Attuning doped ZnO-based composites for an effective light-driven mineralization of pharmaceuticals via PMS activation.

Water treatment technologies need to go beyond the current control of organic contaminants and ensure access to potable water. However, existing methods are still costly and often inadequate. In this context, novel catalysts that improve the mineralization degree of a wider range of pharmaceuticals through more benign and less consuming methodologies are highly sought after. ZnO, especially when doped, is a well-known semiconductor that also excels in the photocatalytic removal of persistent organic pollutants. In this study, we investigated the effect of doping ZnO nanoparticles with either copper, gallium or indium on the structure, morphology, photophysical properties and photocatalytic mineralization of pharmaceuticals. Their architecture was further improved through the fabrication of composites, pairing the best performing doped ZnO with either BaFe12O19 or nickel nanoparticles. Their suitability was tested on a complex 60-ppm multi-pollutant solution (tetracycline, levofloxacin and lansoprazole). The activation strategy combined photocatalysis with peroxymonosulfate (PMS) as an environmentally friendly source of highly oxidative sulfate radicals. The alliance of doped ZnO and BaFe12O19 was particularly successful, resulting in magnetic microcroquette-shaped composites with excellent inter-component synergy. In fact, indium outperformed the other proposed metal dopants, exceeding 97% mineralization after 1 h and achieving complete elimination after 3 h. All composites excelled in terms of reusability, with no catalytic loss after 10 consecutive cycles and minimal leakage of metal ions, highlighting their applicability in water remediation.

Multi-project wafers for flexible thin-film electronics by independent foundries.

Flexible and large-area electronics rely on thin-film transistors (TFTs) to make displays1-3, large-area image sensors4-6, microprocessors7-11, wearable healthcare patches12-15, digital microfluidics16,17 and more. Although silicon-based complementary metal-oxide-semiconductor (CMOS) chips are manufactured using several dies on a single wafer and the multi-project wafer concept enables the aggregation of various CMOS chip designs within the same die, TFT fabrication is currently lacking a fully verified, universal design approach. This increases the cost and complexity of manufacturing TFT-based flexible electronics, slowing down their integration into more mature applications and limiting the design complexity achievable by foundries. Here we show a stable and high-yield TFT platform for the fabless manufacturing of two mainstream TFT technologies, wafer-based amorphous indium-gallium-zinc oxide and panel-based low-temperature polycrystalline silicon, two key TFT technologies applicable to flexible substrates. We have designed the iconic 6502 microprocessor in both technologies as a use case to demonstrate and expand the multi-project wafer approach. Enabling the foundry model for TFTs, as an analogy of silicon CMOS technologies, can accelerate the growth and development of applications and technologies based on these devices.

Mechanism of flavonols on detoxification, migration and transformation of indium in rhizosphere system.

Soil contamination by toxic heavy metal induces serious environmental hazards. In recent years, the use of indium (In) in semiconductor products has increased considerably and the release of In is inevitable, which will pose great risk to the ecosystem. The interaction between metal and plants which are the fundamental components of all ecosystems are an indispensable aspect of indium assessment and remediation. The role of flavonols, which is essential to plant resistance to In stress, remains largely unknown. FLS1 related lines of A. thaliana (Col, fls1-3 and OE) were exposed to In stress in soil and flavonols as root exudates were analyzed in exogenous application test. The accumulation and release of flavonols could be induced by In stress. However, flavonols exhibited different function in vivo and in vitro of plant. The basic function of flavonols was to affect root morphology via regulating auxin, but being intervened by In stress. The synthesis and accumulation of flavonols in vivo could activate the antioxidant system and the metal detoxification system to alleviate the toxic effects of In on plant. In addition, plants could make phone calls to rhizosphere microbes for help when exposed to In. Flavonols in vitro might act as the information transmission. Combination of endogenous and exogenous flavonols could affect the migration and transformation of In in soil-plant system via metal complexation and transportation pathway.

Potential-selective electrochemiluminescence of AgInS2/ZnS nanocrystals and its immunoassay application.

