Compounds derived from 5-fluoropyridine and benzo[b]thiophene: killing Mycobacterium tuberculosis and reducing its virulence.

The rise of drug-resistant Mycobacterium tuberculosis (Mtb) has extended the duration of tuberculosis (TB) treatment and reduced the likelihood of cure. One strategy to combat this issue is the development of inhibitors targeting the virulence factors of bacterial pathogens. Mtb' catalase (KatG) is crucial for its detoxification mechanisms and also serves as a significant virulence factor for the bacterium. In this study, twelve derivatives synthesized from 5-fluoropyridine and benzo[b]thiophene demonstrated antimycobacterial efficacy with minimum inhibitory concentrations (MICs) varying between 0.5 and 32 µg/mL. Compound 2, 2-(benzo[b]thiophene-2-ylmethylene) hydrazine-1-carbothioamide, emerged as the most potent candidate. It effectively inhibited Mtb KatG. Molecular docking revealed that compound 2 binds  to the active site of Mtb-KatG with  docking score of 114. The rabbit skin tuberculosis model was employed to assess the virulence of Mtb. Animal study results indicated that the granulomas induced by Mtb after treatment with compound 2 were reduced in size, exhibited a lower bacterial load, and the bacteria were no longer aggregated, in contrast to those caused by untreated Mtb. Hence, compound 2 can be regarded as a molecule capable of neutralizing the virulence factors of Mtb. This research offers insights into the design of anti-Mtb molecules with novel mechanisms of action.

Formation and Reactions of Brønsted and Lewis Acid Adducts with Electron-Rich Heteroaromatic Compounds.

Electron-rich heteroaromatics, such as furan, thiophene and pyrrole, as well as their benzo-condensed derivatives, are of great interest as components of natural products and as starting substances for various products including high-tech materials. Although their reactions with Brønsted and Lewis acids play important roles, in particular as the primary step of various transformations, they are often disregarded and mechanistically not understood. The present publication gives a first overview about this chemistry focusing on the parent compounds. It comprises reactions with strong Brønsted acids forming adducts that can undergo intramolecular proton and/or substituent transfer reactions, ring openings or ring transformations into other heterocycles, depending on their structure. Interactions with weak Brønsted acids usually initiate oligomerizations/polymerizations. A similar behaviour is observed in reactions of these heteroaromatics with Lewis acids. Special effects are achieved when the Lewis acids are activated through primary protonation. Deuterated Brønsted acids allow straight forward deuteration of electron-rich heteroaromatics. Mercury salts as extremely weak Lewis acids cause direct metalation in a straight forward way replacing ring H-atoms yielding organomercury heterocycles. This review will provide comprehensive information about the chemistry of adducts of such heterocycles with Brønsted and Lewis acids enabling chemists to understand the mechanisms and the potential of this field and to apply the findings in future syntheses.

Cholinesterase Inhibition and Antioxidative Capacity of New Heteroaromatic Resveratrol Analogs: Synthesis and Physico-Chemical Properties.

The targeted compounds in this research, resveratrol analogs 1-14, were synthesized as mixtures of isomers by the Wittig reaction using heterocyclic triphenylphosphonium salts and various benzaldehydes. The planned compounds were those possessing the trans-configuration as the biologically active trans-resveratrol. The pure isomers were obtained by repeated column chromatography in various isolated yields depending on the heteroaromatic ring. It was found that butyrylcholinesterase (BChE) was more sensitive to the heteroaromatic resveratrol analogs than acetylcholinesterase (AChE), except for 6, the methylated thiophene derivative with chlorine, which showed equal inhibition toward both enzymes. Compounds 5 and 8 achieved the highest BChE inhibition with IC50 values of 22.9 and 24.8 µM, respectively. The same as with AChE and BChE, methylated thiophene subunits of resveratrol analogs showed better enzyme inhibition than unmethylated ones. Two antioxidant spectrophotometric methods, DPPH and CUPRAC, were applied to determine the antioxidant potential of new heteroaromatic resveratrol analogs. The molecular docking of these compounds was conducted to visualize the ligand-active site complexes' structure and identify the non-covalent interactions responsible for the complex's stability, which influence the inhibitory potential. As ADME properties are crucial in developing drug product formulations, they have also been addressed in this work. The potential genotoxicity is evaluated by in silico studies for all compounds synthesized.

