Alginate-Based Carriers Loaded with Mulberry (Morus alba L.) Leaf Extract: A Promising Strategy for Prolonging 1-Deoxynojirimicyn (DNJ) Systemic Activity for the Nutraceutical Management of Hyperglycemic Conditions.

The iminosugar 1-deoxynojirimicyn (DNJ) contained in mulberry leaves has displayed systemic beneficial effects against disorders of carbohydrate metabolism. Nevertheless, its effect is impaired by the short half-life. Alginate-based carriers were developed to encapsulate a DNJ-rich mulberry extract: Ca-alginate beads, obtained by external gelation, and spray-dried alginate microparticles (SDMs). Mean size and distribution, morphology, drug loading, encapsulation efficiency, experimental yield, and release characteristics were determined for the two formulations. Ca-alginate beads and SDMs exhibited an encapsulation efficiency of about 54% and 98%, respectively, and a DNJ loading in the range of 0.43-0.63 µg/mg. The in vitro release study demonstrated the carriers' capability in controlling the DNJ release in acid and basic conditions (<50% in 5 h), due to electrostatic interactions, which were demonstrated by 1H-NMR relaxometry studies. Thus, alginate-based particles proved to be promising strategies for producing food supplements containing mulberry leaf extracts for the management of hyperglycemic state.

Thermal, morphology and bacterial analysis of pH-responsive sodium carboxyl methylcellulose/ fumaric acid/ acrylamide nanocomposite hydrogels: Synthesis and characterization.

In this present investigation, sodium carboxymethyl cellulose grafted with Fumaric acid/Acrylamide (CMC/FA/AAm=CFA) hydrogel and their silver nanocomposite hydrogels (CFA-Ag x, x = 5, 10 and 20) were developed by simple, cost effective and ecofriendly greener method. Mint leaf extract was used as an efficient natural reducing agent due to presence of active and antioxidant potential of polyphenol and flavonoid components. Swelling equilibrium of CFA hydrogel showed Seq% 3000 both in pH medium and distilled water. CFA (90:10) hydrogel has been produced greater than Seq% 6000. The synthesized CFA (90:10)-Ag-5, CFA (90:10)-Ag-10 and CFA (90:10)-Ag-20 nanocomposite hydrogels have been observed lower Seq% 2000-3000 than the CFA hydrogel. The homogeneous distribution of AgNPs throughout the CFA hydrogel and nanocomposites has been explored by SEM analysis. The interaction of network heteroatoms with AgNPs has been strongly revealed by the FTIR spectra and XRD analysis. The thermal stability of CFA (90:10)-Ag-5, 10, and 20 nanocomposite hydrogels have showed greater stability than CFA hydrogel which is confirmed by TGA/DSC thermogram analysis. The TEM analysis was used to explore a uniform distribution of spherical AgNPs (10 nm-50 nm) embedded on the CFA composite hydrogel. The CFA (90:10)-Ag-20 nanocomposite hydrogel has showed good antibacterial activity beside E. coli (Gram positive) and S. aureus (Gram negative) pathogens. Based on the antibacterial activity and swelling properties of CFA-Ag nanocomposite hydrogels have the ability to accelerate the antibacterial activity and are potential candidates for medical and environmental applications.

Design and Development of Low- and Medium-Viscosity Alginate Beads Loaded with Pluronic® F-127 Nanomicelles.

The anionic polymer sodium alginate, a linear copolymer of guluronic and mannuronic acids, is primarily present in brown algae. Copolymers are used in the sodium alginate preparation process to confer on the material strength and flexibility. Micelles and other polymeric nanoparticles are frequently made using the triblock copolymer Pluronic® F-127. The purpose of the present study is to determine the effect of sodium alginate's viscosity (low and medium) and the presence of Pluronic® F-127 micelles on the swelling behavior of the prepared pure beads and those loaded with Pluronic® F-127 micelles. The Pluronic® F-127 nanomicelles have a size of 120 nm. The swelling studies were carried out at pH = 1.2 (simulated gastric fluid-SGF) for two hours and at pH = 6.8 (simulated intestinal fluid-SIF) for four more hours. The swelling of both low- and medium-viscosity alginate beads was minor at pH = 1.2, irrespective of the use of Pluronic® F-127 nanomicelles. At pH = 6.8, without Pluronic® F-127, the beads showed an enhanced swelling ratio for the first four hours, which was even higher in the medium-viscosity alginate beads. With the addition of Pluronic® F-127, the beads were dissolved in the first and second hour, in the case of the low- and medium-alginate's viscosity, respectively. In other words, the behavior of the mixed hydrogels was the same during the swelling experiments. Therefore, the presence of Pluronic® F-127 nanomicelles and medium-viscosity sodium alginate leads to a higher swelling ratio. A model drug, acetyl salicylic acid (ASA), was also encapsulated in the mixed beads and ASA's release studies were performed. In conclusion, the prepared systems, which are well characterized, show potential as delivery platforms for the oral delivery of active pharmaceutical ingredients and biopharmaceuticals.

