RESUMO
The cyclization of 3-hydroxy alkynes and the carboxylation of terminal alkynes both with CO2 are two attractive strategies to simultaneously reduce CO2 emission and produce value-added chemicals. Herein, the differential activation of alkynes over atomically precise Ag nanoclusters (NCs) supported on Metal-organic framework-derived highly-open mesoporous CeO2 (HM-CeO2) by reserving or removing their surface captopril ligands is reported. The ligand-capped Ag NCs possess electron-rich Ag atoms as efficient π-activation catalytic sites in cyclization reactions, while the naked Ag NCs possess partial positive-charged Ag atoms as perfect σ-activation catalytic sites in carboxylation reactions. Impressively, via coupling with HM-CeO2 featuring abundant basic sites and quick mass transfer, the ligand-capped Ag NCs afford 97.9% yield of 4,4-dimethyl-5-methylidene-1,3-dioxolan-2-one for the cyclization of 2-methyl-3-butyn-2-ol with CO2, which is 4.5 times that of the naked Ag NCs (21.7%), while the naked Ag NCs achieve 98.5% yield of n-butyl 2-alkynoate for the carboxylation of phenylacetylene with CO2, which is 15.6 times that of ligand-capped Ag NCs (6.3%). Density functional theory calculations reveal the ligand-capped Ag NCs can effectively activate alkynyl carbonate ions for the intramolecular ring closing in cyclization reaction, while the naked Ag NCs are highly affiliative in stabilizing terminal alkynyl anions for the insertion of CO2 in carboxylation reaction.
RESUMO
Fluorescent gold nanoclusters (AuNCs) have shown promise as metal ion sensors. Further research into surface ligands is crucial for developing sensors that are both selective and sensitive. Here, we designed simple tripeptides to form fluorescent AuNCs, capitalizing on tyrosine's reduction capability under alkaline conditions. We investigated tyrosine's role in both forming AuNCs and sensing metal ions. Two tripeptides, tyrosine-cysteine-tyrosine (YCY) and serine-cysteine-tyrosine (SCY), were used to form AuNCs. YCY peptides produced AuNCs with blue and red fluorescence, while SCY peptides produced blue-emitting AuNCs. The blue fluorescence of YCY- and SCY-AuNCs was selectively quenched by Fe3+ and Cu2+, whereas red-emitting YCY-AuNC fluorescence remained stable with 13 different metal ions. The number of tyrosine residues influenced the sensor response. DLS measurements revealed different aggregation propensities in the presence of various metal ions, indicating that chelation between the peptide and target ions led to aggregation and fluorescence quenching. Highlighting the innovation of our approach, our study demonstrates the feasibility of the rational design of peptides for the formation of fluorescent AuNCs that serve as highly selective and sensitive surface ligands for metal ion sensing. This method marks an advancement over existing methods due to its dual capability in both synthesizing gold nanoclusters and detecting analytes, specifically Fe3+ and Cu2+.
Assuntos
Cobre , Ouro , Ferro , Nanopartículas Metálicas , Ouro/química , Cobre/química , Cobre/análise , Nanopartículas Metálicas/química , Ferro/química , Ferro/análise , Oligopeptídeos/química , Oligopeptídeos/análise , Tirosina/química , Tirosina/análise , Espectrometria de Fluorescência/métodosRESUMO
Halide perovskite nanocrystals (NCs), specifically CsPbBr3, have attracted considerable interest due to their remarkable optical properties for optoelectronic devices. To achieve high-efficiency light-emitting diodes (LEDs) based on CsPbBr3 nanocrystals (NCs), it is crucial to optimize both their photoluminescence quantum yield (PLQY) and carrier transport properties when they are deposited to form films on substrates. While the exchange of native ligands with didodecyl dimethylammonium bromide (DDAB) ligand pairs has been successful in boosting their PLQY, dense DDAB coverage on the surface of NCs should impede carrier transport and limit device efficiency. Following our previous work, here, we use oleyl phosphonic acid (OLPA) as a selective stripping agent to remove a fraction of DDAB from the NC surface and demonstrate that such stripping enhances carrier transport while maintaining a high PLQY. Through systematic optimization of OLPA dosage, we significantly improve the performance of CsPbBr3 LEDs, achieving a maximum external quantum efficiency (EQE) of 15.1% at 516 nm and a maximum brightness of 5931 cd m-2. These findings underscore the potential of controlled ligand stripping to enhance the performance of CsPbBr3 NC-based optoelectronic devices.
