Outcomes of Corrective, Concentric (C2) Glenoid Reaming combined with Pyrocarbon Hemiarthroplasty for B2, B3 Glenoid Arthritis.

BACKGROUND: Posterior humeral subluxation (PHS) in B2/B3 glenoid is a cause of asymmetric long-term stress on the glenoid and the potential reason for glenoid loosening in anatomic total shoulder arthroplasty (ATSA) and painful glenoid erosion in hemiarthroplasty with metallic heads (HA-Metal). We hypothesized that corrective and concentric reaming (CCR) of the glenoid associated with pyrocarbon hemiarthroplasty (HA-PYC) could improve the centering of the humeral head and decrease the risk of persistent painful glenoid erosion in young/active patients with B2/B3 glenoid. METHODS: Between 2014 and 2020, 41shoulders (in 35 patients, mean age of 57.9 years) underwent HA-PYC combined with CCR reaming for B2 (n=30) or B3 (n=11) osteoarthritis. Patients were prospectively followed with computed tomography (CT) scans performed preoperatively, immediate postoperatively and at last follow-up (> 2 years). The primary outcomes were 3D-corrected CT-scan measurements of glenoid version, PHS, progression of glenoid erosion. Secondary outcomes included functional outcome scores, return to activities, and revision rate and complications. RESULTS: At a mean follow-up of 4.5 years (2 to 9.5 years), the prosthesis survival was 95% (39/41). No patient has been reoperated for painful glenoid erosion. The mean glenoid retroversion decreased from 17.1° ± 7.5 preoperatively to 8.3° ± 8.2 at last follow-up (p=0.001), and the mean PHS from 74% to 56.5% (p=0.001) based on the scapular plane and from 59.9% to 50.3% based on the glenoid plane. The humeral head was recentered in 97% according to the glenoid surface and 71% according to the scapular plane. Correction of PHS in the scapular plane was highly correlated to correction of glenoid retroversion (p<0.001). CT-scan measurements showed that the average total medialization was 3.7 ± 3.2 mm (2.0 ± 1.8 mm due to reaming and only 1.7 ± 2.4 mm due to erosion). The Adjusted Constant score increased from 43% ± 13 to 97% ± 16 and the Subjective Shoulder Value from 38% ± 14 to 84 % ± 12 (p<0.001). Overall, 84% of active patients returned to work and all patients returned to sports. CONCLUSION: In B2/B3 glenoid arthritis, corrective, concentric glenoid reaming combined with HA-PYC improves centering of the humeral head and shows a low risk of painful glenoid erosion at mid-term follow-up. The combined procedure results in excellent functional outcomes and high prosthesis survivorship at mid-term follow-up. HA-PYC and CCR is offering an alternative shoulder arthroplasty for young/active patients with B2/B3 glenoid osteoarthritis who want to return to work or sports practice.

Anatomic total shoulder arthroplasty for B2 glenoids treated with asymmetric reaming has equivalent survivorship and patient outcomes compared with type A glenoids at a mean 9-year follow-up.

BACKGROUND: Walch B2 glenoids can present a challenge to shoulder arthroplasty surgeons. Short-term studies have demonstrated that corrective reaming to 10° of retroversion in anatomic total shoulder arthroplasty (aTSA) can result in good outcomes; however, there is little data reporting the long-term outcomes in this cohort. B2 glenoids treated with high-side reaming present a theoretical risk of early glenoid component failure as one may ream into the subchondral bone. This study aimed to demonstrate that (1) B2 glenoids treated with corrective reaming have durable results and (2) offer similar results to Walch A1/2 in long-term follow-up. METHODS: Patients who underwent aTSA by a single surgeon (E.L.F.) were identified from a shoulder arthroplasty registry. Inclusion criteria included Walch A1, A2, or B2 glenoid; a diagnosis of primary shoulder osteoarthritis; and a minimum radiographic and clinical follow-up of 5 years. Forty-three patients with B2 glenoids were compared to a cohort of 42 patients with A1 or A2 glenoids. Preoperative computed tomography (CT) and radiographs were used to assess deformity, glenoid version, and posterior subluxation of the humeral head. Postoperatively, patients were assessed with radiographs and patient-reported outcome measures including American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES) score, Simple Shoulder Test (SST) score, and visual analog scale (VAS). RESULTS: Eighty-five shoulders (82 patients, 42 B2 and 43 A1/A2 glenoids) with an average follow-up of 9.4 years were included. In the B2 cohort, the average retroversion was 21.1° and posterior subluxation was 69.4% compared with 10.6° (P < .001) and 57.5% (P < .001), respectively, in the A1 or A2 cohort. The cohort demographics were similar except for male sex (B2 69.8% vs. A1 or A2 37.2%, P = .008). There was no difference between the cohorts in their improvement in ASES (P = .807), SST (P = .586), and VAS (P = .930) scores. There was no difference in lateral humeral offset (P = .889) or acromial humeral interval (P = .468) between initial postoperative and final follow-up visits. Survivorship for B2 glenoids was 97.6%, 94.1%, and 73.3% at 5, 10, and 15 years, respectively, compared with 97.6%, 91.9%, and 83.5% in type A glenoids. The revision rate was similar between the 2 groups (P = .432). Lazarus score (P = .682) and rates of humeral radiolucency (P = .366) and humeral osteolysis (P = .194) were similar between the 2 cohorts at final follow-up. CONCLUSION: Asymmetric reaming of patients with B2 glenoids is a reliable method of glenoid preparation with excellent mid- to long-term clinical results, patient-reported outcomes, and low revision rates similar to their A1 and A2 counterparts.

