Controlling Chelation and Esterification in Pechini Synthesis for Enhancing Chemical Looping Steam Methane Reforming using LaFeO3 Perovskite.

The properties of an oxygen carrier, such as crystalline structure, textural properties, and surface chemical species, significantly influence the redox performance in thermochemical redox applications. This study presents the synthesis of various lanthanum orthoferrite (LaFeO3) perovskites by adjusting Pechini synthesis parameters, including chelating agent ratio, calcination temperature, and solution pH. A larger surface area emerged as a dominant factor contributing to improved redox performance. The porosity of the polyester resin proves crucial in achieving a large surface area and a small particle size for the oxygen carrier. This goal could be attained by controlling the pH of the precursor solution. A low degree of chelation or precipitation may lead to uneven cation distribution, resulting in the enrichment of trace hydroxide impurities. These impurities can suppress the reducibility of particles during the looping experiment. Various investigations, using XRD, XPS, XAS, SEM, and N2 physisorption, revealed that porosity and crystallinity can be controlled by altering the synthesis parameters.

Mild Approach for the Formulation of Chestnut Flour-Enriched Snacks: Influence of Processing Parameters on the Preservation of Bioactive Compounds of Raw Materials.

Third-generation snacks were developed from a triad of flours made up of chestnut, spelt, and chickpea flour. Optimal snack formulations and processing parameters have been established to ensure acceptable workability of the raw dough while protecting the bioactive components of the raw materials. The parameters examined were mixing time, speed, and temperature. The properties of the snack were evaluated by analyzing the expansion ratio, hardness, moisture content, and phenolic and volatile compounds. The optimal mixing conditions that ensure maximum expansion were a temperature of 30 °C, a speed of 30 rpm, and a time of 6 min. The results showed that the proper percentage of water and sodium bicarbonate was 35% and 2%, respectively, and that the developed snacks had an alveolar and homogeneous structure. The proposed approach brings several advantages, including the preservation of bioactive compounds during the production process. Furthermore, the mild operating conditions prevented the development of unwanted or unpleasant compounds, as confirmed by the analysis of volatile compounds. Therefore, this study opens new perspectives in the food industry, satisfying the growing demand for functional products and healthy snacks.

Pea protein - gum Arabic gel addition as ingredient to increase protein, fiber and decrease lipid content in muffins without impair the texture and intestinal microbiota.

This study evaluated the use of a protein-polysaccharide gel (PGEL) as a muffin ingredient, and its effect on the nutritional, textural, and gut microbiome profiles. PGEL was generated by complex coacervation with Pea protein and Gum Arabic. A mixture design was performed with different flour, lipids, and PGEL proportions, where Tx9 (26 % PGEL) showed improved physicochemical characteristics. Optimization was performed using 3 variables, hardness, protein content, and in vitro protein digestibility, to generate an optimal muffin with PGEL (PGEL-Muffin). PGEL-Muffin had a positive effect in its nutritional content and texture (protein: 12.03 %, fiber: 7.90 %, lipids: 9.23 %, and hardness: 4.41 N) compared to a muffin without protein addition (Control) and a muffin with added pea protein powder (Powder-Muffin). PGEL-Muffin did not modify gut microbiome using an ex-vivo system after 4-days of administration. PGEL ingredient could be an opportunity to develop nutritionally improved products without a negative impact on textural properties.

Sprouted wheat wholemeal as a techno-functional ingredient in hard pretzels.

