Optimization of a rapid, sensitive, and high throughput molecular sensor to measure canola protoplast respiratory metabolism as a means of screening nanomaterial cytotoxicity.

Nanomaterial-mediated plant genetic engineering holds promise for developing new crop cultivars but can be hindered by nanomaterial toxicity to protoplasts. We present a fast, high-throughput method for assessing protoplast viability using resazurin, a non-toxic dye converted to highly fluorescent resorufin during respiration. Protoplasts isolated from hypocotyl canola (Brassica napus L.) were evaluated at varying temperatures (4, 10, 20, 30 ˚C) and time intervals (1-24 h). Optimal conditions for detecting protoplast viability were identified as 20,000 cells incubated with 40 µM resazurin at room temperature for 3 h. The assay was applied to evaluate the cytotoxicity of silver nanospheres, silica nanospheres, cholesteryl-butyrate nanoemulsion, and lipid nanoparticles. The cholesteryl-butyrate nanoemulsion and lipid nanoparticles exhibited toxicity across all tested concentrations (5-500 ng/ml), except at 5 ng/ml. Silver nanospheres were toxic across all tested concentrations (5-500 ng/ml) and sizes (20-100 nm), except for the larger size (100 nm) at 5 ng/ml. Silica nanospheres showed no toxicity at 5 ng/ml across all tested sizes (12-230 nm). Our results highlight that nanoparticle size and concentration significantly impact protoplast toxicity. Overall, the results showed that the resazurin assay is a precise, rapid, and scalable tool for screening nanomaterial cytotoxicity, enabling more accurate evaluations before using nanomaterials in genetic engineering.

Evaluation of resazurin phenoxazine dye as a highly sensitive cell viability potency assay for natural killer cell-derived extracellular vesicle-based cancer biotherapeutics.

Natural killer cell-derived extracellular vesicles (NK-EVs) are candidate biotherapeutics against various cancers. However, standardised potency assays are necessary for a reliable assessment of NK-EVs' cytotoxicity. This study aims to thoroughly evaluate a highly sensitive resazurin phenoxazine-based cell viability potency assay (measurement of the cellular redox metabolism) for quantifying the cytotoxicity of NK-EVs against leukaemia K562 cells (suspension model) and breast cancer MDA-MB-231 cells (adherent model) in vitro. The assay was evaluated based on common analytical parameters setforth by regulatory guidelines, including specificity, selectivity,accuracy, precision, linearity, range and stability. Our results revealed that this resazurin-based cell viability potency assay reliably and reproducibly measured a dose-response of NK-EVs' cytotoxic activity against both cancer models. The assay showed precision with 5% and 20% variation for intra-run and inter-run variability. The assay signal showed specificity and selectivity of NK-EVs against cancer target cells, as evidenced by the diminished viability of cancer cells following a 5-hour treatment with NK-EVs, without any detectable interference or background. The linearity analysis of target cancer cells revealed strong linearity for densities of 5000 K562 and 1000 MDA-MB-231 cells per test with a consistent range. Importantly, NK-EVs' dose-response for cytotoxicity showed a strong correlation (|ρ| ∼ 0.8) with the levels of known cytotoxic factors associated with the NK-EVs' corona (FasL, GNLY, GzmB, PFN and IFN-γ), thereby validating the accuracy of the assay. The assay also distinguished cytotoxicity changes in degraded NK-EVs, indicating the ability of the assay to detect the potential loss of sample integrity. Compared to other commonly reported bioassays (i.e., flow cytometry, cell counting, lactate dehydrogenase release assay, DNA-binding reporter assay and confluence assay), our results support this highly sensitive resazurin-based viability potency assay as a high-throughput and quantitative method for assessing NK-EVs' cytotoxicity against both suspension and adherent cancer models for evaluating NK-EVs' biotherapeutics.

High-throughput combination assay for studying biofilm formation of uropathogenic Escherichia coli.

