Multiple sclerosis treatments a review of current biomedical engineering approaches.

Multiple Sclerosis (MS) is an autoimmune condition targeting the central nervous system (CNS) characterized by focal demyelination with inflammation, causing neurodegeneration and gliosis. This is accompanied by a refractory period in relapsing MS or chronic progression in primary progressive MS. Current MS treatments target disease relapses and aim to reduce further demyelination and disability. These include the treatment of acute exacerbations through global immunomodulation upon corticosteroid administration, which are accompanied by adverse reactions. Disease modifying therapies (DMTs) which provide targeted immunosuppression of T and B cells, and sequestration of leukocytes out of CNS, have led to further improvements in demyelination prevention and disease burden reduction. Despite their efficacy, DMTs are ineffective in remyelination, pathology reversal and have minimal effects in progressive MS. The advent of modern biomedical engineering approaches in combination with a better understanding of MS pathology, has led to the development of novel, regenerative approaches to treatment. Such treatments utilize neural stem cells (NSCs) and can reduce disease relapses and reverse damage caused by the disease through localized tissue regeneration. While at initial stages, pre-clinical and clinical studies utilizing NSCs and immune modulation have shown promising outcomes in tissue regeneration, creating a potential new era in MS therapy.

Facile Combination of Bismuth Vanadate with Nickel Tellurium Oxide for Efficient Photoelectrochemical Catalysis of Water Oxidation Reactions.

Bismuth vanadate (BVO) having suitable band edges is one of the effective photocatalysts for water oxidation, which is the rate-determining step in the water splitting process. Incorporating cocatalysts can reduce activation energy, create hole sinks, and improve photocatalytic ability of BVO. In this work, the visible light active nickel tellurium oxide (NTO) is used as the cocatalyst on the BVO photoanode to improve photocatalytic properties. Different NTO amounts are deposited on the BVO to balance optical and electrical contributions. Higher visible light absorbance and effective charge cascades are developed in the NTO and BVO composite (NTO/BVO). The highest photocurrent density of 6.05 mA/cm2 at 1.23 V versus reversible hydrogen electrode (VRHE) and the largest applied bias photon-to-current efficiency (ABPE) of 2.13% are achieved for NTO/BVO, while BVO shows a photocurrent density of 4.19 mA/cm2 at 1.23 VRHE and ABPE of 1.54%. Excellent long-term stability under light illumination is obtained for NTO/BVO with photocurrent retention of 91.31% after 10,000 s. The photoelectrochemical catalytic mechanism of NTO/BVO is also proposed based on measured band structures and possible interactions between NTO and BVO. This work has depicted a novel cocatalytic BVO system with a new photocharging material and successfully achieves high photocurrent densities for catalyzing water oxidation.

Patterned Hybrid Surfaces for Efficient Dew Harvesting.

Dew harvesting, minimally influenced by climate and geographical locations, is an ideal method for addressing water shortage problems. Superhydrophilic surfaces, characterized by their highest affinity for water, are particularly attractive for this purpose as they can attract more water molecules via condensation. However, a significant challenge arises from the high surface capillary force that impedes water from sliding down and being effectively collected. The resulting water film on the superhydrophilic surface tends to stay around the edge of the water collection surface, leading to evaporation loss and reduced collection efficacy. To overcome this problem, triangular patterns with low surface adhesion to water were introduced at the edge of superhydrophilic surfaces. This modification, achieved through a wet chemical method and masked oxygen plasma treatment, has significantly improved the efficiency of water collection. Results indicate that the hybrid surface reduced the time for the first water droplet to slide down by half and increased water collection efficiency by 78% compared to uniform superhydrophilic surfaces and by 536% compared to uniform superhydrophobic surfaces under a relative humidity of 55% with a temperature difference of 15 °C. The underlying principles were elucidated through computational simulations, and the mechanisms driving the enhancement in collection efficiency were explained.

Improving Triethylamine-Sensing Performance of WO3 Nanoplates through In Situ Heterojunction Construction.