There has been a growing interest in incorporating sprouted wheat wholemeal (SWW) into whole grain baking, driven by its heightened nutritional content and improved nutrient bioavailability. This study aimed to assess how substituting soft wheat flour (SWF) with various levels of wheat wholemeal (unsprouted and sprouted) impacts the quality and sensory characteristics of hard pretzel sticks, which are globally enjoyed as popular snacks. The dough samples containing wholemeal did not demonstrate the same extensibility as the SWF dough sample. Additionally, substituting SWF with wholemeal increased the resistance to extension. Analysis of the Raman spectra of SWF and two other selected dough samples containing 75 % unsprouted wheat wholemeal (UWW) or SWW indicated α-helix as the dominant protein secondary structure. As the ratio of wholemeal to SWF increased in both unsprouted and sprouted wheat pretzel samples, protein and fiber content increased and starch content decreased, resulting in a decreased peak viscosity in an RVA (Rapid Visco Analyzer) test. The findings also showed no significant difference in hardness between the SWF pretzel sample and all other samples (p > 0.05), except when SWF was replaced with the highest level (75 %) of SWW, resulting in a significantly softer texture. Color analysis revealed that the introduction of wholemeal led to a decrease in the L* value, indicating a darker surface appearance in the samples, likely due to the presence of bran. Finally, sensory evaluation determined that replacing SWF with 25 % SWW resulted in the creation of a sample most similar to SWF in terms of sensory attributes. This research paves the way for future studies and advancements in the formulation and analysis of pretzel dough, creating opportunities to improve both the quality of the product and consumer satisfaction.

Quality Evaluation of Chicken Liver Pâté Affected by Algal Hydrocolloids Addition: A Textural and Rheological Approach.

Hydrocolloids are used in spreadable meat or poultry products to improve consistency, emulsion stability and water retention, resulting in products with desired functional and organoleptic properties. The scope of the work was to evaluate the addition of three divergent algal hydrocolloids (κ-carrageenan, ι-carrageenan, furcellaran) at four different concentrations (0.25, 0.50, 0.75, and 1.00% w/w) on the physicochemical, textural, rheological and organoleptic properties of model chicken liver pâté (CLP) samples. Overall, the highest hardness and viscoelastic moduli values of the CLP samples were reported when κ-carrageenan and furcellaran were utilized at a concentration of 0.75% w/w (p < 0.05). Furthermore, increasing the concentrations of the utilized hydrocolloids led to increase in the viscoelastic moduli and hardness values of CLP. Compared to the control sample, an increase in spreadability was reported in the CLP samples with the addition of hydrocolloids. Finally, the use of algal hydrocolloids proved to be an effective way to modify the techno-functional properties of CLP.

Crucial textural properties of braised pork to evaluate the oral mastication behavior and its water distribution to influence tenderness.

The complex composition of braised pork, including lean meat, pigskin, and fat, makes it difficult for sensory evaluation of its texture properties. This study investigated the correlation between sensory texture attributes and physicochemical properties to achieve an objective and comprehensive evaluation of the texture of braised pork. Sensory analysis demonstrated that the overall texture acceptability of braised pork was significantly and negatively influenced by sensory texture attributes (including sensory hardness, chewiness, and toughness), while it was positively impacted by sensory adhesiveness, softness, and juiciness. Shear force and texture profile analysis (TPA) variables, reflecting mastication behavior, were used to characterize the textural properties of braised pork. They were closely related to water distribution, with a higher proportion of immobilized water (P21), indicating a higher water holding capacity and a more tender texture. Correlation analysis between sensory texture attributes and physicochemical properties through partial least squares regression further revealed significant associations between shear force, TPA variables, and sensory texture attributes. Moreover, the proportion of immobilized water (P21) significantly and negatively affected sensory hardness and chewiness, whereas the proportion of free water (P22) significantly influenced sensory toughness. Sensory texture attributes could be well predicted by the physicochemical properties by projecting test samples onto calibration models established by known samples. Therefore, a combination of sensory and instrumental measures can reliably reflect the texture properties of braised pork. PRACTICAL APPLICATION: The combination of sensory and instrumental methods is an effective strategy to accurately and objectively evaluate the texture properties of braised pork, which overcomes the limitations caused by the complexity of the composition and texture traits of braised pork. The accurate evaluation and standardization of texture properties is an important premise for the repeatable and stable cooking of traditional braised pork. Furthermore, this research method and findings can also be applied to guide the procedural optimization of smart appliances (e.g., induction cookers) for cooking braised pork.