Synthesis and crystal structures of two racemic 2-heteroaryl-3-phenyl-2,3-di-hydro-4H-pyrido[3,2-e][1,3]thia-zin-4-ones.

3-Phenyl-2-(thio-phen-3-yl)-2,3-di-hydro-4H-pyrido[3,2-e][1,3]thia-zin-4-one (C17H12N2OS2, 1) and 2-(1H-indol-3-yl)-3-phenyl-2,3-di-hydro-4H-pyrido[3,2-e][1,3]thia-zin-4-one 0.438-hydrate (C21H15N3OS·0.438H2O, 2) crystallize in space groups P21/n and C2/c, respectively. The asymmetric unit in each case is comprised of two parent mol-ecules, albeit of mixed chirality in the case of 1 and of similar chirality in 2 with the enanti-omers occupying the neighboring asymmetric units. Structure 2 also has water mol-ecules (partial occupancies) that form continuous channels along the b -axis direction. The thia-zine rings in both structures exhibit an envelope conformation. Inter-molecular inter-actions in 1 are defined only by C-H⋯O and C-H⋯N hydrogen bonds between crystallographically independent mol-ecules. In 2, hydrogen bonds of the type N-H⋯O between independent mol-ecules and C-H⋯N(π) type, and π-π stacking inter-actions between the pyridine rings of symmetry-related mol-ecules are observed.

Mechanism insight into the conversion between COS and thiophene during CO2 gasification of carbon-based fuels.

Thiophene is the organic sulfur with good thermal stability in carbon-based fuel, clarifying the conversion mechanism between thiophene and COS is beneficial for achieving in-situ sulfur fixation during CO2 gasification of carbon-based fuels, but the mechanism has rarely been reported. Therefore, calculations based on density functional theory were performed and 16 reaction paths were proposed in this research, clarifying the decomposition mechanism of thiophene and re-fixation mechanism of COS. The attachment of CO2 will lead to the destruction of the thiophene ring and the generation of COS, and CO2 adsorption is the rate-determined step, while the carbon atom that adjacent sulfur atom is the reaction active site. However, the energy barriers of CO2 addition reactions are lower than those of CO2 adsorption reactions, and the energy barrier of reactions occurring on the aliphatics are lower than that occurring on the aromatics. The combination of CO2 and thiophene will thermodynamically lead to the generation of COS and CO. Moreover, gaseous sulfur generated from thiophene decomposition will be converted mutually, while H2S will not be converted into COS. Furthermore, COS will be captured by char, forming solid organic sulfur. The re-fixation of COS will occur on aliphatic chains from the decomposition of aromatics.

Helix-to-Disc Conversion of Thia[6]helicenes into Coronenes Facilitated by Sulfur Oxidation and Fluorination.

Helicenes, with their unique helical structures, have long captured the interest of synthetic chemists, not only as end products, but also as versatile platforms for further chemical transformations. However, transforming [6]helicene into planar coronene typically requires harsh conditions and poses significant challenges. Herein, we demonstrate that replacing the terminal benzene ring of [6]helicene with a thiophene ring enables its photochemical transformation into coronene. Sulfur oxidation of the thiophene ring enables the corresponding thermal transformation, and the terminal tetrafluorination of the opposite benzene ring further accelerates this process, yielding 1,2-difluorocoronene, as confirmed by X-ray crystallography. The transformation begins with an intramolecular Diels-Alder reaction, whose activation energy is significantly lowered by these structural changes. Our findings underscore the utility of strategic modifications such as sulfur oxidation and fluorination in promoting this "helix-to-disc" conversion and opening new avenues for synthesizing functional polycyclic aromatics.

