Advances in the Continuous Flow Synthesis of 3- and 4-Membered Ring Systems.

Small carbo- and heterocyclic ring systems have experienced a significant increase in importance in recent years due to their relevance in modern pharmaceuticals, as building blocks for designer materials or as synthetic intermediates. This necessitated the development of new synthetic methods for the preparation of these strained ring systems focusing on effectiveness and scalability. The high ring strain of these entities as well as the use of high-energy reagents and intermediates has often challenged their synthesis. Continuous flow approaches have thus emerged as highly effective means to safely and reliably access these strained scaffolds. In this short review, key developments in this field are summarised showcasing the power of continuous flow approaches for accessing 3- and 4-membered ring systems via thermal, photo- and electrochemical processes.

Total Synthesis of the Guangnanmycin A Alcohol.

Guangnanmycin A is a recently discovered congener of the well-known antitumor drug lead leinamycin; its macrolactam ring, however, is even more strained than that of the parent compound. The first synthetic foray towards this challenging target is reported, which relies on molybdenum-catalyzed macrocyclization by ring closing alkyne metathesis (RCAM) followed by ruthenium-catalyzed redox isomerization of the propargyl alcohol thus formed; the resulting enone enabled the introduction of the yet missing exo-methylene group by a modified Peterson olefination. The signature disulfide moiety of guangnanmycin A was installed by strain-driven thia-Michael addition followed by conversion of the thioether thus formed into an unsymmetric disulfide with the aid of (methylthio)dimethylsulfonium tetrafluoroborate and MeSSMe. While this sequence furnished racemic guangnanmycin A alcohol in good overall yield, the final oxidation to the corresponding acid failed, most likely because of the exceptional sensitivity of the strained scaffold.

Borirenes and Boriranes: Development and Perspectives.

Strained compounds constitute a highly topical area of research in chemistry. Borirene and borirane both feature a BC2 three-membered ring. They can be viewed as the structural analogues of cyclopropane and cyclopropene, where a CH2 unit of the carbonaceous counterparts is replaced with BH, respectively. Indeed, this structural variation introduces numerous intriguing aspects. For instance, borirane and borirene are both Lewis acidic due to the presence of a tricoordinate borane center. In addition, borirene is 2π aromatic according to Hückel's rule. In addition to their ability to form adducts with Lewis bases and the capacity of borirenes to act as ligands in coordination with metals, both borirenes and boriranes exhibit ring-opening reactivity due to the considerable ring strain. Under specific conditions, coordinated boriranes can even cleave two BC bonds to serve as formal borylene sources (although the reaction mechanisms are quite complex). On the other hand, recent successful syntheses of benzoborienes and their carborane-based three-dimensional analogues (also referred to as carborane-fused boriranes) have introduced novel perspectives to this field. For instance, they display excellent ring-expanding reactivity, possibly attributed to the boosted ring strain arising from the fusion of borirenes with benzene and boriranes with o-carborane. Importantly, their applications as valuable "BC2 " synthons have become increasingly evident along with the newly disclosed reactivity. Additionally, the boosted Lewis acidity of carborane-fused boriranes, thanks to the potent electron-withdrawing effect of o-carborane, combined with their readiness for ring enlargement, makes them promising candidates as electron-accepting building blocks in the construction of chemically responsive luminescent materials. This review provides a summary of the synthesis and reactivity of borirene and borirane derivatives, with the aim of encouraging the design of new borierene- and borirane-based molecules and inspiring further exploration of their potential applications.

Origin of Li+ Solvation Ability of Electrolyte Solvent: Ring Strain.

Developing new organic solvents to support the use of Li metal anodes in secondary batteries is an area of great interest. In particular, research is actively underway to improve battery performance by introducing fluorine to ether solvents, as these are highly compatible with Li metal anodes because fluorine imparts high oxidative stability and relatively low Li-ion solvation ability. However, theoretical analysis of the solvation ability of organic solvents mostly focuses on the electron-withdrawing capability of fluorine. Herein, we analyze the effect of the structural characteristics of solvents on their Li+ ion solvation ability from a computational chemistry perspective. We reveal that the structural constraints imposed on the oxygen binding sites in solvent molecules vary depending on the structural characteristics of the N-membered ring formed by the interaction between the organic solvent and Li+ ions and the internal ring containing the oxygen binding sites. We demonstrate that the structural strain of the organic solvents has a comparable effect on Li+ solvation ability seen for the electrical properties of fluorine elements. This work emphasizes the importance of understanding the structural characteristics and strain when attempting to understand the interactions between solvents and metal cations and effectively control the solvation ability of solvents.