Effects of Sequential Induction Combining Thermal Treatment with Ultrasound or High Hydrostatic Pressure on the Physicochemical and Mechanical Properties of Pea Protein-Psyllium Hydrogels as Elderberry Extract Carriers.

Entrapping bioactive ingredients like elderberry extract in hydrogels improves their stability and functionality in food matrices. This study assessed the effect of sequential thermal treatment with ultrasound (US) or high hydrostatic pressure (HHP) and treatment duration on pea protein-psyllium hydrogels as elderberry extract carriers. Measurements included color parameters, extract entrapment efficiency, physical stability, textural properties, microrheology, FT-IR, thermal degradation (TGA), SEM images, total polyphenols content, antioxidant activity, and reducing power. The control hydrogel was obtained using only thermal induction. Both treatments impacted physical stability by affecting biopolymer aggregate structures. Thermal and US combined induction resulted in hydrogels with noticeable color changes and reduced entrapment efficiency. Conversely, thermal and HHP-combined induction, especially with extended secondary treatment (10 min), enhanced hydrogel strength, uniformity, and extract entrapment efficiency (EE = 33% for P10). FT-IR and TGA indicated no chemical structural alterations post-treatment. Sequential thermal and HHP induction preserved polyphenol content, antioxidant activity (ABTS = 5.8 mg TE/g d.m.; DPPH = 11.1 mg TE/g d.m.), and reducing power (RP = 1.08 mg TE/g d.m.) due to the dense hydrogel structure effectively enclosing the elderberry extract. Sequential thermal and HHP induction was more effective in developing pea protein-psyllium hydrogels for elderberry extract entrapment.

Evaluation of low-temperature ultrasonic marination of pork meat at various frequencies on physicochemical properties, myoglobin levels, and volatile compounds.

This study aims to evaluate the pork meat quality after ultrasonic brining at different frequencies, thereby providing a more comprehensive understanding of the effects of ultrasound marination on meat. The texture profile analysis showed that ultrasonic curing at various frequencies significantly improved the textural properties of samples, especially at 26.8 kHz, resulting in a reduction of tenderness, hardness, and chewiness values by 44%, 43%, and 44%, respectively. The cooking loss of samples marinated by ultrasound decreased from 27% without ultrasonic treatment to 22%, indicating a significant improvement in water-holding capacity, while the changes in pH had only a subtle impact on pork quality. Meanwhile, the color of pork became more rosy hue due to decreased L⁎ values and increased a⁎ values, which was mainly attributed to an elevated proportion of oxymyoglobin and reduced metmyoglobin content. Additionally, ultrasonic marination did not exert a negative impact on the oxidation of pork protein and lipids. After roasting, samples marinated by ultrasound exhibited a significantly higher abundance of volatile flavor compounds compared to static marinated meat (with an increase of 16 flavor substances) and fresh pork (with an increase of 24 flavor substances), demonstrating the efficacy of ultrasonic marination in enhancing the overall flavor and taste profile of pork. Consequently, the application of ultrasonic technology holds great potential for the "home kitchen type" rapid marination.

Functional Nanostructured Lipid Carrier-Enriched Hydrogels Tailored to Repair Damaged Epidermal Barrier.

In this study, a functional nanostructured lipid carriers (NLCs)-based hydrogel was developed to repair the damaged epidermal skin barrier. NLCs were prepared via a high-energy approach, using argan oil and beeswax as liquid and solid lipids, respectively, and were loaded with ceramides and cholesterol at a physiologically relevant ratio, acting as structural and functional compounds. Employing a series of surfactants and optimizing the preparation conditions, NLCs of 215.5 ± 0.9 nm in size and a negative zeta potential of -42.7 ± 0.9 were obtained, showing acceptable physical and microbial stability. Solid state characterization by differential scanning calorimetry and X-ray powder diffraction revealed the formation of imperfect crystal NLC-type. The optimized NLC dispersion was loaded into the gel based on sodium hyaluronate and xanthan gum. The gels obtained presented a shear thinning and thixotropic behavior, which is suitable for dermal application. Incorporating NLCs enhanced the rheological, viscoelastic, and textural properties of the gel formed while retaining the suitable spreadability required for comfortable application and patient compliance. The NLC-loaded gel presented a noticeable occlusion effect in vitro. It provided 2.8-fold higher skin hydration levels on the ex vivo porcine ear model than the NLC-free gel, showing a potential to repair the damaged epidermal barrier and nourish the skin actively.

