An Investigation of the Photonic Application of TeO2-K2TeO3-Nb2O5-BaF2 Glass Co-Doped with Er2O3/Ho2O3 and Er2O3/Yb2O3 at 1.54 µm Based on Its Thermal and Luminescence Properties.

A glass composition using TeO2-K2TeO3-Nb2O5-BaF2 co-doped with Er2O3/Ho2O3 and Er2O3/Yb2O3 was successfully fabricated. Its thermal stability and physical parameters were studied, and luminescence spectroscopy of the fabricated glasses was conducted. The optical band gap, Eopt, decreased from 2.689 to 2.663 eV following the substitution of Ho2O3 with Yb2O3. The values of the refractive index, third-order nonlinear optical susceptibility (χ(3)), and nonlinear refractive index (n2) of the fabricated glasses were estimated. Furthermore, the Judd-Ofelt intensity parameters Ωt (t=2,4,6), radiative properties such as transition probabilities (Aed), magnetic dipole-type transition probabilities (Amd), branching ratios (ß), and radiative lifetime (τ) of the fabricated glasses were evaluated. The emission cross-section and FWHM of the 4I13/2→4I15/2 transition around 1.54 µm of the glass were reported, and the emission intensity of the visible signal was studied under 980 nm laser excitation. The material might be a useful candidate for solid lasers and nonlinear amplifier devices, especially in the communications bands.

Investigation of Thermal and Spectroscopic Properties of Tellurite-Based Glasses Doped with Rare-Earth Oxides for Infrared Solid-State Lasers.

The thermal and optical properties of 60TeO2-20K2TeO3-10WO3-10Nb2O5 (in mol%) glasses doped with Ho2O3, Er2O3, and Tm2O3 were explored in the present work. The thermal stability, refractive index n, extinction coefficient k, absorption coefficient α, and optical band gap of the glasses were evaluated. The UV-Vis-NIR absorption spectra, the Judd-Ofelt intensity parameter, the spectroscopic quality factor, and the emission and absorption cross-sections were calculated to investigate the effects of Er3+ and Tm3+, respectively, on the band spectroscopic properties of Ho3+ ions. The results showed that the maximum emission cross-section was approximately 8×10-21 cm2, and the values of the full width at half maximum (FWHM), quality factor (σe×FWHM), and gain coefficient of Ho3+: 5I7→5I8 were also reported. The value of the FWHM×σe was 1200×10-28 cm3, which showed greater gain characteristics than earlier study results. For 2 µm mid-infrared solid-state lasers, the glasses that were examined might be a good host material.

Near-infrared luminescence of Er3+ in MoO3/WO3 modified tellurite glass.

In this work, the network structure of Er3+ doped tellurite glass was modified by incorporating MoO3/WO3 oxides and the effect of the structural modification on the near-infrared luminescence properties of Er3+ was investigated. The examination of fluorescence spectrum reveals that partial substituting TeO2 with MoO3/WO3 in the composition significantly enhances both the emission intensity and the FWHM (full width at half maximum) of the 1.53 µm band, and the improved local environment around Er3+ ions and phonon energy of glass host are considered to be responsible for these results. The XRD pattern, Raman spectrum and Judd-Ofelt intensity parameter disclosed the changes in network structure and phonon energy, the DSC curve showed an improvement in thermal stability, and fluorescence decay curve displayed the increase of Er3+ lifetime at the 4I13/2 level, all of these indicated the positive effect of MoO3/WO3 addition on the near-infrared luminescence properties of Er3+.

Antimicrobial efficacy and amino acid substitutions associated with susceptibility to the tellurium compound AS101 against Haemophilus influenzae and Haemophilus parainfluenzae.

