RESUMO
CONTEXT: Myocardial infarction is one of the major health challenges. It is of great significance to develop potential delivery carriers for new anti-myocardial infarction drugs. In this paper, based on first-principles calculations, monolayer WS2 with excellent photoelectric properties was verified as a carrier for the anti-myocardial infarction drug amiodarone (AMD). Studies have shown that the WS2-adsorbed AMD system (WS2@AMD) maintains structural stability and produces an adsorption energy of-2.12 eV. Mulliken charge analysis shows that electrons are transferred from WS2 atoms to AMD atoms. Among them, C, N and O obtained the maximum values of 0.51,0.37 and 0.56 e electrons, respectively, while H and I lost the maximum values of 0.32 and 0.24 e electrons, respectively. The optical response of WS2 adsorbed AMD system is similar to that of WS2. The light absorption coefficients of the two materials in the near ultraviolet region and the visible region can reach the order of 105 cm-1 and 104 cm-1, and the strain makes the light absorption peak red-shifted. The feasibility of temperature-controlled release mechanism of WS2 as AMD carrier was discussed. This theoretical work helps to improve the performance of two-dimensional nanomaterials and make them better as drug delivery carriers to improve the therapeutic effect of myocardial infarction. These results indicate that the WS2 monolayer has potential applications in the development of drug delivery carriers. METHODS: In this study, based on first-principles calculations, the CASTEP simulation software package was used to study the structure and properties of materials. The interaction between electrons and ions is considered by using Ultrasoft pseudopotentials. In order to eliminate the spurious interaction between adjacent structures caused by periodic calculations, a vacuum space no less than 18 Å is placed in the vertical direction if necessary. Different functions may produce different density functional calculation results. Due to the low sensitivity of the crystal structure to the calculation details, the PBE functional under the generalized gradient approximation (GGA) was initially used for structural optimization, and the energy cutoff value was set to 500 eV. Grimme 's dispersion correction was used to make the results more accurate. The Brillouin zone (BZ) is sampled by a 7 × 7 × 1 K-point grid to ensure the reliability of the original lattice calculation. The lattice vector and atomic coordinates are relaxed, and the tolerance of each atom is less than 0.01 eV/Å. The energy tolerance at the atomic position is less than 10-7 eV/atom. When calculating the band gap, the HSE06 hybrid functional is used to modify the optimized structure of the PBE functional to obtain more accurate results. Spin-polarized DFT calculations were performed to calculate the electronic structure.
Assuntos
Portadores de Fármacos , Infarto do Miocárdio , Infarto do Miocárdio/tratamento farmacológico , Portadores de Fármacos/química , Modelos Moleculares , Compostos de Tungstênio/química , Adsorção , Sistemas de Liberação de MedicamentosRESUMO
Prolonged sitting can easily result in pressure injury (PI) for certain people who have had strokes or spinal cord injuries. There are not many methods available for tracking contact surface pressure and shear force to evaluate the PI risk. Here, we propose a smart cushion that uses two-dimensional force sensors (2D-FSs) to measure the pressure and shear force in the buttocks. A machine learning algorithm is then used to compute the shear stresses in the gluteal muscles, which helps to determine the PI risk. The 2D-FS consists of a ferroelectret coaxial sensor (FCS) unit placed atop a ferroelectret film sensor (FFS) unit, allowing it to detect both vertical and horizontal forces simultaneously. To characterize and calibrate, two experimental approaches are applied: one involves simultaneously applying two perpendicular forces, and one involves applying a single force. To separate the two forces, the 2D-FS is decoupled using a deep neural network technique. Multiple FCSs are embedded to form a smart cushion, and a genetic algorithm-optimized backpropagation neural network is proposed and trained to predict the shear strain in the buttocks to prevent PI. By tracking the danger of PI, the smart cushion based on 2D-FSs may be further connected with home-based intelligent care platforms to increase patient equality for spinal cord injury patients and lower the expense of nursing or rehabilitation care.