Uropathogenic Escherichia coli, the most common cause for urinary tract infections, forms biofilm enhancing its antibiotic resistance. To assess the effects of compounds on biofilm formation of uropathogenic Escherichia coli UMN026 strain, a high-throughput combination assay using resazurin followed by crystal violet staining was optimized for 384-well microplate. Optimized assay parameters included, for example, resazurin and crystal violet concentrations, and incubation time for readouts. For the assay validation, quality parameters Z' factor, coefficient of variation, signal-to-noise, and signal-to-background were calculated. Microplate uniformity, signal variability, edge well effects, and fold shift were also assessed. Finally, a screening with known antibacterial compounds was conducted to evaluate the assay performance. The best conditions found were achieved by using 12 µg/mL resazurin for 150 min and 0.023% crystal violet. This assay was able to detect compounds displaying antibiofilm activity against UMN026 strain at sub-inhibitory concentrations, in terms of metabolic activity and/or biomass.

A highly specific colorimetric fluorescent probe for rapid detection of hypobromous acid and its application in the environment.

The highly reactive hypobromous acid (HOBr), which is generated after chlorination process of tap water, acts as a precursor of toxic brominated disinfection by-products (Br-DBPs) and further reacts with organic matter. In addition, HOBr produced from the oxidation of Br- during the degradation of pollutants by peroxymonosulfate (PMS, HSO5-) can be considered as the cause of the expedited degradation of pollutants. Therefore, it is particularly important to detect HOBr level in the water environment. Resazurin was selected as a fluorescent probe for selective recognition of HOBr in the water environment. The probe exhibited excellent spectral performance and showed high sensitivity to HOBr (LOD = 515 nM). This method has a relatively ideal recovery rate for HOBr detection in environmental water samples. Furthermore, the HOBr production during the chlorination disinfection process was simulated and the HOBr generated from this process was detected by the probe. Importantly, the process of HOBr recognition by the probe is accompanied by the change of color. Based on this, the relationship between the change of color B/G value and HOBr concentration was successfully constructed. The probe was loaded on the filter paper to make a test strip, which was utilized to the detection of HOBr. Collectively, this work provided a promising and powerful method for HOBr detection in the environment.

Low Oxygen Concentration Reduces Neisseria gonorrhoeae Susceptibility to Resazurin.

Neisseria gonorrhoeae has developed resistance to every antibiotic currently approved for the treatment of gonorrhea, prompting the development of new therapies. The phenoxazine dye resazurin exhibits robust antimicrobial activity against N. gonorrhoeae in vitro but fails to limit vaginal colonization by N. gonorrhoeae in a mouse model. The lack of in vivo efficacy may be due to oxygen limitation as in vitro susceptibility assays with resazurin are conducted under atmospheric oxygen while a microaerophilic environment is present in the vagina. Here, we utilized broth microdilution assays to determine the susceptibility of N. gonorrhoeae to resazurin under low and atmospheric oxygen conditions. The minimal inhibitory concentration of resazurin for multiple N. gonorrhoeae clinical isolates was significantly higher under low oxygen. This effect was specific to resazurin as N. gonorrhoeae was equally susceptible to other antibiotics under low and atmospheric oxygen conditions. The reduced susceptibility of N. gonorrhoeae to resazurin under low oxygen was largely attributed to reduced oxidative stress, as the addition of antioxidants under atmospheric oxygen mimicked the reduced susceptibility to resazurin observed under low oxygen. Together, these data suggest oxygen concentration is an important factor to consider when evaluating the efficacy of new antibiotics against N. gonorrhoeae in vitro.

Slightly viscous dispersions of mucoadhesive polymers as vehicles for nasal administration of dopamine and grape seed extract-loaded solid lipid nanoparticles.