Optimized reamer geometry for controlled reaming of the proximal femur.

Preparation of the femoral proximal medullary cavity by reaming is essential for intramedullary nail osteosynthesis and hip revision arthroplasty. The use of reamers sometimes exerts high torsional forces on the bone. Design and direction of rotation of the reamer are potential influencing factors. The aim of this biomechanical study is to evaluate the best combination of a right- or left-cutting reamer with a clockwise- or counterclockwise-rotating insert in terms of preparation and safety. Right- and left-cutting reamers with conical design were each introduced into five synthetic femurs in both clockwise and counterclockwise rotation with constant feed force. A specially constructed test system was used for this series of tests, with which the respective intramedullary channel were reamed step by step. This was then used to determine the required torque. In addition, the feed rate measurement was analyzed using a modified digital caliper. The feed rates of the reamers with rotation in the same direction as the cutting direction were significantly increased compared to rotation in the opposite cutting direction (CCRLC vs. CCRRC 76.8 ± 9.0 mm/s vs. 25.2 ± 8.3 mm/s and CRRC vs. CRLC 54.3 ± 12.3 mm/s vs. 19.3 ± 0.6 mm/s; p < 0.01). In contrast, the mean torque during the reaming process was identical in all four groups. When preparing the proximal femoral medullary cavity, especially in cases with fragile bone structure, the available reamers should be introduced in opposite rotation to the cutting direction to achieve a more controllable feed of the reamer. Left-cutting reamers represent an alternative, using them in the usual clockwise-rotating technique to reduce the risk of complications during reaming.

In vivo study to assess fat embolism resulting from the Reamer-Irrigator-Aspirator 2 system compared to a novel aspirator-based concept for intramedullary bone graft harvesting.

INTRODUCTION: Fat embolism (FE) following intramedullary (IM) reaming can cause severe pulmonary complications and sudden death. Recently, a new harvesting concept was introduced in which a novel aspirator is used first for bone marrow (BM) aspiration and then for subsequent aspiration of morselized endosteal bone during sequential reaming (A + R + A). In contrast to the established Reamer-Irrigator-Aspirator (RIA) 2 system, the new A + R + A concept allows for the evacuation of fatty BM prior to reaming. In this study, we hypothesized that the risk of FE, associated coagulopathic reactions and pulmonary FE would be comparable between the RIA 2 system and the A + R + A concept. MATERIALS AND METHODS: Intramedullary bone graft was harvested from intact femora of 16 Merino sheep (age: 1-2 years) with either the RIA 2 system (n = 8) or the A + R + A concept (n = 8). Fat intravasation was monitored with the Gurd test, coagulopathic response with D-dimer blood level concentration and pulmonary FE with histological evaluation of the lungs. RESULTS: The total number and average size of intravasated fat particles was similar between groups (p = 0.13 and p = 0.98, respectively). D-dimer concentration did not significantly increase within 4 h after completion of surgery (RIA 2: p = 0.82; A + R + A: p = 0.23), with an interaction effect similar between groups (p = 0.65). The average lung area covered with fat globules was similar between groups (p = 0.17). CONCLUSIONS: The use of the RIA 2 system and the novel A + R + A harvesting concept which consists of BM evacuation followed by sequential IM reaming and aspiration of endosteal bone, resulted in only minor fat intravasation, coagulopathic reactions and pulmonary FE, with no significant differences between the groups. Our results, therefore, suggest that both the RIA 2 system and the new A + R + A concept are comparable technologies in terms of FE-related complications.

The effect of eccentric glenoid reaming in reverse shoulder artrhoplasty for glenohumeral osteoarthritis.

Background: The objective of this study was to evaluate the abilitiy of eccentric reaming in reverse total shoulder arthroplasty (RSA), in patients with glenohumeral osteoarthritis (GHOA), to correct preoperative glenoid retroversion and to compare with cuff tear arthopaty (CTA) cases. Methods: Fifty-nine patients who underwent RSA with GHOA or CTA diagnosis between 2013 and 2022 and who had pre- and postoperative computed tomography scans were included in the study. Preoperative glenoid version and postoperative glenoid component versions of 17 patients with GHOA and 40 patients with CTA were measured by Friedman method. Results: The median preoperative glenoid versions in GHOA and CTA groups were measured as 16° and 4° retroverted respectively (p < 0.01). The median postoperative glenoid component versions in GHOA and CTA groups were 5° and 3° retroverted respectively (p = 0.09). The version change differences between the two groups varied significantly (p < 0.01). Conclusions: GHOA is related with higher preoperative glenoid retroversion compared to CTA. However; with eccentric glenoid reaming, adequate version correction and similar postoperative glenoid version can be achieved in GHOA compared to CTA when performing a RSA. Level of evidence: Level III. Retrospective study. Treatment study.