Assuntos
Aprendizado de Máquina , Úlcera por Pressão , Úlcera por Pressão/prevenção & controle , Humanos , Nádegas , Medição de Risco , Pressão , Redes Neurais de Computação , AlgoritmosRESUMO
Electrochemical nitrate reduction method (NitRR) is a low-carbon, environmentally friendly, and efficient method for synthesizing ammonia, which has received widespread attention in recent years. Copper-based catalysts have a leading edge in nitrate reduction due to their good adsorption of *NO3. However, the formation of active hydrogen (*H) on Cu surfaces is difficult and insufficient, resulting in a large amount of the by-product NO2-. In this work, Pd single atoms suspended on the interlayer unsaturated bonds of CuO atoms formed due to dislocations (Pd-CuO) were prepared by low temperature treatment, and the Pd single atoms located on the dislocations were subjected to shear stress and the dynamic effect of support formation to promote the conversion of nitrate into ammonia. The catalysis had an ammonia yield of 4.2 mol.gcat-1. h-1, and a Faraday efficiency of 90% for ammonia production at -0.5 V vs. RHE. Electrochemical in-situ characterization and theoretical calculations indicate that the dynamic effects of Pd single atoms and carriers under shear stress obviously promote the production of active hydrogen, reduce the reaction energy barrier of the decision-making step for nitrate conversion to ammonia, further promote ammonia generation.
RESUMO
BACKGROUND: Dysfunctional gliding of deep fascia and muscle layers forms the basis of myofascial pain and dysfunction, which can cause chronic shoulder pain. Ultrasound shear strain imaging may offer a non-invasive tool to quantitatively evaluate the extent of muscular dysfunctional gliding and its correlation with pain. This case study is the first to use ultrasound shear strain imaging to report the shear strain between the pectoralis major and minor muscles in shoulders with and without chronic pain. CASE PRESENTATION: The shear strain between the pectoralis major and minor muscles during shoulder rotation in a volunteer with chronic shoulder pain was measured with ultrasound shear strain imaging. The results show that the mean ± standard deviation shear strain was 0.40 ± 0.09 on the affected side, compared to 1.09 ± 0.18 on the unaffected side (p<0.05). The results suggest that myofascial dysfunction may cause the muscles to adhere together thereby reducing shear strain on the affected side. CONCLUSION: Our findings elucidate a potential pathophysiology of myofascial dysfunction in chronic shoulder pain and reveal the potential utility of ultrasound imaging to provide a useful biomarker for shear strain evaluation between the pectoralis major and minor muscles.
Assuntos
Dor Crônica , Dor de Ombro , Ultrassonografia , Humanos , Dor de Ombro/diagnóstico por imagem , Dor de Ombro/fisiopatologia , Dor de Ombro/etiologia , Dor Crônica/diagnóstico por imagem , Dor Crônica/fisiopatologia , Ultrassonografia/métodos , Síndromes da Dor Miofascial/diagnóstico por imagem , Síndromes da Dor Miofascial/fisiopatologia , Adulto , Masculino , Músculos Peitorais/diagnóstico por imagem , Músculos Peitorais/fisiopatologia , Feminino , Resistência ao CisalhamentoRESUMO
Hypermobility of the trapeziometacarpal joint is commonly considered to be a potential risk factor for osteoarthritis. Nevertheless, the results remain controversial due to a lack of quantitative validation. The objective of this study was to evaluate the effect of joint laxity on the mechanical loadings of cartilage. A patient-specific finite element model of trapeziometacarpal joint passive stiffness was developed. The joint passive stiffness was modeled by creating linear springs all around the joint. The linear spring stiffness was determined by using an optimization process to fit force-displacement data measured during laxity tests performed on eight healthy volunteers. The estimated passive stiffness parameters were then included in a full thumb finite element simulation of a pinch grip task driven by muscle forces to evaluate the effect on trapeziometacarpal loading. The correlation between stiffness and the loading of cartilage in terms of joint contact pressure and maximum shear strain was analyzed. A significant negative correlation was found between the trapeziometacarpal joint passive stiffness and the contact pressure on trapezium cartilage during the simulated pinch grip task. These results therefore suggest that the hypermobility of the trapeziometacarpal joint could affect the contact pressure on trapezium cartilage and support the existence of an increased risk associated with hypermobility.