Surface engineering techniques can be used to develop high-performance gas sensing materials and advance the development of sensors. In this study, we improved the gas sensing performance of two-dimensional (2D) WO3 nanoplates by combining surface Zn modification and the in situ formation of ZnWO4/WO3 heterojunctions. Introducing Zn atoms by surface modification can reconstruct the atomic surface of 2D WO3 nanoplates, creating additional active sites. This allowed for the preparation of various types of ZnWO4/WO3 heterojunctions on the surface of the WO3 nanoplates, which improved the selectivity and sensitivity to the target gas triethylamine. The sensor exhibited good gas sensing performance for triethylamine even at low operating temperatures and strongly resisted humidity changes. The ZnWO4/WO3 material we prepared demonstrated a nearly threefold improvement in the triethylamine (TEA) response, with a gas sensing responsivity of 40.75 for 10 ppm of TEA at 250 °C. The sensor based on ZnWO4/WO3 has a limit of detection (LOD) for TEA of 200 ppb in practical measurements (its theoretical LOD is even as low as 31 ppb). The method of growing ZnWO4 on the surface of WO3 nanoplates using surface modification techniques to form surface heterojunctions differs from ordinary composites. The results suggest that the in situ construction of surface heterojunctions using surface engineering strategies, such as in situ modifying, is a practical approach to enhance the gas sensing properties and resistance to the humidity changes of metal oxide materials.

Janus Structure Construction of Polyester-Cotton Fabrics for Achieving Excellent Moisture, Moisture-Permeability, and Antibacterial Capability.

Integration of hydrophobic and antibacterial functionalities into polyester-cotton blended (PTCO) textiles has attracted more attention but remains a challenge. Here, a Janus fabric with antibacterial effect, hydrophobicity, and enhanced moisture-permeability is fabricated using a "mist polymerization" approach. The PET fibers in the PTCO fabric are amino-functionalized through ammonolysis reactions of PET molecules with HDA, and mist treatments of poly lauryl methacrylate (PLMA) and poly(DMC-co-MA) (PDM) are applied on the two side surfaces of the PTCO-HDA fabric, respectively. The resulting Janus fabric exhibits an antibacterial rate of 99.9% against both E. coli and S. aureus, along with a hydrophobic property on its single side (PTCO-HDA@PLMA). Additionally, the establishment of a surface-free energy gradient across the fabric confers superior moisture-permeability to the Janus fabric, offering advantages in preserving textile comfort. Moreover, this approach does not significantly compromise the original fabric properties, such as mechanical strength, moisture permeability, and fabric softness. The proposed method offers a straightforward and scalable strategy for textile finishing, demonstrating great potential in expanding the application scope of PTCO fabrics, and it may hold a pivotal role in diverse applications, notably encompassing home textiles, wound dressings, and high-performance sportswear.

Surface-Engineered Ni2P: An Efficient Oxygen Electrocatalyst for Zinc-Air Battery.

The surface engineering of electrocatalysts is one of the promising strategies to increase the intrinsic activity of electrocatalysts. It generates anion/cation vacancy defects and increases the electrochemically active surface area. We describe the surface engineering of Ni2P to favorably tune the bifunctional oxygen electrocatalytic activity and the development of a rechargeable zinc-air battery (ZAB). Ni2P encapsulated with N and P-dual doped carbon (Ni2P@NPC) is synthesized using a single-source precursor complex tris-(2,2'-bipyridine)nickel(II) bis(hexafluorophosphate). The surface engineering of the as-synthesized Ni2P@NPC is achieved by the controlled acid treatment at room temperature. The surface engineering removes carbon debris and opens the pores, exfoliates the encapsulating carbon layer, increases the P-vacancy in the crystal lattice, and boosts the electrochemically active surface area. The surface-engineered catalyst exhibits enhanced bifunctional activity towards oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The electrocatalytically active sites of engineered catalysts are highly accessible for facilitated electron transfer kinetics. P-vacancy favors the facile formation of defect-rich OER active metal oxyhydroxide species. The rechargeable ZAB based on the engineered catalyst delivers a specific capacity of 770.25 mA h gZn-1, energy density of 692 Wh kgZn-1, and excellent charge-discharge cycling performance with negligible voltaic efficiency loss (0.6 %) after 100 h.

Impact of Silicon Carbide Coating and Nanotube Diameter on the Antibacterial Properties of Nanostructured Titanium Surfaces.