Pyrocarbon hemiprostheses show little glenoid erosion and good clinical function at 5.5 years of follow-up.

BACKGROUND: The success of traditional shoulder hemiarthroplasty (HA) with cobalt-chromium heads is limited by painful glenoid erosion with problematic bone loss. Hemiprostheses with pyrolytic carbon (PyC) heads have shown reduced glenoid erosion in experimental laboratory studies. Few in vivo data are available. METHODS: We performed a single-center consecutive cohort study of 31 of 34 patients (91%) who underwent PyC HA between September 2013 and June 2018. In 11 of these patients, concentric glenoid reaming was additionally performed. The mean follow-up period was 5.5 years (range, 3.5-7 years). Standardized radiographs were taken, and clinical function (Constant score) and pain (visual analog scale score) were recorded. Anteroposterior radiographs were analyzed according to an established method by 2 independent observers: A line parallel to the superior and inferior glenoid rim was translated to the most medial point of the glenoid surface. A further parallel line was placed on the spinoglenoid notch. The distance between these 2 lines was measured. Measurements were scaled using the known diameter of the implanted humeral head component. To assess eccentric erosion, anteroposterior and axial images were classified according to Favard and Walch, respectively. RESULTS: Mean medial glenoid erosion measured 1.4 mm at an average of 5.5 years of follow-up. In the first year, 0.8 mm of erosion was observed, significantly more than the average erosion per year of 0.3 mm (P < .001). Mean erosion per year was 0.4 mm in patients with glenoid reaming vs. 0.2 mm in those without reaming (P = .09). An evolution of glenoid morphology was observed in 6 patients, of whom 4 had a progression of the erosion grade. The prosthesis survival rate was 100%. The Constant score improved from 45.0 preoperatively to 78.0 at 2-3 years postoperatively and 78.8 at latest follow-up (5.5 years postoperatively) (P < .001). The pain score on a visual analog scale decreased from 6.7 (range, 3-9) preoperatively to 2.2 (range, 0-8) at latest follow-up (P < .001). There was a weak correlation (r = 0.37) between erosion and pain improvement (P = .039) and no correlation between erosion and change in Constant score (r = 0.06). CONCLUSION: PyC HA caused little glenoid erosion and a sustained improvement in clinical function in our cohort at mid-term follow-up. PyC demonstrates a biphasic development of glenoid erosion, with a reduced rate after the first year. PyC HA should therefore be considered as an alternative to cobalt-chromium HA and to anatomical total shoulder arthroplasty for patients with a high risk of glenoid component complications.

Influence of backside seating parameters and augmented baseplate components in virtual planning for reverse shoulder arthroplasty.

BACKGROUND: The primary goal of this investigation was to examine the influence of a backside seating percentage variable on volume of reamed bone and contact area in virtual planning for glenoid baseplate placement for reverse total shoulder arthroplasty (RTSA). The secondary goal was to assess how the option of augmented glenoid baseplate components affected reamed volume and cortical contact area of virtually positioned baseplates. METHODS: Nine surgeons virtually planned 30 RTSA cases using a commercially available software system. The 30 cases were chosen to span a spectrum of glenoid deformity. The study consisted of 3 phases. In phase 1, cases were planned with the backside seating percentage blinded and without the option of augmented baseplate components. In phase 2, the backside seating parameter was unblinded. In phase 3, augmented baseplate components were added as an option. Implant version and inclination were recorded. By use of computer-assisted design models, total volume of bone reamed, as well as reamed cortical volume and cancellous volume, was calculated. Total, cortical, and cancellous baseplate contact areas were also calculated. Finally, total glenoid lateralization was calculated for each phase and compared. RESULTS: Mean implant version was clinically similar across phases but was statistically significantly lower in phase 3 (P = .006 compared with phase 1 and P = .001 compared with phase 2). Mean implant inclination was clinically similar across phases but was statistically significantly lower in phase 3 (P < .001). Phase 3 had statistically significantly lower cancellous and total reamed bone volumes compared with phase 1 and phase 2 (P < .001 for all comparisons). Phase 3 had statistically significantly larger cortical contact area, lower cancellous contact area, and larger total contact area compared with phase 1 and phase 2 (P < .001 for all comparisons). Phase 3 had significantly greater glenoid lateralization (mean, 10.5 mm) compared with phase 1 (mean, 7.8 mm; P < .001) and phase 2 (mean, 7.9 mm; P < .001). CONCLUSIONS: Across a wide range of glenoid pathology during virtual surgical planning, experienced shoulder arthroplasty surgeons chose augmented baseplates frequently, and the option of a full-wedge augmented baseplate resulted in statistically significantly greater correction of glenoid deformity, improved total and cortical baseplate contact area, less cancellous reamed bone, and greater glenoid lateralization. Backside seating information does not have a significant impact on how glenoid baseplates are virtually positioned for RTSA, nor does it impact the baseplate contact area or volume of reamed bone.

Minimum 10-year follow-up of anatomic total shoulder arthroplasty and ream-and-run arthroplasty for primary glenohumeral osteoarthritis.

