Prediction of sediment transport capacity based on slope gradients and flow discharge.

Sediment transport capacity (Tc) is an essential parameter in the establishment of the slope soil erosion model. Slope type is an important crucial factor affecting sediment transport capacity of overland flow, and vegetation can effectively inhibit soil loss. Two new formulae of sediment transport capacity (Tc) are proposed of brown soil slope and vegetation slope in this study and evaluate the influence of slope gradient (S) and flow discharge (Q) on sediment transport capacity of different slope types. Laboratory experiments conducted using four flow discharges (0.35, 0.45, 0.55, and 0.65 L s-1), four slope gradients (3, 6, 9, and 12°), and two kinds of underlying surface (Brown soil slope, Vegetation slope). The soil particle size range is 0.05-0.5mm. The vegetation stems were 2mm in diameter and randomly arranged. The results show that the sediment transport capacity was positively correlated with the flow discharge and slope gradient. The vegetation slope's average sediment transport capacity is 11.80% higher than the brown soil slope that same discharge and slope gradient conditions. The sensitivity of sediment transport capacity to flow discharge on brown soil slope is higher than that of slope gradient. The sensitivity of sediment transport capacity of vegetation slope to slope gradient is more heightened than flow discharge. The sediment transport capacity was well predicted by discharge and slope gradient on brown soil slope (R2 = 0.982) and vegetation slope (R2 = 0.993). This method is helpful to promote the study of the sediment transport process on overland flow.

Health Technology Assessment of a new water quality monitoring technology: Impact of automation, digitalization and remoteness in dialysis units.

BACKGROUND: Water quality monitoring at the dialysis units (DU) is essential to ensure an appropriate dialysis fluid quality and guarantee an optimal and safe dialysis treatment to patients. This paper aims to evaluate the effectiveness, economic and organizational impact of automation, digitalization and remote water quality monitoring, through a New Water Technology (NWT) at a hospital DU to produce dialysis water, compared to a Conventional Water Technology (CWT). METHODS: A before-and-after study was carried out at the Hospital Clínic Barcelona. Data on CWT was collected during 1-year (control) and 7-month for the NWT (case). Data on water quality, resource use and unit cost were retrospective and prospectively collected. A comparative effectiveness analysis on the compliance rate of quality water parameters with the international guidelines between the NWT and the CWT was conducted. This was followed by a cost-minimization analysis and an organizational impact from the hospital perspective. An extensive deterministic sensitivity analysis was also performed. RESULTS: The NWT compared to the CWT showed no differences on effectiveness measured as the compliance rate on international requirements on water quality (100% vs. 100%), but the NWT yielded savings of 3,599 EUR/year compared to the CWT. The NWT offered more data accuracy (daily measures: 6 vs. 1 and missing data: 0 vs. 20 days/year), optimization of the DU employees' workload (attendance to DU: 4 vs. 19 days/month) and workflow, through the remote and continuous monitoring, reliability of data and process regarding audits for quality control. CONCLUSIONS: While the compliance of international recommendations on continuous monitoring was performed with the CWT, the NWT was efficient compared to the CWT, mainly due to the travel time needed by the technical operator to attend the DU. These results were scalable to other economic contexts. Nonetheless, they should be taken with caution either when the NWT equipment/maintenance cost are largely increased, or the workforce involvement is diminished.

Water Quality for Cattle: Metalloid and Metal Contamination of Water.

Water is the most important nutrient for rangeland livestock. However, competition with municipalities, industry, and other water users often results in grazing livestock being forced to use water supplies that are less than perfect. Surface water in western rangleands are often contaminated by mineral extraction, irrigation runoff and other human activities. Mineral contaminants in drinking water are additive with similar contaminants in feedstuffs. The goal of this article is to provide producers and veterinarians with the basic background to make informed decisions about whether a given water supply is "safe" for livestock.

Intersectoral (in)activity: towards an understanding of public sector department links between water, sanitation and hygiene (WASH) and childhood undernutrition in South Africa.