Ring Strain Energy of Diheteropnictogeniranes El2 Pn (Pn=N, P, As, Sb)- Accurate versus Additive Approaches.

Accurate ring strain energy (RSE) values for sixty-six parent pnictogeniranes having two other identical p-block elements, El2 Pn, have been reported. A decrease in RSE was observed to correlate with an increase in the p character of the AO used in endocyclic bonds, which is particularly remarkable on descending the groups 15 and 16. The latter also parallels higher -NICS(1) values, which seems not to be related with an increase in aromaticity, as pointed out by other NICS-related criteria, but to atom-centred diatropic currents mostly arising from the presence of lone pairs. Only in case of pnictogenaditrieliranes Tr2 Pn (Tr=B, Al, Ga), the decrease of -NICS(1) is related to a lower Hückel-type 2π-electron aromaticity on descending group 13. The use of an additive methodology based on atom-strain contributions enables estimation of RSEs for a large majority of all possible three-membered rings containing group 13-16 elements with modest accuracy (RMSE=4.371 kcal/mol), that could be remarkably improved by using bond-strain contributions (RMSE=1.183 kcal/mol) instead.

Strain-Driven, Non-Catalysed Ring Expansion of Silicon Heterocycles.

Silacycles are ubiquitous building blocks. Small silacycles can typically be expanded catalytically. A silirane, silirene and phosphasilirene as well as a siletane and a silolene were prepared starting from the base-free bromosilylene [(dtbp Cbz)SiBr] (dtbp Cbz=1,8-bis(3,5-ditertbutylphenyl)-3,6-ditertbutylcarbazolyl). As these heterocycles were derived from a dicoordinated silylene, they are susceptible to reactions with an external base. The three-membered silacycles readily undergo non-catalysed ring expansion reactions with isonitriles yielding the related four-membered silacycles. Surprisingly, the ring-expanded derivatives of the silirane undergo up to two further isomerisation reactions, first by enamine formation and then by another ring expansion. DFT computations were utilised to gauge the scope of this reactivity pattern. Three-membered silacycles should essentially universally undergo a ring expansion with isonitriles, while for four-membered silacycles, only very few instances are predicted to accommodate more challenging kinetic requirements of this ring expansion. Larger silacycles lack the ring strain energy required for this ring expansion reaction and are not expected to be expanded.

SN 2 versus E2 Competition of Cyclic Ethers.

We have quantum chemically studied the influence of ring strain on the competition between the two mechanistically different SN 2 and E2 pathways using a series of archetypal ethers as substrate in combination with a diverse set of Lewis bases (F- , Cl- , Br- , HO- , H3 CO- , HS- , H3 CS- ), using relativistic density functional theory at ZORA-OLYP/QZ4P. The ring strain in the substrate is systematically increased on going from a model acyclic ether to a 6- to 5- to 4- to 3-membered ether ring. We have found that the activation energy of the SN 2 pathway sharply decreases when the ring strain of the system is increased, thus on going from large to small cyclic ethers, the SN 2 reactivity increases. In contrast, the activation energy of the E2 pathway generally rises along this same series, that is, from large to small cyclic ethers. The opposing reactivity trends induce a mechanistic switch in the preferred reaction pathway for strong Lewis bases from E2, for large cyclic substrates, to SN 2, for small cyclic substrates. Weak Lewis bases are unable to overcome the higher intrinsic distortivity of the E2 pathway and, therefore, always favor the less distortive SN 2 reaction.

Cyclotetrabenzil Derivatives for Electrochemical Lithium-Ion Storage.