BACKGROUND: Reports on long term outcomes and failures of shoulder arthroplasty are uncommon. The purpose of this study is to present minimum 10-year outcomes in consecutive patients undergoing ream-and-run and anatomic total shoulder arthroplasty (TSA) for primary glenohumeral arthritis. METHODS: This study analyzed consecutive patients who had undergone a ream-and-run or TSA with minimum 10-year follow-up. Pain scores and Simple Shoulder Test (SST) values were obtained preoperatively and at a minimum of 10 years postoperatively via e-mail or mail-in response. Percentage of maximum possible improvement (%MPI) was also calculated. RESULTS: Of 127 eligible patients, 63 (50%) responded to a 10-year survey. This included 34 patients undergoing ream-and-run arthroplasty and 29 patients undergoing TSA. The ream-and-run patients were significantly younger than the TSA patients (60 ± 7 vs. 68 ± 8, P < .001), predominantly male (97% vs. 41%, P < .001), and had a lower American Society of Anesthesiologists classification (P = .018). In the ream-and-run group, the mean pain score improved from a preoperative value of 6.5 ± 1.9 to 0.9 ± 1.3 (P < .001), and the mean SST score improved from 5.4 ± 2.4 to 10.3 ± 2.1 at 10-year follow-up (P < .001). Twenty-eight (82%) achieved an SST improvement above the minimally clinically important difference (MCID) of 2.6. Four patients (12%) underwent single-stage exchange to another hemiarthroplasty, whereas 1 (3%) required manipulation under anesthesia. In the TSA group, the pain score improved from a preoperative value of 6.6 ± 2.2 to 1.2 ± 2.3 (P < .001), and the SST score improved from 3.8 ± 2.6 to 8.9 ± 2.6 at 10-year follow-up (P < .001). Of the 29 patients who underwent a TSA, 27 (93%) achieved an SST improvement above the MCID of 1.6. No patient in the TSA group required reoperation. CONCLUSION: Although the characteristics of the patients differ between the 2 groups, excellent functional results can be obtained with the ream-and-run arthroplasty and TSA for glenohumeral osteoarthritis.

Intramedullary Nail Fixation for the Treatment of Symptomatic Fibular Nonunion: A Case Series.

Ankle fractures are a relatively common injury in the lower extremity. They can be treated with conservative management if they are nondisplaced and only involve the fibula. Nonunions at the fracture site, however, are a potential complicating factor during treatment. There is growing literature supporting the use of intramedullary fixation for fracture care. Not only does it have the advantages of using smaller incisions to preserve periosteum while providing improved biomechanical outcomes, but intramedullary reaming can help stimulate cells to promote bone healing. Few articles discuss the use and success of intramedullary reaming in revision surgery of the distal fibula. We present 3 cases of computed tomography-confirmed fibular nonunion following conservative fracture care, which underwent revision surgery with fibular nail fixation technique. These cases illustrate clinical and image findings as well as highlight the surgical technique used for each patient. At follow-up, all patients were asymptomatic and radiographs confirmed healing of the previous nonunion site. These cases are examples of successful revision for fibular fracture nonunion using intramedullary nail fixation.Level of Evidence: Level IV: Case series.

Optimizing glenoid bone preservation in reverse total shoulder arthroplasty using augmented baseplates.

Background: As techniques and implants for reverse total shoulder arthroplasty (rTSA) evolve, a greater emphasis is being placed on preserving glenoid bone stock and optimizing shoulder biomechanics. Augmented baseplates preserve glenoid bone and improve shoulder range of motion by lateralizing the center of rotation of the glenosphere, while also reducing postoperative complications after rTSA. The technique for bone preservation with use of augmented baseplates in the absence of bone loss and the outcomes of a series of cases are contained in this report. Materials and Methods: A retrospective chart review was conducted for 37 patients with Walch type A1/Sirveaux E0 glenoids who underwent primary rTSA using a bone preserving technique with an augmented baseplate between January 2018 and January 2019 at a single site by a single surgeon. The primary outcome measures were range of motion, strength, and patient-reported clinical outcomes (pain and function rated on a visual analog scale; single assessment numeric evaluation; American Shoulder and Elbow Surgeons score; and disabilities of the arm, shoulder, and hand score). Preoperative radiographs were analyzed for the presence of glenoid bone loss and postoperative radiographs were assessed for evidence of component loosening and scapular notching. A repeated measures design was used, and preoperative and postoperative comparisons were made using parametric t-tests. Results: At an average follow-up of 23.3 ± 6.3 months, there was a significant improvement in active forward flexion and abduction and nonsignificant improvement in external rotation. There was no radiographic evidence of glenoid notching in any of the patients and optimal glenoid inclination was observed. Patient-reported outcome scores after an average of 25.2 ± 10.0 months indicated a significant improvement in pain, function, and scores for the American Shoulder and Elbow Surgeons and disabilities of the arm, shoulder, and hand assessments. There were no substantial postoperative radiographic findings, intra/postoperative complications, or revisions/reoperations. Conclusion: rTSA with augmented baseplates for glenoid bone preservation in patients with minimal or no bone loss is effective for preserving glenoid bone stock and significantly improves the range of motion and patient-reported outcomes after approximately 2 years.