Carbopol Based Hydrogels for ITOPRIDE Hydrochloride Delivery; Synthesis, Characterization and Comparative Assessment with Various Monomers.

The objective of the current study was to synthesize and characterize carbopol containing hydrogels with different monomers such as methacrylic acid (MAA), 2-acrylamido-2-methylpropane sulfonic acid (AMPS) and itaconic acid (ITA). Free radical polymerization method was optimized for the preparation of different formulations using N,N-methylene bis-acrylamide (MBA) as cross linking agent. Different studies were performed to evaluate the effect of different monomers on swelling, drug loading and drug release. Itopride Hydrochloride was used as model drug. FTIR, TGA, DSC and SEM were performed to probe the characteristics of fabricated hydrogels. Swelling studies of different fabricated hydrogels were performed in three pH conditions (1.2, 4.5 & 6.8). Higher swelling was observed at pH 6.8. An in-vitro release study was performed on pH 1.2 and 6.8. The synthesized hydrogels exhibited excellent mechanical strength, higher drug loading, pH sensitive and time dependent release up to 30 h. The excellent mechanical strength and extended drug release of Carbopol-co-poly-MAA-ITA hydrogels make them a potential candidate for controlled delivery of Itopride hydrochloride.

Lower Critical Solution Temperature Tuning and Swelling Behaviours of NVCL-Based Hydrogels for Potential 4D Printing Applications.

The phase transitions of poly (N-vinyl caprolactam) (PNVCL) hydrogels are currently under investigation as possible materials for biomedical applications thanks to their thermosensitive properties. This study aims to use the photopolymerisation process to simulate the 4D printing process. NVCL-based polymers with different thermal properties and swellability were prepared to explore the possibility of synthetic hydrogels being used for 4D printing. In this contribution, the thermal behaviours of novel photopolymerised NVCL-based hydrogels were analysed. The lower critical solution temperature (LCST) of the physically crosslinked gels was detected using differential scanning calorimetry (DSC), ultraviolet (UV) spectroscopy, and cloud point measurement. The chemical structure of the xerogels was characterised by means of Fourier transform infrared spectroscopy (FTIR). Pulsatile swelling studies indicated that the hydrogels had thermo-reversible properties. As a result, the effect of varying the macromolecular monomer concentration was apparent. The phase transition temperature is increased when different concentrations of hydrophilic monomers are incorporated. The transition temperature of the hydrogels may allow for excellent flexibility in tailoring transition for specific applications, while the swelling and deswelling behaviour of the gels is strongly temperature- and monomer feed ratio-dependent.

One pot synthesis of new poly(vinyl alcohol) blended natural polymer based magnetic hydrogel beads: Controlled natural anticancer alkaloid delivery system.

Facile one-pot synthesis has been demonstrated for new biocompatible and dual responsive magnetic iron oxide nanoparticles cross-linked poly(vinyl alcohol) (PVA) blended natural polymer chitosan (CS) based hydrogel beads (mCS-PVA) as a controlled natural anticancer alkaloid Luotonin A (LuA) delivery system. The prepared magnetic hydrogel beads were characterized using powder X-ray diffraction measurement, Fourier transform-infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, and vibrating sample magnetometer. The magnetic hydrogel beads are exhibited significant water retention and follow the second order kinetic model in swelling study. The swelling ratio of the magnetic gel beads increased by the addition of PVA and showed a maximum swelling ratio of 40.83 ± 1.01 g/g and follows non-Fickian water transport mechanism. Stimuli responsive mCS and mCS-PVA hydrogel beads functionalized with LuA is demonstrated for controlled release at physiological pH and under magnetic field. The magnetic hydrogel beads show highest LuA releasing efficacy at acidic medium (pH = 5.0) with maximum efficiency of 73.33 ± 1.44%. This efficacy may also be tuned by altering the external magnetic field as well as the weight percentage (wt %) of polyethylene glycol. It is clearly that the newly produced magnetic hydrogel beads can be served as an effective intestinal LuA delivery system. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 543-551, 2018.

Magnetic iron oxide nanoparticles (MIONs) cross-linked natural polymer-based hybrid gel beads: Controlled nano anti-TB drug delivery application.