The tellurite toxicity in Haemophilus influenzae and H. parainfluenzae remains unclear. To understand the potential of tellurite as a therapeutic option for these bacteria, we investigated the antimicrobial efficacy of AS101, a tellurium compound, against H. influenzae and H. parainfluenzae and the molecular basis of their differences in AS101 susceptibility. Through broth microdilution, we examined the minimum inhibitory concentration (MIC) of AS101 in 51 H. influenzae and 28 H. parainfluenzae isolates. Whole-genome sequencing was performed on the H. influenzae isolates to identify genetic variations associated with AS101 susceptibility. The MICs of AS101 were ≦ 4, 16-32, and ≧ 64 µg/mL in 9 (17.6%), 12 (23.5%), and 30 (58.8%) H. influenzae isolates, respectively, whereas ≦ 0.5 µg/mL in all H. parainfluenzae isolates, including multidrug-resistant isolates. Time-killing kinetic assay and scanning electron microscopy revealed the in vitro bactericidal activity of AS101 against H. parainfluenzae. Forty variations in nine tellurite resistance-related genes were associated with AS101 susceptibility. Logistic regression, receiver operator characteristic curve analysis, Venn diagram, and protein sequence alignment indicated that Val195Ile substitution in TerC, Ser93Gly in Gor (glutathione reductase), Pro44Ala/Ala50Pro in NapB (nitrate reductase), Val307Leu in TehA (tellurite resistance protein), Cys105Arg in CysK (cysteine synthase), and Thr364Ser in Csd (Cysteine desulfurase) were strongly associated with reduced AS101 susceptibility, whereas Ser155Pro in TehA with increased AS101 susceptibility. In conclusions, the antimicrobial efficacy of AS101 is high against H. parainfluenzae but low against H. influenzae. Genetic variations and corresponding protein changes relevant to AS101 non-susceptibility in H. influenzae were identified.

Structure and Spectral Properties of Er3+-Doped Bismuth Telluride Near-Infrared Laser Glasses.

TeO2-Bi2O3-B2O3-ZnO laser glasses doped with Er3+ were synthesized through an optimized melt-quenching method. The absorption spectra at 808 nm LD pumping were studied. Various spectral tests and data analyses indicate that the maximum fluorescence emission intensity can be obtained when the Er3+ doping concentration reaches 2%. In this case, the emission cross-section can reach up to 9.12 × 10-21 cm2 and the gain coefficient at 1.55 µm is 6.17 cm-1. Simultaneously, the sample has a lower phonon energy in the high-frequency band at 1077 cm-1, which reduces the probability of non-radiative relaxation. The calculated energy transfer coefficient CD-A is 13.8 × 10-40 cm6/s, reflecting the high cross-relaxation probability of Er3+ in the sample, which promotes the luminescence of 1.55 µm and favors the emission in the near-infrared region. The comprehensive results demonstrate that the prepared Er3+-doped bismuth telluride laser glass can be used as a promising and high-quality gain material for near-infrared lasers.

"Golgi-customized Trojan horse" nanodiamonds impair GLUT1 plasma membrane localization and inhibit tumor glycolysis.

Nutrient or energy deprivation, especially glucose restriction, is a promising anticancer therapeutic approach. However, establishing a precise and potent deprivation strategy remains a formidable task. The Golgi morphology is crucial in maintaining the function of transport proteins (such as GLUT1) driving glycolysis. Thus, in this study, we present a "Golgi-customized Trojan horse" based on tellurium loaded with apigenin (4',5,7-trihydroxyflavone) and human serum albumin, which was able to induce GLUT1 plasma membrane localization disturbance via Golgi dispersal leading to the inhibition of tumor glycolysis. Diamond-shaped delivery system can efficiently penetrate into cells as a gift like Trojan horse, which decomposes into tellurite induced by intrinsically high H2O2 and GSH levels. Consequently, tellurite acts as released warriors causing up to 3.8-fold increase in Golgi apparatus area due to the down-regulation of GOLPH3. Further, this affects GLUT1 membrane localization and glucose transport disturbance. Simultaneously, apigenin hinders ongoing glycolysis and causes significant decrease in ATP level. Collectively, our "Golgi-customized Trojan horse" demonstrates a potent antitumor activity because of its capability to deprive energy resources of cancer cells. This study not only expands the applications of tellurium-based nanomaterials in the biomedicine but also provides insights into glycolysis restriction for anticancer therapy.