Serial 3D CT analysis of humeral head alignment in relation to glenoid correction and outcomes after total shoulder arthroplasty.

Background: Posterior humeral head (HH) subluxation after anatomic total shoulder arthroplasty (aTSA) is associated with worse outcomes, but it is unclear how corrective glenoid reaming correlates with HH alignment and whether HH alignment changes over time. Therefore, it was aimed to analyze the relationship between HH alignment and the scapula following aTSA to identify anatomic and surgical factors that contribute to realignment of the HH, glenoid loosening, and clinical outcomes. Methods: Three-dimensional scapulohumeral alignment was assessed on three-dimensionally reconstructed computed tomography scans of 23 patients: preoperative (T0), 2 years post-aTSA (T1), and ≥5 years post-aTSA (T2). Anterior-posterior (AP), superior-inferior (SI), and medial-lateral offset measures of the HH center to the scapula were referenced to the HH diameter (scapulohumeral subluxation index). Glenoid version and inclination were measured at T0 and T1. Central peg osteolysis, rotator cuff fatty infiltration, and vault perforation were assessed on two-dimensional computed tomography. Relative Constant Score at T2 measured clinical outcome. Results: Glenoid correction correlated strongly with AP and SI position of the HH (r = 0.733 and r = 0.797, respectively). Each degree of retroversion correction resulted in 0.9% AP scapulohumeral subluxation index offset change toward anterior. Each degree of inclination correction to superior resulted in a 1.0% offset change toward superior. A gradual postoperative proximal (mean difference [MD], -3%; P = .019), anterior (MD, 2%; P = .025), and medial (MD, 3 mm; P < .001) HH migration was observed. Asymmetric progressive rotator cuff fatty infiltration was associated with the direction of change in AP alignment over time (odds ratio, 2.04; P = .046), with progressive subscapularis fatty infiltration as the primary factor associated with gradual anterior HH translation (odds ratio, 15.61; P = .028). Gradual HH medialization was an indicator of glenoid components at risk for loosening (difference between medians, 4 mm; P = .003). Osteolysis around the central glenoid peg was influenced by overcorrection of glenoid version (MD, 7°; P = .038). Preoperative glenoid inclination was the sole anatomical or surgical factor predicting clinical outcome, as larger inferior inclination at T0 was associated with worse relative Constant Score at T2 (P = .016). Conclusion: Corrective glenoid reaming was an effective surgical technique to correct HH alignment in the AP and SI direction. Gradual anterior HH translation after aTSA was associated with progressive subscapularis fatty infiltration, and substantial HH medialization was an important indicator for potential glenoid loosening. While postoperative glenoid version and AP HH alignment were important for radiographic outcome, preoperative glenoid inclination predicted clinical outcome, as larger preoperative inferior inclination resulted in worse clinical scores.

The statistical fragility of intramedullary reaming in tibial nail fixation: a systematic review.

PURPOSE: To report the statistical stability of prospective clinical trials evaluating the effect of intramedullary reaming on rates of non-union in tibial fractures through calculation of the fragility metrics for non-union rates and all other dichotomous outcomes. METHODS: Literature search was conducted for prospective clinical trials evaluating the effect of intramedullary reaming on non-union rates in tibial nailing. All dichotomous outcomes were extracted from the manuscripts. The fragility index (FI) and reverse fragility index (RFI) were calculated by determining the number of event reversals required for a statistically significant outcome to lose significance and vice-versa. The fragility quotient (FQ) and reverse fragility quotient (RFQ) were calculated by dividing the FI or RFI by the sample size, respectively. Outcomes were defined as "fragile" if the FI or RFI was found to be less than or equal to the number of patients lost to follow-up. RESULTS: Literature search identified 579 results which produced ten studies meeting the criteria for review. There were 111 outcomes identified for analysis, of which 89 (80%) exhibited statistical fragility. For reported outcomes across the studies the median and mean FI was 2, the median FQ was 0.019, the mean FQ was 0.030, the median RFI was 4, the mean RFI was 3.95, the median RFQ was 0.045, and the mean RFQ was 0.030. Four studies reported outcomes which were found to have an FI of 0. CONCLUSIONS: The studies evaluating the effect of intramedullary reaming on tibial nail fixation demonstrate considerable fragility. On average, two event reversals for significant findings, and four event reversals for insignificant findings are sufficient to alter statistical significance. LEVEL OF EVIDENCE: Level II, systematic review of Level I and Level II studies.

Factors associated with success of ream-and-run arthroplasty at a minimum of 5 years.