Potential-selective electrochemiluminescence (ECL) with tunable maximum-emission-potential ranging from 0.95 to 0.30 V is achieved using AgInS2/ZnS nanocrystals, which is promising in the design of multiplexed bioassay on commercialized ECL setups. The model system AgInS2/ZnS/N2H4 exhibits efficient ECL around 0.30 V and can be exploited for sensitive immunoassays with less electrochemical interference and crosstalk.

Organic photoelectrochemical transistor based on cascaded DNA network structure modulated ZnIn2S4/MXene Schottky junction for sensitive ATP detection.

Organic photoelectrochemical transistor (OPECT) biosensor is now appearing in perspective of public, which characterized by amplified the grating electrode potential by ion transport. In this study, the DNA network formed by the hybridization chain reaction (HCR) detects the target adenosine triphosphate (ATP) by adjusting the surface potential of the new heterojunction of ZnIn2S4/MXene. The formation of DNA network amplifies the detection signal of ATP. Significantly, OPECT biosensor could further amplify the signal, which calculated the gain achieved 103, which is consistent with the gain signal of the previously reported OPECT biosensor. Furthermore, the OPECT biosensor achieved a highly sensitivity detection of the target ATP, which the linear detection range is 0.03 pM-30 nM, and the detection limit is 0.03 pM, and illustrated a high selectivity to ATP. The proposed OPECT biosensor achieved signal amplification by adjusting the surface potential of ZnIn2S4/MXene through cascade DNA network, which provides a new direction for the detection of biomolecules.

Interferon gamma (IFN-γ)-sensitive TB aptasensor based on novel chitosan-indium nano-kesterite (χtCITS)-labeled DNA aptamer hairpin technology.

There has been increasing interest in the use of biosensors for diagnosis of infectious diseases such as tuberculosis (TB) due to their simplicity, affordability, and potential for point-of-care application. The incorporation of aptamer molecules and nanomaterials in biosensor fabrication explores the advantages of high-binding affinity and low immunogenicity of aptamers as well as the high surface-to-volume ratio of nanomaterials, for increased aptasensor performance. In this work, we employed a novel microwave-synthesized copper indium tin sulfide (CITS) substituted-kesterite nanomaterial, together with a natural biopolymer (chitosan), for signal amplification and increased loading of aptamer molecules. Study of the optical properties of CITS nanomaterials showed strong absorption in the UV region characteristic of kesterite semiconductor nanomaterials. X-ray diffraction analysis confirmed the presence of the kesterite phase with average crystallite size of 6.188 nm. Fabrication of interferon-gamma (IFN-γ) TB aptasensor with a chitosan-CITS nanocomposite (χtCITS) increased the aptasensor's electrochemical properties by 77.5 % and improved aptamer loading by 73.7 %. The aptasensor showed excellent sensitivity to IFN-γ concentrations with limit of detection of 6885 fg/mL (405 fM) and linear range of 850-17000 fg/mL (50 - 1000 fM). The aptasensor also exhibited excellent storage and electrochemical stability, with good selectivity towards IFN-γ and possible real sample application.

Mesoporous and Encapsulated In2O3/Ti3C2Tx Schottky Heterojunctions for Rapid and ppb-Level NO2 Detection at Room Temperature.

Rapid and ultrasensitive detection of toxic gases at room temperature is highly desired in health protection but presents grand challenges in the sensing materials reported so far. Here, we present a gas sensor based on novel zero dimensional (0D)/two dimensional (2D) indium oxide (In2O3)/titanium carbide (Ti3C2Tx) Schottky heterostructures with a high surface area and rich oxygen vacancies for parts per billion (ppb) level nitrogen dioxide (NO2) detection at room temperature. The In2O3/Ti3C2Tx gas sensor exhibits a fast response time (4 s), good response (193.45% to 250 ppb NO2), high selectivity, and excellent cycling stability. The rich surface oxygen vacancies play the role of active sites for the adsorption of NO2 molecules, and the Schottky junctions effectively adjust the charge-transfer behavior through the conduction tunnel in the sensing material. Furthermore, In2O3 nanoparticles almost fully cover the Ti3C2Tx nanosheets which can avoid the oxidation of Ti3C2Tx, thus contributing to the good cycling stability of the sensing materials. This work sheds light on the sensing mechanism of heterojunction nanostructures and provides an efficient pathway to construct high-performance gas sensors through the rational design of active sites.