Triazine and Fused Thiophene-Based Donor-Acceptor Type Semiconducting Conjugated Polymer for Enhanced Visible-Light-Induced H2 Production.

Conjugated polymers have attracted significant attention in the field of photocatalysis due to their exceptional properties, including versatile optimization, cost-effectiveness, and structure stability. Herein, two conjugated porous polymers, PhIN-CPP and ThIN-CPP, based on triazines, were meticulously designed and successfully synthesized using benzene and thiophene as building blocks. Based on UV diffuse reflection spectra, the photonic band gaps of PhIN-CPP and ThIN-CPP were calculated as 2.05 eV and 1.79 eV. The PhIN-CPP exhibited a high hydrogen evolution rate (HER) of 5359.92 µmol·g-1·h-1, which is 10 times higher than that of Thin-CPP (538.49 µmol·g-1·h-1). The remarkable disparity in the photocatalytic performance can be primarily ascribed to alterations in the band structure of the polymers, which includes its more stable benzene units, fluffier structure, larger specific surface area, most pronounced absorption occurring in the visible region and highly extended conjugation with a high density of electrons. The ΔEST values for PhIN-CPP and ThIN-CPP were calculated as 0.79 eV and 0.80 eV, respectively, based on DFT and TD-DFT calculations, which revealed that the incorporation of triazine units in the as-prepared CMPs could enhance the charge transfer via S1 ↔ T1 and was beneficial to the photocatalytic decomposition of H2O. This study presents a novel concept for developing a hybrid system for preparation of H2 by photocatalysis with effectiveness, sustainability, and economy.

Crystal structure and Hirshfeld surface analysis of dimethyl 2-oxo-4-(pyridin-2-yl)-6-(thio-phen-2-yl)cyclo-hex-3-ene-1,3-di-carboxyl-ate.

In the title compound, C19H17NO5S, the cyclo-hexene ring adopts nearly an envelope conformation. In the crystal, mol-ecules are linked by C-H⋯O hydrogen bonds, forming a three-dimensional network. In addition, C-H⋯π inter-actions connect the mol-ecules by forming layers parallel to the (010) plane. According to the Hirshfeld surface analysis, H⋯H (36.9%), O⋯H/H⋯O (31.0%), C⋯H/H⋯C (18.9%) and S⋯H/H⋯S (7.9%) inter-actions are the most significant contributors to the crystal packing.

Crystal structure and Hirshfeld surface analysis of (Z)-4-oxo-4-{phen-yl[(thio-phen-2-yl)meth-yl]amino}-but-2-enoic acid.

In the title compound, C15H13NO3S, the mol-ecular conformation is stable with the intra-molecular O-H⋯O hydrogen bond forming a S(7) ring motif. In the crystal, mol-ecules are connected by C-H⋯O hydrogen bonds, forming C(8) chains running along the a-axis direction. Cohesion of the packing is provided by weak van der Waals inter-actions between the chains. A Hirshfeld surface analysis was undertaken to investigate and qu-antify the inter-molecular inter-actions. The thio-phene ring is disordered in a 0.9466 (17):0.0534 (17) ratio over two positions rotated by 180°.

What Should be Considered While Designing Hole-Transporting Material for Perovskite Solar Cells? A Special Attention to Thiophene-Based Hole-Transporting Materials.