Organic electrode materials could revolutionize batteries because of their high energy densities, the use of Earth-abundant elements, and structural diversity which allows fine-tuning of electrochemical properties. However, small organic molecules and intermediates formed during their redox cycling in lithium-ion batteries (LIBs) have high solubility in organic electrolytes, leading to rapid decay of cycling performance. We report the use of three cyclotetrabenzil octaketone macrocycles as cathode materials for LIBs. The rigid and insoluble naphthalene-based cyclotetrabenzil reversibly accepts eight electrons in a two-step process with a specific capacity of 279 mAh g-1 and a stable cycling performance with ≈65 % capacity retention after 135 cycles. DFT calculations indicate that its reduction increases both ring strain and ring rigidity, as demonstrated by computed high distortion energies, repulsive regions in NCI plots, and close [C⋅⋅⋅C] contacts between the naphthalenes. This work highlights the importance of shape-persistency and ring strain in the design of redox-active macrocycles that maintain very low solubility in various redox states.

Boosting Ring Strain and Lewis Acidity of Borirane: Synthesis, Reactivity and Density Functional Theory Studies of an Uncoordinated Arylborirane Fused to o-Carborane.

Among the parent borirane, benzoborirene and ortho-dicarbadodecaborane-fused borirane, the latter possesses the highest ring strain and the highest Lewis acidity according to our density functional theory (DFT) studies. The synthesis of this class of compounds is thus considerably challenging. The existing examples require either a strong π-donating group or an extra ligand for B-coordination, which nevertheless suppresses or completely turns off the Lewis acidity. The title compound, which possesses both features, not only allows the 1,2-insertion of P=O, C=O or C≡N to proceed under milder conditions, but also enables the heretofore unknown dearomative 1,4-insertion of Ar-(C=O)- into a B-C bond. The fusion of strained molecular systems to an o-carborane cage shows great promise for boosting both the ring strain and acidity.

Simultaneous Enhancement of the Mechanical Properties, Performance and Insensitivity of an Energetic Elastomeric Polyurethane Binder by Kinetically Grafting Reactive Spiranes.

A series of robust energetic polyurethane binders was developed by in situ grafting reactive spiranes to achieve the migration-resistant processing aid and compensate for the energy output. The reactive grafting spiranes (RGSs), bearing two highly ring-strained spiranes, were synthesized sequentially to provide a promising ring strain energy up to a maximum value of 290 kJ mol-1. The thermodynamic compatibility of the RGS with uncured glycidyl azido polymer (GAP) was studied quantitatively by analyzing the glass transition temperature of their blendings. The reactivity study of the catalyst-free click reaction with respect to spacer-dependent species was amplified by tracing the extent of the reaction and measuring the activation energy. The faster reactivity of propargyl species was evident from two experimental approaches, which were verified further by theoretical predictions. Interestingly, the energy gap difference in the frontier molecular orbitals agreed well with the difference in activation energy between the two types of spacer-dependent species. The mechanical and thermochemical enhancements of GAP-based polyurethane with RGS were basically gained from those highly ring-strained moieties.

Dibenzo[b,f][1,4,5]chalcogenadiazepine Photoswitches: Conversion of Excitation Energy into Ring Strain.

Tetra-ortho-substituted, heteroaryl and cyclic azobenzenes have emerged as three key strategies on morphology design of photoswitch to diversify controllability. Cyclic azobenzene is of particular utilization in photo-energy conversion due to rigid and ring-strain structure. Despite the well-recognized diazocine, the photo-switching properties of seven-membered cyclic azobenzenes (diazepines) have yet been exploited. Herein, we report a family of dibenzo[b,f][1,4,5]chalcogenadiazepines (DBChDs) and their T-type photo-switching nature with tunable relaxation rate. Based on experiments together with DFT calculations, we found that an unsymmetric 2-bithiophenyl-dibenzo[b,f][1,4,5]thiadiazepine exhibited an efficient response to 445 nm laser stimulation (quantum efficiency, ΦZ→E =0.71) with millisecond relaxation half-life (t1/2 =40 ms). Photo-energy transduction efficiency was also exceptionally high with 29.1 % converted into ring-strain energy mainly loaded on azo π-bond.