With the aim to find an alternative vehicle to the most used thermosensitive hydrogels for efficient nanotechnology-based nose-to-brain delivery approach for Parkinson's disease (PD) treatment, in this work we evaluated the Dopamine (DA) and the antioxidant grape seed-derived pro-anthocyanidins (Grape Seed Extract, GSE) co-loaded solid lipid nanoparticles (SLNs) put in slight viscous dispersions (SVDs). These SVDs were prepared by dispersion in water at low concentrations of mucoadhesive polymers to which SLN pellets were added. For the purpose, we investigated two polymeric blends, namely Poloxamer/Carbopol (PF-127/Carb) and oxidized alginate/Hydroxypropylmethyl cellulose (AlgOX/HPMC). Rheological studies showed that the two fluids possess Newtonian behaviour with a viscosity slightly higher that water. The pH values of the SVDs were mainly within the normal range of nasal fluid as well as almost no osmotic effect was associated to both SVDs. All the SVDs were capable to provide DA permeation through nasal porcine mucosa. Moreover, it was found that PF-127/Carb blend possesses penetration enhancer capability better than the Alg OX/HPMC combination. Flow cytometry studies demonstrated the uptake of viscous liquids incorporating fluorescent SLNs by human nasal RPMI 2650 cell in time-dependent manner. In conclusion, the SVD formulations may be considered promising alternatives to thermosensitive hydrogels strategy. Moreover, in a broader perspective, such SVD formulations may be also hopeful for treating various neurological diseases beyond PD treatment.

The performance and costs of XTT, resazurin, MTS and luciferin as viability dyes in in vitro susceptibility testing of Madurella mycetomatis.

BACKGROUND: in vitro susceptibility testing for the non-sporulating fungus Madurella mycetomatis is performed with a hyphal suspension as starting inoculum and a viability dye for endpoint reading. Here we compared the performance of four different viability dyes for their use in in vitro susceptibility testing of M. mycetomatis. METHODS: To compare the reproducibility and the agreement between the viability dyes 2,3-bis-(2-methoxy-4-nitro-5-sulfphenyl)-2H-tetrazolium-5-carboxanilide salt (XTT), resazurin, 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium salt (MTS) and luciferin, the in vitro susceptibilities of 14 genetically diverse M. mycetomatis isolates were determined for itraconazole and amphotericin B. The reproducibility, agreement, price and ease of use were compared. RESULTS: Each of the four dyes gave highly reproducible results with >85.7% reproducibility. Percentage agreement ranged between 78.9% and 92.9%. Resazurin was the most economical to use (0.0009 €/minimal inhibitory concentration [MIC]) and could be followed in real time. Luciferin omitted the need to transfer the supernatant to a new 96-well plate, but cost 6.07 €/MIC. CONCLUSION: All four viability dyes were suitable to determine the in vitro susceptibility of M. mycetomatis against itraconazole and amphotericin B. Based on the high reproducibility, high percentage agreement, price and possibility to monitor in real time, resazurin was the most suited for routine in vitro susceptibility testing in the diagnostic laboratory in mycetoma-endemic countries. Because luminescence could be measured directly without the need to transfer the supernatant to a new 96-well plate, luciferin is suitable for drug-screening campaigns. LAY SUMMARY: To determine the in vitro susceptibility testing in the non-sporulating fungus Madurella mycetomatis, a viability dye is needed for endpoint reading. In this study we tested the viability dyes XTT, resazurin, MTS and luciferin for their use in in vitro susceptibility testing. It appeared that they all could be used but there were differences in time to result and costs associated with them.

Theoretical Evaluation of Fluorinated Resazurin Derivatives for In Vivo Applications.

Primarily owing to the pronounced fluorescence exhibited by its reduced form, resazurin (also known as alamarBlue®) is widely employed as a redox sensor to assess cell viability in in vitrostudies. In an effort to broaden its applicability for in vivo studies, molecular adjustments are necessary to align optical properties with the near-infrared imaging window while preserving redox properties. This study delves into the theoretical characterisation of a set of fluorinated resazurin derivatives proposed by Kachur et al., 2015 examining the influence of fluorination on structural and electrochemical properties. Assuming that the conductor-like polarisable continuum model mimics the solvent effect, the density functional level of theory combining M06-2X/6-311G* was used to calculate the redox potentials. Furthermore, (TD-)DFT calculations were performed with PBE0/def2-TZVP to evaluate nucleophilic characteristics, transition states for fluorination, relative energies, and fluorescence spectra. With the aim of exploring the potential of resazurin fluorinated derivatives as redox sensors tailored for in vivo applications, acid-base properties and partition coefficients were calculated. The theoretical characterisation has demonstrated its potential for designing novel molecules based on fundamental principles.

Standard Operating Procedure to Optimize Resazurin-Based Viability Assays.

