and regenerative medicine. However, further improvements in silk fibroin inks are needed to match the requirements for in situ 3D printing. In the present study, silk fibroin-based inks were developed for in situ applications by exploiting covalent crosslinking process consisting of a pre-photo-crosslinking prior to printing and in situ enzymatic crosslinking. Two different silk fibroin molecular weights were characterized and the synergistic effect of the covalent bonds with shear forces enhanced the shift in silk secondary structure toward ß-sheets, thus, rapid stabilization. These hydrogels exhibited good mechanical properties, stability over time, and resistance to enzymatic degradation over 14 days, with no significant changes over time in their secondary structure and swelling behavior. Additionally, adhesion to tissues in vitro was demonstrated.

In Situ Rapid-Formation Sprayable Hydrogels for Challenging Tissue Injury Management.

Rapid-acting, convenient, and broadly applicable medical materials are in high demand for the treatment of extensive and intricate tissue injuries in extremely medical scarcity environment, such as battlefields, wilderness, and traffic accidents. Conventional biomaterials fail to meet all the high criteria simultaneously for emergency management. Here, a multifunctional hydrogel system capable of rapid gelation and in situ spraying, addressing clinical challenges related to hemostasis, barrier establishment, support, and subsequent therapeutic treatment of irregular, complex, and urgent injured tissues, is designed. This hydrogel can be fast formed in less than 0.5 s under ultraviolet initiation. The precursor maintains an impressively low viscosity of 0.018 Pa s, while the hydrogel demonstrates a storage modulus of 0.65 MPa, achieving the delicate balance between sprayable fluidity and the mechanical strength requirements in practice, allowing flexible customization of the hydrogel system for differentiated handling and treatment of various tissues. Notably, the interactions between the component of this hydrogel and the cell surface protein confer upon its inherently bioactive functionalities such as osteogenesis, anti-inflammation, and angiogenesis. This research endeavors to provide new insights and designs into emergency management and complex tissue injuries treatment.

Superfast Gelation of Spider Silk-Based Artificial Silk Protein.

Spider silk proteins (spidroins) have garnered attention in biomaterials research due to their ability to self-assemble into hydrogels. However, reported spidroin hydrogels require high protein concentration and prolonged gelation time. Our study engineered an artificial spidroin that exhibits unprecedented rapid self-assembly into hydrogels at physiologically relevant conditions, achieving gelation at a low concentration of 6 mg/mL at 37 °C without external additives. Remarkably, at a 30 mg/mL concentration, our engineered protein forms hydrogels within 30 s, a feature we termed "superfast gelation". This rapid formation is modulated by ions, pH, and temperature, offering versatility in biomedical applications. The hydrogel's capacity to encapsulate proteins and support E. coli growth while inducing RFP expression provides a novel platform for drug delivery and bioengineering applications. Our findings introduce a superfast, highly adaptable, and cytocompatible hydrogel that self-assembles under mild conditions, underscoring the practical implication of rapid gelation in biomedical research and clinical applications.

Versatile MXene Gels Assisted by Brief and Low-Strength Centrifugation.

Due to the mutual repulsion between their hydrophilic surface terminations and the high surface energy facilitating their random restacking, 2D MXene nanosheets usually cannot self-assemble into 3D macroscopic gels with various applications in the absence of proper linking agents. In this work, a rapid spontaneous gelation of Ti3C2Tx MXene with a very low dispersion concentration of 0.5 mg mL-1 into multifunctional architectures under moderate centrifugation is illustrated. The as-prepared MXene gels exhibit reconfigurable internal structures and tunable rheological, tribological, electrochemical, infrared-emissive and photothermal-conversion properties based on the pH-induced changes in the surface chemistry of Ti3C2Tx nanosheets. By adopting a gel with optimized pH value, high lubrication, exceptional specific capacitances (~ 635 and ~ 408 F g-1 at 5 and 100 mV s-1, respectively), long-term capacitance retention (~ 96.7% after 10,000 cycles) and high-precision screen- or extrusion-printing into different high-resolution anticounterfeiting patterns can be achieved, thus displaying extensive potential applications in the fields of semi-solid lubrication, controllable devices, supercapacitors, information encryption and infrared camouflaging.

Fast gelling, high performance MXene hydrogels for wearable sensors.

Hydrogel-based functional materials had attracted great attention in the fields of artificial intelligence, soft robotics, and motion monitoring. However, the gelation of hydrogels induced by free radical polymerization typically required heating, light exposure, and other conditions, limiting their practical applications and development in real-life scenarios. In this study, a simple and direct method was proposed to achieve rapid gelation at room temperature by incorporating reductive MXene sheets in conjunction with metal ions into the chitosan network and inducing the formation of a polyacrylamide network in an extremely short time (10 s). This resulted in a dual-network MXene-crosslinked conductive hydrogel composite that exhibited exceptional stretchability (1350 %), remarkably low dissipated energy (0.40 kJ m-3 at 100 % strain), high sensitivity (GF = 2.86 at 300-500 % strain), and strong adhesion to various substrate surfaces. The study demonstrated potential applications in the reliable detection of various motions, including repetitive fine movements and large-scale human body motions. This work provided a feasible platform for developing integrated wearable health-monitoring electronic systems.