The nanosized rifampicin (RIF) has been prepared to increase the solubility in aqueous solution, which leads to remarkable enhancement of its bioavailability and their convenient delivery system studied by newly produced nontoxic, biodegradable magnetic iron oxide nanoparticles (MIONs) cross-linked polyethylene glycol hybrid chitosan (mCS-PEG) gel beads. The functionalization of both nano RIF and mCS-PEG gel beads were studied using various spectroscopic and microscopic techniques. The size of prepared nano RIF was found to be 70.20 ± 3.50 nm. The mechanical stability and swelling ratio of the magnetic gel beads increased by the addition of PEG with a maximum swelling ratio of 38.67 ± 0.29 g/g. Interestingly, this magnetic gel bead has dual responsive assets in the nano drug delivery application (pH and the magnetic field). As we expected, magnetic gel beads show higher nano drug releasing efficacy at acidic medium (pH = 5.0) with maximum efficiency of 71.00 ± 0.87%. This efficacy may also be tuned by altering the external magnetic field and the weight percentage (wt%) of PEG. These results suggest that such a dual responsive magnetic gel beads can be used as a potential system in the nano drug delivery applications. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1039-1050, 2018.

Natural dendrimers: Synthesis and in vitro characterization of glycogen-cysteamine conjugates.

The aim of this study was to synthesize, characterize and evaluate the mucoadhesive properties of the first thiolated hyperbranched natural polysaccharide with biodegradability and biocompatibility features. In detail, glycogen-cysteamine conjugates were synthesized through a first step of oxidative ring opening applying increasing concentrations of sodium periodate, to obtain polymers with different degrees of oxidation, and a second step of reductive amination with a constant amount of cysteamine. The obtained glycogen-cysteamine conjugates were characterized regarding their content of free and total thiol groups by Ellman's assay, biocompatibility, swelling/erosion behavior, rheological synergism and mucoadhesive properties in comparison to the unmodified glycogen. The higher the concentration of periodate was, the higher was the content of total thiol groups being in the range of 255.7±12-1194.5±82µmol/g, biocompatibility remained unaffected by these structural changes. On the contrary, the mucoadhesive properties, evaluated by tensile, rheological synergism and rotating cylinder studies, appear to be influenced by the thiol groups concentration on the glycogen. In particular the glycogen-cysteamine conjugate exhibiting the highest degree of thiolation showed a 79-fold increase in viscosity over a time period of 8h, as well as, remained attached on freshly excised porcine mucosa 32-fold longer than the unmodified polymer. The higher was the amount of conjugated thiol groups, the higher was the water absorption capacity of glycogen-cysteamine tablets in Simulated Intestinal Fluid pH 6.8 (SIF). The introduction of thiol moieties on polymer changed the characteristics of the polysaccharide by improving mucoadhesion properties. Therefore, this work represents the first study describing thiolated natural dendrimers as potential platform useful to realize appropriate mucoadhesive nanocarrier systems suitable to prolong mucosal residence time.

Lidocaine-loaded fish scale-nanocellulose biopolymer composite microneedles.

Microneedle (MN) technology has emerged as an effective drug delivery system, and it has tremendous potential as a patient friendly substitute for conventional methods for transdermal drug delivery (TDD). In this paper, we report on the preparation of lidocaine-loaded biodegradable microneedles, which are manufactured from fish scale-derived collagen. Lidocaine, a common tissue numbing anaesthetic, is loaded in these microneedles with an aim of delivering the drug with controlled skin permeation. Evaluation of lidocaine permeation in porcine skin has been successfully performed using Franz diffusion cell (FDC) which has shown that the drug permeation rate increases from 2.5 to 7.5% w/w after 36 h and pseudo steady state profile is observed from 5.0 to 10.0% w/w lidocaine-loaded microneedle. Swelling experiments have suggested that the microneedles have negligible swellability which implies that the patch would stick to the tissue when inserted. The experiments on MN dissolution have depicted that the lidocaine loaded in the patch is lower than the theoretical loading, which is expected as there can be losses of the drug during initial process manufacture.

Non toxic, antibacterial, biodegradable hydrogels with pH-stimuli sensitivity: Investigation of swelling parameters.