This study aimed to comprehensively assess the influence of the nanotube diameter and the presence of a silicon carbide (SiC) coating on microbial proliferation on nanostructured titanium surfaces. An experiment used 72 anodized titanium sheets with varying nanotube diameters of 50 and 100 nm. These sheets were divided into four groups: non-coated 50 nm titanium nanotubes, SiC-coated 50 nm titanium nanotubes, non-coated 100 nm titanium nanotubes, and SiC-coated 100 nm titanium nanotubes, totaling 36 samples per group. P. gingivalis and T. denticola reference strains were used to evaluate microbial proliferation. Samples were assessed over 3 and 7 days using fluorescence microscopy with a live/dead viability kit and scanning electron microscopy (SEM). At the 3-day time point, fluorescence and SEM images revealed a lower density of microorganisms in the 50 nm samples than in the 100 nm samples. However, there was a consistently low density of T. denticola across all the groups. Fluorescence images indicated that most bacteria were viable at this time. By the 7th day, there was a decrease in the microorganism density, except for T. denticola in the non-coated samples. Additionally, more dead bacteria were detected at this later time point. These findings suggest that the titanium nanotube diameter and the presence of the SiC coating influenced bacterial proliferation. The results hinted at a potential antibacterial effect on the 50 nm diameter and the coated surfaces. These insights contribute valuable knowledge to dental implantology, paving the way for developing innovative strategies to enhance the antimicrobial properties of dental implant materials and mitigate peri-implant infections.

Cell Surface Engineering by Phase-Separated Coacervates for Antibody Display and Targeted Cancer Cell Therapy.

Cell therapies such as CAR-T have demonstrated significant clinical successes, driving the investigation of immune cell surface engineering using natural and synthetic materials to enhance their therapeutic performance. However, many of these materials do not fully replicate the dynamic nature of the extracellular matrix (ECM). This study presents a cell surface engineering strategy that utilizes phase-separated peptide coacervates to decorate the surface of immune cells. We meticulously designed a tripeptide, Fmoc-Lys-Gly-Dopa-OH (KGdelta; Fmoc=fluorenylmethyloxycarbonyl; delta=Dopa, dihydroxyphenylalanine), that forms coacervates in aqueous solution via phase separation. These coacervates, mirroring the phase separation properties of ECM proteins, coat the natural killer (NK) cell surface with the assistance of Fe3+ ions and create an outer layer capable of encapsulating monoclonal antibodies (mAb), such as Trastuzumab. The antibody-embedded coacervate layer equips the NK cells with the ability to recognize cancer cells and eliminate them through enhanced antibody-dependent cellular cytotoxicity (ADCC). This work thus presents a unique strategy of cell surface functionalization and demonstrates its use in displaying cancer-targeting mAb for cancer therapies, highlighting its potential application in the field of cancer therapy.

Strain engineering of PtMn alloy enclosed by high-indexed facets boost ethanol electrooxidation.

Surface strain engineering has proven to be an efficient strategy to enhance catalytic properties of platinum (Pt)-based catalysts for electrooxidation reactions. Herein, the S-doped PtMn concave cubes (CNCs) enclosed with high index facets (HIFs) and regulatable surface strain are successfully fabricated by two steps hydrothermal method. The S element with electrophilic property can modify the near-surface of PtMn nanocrystals, altering the electronic structure of Pt to effectively regulate the adsorption/desorption of intermediates in the ethanol electrooxidation reaction (EOR). The PtMnS1.1 catalyst with optimal surface strain delivered extraordinary catalytic performance on EOR in acidic media, with a specific activity of 2.88 mA/cm2 and mass activity of 1.10 mA/µgPt, which is 4.1 and 2.2 times larger than that of state-of-the-art Pt/C catalyst, respectively. Additionally, the PtMnS1.1 catalyst also achieve excellent catalytic properties in alkaline electrolyte for EOR. The results of kinetic studies indicated that the surface strain and modified electronic structure can degrade the activation energy barrier during the process of EOR, which is beneficial for enhance the reaction rate. This work provides a promising approach to construct highly efficient electrocatalysts with tunable surface strain effects for clean energy electro-chemical reactions.

Surface engineering of metal-organic framework nanoparticles-based miRNA carrier: Boosting RNA stability, intracellular delivery and synergistic therapy.