A hybrid thermal-biological recycling route for efficient extraction of metals and metalloids from end-of-life liquid crystal displays (LCDs).

Waste liquid crystal displays (LCDs) are one of the most substantial and rapidly growing e-waste streams that contain a notable amount of critical, precious, and toxic elements. This study presented a novel thermal-biological hybrid method for resource recovery from waste LCDs. Through the design of a multistage thermal treatment process with the addition of optimized 20 wt% B2O3 to waste, the LCD's glass structure was separated into two interconnected phases, resulting in the transfer of metals from the LCD's glass phase to the B2O3 phase that can solubilize in the acid solution. Following the thermal treatment step, the biometabolites of Aspergillus niger were used for bioleaching of In, Sr, Al, and As from the obtained thermally treated product. The optimal bioleaching parameters were a pulp density of 10 g/L, temperature of 70 °C, and leaching time of 2 days, which led to the highest extraction of 82.6% Al, 70.8% As, 64.5% In, and 36.2% Sr from thermally treated LCD waste, representing a multifold increase in Al, As, and Sr extraction levels compared to untreated waste. This study demonstrated that the proposed hybrid method could successfully overcome waste complexities and ensure effective element extraction from discarded LCDs.

Efficient performance of InP and InP/ZnS quantum dots for photocatalytic degradation of toxic aquatic pollutants.

In recent years, the growing concern over the presence of toxic aquatic pollutants has prompted intensive research into effective and environmentally friendly remediation methods. Photocatalysis using semiconductor quantum dots (QDs) has developed as a promising technology for pollutant degradation. Among various QD materials, indium phosphide (InP) and its hybrid with zinc sulfide (ZnS) have gained considerable attention due to their unique optical and photocatalytic properties. Herein, InP and InP/ZnS QDs were employed for the removal of dyes (crystal violet, and congo red), polyaromatic hydrocarbons (pyrene, naphthalene, and phenanthrene), and pesticides (deltamethrin) in the presence of visible light. The degradation efficiencies of crystal violet (CV) and congo red (CR) were 74.54% and 88.12% with InP, and 84.53% and 91.78% with InP/ZnS, respectively, within 50 min of reaction. The InP/ZnS showed efficient performance for the removal of polyaromatic hydrocarbons (PAHs). For example, the removal percentage for naphthalene, phenanthrene, and pyrene was 99.8%, 99.6%, and 88.97% after the photocatalytic reaction. However, the removal percentage of InP/ZnS for pesticide deltamethrin was 90.2% after 90 min light irradiation. Additionally, advanced characterization techniques including UV-visible spectrophotometer (UV-Vis), photoluminescence (PL), X-ray diffractometer (XRD), energy-dispersive spectrometer (EDS) elemental mapping, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA) were used to analyze the crystal structure, morphology, and purity of the fabricated materials in detail. The particle size results obtained from TEM are in the range of 2.28-4.60 nm. Both materials (InP and InP/ZnS) exhibited a spherical morphology, displaying distinct lattice fringes. XRD results of InP depicted lattice planes (111), (220), and (311) in good agreement with cubic geometry. Furthermore, the addition of dopants was discovered to enhance the thermal stability of the fabricated material. In addition, QDs exhibited efficacy in the breakdown of PAHs. The analysis of their fragmentation suggests that the primary mechanism for PAHs degradation is the phthalic acid pathway.

Single- and two-photon-induced Förster resonance energy transfer in InP-mCherry bioconjugates.