Application of lysine as a potential alternative to sodium salt in frankfurters: With emphasis on quality profile promotion and saltiness compensation.

This study aimed to investigate the effect of lysine (Lys) on quality profile promotion and saltiness compensation in reduced­sodium salt frankfurters. The results showed that the cooking loss of reduced­sodium salt frankfurters decreased from 5.63 to 3.45% when the Lys level increased from 0.1 to 0.7%, as well as enhanced water contents and saltiness in a Lys dose-dependent manner. Moreover, the corresponding peak area percentage (A21) of reduced­sodium salt frankfurters remarkably increased from 79.63% to 81.48% with the increased level of Lys. However, a higher level of Lys (≥ 0.5%) obviously reduced the textural properties of reduced­sodium salt frankfurters, which was clearly verified by looser and rougher microstructures. Furthermore, hydrogen bonds were found to be the dominant molecular force in Lys-added reduced­sodium salt frankfurters. Meanwhile, 0.3% Lys was found to exhibit the optimal sodium salt-replacing effect due to the highest degree of quality profile promotion and saltiness compensation. Additionally, directional triangle sensory evaluation further confirmed that the reduced­sodium salt frankfurters treated with 0.3% Lys was perceived to be similar to control frankfurters, resulting a 50% salt-reduction effect. Thus, our results suggested that Lys could be applied as an efficient sodium salt alternative in reduced­sodium salt frankfurters.

Investigation into the fabrication of plant-based simulant connective tissue utilizing algae polysaccharide-derived hydrogel.

Connective tissue is an important component of meat products that provides support to animal muscles. Hydrogels are considered a promising alternative to connective tissues and simulate actual products by adjusting the gel texture and mouthfeel. This study used soybean protein isolate (SPI), corn starch (CS), konjac glucomannan (KGM), and seaweed powder (SP) as raw materials to examine the effect of different added SP and KGM concentrations on the gel texture. The G' of the gel increased five-fold when the SP and KGM concentration was increased from 1 % to 3 %. The results of mechanical property tests showed that with the addition of SP, the gel hardness increased from 316.00 g to 1827.23 g and the tensile strength increased from 0.027 MPa to 0.089 MPa. Sensory evaluation showed that the samples with 2 % SP and KGM presented the highest overall acceptability score and the most significant similarity to real connective tissue. The connective tissue simulants exhibited excellent water-holding capacity (>90 %), significantly increasing their juiciness. SEM indicated that 2 % KGM addition improved gel network structure stability. The results demonstrate the potential of seaweed polysaccharide-derived hydrogels as connective tissue mimics. This provides a new strategy for the preparation of high mechanical strength hydrogels and lays the foundation for structural diversification of plant-based meat.

Potassium-based emulsifying salts in processed cheese: A rheological, textural, tribological, and thermal approach.

The aim of the study was to investigate the effect of potassium-based emulsifying salts (ES; 2% wt/wt concentration) with different phosphate chain lengths (dipotassium hydrogenphosphate [K2HPO4; DKP], tetrapotassium diphosphate [K4P2O7; KTPP], pentapotassium triphosphate [K5P3O10; TKPP]) on the physicochemical, viscoelastic, textural, tribological, thermal, and sensory properties of processed cheese (PC; 40% wt/wt DM, 50% wt/wt fat in DM) during a 60d storage period (6°C ± 2°C). On the whole, the hardness of all PC samples increased with the increasing chain length of ES (DKP < TKPP < KTPP) and the prolonging storage period. Moreover, the hardness results were in accordance with those of the rheological analysis. All PC samples exhibited a more elastic character (G' > G″; tan δ < 1). The type of potassium-based ES affected the binding of water into the structure of the PC. Furthermore, the study confirmed that the manufactured PC received optimal sensory scores, without any excessive bitterness. It could be concluded that the type of applied ES and storage length affected the functional properties of PC. Finally, the information provided in this study could serve as a tool for the dairy industry to help appropriately select potassium-based ES for PC manufacture with desired properties.

