RESUMO
In van der Waals materials, external strain is an effective tool to manipulate and control electronic responses by changing the electronic bands upon lattice deformation. In particular, the band gap of the layered transition metal pentatelluride HfTe5 is sufficiently small to be inverted by subtle changes of the lattice parameters resulting in a strain-tunable topological phase transition. In that case, knowledge about the spatial homogeneity of electronic properties becomes crucial, especially for the microfabricated thin film circuits used in typical transport measurements. Here, we reveal the homogeneity of exfoliated HfTe5 thin films by spatially resolved Raman microscopy. Comparing the Raman spectra under applied external strain to unstrained bulk references, we pinpoint local variations of Raman signatures to inhomogeneous strain profiles in the sample. Importantly, our results demonstrate that microfabricated contacts can act as sources of significant inhomogeneities. To mitigate the impact of unintentional strain and its corresponding modifications of the electronic structure, careful Raman microscopy constitutes a valuable tool for quantifying the homogeneity of HfTe5 films and circuits fabricated thereof.
RESUMO
Selective-area epitaxy (SAE) is a useful technique to grow epitaxial films with a desired shape on a prepatterned substrate. Although SAE of patterned topological-insulator (TI) thin films has been performed in the past, there has been no report of SAE-grown TI structures that are bulk-insulating. Here we report the successful growth of Hall-bars and nanowires of bulk-insulating TIs using the SAE technique. Their transport properties show that the quality of the selectively grown structures is comparable to that of bulk-insulating TI films grown on pristine substrates. In SAE-grown TI nanowires, we were able to observe Aharonov-Bohm-like magnetoresistance oscillations that are characteristic of the quantum-confined topological surface states. The availability of bulk-insulating TI nanostructures via the SAE technique opens the possibility to fabricate intricate topological devices in a scalable manner.
RESUMO
The natural van der Waals superlattice MnBi2Te4-(Bi2Te3)m provides an optimal platform to combine topology and magnetism in one system with minimal structural disorder. Here, we show that this system can harbor both ferromagnetic (FM) and antiferromagnetic (AFM) orders and that these magnetic orders can be controlled in two different ways by either varying the Mn-Mn distance while keeping the Bi2Te3/MnBi2Te4 ratio constant or vice versa. We achieve this by creating atomically engineered sandwich structures composed of Bi2Te3 and MnBi2Te4 layers. We show that the AFM order is exclusively determined by the Mn-Mn distance, whereas the FM order depends only on the overall Bi2Te3/MnBi2Te4 ratio regardless of the distance between the MnBi2Te4 layers. Our results shed light on the origins of the AFM and FM orders and provide insights into how to manipulate magnetic orders not only for the MnBi2Te4-Bi2Te3 system but also for other magneto-topological materials.
RESUMO
The demand for miniaturized and integrated multifunctional devices drives the progression of high-performance infrared photodetectors for diverse applications, including remote sensing, air defense, and communications, among others. Nonetheless, infrared photodetectors that rely solely on single low-dimensional materials often face challenges due to the limited absorption cross-section and suboptimal carrier mobility, which can impair sensitivity and prolong response times. Here, through experimental validation is demonstrated, precise control over energy band alignment in a type-II van der Waals heterojunction, comprising vertically stacked 2D Ta2NiSe5 and the topological insulator Bi2Se3, where the configuration enables polarization-sensitive, wide-spectral-range photodetection. Experimental evaluations at room temperature reveal that the device exhibits a self-powered responsivity of 0.48 A·W-1, a specific directivity of 3.8 × 1011 cm·Hz1/2·W-1, a response time of 151 µs, and a polarization ratio of 2.83. The stable and rapid photoresponse of the device underpins the utility in infrared-coded communication and dual-channel imaging, showing the substantial potential of the detector. These findings articulate a systematic approach to developing miniaturized, multifunctional room-temperature infrared detectors with superior performance metrics and enhanced capabilities for multi-information acquisition.