Indium phosphide (InP) quantum dots (QDs) have recently garnered considerable interest in the design of bioprobes due to their non-toxic nature and excellent optical properties. Several attempts for the conjunction of InP QDs with various entities such as organic dyes and dye-labeled proteins have been reported, while that with fluorescent proteins remains largely uncharted. This study reports the development of a Förster resonance energy transfer pair comprising glutathione-capped InP/GaP/ZnS QDs [InP(G)] and the fluorescent protein mCherry. Glutathione on InP(G) undergoes effective bioconjugation with mCherry consisting of a hexahistidine tag, and the nonradiative energy transfer is investigated using steady-state and time-resolved measurements. Selective one-photon excitation of InP(G) in the presence of mCherry shows a decay of the emission of the QDs and a concomitant growth of acceptor emission. Time-resolved investigations prove the nonradiative transfer of energy between InP(G) and mCherry. Furthermore, the scope of two-photon-induced energy transfer between InP(G) and mCherry is investigated by exciting the donor in the optical transparency range. The two-photon absorption is confirmed by the quadratic relationship between the emission intensity and the excitation power. In general, near-infrared excitation provides a path for effective light penetration into the tissues and reduces the photodamage of the sample. The two-photon-induced energy transfer in such assemblies could set the stage for a wide range of biological and optoelectronic applications in the foreseeable future.

Microemulsion-Assisted Self-Assembly of Indium Porphyrin Photosensitizers with Enhanced Photodynamic Therapy.

Designing and constructing supramolecular photosensitizer nanosystems with highly efficient photodynamic therapy (PDT) is vital in the nanomedical field. Despite recent advances in forming well-defined superstructures, the relationship between molecular arrangement in nanostructures and photodynamic properties has rarely been involved, which is crucial for developing stable photosensitizers for highly efficient PDT. In this work, through a microemulsion-assisted self-assembly approach, indium porphyrin (InTPP) was used to fabricate a series of morphology-controlled self-assemblies, including nanorods, nanospheres, nanoplates, and nanoparticles. They possessed structure-dependent 1O2 generation efficiency. Compared with the other three nanostructures, InTPP nanorods featuring strong π-π stacking, J-aggregation, and high crystallinity proved to be much more efficient at singlet oxygen (1O2) production. Also, theoretical modeling and photophysical experiments verified that the intermolecular π-π stacking in the nanorods could cause a decreased singlet-triplet energy gap (ΔEST) compared with the monomer. This played a key role in enhancing intersystem crossing and facilitating 1O2 generation. Both in vitro and in vivo experiments demonstrated that the InTPP nanorods could trigger cell apoptosis and tumor ablation upon laser irradiation (635 nm, 0.1 W/cm2) and exhibited negligible dark toxicity and high phototoxicity. Thus, the supramolecular self-assembly strategy provides an avenue for designing high-performance photosensitizer nanosystems for photodynamic therapy and beyond.

New Stable Gallium(III) and Indium(III) Complexes with Thiosemicarbazone Ligands: A Biological Evaluation.

The aim of this work is to explore a new library of coordination compounds for medicinal applications. Gallium is known for its various applications in this field. Presently, indium is not particularly important in medicine, but it shares a lot of chemical traits with its above-mentioned lighter companion, gallium, and is also used in radio imaging. These metals are combined with thiosemicarbazones, ligating compounds increasingly known for their biological and pharmaceutical applications. In particular, the few ligands chosen to interact with these hard metal ions share the ideal affinity for a high charge density. Therefore, in this work we describe the synthesis and the characterization of the resulting coordination compounds. The yields of the reactions vary from a minimum of 21% to a maximum of 82%, using a fast and easy procedure. Nuclear Magnetic Resonance (NMR) and Infra Red (IR) spectroscopy, mass spectrometry, elemental analysis, and X-ray Diffraction (XRD) confirm the formation of stable compounds in all cases and a ligand-to-metal 2:1 stoichiometry with both cations. In addition, we further investigated their chemical and biological characteristics, via UV-visible titrations, stability tests, and cytotoxicity and antibiotic assays. The results confirm a strong stability in all explored conditions, which suggests that these compounds are more suitable for radio imaging applications rather than for antitumoral or antimicrobic ones.

Effects of topically administered 0.6% hyaluronic acid on the healing of labial frenectomy in conventional and 940-nm indium gallium arsenide phosphide (InGaAsP) diode laser techniques in pediatric patients: a randomized, placebo-controlled clinical study.