Exploring Texture and Biomechanics of Food Oral Processing in Fork-Mashable Dishes for Patients with Mastication or Swallowing Impairments.

Texture-modified diets (TMDs) are a primary compensatory treatment for hospitalized older patients with swallowing and mastication disorders. Nevertheless, the lack of a protocol for evaluating their objective textural properties hampers their industrialization and optimal patient care. OBJECTIVES: This study aimed (a) to evaluate the textural properties (maximum force, cohesiveness, and adhesiveness) and biomechanics of food oral processing (mastication cycles, time, and frequency) of ten fork-mashable dishes (Texture E BDA/IDDSI level 6), (b) to explore the impact of oral processing on texture, and (c) to measure the properties of the ready-to-swallow bolus (RSB) in healthy adults. METHODS: The textural properties (maximum force, cohesiveness, and adhesiveness) of ten dishes were analyzed with a texture analyzer before and after oral processing (RSB) in five healthy adults (30 ± 3.9, 3 women). Surface electromyography was used to measure mastication cycles, time, and frequency. RESULTS: The pre-mastication Texture Profile Analysis (TPA)-averaged values of maximum force ranged from 0.65 to 2.73 N, cohesiveness was 0.49-0.87, and adhesiveness was 0.01-0.95 N·s. Masticatory Cycles (46.87-19.13 MC) and time (36.73-15.80 S) from whole samples to RSB greatly and significantly differed among dishes, although frequency did not (1.68-1.11 MC/T). Post-mastication RSB TPA-averaged values of maximum force ranged from 0.70 to 2.24 N; cohesiveness, 0.49-0.73; and adhesiveness, 0.01-1.14 N·s. CONCLUSIONS: Despite all dishes being classified by the same qualitative descriptor (BDA level E/IDDSI level 6), there was a large and significant variation in their textural properties (maximum force, cohesiveness, and adhesiveness) when measured in SI units. In addition, in healthy adults, the masticatory cycles and time to achieve RSB greatly differed, whereas masticatory frequency remained quite constant.

Binary Pea Protein-Psyllium Hydrogel: Insights into the Influence of pH and Ionic Strength on the Physical Stability and Mechanical Characteristics.

Food hydrogels, used as delivery systems for bioactive compounds, can be formulated with various food-grade biopolymers. Their industrial utility is largely determined by their physicochemical properties. However, comprehensive data on the properties of pea protein-psyllium binary hydrogels under different pH and ionic strength conditions are limited. The aim of this research was to evaluate the impact of pH (adjusted to 7, 4.5, and 3) and ionic strength (modified by NaCl addition to 0.15 and 0.3 M) on the physical stability, color, texture, microrheological, and viscoelastic properties of these hydrogels. Color differences were most noticeable at lower pH levels. Inducing hydrogels at pH 7 (with or without NaCl) and pH 4.5 and 3 (without NaCl) resulted in complete gel structures with low stability, low elastic and storage moduli, and low complex viscosity, making them easily spreadable. Lower pH inductions (4.5 and 3) in the absence of NaCl resulted in hydrogels with shorter linear viscoelastic regions. Hydrogels induced at pH 4.5 and 3 with NaCl had high structural stability, high G' and G" moduli, complex viscosity, and high spreadability. Among the tested induction conditions, pH 3 with 0.3 M NaCl allowed for obtaining a hydrogel with the highest elastic and storage moduli values. Adjusting pH and ionic strength during hydrogel induction allows for modifying and tailoring their properties for specific industrial applications.

An oral gel suitable for swallowing: The effect of micronization on the gel properties and microstructure of κ-carrageenan.