Achieving ultrafast and highly selective capture of radiotoxic tellurite ions on iron-based metal-organic frameworks through coordination bond-dominated conversion.

Chemically durable and effective adsorbents for radiotoxic TeOx2- (TeIV and TeVI) anions remain in great demand for contamination remediation. Herein, a low-cost iron-based metal-organic framework (MIL-101(Fe)) was used as an adsorbent to capture TeOx2- anions from contaminated solution with ultrafast kinetics and record-high adsorption capacity of 645 mg g-1 for TeO32- and 337 mg g-1 for TeO42-, outperforming previously reported adsorbents. Extended X-ray absorption fine structure (EXAFS) and density functional theory (DFT) calculations confirmed that the capture of TeOx2- by MIL-101(Fe) was mediated by the unique C-O-Te and Fe-O-Te coordination bonds at corresponding optimal adsorption sites, which enabled the selective adsorption of TeOx2- from solution and further irreversible immobilization under the geological environment. Meanwhile, MIL-101(Fe) works steadily over a wide pH range of 4-10 and at high concentrations of competing ions, and it is stable under ß-irradiation even at high dose of 200 kGy. Moreover, the MIL-101(Fe) membrane was fabricated to efficiently remove TeO32- ions from seawater for practical use, overcoming the secondary contamination and recovery problems in powder adsorption. Finally, the good sustainability of MIL-101(Fe) was evaluated from three perspectives of technology, environment, and society. Our strategy provides an alternative to traditional removal methods that should be attractive for Te contamination remediation.

Giant Optical Anisotropy in a Covalent Molybdenum Tellurite via Oxyanion Polymerization.

Large birefringence is a crucial but hard-to-achieve optical parameter that is a necessity for birefringent crystals in practical applications involving modulation of the polarization of light in modern opto-electronic areas. Herein, an oxyanion polymerization strategy that involves the combination of two different types of second-order Jahn-Teller distorted units is employed to realize giant anisotropy in a covalent molybdenum tellurite. Mo(H2O)Te2O7 (MTO) exhibits a record birefringence value for an inorganic UV-transparent oxide crystalline material of 0.528 @ 546 nm, which is also significantly larger than those of all commercial birefringent crystals. MTO has a UV absorption edge of 366 nm and displays a strong powder second-harmonic generation response of 5.4 times that of KH2PO4. The dominant roles of the condensed polytellurite oxyanions [Te8O20]8- in combination with the [MoO6]6- polyhedra in achieving the giant birefringence in MTO are clarified by structural analysis and first-principles calculations. The results suggest that polymerization of polarizability-anisotropic oxyanions may unlock the promise of birefringent crystals with exceptional birefringence.

The tellurite resistance gene cluster of pathogenic bacteria and its effect on oxidative stress response.

Tellurite resistance gene clusters have been identified in numerous pathogenic bacteria, including clinical isolates of Escherichia coli. The rareness of tellurium in host organisms and the noncontaminated environment raises a question about the true functionality of tellurite resistance gene clusters in pathogenesis and their possible contribution to bacterial fitness. The study aims to point out the beneficial effects of the tellurite resistance gene cluster of pathogenic bacteria to survive in ROS-rich environments. Here, we analysed the bacterial response to oxidative stress conditions with and without tellurite resistance gene clusters, which are composed of terWY1XY2Y3 and terZABCDEF genes. By measuring the levels of protein carbonylation, lipid peroxidation, and expression changes of oxidative stress genes upon oxidative stress, we propose a tellurite resistance gene cluster contribution to the elimination of oxidative damage, potentially increasing fitness and resistance to reactive oxygen species during macrophage attack. We have shown a different beneficial effect of various truncated versions of the tellurite resistance gene cluster on cell survival. The terBCDEF genes increased the survival of E. coli strain MC4100 by 13.21%, terW and terZABCDEF by 10.09%, and terWY1XY2Y3 and terZABCDEF by 25.57%, respectively. The ability to survive tellurite treatment is the most significant at 44.8% in wild clinical strain KL53 compared to laboratory strain E. coli MC4100 due to a complete wild-type plasmid presence.

