Detection and Anti-Detection with Microwave-Infrared Compatible Camouflage Using Asymmetric Composite Metasurface.

Detection and anti-detection with multispectral camouflage are of pivotal importance, while suffer from significant challenges due to the inherent contradiction between detection and anti-detection and conflict microwave and infrared (IR) stealth mechanisms. Here, a strategy is proposed to asymmetrically control transmitted microwave wavefront under radar-IR bi-stealth scheme using composite metasurface. It is engineered composed of infrared stealth layer (IRSL), microwave absorbing layer (MAL), and asymmetric microwave transmissive structure (AMTS) with polarization conversion from top to bottom. Therein, IR emissivity, microwave reflectivity, and transmissivity are simultaneously modulated by elaborately designing the filling ratio of ITO square patches on IRSL, which ensures both efficient microwave transmission and IR camouflage. Furthermore, full-polarized backward microwave stealth is achieved on MAL by transmitting and absorbing microwaves under x- and y- polarization, respectively, while forward wavefront is controlled by precise curvature phase compensation on AMTS according to ray-tracing technology. For verification, a proof-of-concept metadevice is numerically and experimentally characterized. Both results coincide well, demonstrating spiral detective wavefront manipulation under y-polarized forward wave excitation while effective reduction of radar cross section within 8-18 GHz and low IR emissivity (<0.3) for backward detection. This strategy provides a new paradigm for integration of detection and anti-detection with multispectral camouflage.

Controlling cantilevered adaptive X-ray mirrors.

Modeling the behavior of a prototype cantilevered X-ray adaptive mirror (held from one end) demonstrates its potential for use on high-performance X-ray beamlines. Similar adaptive mirrors are used on X-ray beamlines to compensate optical aberrations, control wavefronts and tune mirror focal distances at will. Controlled by 1D arrays of piezoceramic actuators, these glancing-incidence mirrors can provide nanometre-scale surface shape adjustment capabilities. However, significant engineering challenges remain for mounting them with low distortion and low environmental sensitivity. Finite-element analysis is used to predict the micron-scale full actuation surface shape from each channel and then linear modeling is applied to investigate the mirrors' ability to reach target profiles. Using either uniform or arbitrary spatial weighting, actuator voltages are optimized using a Moore-Penrose matrix inverse, or pseudoinverse, revealing a spatial dependence on the shape fitting with increasing fidelity farther from the mount.

Dynamic and Polarization-Independent Wavefront Control Based on Hybrid Topological Metasurfaces.

Exceptional points (EPs), known as non-Hermitian singularities, have been observed and investigated in parity-time symmetric metasurfaces. However, the chirality and tunability in non-Hermitian metasurfaces still need to be explored. Here, we propose a dynamic topological metasurface with the meta-atom consisting of two orthogonally oriented nanorods, which are placed on the phase change material Ge2Sb2Te5 (GST) and SiO2 dielectric layer, respectively. When GST is converted from the amorphous state (a-GST) to the crystalline state (c-GST), an EP can be dynamically switched from the "ON" state to the "OFF" state in a parameter space. Moreover, based on the topologically protected phase and amplitude modulations of the cross-polarization component, the phase-only hologram and amplitude-only hologram are engineered in the a-GST case and concealed in the c-GST case. Finally, we explore the 2D-chiral symmetry of meta-atoms and further propose two spin-selective meta-deflectors and a hybrid meta-deflector operating with arbitrary polarizations. The GST-based hybrid metasurface offers richer possibilities to realize various wavefront controls.

Investigation of PZT Materials for Reliable Piezostack Deformable Mirror with Modular Design.

This article presents a study of the electrophysical properties of a piezoceramic material for use in adaptive optics. The key characteristics that may be important for the manufacturing of piezoelectric deformable mirrors are the following: piezoelectric constants (d31, d33, d15), capacitance, elastic compliance values s for different crystal directions, and the dielectric loss tangent (tgδ). Based on PZT ceramics, the PKP-12 material was developed with high values of the dielectric constant, piezoelectric modulus, and electromechanical coupling coefficients. The deformable mirror control elements are made from the resulting material-piezoceramic combs with five individual actuators in a row. In this case, the stroke of the actuator is in the range of 4.1-4.3 microns and the capacitance of the actuator is about 12 nF.

Continuously Tunable Optical Modulation Using Vanadium Dioxide Huygens Metasurfaces.

Efficient and dynamic light manipulation at small scale is highly desirable for many photonics applications. Active optical metasurfaces represent a useful way of achieving this due to their creative design potential, compact footprint, and low power consumption, paving the way toward the realization of chip-scale photonic devices with tunable optical functionality on demand. Here, we demonstrate a dynamically tunable, dual-function metasurface based on dielectric resonances in vanadium dioxide that is capable of independent active amplitude and phase control without the use of mechanical parts. Significant developments in the nanofabrication of vanadium dioxide have been shown to enable this metasurface. Gradual thermal control of the metasurface yields a computationally predicted continuously tuned amplitude modulation of 19 dB with negligible phase modulation and a continuously tuned phase modulation of 228° with negligible amplitude modulation, both at near-infrared wavelengths. Experimentally, a maximum continuously tuned amplitude modulation of 9.6 dB and phase modulation of 120° are shown, along with demonstration of stable intermediate states and repeated modulation without degradation. Reprogrammable optical functionality can thus be achieved in precisely engineered nanoantenna arrays for adaptive modulation of amplitude and phase of light for applications such as tunable holograms, lenses, and beam deflectors.