MicroRNAs (miRNAs) are small noncoding RNAs that are critical for the regulation of multiple physiological and pathological processes, thus holding great clinical potential. However, the therapeutic applications of miRNAs are severely limited by their biological instability and poor intracellular delivery. Herein, we describe a dual-layers surface engineering strategy to design an efficient miRNA delivery nanosystem based on metal-organic frameworks (MOFs) incorporating lipid coating. The resulting nanoparticle system was demonstrated to protect miRNA from ribonuclease degradation, enhance cellular uptake and facilitate lysosomal escape. These ensured effective miRNA mediated gene therapy, which synergized with MOF-specific photodynamic therapy and pre-encapsulated doxorubicin (Dox) chemotherapy to provide a multifunctional with therapeutic effectiveness against cencer cells The mechanisms of miRNA binding and Dox loading were revealed, demonstrating the potential of the present MOFs surface-engineered strategy to overcome their inherent pore-size restriction for macromolecular miRNA carrying, enableefficient co-delivery. In vitro studies revealed the potential of our multifunctional system for miRNA delivery and the demonstrated the therapeutic effectiveness against cancer cells, thereby providing a versatile all-in-one MOFs strategy for delivery of nucleic acids and diverse therapeutic molecules in synergistic therapy.

Individual cell modification with cell surface specific atom transfer radical polymerization for enhanced Cr(VI) removal.

Modifying cells with polymers on the surface can enable them to gain or enhance function with various applications, wherein the atom transfer radical polymerization (ATRP) has garnered significant potential due to its biocompatibility. However, specifically initiating ATRP from the cell surface for in-situ modification remains challenging. This study established a bacterial surface-initiated ATRP method and further applied it for enhanced Cr(VI) removal. The cell surface specificity was facilely achieved by cell surface labelling with azide substrates, following alkynyl ATRP initiator specifically anchoring with azide-alkyne click chemistry. Then, the ATRP polymerization was initiated from the cell surface, and different polymers were successfully applied to in-situ modification. Further analysis revealed that the modification of Shewanella oneidensis with poly (4-vinyl pyridine) and sodium polymethacrylate improved the heavy metal tolerance and enhanced the Cr(VI) removal rate of 2.6 times from 0.088 h-1 to 0.314 h-1. This work provided a novel idea for bacterial surface modification and would extend the application of ATRP in bioremediation.

Effect of Mn2+doping and DDAB-assisted postpassivation on the structural and optical properties of CsPb(Cl/Br)3halide perovskite nanocrystals.

Cesium lead halide perovskite (CsPbX3; X = Cl, Br, I) nanocrystals showing intense band-edge emission and high photoluminescence quantum yield are known to be a potential candidate for application in optoelectronic devices. However, controlling toxicity due to the presence of Pb2+in lead-based halide perovskites is a major challenge for the environment that needs to be tackled cautiously. In this work, we have partially replaced Pb2+with Mn2+ions in the CsPb(Cl/Br)3nanocrystals and investigated their impact on the structural and optical properties. The Rietveld refinement shows that CsPbCl2Br nanocrystals possess a cubic crystal structure withPm3̅mspace group, the Mn2+doping results in the contraction of the unit cell. The CsPb(Cl/Br)3: Mn nanocrystals show a substantial change in the optical properties with an additional emission band at ∼588 nm through a d-d transition, changing the emission color from blue to pink. Here, a didodecyldimethylammonium bromide (DDAB) ligand that triggers both anion and ligand exchange in the CsPb(Cl/Br)3: Mn nanocrystals have been used to regulate the exchange reaction and tune the emission color of halide perovskites by changing the peak position and the PL intensities of band-edge and Mn2+defect states. We have also shown that oleic acid helps in the desorption of oleylamine capping from the CsPb(Cl/Br)3: Mn nanocrystal surfaces and DDAB, resulting in the substitution of Cl-with Br-as well as provides capping with shorter branched length ligand which led to increase in the overall PL intensity by many folds.

Therapeutic biomaterials with liver X receptor agonists based on the horizon of material biology to regulate atherosclerotic plaque regression in situ for devices surface engineering.

Percutaneous coronary interventional is the main treatment for coronary atherosclerosis. At present, most studies focus on blood components and smooth muscle cells to achieve anticoagulation or anti-proliferation effects, while the mediated effects of materials on macrophages are also the focus of attention. Macrophage foam cells loaded with elevated cholesterol is a prominent feature of atherosclerotic plaque. Activation of liver X receptor (LXR) to regulate cholesterol efflux and efferocytosis and reduce the number of macrophage foam cells in plaque is feasible for the regression of atherosclerosis. However, cholesterol efflux promotion remains confined to targeted therapies. Herein, LXR agonists (GW3965) were introduced on the surface of the material and delivered in situ to atherogenic macrophages to improve drug utilization for anti-atherogenic therapy and plaque regression. LXR agonists act as plaque inhibition mediated by multichannel regulation macrophages, including lipid metabolism (ABCA1, ABCG1 and low-density lipoprotein receptor), macrophage migration (CCR7) and efferocytosis (MerTK). Material loaded with LXR agonists significantly reduced plaque burden in atherosclerotic model rats, most importantly, it did not cause hepatotoxicity and adverse reactions such as restenosis and thrombosis after material implantation. Both in vivo and in vitro evaluations confirmed its anti-atherosclerotic capability and safety. Overall, multi-functional LXR agonist-loaded materials with pathological microenvironment regulation effect are expected to be promising candidates for anti-atherosclerosis and have potential applications in cardiovascular devices surface engineering.