Study of gamma radiation shielding on tellurite glass containing TiO2 and Al2O3 nanoparticles.

Radiation shielding incorporates material between the radioactive source and environment to decrease exposure to hazardous radiation. It remains to be seen whether the addition of nanoparticles effectively increases the protection of tellurite glass system from further degradation under irradiation conditions. This study revealed the gamma radiation effects on tellurite glass. The tellurite glass samples were irradiated with 50 kGy and 100 kGy gamma ray, and subsequently analysed using X-ray diffractometer (XRD), atomic force microscopy (AFM), and ultraviolet-visible spectroscopy (UV-Vis). Gamma radiation increased the creation of non-bridging oxygen (NBO) and caused colour change on TZNETi and TZNETiAl glasses. Consequently, the addition of aluminium oxides (Al2O3) was found to lower the density of glass systems. The glass samples surface roughness increased, while the optical transmission spectra decreased after 50 kGy of gamma ray irradiation. Nevertheless, the glass system maintained its transparency even after irradiation. The mass attenuation coefficient (MAC) values represented the shielding effectiveness demonstrated by the investigated glass with the addition of Al2O3. The physical, structural, optical, and radiation shielding properties showed that 69.1TeO2-20ZnO-9Na2O-1Er2O3-0.3TiO2-0.6Al2O3 (TZNETiAl) sample exhibited strong shielding properties amongst the fabricated tellurite samples.

Judd-Ofelt Analysis and Spectroscopy Study of Tellurite Glasses Doped with Rare-Earth (Nd3+, Sm3+, Dy3+, and Er3+).

A series of glasses based on (80-y) TeO2-20 BiCl3-y RE2O3 (y = 0, 0.6 mol%; RE = Nd, Sm, Dy, and Er) were prepared. The thermal stability of the glass was determined by differential scanning calorimetry (DSC). The density and optical energy values of the prepared glass increased in the order of Sm2O3, Nd2O3, Dy2O3, and Er2O3. In addition, the glass doped with Er2O3 had the highest refractive index values compared to the other samples. Subsequently, Judd-Ofelt parameters (Ω2, Ω4, and Ω6) were obtained for the family of RE3+ trivalent rare-earth ions introduced as dopants in a tellurite glass. These parameters were calculated from the absorption spectra for each RE3+. The structures were studied by Raman spectroscopy deconvolution, which determined that TeO4, TeO3, TeO3+1, BiO6, and BiCl6 units had formed. In addition, the structural changes in the glass are related to the intensity ratio of TeO4/TeO3, depending on the type of rare-earth. For the optics and Judd-Ofelt parameters, the ray spectroscopy results of the prepared glass show that it is a good candidate for nonlinear optics fibers, a solid laser material.

Gordonia metallireducens sp. nov., a tellurite- and selenite-resistant bacterium isolated from the sediment of an acid mine drainage stream.

A polyphasic taxonomic study was carried out on strain TSed Te1T, isolated from sediment of a stream contaminated with acid drainage from a coal mine. The bacterium forms pink-pigmented colonies and has a rod-coccus growth cycle, which also includes some coryneform arrangements. This bacterium is capable of growing in the presence of up to 750 µg ml-1 tellurite and 5000 µg ml-1 selenite, reducing each to elemental form. Nearly complete 16S rRNA gene sequence analysis associated the strain with Gordonia, with 99.5 and 99.3 % similarity to Gordonia namibiensis and Gordonia rubripertincta, respectively. Computation of the average nucleotide identity and digital DNA-DNA hybridization comparisons with the closest phylogenetic neighbour of TSed Te1T revealed genetic differences at the species level, which were further substantiated by differences in several physiological characteristics. The dominant fatty acids were C16 : 0, C18 : 1, C16 : 1 and tuberculostearic acid. The DNA G+C content was 67.6 mol%. Major polar lipids were diphosphatidylglycerol, phosphatidylethanolamine, phosphatidylinositol and phosphatidylinositol mannoside, while MK-9(H2) was the only menaquinone found. Mycolic acids of C56-C60 were present. Whole-cell hydrolysates contained meso-diaminopimelic acid along with arabinose and galactose as the major cell-wall sugars. On the basis of the results obtained in this study, the bacterium was assigned to the genus Gordonia and represents a new species with the name Gordonia metallireducens sp. nov. The type strain is TSed Te1T (=NRRL B-65678T=DSM 114093T).