The molecular design and conformations of hole-transporting materials (HTM) have unravelled a strategy to enhance the performance of environmentally sustainable perovskite solar cells (PSC). Several attempts have been made and several are underway for improving the efficiency of PSCs by designing an efficient HTM, which is crucial to preventing corrosion, facilitating effective hole transportation, and preventing charge recombination. There is a need for a potential alternative to the current market-dominating HTM due to its high cost of production, dopant requirements, moisture sensitivity, and low stability. Among several proposed HTMs, molecules derived from thiophene exhibit unique behaviour, such as the interaction with under-coordinated Pb2+, thereby facilitating the passivation of surface defects in the perovskite layer. In addition, coupling a suitable side chain imparts a hydrophobic character, eventually leading to the development of a moisture-sensitive and highly stable PSC. Furthermore, thiophene-backboned polymers with ionic pendants have been employed as an interfacial layer between PSC layers, with the backbone facilitating efficient charge transfer. This perspective article comprehensively presents the design strategy, characterization, and function of HTMs associated with thiophene-derived molecules. Hence, it is observed that thiophene-formulated HTMs have an enhanced passivation effect, good performance in an open-circuit environment, longevity, humidity resistance, thermostability, good hole extraction, and mobility in a dopant-free condition. For a better understanding, the article provides a comparative description of the activity and function of thiophene-based small molecules and polymers and their effect on device performance.

Exploration of morpholine-thiophene hybrid thiosemicarbazones for the treatment of ureolytic bacterial infections via targeting urease enzyme: Synthesis, biochemical screening and computational analysis.

An important component of the pathogenicity of potentially pathogenic bacteria in humans is the urease enzyme. In order to avoid the detrimental impact of ureolytic bacterial infections, the inhibition of urease enzyme appears to be an appealing approach. Therefore, in the current study, morpholine-thiophene hybrid thiosemicarbazone derivatives (5a-i) were designed, synthesized and characterized through FTIR, 1H NMR, 13C NMR spectroscopy and mass spectrometry. A range of substituents including electron-rich, electron-deficient and inductively electron-withdrawing groups on the thiophene ring was successfully tolerated. The synthesized derivatives were evaluated in vitro for their potential to inhibit urease enzyme using the indophenol method. The majority of compounds were noticeably more potent than the conventional inhibitor, thiourea. The lead inhibitor, 2-(1-(5-chlorothiophen-2-yl)ethylidene)-N-(2-morpholinoethyl)hydrazinecarbothioamide (5g) inhibited the urease in an uncompetitive manner with an IC50 value of 3.80 ± 1.9 µM. The findings of the docking studies demonstrated that compound 5g has a strong affinity for the urease active site. Significant docking scores and efficient binding free energies were displayed by the lead inhibitor. Finally, the ADME properties of lead inhibitor (5g) suggested the druglikeness behavior with zero violation.

Wide Bandgap Polymer Donors Based on Succinimide-Substituted Thiophene for Nonfullerene Organic Solar Cells.

The advent of nonfullerene acceptors (NFAs) has greatly improved the photovoltaic performance of organic solar cells (OSCs). However, to compete with other solar cell technologies, there is a pressing need for accelerated research and development of improved NFAs as well as their compatible wide bandgap polymer donors. In this study, a novel electron-withdrawing building block, succinimide-substituted thiophene (TS), is utilized for the first time to synthesize three wide bandgap polymer donors: PBDT-TS-C5, PBDT-TSBT-C12, and PBDTF-TSBT-C16. These polymers exhibit complementary bandgaps for efficient sunlight harvesting and suitable frontier energy levels for exciton dissociation when paired with the extensively studied NFA, Y6. Among these donors, PBDTF-TSBT-C16 demonstrates the highest hole mobility and a relatively low highest occupied molecular orbital (HOMO) energy level, attributed to the incorporation of thiophene spacers and electron-withdrawing fluorine substituents. OSC devices based on the blend of PBDTF-TSBT-C16:Y6 achieve the highest power conversion efficiency of 13.21%, with a short circuit current density (Jsc) of 26.83 mA cm-2, an open circuit voltage (Voc) of 0.80 V, and a fill factor of 0.62. Notably, the Voc × Jsc product reaches 21.46 mW cm-2, demonstrating the potential of TS as an electron acceptor building block for the development of high-performance wide bandgap polymer donors in OSCs.

Bithiophene and coumestan derivatives from Eclipta prostrata (L.) L. and their hepatoprotective activity.