Failure mechanism analysis and emerging strategies for enhancing the photoelectrochemical stability of photoanodes.

The development of efficient and stable photoanode materials is essential for driving the possible practical application of photoelectrochemical water splitting. This article begins with a basic understanding of the fundamentals of photoelectrochemical devices and photoanodes. State-of-the-art strategies for designing photoanodes with long-term stability are highlighted, including insertion of hole transport layers, construction of protective/passivation layers, loading of co-catalysts, construction of heterojunctions, and modification of the electrolyte. Based on the insights gained from these effective strategies, we present an outlook for addressing key aspects of the challenges of stabilizing photoanodes development in the future work. Widespread adoption of stability assessment criteria will facilitate reliable comparisons of results from different laboratories. In addition, deactivation of photoanode is defined as a 50% reduction in productivity. An in-depth understanding of the deactivation mechanism is essential for the design and development of efficient and stable photoanodes. This work will provide insights into the stability assessment of photoanode and facilitate the production of practical solar fuels.

Surface Engineering of Magnetic Iron Oxide Nanoparticles for Breast Cancer Diagnostics and Drug Delivery.

Data published in 2020 by the International Agency for Research on Cancer (IARC) of the World Health Organization show that breast cancer (BC) has become the most common cancer globally, affecting more than 2 million women each year. The complex tumor microenvironment, drug resistance, metastasis, and poor prognosis constitute the primary challenges in the current diagnosis and treatment of BC. Magnetic iron oxide nanoparticles (MIONPs) have emerged as a promising nanoplatform for diagnostic tumor imaging as well as therapeutic drug-targeted delivery due to their unique physicochemical properties. The extensive surface engineering has given rise to multifunctionalized MIONPs. In this review, the latest advancements in surface modification strategies of MIONPs over the past five years are summarized and categorized as constrast agents and drug delivery platforms. Additionally, the remaining challenges and future prospects of MIONPs-based targeted delivery are discussed.

Application of MXene composites for target gas detection in food safety.

Food contamination has long plagued agriculture, posing significant health risks to consumers. The use of volatile gases for food safety detection has proven highly effective, with composite gas sensors that leverage the two-dimensional material MXene exhibiting notable advancements in detecting various target gases. This paper reviews the progress of MXene-based composite gas sensors in the detection of food safety-related gases. The review begins by examining MXene material synthesis methods and then presents an overview of techniques aimed at enhancing MXene-based sensor detection capabilities. Recently, advancements in MXene composite gas sensors tailored for food safety gases have been highlighted. Finally, challenges encountered in gas-sensing applications of MXene-based composites are outlined, alongside predictions for their future development, aiming to offer insights for the application and advancement of intelligent gas sensors for target gases in food safety.

Three-Dimensional Metallic Surface Micropatterning through Tailored Photolithography-Transfer-Plating.

Precise micropatterning on three-dimensional (3D) surfaces is desired for a variety of applications, from microelectronics to metamaterials, which can be realized by transfer printing techniques. However, a nontrivial deficiency of this approach is that the transferred microstructures are adsorbed on the target surface with weak adhesion, limiting the applications to external force-free conditions. We propose a scalable "photolithography-transfer-plating" method to pattern stable and durable microstructures on 3D metallic surfaces with precise dimension and location control of the micropatterns. Surface patterning on metallic parts with different metals and isotropic and anisotropic curvatures is showcased. This method can also fabricate hierarchical structures with nanoscale vertical and microscale horizontal dimensions. The plated patterns are stable enough to mold soft materials, and the structure durability is validated by 24 h thermofluidic tests. We demonstrate micropatterned nickel electrodes for oxygen evolution reaction acceleration in hydrogen production, showing the potential of micropatterned 3D metallic surfaces for energy applications.

Investigating the Effects of Lubricant Infusion Methods on Polymer SLIPS.