Ultra-Rapid and Specific Gelation of Collagen Molecules for Transparent and Tough Gels by Transition Metal Complexation.

Collagen is the most abundant protein in the human body and one of the main components of stromal tissues in tumors which have a high elastic modulus of over 50 kPa. Although collagen has been widely used as a cell culture scaffold for cancer cells, there have been limitations when attempting to fabricate a tough collagen gel with cells like a cancer stroma. Here, rapid gelation of a collagen solution within a few minutes by transition metal complexation is demonstrated. Type I collagen solution at neutral pH shows rapid gelation with a transparency of 81% and a high modulus of 1,781 kPa by mixing with K2 PtCl4 solution within 3 min. Other transition metal ions also show the same rapid gelation, but not basic metal ions. Interestingly, although type I to IV collagen molecules show rapid gelation, other extracellular matrices  do not exhibit this phenomenon. Live imaging of colon cancer organoids in 3D culture indicates a collective migration property with modulating high elastic modulus, suggesting activation for metastasis progress. This technology will be useful as a new class of 3D culture for cells and organoids due to its facility for deep-live observation and mechanical stiffness adjustment.

Rapid gelation of oxidized hyaluronic acid and succinyl chitosan for integration with insulin-loaded micelles and epidermal growth factor on diabetic wound healing.

In this work, poly(ethylene glycol)-b-poly[3-acrylamidophenylboronic acid-co-styrene] (PEG-b-P(PBA-co-St) has been firstly synthesized for loading of insulin to form insulin-loaded micelles. Insulin-loaded micelles (ILM) and epidermal growth factor (EGF) are further embedded into the composite hydrogels that can be rapidly gelled by mixing of oxidized hyaluronic acid (OHA) and succinyl chitosan (SCS). Then, the morphology, rheology, degradation, swelling and cytotoxicity properties of the as-prepared composite hydrogels are further investigated to evaluate their physical properties and biocompatibility of as the wound dressing. The as-prepared composite hydrogels show the excellent cell compatibility and low toxicity. To evaluate the wound healing ability of as-prepared composite hydrogels, the tests of wound healing in vivo are conducted on streptozotocin-induced rat models. And the as-prepared composite hydrogels with ILM and EGF show an excellent wound healing performance for promotion of fibroblast proliferation and tissue internal structure integrity, as well as the deposition of collagen and myofibrils. These results suggest that the as-prepared composite hydrogels with loading of ILM and EGF could be a promising candidate for wound healing applications.

Green and Rapid Synthesis of Durable and Super-Oil (under Water) and Water (in Air) Repellent Interfaces.

In this letter, a single polymer is rapidly and covalently transformed into a chemically reactive and functional bulk polymeric coatings through a catalyst-free mutual chemical reaction between acrylates and amine groups at ambient condition-in the absence of any external reaction solvent, which is unprecedented in the literature. This facile and green chemical approach provided a common basis for achieving two distinct biomimicked wettabilities-that are superhydrophobicity (lotus-leaf mimicked) in air and superoleophobicity (fish-scale inspired) under water. The essential chemistry that conferred bioinspired wettability was optimized in the hierarchically featured polymeric material by postcovalent modulation of chemically reactive polymeric material with primary-amine-containing small moleculess, glucamine and octadecylamine. The inherently sticky and "chemically reactive" polymeric material having appropriate hierarchical topography is highly capable of providing substrate-independent (irrespective of chemical compositions and mechanical strength of the substrates) stable coatings with robust bioinspired (i.e., lotus leaf and fish scale) wettability.

A Water-Based Chitosan-Maleimide Precursor for Bioconjugation: An Example of a Rapid Pathway for an In Situ Injectable Adhesive Gel.

Chitosan conjugated with maleimide (CS-Mal) as a potential precursor for bioconjugation and the example of the application in in situ injectable adhesive gel is proposed. The homogeneous reaction in water/dimethyl sulfoxide (DMSO) (1:1) followed by dialysis in HCl (10 × 10-3 m) is a good condition to obtain CS-Mal. When SH-PEG-SH is applied as the crosslinker, the gel can be obtained in a few seconds without any by-products at room temperature. The gel formation and properties are controllable by simply varying the concentration and the molecular weight of CS, the Mal substitution degree, and the temperature. The gel is injectable and shows adhesive property for soft tissue. Moreover, the gel shows not only biocompatibility to SAOS2 cells but also antimicrobial activity against both gram-negative and gram-positive bacteria. CS-Mal is useful not only for bioconjugation of CS but also for development of biomaterials.