One new bithiophene derivative, 5-(but-3-en-1-yn-1-yl)-5'-(methoxymethyl)-2,2'-bithiophene (1), along with twelve known compounds, senecioester (2), tiglinsaureester (3), 5-acetoxymethyl-2'-(but-3-en-1-yn-1-yl)-2,5'-bithiophene (4), 5-(4-isovaleroyloxybut-1-ynyl)-2,2'-bithiophene (5), 5-hydroxymethyl-(2,5':2',5'')-terthienyl tiglate (6), 5-hydroxymethyl-(2,5':2',5'')-terthienyl agelate (7), 5- hydroxymethyl-2,5':2',5''-terthiophene dimethylacrylate (8), 5-methoxymethyl-2,2':5',2''-terthiophene (9), α-terthiophene (10), 1,3,8,9-tetrahydroxycoumestan 3-sulfate (11), demethylwedelolactone (12), and wedelolactone (13) were isolated from the methanol extract of aerial parts of Eclipta prostrata (L.) L. All isolated compounds were evaluated for the protective ability on the HepG2 cells. At the concentration of 100 µM, compounds 11-13 showed the highest hepatoprotective effects, with HepG2 cell viability ranging from 38.68% to 48.54%. Bithiophenes showed higher hepatoprotective cell viability than terthiophenes.

A highly sensitive ratiometric fluorescence probe for sensing and imaging sulfite in food samples and living cells.

In this work, a ratiometric and chromogenic fluorescent probe 1 was synthesized for the detection of SO32-. The probe 1 at PBS (10 mM, pH = 7.4) presented a marked emission band at 661 nm. Upon addition of SO32- ions, a highly emissive adduct with a marked fluorescence at 471 nm were obtained through a Michael addition. The probe 1 displayed a noticeable fluorescence ratiometric response with a large shift (190 nm) in emission wavelength. The probe can quantitatively detect SO32- with high specificity, fast response (within 130 s) as well as low detection limit (13 nM), and a large Stokes shift (139 nm). Fluorescence imaging of HeLa cells indicated that 1 could be used for monitoring the intrinsically generated intracellular SO32- in living cells by ratiometric fluorescence imaging. Furthermore, 1 could be application in real water and sugar samples with high sensitivity and good recoveries.

Dual Optoelectronic Organic Field-Effect Device: Combination of Electroluminescence and Photosensitivity.

Merging the functionality of an organic field-effect transistor (OFET) with either a light emission or a photoelectric effect can increase the efficiency of displays or photosensing devices. In this work, we show that an organic semiconductor enables a multifunctional OFET combining electroluminescence (EL) and a photoelectric effect. Specifically, our computational and experimental investigations of a six-ring thiophene-phenylene co-oligomer (TPCO) revealed that this material is promising for OFETs, light-emitting, and photoelectric devices because of the large oscillator strength of the lowest-energy singlet transition, efficient luminescence, pronounced delocalization of the excited state, and balanced charge transport. The fabricated OFETs showed a photoelectric response for wavelengths shorter than 530 nm and simultaneously EL in the transistor channel, with a maximum at ~570 nm. The devices demonstrated an EL external quantum efficiency (EQE) of ~1.4% and a photoelectric responsivity of ~0.7 A W-1, which are among the best values reported for state-of-the-art organic light-emitting transistors and phototransistors, respectively. We anticipate that our results will stimulate the design of efficient materials for multifunctional organic optoelectronic devices and expand the potential applications of organic (opto)electronics.

Elevating Thermoelectric Performance by Compositing Dibromo-Substituted Thienoacene with SWCNTs.