RESUMO
Achieving high-performance perovskite light-emitting diodes (PeLEDs) with pure-red electroluminescence for practical applications remains a critical challenge because of the problematic luminescence property and spectral instability of existing emitters. Herein, high-efficiency Rec. 2020 pure-red PeLEDs, simultaneously exhibiting exceptional brightness and spectral stability, based on CsPb(Br/I)3 perovskite nanocrystals (NCs) capping with aromatic amino acid ligands featuring cation-π interactions, are reported. It is proven that strong cation-π interactions between the PbI6 -octahedra of perovskite units and the electron-rich indole ring of tryptophan (TRP) molecules not only chemically polish the imperfect surface sites, but also markedly increase the binding affinity of the ligand molecules, leading to high photoluminescence quantum yields and greatly enhanced spectral stability of the CsPb(Br/I)3 NCs. Moreover, the incorporation of small-size aromatic TRP ligands ensures superior charge-transport properties of the assembled emissive layers. The resultant devices emitting at around 635 nm demonstrate a champion external quantum efficiency of 22.8%, a max luminance of 12â¯910 cd m-2 , and outstanding spectral stability, representing one of the best-performing Rec. 2020 pure-red PeLEDs achieved so far.
RESUMO
Organic capping agents are a ubiquitous and crucial part of preparing reproducible and homogeneous batches of nanomaterials, particularly nanocrystals with well-defined facets. Despite studies reporting surface ligands (e.g., capping agents) having a non-negligible role in catalytic behavior, their impact is less understood in contaminant adsorption, an important consideration given their potential to obfuscate facet-dependent trends in performance. To ascribe observed behaviors to the facet or the ligand, this report evaluates the impact of poly(N-vinyl-2-pyrrolidone) (PVP), a commonly utilized capping agent, on the adsorption performance of nanohematite particles of varying prevailing facet in the removal of selenite (Se(IV)) as a model system. The PVP capping agent reduces the available surface area for contaminant binding, thus resulting in a reduction in overall Se(IV) adsorbed. However, accounting for the effects of surface area, {012}-faceted nanohematite demonstrates a significantly higher sorption capacity for Se(IV) compared with that of {001}-faceted nanohematite. Notably, chemical treatment is minimally effective in removing strongly bound PVP, indicating that complete removal of surface ligands remains challenging.
RESUMO
Perovskite nanocrystals (PeNCs) are known for their use in numerous optoelectronic applications. Surface ligands are critical for passivating surface defects to enhance the charge transport and photoluminescence quantum yields of the PeNCs. Herein, we investigated the dual functional abilities of bulky cyclic organic ammonium cations as surface-passivating agents and charge scavengers to overcome the lability and insulating nature of conventional long-chain type oleyl amine and oleic acid ligands. Here, red-emitting hybrid PeNCs of the composition CsxFA(1-x)PbBryI(3-y) are chosen as the standard (Std) sample, where cyclohexylammonium (CHA), phenylethylammonium (PEA) and (trifuluoromethyl)benzylamonium (TFB) cations were chosen as the bifunctional surface-passivating ligands. Photoluminescence decay dynamics showed that the chosen cyclic ligands could successfully eliminate the shallow defect-mediated decay process. Further, femtosecond transient absorption spectral (TAS) studies uncovered the rapidly decaying non-radiative pathways; i.e., charge extraction (trapping) by the surface ligands. The charge extraction rates of the bulky cyclic organic ammonium cations were shown to depend on their acid dissociation constant (pKa) values and actinic excitation energies. Excitation wavelength-dependent TAS studies indicate that the exciton trapping rate is slower than the carrier trapping rate of these surface ligands.