RESUMO
We present a new high-efficiency splitter waveguide design based on photonic topological insulators. The system's robust edge states allow electromagnetic waves to propagate in the 2D waveguide without backscattering, resulting in almost 100% transmission in the outputs. We also study resonating modes in the structure and show that introducing specific defects can create such modes. We consider four domains with rods of varying magneto-optical properties to provide edge modes in the system. By eliminating rows and columns of rods, we calculate the transmission at the outputs, revealing resonating modes in the middle of the structure with spatial symmetry. Our calculations indicate that the most promising resonating mode occurs when two rods and two columns are eliminated, with a quality factor Q = 1.02 × 106 at frequency f = 8.23 GHz and almost zero transmission at this frequency to the outputs. We further confirm our results using the transmission line resonator model as a semi-analytical model, which agrees well with our findings.
RESUMO
Magnetic topological materials with coexisting magnetism and nontrivial band structures exhibit many novel quantum phenomena, including the quantum anomalous Hall effect, the axion insulator state, and the Weyl semimetal phase. As a stoichiometric layered antiferromagnetic topological insulator, thin films of MnBi2Te4 show fascinating even-odd layer-dependent physics. In this work, we fabricate a series of thin-flake MnBi2Te4 devices using stencil masks and observe the Chern insulator state at high magnetic fields. Upon magnetic field training, a large exchange bias effect is observed in odd but not in even septuple layer (SL) devices. Through theoretical calculations, we attribute the even-odd layer-dependent exchange bias effect to the contrasting surface and bulk magnetic properties of MnBi2Te4 devices. Our findings reveal the microscopic magnetic configuration of MnBi2Te4 thin flakes and highlight the challenges in replicating the zero magnetic field quantum anomalous Hall effect in odd SL MnBi2Te4 devices.
RESUMO
Epitaxial heterostructures with topological insulators enable novel quantum phases and practical device applications. Their topological electronic states are sensitive to the microscopic parameters, including structural inversion asymmetry (SIA), which is an inherent feature of many real heterostructures. Controlling SIA is challenging, because it requires the ability to tune the displacement field across the topological film. Here, using nanopatterned gates, we demonstrate a tunable displacement field in a heterostructure of the two-dimensional topological insulator cadmium arsenide. Transport studies in magnetic fields reveal an extreme sensitivity of the band inversion to SIA. We show that a relatively small displacement field (â¼50 mV/nm) converts the crossing of the two zeroth Landau levels in magnetic field to an avoided crossing, signaling a change to trivial band order. This work demonstrates a universal methodology for tuning electronic states in topological thin films.
RESUMO
Highly crystalline and easily feasible topological insulator-superconductor (TI-SC) heterostructures are crucial for the development of practical topological qubit devices. The optimal superconducting layer for TI-SC heterostructures should be highly resilient against external contamination and structurally compatible with TIs. In this study, we provide a solution to this challenge by showcasing the growth of a highly crystalline TI-SC heterostructure using refractory TiN (111) as the superconducting layer. This approach can eliminate the need for in situ cleavage or growth. More importantly, the TiN surface shows high resilience against contaminations during air exposure, as demonstrated by the successful recyclable growth of Bi2Se3. Our findings indicate that TI-SC heterostructures based on nitride films are compatible with device fabrication techniques, paving the way to the realization of practical topological qubit devices in the future.