Metal-Free Catalysis in C-C Single-Bond Cleavage: Achievements and Prospects.

This review article emphasizes the C-C bond cleavage in organic synthesis via metal-free approach. Conventional organic synthesis mainly deals with the reactive π bonds and polar σ bonds. In contrast, the ubiquitous C-C single bonds are inherently stable and are less reactive, which poses a challenge to synthetic chemists. Although inert, such C-C single-bond cleavage reactions have gained attention amongst synthetic chemists, as they provide unique and more straightforward routes, with significantly fewer steps. Several review articles have been reported regarding the activation and cleavage of C-C bonds using different transition metals. However, given the high cost and toxicity of many of these metals, the development of strategies under metal-free conditions is of utmost importance. Though many research articles have been published in this area, no review article has been reported so far. Herein, we discuss the reactions in a more concise way from the year 2012 to today, with emphasis on important reactions. Mechanisms of all the reactions are also well addressed. We believe that this review will be beneficial for the readers who work in this field.

The Effects of Ring Strain on Cyclic Tetraaryl[5]cumulenes.

Cyclic tetraaryl[5]cumulenes (1 a-f) have been synthesized and studied as a function of increasing ring strain. The magnitude of ring strain is approximated by the extent of bending of the cumulenic core as assessed by a combination of X-ray crystallographic analysis and DFT calculations. Trends are observed in 13 C NMR, UV-vis, and Raman spectra associated with ring strain, but the effects are small. In particular, the experimental HOMO-LUMO gap is not appreciably affected by bending of the [5]cumulene framework from ca. 174° (λmax =504 nm) in 1 a to ca. 178° (λmax =494 nm) in 1 f.

Composite Correlated Molecular Orbital Theory Calculations of Ring Strain for Use in Predicting Polymerization Reactions.

Strained ring systems play an important role in synthesis and can be characterized by the ring strain energy (RSE). The RSE of 3, 4, 5, and 6 membered saturated and unsaturated ring systems containing N, O, P, and S heteroatoms and H, F, SiMe3 , and SO2 Me substituents were calculated at the G3(MP2) composite correlated molecular orbital theory level using up to 5 models to predict the RSE. Generally, the RSE decreased as ring size increased with a substantial decrease from 4 to 5 membered rings. Replacement of a ring CH2 with P or S reduced the RSE, consistent with less angle strain. The RSE for unsaturated systems were generally greater than for saturated systems due to increased angle strain. No general trends were found with respect to substituent effects. The RSE values suggest that 3-pyrroline and 2-pyrroline and their derivatives may be able to support ring opening metathesis polymerization and warrant further study.

Vinylcyclopropane [3+2] Cycloaddition with Acetylenic Sulfones Based on Visible Light Photocatalysis.

The first intermolecular visible light [3+2] cycloaddition reaction performed on a meta photocycloadduct employing acetylenic sulfones is described. The developed methodology exploits the advantages of combining UV and visible-light in a two-step sequence that provides a photogenerated cyclopropane which, through a strain-release process, generates a new cyclopentane ring while significantly increasing the molecular complexity. Mechanistic studies and DFT calculations indicate an energy transfer pathway for the visible light-driven reaction step. This strategy could be extended to simpler vinylcyclopropanes.

Azetidines of pharmacological interest.

Azetidines are almost unexplored among nitrogen-containing saturated heterocycles due to difficulties associated with their synthesis. However, over the past few years, attempts have been made by scientists to advance their synthetic feasibility. Compounds with the azetidine moiety display an important and diverse range of pharmacological activities, such as anticancer, antibacterial, antimicrobial, antischizophrenic, antimalarial, antiobesity, anti-inflammatory, antidiabetic, antiviral, antioxidant, analgesic, and dopamine antagonist activities, and are also useful for the treatment of central nervous system disorders and so forth. Owing to its satisfactory stability, molecular rigidity, and chemical and biological properties, azetidine has emerged as a valuable scaffold and it has drawn the attention of medicinal researchers. The present review sheds light on the traditional method of synthesis of azetidine and advancements in synthetic methodology over the past few years, along with its application with various examples, and its biological significance.