This study aimed to investigate the effects of 0.6% hyaluronic acid (HA) gel on the healing process and postoperative pain levels after diode laser-assisted labial frenectomy in pediatric patients. Ninety-six pediatric patients (females, 50 and males, 46) aged 8-14 years were randomly divided into four groups as follows: (1) conventional frenectomy with 0.6% topically administered HA (CFH, n = 24); (2) conventional frenectomy with placebo gel (CFP, n = 24); (3) frenectomy performed by diode laser with 0.6% topically administered HA (DLH, n = 24); and (4) frenectomy performed by diode laser with placebo gel (DLP, n = 24). HA application was continued for 1 week thrice daily after the frenectomy. Visual analog scale forms were collected from patients 1 week after the operation. In addition, the plaque index, gingival index, periodontal probing depth, and keratinized tissue width and thickness were recorded. This process was repeated 1 and 3 months after the first visit. The DLH group revealed significant differences in the probing depth, bleeding on probing, keratinized gingiva width, and attached gingiva width according to dual comparisons of the initial, first, and third-month values (p = 0.010, p = 0.007, p<0.001, and p = 0.001, respectively). Significant differences were observed between the CFP and CFH groups according to the initial and initial third-month values with regard to the bleeding on probing (p=0.019 and p = 0.019, respectively). The attached gingival thickness revealed significant differences between the CFP and CFH groups for the initial and initial-third-month comparisons (p = 0.005 and p = 0.007, respectively). The mean values of the initial and initial-third-month differences were significantly higher in the CFH group than those in the CFP group. HA- and laser-assisted labial frenectomies revealed better outcomes in terms of the probing depth, attached gingiva width, keratinized gingiva width, healing process, and postoperative comfort.

Changes in anticoagulation practice in subjects admitted with stroke associated with atrial fibrillation, following introduction of direct oral anticoagulants over 2013-2021.

BACKGROUND: The adoption of direct oral anticoagulants (DOACs) has changed practice in prevention of stroke in atrial fibrillation (AF). We used Irish data national data on stroke and anticoagulation therapy over 9 years to investigate changes in anticoagulation practice and potential consequences on stroke prevalence and thrombolysis. METHODS: AF, anticoagulation, thrombolysis, and stroke data from the Irish National Audit of Stroke (INAS) 2013-2021 were reviewed. The proportion of patients with ischemic stroke (IS) and intracerebral hemorrhage (IH) with known AF admitted on anticoagulation was determined. Effects on age distribution in the population and thrombolysis practice were assessed. RESULTS: AF data were available on 34,630 of 35,241 individuals (98.3%) included in INAS; median age was 74 years and 56% were male. AF was found in 10,016 (28.9%, 9059 IS, 957 IH). 6313 had known AF prior to stroke (63.1%). The proportion all total IS due to AF decreased by 15.3% (31.3%-26.5%, chi-square = 24.6, p < 0.0001). The proportion of IH did not change significantly (21.6%-20.2%, chi-square = 1.8, p = 0.18). Over the 9 years, 3875 (38.6%) of the subjects with AF were recorded as receiving anticoagulants at admission. In 2013, 4.4% of AF-associated strokes were admitted on a DOAC and 21.4% on warfarin; by 2021, 44.1% were receiving a DOAC and 6.2% warfarin. There was a strong inverse correlation between the proportion of anticoagulated stroke patients and the total proportion of AF-associated strokes over time (r = -0.82, p = 0.006). In contrast, no correlation was found between increasing DOAC usage and IH (r = 0.14, p = 0.71). Increased anticoagulation usage correlated with a reduction in patients ⩾ 80 years (r = -0.83, p = 0.006) and also correlated with a relative reduction of 30.1% in subjects thrombolysed <4 h from onset (r = -0.89, p = 0.001). CONCLUSION: DOACs have led to increased use of anticoagulation, but warfarin use fell by two-thirds. There has been a reduction in the proportion of AF-associated IS without a noticeable increase in IH. Increased anticoagulation correlated with reduced numbers of strokes in those >80 years and in the proportion of patients thrombolysed.