The resazurin assay, also known as the Alamar Blue assay, stands as a cornerstone technique in cell biology, microbiology, and drug development. It assesses the viability of cells through the conversion of resazurin into highly fluorescent resorufin. The resulting fluorescence intensity provides a reliable estimate of viable cell numbers. Cytotoxicity assays, such as the resazurin-based method, play a crucial role in the screening of potential drug candidates and in the assessment of pharmaceutical and chemical toxicity. In recent years, inconsistencies have arisen in pharmacogenomic studies, often due to poorly optimized laboratory protocols. These inconsistencies hinder progress in understanding how substances affect cell health, leading to unreliable findings. Thus, the need for standardized and rigorously optimized protocols is evident to ensure consistent and accurate results in cytotoxicity studies. This manuscript describes a standardized procedure for optimizing resazurin-based viability assays to improve the reliability of cytotoxicity data. This optimization approach focuses on critical experimental parameters and data quality, aiming to achieve a level of measurement imprecision of less than 20%. In conclusion, to address the critical issues of reproducibility and reliability, protocol standardization, such as the one described in this manuscript, can greatly enhance the credibility of cytotoxicity studies, ultimately advancing drug safety assessments.

Methods for screening and evaluation of antimicrobial activity: A review of protocols, advantages, and limitations.

Infectious diseases pose a formidable global challenge, compounded by the emergence of antimicrobial resistance. Consequently, researchers are actively exploring novel antimicrobial compounds as potential solutions. This endeavor underscores the pivotal role of methods employed for screening and evaluating antimicrobial activity-a critical step in discovery and characterization of antimicrobial agents. While traditional techniques such as well-diffusion, disk-diffusion, and broth-dilution are commonly utilized in antimicrobial assays, they may encounter limitations concerning reproducibility and speed. Additionally, a diverse array of antimicrobial assays including cross-streaking, poisoned-food, co-culture, time-kill kinetics, resazurin assay, bioautography, etc., are routinely employed in antimicrobial evaluations. Advanced techniques such as flow-cytometry, impedance analysis, and bioluminescent technique may offer rapid and sensitive results, providing deeper insights into the impact of antimicrobials on cellular integrity. However, their higher cost and limited accessibility in certain laboratory settings may present challenges. This article provides a comprehensive overview of assays designed to characterize antimicrobial activity, elucidating their underlying principles, protocols, advantages, and limitations. The primary objective is to enhance understanding of the methodologies designed for evaluating antimicrobial agents in our relentless battle against infectious diseases. By selecting the appropriate antimicrobial testing method, researchers can discern suitable conditions and streamline the identification of effective antimicrobial agents.

Resazurin to determine the minimum inhibitory concentration on antifungal susceptibility assays for Fonsecaea sp. using a modified EUCAST protocol.

Chromoblastomycosis is a fungal chronic disease, which affects humans, especially in cutaneous and subcutaneous tissues. There is no standard treatment for Chromoblastomycosis, and it is a therapeutic challenge, due natural resistance of their causative agents, inadequate response of patients and common cases of relapse. Protocols for determination of antifungal drugs susceptibility are not standardized for chromoblastomycosis agents and endpoint definition is usually based on visual inspection, which depends on the analyst, making it sometimes inaccurate. We presented a colorimetric and quantitative methodology based on resazurin reduction to resofurin to determine the metabolic status of viable cells of Fonsecaea sp. Performing antifungal susceptibility assay by a modified EUCAST protocol allied to resazurin, we validated the method to identify the minimum inhibitory concentrations of itraconazole, fluconazole, amphotericin B, and terbinafine for eight Fonsecaea clinical isolates. According to our data, resazurin is a good indicator of metabolic status of viable cells, including those exposed to antifungal drugs. This work aimed to test resazurin as an indicator of the metabolic activity of Fonsecaea species in susceptibility assays to antifungal drugs. Species of this genus are the main causative agents of Chromoblastomycosis, which affects humans.

Bioburden detection on surface and water samples in a rapid, ultra-sensitive and high-throughput manner.