Assuntos
Cartilagem Articular , Osteoartrite , Trapézio , Humanos , Polegar/fisiologia , Trapézio/fisiologia , Força da MãoRESUMO
CONTEXT: This study investigates the dynamic stability of monolayers MoS2, WS2, and MoS2/WS2 van der Waals heterostructures (vdWHs) and the influence of shear strain on their electronic properties. The computational results of the binding energy and phonon dispersion demonstrate the excellent dynamic stability of MoS2/WS2 vdWHs. The MoS2/WS2 vdWH, with a type-II band alignment and an indirect bandgap, reduces electron-hole recombination, enhancing the efficiency and performance of optoelectronic devices. Under shear strain, the bandgap size and type of monolayers MoS2, WS2, and MoS2/WS2 vdWHs were effectively modulated, along with the interlayer charge redistribution in the MoS2/WS2 vdWHs. This work reveals the tunability of the electronic properties of monolayers MoS2, WS2, and MoS2/WS2 vdWHs under shear strain, offering new possibilities and solutions for developing optoelectronic devices, sensors, and related fields. METHODS: This work employed the CASTEP module within the Materials Studio software package for first-principles calculations. Ultrasoft pseudopotentials were employed during geometry optimizations to account for ion-electron interactions using the GGA-PBE functional for exchange-correlation potentials. The electronic configurations of the S, Mo, and W atoms were chosen as their typical arrangements: (3s2p4), (4s2p6d55s1), and (5s2p6d46s2), respectively. A vacuum layer of 20 Å was added to avoid interactions between the atomic layers. A cutoff energy of 500 eV was set for structural optimization and self-consistent calculations, with k-point grids of 6 × 6 × 1 and 9 × 9 × 1. During the structural optimization process, the energy convergence criterion was set to 1 × 10-5 eV, and the thresholds for interatomic forces and stresses were set to 0.01 eV/Å and 0.01 GPa, respectively. Grimmer's DFT-D2 correction accounted for the interlayer vdW interactions in the MoS2/WS2 vdWH, while the phonon dispersion was calculated using the linear response method.
RESUMO
Solute clusters are one of the important mechanisms of irradiation embrittlement of ferritic steels. It is of great significance to study the stability of solute clusters in ferritic steels and their effects on the mechanical properties of the materials. Molecular dynamics was used to study the binding energy, defect energy, and interaction energy of 2 nm-diameter Cu-Ni clusters in the ferritic lattice, which have six categories of Cu-Ni clusters, such as the pure Cu cluster, the core-shell structural cluster with one layer to four layers of Ni atoms and the pure Ni cluster. It was found that Cu-Ni clusters have lower energy advantages than pure Ni clusters. Through shear strain simulation of the three clusters, the structure of 2 nm diameter clusters does not undergo phase transformation. The number of slip systems and the length of dislocation lines in the cluster system are positively correlated with the magnitude of the critical stress of material plastic deformation.
RESUMO
Extrusion-based polymer 3D printing induces shear strains within the material, influencing its rheological and mechanical properties. In materials like polyvinylidene difluoride (PVDF), these strains stretch polymer chains, leading to increased crystallinity and improved piezoelectric properties. This study demonstrates a 400% enhancement in the piezoelectric property of extrusion-printed PVDF by introducing additional shear strains during the printing process. The continuous torsional shear strains, imposed via a rotating extrusion nozzle, results in additional crystalline ß-phases, directly impacting the piezoelectric behavior of the printed parts. The effect of the nozzle's rotational speed on the amount of ß-phase formation is characterized using FTIR. This research introduces a new direction in the development of polymer and composite 3D printing, where in-process shear strains are used to control the alignment of polymer chains and/or in-fill phases and the overall properties of printed parts.