Comprehensive review of the global trends and future perspectives for recycling of decommissioned photovoltaic panels.

With the rapid deployment of renewable energy using photovoltaic (PV) panels, the sustainable management of decommissioned PV modules has become challenging. Decommissioned modules contain heavy metals, such as copper, cadmium, and lead, and hazardous polymer substances, such as ethylene vinyl acetate, polyethylene terephthalate, and polyvinylidene fluoride, which can pose a serious threat to the environment if disposed in a landfill. In addition, the low concentration value of critical metals, such as silver, indium, and tellurium, can also be lost. In this context, recycling decommissioned PV panels can be useful to resource recovery of valuable metals while lowering environmental stress. However, the lower share of PV modules and the prolonged life of 25-30 years compared to other waste volumes (e.g., electronic waste) hinder the progress in this direction. In contrast, reaching the end-of-life of the deployed first-generation PV panels is creating attraction toward the recycling of decommissioned modules. Henceforth, exploring the commercial viability of PV recycling necessitates a review of the methodologies that have been investigated on a laboratory scale and have the potential to be up-scaled. In this review, the recent trends in various PV-recycling steps, including frame disassembly, delamination, metal extraction, and recovery, are underlined while the associated problems are determined to suggest the required improvements in future technology. Furthermore, the environmental and economic feasibility of a few techniques are discussed to establish the viability of the recycling process. This review contributes to formulating PV waste management strategies and providing future research directions.

Interaction of gallium, indium, and vanadyl curcumin complexes with hen egg-white lysozyme (HEWL): Mechanistic aspects and evaluation of antiamyloidogenic activity.

Many proteins and peptides can aggregate into amyloid fibrils with high-ordered and cross-ß rich structure characteristics. Amyloid deposition is a common feature of neurodegenerative diseases called amyloidosis. Various natural polyphenolic compounds such as curcumin exhibited antiamyloidogenic activities, but less researches were focused on the metal complexes of these compounds. In this study, the inhibitory effects of gallium curcumin (Ga(cur)3), indium curcumin (In(cur)3), and vanadyl curcumin (VO(cur)2) on the amyloid fibrillation of hen egg white lysozyme (HEWL) have been investigated. Moreover, the details of binding interactions of these metal complexes with HEWL have been explored. The results of fluorescence quenching analyses revealed that In(cur)3 and VO(cur)2 have much higher binding affinities than Ga(cur)3 toward HEWL. The interactions of these metal complexes were accompanied by partial conformational changes in the tertiary structure of HEWL. The kinetic curves of the fibrillation process demonstrated that In(cur)3 and VO(cur)2 have higher inhibitory effects than Ga(cur)3 on the amyloid fibrillation of HEWL. The strength of binding to HEWL is completely in accordance with inhibitory activities of these metal complexes of curcumin.

Simple preparation of lignosulfonate stabilized eutectic gallium/indium liquid metal nanodroplets through ball milling process.

The combination of biomass and liquid metal (LM) makes the preparation process "greener" and application of LM composite materials more sustainable. Here we reported the solvent free preparation of lignosulfonate (LS) stabilized eutectic gallium/indium (EGaIn) LM nanodroplets through ball milling (BM), which was recognized to be efficient and environmentally-friendly alternatives to solution-based methods. By regulating the BM frequency and milling time, uniform LM nanodroplets with a size <200 nm can be achieved. Moreover, the surface of the EGaIn nanodroplets was covered by LS molecules, owing to the hydrogen bond formed between Ga2O3 and LS. Hydrophilic LS shell endowed the LS@EGaIn nanodroplets excellent colloidal stability in the aqueous media. The elongation at break and fracture strength of hydrogel with the addition of LS@EGaIn significantly improved with the addition of LS@EGaIn. Besides, the conductivity and excellent stress responsibility of the LS@EGaIn composite hydrogel illustrated its potential application as s a stress sensor, flexible wearable devices and other related applications. Moreover, it was predicted that LS can be replaced by other synthesized or biological macromolecules, and induced the formation of types of LM based composite materials through such a simple method.