The cryptic step in the biogeochemical tellurium (Te) cycle: Indirect elementary Te oxidation mediated by manganese-oxidizing bacteria Bacillus sp. FF-1.

Tellurium (Te) is a rare element within the chalcogen group, and its biogeochemical cycle has been studied extensively. Tellurite (Te(IV)) is the most soluble Te species and is highly toxic to organisms. Chemical or biological Te(IV) reduction to elemental tellurium (Te0) is generally considered an effective detoxification route for Te(IV)-containing wastewater. This study unveils a previously unnoticed Te0 oxidation process mediated by the manganese-oxidizing bacterium Bacillus sp. FF-1. This bacterium, which exhibits both Mn(II)-oxidizing and Te(IV)-reducing abilities, can produce manganese oxides (BioMnOx) and Te0 (BioTe0) when exposed to Mn(II) and Te(IV), respectively. When 5 mM Mn(II) was added after incubating 0.1 mM or 1 mM Te(IV) with strain FF-1 for 16 h, BioTe0 was certainly re-oxidized to Te(IV) by BioMnOx. Chemogenic and exogenous biogenic Te0 can also be oxidized by BioMnOx, although at different rates. This study highlights a new transformation process of tellurium species mediated by manganese-oxidizing bacteria, revealing that the environmental fate and ecological risks of Te0 need to be re-evaluated.

Possible solution of capturing viable Enterohemorrhagic Escherichia coli (EHEC) in clinical patient stool.

For clinical diagnosis of enterohemorrhagic Escherichia coli (EHEC）, it needs to capture viable EHEC cells from stool sample in the view of medical fee points. However, there is no comprehensive solution for the detection of viable EHEC cells since there are wide variety of serotype and susceptibility against potassium tellurite which is commonly used for selective agent in selective medium for EHEC. In these background, EHEC Clear-HT System (EHEC-CHT）, a novel effective chromogenic medium system for screening comprehensive viable EHEC, was developed. When EHEC-CHT was assessed using 128 microbes including 49 clinical isolated EHEC strains, EHEC-CHT detected all 49 EHEC strains as typical blue-colored colony regardless of both serotype and susceptibility to potassium tellurite. EHEC-CHT was compared with Japanese commercially available tellurite-based EHEC selective media using 107 clinical patient stool samples. EHEC-CHT showed higher detection ratio than conventional tellurite-based selective media compared, and 7% improvement at least in detection ratio in this study.

Evaluating the incidence of ampC-ß-lactamase genes, biofilm formation, and antibiotic resistance among hypervirulent and classical Klebsiella pneumoniae strains.