Electrically Tunable Reflective Metasurfaces with Continuous and Full-Phase Modulation for High-Efficiency Wavefront Control at Visible Frequencies.

All-dielectric optical metasurfaces can locally control the amplitude and phase of light at the nanoscale, enabling arbitrary wavefront shaping. However, lack of postfabrication tunability has limited the true potential of metasurfaces for many applications. Here, we utilize a thin liquid crystal (LC) layer as a tunable medium surrounding the metasurface to achieve a phase-only spatial light modulator (SLM) with high reflection in the visible frequency, exhibiting active and continuous resonance tuning with associated 2π phase control and uncoupled amplitude. Dynamic wavefront shaping is demonstrated by programming 96 individually addressable electrodes with a small pixel pitch of ∼1 µm. The small pixel size is facilitated by the reduced LC thickness, strongly suppressing cross-talk among pixels. This device is used to demonstrate dynamic beam steering with a wide field-of-view and high absolute diffraction efficiencies. We believe that our demonstration may help realize next-generation, high-resolution SLMs, with wide applications in dynamic holography, tunable optics, and light detection and ranging (LiDAR), to mention a few.

Dynamic Ultrasound Projector Controlled by Light.

Dynamic acoustic wavefront control is essential for many acoustic applications, including biomedical imaging and particle manipulation. Conventional methods are either static or in the case of phased transducer arrays are limited to a few elements and hence limited control. Here, a dynamic acoustic wavefront control method based on light patterns that locally trigger the generation of microbubbles is introduced. As a small gas bubble can effectively stop ultrasound transmission in a liquid, the optical images are used to drive a short electrolysis and form microbubble patterns. The generation of microbubbles is controlled by structured light projection at a low intensity of 65 mW cm-2 and only requires about 100 ms. The bubble pattern is thus able to modify the wavefront of acoustic waves from a single transducer. The method is employed to realize an acoustic projector that can generate various acoustic images and patterns, including multiple foci and acoustic phase gradients. Hydrophone scans show that the acoustic field after the modulation by the microbubble pattern forms according to the prediction. It is believed that combining a versatile optical projector to realize an ultrasound projector is a general scheme, which can benefit a multitude of applications based on dynamic acoustic fields.

Tailoring Third-Harmonic Diffraction Efficiency by Hybrid Modes in High-Q Metasurfaces.

Metasurfaces are versatile tools for manipulating light; however, they have received little attention as devices for the efficient control of nonlinearly diffracted light. Here, we demonstrate nonlinear wavefront control through third-harmonic generation (THG) beaming into diffraction orders with efficiency tuned by excitation of hybrid Mie-quasi-bound states in the continuum (BIC) modes in a silicon metasurface. Simultaneous excitation of the high-Q collective Mie-type modes and quasi-BIC modes leads to their hybridization and results in a local electric field redistribution. We probe the hybrid mode by measuring far-field patterns of THG and observe the strong switching between (0,-1) and (-1,0) THG diffraction orders from 1:6 for off-resonant excitation to 129:1 for the hybrid mode excitation, showing tremendous contrast in controlling the nonlinear diffraction patterns. Our results pave the way to the realization of metasurfaces for novel light sources, telecommunications, and quantum photonics.

Real Time Generation of Three Dimensional Patterns for Multiphoton Stimulation.

The advent of optogenetics has revolutionized experimental research in the field of Neuroscience and the possibility to selectively stimulate neurons in 3D volumes has opened new routes in the understanding of brain dynamics and functions. The combination of multiphoton excitation and optogenetic methods allows to identify and excite specific neuronal targets by means of the generation of cloud of excitation points. The most widely employed approach to produce the points cloud is through a spatial light modulation (SLM) which works with a refresh rate of tens of Hz. However, the computational time requested to calculate 3D patterns ranges between a few seconds and a few minutes, strongly limiting the overall performance of the system. The maximum speed of SLM can in fact be employed either with high quality patterns embedded into pre-calculated sequences or with low quality patterns for real time update. Here, we propose the implementation of a recently developed compressed sensing Gerchberg-Saxton algorithm on a consumer graphical processor unit allowing the generation of high quality patterns at video rate. This, would in turn dramatically reduce dead times in the experimental sessions, and could enable applications previously impossible, such as the control of neuronal network activity driven by the feedback from single neurons functional signals detected through calcium or voltage imaging or the real time compensation of motion artifacts.

Coupling Plasmonic System for Efficient Wavefront Control.