"Antibacterial properties of nine indium(III) complexes of substituted pyrazoles/pyrazolate and the structural and solution characterization of the mer- and trans­indium(III) complexes of 4-Me-pzH".

Two indium(III) complexes of formula mer-[InIIICl3(4-Me-pzH)3] and trans-[InIIICl2(4-Me-pzH)4]Cl·(4-Me-pzH)2·(H2O) were isolated from the same reaction mixture and crystallographically characterized. The two complexes exist in dynamic equilibrium and their dynamic behavior was probed by variable temperature 1H NMR spectroscopy in the 202 to 296 K range. Powder X-ray diffraction of the batch confirmed existence of both complexes in a 1:2 ratio. Antibacterial properties of both new complexes, in addition to seven other previously published indium(III) complexes, were investigated against three Gram-positive and four Gram-negative pathogenic bacterial strains. The results showed potential for the development of indium(III)-based antipseudomonal and antituberculosis drugs, with mer-[InCl3(4-Ph-pzH)3] being especially effective.

Turning trash to treasure: Innovative use of exhausted desiccant waste supported zinc indium sulphide for sustainable photocatalytic abatement of tetracycline.

Employing an affordable and sustainable visible-light-driven system is crucial for organic pollutant abatement, in the field of photocatalysis. In the present investigation, a pioneering photocatalyst zinc indium sulphide, ZnIn2S4 (ZIS) supported on a silica gel matrix, SiO2 (SG) which is the leftover material after multiple rounds of dehumidification processes, was synthesized. The fabrication of the heterojunction facilitated enhancement in light absorption and charge separation efficiency. The photocatalytic performance was evaluated through the degradation of tetracycline (TC) under light irradiation. The nano-photocatalyst experienced detailed analysis using spectroscopic and microscopic methods. The ZIS/SG catalyst exhibited remarkable efficiency in degrading TC under visible light conditions, achieving a nearly 98-99% degradation. This performance surpassed the degradation rates of the original ZIS and SG catalysts by 3.6 and 4.45 times, respectively. Additionally, the catalyst was effectively used to control TC levels in real-time within pharmaceutical plant effluent, resulting in a degradation efficiency of 78.2%. With affordability, enhanced TC mineralization, and recyclability for up to six runs (efficiency ∼ 85%), the ZIS/SG photocatalyst exhibits desirable qualities of an ideal one. This innovative nano-photocatalyst introduces new possibilities for improving the process of photocatalytic decontamination of tenacious emerging pollutants by providing satisfactory reusability and stability.

Novel Ag-modified vanadate nanosheets for determination of small organic molecules with laser desorption ionization mass spectrometry.

Laser desorption ionization mass spectrometry (LDI-MS) aroused intensive concerns for the merits of label-free and high-throughput analysis. Here, we designed a silver nanoparticles (AgNP)-modified indium vanadate nanosheets with doping samarium (AgNP@InVO4:Sm) nanosheets. The developed AgNP@InVO4:Sm nanosheets (AIVON) were synthesized based on the microemulsion-mediated solvothermal method and ultraviolet-assisted in situ formation of AgNP, then for the first time applied as a matrix in LDI-MS analysis. With the advantages including enhanced MS signal, little matrix-related background, high reproducibility, and good salt tolerance, AIVON exhibited much better prospect than non-modified indium vanadate nanosheets with doping samarium (IVON) and traditional organic matrix, thus allowing sensitive MS detection for a wide range of low-molecular-weight (LMW) molecules. Moreover, by coupling with headspace sampling thin-film microextraction (TFME), a kind of representative pollutant chlorophenols were identified and quantified via AIVON-assisted LDI-MS in environmental and biological samples. Volatile LMW pollutants could be preconcentrated after TFME, hence a sensitive and rapid assay with negligible sample matrix effect was realized by using AIVON-assisted LDI-MS. It is anticipated that this novel nano-matrix AIVON and the proposed TFME coupling detection strategy were of competitive merits for LDI-MS analysis in the fields of environment, biomedicine, and agriculture.