κ-Carrageenan (κ-Car) is an important material for preparing food gels and hydrogels. However, κ-Car gel has issues with high hardness and low water-holding capacity. Modification strategy of micronization is proposed for the first time to explore its influence on texture properties and gelling process of κ-Car gel, and to investigate the feasibility of κ-Car as a food matrix with low strength. κ-Car undergoing 60 min of micronization, the d(0.9) decreased by 79.33 %, SBET and Vtotal increased by 89.23 % and 95.27 %. The swelling rate and degree of gelling process increased significantly, and the microstructure changed from loose large pores to dense small pores resembling a "honeycomb". Importantly, the hardness of gel-60, Milk-60 and PNS-60 decreased by 72.52 %, 49.25 % and 81.37 %. In addition, WHC of gel-60, Milk-60 and PNS-60 was improved. IDDSI tests showed that κ-Car gels, milk gels and PNS gels can be categorized as level 6 (soft and bite-sized), except for PNS-60, which belongs to level 5 (crumbly and moist). Furthermore, the texture and bitter masking effect of milk gels and PNS gels were improved. In conclusion, this study demonstrated that micronization can be a novel approach to improve the gel properties of κ-Car, laying the groundwork for developing dysphagia foods.

Quality characteristics and cooking-induced changes on phenolic compounds of dried green tea noodles.

Incorporating green tea powder (GTP) into wheat flour-based noodles can significantly improve nutritional value. So, this study investigated the effects of GTP (0%, 0.5%, 1%, 1.5%, and 2.0%) on the quality properties of dried green tea noodles (DGTN) and cooking-induced changes to phenolic compounds. Mixolab analysis of wheat flour with GTP showed more water absorption of dough, and the developed dough had a firmer structure. GTP markedly increased the toughness of the noodle sheet. DGTN fortified with GTP showed more stable textural properties during cooking and storage, representing higher hardness and tensile strength. The viscosity and thermal properties of DGTN showed that GTP affected the gelatinization and retrogradation behavior of starch, which were closely related to the textural properties. Overall, DGTN prepared with 1.5% GTP showed better quality properties. However, ultra-performance liquid chromatography-time (UPLC/Q-TOF-mass spectrometry [MS]/MS) analysis showed that cooking by boiling significantly decreased phenolic content in 1.5% DGTN; further analysis revealed that the thermal degradation is a key factor in the loss of polyphenols. Therefore, further studies are necessary to focus on the mechanism of cooking-induced polyphenol loss, which is of great significance for improving the nutritional value of cooked DGTN.

Effects of different amounts of okara on texture, digestive properties, and microstructure of noodles.

As a byproduct of manufacturing soybeans, okara is high in dietary fiber, protein, and fats, and it contains all of the essential amino acids. Wheat, the primary ingredient in noodles, will lose nutrients during manufacturing, creating an imbalance in nutrients. This experiment is for the purpose of studying the effects of okara on quality, antioxidant properties, amino acid content, resistant starch (RS) content, and microstructure of noodles. The results indicate that the addition of 9% okara noodles increased hardness and adhesiveness by 107.19% and 132.14%, respectively, and improved ABTS free radical scavenging activity by 60.78%. The addition of 12% okara noodles increased the DPPH free radical scavenging ability by 23.66%, reduced the rapidly digestible starch (RDS) content of the noodles to 21.21%, and the resistant starch content increased to 44.85% (p < .05). Therefore, to address the issue of nutritional imbalance in wheat noodles without compromising the quality of the noodles, it is recommended to add 9% or 12% okara for the preparation of nutritionally fortified noodles.

3D Printing of Materials and Printing Parameters with Animal Resources: A Review.