Associations between different forms of malnutrition and environmental conditions, including water, sanitation and hygiene (WASH), contribute to poor child health, nutritional status and physical growth. The primary responsibility for the provision of water and sanitation, as a basic service and human right, lies with the State, as such, a number of stakeholders are involved. Despite relatively high levels of WASH infrastructure coverage in South Africa, enteric infections and stunting remain high for a middle-income country. The aim of this study is to elucidate the landscape of WASH in South Africa in relation to nutritional status of children under the age of 5 years in the South African, Gauteng and City of Johannesburg contexts. The authors detailed the national and provincial public sector departments and through purposive sampling proceeded to map the various departments and associated policies that are responsible for the provision of WASH facilities, as well the nutritional status of children. Of the six policies identified for review, three mentioned WASH, nutrition and children; however, none explicitly linked WASH to nutritional status in children. An in-depth review and analysis of these three crucial policy documents was conducted. Finally, a set of expert interviews were conducted and a consensus development conference convened, with experts at the intersection between WASH and nutritional status. The authors found that the public sector would benefit from better integration of the concept of WASH into their policy, planning and implementation frameworks. The WASH sector should emphasize the role in which WASH plans consider the impact of WASH on the nutritional status of children. The various public sector departments involved in WASH service provision, and other WASH stakeholders, including community-based organizations, non-governmental organizations and intergovernmental organizations, should be involved in the decision-making of the nutrition sector.

Animal Maintenance Systems: Xenopus laevis.

Modular recirculating animal aquaculture systems incorporate UV sterilization and biological, mechanical, and activated carbon filtration, creating a nearly self-contained stable housing environment for Xenopus laevis Nonetheless, minimal water exchange is necessary to mitigate accumulation of metabolic waste, and regular weekly, monthly, and yearly maintenance is needed to ensure accurate and efficient operation. This protocol describes the methods for establishing a new recirculating system and the necessary maintenance, as well as water quality parameters, required for keeping Xenopus laevis.

Implementing the Clean Clinic Approach Improves Water, Sanitation, and Hygiene Quality in Health Facilities in the Western Highlands of Guatemala.

BACKGROUND: Water, sanitation, and hygiene (WASH) services are cornerstones to providing safe health care services and improving patient satisfaction and care seeking. The Clean Clinic Approach (CCA) uses a 10-step process to support health care facilities (HCFs) in making incremental, effective cleanliness and infection prevention and control (IPC) improvements, without relying on external investments. We piloted the CCA in Guatemala and assessed the extent to which it contributed to quality improvements in WASH for IPC. METHODS: After developing an assessment tool tailored to the Guatemalan context, we assessed 11 HCFs in 8 technical areas and scored the facilities on 79 criteria with a total of 100 points. We conducted a baseline assessment (September to October 2018), second assessment (January 2019), and final assessment (February to March 2019). RESULTS: The 11 HCFs improved their average emergency/general ward scores from 41 points at baseline to 87 points at end line, based on a 100-point scale. For delivery wards, the scores increased from 50 to 91 points and for postnatal wards from 46 to 90 points. CONCLUSIONS: The CCA process and tools facilitated a systematic way for HCFs to identify, prioritize, make, and measure WASH quality of care improvements. Training facility staff was fundamental to improving quality standards, and involving medical and administration staff in joint analysis, coordination, and planning sessions was key to integration and teamwork. Further work is needed to increase involvement of local government and community members and to further adapt the process and tools.

Effects of industrial effluents on the quality of water in Namanve stream, Kampala Industrial and Business Park, Uganda.

OBJECTIVE: Kampala Industrial and Business Park (KIBP) is one of the premier and the most successful Ugandan industrial complexes that impact the inner Murchison bay of Lake Victoria. The current study aimed at evaluating the effect of industrial effluents on the physicochemical and microbiological quality of water taken from four different sites along Namanve stream in KIBP, Wakiso district, Uganda. RESULTS: All the water quality parameters were below WHO maximum permissible limits except turbidity, electrical conductivity and Escherichia coli count. Mean values of the monitored water quality parameters increased from the point of effluent discharge downstream of Namanve stream.