RESUMO
Contra-rotating fans (CRFs) have garnered significant attention due to their higher power-to-weight ratio compared to traditional fans; however, limited focus has been given to the localization and development of local aerodynamic losses. Furthermore, there is a need for further research on the impact of load distribution along the radius on local entropy production. Therefore, this study aims to investigate a contra-rotating fan as the research subject. An optimal design for load distribution along the radius is achieved by constructing a surrogate model in combination with a genetic algorithm. The effectiveness of this design has been verified through experimentation using a specific test device. In this study, a local entropy production rate (EPR) model adapted to the shear stress transport-detached eddy simulation (SST-DES) technique is constructed to evaluate the loss distribution of the contra-rotating fan. This paper primarily focuses on comparing and analyzing the blade profile and overall performance of the CRFs before and after optimization. The EPR contribution of each interval along the radius is compared to the corresponding blade channel to identify the approximate range of high-EPR regions. Furthermore, an investigation is conducted to examine the distribution of EPR along the streamwise direction in these high-EPR regions. After that, by comparing the development of the flow structure near a stall before and after optimization, combined with the analysis of the EPR contours, the EPR mechanism of this CRF is revealed.
RESUMO
It is generally acknowledged that the stability evaluation of surrounding rock denotes nonlinear complex system engineering. In order to accurately and quantitatively assess the safety states of surrounding rock and provide a scientific basis for the prevention and control of surrounding rock stability, the analysis method of the synergetic theory of information entropy using the failure approach index has been proposed. By means of deriving the general relationship between the total two-dimensional plastic shear strain and the total three-dimensional plastic shear strain and obtaining the numerical limit analysis step of the plastic shear strain, the threshold value of the ultimate plastic shear strain can be determined, which has provided the key criterion for the calculation of the information entropy based on the failure approach index. In addition, combining with the synergetic theory of the principle of maximum information entropy, the evolution equation of the excavation step and information entropy based on the failure approach index of the surrounding rock system in underground mining space are established, and the equations of the general solution and particular solution as well as the expression of the destabilizing excavation step are given. To account for this, the method is applied to analyze the failure states of the floor surrounding rock after the mining of the 71 coal seam in Xutuan Coal Mine and involve the disturbance effect and stability control method of the underlying 72 coal seam roof from the macroscopic and microscopic aspects. Consequently, the validity of the analysis method of synergetic theory of information entropy based on the failure approach index has been verified, which presents an updated approach for the stability evaluation of surrounding rock systems that is of satisfactory capability and value in engineering applications.
RESUMO
The Head Impulse Test, the most widely accept test to assess the vestibular function, comprises rotations of the head based on idealized orientations of the semicircular canals, instead of their individual arrangement specific for each patient. In this study, we show how computational modelling can help personalize the diagnosis of vestibular diseases. Based on a micro-computed tomography reconstruction of the human membranous labyrinth and their simulation using Computational Fluid Dynamics and Fluid-Solid Interaction techniques, we evaluated the stimulus experienced by the six cristae ampullaris under different rotational conditions mimicking the Head Impulse Test. The results show that the maximum stimulation of the crista ampullaris occurs for directions of rotation that are more aligned with the orientation of the cupulae (average deviation from alignment of 4.7°, 9.8°, and 19.4° for the horizontal, posterior, and superior maxima, respectively) than with the planes of the semicircular canals (average deviation from alignment of 32.4°, 70.5°, and 67.8° for the horizontal, posterior, and superior maxima, respectively). A plausible explanation is that when rotations are applied with respect to the center of the head, the inertial forces acting directly over the cupula become dominant over the endolymphatic fluid forces generated in the semicircular canals. Our results indicate that it is necessary to consider cupulae orientation to ensure optimal conditions for testing the vestibular function.