BACKGROUND: Ream-and-run arthroplasty offers improvements in shoulder pain and function for patients with primary glenohumeral arthritis who wish to avoid limitations associated with a polyethylene glenoid component. Longer-term clinical outcome assessments of the ream-and-run procedure are sparse in the literature. This study aimed to present minimum 5-year functional outcomes in a large cohort following ream-and-run arthroplasty to determine factors associated with clinical success and reoperation. METHODS: Patients who underwent ream-and-run surgery with a minimum of 5 years of follow-up were identified through a retrospective review of a prospectively maintained database from a single academic institution. To assess clinical outcomes, the Simple Shoulder Test (SST) was administered and assessed to determine achievement of the minimal clinically important difference, as well as the necessity for open revision surgery. Factors associated with P < .1 on univariate analysis were included in multivariate analysis. RESULTS: Of 228 patients who consented to undergo long-term follow-up, 201 (88%) were included in our analysis (mean follow-up period, 7.6 ± 2.1 years). The average age was 59.4 ± 8.8 years, and 93% of patients were men. The majority of patients had a diagnosis of osteoarthritis (79%) or capsulorrhaphy arthropathy (10%). SST scores improved from a mean of 4.9 ± 2.5 preoperatively to a mean of 10.2 ± 2.6 at latest follow-up. The minimal clinically important difference in the SST score of 2.6 was reached by 165 patients (82%). Male sex (P = .020), nondiabetic status (P = .080), and lower preoperative SST score (P < .001) were included in a multivariate analysis. Male sex (P = .010) and lower preoperative SST score (P < .001) were associated with clinically important improvements in SST scores on multivariate analysis. Open revision surgery was required in 22 patients (11%). Younger age (P < .001), female sex (P = .055), and higher preoperative pain score (P = .023) were included in a multivariate analysis. Only younger age was predictive of open revision surgery (P = .003). CONCLUSIONS: Ream-and-run arthroplasty can provide significant and clinically important improvements in clinical outcomes at minimum 5-year follow-up. Successful clinical outcomes were significantly associated with male sex and lower preoperative SST scores. Reoperation was more common in younger patients.

Total shoulder arthroplasty in patients with a B2 glenoid addressed with corrective reaming: mean 8-year follow-up.

BACKGROUND: The management of Walch B2 glenoid deformities in primary glenohumeral osteoarthritis is frequently debated. Previous literature has shown that the treatment of B2 glenoids with high-side reaming and anatomic total shoulder arthroplasty (aTSA) perform well in the short-term but is associated with an increased glenoid component failure rate in severe deformities. Therefore, many have explored alternative options, including augmented anatomic glenoid components and reverse shoulder arthroplasty. Our goal in this study is to provide mid-term radiographic and clinical outcomes after high-side reaming and aTSA for B2 glenoids. METHODS: Patients were followed both clinically and radiographically. Preoperative computed tomography scans were used for retrospective analysis of deformity. Both preoperative and postoperative visual analog scale pain, American Shoulder and Elbow Surgeons score, and Simple Shoulder Test scores were collected. Radiographs were analyzed preoperatively and postoperatively for humeral head decentering relative to the glenoid vault, immediate glenoid seating, and final glenoid peg radiolucency. RESULTS: Of the original cohort of 59 patients (6 now deceased) reported at a mean radiographic follow-up of 3.4 years, 34 shoulders in 33 patients with B2 glenoids (mean retroversion 18.9°, range 4°-32°) were available for follow-up at a mean of 8.6 years (range 5.5-11.2) after high-side glenoid reaming with aTSA. Three (5.1%) of the original 59 shoulder were revised. At final follow-up, 3 of 30 (10.0%) shoulders had radiographic glenoid component failure, but were unrevised. Glenoid component failure was associated with worse initial glenoid component seating (mean Lazarus score 1.2 vs. 2.0, P = .002). Glenoid failure was also associated with increased posterior humeral head subluxation at 2-4 year follow-up (mean 5.6% vs. 12.6%, P = .045) and at final follow-up (mean 7.0% vs. 21%, P = .002). There was no association between glenoid component failure and preoperative retroversion, inclination, or humeral head subluxation (all P > .05). Glenoid component failure was associated with worse American Shoulder and Elbow Surgeons (88 vs. 73) and visual analog scale pain (0.8 vs. 2.1) scores (both P = .03). CONCLUSIONS: At a mean of 8.6 years, 88% of shoulders available for follow-up had well-fixed glenoid components. Glenoid component failure was associated with poor initial glenoid component seating, with failed components having an average of 25% of the glenoid component not seated. Preoperative deformity such as glenoid retroversion, inclination, or humeral head subluxation did not predict glenoid component failure. This study supports that initial glenoid component seating and recurrence of posterior humeral head subluxation may be the most important factors for mid-term glenoid component survival in aTSA in patients with B2 glenoids.

Artificially Intelligent Three-Dimensionally-Printed Patient-Specific Instrument Improves Total Hip Arthroplasty Accuracy.

BACKGROUND: Patient-specific instrumentation (PSI) has the potential to improve the accuracy of implant positioning in total hip arthroplasty (THA). This prospective clinical study aimed to develop artificial intelligence to increase PSI production efficiency and assess accuracy, clinical outcomes, and learning curves. METHODS: A convolutional neural network was applied to automatically process computer tomography images. PSI size and position were designed to guide the acetabular preparation and femoral neck resection. Thirty patients who underwent PSI-assisted THAs were matched to thirty patients who underwent free-hand THAs, and the component positions, as well as radiographic and clinical outcomes were analyzed. RESULTS: PSI-assisted THA was significantly more accurate than free-hand THA at achieving the target component position. The mean absolute errors of cup inclination (P = .004) and anteversion (P < .001) were significantly smaller in the PSI group with fewer outliers. Calcar length (P = .002) and neck length (P = .026) were also more accurate in the PSI group. The leg length discrepancy was significantly lower in the PSI group (P = .002). There were no significant differences in operation time, blood loss, leg length discrepancy, or cup position among the first, second, and last 10 cases. CONCLUSION: PSI-assisted THA offered more accurate component positions and better radiographic outcomes than free-hand THA. There was no evidence of a learning curve. Our findings suggest that PSI is a convenient and practical option to help surgeons achieve accurate surgical outcomes.