RESUMO
Analysis of the influence of dissimilar facets on the adsorption, stability, mobility, and reactivity of surface ligands is essential for designing ligand-coated nanocrystals with optimal functionality. Herein, para-nitrothiophenol and nitronaphthalene were chemisorbed and physisorbed, respectively, on Au nanocrystals, and the influence of different facets within a single Au nanocrystal on ligands properties were identified by IR nanospectroscopy measurements. Preferred adsorption was probed on (001) facets for both ligands, with a lower density on (111) facets. Exposure to reducing conditions led to nitro reduction and diffusion of both ligands toward the top (111) facet. Nitrothiophenol was characterized with a diffusivity higher than that of nitronaphthalene. Moreover, the strong thiol-Au interaction led to the diffusion of Au atoms and the formation of thiol-coated Au nanoparticles on the silicon surface. It is identified that the adsorption and reactivity of surface ligands were mainly influenced by the atomic properties of each facet, while diffusion was controlled by ligand-metal interactions.
RESUMO
Quantum dots (QDs) of formamidinium lead triiodide (FAPbI3 ) perovskite hold great potential, outperforming their inorganic counterparts in terms of phase stability and carrier lifetime, for high-performance solar cells. However, the highly dynamic nature of FAPbI3 QDs, which mainly originates from the proton exchange between oleic acid and oleylamine (OAm) surface ligands, is a key hurdle that impedes the fabrication of high-efficiency solar cells. To tackle such an issue, here, protonated-OAm in situ to strengthen the ligand binding at the surface of FAPbI3 QDs, which can effectively suppress the defect formation during QD synthesis and purification processes is selectively introduced. In addition, by forming a halide-rich surface environment, the ligand density in a broader range for FAPbI3 QDs without compromising their structural integrity, which significantly improves their optoelectronic properties can be modulated. As a result, the power conversion efficiency of FAPbI3 QD solar cells (QDSCs) is enhanced from 7.4% to 13.8%, a record for FAPbI3 QDSCs. Furthermore, the suppressed proton exchange and reduced surface defects in FAPbI3 QDs also enhance the stability of QDSCs, which retain 80% of the initial efficiency upon exposure to ambient air for 3000 hours.
RESUMO
Microscale patterning of colloidal nanocrystal (NC) films is important for their integration in devices. Here, we introduce the direct optical patterning of all-inorganic NCs without the use of additional photosensitive ligands or additives. We determined that photoexposure of ligand-stripped, "bare" NCs in air significantly reduces their solubility in polar solvents due to photo-oxidation of surface ions. Doses as low as 20 mJ/cm2 could be used; the only obvious criterion for material selection is that the NCs need to have significant absorption at the irradiation wavelength. However, transparent NCs can still be patterned by mixing them with suitably absorbing NCs. This approach enabled the patterning of bare ZnSe, CdSe, ZnS, InP, CeO2, CdSe/CdS, and CdSe/ZnS NCs as well as mixtures of ZrO2 or HfO2 NCs with ZnSe NCs. Optical, X-ray photoelectron, and infrared spectroscopies show that solubility loss results from desorption of bound solvent due to photo-oxidation of surface ions. We also demonstrate two approaches, compatible with our patterning method, for modulating the porosity and refractive index of NC films. Block copolymer templating decreases the film density, and thus the refractive index, by introducing mesoporosity. Alternatively, hot isostatic pressing increases the packing density and refractive index of NC layers. For example, the packing fraction of a ZnS NC film can be increased from 0.51 to 0.87 upon hot isostatic pressing at 450 °C and 15â¯000 psi. Our findings demonstrate that direct lithography by photo-oxidation of bare NC surfaces is an accessible patterning method for facilitating the exploration of more complex NC device architectures while eliminating the influence of bulky or insulating surfactants.
RESUMO
Semiconductor nanocrystal quantum dots (QDs) are promising materials for solar energy conversion because of their bandgap tunability, high absorption coefficient, and improved hot-carrier generation. CuInSe2 (CISe)-based QDs have attracted attention because of their low toxicity and wide light-absorption range, spanning visible to near-infrared light. In this work, we study the effects of the surface ligands of colloidal CISe QDs on the photoelectrochemical characteristics of QD-photoanodes. Colloidal CISe QDs with mono- and bifunctional surface ligands are prepared and used in the fabrication of type-II heterojunction photoanodes by adsorbing QDs on mesoporous TiO2. QDs with monofunctional ligands are directly attached on TiO2 through partial ligand detachment, which is beneficial for electron transfer between QDs and TiO2. In contrast, bifunctional ligands bridge QDs and TiO2, increasing the amount of QD adsorption. Finally, photoanodes fabricated with oleylamine-passivated QDs show a current density of ~8.2 mA/cm2, while those fabricated with mercaptopropionic-acid-passivated QDs demonstrate a current density of ~6.7 mA/cm2 (at 0.6 VRHE under one sun illumination). Our study provides important information for the preparation of QD photoelectrodes for efficient photoelectrochemical hydrogen generation.