Intramolecular Nicholas Reaction Enables the Stereoselective Synthesis of Strained Cyclooctynes.

Cyclic products can be obtained through the intramolecular version of the Nicholas reaction, which requires having the nucleophile connected to the alkyne unit. Here, we report the synthesis of 1-oxa-3-cyclooctynes starting from commercially available (1R,3S)-camphoric acid. The strategy is based on the initial preparation of propargylic alcohols, complexation of the triple bond with Co2(CO)8, and treatment with BF3·Et2O to induce an intramolecular Nicholas reaction with the free hydroxyl group as nucleophile. Finally, oxidative deprotection of the alkyne afforded the cyclooctynes in good yields. Notably, large-sized R substituents at the chiral center connected to the O atom were oriented in such a way that steric interactions were minimized in the cyclization, allowing the formation of cyclooctynes exclusively with (R) configuration, in good agreement with theoretical predictions. Moreover, preliminary studies demonstrated that these cyclooctynes were reactive in the presence of azides yielding substituted triazoles.

Redox reactions of organoselenium compounds: Implication in their biological activity.

Antioxidant activity of organoselenium compounds belonging to different classes i.e. functionalized aliphatic, aromatic and cyclic selenoethers, are compared on the basis of their ability to scavenge reactive oxygen species like hydroxyl and peroxyl radicals and to exhibit glutathione peroxidase (GPx) like catalytic activity. The comparative analysis has revealed that the antioxidant activity of the organoselenium compounds show direct correlation with the energy of the highest occupied molecular orbital (HOMO) and neighboring group participation that stabilizes the reaction intermediate. Finally, structural features responsible for improving the rate of reaction of organoselenium compounds with free radical/molecular oxidants have been discussed on the basis of the compounds screened at our institute.

Large Polyhedral Oligomeric Silsesquioxane Cages: The Isolation of Functionalized POSS with an Unprecedented Si18 O27 Core.

The synthesis of organo-functionalized polyhedral oligomeric silsesquioxanes (POSS, (R-SiO1.5 )n , Tn ) is an area of significant activity. To date, T14 is the largest such cage synthesized and isolated as a single isomer. Herein, we report an unprecedented, single-isomer styryl-functionalized T18 POSS. Unambiguously identified among nine possible isomers by multinuclear solution NMR (1 H, 13 C, and 29 Si), MALDI-MS, FTIR, and computational studies, this is the largest single-isomer functionalized Tn compound isolated to date. A ring-strain model was developed to correlate the 29 Si resonances with the number of 6-, 5-, and/or 4-Si-atom rings that each non-equivalent Si atom is part of. The model successfully predicts the speciation of non-equivalent Si atoms in other families of Tn compounds, demonstrating its general applicability for assigning 29 Si resonances to Si atoms in cage silsesquioxanes and providing a useful tool for predicting Si-atom environments.

Strain-Induced Nucleophilic Ring Opening of Donor-Acceptor Cyclopropenes for Synthesis of Monosubstituted Succinic Acid Derivatives.

1,2,3-Trisubstituted donor-acceptor cyclopropenes (DACPs) generated in situ from enoldiazo compounds react with nucleophiles to form α-substituted succinic acid derivatives in high yields. Initial dirhodium(II) carboxylate catalysis rapidly converts enoldiazo-acetates or -acetamides to DACPs that undergo catalyst-free Favorskii ring opening with amines, and also with anilines, alcohols, and thiols, when facilitated by catalytic amounts of 4-dimethylaminopyridine (DMAP). This methodology provides easy access to mixed esters and amides of monosubstituted succinic acids, including derivatives of naturally occurring compounds. It also affords dihydrazide, dihydroxamic acid, and diamide derivatives, as well as α-substituted tetrahydropyridazine-3,6-diones in high yields. Attempts to generate optically enriched DACPs were not successful because their populations having the R and S configurations formed with a chiral dirhodium catalyst are quite similar, and the loss of enantiocontrol likely originates from the DACP ring forming step which is reversible with its intermediate metal carbene.