Assuntos
Simulação por Computador , Teste do Impulso da Cabeça , Ductos Semicirculares , Humanos , Ductos Semicirculares/diagnóstico por imagem , Canais Semicirculares , Microtomografia por Raio-X , Doenças Vestibulares , Medicina de PrecisãoRESUMO
Slip avalanches are ubiquitous phenomena occurring in three-dimensional materials under shear strain, and their study contributes immensely to our understanding of plastic deformation, fragmentation, and earthquakes. So far, little is known about the role of shear strain in two-dimensional (2D) materials. Here we show some evidence of 2D slip avalanches in exfoliated rhombohedral MoS2, triggered by shear strain near the threshold level. Utilizing interfacial polarization in 3R-MoS2, we directly probe the stacking order in multilayer flakes and discover a wide variety of polarization domains with sizes following a power-law distribution. These findings suggest that slip avalanches can occur during the exfoliation of 2D materials, and the stacking orders can be changed via shear strain. Our observation has far-reaching implications for the development of new materials and technologies, where precise control over the atomic structure of these materials is essential for optimizing their properties as well as for our understanding of fundamental physical phenomena.
RESUMO
The role of mechanical stimuli in promoting endochondral ossification during somatic growth and maturation remains an active area of research. This study employs a pisiform model of endochondral ossification to investigate the potential role of mechanobiological signals in the appearance and development of ossification centers and to develop theoretical applications to the primate basicranium. We constructed finite element models based on the structure of a human pisiform within the flexor carpi ulnaris tendon. The pisiform was assigned initial material properties of hyaline cartilage, and tendon properties were based on in situ observations drawn from the literature. A macaque growth model was used to simulate increased load over time as a function of body mass. A load case of uniaxial tension from the tendon was applied over 208 iterations, to simulate weekly growth over a 4-year span. The mechanical signal was defined as shear stress. Element stresses were evaluated in each iteration, with elements exceeding the yield threshold subsequently assigned a higher elastic modulus to mimic mechanically driven mineralization. Three unique mineralization rates were tested. Regardless of rate, all ossification simulations predict a pisiform with heterogeneous stiffness through alternating periods of material stasis and active mineralization/ossification. Assuming metabolic processes underlying endochondral ossification are similar throughout the body, our model suggests that a mechanical signal alone is an insufficient stimulus in the etiology of bone formation through endochondral ossification. Consequently, given the general validity of the simulation, endochondral ossification cannot be fully explained in terms of mechanical stimuli.
RESUMO
BACKGROUND: Differential movement, or shear strain (SS), between layers of thoracolumbar fascia is reduced with chronic low back pain. To provide a foundation for clinical research involving SS, this study assessed temporal stability and the effect of paraspinal muscle contraction on SS in persons with chronic low back pain. METHODS: We used ultrasound imaging to measure SS in adults self-reporting low back pain ≥1 year. Images were obtained by placing a transducer 2-3 cm lateral to L2-3 with participants lying prone and relaxed on a table moving the lower extremities downward 15°, for 5 cycles at 0.5 Hz. To assess paraspinal muscle contraction effects, participants raised the head slightly from the table. SS was calculated using 2 computational methods. Method 1 averaged the maximum SS from each side during the third cycle. Method 2 used the maximum SS from any cycle (2-4) on each side, prior to averaging. SS was also assessed after a 4-week no manual therapy period. RESULTS: Of 30 participants (n = 14 female), mean age was 40 years; mean BMI 30.1. Mean (SE) SS in females with paraspinal muscle contraction was 66% (7.4) (method 1) and 78% (7.8) (method 2); 54% (6.9) (method 1) and 67% (7.3) (method 2) in males. With muscles relaxed, mean SS in females was 77% (7.6) (method 1) or 87% (6.8) (method 2); 63% (7.1) (method 1) and 78% (6.4) (method 2) in males. Mean SS decreased 8-13% in females and 7-13% in males after 4-weeks CONCLUSION: Mean SS in females was higher than males at each timepoint. Paraspinal muscle contraction temporarily reduced SS. Over a 4-week no-treatment period, mean SS (with paraspinal muscles relaxed) decreased. Methods less likely to induce muscle guarding and enabling assessment with broader populations are needed.