RESUMO
The electronic structure of quantum dots (QDs) including band edges and possible trap states is an important physical property for optoelectronic applications. The reliable determination of the energy levels of QDs remains a big challenge. Herein we employ cyclic voltammetry (CV) to determine the energy levels of three types of ZnO QDs with different surface ligands. Coupled with spectroscopic techniques, it is found that the onset potential of the first reductive wave is likely related to the conduction band edges while the first oxidative wave originates from the trap states. The determined specific energy levels in CV further demonstrates that the ZnO QDs without surface ligands mainly have oxygen interstitial defects whilst the ZnO QDs covered with ligands contain oxygen vacancies. The present electrochemical method offers a powerful and effective way to determine the energy levels of wide bandgap ZnO QDs, which will boost their device performance.
RESUMO
Precise patterning with microscale lateral resolution and widely tunable heights is critical for integrating colloidal nanocrystals into advanced optoelectronic and photonic platforms. However, patterning nanocrystal layers with thickness above 100 nm remains challenging for both conventional and emerging direct photopatterning methods, due to limited light penetration depths, complex mechanical and chemical incompatibilities, and others. Here, we introduce a direct patterning method based on a thermal mechanism, namely, the thermally activated ligand chemistry (or TALC) of nanocrystals. The ligand cross-linking or decomposition reactions readily occur under local thermal stimuli triggered by near-infrared lasers, affording high-resolution and nondestructive patterning of various nanocrystals under mild conditions. Patterned quantum dots fully preserve their structural and photoluminescent quantum yields. The thermal nature allows for TALC to pattern over 10 µm thick nanocrystal layers in a single step, far beyond those achievable in other direct patterning techniques, and also supports the concept of 2.5D patterning. The thermal chemistry-mediated TALC creates more possibilities in integrating nanocrystal layers in uniform arrays or complex hierarchical formats for advanced capabilities in light emission, conversion, and modulation.
RESUMO
The soft lattice of lead-halide perovskite nanocrystals (NCs) allows tuning their optoelectronic characteristics via anion exchange by introducing halide salts to a solution of perovskite NCs. Similarly, cross-anion exchange can occur upon mixing NCs of different perovskite halides. This process, though, is detrimental for applications requiring perovskite NCs with different halides in close proximity. We study the effects of various stabilizing surface ligands on the kinetics of the cross-anion exchange reaction, comparing zwitterionic and ionic ligands. The kinetic analysis, inspired by the "cage effect" for solution reactions, showcases a mechanism where the surface capping ligands act as anion carriers that diffuse to the NC surface, forming an encounter pair enclosed by the surrounding ligands that initiates the anion exchange process. The zwitterionic ligands considerably slow down the cross-anion exchange process, and while they do not fully inhibit it, they confer improved stability alongside enhanced solubility relevant for various applications.
RESUMO
Electron overcharge causes rapid luminescence quenching in the quantum dot (QD) emission layer in QD light-emitting diodes (QD-LEDs), resulting in low device performance. In this paper we describe the application of different aromatic thiol ligands and their influence on device performance as well as their behavior in combination with an electron blocking material (EBM). The three different ligands, 1-octanethiol (OcSH), thiophenol (TP), and phenylbutan-1-thiol (PBSH), were introduced on to InP/ZnSe/ZnS QDs referred to as QD-OcSH, QD-TP, and QD-PBSH. PBSH is in particular applied as a ligand to improve QD solubility and to enhance the charge transport properties synergistically with EBM probably via π-π interaction. We synthesized poly-[N,N-bis[4-(carbazolyl)phenyl]-4-vinylaniline] (PBCTA) and utilized it as an EBM to alleviate excess electrons in the active layer in QD-LEDs. The comparison of the three QD systems in an inverted device structure without the application of PBCTA as an EBM shows the highest efficiency for QD-PBSH. Moreover, when PBCTA is introduced as an EBM in the active layer in combination with QD-PBSH in a conventional device structure, the current efficiency shows a twofold increase compared to the reference device without EBM. These results strongly confirm the role of PBCTA as an EBM that effectively alleviates excess electrons in the active layer, leading to higher device efficiency.