Slippery lubricant infused porous surfaces (SLIPSs) are promising bioinspired surfaces with self-healing and droplet wetting properties, among many others, that are desirable due to their range of applications. Recently, there have been many developments in the SLIPS field regarding the creation of textured surfaces and lubricant selection. However, there is a lack of knowledge regarding the method of lubricant infusion. In this study, we aim to fill this void by investigating different infusion methods that impose external forces on the lubricant. We developed our SLIPS by hot embossing nanostructures onto polypropylene by using molds that were laser micromachined. These textured surfaces were then infused with silicone oil using three different infusion methods: ultrasonication, vacuum, and hydrostatic pressure. We analyzed the wettability and slipperiness of the SLIPS by evaluating the critical tilt angle and comparing the sliding velocities of water droplets on each sample at a tilt angle of 20°. Additionally, the durability of the SLIPS was tested by dropping 50 successive water drops onto the samples and evaluating the droplet-surface interactions throughout. The sonicated infusion method yielded SLIPS that performed the best with a contact angle hysteresis of 13°, a critical tilt angle of 18.3°, a sliding velocity of 1.66 mm/s, and the least accumulation of droplets over time with use. These values are greatly improved when compared to the control sample where lubricant was simply dripped on, which resulted in a contact angle hysteresis of 20°, a critical tilt angle of 26.3°, and a sliding velocity of 0.23 mm/s. The sonicated and drip infusion methods were also compared with different materials (stainless steel) and different textures (microstructures). It was found that the improvement in slipperiness using the sonicated infusion method is prominent for nanoscale textures on both stainless steel and polypropylene. In this study, we discuss the challenges with oil depletion in SLIPS (cloaking and wetting ridges) and with the selection of contact angle measurement methods. While further investigation as to why certain applied forces during infusion yield better SLIPS is warranted, these forces greatly affect the outcome. This work suggests that researchers should consider using sonication or other methods of lubricant infusion that apply external forces as infusion techniques to yield better SLIPS on the nanoscale.

Advances in preparation and engineering of plant-derived extracellular vesicles for nutrition intervention.

Plant-derived extracellular vesicles (PLEVs), as a type of naturally occurring lipid bilayer membrane structure, represent an emerging delivery vehicle with immense potential due to their ability to encapsulate hydrophobic and hydrophilic compounds, shield them from external environmental stresses, control release, exhibit biocompatibility, and demonstrate biodegradability. This comprehensive review analyzes engineering preparation strategies for natural vesicles, focusing on PLEVs and their purification and surface engineering. Furthermore, it encompasses the latest advancements in utilizing PLEVs to transport active components, serving as a nanotherapeutic system. The prospects and potential development of PLEVs are also discussed. It is anticipated that this work will not only address existing knowledge gaps concerning PLEVs but also provide valuable guidance for researchers in the fields of food science and biomedical studies, stimulating novel breakthroughs in plant-based therapeutic options.

Facile Polymer of Intrinsic Microporosity-Modified Separator with Quite-Low Loading for Enhanced-Performance Lithium Metal Batteries.

Lithium metal batteries (LMBs) using Li metals as anodes are conspicuous for high-energy-density energy-storage devices. However, the nonuniform deposition of Li+ ions leading to uncontrolled Li dendrite growth, which adversely affects electrochemical performance and safety, has impeded the practical application of lithium metal batteries (LMBs). Herein, PIM-1, a type of polymer of intrinsic microporosity (PIM), was utilized for surface engineering of conventional polyolefin separators. This process resulted in the formation of a continuous and homogeneous coating across the separator, facilitating uniform Li+ ion flux and deposition, and consequently reducing dendrite formation. Notably, the loading mass was quite low (0.6 g/m2) through the convenient dipping method. The intrinsic micropores and polar groups (cyano and ether groups) of PIM-1 greatly improved the electrolyte wettability and ionic conductivity of commercial polypropylene (PP) separators. And the PIM-1 coating guided Li+ flux to achieve uniform Li deposition. Moreover, the polar groups (cyano and ether groups) of PIM-1 are beneficial to the desolvation of Li+-solvates. As a result, the synergetic effect of uniform Li+ flux, desolvation, and enhanced mechanical strength of separators brings about considerable improvement in cycle life, suppression of Li dendrite, and Coulombic efficiency for LMBs. As this surface engineering is simple, relatively low-cost, and effective, this work provides fresh insights into separators for LMBs.