AIM: Both immunocompetent and healthy individuals can become life-threateningly ill when exposed to the hypervirulent (hvKp) strains of Klebsiella pneumoniae (Kp). The main objectives of this study were to evaluate the presence of ampC-lactamase genes, biofilm formation, and antibiotic resistance in clinical strains of hvKp and cKp (classical K. pneumoniae). MATERIALS AND METHODS: Kp strains were collected from patients referred to Shahidzadeh Hospital in Behbahan City, Khuzestan Province, Iran. Several techniques were used to identify hvKp. The hypermucoviscosity phenotype was determined using the string test. Isolates that developed dark colonies on tellurite agar were assumed to be hvKp strains. If any of the iucA, iutA, or peg-344 genes were detected, the isolates were classified as hvKp. Phenotypic and genotypic detection of AmpC ß-lactamases of hvKp strains was performed by the combined disk method and polymerase chain reaction, respectively. In addition, crystal violet staining was used to determine the biofilm formation of these isolates. RESULTS: For this study, 76 non-duplicative isolates of Kp were collected. Overall, 22 (28.94%) strains had positive string test results, and 31 (40.78%) isolates were grown in tellurite-containing medium. The genes iucA and iutA or peg-344 were found in 23.68% of all Kp strains and in 50% of tellurite-resistant isolates, respectively. The most effective antibiotics against hvKp isolates were tetracycline (85.52%) and chloramphenicol (63.15%). Using the cefoxitin disc diffusion method, we observed that 56.57% (43/76) of the strains were AmpC producer. A total of 30.26% (n = 23/76) of the isolates tested positive for at least one ampC gene, including blaDHA (52.63%, n = 40), blaCIT (40.78%, n = 31), blaACC (19.76%, n = 15), blaMOX (25%, n = 19), and blaFOX (43.42%, n = 33). Biofilm formation analysis revealed that most hvKp isolates were weak (n = 6, 40%) and moderate (n = 5, 33.33%) biofilm producers. CONCLUSION: Healthcare practitioners should consider the possibility of the existence and acquisition of hvKp everywhere. The exact mechanisms of bacterial acquisition are also unknown, and it is unclear whether the occurrence of infections is related to healthcare or not. Thus, there are still many questions about hvKp that need to be investigated.

Raman Lasing in a Tellurite Microsphere with Thermo-Optical on/off Switching by an Auxiliary Laser Diode.

The generation of coherent light based on inelastic stimulated Raman scattering in photonic microresonators has been attracting great interest in recent years. Tellurite glasses are promising materials for such microdevices since they have large Raman gain and large Raman frequency shift. We experimentally obtained Raman lasing at a wavelength of 1.8 µm with a frequency shift of 27.5 THz from a 1.54 µm narrow-line pump in a 60 µm tellurite glass microsphere with a Q-factor of 2.5 × 107. We demonstrated experimentally a robust, simple, and cheap way of thermo-optically controlled on/off switching of Raman lasing in a tellurite glass microsphere by an auxiliary laser diode. With a permanently operating narrow-line pump laser, on/off switching of the auxiliary 405 nm laser diode led to off/on switching of Raman generation. We also performed theoretical studies supporting the experimental results. The temperature distribution and thermal frequency shifts in eigenmodes in the microspheres heated by the thermalized power of an auxiliary diode and the partially thermalized power of a pump laser were numerically simulated. We analyzed the optical characteristics of Raman generation in microspheres of different diameters. The numerical results were in good agreement with the experimental ones.

1337 nm Emission of a Nd3+-Doped TZA Glass Random Laser.

Random lasers have been studied using many materials, but only a couple have used glass matrices. Here, we present a study of zinc tellurite and aluminum oxide doped with different percentages of neodymium oxide (4 wt.%, 8 wt.%, and 16 wt.%) and demonstrate for the first time random laser action at 1337 nm. Laser emission was verified and the laser pulse's rise time and input-output power slope were obtained. A cavity composed of the sample's pump surface and an effective mirror formed by a second, parallel layer at the gain-loss boundary was probably the main lasing mechanism of this random laser system. The reason for the absence of emission at 1064 nm is thought to be a measured temperature rise in the samples' active volume.

Insights into the Synergistic Antibacterial Activity of Silver Nitrate with Potassium Tellurite against Pseudomonas aeruginosa.