Dietary supplementation with Lactobacillus acidophilus enhanced the growth, gut morphometry, antioxidant capacity, and the immune response in juveniles of the common carp, Cyprinus carpio.

This study investigated the effect of Lactobacillus acidophilus-fortified diets on growth performance, antioxidant profiles, and immunity-related gene expressions of common carp, Cyprinus carpio juveniles. Four isonitrogenous diets containing 0, 102, 104, or 106 cfu/mL/kg L. acidophilus were fed to 240 Cyprinus carpio juveniles (mean = 21.34 ± 1.85 g), allotted to 12 rectangular tanks in a completely randomized designed at 3% body weight for 56 days. Growth performance and nutrient utilization were evaluated using standard procedures. Intestinal villi were measured, antioxidant profiles were evaluated from blood sera, and immunity-related gene expressions were evaluated. The results revealed that fish fed dietary 106 had significantly higher weight gain, SGR, feed intake, and lower FCR. Also, villi length, width, and areas of absorption were significantly improved in a dose-dependent manner. Furthermore, innate immune profiles, superoxide dismutase, catalase, respiratory bust activity as well as transforming growth factor beta (TGFß), interleukin 8 (IL-8), and tumor necrosis factor alpha (TNF-alpha) were significantly stimulated. This study evoked that Lactobacillus acidophilus supplementation enhanced better growth performance, improved antioxidant profiles, and modulated expression of immune-related genes of common carp, Cyprinus carpio, than the fish fed control diet. Results show that fish fed fortified diets had better growth performance, improved antioxidant profiles, and modulated expression of immune-related genes.

The importance of sampling technique and rinse water for assessing flexible gastrointestinal endoscope reprocessing: A 3-year study covering 59 centers.

BACKGROUND: Various guidelines recommend several sampling techniques to verify endoscope reprocessing, but a comparative study of the efficiency for recovering microorganisms was rare. Our goal was to compare different sampling techniques for the postreprocessing endoscope to assess residual bacterial contamination and analysis of the critical factors affecting the endoscope reprocessing failure. METHODS: From 2016 to 2018, 3 techniques, the conventional flushing sampling method, flush-brush-flush sampling method (FBFSM), and pump-assisted sampling method (PASM), were compared covering all 59 endoscope units in Tianjin, China. RESULTS: A total of 237 (84.64%) flushing channel samples and 110 (61.11%) final rinse water samples met the Chinese national standard. The univariate analysis showed that the qualified rates of endoscope reprocessing sampled by PASM (65.52%) and FBFSM (75%) were significantly lower than those of the conventional flushing sampling method (91.38%). Five other factors, including the final rinse water, dry, and hospital level, were potential factors besides sample technique. The multivariate logistic analysis indicated only 2 factors (sampling technique and final rinse water) remained in the model. FBFSM, PASM, and the purified water were significantly associated with the odds of endoscope reprocessing failure, with the odds ratio (95% confidence interval) of which were 4.206 (1.757-10.067), 5.326 (2.463-11.645), and 0.309 (0.137-0.695), respectively. CONCLUSIONS: The problem of residual microorganisms of the postreprocessing endoscope was severe. Sampling technique and final rinse water were critical for endoscope reprocessing verification.

Chain effects of clean water: The Mills-Reincke phenomenon in early 20th-century Japan.

This study explores the validity of chain effects of clean water, which are known as the "Mills-Reincke phenomenon," in early 20-century Japan. Recent studies have reported that water purifications systems are responsible for huge contributions to human capital. Although some studies have investigated the instantaneous effects of water-supply systems in pre-war Japan, little is known about the chain effects of these systems. By analyzing city-level cause-specific mortality data from 1922 to 1940, we find that a decline in typhoid deaths by one per 1000 people decreased the risk of death due to non-waterborne diseases such as tuberculosis and pneumonia by 0.742-2.942 per 1000 people. Our finding suggests that the observed Mills-Reincke phenomenon could have resulted in the relatively rapid decline in the mortality rate in early 20-century Japan.