RESUMO
Compared to water-soluble carbon dots (CDs) the properties and applications of hydrophobic CDs are rarely addressed. In this study, a one-pot, simple chemical oxidation approach has been applied to synthesize hydrophobic carbon dots (TO-CDs) at room temperature from triolein (TO) in concentrated sulfuric acid solution. Sodium copper chlorophyllin (SCC) quenches the fluorescence of TO-CDs by a photoinduced electron transfer process. Upon excitation at 400 nm, the fluorescence intensity of TO-CDs probe at 500 nm shows a linear response against the SCC concentration ranging from 1.0 to 10 µM, with a limit of detection (LOD) of 0.61 µM. Quantitation of SCC in flavored drinks shows percentage recovery (%R) vaues of 98-103% and relative standard deviation (RSD) values less than 6.5%. The hydrophobic TO-CDs can be converted into hydrophilic TO-CDs through hydrolysis in NaOH solution. The presence of sulfonyl groups on the hydrophilic TO-CDs enhances the coordination ability of the CDs toward Cu2+ ions, leading to fluorescence quenching which allows for the detection of Cu2+ ions with LOD of 0.21 µM and a linear range of 0.5-10 µM. The hydrophilic TO-CD probe possesses high selectivity toward Cu2+ ions (tolerance at least ten-fold comparative to other metal ions). The assay has been validated with the analysis of spiked soil samples, with %R values of Cu concentration of 97.8-99.0% and RSDs below 2.0%. The surface tunable CD probes demonstrate their potential for the rapid screening of Cu2+ ions in environmental samples and SCC in foods.
Assuntos
Carbono , Pontos Quânticos , Clorofilídeos , Cobre , Corantes Fluorescentes , Íons , Espectrometria de FluorescênciaRESUMO
Point-of-care (POC) technologies and testing programs hold great potential to significantly improve diagnosis and disease surveillance. POC tests have the intrinsic advantage of being able to be performed near the patient or treatment facility, owing to their portable character. With rapid results often in minutes, these diagnostic platforms have a high positive impact on disease management. POC tests are, in addition, advantageous in situations of a shortage of skilled personnel and restricted availability of laboratory-based analytics. While POC testing programs are widely considered in addressing health care challenges in low-income health systems, the ongoing pandemic of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infections could largely benefit from fast, efficient, accurate, and cost-effective point-of-care testing (POCT) devices for limiting COVID-19 spreading. The unrestrained availability of SARS-CoV-2 POC tests is indeed one of the adequate means of better managing the COVID-19 outbreak. A large number of novel and innovative solutions to address this medical need have emerged over the last months. Here, we critically elaborate the role of the surface ligands in the design of biosensors to cope with the current viral outbreak situation. Their notable effect on electrical and electrochemical sensors' design will be discussed in some given examples. Graphical abstract.
Assuntos
Antígenos Virais/análise , Técnicas Biossensoriais/métodos , Teste para COVID-19/métodos , COVID-19/diagnóstico , Testes Imediatos/tendências , SARS-CoV-2/imunologia , Antígenos Virais/imunologia , COVID-19/virologia , Técnicas Eletroquímicas , Humanos , Ligantes , Sistemas Automatizados de Assistência Junto ao LeitoRESUMO
Capping ligands are indispensable for the preparation of metal-halide-perovskite (MHP) nanocrystals (NCs) with good stability; however, the long alkyl-chain capping ligands in conventional MHP NCs will be unfavorable for CO2 adsorption and hinder the efficient carrier separation on the surface of MHP NCs, leading to inferior catalytic activity in artificial photosynthesis. Herein, CsPbBr3 nanocrystals with short-chain glycine as ligand are constructed through a facile ligand-exchange strategy. Owing to the reduced hindrance of glycine and the presence of the amine group in glycine, the photogenerated carrier separation and CO2 uptake capacity are noticeably improved without compromising the stability of the MHP NCs. The CsPbBr3 nanocrystals with glycine ligands exhibit a significantly increased yield of 27.7â µmol g-1 h-1 for photocatalytic CO2 -to-CO conversion without any organic sacrificial reagents, which is over five times higher than that of control CsPbBr3 NCs with conventional long alkyl-chain capping ligands.