Complications associated using the reamer-irrigator -aspirator (RIA) system: a systematic review and meta-analysis.

INTRODUCTION: Complications associated with the application of the Reamer-irrigator-Aspirator (RIA) system are described in the literature. However, to date a systematic review and meta-analysis to assess prevalence of complications associated with the use of the RIA system have not been conducted. MATERIALS AND METHODS: The review is registered with PROSPERO (CRD42021269982). MEDLINE, the Web of Science Core Collection, and Embase were searched from the inception to 10 August 2021. The primary objective was to assess complications and blood loss associated with the use of the RIA system. RESULTS: Forty-seven studies involving 1834 procedures performed with the RIA system were finally included. A total of 105 complications were reported, with a pooled estimated overall prevalence of 1.7% with a 95% confidence interval (CI) of 0.40 to 3.60, with cortex perforation being the largest reported complication with a total of 34 incidences. A significant subgroup difference was observed (p = 0.02). In subgroup 1 (bone graft harvesting), complication prevalence was 1.4% (95% CI 0.2-3.4); in subgroup 2 (clearance intramedullary canal) it was 0.7% (95% CI 0.00-6.30) and in subgroup 3 (reaming with RIA system prior to nail fixation) 11.9% (95% CI 1.80-26.40). No statistically significant difference for tibia and femur as RIA system application site was observed (CI 0.69-4.19). In studies reporting blood loss, a mean volume of 803.29 ml, a mean drop of hemoglobin of 3.74 g/dl and a necessity of blood transfusion in 9.72% of the patients were observed. CONCLUSIONS: The systematic review and meta-analysis demonstrate a low overall prevalence rate of complications associated with the RIA system. However, especially the risk of cortical perforation and the frequently reported relevant intraoperative blood loss are complications that should be anticipated in perioperative management and ultimately considered when using the RIA system.

Influence of bone morphology and femur preparation method on the primary stability of hip revision stems.

Aseptic loosening is one of the major reasons for re-revisions of cementless revision stems. Insufficient primary stability is associated with bone characteristics and the surgical process. This study aimed to investigate how femur morphology and preparation methods influence the primary stability of revision stems. The Femur morphology was described by the upper femoral curvature (UFC) and an individualized Dorr type classification based on the ratio between the canal-to-calcar ratio (CCR*) and the cortical index (CI*) introduced as the cortical-canal shape (CCS). Manual and powered reaming in combination with helical and straight reamers were used to prepare the bone cavity of 10 cadaveric human femur pairs. Forces during stem impaction were recorded (Reclaim, Depuy Synthes). Micromotion at the bone-implant interface during cyclic axial loading and torsional load to failure was determined. The CCS and impaction forces (R2 = 0.817, p < 0.001) or torsional strength (R2 = 0.577, p < 0.001) are inversely related. CCS did not correlate with micromotion during axial loading (R2 = 0.001, p > 0.999), but proximal femoral curvature did (R2 = 0.462, p = 0.015). Powered reaming and straight reamers led to an improved torsional strength (both: p = 0.043). The Individualized Dorr classification CCS and UFC allows a good estimation of the primary stability of revision stems. For severely curved Dorr type-C femurs, an alternative anchorage method should be considered clinically.

Study on Characteristics for Reaming Titanium Alloy Ti6Al4V with Two Kinds of Cemented-Carbide Groove Reamers.

Titanium alloys have been extensively used in practical machining owing to their outstanding mechanical properties, high specific strength and low thermal deformation. In this study, the cutting experiments are carried out on Ti6Al4V material with right-hand and straight cemented-carbide groove reamers. The experimental results show that the cutting force with the right-hand reamer is smaller compared to straight groove reamer due to the groove structure. The main tool wear forms are micro-chipping, adhesive wear, abrasive wear, and coating falling off on the right-hand reamer, while there is a built-up edge and serious damage failure on the cutting edge of the straight groove reamer. Notch wear and pitting on the surface of the hole wall are mainly caused by chip adhesion and tool wear. The surface-roughness value is the lowest as the cutting speed is 60 m/min and the feed rate is 0.4 mm/rev. The holes machined by the right-hand reamer have a low hole diameter deviation with various cutting parameters. The geometric accuracy of cylindricity is higher as the feed rate is 0.4 mm/rev and the cutting speed is 40 m/min for both kinds of reamers, and the cylindricity is better with the right-hand reamer.

Early outcome of humeral head replacement with glenoid reaming arthroplasty (Ream and Run) for treatment of advanced glenohumeral osteoarthritis.