Composites of organic small molecules (OSMs) and single-walled carbon nanotubes (SWCNTs) have drawn great attention as flexible thermoelectric (TE) materials in recent years. Here, we synthesized thieno[2',3':4,5]thieno[3,2-b]thieno[2,3-d]thiophene (TTA) and 2,6-dibromothieno[2',3':4,5]thieno[3,2-b]thieno[2,3-d]thiophene (TTA-2Br) and compounded them with SWCNTs, obtaining thermoelectric TTA/SWCNT and TTA-2Br/SWCNT composites. The introduction of the electron-withdrawing Br group was found to decrease the highest molecular orbital energy level and bandgap (Eg) of TTA-2Br. As a result, the Seebeck coefficient (S) and power factor (PF) of the OSM/SWCNT composite films were significantly improved. Moreover, suitable energy barrier between TTA-2Br and SWCNTs facilitates the energy filtering effect, which further enhances thermoelectric properties of the 40 wt % TTA-2Br/SWCNT composite film with optimum thermoelectric properties (PF = 242.59 ± 9.42 µW m-1 K-2 at room temperature), good thermal stability, and mechanical flexibility. In addition, the thermoelectric generator (TEG) prepared using 40 wt % TTA-2Br/SWCNT composite films and n-type SWCNT films can generate an output power of 102.8 ± 7.4 nW at a temperature difference of 20 °C. This work provides new insights into the preparation of OSM/SWCNT composites with significantly enhanced thermoelectric properties.

Pharmacophore-based, rationale design, and efficient synthesis of novel tetrahydrobenzo[b]thiophene candidates as potential dual Topo I/II inhibitors and DNA intercalators.

A series of tetrahydrobenzo[b]thiophene derivatives was designed and synthesized as dual topoisomerase (Topo) I/II inhibitors implicating potential DNA intercalation. Ethyl-2-amino-3-cyano-4,5,6,7-tetrahydrobenzo[b]thiophene-4-carboxylate (1) was prepared by modification of the Gewald reaction procedure using a Fe2O3 nanocatalyst and then it was used as a building block for the synthesis of tetrahydrobenzo[b]thiophene candidates (2-14). Interestingly, compound 14 showed the best cytotoxic potential against hepatocellular, colorectal, and breast cancer cell lines (IC50 = 7.79, 8.10, and 3.53 µM), respectively, surpassing doxorubicin at breast cancer (IC50 = 4.17 µM). Meanwhile, the Topo I and II inhibition assay displayed that compound 3 could exhibit the best inhibitory potential among the investigated candidates (IC50 = 25.26 and 10.01 nM), respectively, in comparison to camptothecin (IC50 = 28.34 nM) and doxorubicin (IC50 = 11.01 nM), as reference standards. In addition, the DNA intercalation assay showed that compound 14 could display the best binding affinity with an IC50 value of 77.82 µM in comparison to doxorubicin (IC50 = 58.03 µM). Furthermore, cell cycle and apoptosis analyses described that compound 3 prompts the G1 phase arrest in michigan cancer foundation-7 cancer cells and increases the apoptosis ratio by 29.31% with respect to untreated cells (2.25%). Additionally, the conducted molecular docking assured the promising binding of the investigated members toward Topo I and II with potential DNA intercalation. Accordingly, the synthesized compounds could be treated as promising anticancer candidates for future optimization.

A first principles based prediction of electronic and nonlinear optical properties towards cyclopenta thiophene chromophores with benzothiophene acceptor moieties.

In the current work, organic cyclopenta-thiophene (CPT) based derivatives (FICR and FICD1-FICD5) were designed by the modulation of end-capped acceptor group of the reference molecule i.e., FICR, to explore their nonlinear optical (NLO) response. The effect of terminal acceptor and donor groups in the tailored compounds was explored by using DFT based quantum calculations. The UV-Vis analysis, frontier molecular orbitals (FMOs), transition density matrix (TDM), natural bond orbitals (NBOs), density of states (DOS), nonlinear optical (NLO) analyses were performed at M06/6-311G(d,p) functional. The LUMO-HOMO band gaps of FICD1-FICD5 were found to be smaller (1.75-1.92 eV) comparative to FICR (1.98 eV). Moreover, the global reactivity parameters (GRPs) were correlated with the results of other analyses. FICD2 and FICD5 with lowest band gap 1.73 and 1.75 eV showed less hardness (0.86 and 0.87 eV, respectively), high softness (0.58 and 0.57 eV-1), and larger absorption spectrum (815 and 813 nm) in gaseous phase and (889 and 880 nm) in solvent phase among all entitled compounds. All the designed chromophores (FICD1-FICD5) demonstrated a significant NLO response as compared to FICR. Particularly, FICD2 and FICD5 exhibited the highest average linear polarizability (<α>) [2.86 × 10-22 and 2.88 × 10-22 esu], first hyperpolarizability (ßtot) (8.43 × 10-27 and 8.35 × 10-27 esu) and second hyperpolarizability (γtot) (13.20 × 10-32 and 13.0 × 10-32 esu) values as compared to the other derivatives. In nutshell, structural modeling of CPT based chromophores with extended acceptors, can be significantly utilized to achieve potential NLO materials.