Assuntos
Dor Lombar , Adulto , Masculino , Humanos , Feminino , Músculos Paraespinais/diagnóstico por imagem , Músculos Paraespinais/fisiologia , Estudos de Viabilidade , Contração Muscular/fisiologia , Fáscia/diagnóstico por imagem , Fáscia/fisiologiaRESUMO
INTRODUCTION: The aim of this study is to analyze the muscle kinematics of the medial gastrocnemius (MG) during submaximal isometric contractions and to explore the relationship between deformation and force generated at plantarflexed (PF), neutral (N) and dorsiflexed (DF) ankle angles. METHOD: Strain and Strain Rate (SR) tensors were calculated from velocity-encoded magnetic resonance phase-contrast images in six young men acquired during 25% and 50% Maximum Voluntary Contraction (MVC). Strain and SR indices as well as force normalized values were statistically analyzed using two-way repeated measures ANOVA for differences with force level and ankle angle. An exploratory analysis of differences between absolute values of longitudinal compressive strain (Eλ1) and radial expansion strains (Eλ2) and maximum shear strain (Emax) based on paired t-test was also performed for each ankle angle. RESULTS: Compressive strains/SRs were significantly lower at 25%MVC. Normalized strains/SR were significantly different between %MVC and ankle angles with lowest values for DF. Absolute values of Eλ2 and Emax were significantly higher than Eλ1 for DF suggesting higher deformation asymmetry and higher shear strain, respectively. CONCLUSIONS: In addition to the known optimum muscle fiber length, the study identified two potential new causes of increased force generation at dorsiflexion ankle angle, higher fiber cross-section deformation asymmetry and higher shear strains.
Assuntos
Tornozelo , Contração Isométrica , Masculino , Humanos , Tornozelo/fisiologia , Contração Isométrica/fisiologia , Músculo Esquelético/diagnóstico por imagem , Músculo Esquelético/fisiologia , Pressão , Imageamento por Ressonância Magnética/métodosRESUMO
BACKGROUND AND OBJECTIVE: The threads, as the most critical component of dental implants, transfer the imposed occlusal loads to the adjacent bone. Moreover, regulation of the mechanical stimuli in the implant adjacent bone is crucial to maximize the bone-implant construct stability. An optimal thread design can be resulted when the distribution of mechanical stimuli within the bone, and at the implant-bone interface, lie in an advised confined range. In this work, with the goal of finding the optimal thread design, which can provide the maximum level of stability, the effects of thread parameters, namely, thread depth, thread width, and thread pitch, together with upper and lower thread angles, on maximum principal strain within the cortical and cancellous bone, and shear strain at the implant-bone interface, were investigated. METHODS: In this study, the response surface methodology (RSM), due to the central composite design (CCD), was employed to obtain a set of 53 experiments. Following that, they were numerically simulated using the finite element method (FEM). The polynomial regression model was then used to predict the response functions based on the magnitude of thread parameters. The effectiveness of each thread parameter was also evaluated through statistical tools. Moreover, the non-dominated sorting genetic algorithm (NSGA-II) was performed to find the optimum dimensions of the thread. RESULTS: Through comparing the results obtained from analyzing initial and optimized configuration of threads, it was shown that the latter causes a reduction in the maximum principal strains in cancellous and cortical bones by about 25% and 30%, respectively, which is in favor of making a higher quality bone, and thus greater stability in dental implant-bone construct. Moreover, the maximum shear strains at the implant-bone interface in different planes were reduced by about 40%, in the optimized thread, compared with the initial design. CONCLUSIONS: The optimized design found in this study is a buttress thread with a fine pitch, but deep thread, which keeps the mechanical stimuli in a safe range to grant an acceptable level of stability.