Efficient and flexible manipulation of electromagnetic waves using metasurfaces has attracted continuous attention in recent years. However, previous studies mainly apply sole resonance effect to accomplish the task. Here, we show that introducing a meta-coupling effect would reveal further physical insights in the electromagnetic wave control. To demonstrate this, a reflection-type coupling system composed by two identical linear resonances in a metal-insulator-metal configuration is theoretically proposed using the coupled-mode theory, whose phase diagram can be well controlled upon the coupling changes. Such intriguing optical property is verified by a double C-shaped resonator in the terahertz regime, where the coupling effect can be tuned by changing their either relative distance or rotation. More importantly, the reflection phase shift around the working frequency can be efficiently engineered without having to change the dimensions of the resonators. Two efficient anomalous metasurface deflectors are designed and experimentally characterized, whose maximum measured efficiency is more than 70%. The proposed controlling strategy further enriches the designing freedoms of metasurfaces and may find broad applications in realizing efficient and tunable functional devices.

MEMS Deformable Mirrors for Space-Based High-Contrast Imaging.

Micro-Electro-Mechanical Systems (MEMS) Deformable Mirrors (DMs) enable precise wavefront control for optical systems. This technology can be used to meet the extreme wavefront control requirements for high contrast imaging of exoplanets with coronagraph instruments. MEMS DM technology is being demonstrated and developed in preparation for future exoplanet high contrast imaging space telescopes, including the Wide Field Infrared Survey Telescope (WFIRST) mission which supported the development of a 2040 actuator MEMS DM. In this paper, we discuss ground testing results and several projects which demonstrate the operation of MEMS DMs in the space environment. The missions include the Planet Imaging Concept Testbed Using a Recoverable Experiment (PICTURE) sounding rocket (launched 2011), the Planet Imaging Coronagraphic Technology Using a Reconfigurable Experimental Base (PICTURE-B) sounding rocket (launched 2015), the Planetary Imaging Concept Testbed Using a Recoverable Experiment - Coronagraph (PICTURE-C) high altitude balloon (expected launch 2019), the High Contrast Imaging Balloon System (HiCIBaS) high altitude balloon (launched 2018), and the Deformable Mirror Demonstration Mission (DeMi) CubeSat mission (expected launch late 2019). We summarize results from the previously flown missions and objectives for the missions that are next on the pad. PICTURE had technical difficulties with the sounding rocket telemetry system. PICTURE-B demonstrated functionality at >100 km altitude after the payload experienced 12-g RMS (Vehicle Level 2) test and sounding rocket launch loads. The PICTURE-C balloon aims to demonstrate 10 - 7 contrast using a vector vortex coronagraph, image plane wavefront sensor, and a 952 actuator MEMS DM. The HiClBaS flight experienced a DM cabling issue, but the 37-segment hexagonal piston-tip-tilt DM is operational post-flight. The DeMi mission aims to demonstrate wavefront control to a precision of less than 100 nm RMS in space with a 140 actuator MEMS DM.

Nonlinear Wavefront Control with All-Dielectric Metasurfaces.

Metasurfaces, two-dimensional lattices of nanoscale resonators, offer unique opportunities for functional flat optics and allow the control of the transmission, reflection, and polarization of a wavefront of light. Recently, all-dielectric metasurfaces reached remarkable efficiencies, often matching or out-performing conventional optical elements. The exploitation of the nonlinear optical response of metasurfaces offers a paradigm shift in nonlinear optics, and dielectric nonlinear metasurfaces are expected to enrich subwavelength photonics by enhancing substantially nonlinear response of natural materials combined with the efficient control of the phase of nonlinear waves. Here, we suggest a novel and rather general approach for engineering the wavefront of parametric waves of arbitrary complexity generated by a nonlinear metasurface. We design all-dielectric nonlinear metasurfaces, achieve a highly efficient wavefront control of a third-harmonic field, and demonstrate the generation of nonlinear beams at a designed angle and the generation of nonlinear focusing vortex beams. Our nonlinear metasurfaces produce phase gradients over a full 0-2π phase range with a 92% diffraction efficiency.

Interleaved segment correction achieves higher improvement factors in using genetic algorithm to optimize light focusing through scattering media.

Focusing and imaging through scattering media has been proved possible with high resolution wavefront shaping. A completely scrambled scattering field can be corrected by applying a correction phase mask on a phase only spatial light modulator (SLM) and thereby the focusing quality can be improved. The correction phase is often found by global searching algorithms, among which Genetic Algorithm (GA) stands out for its parallel optimization process and high performance in noisy environment. However, the convergence of GA slows down gradually with the progression of optimization, causing the improvement factor of optimization to reach a plateau eventually. In this report, we propose an interleaved segment correction (ISC) method that can significantly boost the improvement factor with the same number of iterations comparing with the conventional all segment correction (ASC) method. In the ISC method, all the phase segments are divided into a number of interleaved groups; GA optimization procedures are performed individually and sequentially among each group of segments. The final correction phase mask is formed by applying correction phases of all interleaved groups together on the SLM. The ISC method has been proved significantly useful in practice because of its ability to achieve better improvement factors when noise is present in the system. We have also demonstrated that the imaging quality is improved as better correction phases are found and applied on the SLM. Additionally, the ISC method lowers the demand of dynamic ranges of detection devices. The proposed method holds potential in applications, such as high-resolution imaging in deep tissue.