Exploring the potential of thiophene derivatives as dual inhibitors of ß-tubulin and Wnt/ß-catenin pathways for gastrointestinal cancers in vitro.

Background: Gastrointestinal cancer poses a considerable global health risk, encompassing a heterogeneous spectrum of malignancies that afflict the gastrointestinal tract. It is significant to develop efficacious therapeutic agents, as they are indispensable for both the treatment and prevention of this formidable disease. Methods: In this study, we synthesized a novel thiophene derivative, designated as compound 1312. An assessment was performed to investigate its anti-proliferative activity in several cancer cell lines (GES-1, EC9706, SGC7901, and HT-29). Furthermore, we performed molecular biology techniques to investigate the inhibitory impact of compound 1312 on gastrointestinal cell lines SGC-7901 and HT-29. Results: Our findings reveal that compound 1312 exhibits significant efficacy in suppressing colony formation of cancer cells. Notably, it triggers cell cycle arrest at the G2/M phase in gastrointestinal cell lines SGC7901 and HT-29. Compound 1312 was confirmed to exert inhibitory effects on cell migration and invasion in SGC7901. Additionally, the compound elicits apoptotic cell death through the activation of the DNA repair enzyme poly (ADP-ribose) polymerase (PARP) and the caspase signaling cascade. Furthermore, in vitro experiments revealed that compound 1312 effectively suppresses both the ß-tubulin cytoskeletal network and the Wnt/ß-catenin signaling pathway. These multifaceted anti-cancer activities highlight the potential of compound 1312 as a promising therapeutic agent for the treatment of gastrointestinal malignancies. Conclusion: This study indicates the promising potential of compound 1312 as a prospective candidate agent for gastrointestinal cancer treatment. Further comprehensive investigations are needed to explore its therapeutic efficacy in greater detail.

Symmetry-breaking of Dibenzo[b,d]thiophene Sulfone Enhancing Polaron Generation for Boosted Photocatalytic Hydrogen Evolution.

The current bottleneck in the development of efficient photocatalysts for hydrogen evolution is the limited availability of high-performance acceptor units. Over the past nine years, dibenzo[b,d]thiophene sulfone (DBS) has been the preferred choice for the acceptor unit. Despite extensive exploration of alternative structures as potential replacements for DBS, a superior substitute remains elusive. In this study, a symmetry-breaking strategy was employed on DBS to develop a novel acceptor unit, BBTT-1SO. The asymmetric structure of BBTT-1SO proved beneficial for increasing multiple moment and polarizability. BBTT-1SO-containing polymers showed higher efficiencies for hydrogen evolution than their DBS-containing counterparts by up to 166 %. PBBTT-1SO exhibited an excellent hydrogen evolution rate (HER) of 222.03 mmol g-1 h-1 and an apparent quantum yield of 27.5 % at 500 nm. Transient spectroscopic studies indicated that the BBTT-1SO-based polymers facilitated electron polaron formation, which explains their superior HERs. PBBTT-1SO also showed 14 % higher HER in natural seawater splitting than that in deionized water splitting. Molecular dynamics simulations highlighted the enhanced water-PBBTT-1SO polymer interactions in salt-containing solutions. This study presents a pioneering example of a substitute acceptor unit for DBS in the construction of high-performance photocatalysts for hydrogen evolution.