The constant, ever-increasing antibiotic resistance crisis leads to the announcement of "urgent, novel antibiotics needed" by the World Health Organization. Our previous works showed a promising synergistic antibacterial activity of silver nitrate with potassium tellurite out of thousands of other metal/metalloid-based antibacterial combinations. The silver-tellurite combined treatment not only is more effective than common antibiotics but also prevents bacterial recovery, decreases the risk of future resistance chance, and decreases the effective concentrations. We demonstrate that the silver-tellurite combination is effective against clinical isolates. Further, this study was conducted to address knowledge gaps in the available data on the antibacterial mechanism of both silver and tellurite, as well as to give insight into how the mixture provides synergism as a combination. Here, we defined the differentially expressed gene profile of Pseudomonas aeruginosa under silver, tellurite, and silver-tellurite combination stress using an RNA sequencing approach to examine the global transcriptional changes in the challenged cultures grown in simulated wound fluid. The study was complemented with metabolomics and biochemistry assays. Both metal ions mainly affected four cellular processes, including sulfur homeostasis, reactive oxygen species response, energy pathways, and the bacterial cell membrane (for silver). Using a Caenorhabditis elegans animal model we showed silver-tellurite has reduced toxicity over individual metal/metalloid salts and provides increased antioxidant properties to the host. This work demonstrates that the addition of tellurite would improve the efficacy of silver in biomedical applications. IMPORTANCE Metals and/or metalloids could represent antimicrobial alternatives for industrial and clinical applications (e.g., surface coatings, livestock, and topical infection control) because of their great properties, such as good stability and long half-life. Silver is the most common antimicrobial metal, but resistance prevalence is high, and it can be toxic to the host above a certain concentration. We found that a silver-tellurite composition has antibacterial synergistic effect and that the combination is beneficial to the host. So, the efficacy and application of silver could increase by adding tellurite in the recommended concentration(s). We used different methods to evaluate the mechanism for how this combination can be so incredibly synergistic, leading to efficacy against antibiotic- and silver-resistant isolates. Our two main findings are that (i) both silver and tellurite mostly target the same pathways and (ii) the coapplication of silver with tellurite tends not to target new pathways but targets the same pathways with an amplified change.

Physical and optical properties of ternary lead-bismuth tellurite glass.

A series of six lead-bismuth tellurite glass samples were prepared by using the melt quenching technique. The Physical properties of the samples such as density and molar were studied. The measurements of density were calculated via using Archimedes' principle. XDR technique was used to confirm the amorphous nature of the samples. The optical properties of the samples such as direct and indirect bandgaps were calculated based on the Davis-Mott equation by employing Tauc's method. The disorderliness of the glass system was measured by calculating Urbach energy and steepness. Density and refractive indices results show an increasing trend with increasing PbO concentration. The non-metallic nature of the samples was investigated by using the metallization criterion. Optical basicity and basicity moderating parameters were calculated for each glass sample by using Duffy and Ingram formula. The metallization criterion results of the synthesized glasses are best for nonlinear optical devices.

Biosynthesis of uniform fluorescent-stable telluride quantum dots in Escherichia coli and its detection of Fe3+ in water.

Quantum dots (QDs) containing zinc (Zn) and tellurium (Te) have low toxicity and excellent optoelectronic properties, which make them ideal fluorescent probes for use in environmental monitoring. However, their size/shape distribution synthesized by existing methods is not as good as that of other nanoparticles, thus limiting their application. Exploring whether this kind of QD can be biosynthesized and whether it can act as a nanoprobe are favorable attempts to expand the synthesis method and the application of QDs. Telluride QDs were biosynthesized in Escherichia coli cells. The nanoparticles were characterized by transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray spectroscopy (EDX), and inductively coupled plasma-atomic emission spectrometry (ICP‒AES), indicating that they were Zn3STe2 QDs. The QDs were monodispersed, spherical and fluorescently stable, with a uniform particle size of 3.05 ± 0.48 nm. The biosynthesis conditions of the QDs, including substrate concentrations and their process time, were optimized respectively. It was verified that the cysE and cysK genes were involved in the biosynthesis of telluride QDs. The biosynthesis ability of the QDs was improved by knocking out the tehB gene and overexpressing the pckA gene. Escherichia coli BW25113 cells that synthesized Zn3STe2 QDs were used as environmentally friendly fluorescent bioprobes to specifically select and quantitatively detect Fe3+ in water with a low limit of detection (2.62 µM). The fluorescent cells were also photobleach resistant and had good fluorescence stability. This study expands on the synthesis method of telluride QDs and the application of fluorescent probes.