Bioburden detection is crucial for food, water, and biopharmaceutical applications as it can directly impact public health. The objective of this study is to develop and validate an assay and protocol for detecting bioburden on solid surfaces, as well as in water, with high sensitivity and accuracy in a rapid manner. Henceforth, a resazurin-based assay optimized for detecting bioburden has been integrated with a previously developed portable multichannel fluorometer. The microbes were isolated from solid surfaces in different laboratory settings by swabbing technique, and stream water was collected for contamination analysis. Based on the results, the assay and protocol can successfully detect bioburden as low as 20 CFU/cm2 and 10 CFU/mL present in both surface and water samples, respectively.

[Establishment and Evaluation of a Resazurin-Based Microdilution Assay for Microbial Sensitivity Test of Neisseria gonorrhoeae]. / æ·‹ç— å¥ˆç‘ŸèŒè¯æ•è¯•éªŒåˆƒå¤©é’å¾®é‡ç¨€é‡Šæ³•çš„å»ºç«‹ä¸Žè¯„ä»·.

Objective: To establish and evaluate a microbial sensitivity test method for Neisseria gonorrhoeae based on resazurin coloration. Methods: Based on the broth microdilution method, resazurin was added as a live bacteria indicator. WHO G, a WHO gonococcal reference strain, was used to optimize the incubation time for resazurin-stained bacteria and the color change was visually observed to obtain the results. Agar dilution method (the gold standard) and resazurin-based microdilution assay were used to determine the minimum inhibitory concentration (MIC) of azithromycin, ceftriaxone, and spectinomycin for 3 reference strains and 32 isolates of Neisseria gonorrhoeae. The results were analyzed based on essential agreement (EA), which reflected the consistency of the MIC values, category agreement (CA), which reflected the consistency in the determination of drug resistance, intermediary, and sensitivity, very major error (VME), which reflected false sensitivity, and major error (ME), which reflected pseudo drug resistance, to evaluate the accuracy of resazurin-based microdilution assay as a microbial sensitivity test of of Neisseria gonorrhoeae. CA and EA rates≥90% and VME and ME rates≤3% were found to be the acceptable performance rates. Results: The results obtained 6 hours after resazurin was added were consistent with those of the agar dilution method and the resazurin-based microdilution assay was established accordingly based on this parameter. The EA of resazurin-based microdilution assay for measuring the MIC results of azithromycin, ceftriaxone, and spectinomycin was 97.1%, 91.5%, and 94.3%, respectively, and the CA was 88.6%, 94.3%, and 94.3%, respectively. The VME was 0% for all three antibiotics, while the ME was 11.4%, 5.7%, and 5.7%, respectively. Conclusion: The resazurin-based microdilution assay established in this study showed good agreement with agar dilution method for measuring the MIC of antibiotics against Neisseria gonorrhoeae. Moreover, the sensitivity results of this method were highly reliable and could be easily obtained through naked eye observation. Nonetheless, the results of drug resistance should be treated with caution and the optimization of parameters should be continued.

An antioxidation-responsive SERS-active microneedle for detecting the antioxidant capacity in living organisms.

To detect the antioxidant capacity in living organisms, an antioxidation-responsive SERS-active microneedle was fabricated by adsorbing resazurin on miniature SERS substrates, SERS-active microneedles. The SERS intensity ratio of characterized peaks of resazurin and its product, resorufin, was adopted and verified as an indicator of antioxidant capacity. The feasibility of detection of the antioxidant capacity in living organisms was proved by using the fabricated SERS-active microneedles to detect the antioxidant capacity of lipopolysaccharide-induce inflammatory animal models. The fabricated SERS-active microneedles can be inserted into target soft tissues with minimal invasion to detect their antioxidant capacity. The fabricated SERS-active microneedles would be a novel tool to bring the detection of antioxidant capacity from samplings ex vivo and cells to complex tissues to promote the researches on redox biology in living organisms.

Applied Methods to Assess the Antimicrobial Activity of Metallic-Based Nanoparticles.