Assuntos
Implantes Dentários , Simulação por Computador , Estresse Mecânico , Fenômenos Biomecânicos , Análise de Elementos FinitosRESUMO
PURPOSE: Fascial changes in hypermobile Ehlers-Danlos syndrome (hEDS), a heritable connective tissue disorder, can be used visualized with sonoelastography. The purpose of this study was to explore the inter-fascial gliding characteristics in hEDS. METHODS: In 9 subjects, the right iliotibial tract was examined with ultrasonography. Tissue displacements of the iliotibial tract were estimated from ultrasound data using cross-correlation techniques. RESULTS: In hEDS subjects, shear strain was 46.2%, lower than those with lower limb pain without hEDS (89.5%) and in control subjects without hEDS and without pain (121.1%). CONCLUSION: Extracellular matrix changes in hEDS may manifest as reduced inter-fascial plane gliding.
Assuntos
Síndrome de Ehlers-Danlos , Humanos , Síndrome de Ehlers-Danlos/diagnóstico por imagem , Fascia Lata/diagnóstico por imagem , Dor , UltrassonografiaRESUMO
Force recording (mode, intensity, and orientation) is of great importance in medical rehabilitation, military reconnaissance, space exploration, etc. However, sensors with both reversibility and memorability are still challenging. Here, a reversible sensor based on polymer-dispersed cholesteric liquid crystals (CLC) is developed as a force recorder. Based on the microarea mechano-optical response and finite element analysis, it is confirmed that the mechanochromic response is mediated by the shear deformation of the polymer network and neighboring CLC. There is an obvious quantitative relationship between force intensity, mode, orientation, and the microarea optical response. Moreover, the sensing layer with a lower modulus or thickness is advantageous for a more sensitive device with lower starting pressure. Additionally, the excellent sensitivity and accuracy also highlight the potential applications in force analysis, path tracking, or pattern detection.
RESUMO
This article investigated the effect of shear strain on the nematic itraconazole (ITR) from both elastic and plastic deformation regions. The rheo-dielectric technique was used for this purpose. It has been demonstrated that shear strain can change the sample color, liquid crystal alignment as well as its dielectric and thermal properties. The observed modifications depend on the shear strain value. One can distinguish four regions regarding the slope of ITR stress-strain dependence and caused changes. Proper alignment changes (obtained after the shearing procedure) can additionally affect the further recrystallization of ITR to other than the initial, i.e., second polymorphic form.
Assuntos
Itraconazol , Itraconazol/químicaRESUMO
Lamb wave propagation in the anisotropic material is characterized by the prominent directivity of wave energy transfer governed by the fiber direction. Due to this anisotropic behavior, it is difficult to define the location of defects by using the arriving time of reflected signals. In this article, A0-mode Lamb wave-based damage detection technique has been illustrated which can detect the overlapping region of incident and scattered wave in the vicinity of the finite defect region in CFRP composite plate-like structure. A 5-cycle Hanning windowed tone burst of 30 kHz has been allowed to propagate through a 2 mm thickness [0/90]4S CFRP plate with subsurface cylindrical defect. In the near field region of the defect, the incoming and reflected wave overlaps and the dynamic shear strains of the out-of-plane displacement evaluated consequently. A covariance matrix is developed consisting of the shear strains. The proposed technique can detect the overlapping regions by measuring the determinant of covariance matrix, thus the image of the defect can be reconstructed. In this article, the analytical model of the proposed wavelet-based technique for the subsurface cylindrical defect is discussed and their physical meanings are investigated through numerical and experimental studies in a cross-ply laminate.