In this work, a series of pH-sensitive hydrogels were synthesized from Sodium alginate (SA), Ethylene glycol (EG) and Acrylic acid (AA). Biodegradability of hydrogel was tested against soil burial test for 35days and in vitro phosphate buffer solution test for 10days respectively. Degradation of the sample might be due to the breakdown of ester linkage and hydrophilic pendant functionality present in hydrogel. The progression of biodegradation was examined by Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Detailed swelling parameters such as swelling equilibrium Seq (%) at various pH, biological fluids (distilled water (DW), physiological saline 0.89% NaCl (PS), iso-osmotic phosphate buffer at pH 7.4 (PB)) and equilibrium water content (EWC) have also been investigated, which revealed that dynamic compassion of hydrogels. The hydrogel has shown strong antibacterial activity against Escherichia coli (gram negative) and Staphylococcus aureus (gram positive) bacteria's. Cytotoxic assays, using MTT Assay in 3T3 fibroblast Cell line was performed. At 10µg/ml, cell viability was in the range of 92-94%. However, the cell viability (%) decreases with increasing concentration of sample. The synergistic effect of biodegradable hydrogels possessing excellent swelling properties, high water content, biocompatibility and wound healing tendency using in vivo test can be made as suitable candidate for biomedical applications. In vivo wound healing studies conducted on a Wister albino rat model of incision wound performed for 9days. The results revealed that more accelerated wound healing have been observed even in shorter duration. Thus, the synthesized hydrogel with great pH-responsiveness and excellent drug delivery may have a great opening for biomedical applications.

Comparison of Hydrogels Based on Commercial Chitosan and Beetosan® Containing Nanosilver.

Two series of hydrogels on the basis of commercial chitosan and chitosan derived from naturally expired honeybees are presented in this article. Sorption capacity and behavior of both kind of materials in simulated body fluids such as Ringer's liquid or artificial saliva have been determined and compared. Presence of functional groups in synthesized materials have been determined by means of FT-IR spectroscopy. Structure and homogeneity of their surface have been defined using Scanning Electron Microscopy. Based on the conducted research, it can be stated that both chitosan and Beetosan® hydrogels have very similar characteristics. It is worth noting that synthesis of such materials is environmentally friendly and leads to obtaining polymers that can be used for biomedical applications. Tested materials are characterized by low sorption capacity and do not have a negative impact on simulated body fluids. Moreover, based on the cell lines studies, it can be stated that Beetosan® hydrogels have a negative influence on cells of cancerous origin and, what is important, significantly less adverse effects on fibroblasts.

Caracterização do intumescimento de sistemas líquido-cristalinos de fase lamelar de monoleína e água contendo polihexametilenobiguanida / Characterization of swelling of lamellar phases of monoolein and water containing polyhexamethylenebiguanide

A monoleína é um lipídeo polar capaz de absorver água e formar sistemas líquido-cristalinos, os quais são utilizados como sistemas de liberação para administração de vários fármacos. Neste estudo foi avaliado o potencial de sistemas de fase lamelar constituídos por monoleína e água para veicular polihexametilenobiguanida (PHMB). A formação dos sistemas líquido-cristalinos foi caracterizada por microscopia de luz polarizada. Estudos de intumescimento foram realizados gravimetricamente em várias condições avaliando-se os efeitos de parâmetros como pH, força iônica e temperatura do meio de imersão. O processo de intumescimento foi caracterizado através da obtenção dos perfis de intumescimento e análise de sua cinética, além da determinação da capacidade máxima de intumescimento dos sistemas. Os sistemas de fase lamelar foram obtidos em presença de PHMB, os quais absorveram água rapidamente de acordo com cinética de segunda ordem e sofreram transição de fase, formando a fase cúbica. O intumescimento dos sistemas não foi influenciado pela presença do fármaco nos vários meios de imersão estudados, exceto pela imersão em meio ácido, no qual a presença do PHMB aumentou a captação de água. O intumescimento dos sistemas contendo PHMB não foi afetado pela força iônica do meio de imersão, porém foi diminuído com o aumento da temperatura. Desta maneira, sistemas líquido-cristalinos de monoleína e água foram obtidos e o processo de intumescimento foi caracterizado. Os sistemas apresentaram potencial para serem propostos como sistemas de liberação para administração de PHMB e estudos de liberação de fármacos serão realizados futuramente.

Monoolein is a polar lipid that absorbs water and forms liquid crystalline systems that are used as drug delivery systems for different medications. The aim of the present study was to investigate lamellar phases formed by monoolein and water as potential vehicles for the administration of polyhexamethylene biguanide (PHMB). Lamellar phase systems formed by monoolein and water containing PHMB were characterized by polarizing microscopy. Swelling studies were performed gravimetrically under different conditions for the evaluation of the effects of pH, ionic strength and temperature. Analyses of swelling profiles, swelling kinetics and maximum swelling capacity were performed. The lamellar phase systems of monoolein and water obtained in the presence of PHMB absorbed water very quickly following second-order swelling kinetics and formed a cubic phase. The swelling of the systems was not influenced by the presence of the drug in the immersion media studied, except under acidic conditions, in which the drug exhibited increased water uptake. The swelling of systems containing PHMB was not affected by the ionic strength of the immersion media, but was reduced with an increase in temperature. Liquid crystalline systems of monoolein and water were obtained and swelling behavior was investigated. The systems exhibited the potential for use as a drug delivery system for PHMB administration. However, further drug-release studies should be performed.