With the rise of antibiotic resistance, the drive to discover novel antimicrobial substances and standard testing methods with the aim of controlling transmissive diseases are substantially high. In healthcare sectors and industries, although methods for testing antibiotics and other aqueous-based reagents are well established, methods for testing nanomaterials, non-polar and other particle-based suspensions are still debatable. Hence, utilities of ISO standard validations of such substances have been recalled where corrective actions had to be taken. This paper reports a serial analysis obtained from testing the antimicrobial activities of 10 metallic-based nanomaterials against 10 different pathogens using five different in vitro assays, where the technique, limitation and robustness of each method were evaluated. To confirm antimicrobial activities of metallic-based nanomaterial suspensions, it was found that at least two methods must be used, one being the agar well diffusion method, which was found to be the most reliable method. The agar well diffusion method provided not only information on antimicrobial efficacy through the size of the inhibitory zones, but it also identified antimicrobial ions and synergistic effects released by the test materials. To ascertain the effective inhibitory concentration of nanoparticles, the resazurin broth dilution method is recommended, as MIC can be determined visually without utilising any equipment. This method also overcomes the limit of detection (LoD) and absorbance interference issues, which are often found in the overexpression of cell debris and nanoparticles or quantum dots with optical profiles. In this study, bimetallic AgCu was found to be the most effective antimicrobial nanoparticle tested against across the bacterial (MIC 7 µg/mL) and fungal (MIC 62.5 µg/mL) species.

Drug resistance and the genotypic characteristics of rpoB and katG in rifampicin- and/or isoniazid-resistant Mycobacterium tuberculosis isolates in central Vietnam.

BACKGROUND: Tuberculosis (TB) and drug-resistant TB (DR-TB) are national health burdens in Vietnam. In this study, we investigated the prevalence of rifampicin (RIF) and/or isoniazid (isonicotinic acid hydrazide, INH) resistance in patients with suspected TB, and applied appropriate techniques to help rapidly target DR-TB. METHODS: In total, 1,547 clinical specimens were collected and cultured using the BACTEC MGIT system (Becton Dickinson and Co.). A resazurin microtiter assay (REMA) was used to determine the proportions of RIF and/or INH resistance. A real-time polymerase chain reaction panel with TaqMan probes was employed to identify the mutations of rpoB and katG associated with DR-TB in clinical isolates. Genotyping of the identified mutations was also performed. RESULTS: A total of 468 Mycobacterium tuberculosis isolates were identified using the REMA. Of these isolates, 106 (22.6%) were found to be resistant to 1 or both antibiotics. Of the resistant isolates, 74 isolates (69.8%) were resistant to isoniazid (INH) only, while 1 isolate (0.94%) was resistant to RIF only. Notably, 31 isolates (29.24%) were resistant to both antibiotics. Of the 41 phenotypically INH-resistant isolates, 19 (46.3%) had the Ser315Thr mutation. There were 8 different rpoB mutations in 22 (68.8%) of the RIF-resistant isolates. The most frequently detected mutations were at codons 531 (37.5%), 526 (18.8%), and 516 (6.3%). CONCLUSION: To help prevent new cases of DR-TB in Vietnam, it is crucial to gain a comprehensive understanding of the genotypic DR-TB isolates.

Resazurin microplate test method for rapid determination of colistin resistance in carbapenem-resistant Acinetobacter baumanii isolates.

BACKGROUND: Colistin-resistant Acinetobacter baumannii isolates are extremely important pathogens for hospital-acquired infections. OBJECTIVE: To investigate the effectiveness of the resazurin microplate assay (REMA) for the rapid determination of colistin resistance. METHODS: Susceptibility for colistin was investigated in vitro by the broth microdilution method (BMD) and the resazurin microplate assay (REMA) on 106 carbapenem-resistant Acinetobacter baumannii isolates. RESULTS: The results of both test methods were compared, and the categorical agreement between them was found to be 100%. No minor, major, or very major discrepancy was observed between the 2 methods. CONCLUSIONS: The most important advantages of REMA are that the results are obtained within 6 hours compared to the reference method, that it is easy to evaluate because it is colorimetric, and that the susceptibility result can be reported to the clinician on the same day as bacterial identification.

Visible-Light-Active Iodide-Doped BiOBr Coatings for Sustainable Infrastructure.