INTRODUCTION: Long-term outcomes of anatomic total shoulder arthroplasty (aTSA) can be compromised by glenoid loosening and failure. The purpose of this study was to evaluate the short- and midterm outcomes of humeral head replacement with glenoid reaming arthroplasty (Ream and Run) for the treatment of advanced glenohumeral osteoarthritis, and to identify associations between preoperative factors and outcomes. METHODS: Forty-nine shoulders (mean age 60 ± 7 years) with minimum 2-year follow-up (mean 4.6 ± 1.7) were evaluated. Forty-three (87.8%) were male. Thirteen (26.5%) had previous nonarthroplasty shoulder surgery. There were 19 (38.8%) Walch type A and 30 (61.2%) type B glenoids. Pre- and postoperative shoulder motion, patient-reported outcomes (PROMs), and health-related quality of life (HRQoL) were assessed. Pre- and postoperative plain radiographs were evaluated. Mixed effects models were used to investigate factors associated with outcomes. RESULTS: Active forward elevation and active external rotation improved from 111.7° ± 23.8° to 139.2° ± 21.1° and 13.3° ± 20.7° to 38.7° ± 14.7°, respectively (P < .001). The mean American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES), Disabilities of the Arm, Shoulder, and Hand questionnaire (DASH), Simple Shoulder Test (SST), and visual analog scale (VAS) shoulder pain scores at the most recent follow-up were 86.6 ± 19.9, 10.1 ± 14.1, 10.5 ± 2.2, and 1.5 ± 2.3, respectively. The mean changes of PROMs were significant and exceeded the minimal clinically important difference for aTSA. The percentage maximal possible improvement for ASES, DASH, and SST were greater than 75%. Male sex (P < .008) and not having prior shoulder surgery (P < .04) were significantly associated with better absolute and greater change in PROMs. Age, preoperative shoulder motion, and Walch glenoid classification were not associated with PROMs. Five (10.2%, 95% confidence interval [CI] 1.8%-18.6%) patients underwent revision for pain. Three additional patients were dissatisfied at final follow-up without undergoing revision, resulting in 16.7% (95% CI 6.1%-27.2%) of patients being dissatisfied with their outcome after their initial RnR. Mean Short Form-6 Dimensions scores improved from 0.66 ± 0.12 to 0.77 ± 0.13 and mean EuroQol-5 Dimensions scores improved from 0.68 ± 0.20 to 0.85 ± 0.17 (P < .001). Improvement in HRQoL was significantly associated with nondominant arm treatment, increased age, and greater preoperative SST score. Annual medialization of the humeral head center of rotation was 0.56 ± 1.6 mm/yr. No radiographic measure was associated with long-term PROMs. CONCLUSION: Ream and Run can provide significant and clinically important improvement in PROMs and HRQoL for a high percentage of patients at short- and midterm follow-up. This procedure is an appropriate alternative to aTSA in select patients.

Flexible Versus Rigid Reaming Systems for Independent Femoral Tunnel Reaming During ACL Reconstruction: Minimum 2-Year Clinical Outcomes.

Background: Radiographic and cadaveric studies have suggested that anatomic anterior cruciate ligament reconstruction (ACLR) femoral tunnel drilling with the use of a flexible reaming system through an anteromedial portal (AM-FR) may result in a different graft and femoral tunnel position compared with using a rigid reamer through an accessory anteromedial portal with hyperflexion (AAM-RR). No prior studies have directly compared clinical outcomes between the use of these 2 techniques for femoral tunnel creation during ACLR. Purpose: To compare revision rates at a minimum of 2 years postoperatively for patients who underwent ACLR with AM-FR versus AAM-RR. The secondary objectives were to compare functional testing and patient-reported outcomes between the cohorts. Study Design: Cohort study; Level of evidence, 3. Methods: Included were consecutive patients at a single academic institution between 2013 and 2018 who underwent primary ACLR without additional ligamentous reconstruction. Patients were separated into 2 groups based on the type of anatomic femoral tunnel drilling: AM-FR or AAM-RR. Graft failure, determined by revision ACLR, was assessed with a minimum 2 years of postoperative follow-up. The authors also compared patient-reported outcome scores (International Knee Documentation Committee [IKDC] and Knee injury and Osteoarthritis Outcome Score [KOOS]) and functional performance testing performed at 6 months postoperatively. Results: A total of 284 (AAM-RR, 232; AM-FR, 52) patients were included. The mean follow-up time was 3.7 ± 1.5 years, with a minimum 2-year follow-up rate of 90%. There was no significant difference in the rate of revision ACLR between the AAM-RR and AM-FR groups (10.8% vs 9.6%, respectively; P = .806). At 6 months postoperatively, there were no significant between-group differences in peak knee extension strength, peak knee flexion strength, limb symmetry indices, or hop testing, as well as no significant differences in IKDC (AAM-RR, 81.1; AM-FR, 78.9; P = .269) or KOOS (AAM-RR, 89.0; AM-FR, 86.7; P = .104). Conclusion: In this limited study, independent femoral tunnel drilling for ACLR using rigid or flexible reaming systems resulted in comparable rates of revision ACLR at a minimum of 2 years postoperatively, with no significant differences in strength assessments or patient-reported outcomes at 6 months postoperatively.