RESUMO
In this study, we have designed an electrochemical biosensor based on topological material Bi2Se3 for the sensitive detection of SARS-CoV-2 in the COVID-19 pandemic. Flake-shaped Bi2Se3 was obtained directly from high-quality single crystals using mechanical exfoliation, and the single-stranded DNA was immobilized onto it. Under optimal conditions, the peak current of the differential pulse voltammetry method exhibited a linear relationship with the logarithm of the concentration of target-complementary-stranded DNA, ranging from 1.0 × 10-15 to 1.0 × 10-11 M, with a detection limit of 3.46 × 10-16 M. The topological material Bi2Se3, with Dirac surface states, enhanced the signal-to-interference plus noise ratio of the electrochemical measurements, thereby improving the sensitivity of the sensor. Furthermore, the electrochemical sensor demonstrated excellent specificity in recognizing RNA. It can detect complementary RNA by amplifying and transcribing the initial DNA template, with an initial DNA template concentration ranging from 1.0 × 10-18 to 1.0 × 10-15 M. Furthermore, the sensor also effectively distinguished negative and positive results by detecting splitting-synthetic SARS-CoV-2 pseudovirus with a concentration of 1 copy/µL input. Our work underscores the immense potential of the electrochemical sensing platform based on the topological material Bi2Se3 in the detection of pathogens during the rapid spread of acute infectious diseases.
Assuntos
Técnicas Biossensoriais , Bismuto , COVID-19 , Técnicas Eletroquímicas , Limite de Detecção , SARS-CoV-2 , Técnicas Biossensoriais/métodos , SARS-CoV-2/genética , SARS-CoV-2/isolamento & purificação , COVID-19/diagnóstico , COVID-19/virologia , Bismuto/química , Técnicas Eletroquímicas/métodos , Humanos , DNA de Cadeia Simples/química , DNA de Cadeia Simples/genética , RNA Viral/genética , RNA Viral/análise , Compostos de Selênio/químicaRESUMO
The plateau phase transition in quantum anomalous Hall (QAH) insulators corresponds to a quantum state wherein a single magnetic domain gives way to multiple domains and then reconverges back to a single magnetic domain. The layer structure of the sample provides an external knob for adjusting the Chern number C of the QAH insulators. Here, we employ molecular beam epitaxy to grow magnetic topological insulator multilayers and realize the magnetic field-driven plateau phase transition between two QAH states with odd Chern number change ΔC. We find that critical exponents extracted for the plateau phase transitions with ΔC = 1 and ΔC = 3 in QAH insulators are nearly identical. We construct a four-layer Chalker-Coddington network model to understand the consistent critical exponents for the plateau phase transitions with ΔC = 1 and ΔC = 3. This work will motivate further investigations into the critical behaviors of plateau phase transitions with different ΔC in QAH insulators.
RESUMO
The interface of two materials can harbor unexpected emergent phenomena. One example is interface-induced superconductivity. In this work, we employ molecular beam epitaxy to grow a series of heterostructures formed by stacking together two nonsuperconducting antiferromagnetic materials, an intrinsic antiferromagnetic topological insulator MnBi2Te4 and an antiferromagnetic iron chalcogenide FeTe. Our electrical transport measurements reveal interface-induced superconductivity in these heterostructures. By performing scanning tunneling microscopy and spectroscopy measurements, we observe a proximity-induced superconducting gap on the top surface of the MnBi2Te4 layer, confirming the coexistence of superconductivity and antiferromagnetism in the MnBi2Te4 layer. Our findings will advance the fundamental inquiries into the topological superconducting phase in hybrid devices and provide a promising platform for the exploration of chiral Majorana physics in MnBi2Te4-based heterostructures.
RESUMO
Photovoltaic efficiency in solar cells is hindered by many unwanted effects. Radiative channels (emission of photons) sometimes mediated by nonradiative ones (emission of phonons) are principally responsible for the decrease in exciton population before charge separation can take place. One such mechanism is electron-hole recombination at surfaces or defects where the in-gap edge states serve as the nonradiative channels. In topological insulators (TIs), which are rarely explored from an optoelectronics standpoint, we show that their characteristic surface states constitute a nonradiative decay channel that can be exploited to generate a protected photovoltaic current. Focusing on two-dimensional TIs, and specifically for illustration purposes on a Bi(111) monolayer, we obtain the transition rates from the bulk excitons to the edge states. By breaking the appropriate symmetries of the system, one can induce an edge charge accumulation and edge currents under illumination, demonstrating the potential of TI nanoribbons for photovoltaics.