The search for efficient materials for sustainable infrastructure is an urgent challenge toward potential negative emission technologies and the global environmental crisis. Pleasant, efficient sunlight-activated coatings for applications in self-cleaning windows are sought in the glass industry, particularly those produced from scalable technologies. The current work presents visible-light-active iodide-doped BiOBr thin films fabricated using aerosol-assisted chemical vapor deposition. The impact of dopant concentration on the structural, morphological, and optical properties was studied systematically. The photocatalytic properties of the parent materials and as-deposited doped films were evaluated using the smart ink test. An optimized material was identified as containing 2.7 atom % iodide dopant. Insight into the photocatalytic behavior of these coatings was gathered from photoluminescence and photoelectrochemical studies. The optimum photocatalytic performance could be explained from a balance between photon absorption, charge generation, carrier separation, and charge transport properties under 450 nm irradiation. This optimized iodide-doped BiOBr coating is an excellent candidate for the photodegradation of volatile organic pollutants, with potential applications in self-cleaning windows and other surfaces.

Dilution Reduces Sample Matrix Effects for Rapid, Direct, and Miniaturised Phenotypic Antibiotic Susceptibility Tests for Bovine Mastitis.

The time-consuming nature of current methods for detecting antimicrobial resistance (AMR) to guide mastitis treatment and for surveillance, drives innovation towards faster, easier, and more portable technology. Rapid on-farm testing could guide antibiotic selection, reducing misuse that contributes to resistance. We identify challenges that arise when developing miniaturized antibiotic susceptibility tests (AST) for rapid on-farm use directly in milk. We experimentally studied three factors: sample matrix (specifically milk or spoiled milk); the commensal bacteria found in fresh bovine milk; and result time on the performance of miniaturised AST. Microfluidic "dip-and-test" devices made from microcapillary film (MCF) were able to monitor Gram-negative bacterial growth colourimetrically even in the presence of milk and yoghurt (used to simulate spoiled milk samples), as long as this sample matrix was diluted 1:5 or more in growth medium. Growth detection kinetics using resazurin was not changed by milk at final concentrations of 20% or lower, but a significant delay was seen with yoghurt above 10%. The minimum inhibitory concentration (MIC) for ciprofloxacin and gentamicin was increased in the presence of higher concentrations of milk and yoghurt. When diluted to 1% all observed MIC were within range, indicating dilution may be sufficient to avoid milk matrix interfering with microfluidic AST. We found a median commensal cell count of 6 × 105 CFU/mL across 40 healthy milk samples and tested if these bacteria could alter microfluidic AST. We found that false susceptibility may be observed at early endpoint times if testing some pathogen and commensal mixtures. However, such errors are only expected to occur when a susceptible commensal organism is present at higher cell density relative to the resistant pathogen, and this can be avoided by reading at later endpoints, leading to a trade-off between accuracy and time-to-result. We conclude that with further optimisation, and additional studies of Gram-positive organisms, it should be possible to obtain rapid results for microfluidic AST, but a trade-off is needed between time-to-result, sample dilution, and accuracy.

Enhanced bioelectricity generation in thermophilic microbial fuel cell with lignocellulose as an electron donor by resazurin-mediated electron transfer.

Microbial fuel cell (MFC) with lignocellulose as an electron donor is considered a sustainable biorefinery. However, low lignocellulose degradation and energy output restrict the scale of application. Herein, the extracellular electron transfer (EET) capacity of Acetivibrio thermocellus DSM 1313 with lignocellulose as substrate was shown to be mediated by the self-produced flavin, and its intracellular electron transfer went through the whole respiratory chain. Thermophilic MFC with resazurin exhibited an increase in the open circuit voltage by 37.78%, and a 2.60 folds increase in power density of 77.85 mW/m2, respectively. Differential pulse voltammetry and electrochemical impedance spectroscopy analysis indicated that resazurin decreased the solution and anode charge transfer resistance, and enhanced the extracellular electrochemical activity. Furthermore, resazurin resulted in a lower redox potential, allowing preferential electron transfer to resazurin rather than flavin. This research establishes a resazurin-mediated thermophilic MFC with lignocellulose as substrate, which provides novel idea on the biomass refinery.