Investigation of the Physical, Chemical Characteristics and Microbial Contamination of the Indoor Swimming Pools

Objective: The aim of this study was to investigate the physical, chemical and microbiological contamination of indoor swimming pools. Methods: Pool water specimens were collected using a plastic polypropylene sterilized bottle. The physical and chemical qualities of the waters were analyzed in terms of temperature, turbidity, pH, and free residual chlorine, with the standard methods for the examination of water. Bacteriological (routine methods) and parasitological (molecular methods) tests were carried out on pools water. Results: The mean temperature, pH, and residual chlorine of the indoor pools were 31.2 °C, 7.6 and 1.5 mg/L, respectively. Turbidity was not observed in any of the pools. The pH and temperature values were in standard ranges in 92.3% and 15.4% of the waters of swimming pools, respectively. The prevalence rates of bacterial and amoebic contaminations of the water in the swimming pools were 53.8% and 46.2%, respectively. One pool (7.7%) was contaminated with both bacteria and amoeba. Streptococcus viridans, Staphylococcus epidermidis, Pseudomonas stutzeri, Cryptosporidium and Bacillus spp. were isolated from the pool waters. Conclusion: In this study, some microorganisms were identified from the water pools. Effective management of swimming pools and proper control of the physical, chemical and microbiological property of water pools can produce the healthy recreational activity.

Assessment of water, sanitation and hygiene in HCFs: which tool to follow?

Water, sanitation and hygiene (WASH) is important to improve and maintain the quality of health care services. Improving and managing WASH services require strong and consistent monitoring mechanisms to measure progress and direct efforts where needs are greatest. Although several tools are available to assess WASH in health care facilities (HCFs), there is always a dilemma among the program managers to select an appropriate tool for the assessment of WASH. Thus, it was aimed to perform a descriptive review of all available WASH assessment tools and assist in reaching a consensus for an optimal tool to assess WASH in HCFs. For this descriptive review, PubMed, ScopeMed and Google Scholar were used to search all available tools for the assessment of WASH. All the tools available online since 1991 till July 2018 were included in the review. Globally, nine different WASH assessment tools were retrieved. The majority of them have their self-limitations on the basis of 11 selected indicators and were examined in all the retrieved tools. There are variability and overlapping components within the specific tools. Very few survey instruments including human resource (HR), supply, budget, patient/staff satisfaction and documentation for appropriateness of WASH were found to be neglected. The majority of instruments were based on the subjective assessment of WASH validating with microbiological surveillance and photo documentation. The descriptive review suggests that various tools are available for the assessment of WASH but none of them seem to be complete with all indicators and to have consensus for the elements. Therefore, there is a need to develop a robust and comprehensive tool for the assessment of WASH in HCFs.

Variation in Trematode Infection in Snails Associated with Land Cover and Water Chemistry in the Central Illinois River Watershed.

Parasites can affect animal populations and communities in aquatic ecosystems. However, greater understanding is needed for the distributions and drivers of parasite infection levels in many areas. This study focuses on parasite prevalence (percent infected hosts) of an important class of parasites, trematodes, in 2 species of snail first intermediate hosts (Planorbella trivolvis and Physa sp.) in the Illinois River watershed, which has been impacted by human development. We hypothesized that trematode prevalence depends on local (e.g., water chemistry) and landscape (e.g., proximity to the Illinois River and land cover) factors. To test our hypotheses, we collected at least 20 individuals of 1 or both species of snails from 28 ponds within the watershed, and we made water-quality measurements and recorded habitat characteristics at each site. We then screened the snails for infections in the laboratory and identified the trematode cercariae that emerged based on morphological and molecular techniques. We found 5 cercariae morphotypes, including important parasites of wildlife, such as Echinostoma sp. and Ribeiroia ondatrae. Our results indicate that proximity to the Illinois River and open water or wetlands was positively associated with trematode prevalence in both snail species, whereas water chemistry (higher pH, lower calcium concentration, and lower specific conductance) was associated with increased prevalence, but only in Physa. Our findings offer increased understanding of potential environmental drivers underlying trematode distributions, with implications for wildlife health.