RESUMO
Ultrathin topological insulator membranes are building blocks of exotic quantum matter. However, traditional epitaxy of these materials does not facilitate stacking in arbitrary orders, while mechanical exfoliation from bulk crystals is also challenging due to the non-negligible interlayer coupling therein. Here we liberate millimeter-scale films of the topological insulator Bi2Se3, grown by molecular beam epitaxy, down to 3 quintuple layers. We characterize the preservation of the topological surface states and quantum well states in transferred Bi2Se3 films using angle-resolved photoemission spectroscopy. Leveraging the photon-energy-dependent surface sensitivity, the photoemission spectra taken with 6 and 21.2 eV photons reveal a transfer-induced migration of the topological surface states from the top to the inner layers. By establishing clear electronic structures of the transferred films and unveiling the wave function relocation of the topological surface states, our work lays the physics foundation crucial for the future fabrication of artificially stacked topological materials with single-layer precision.
RESUMO
Topological insulators (TI) hold significant potential for various electronic and optoelectronic devices that rely on the Dirac surface state (DSS), including spintronic and thermoelectric devices, as well as terahertz detectors. The behavior of electrons within the DSS plays a pivotal role in the performance of such devices. It is expected that DSS appear on a surface of three dimensional(3D) TI by mechanical exfoliation. However, it is not always the case that the surface terminating atomic configuration and corresponding band structures are homogeneous. In order to investigate the impact of surface terminating atomic configurations on electron dynamics, we meticulously examined the electron dynamics at the exfoliated surface of a crystalline 3D TI (Bi 2 Se 3 ) with time, space, and energy resolutions. Based on our comprehensive band structure calculations, we found that on one of the Se-terminated surfaces, DSS is located within the bulk band gap, with no other surface states manifesting within this region. On this particular surface, photoexcited electrons within the conduction band effectively relax towards DSS and tend to linger at the Dirac point for extended periods of time. It is worth emphasizing that these distinct characteristics of DSS are exclusively observed on this particular surface.
RESUMO
Non-centrosymmetric topological material has attracted intense attention due to its superior characteristics as compared with the centrosymmetric one, although probing the local quantum geometry in non-centrosymmetric topological material remains challenging. The non-linear Hall (NLH) effect provides an ideal tool to investigate the local quantum geometry. Here, we report a non-centrosymmetric topological phase in ZrTe5, probed by using the NLH effect. The angle-resolved and temperature-dependent NLH measurement reveals the inversion and ab-plane mirror symmetries breaking at <30 K, consistently with our theoretical calculation. Our findings identify a new non-centrosymmetric phase of ZrTe5 and provide a platform to probe and control local quantum geometry via crystal symmetries.
RESUMO
Two-dimensional topological insulators have attracted much interest due to their potential applications in spintronics and quantum computing. To access the exotic physical phenomena, a gate electric field is required to tune the Fermi level into the bulk band gap. Hexagonal boron nitride (h-BN) is a promising alternative gate dielectric due to its unique advantages such as flat and charge-free surface. Here we present a h-BN/graphite van der Waals heterostructure as a top gate on HgTe heterostructure-based Hall bar devices. We compare our results to devices with h-BN/Ti/Au and HfO2/Ti/Au gates. Devices with a h-BN/graphite gate show no charge carrier density shift compared to as-grown structures, in contrast to a significant n-type carrier density increase for HfO2/Ti/Au. We attribute this observation mainly to the comparable work function of HgTe and graphite. In addition, devices with h-BN gate dielectric show slightly higher electron mobility compared to HfO2-based devices. Our results demonstrate the compatibility between layered materials transfer and wet-etched structures and provide a strategy to solve the issue of significant shifts of the carrier density in gated HgTe heterostructures.