3D printing technology enables the production of creative and personalized food products that meet consumer needs, such as an attractive visual appearance, fortification of specific nutrients, and modified textures. To popularize and diversify 3D-printed foods, an evaluation of the printing feasibility of various food pastes, including materials that cannot be printed natively, is necessary. Most animal resources, such as meat, milk, and eggs, are not inherently printable; therefore, the rheological properties governing printability should be improved through pre-/post-processing or adding appropriate additives. This review provides the latest progress in extrusion-based 3D printing of animal resource-based inks. In addition, this review discusses the effects of ink composition, printing conditions, and post-processing on the printing performance and characteristics of printed constructs. Further research is required to enhance the sensory quality and nutritional and textural properties of animal resource-based printed foods.

Assessing meat quality and textural properties of broiler chickens: the impact of voltage and frequency in reversible electrical water-bath stunning.

The implementation of the head-only electrical stunning procedure in poultry processing has been aimed at enhancing eating, ethical, and religious quality. However, inconsistencies in voltage and frequency standardization, along with variations in previous research outcomes, have led to numerous cases of both under-stunned and over-stunned birds. Thus, this study aimed to comprehensively evaluate the effects of varying voltages and frequencies during electrical water bath stunning on carcass quality, meat attributes, and textural properties in broiler chickens. A cohort of 240 healthy female broilers (Cobb 500, 42-days-old, 2 kg ± 0.1 kg) was meticulously selected from a commercial farm. The birds underwent exposure to different stunning voltages (2.5, 10.5, 30, and 40 V) and frequencies (50 and 300 Hz). Subsequent analyses were conducted on meat samples to assess physicochemical properties, carcass quality, and textural attributes. The findings revealed a higher incidence of petechial hemorrhage (P < 0.05) in birds stunned at 10.5 V compared to other voltage. Notably, no broken bones were recorded in birds subjected to high voltages (30 and 40 V). Low frequency (50 Hz) significantly increased the occurrence of petechial hemorrhage and simultaneously resulted in pectoralis major muscle with decreased redness (a*). Birds subjected to the 10.5 V stunning treatment exhibited a lower cooking loss percentage. Significant interactions between voltage and ageing (V × A) were observed. Birds stunned at 30 V and aged for 7 d displayed highest drip loss compared to a one-day ageing period across different voltage levels. This interaction also impacted pH values, with birds subjected to 10.5 V showing significantly lower (P < 0.05) pH at d 7 of ageing. The meat hardness was influenced by the V × A interaction, wherein birds stunned at 10.5 V exhibited lower hardness after one day of ageing compared to other voltage levels. Red wing tips, lightness (L*), adhesiveness, and resilience were also significantly impacted (P < 0.05) by the interaction between frequency and voltage. A notable 3-way interaction was observed for gumminess and chewiness (F × V × A), where the 2-way interaction between frequency and voltage (F × V) affected both parameters differently at various ageing periods. Additionally, there was a significant interaction (P < 0.05) between frequency and voltage influencing shear strength and yellowness.

Impact of antioxidant potential of rohu (Labeo rohita) swim bladder gelatin hydrolysate on oxidative stability, textural and sensory properties of fish sausage enriched with polyunsaturated fatty acids.

The impact of rohu swim bladder gelatin hydrolysate (SBGH) at different levels on textural, sensory, oxidative, and microbial properties of polyunsaturated fatty acids enriched rohu fish cooked sausages (PUFA-RFS) were investigated in the current study. SBGH addition enhanced the lightness values of PUFA-RFS compared to both control sausages (without SBGH and with butylated hydroxyanisole (BHA) (P > 0.05). PUFA-RFS added with 3% SBGH exhibited higher hardness, cohesiveness, and gumminess throughout the storage duration at both 4 °C and -20 °C temperatures when compared to other sausages counterparts. PUFA-RFS added with SBGH displayed lower PV, TBARS, and total microbial counts than the control sausages. Furthermore, PV, TBARS, and total microbial count values of sausage decreased with an increase in SBGH level, indicating retardation in lipid oxidation and microbial growth by SBGH in a dose-depended manner. Nevertheless, sausage added with 3% SBGH had higher overall acceptability than other sausage counterparts. Therefore, SBGH could retard lipid oxidation and improves textural properties of PUFA-enriched fish sausage.