Charting and Evaluation of Real-Time Continuous Monitoring Water Bioburden.

Bioburden data of municipal water, generated continuously with an online water burden analyzer sampling every two seconds (2 s), were subjected to a statistical analysis for the purpose of charting, evaluating the monitoring process behavior, and understanding when to take action and maintain the process under a state of control. The biocounts were recorded with a commercial analyzer that employs the intrinsic fluorescence of microorganisms as a result of laser excitation in order to generate a laser-induced fluorescence (LIF) signal. The real-time and continuous counting of optical signals leads to a stream of positively autocorrelated data. These high-frequency data, when plotted on Shewhart control charts, are difficult to interpret and exhibit a high rate of false alarm signals because of the autocorrelation. This paper analyzes an example set of data of water biocounts of one single day with the purpose of removing or minimizing the autocorrelation using model-based and model-free methods. This analysis can be equally applied to environmental monitoring of inert particles and microbes in the air in controlled rooms. The skip sampling and time series model methods were shown to remove the autocorrelation. The author favors the model-free method of "batch means control charts" whereby a "batch" or a number of successive data points is averaged and plotted on a standard Shewhart chart. The magnitude of this number depends on the knowledge of the given process and the purpose of the process control chart. Subsequently, the "batch means control charts" were made more meaningful and practical by setting limits that were determined under relaxed constraints. The ultimate outcome is converting high-frequency data to low-frequency data plotted onto standard control charts with practical limits and fewer false alarms, charts that reveal more clearly the underlying behavior and trends of the monitoring process.LAY ABSTRACT: Bioburden data of municipal water, generated continuously with an online water analyzer sampling every 2 s, were subjected to a statistical analysis for the purpose of charting, evaluating the monitoring process behavior, and understanding when to take action and maintain the process under a state of control. This paper analyzes the data of biocounts of one single day with the purpose of removing or minimizing the autocorrelation using model-based and model-free methods. The skip sampling and time series model methods were shown to remove the autocorrelation. The author favors the model-free method of "batch means control charts" whereby a "batch" or a number of successive data points is averaged and plotted on a standard Shewhart chart. The magnitude of this number depends on the knowledge of the given process and the purpose of the process control chart. Subsequently, the "batch means control charts" were made more meaningful and practical by setting limits that were determined under relaxed constraints. The ultimate outcome is turning high-frequency data to low-frequency data plotted onto standard control charts with practical limits and fewer false alarms, charts that more easily reveal the trends of the monitoring process.

Thermal disinfection in hemodialysis using the A0 concept as dispenser. / Desinfección térmica en hemodiálisis usando el concepto A0 como dosificador.

Patients with chronic kidney disease in the hemodialysis program are exposed to large amounts of water, as this constitutes about 96% of the dialysis fluid. It is known that the use of better quality water decreases the state of chronic inflammation in dialysis patients. Disinfection as part of water treatment plays an important role in meeting the established quality standards; currently, heat disinfection is highly recommended, however its dose is not clearly established in the literature. The objective of this review is to know what is available in the literature on the dose of heat disinfection that should be used in hemodialysis and to present our experience with this method at a set dose of 12.000 A0.

What's in a name? Branding reclaimed water.