RESUMO
The defects have a remarkable influence on the electronic structures and the electric transport behaviors of the matter, providing the additional means to engineering their physical properties. In this work, a comprehensive study on the effect of Br-vacancies on the electronic structures and transport behaviors in the high-order topological insulator Bi4Br4 is performed by the combined techniques of the scanning tunneling microscopy (STM), angle-resolved photoemission spectroscopy (ARPES), and physical properties measurement system along with the first-principle calculations. The STM results show the defects on the cleaved surface of a single crystal and reveal that the defects are correlated to the Br-vacancies with the support of the simulated STM images. The role of the Br-vacancies in the modulation of the band structures has been identified by ARPES spectra and the calculated energy-momentum dispersion. The relationship between the Br-vacancies and the semiconducting-like transport behaviors at low temperature has been established, implying a Mott variable ranging hopping conduction in Bi4Br4. The work not only resolves the unclear transport behaviors in this matter, but also paves a way to modulate the electric conduction path by the defects engineering.
RESUMO
We have,in-situ, prepared and measured the temperature dependence of thermopowerS(T) and resistanceR(T) of Bi2Te3topological insulator (TI) thin films in the amorphous and crystalline phase. Samples were prepared by sequential flash-evaporation at liquid4He temperature. TheS(T) in the amorphous phase is negative and much larger compared to other known amorphous materials, while in the crystalline phase it is also negative and behaves linearly with the temperature. The resistivityρ(T)in the amorphous phase shows a semiconducting like behavior that changes to a linear metallic behavior after crystallization.S(T) anρ(T)results in the crystalline phase are in good agreement with results obtained both in bulk and thin films reported in the literature. Linear behavior of theρ(T)forT > 15 K indicates the typical metallic contribution from the surface states as observed in other TI novel materials. The low temperature conductivityT < 10 K exhibits logarithmic temperature dependent positive slopeκ ≈ 0.21, indicating the dominance of electron-electron interaction (EEI) over the quantum interference effect, with a clear two dimensional nature of the contribution. Raman spectroscopy showed that the sample has crystallized in the trigonalR3-mspace group. Energy-dispersive x-ray spectroscopy reveales high homogeneity in the concentration and no magnetic impurities introduced during preparation or growth.
RESUMO
Ternary topological insulators have attracted worldwide attention because of their broad application prospects in fields such as magnetism, optics, electronics, and quantum computing. However, their potential and electrochemical mechanisms in sodium ion batteries (SIBs) and hybrid capacitors (SIHCs) have not been fully studied. Herein, a composite material comprising vacancy-defects ternary topological insulator Bi2Se2Te encapsulated in mesoporous carbon spheres (Bi2Se2Te@C) is designed. Bi2Se2Te with ample vacancy-defects has a wide interlayer spacing to enable frequent insertion/extraction of Na+ and boost reaction kinetics within the electrode. Meanwhile, the Bi2Se2Te@C with optimized yolk-shell structure can buffer the volume variation without breaking the outer protective carbon shell, ensuring structural stability and integrity. As expected, the Bi2Se2Te@C electrode delivers high reversible capacity and excellent rate capability in half SIB cells. Various electrochemical analyses and theoretical calculations manifest that Bi2Se2Te@C anode confirms the synergistic effect of ternary chalcogenide systems and suitable void space yolk-shell structure. Consequently, the full cells of SIB and SIHC coupled with Bi2Se2Te@C anode exhibit good performance and high energy/power density, indicating its widespread practical applications. This design is expected to offer a reliable strategy for further exploring advanced topological insulators in Na+-based storage systems.
RESUMO
Dynamic tuning of thermal transport in solids is scientifically intriguing with wide applications for thermal transport control in electronic devices. In this work, we demonstrate a thermal transistor, a device in which heat flow can be regulated using external control, realized in a topological insulator (TI) through the topological surface states. The tuning of thermal transport is achieved by using optical gating of a thin dielectric layer deposited on the TI film. The gate-dependent thermal conductivity is measured using micro-Raman thermometry. The transistor has a large ON/OFF ratio of 2.8 at room temperature and can be continuously and repetitively switched in tens of seconds by optical gating and potentially much faster by electrical gating. Such thermal transistors with a large ON/OFF ratio and fast switching times offer the possibilities of smart thermal devices for active thermal management and control in future electronic systems.