RESUMO
Understanding electronic dynamics in multiexcitonic quantum dots (QDs) is important for designing efficient systems useful in high power scenarios, such as solar concentrators and multielectron charge transfer. The multiple charge carriers within a QD can undergo undesired Auger recombination events, which rapidly annihilate carriers on picosecond time scales and generate heat from absorbed photons instead of useful work. Compared to the transfer of multiple electrons, the transfer of multiple holes has proven to be more difficult due to slower hole transfer rates. To probe the competition between Auger recombination and hole transfer in CdSe, CdS, and CdSe/CdS QDs of varying sizes, we synthesized a phenothiazine derivative with optimized functionalities for binding to QDs as a hole accepting ligand and for spectroscopic observation of hole transfer. Transient absorption spectroscopy was used to monitor the photoinduced absorption features from both trapped holes and oxidized ligands under excitation fluences where the averaged initial number of excitons in a QD ranged from â¼1 to 19. We observed fluence-dependent hole transfer kinetics that last around 100 ps longer than the predicted Auger recombination lifetimes, and the transfer of up to 3 holes per QD. Theoretical modeling of the kinetics suggests that binding of hole acceptors introduces trapping states significantly different from those in native QDs passivated with oleate ligands. Holes in these modified trap states have prolonged lifetimes, which promotes the hole transfer efficiency. These results highlight the beneficial role of hole-trapping states in devising hole transfer pathways in QD-based systems under multiexcitonic conditions.
RESUMO
Analytical techniques are in high demand for the determination of organic capping agents on surfaces of metallic nanoparticles (NPs) such as gold (Au) and silver (Ag). In this study, the potential of laser desorption ionisation time-of-flight mass spectrometry (LDI-ToF-MS) as a technique fit for this purpose is demonstrated. First, a collection of reference spectra of most commonly used organic capping agents, including small molecules and polymers was established. Second, the robustness of the method was tested towards parameters like NP core material and NP size. In a third step, the quantitative capabilities of LDI-ToF-MS were determined. Finally, the potential to detect chemical alterations of the organic capping agent was evaluated. LDI-ToF-MS is able to detect capping agents ranging from small molecules (citric acid, tannic acid, lipoic acid) to large polymers (polyvinylpyrrolidone, branched polyethylenimine and methoxy polyethylene glycol sulfhydryl) on Au and Ag NPs based on characteristic signals for each capping agent. Small molecules showed characteristic fragment ions with low intensities, whereas polymers showed intense signals of the monomeric subunit. The NP concentration range comprises about two orders of magnitude with lowest detection limits of 5 mg/L or a capping agent concentration in the lower nM range. Changes in capping agent composition are detectable at NP concentrations in the g/L range. Thus, LDI-ToF-MS is particularly suitable for characterisation of polymer-capped NPs with high NP concentrations. This may be the case for quality control as part of the material synthesis and testing. Graphical abstract.
RESUMO
As effective light absorbers in solar cells, CsPbI3 all-inorganic perovskite quantum dots (QDs) have received increasing attention, benefitting from their suitable optical band gap and thermal stability. However, the easy cubic to yellow orthorhombic phase transition hinders their further application in stable photovoltaic devices. CsPbBr3 QDs have been targeted as a promising material for ultrahigh voltage and stable solar cells. In this work, we first develop a simple yet efficient post-treatment method using guanidinium thiocyanate (GASCN), which is able to exchange the native capping ligands of CsPbBr3 QDs, thus improving the carrier transport properties through enhanced electrical coupling between QDs. Additionally, the morphology and crystalline properties of solid QD films are also improved. Therefore, simultaneously improved open-circuit voltage (Voc), short-circuit current density (Jsc), and fill factor (FF) were obtained in the corresponding CsPbBr3 QD devices. Finally, the QD solar cells based on optimal hole-transporting layers delivered the highest efficiency exceeding 5% together with an ultrahigh Voc of 1.65 V, representing the most efficient CsPbBr3 QD solar cells to date. More importantly, the CsPbBr3 perovskite QD solar cells developed here exhibit excellent stability, ultrahigh voltage, and high transparency over the entire visible spectrum region, demonstrating their great potential in applications like solar windows of greenhouse and hydrogen generation driven by perovskite solar cells.