Reclaimed water is often presented as a cost-effective, reliable, and safe solution to increasingly common water shortages in the United States and across the globe, but studies have shown that consumers tend to object to the use of this water. Broad adoption of this technology will require consumer acceptance or at least tolerance of it, and studies have suggested that better branding could minimize consumers' concerns. In this study, we first test twenty-one potential branding names for reclaimed water using survey responses to identify the top-six most favored names. We then determine whether an opportunity for consumers to try reclaimed water can change their preferences. The results suggest that the common names for this water, such as Recycled, Reclaimed, Nontraditional, Treated Wastewater, and Reused, are the least appealing, as they all scored at the bottom. In contrast, names that invoke desirable characteristics of the water-Pure, Eco-Friendly, and Advanced Purified, were viewed significantly more favorable than the others. Having an opportunity to taste reclaimed water treated to a potable standard seems to clarify consumers' preferences by increasing the differences in favorability between the names. Based on these results, it appears that while there are a couple of appealing names, the most consistently preferred is Pure Water.

H2Oh No! The importance of reporting your water source in your in vivo microbiome studies.

Water is a fundamental part of any in vivo microbiome experiment however, it is also one of the most overlooked and underreported variables within the literature. Currently there is no established standard for drinking water quality set by the Canadian Council on Animal Care. Most water treatment methods focus on inhibiting bacterial growth within the water while prolonging the shelf-life of bottles once poured. When reviewing the literature, it is clear that some water treatment methods, such as water acidification, alter the gut microbiome of experimental animals resulting in dramatic differences in disease phenotype progression. Furthermore, The Jackson Lab, one of the world's leading animal vendors, provides acidified water to their in-house animals and is often cited in the literature as having a dramatically different gut microbiome than animals acquired from either Charles River or Taconic. While we recognize that it is impossible to standardize water across all animal facilities currently conducting microbiome research, we hope that by drawing attention to the issue in this commentary, researchers will consider water source as an experimental variable and report their own water sources to facilitate experimental reproducibility. Moreover, researchers should be cognisant of potential phenotypic differences observed between commercial animal vendors due to changes in the gut microbiome as a result of various sources of water used.

Carbon and blue water footprints of California sheep production.

While the environmental impacts of livestock production, such as greenhouse gas emissions and water usage, have been studied for a variety of US livestock production systems, the environmental impact of US sheep production is still unknown. A cradle-to-farm gate life cycle assessment (LCA) was conducted according to international standards (ISO 14040/44), analyzing the impacts of CS representing five different meat sheep production systems in California, and focusing on carbon footprint (carbon dioxide equivalents, CO2e) and irrigated water usage (metric ton, MT). This study is the first to look specifically at the carbon footprint of the California sheep industry and consider both wool and meat production across the diverse sheep production systems within California. This study also explicitly examined the carbon footprint of hair sheep as compared with wooled sheep production. Data were derived from producer interviews and literature values, and California-specific emission factors were used wherever possible. Flock outputs studied included market lamb meat, breeding stock, 2-d-old lambs, cull adult meat, and wool. Four different methane prediction models were examined, including the current IPCC tier 1 and 2 equations, and an additional sensitivity analysis was conducted to examine the effect of a fixed vs. flexible coefficient of gain (kg) in mature ewes on carbon footprint per ewe. Mass, economic, and protein mass allocation were used to examine the impact of allocation method on carbon footprint and water usage, while sensitivity analyses were used to examine the impact of ewe replacement rate (% of ewe flock per year) and lamb crop (lambs born per ewe bred) on carbon footprint per kilogram market lamb. The carbon footprint of market lamb production ranged from 13.9 to 30.6 kg CO2e/kg market lamb production on a mass basis, 10.4 to 18.1 kg CO2e/kg market lamb on an economic basis, and 6.6 to 10.1 kg CO2e/kg market lamb on a protein mass basis. Enteric methane (CH4) production was the largest single source of emissions for all CS, averaging 72% of total emissions. Emissions from feed production averaged 22% in total, primarily from manure emissions credited to feed. Whole-ranch water usage ranged from 2.1 to 44.8 MT/kg market lamb, almost entirely from feed production. Overall results were in agreement with those from meat-focused sheep systems in the United Kingdom as well as beef raised under similar conditions in California.