Dynamic correction of dual-energy x-ray absorptiometry images improves chain speed prediction of lamb composition in abattoirs.

A prototype, on-line Dual Energy X-ray Absorptiometer (DXA) has shown high precision of the prediction of carcass composition for the purpose of improved sheep meat grading in the Australian lamb supply chain, albeit with small inaccuracies over time. These inaccuracies were present across hours, and more significantly across days, which were unacceptable for any accreditation of this device as an objective carcass measurement tool in Australia. This inaccuracy demanded the creation of a novel image-processing algorithm for the prototype DXA. This DXA was tested for repeatability of predictions of lamb carcass composition over minutes, hours, and days, using two developed image processing algorithms. There was high immediate repeatability for both algorithms when predicting lean muscle % in 40 lamb carcasses, with a maximum CV of 0.65% over five repeated scans. There was a decrease in the CV of the prediction of lean muscle % of 30 lambs scanned three times over a 48-h period from 5.93 to 1.19% when the superior algorithm was used. The inaccuracies of lean muscle % predictions were associated with increases in the unattenuated space pixel values in DXA images. Improvements of the current algorithm are required to demonstrate repeatability over time for the purpose of accreditation within the Australian sheep meat industry, and for possible expansion of this technology into international supply chains.

Synthetic phantoms enable calibration between abattoir based dual energy X-ray absorptiometers used for prediction of lamb carcass composition.

Dual energy x-ray absorptiometry (DXA) devices were installed at two Australian abattoirs to predict computed tomography (CT) determined fat % and lean % of lamb carcasses. This study tested three algorithms developed for these devices, termed ß1, ß2 and ß3, and assessed their accuracy and precision in predicting CT composition. Algorithm ß3 included the use of a plastic phantom calibration block scanned by both DXA devices to adjust prediction equations, resulting in superior accuracy to the algorithms without phantom calibration (ß1 and ß2). When compared to the gold-standard CT composition, the bias of the DXA predictions was lowest when using algorithm ß3 at the two sites (-1.17%, -0.49% for fat %, 0.11%, -0.37% for lean %). The difference of DXA composition predictions between sites was lowest when using algorithm ß3, which demonstrated between site differences of 0.59 CT fat %, and 0.46 CT lean%. In contrast, algorithm ß1 and ß2 produced differences of 23.7% and 30.8% for CT fat, and 17.3% and 21.9% for CT lean between the two DXA devices. There was a small difference of 0.78% between the fat predictions of the first DXA image compared to the second DXA image for each carcass. The precision of predictions improved slightly using algorithm ß3. This work demonstrates that the in-line DXA systems can produce comparable results across sites.

Different methionine to cysteine supplementation ratios altered bone quality of broilers with or without Eimeria challenge assessed by dual energy X-ray absorptiometry and microtomography.

Despite the acknowledged significance of nutrition in bone development, effects of methionine (Met) and cysteine (Cys) on bone quality remain under-researched, particularly during Eimeria challenge. We investigated the effects of different supplemental Met to Cys ratios (MCR) on bone quality of broilers under Eimeria challenge. A total of 720 fourteen-day old Cobb500 broilers were allocated into a 5 × 2 factorial arrangement. Five diets with Met and Cys supplemented at MCR of 100:0, 75:25, 50:50, 25:75, and 0:100 were fed to the birds with or without Eimeria challenge. Body composition was measured by dual energy x-ray absorptiometry, and the femur bone characteristics were assessed by microtomography. Data were analyzed by two-way ANOVA and orthogonal polynomial contrast. The results reaffirmed the detrimental effects of Eimeria challenge on bone quality. On 9 d post inoculation (DPI), significant interaction effects were found for whole body bone mineral content (BMC), lean tissue weight, and body weight (P < 0.05); in the nonchallenged group (NCG), these parameters linearly decreased as MCR decreased (P < 0.05). In the challenged group (CG), body weight and lean tissue weight were unaffected by MCR, and BMC linearly increased as MCR decreased (P < 0.05). For the cortical bone of femoral metaphysis on 6 DPI, bone mineral density (BMD) linearly increased as MCR decreased (P < 0.05). Bone volume to tissue volume ratio (BV/TV) in the CG linearly increased as MCR decreased (P < 0.05). On 9 DPI, BMC and TV linearly increased as MCR decreased (P < 0.05) in the NCG. BMD and BV/TV changed quadratically as MCR decreased (P < 0.05). For the trabecular bone of femoral metaphysis on 9 DPI, BV/TV, and trabecular number linearly increased as MCR decreased (P < 0.05) in the NCG. For the femoral diaphysis, BV, TV, BMC on 6 DPI, and BMD on 9 DPI linearly increased as MCR decreased (P < 0.05). In conclusion, this study showed that both Eimeria challenge and varying supplemental MCR could influence bone quality of broilers.

Quantification of hardware effects of an on-line Dual Energy X-ray Absorptiometry scanner when predicting lamb carcass composition.

An on-line Dual Energy X-ray Absorptiometry (DXA) scanner's tissue composition prediction precision and accuracy was tested across the entire height of the unit's detector, and the hardware was assessed for robustness by measuring X-ray photon intensity throughout production days. There was good precision when predicting the tissue composition of 5 different lamb fat and lean muscle mixtures across 3 different thicknesses (R2 = 0.93 to 0.98, RMSE = 3.18% to 5.83%), however was less precise at the greatest thickness of 200 mm (R2 = 0.59, RMSE = 11.4%). There was no significant difference in the prediction of tissue composition at 8 of the 9 detector positions, however the position at the perpendicular of the X-ray photon beam was significantly different, with a fat prediction error of -4%, although no lamb carcass is detected in this position during normal production. A significant upwards drift in X-ray photon intensity was found over the course of production, especially immediately after restarting the DXA scanner following a period of inactivity. This upwards drift may affect tissue composition predictions over the span of a production day if uncorrected.

Measuring body composition in dogs using bioelectrical impedance spectroscopy.

Assessment of body composition is an essential aspect of veterinary canine care, particularly as prevalence of overweight and obesity in dogs is increasing. Few quantitative objective methods for body composition measurement are available for routine clinical use. Bioelectrical impedance analysis is widely used in human medicine and nutritional assessment and although it has shown promise in production animals it has not yet been adopted for companion animals. The present study validated bioimpedance spectroscopy (BIS) against the reference method of dual-energy X-ray absorptiometry. Resistivity coefficients for use in BIS were determined: ρe = 444.8 and ρi = 1477.8 ohm.cm and used to predict fat-free mass (FFM) in a cohort of 35 mixed breed dogs. Overall, FFM was predicted to within 3.5% of reference values. At an individual level, FFM was predicted within 2 standard deviations (95% confidence) of 10%. BIS provides an objective quantitative alternative to the widely used semi-quantitative body condition scoring. In addition, BIS provides estimates of body water volumes (total, extra-and intracellular), information that can be useful in fluid management. BIS is inexpensive, and simple to perform but does require brief (<5 min) sedation of the animal.

Dual-energy X-ray absorptiometry: an effective approach for predicting broiler chicken body composition.

Two trials were carried out to develop and validate linear regression equations for body composition prediction using Dual-energy X-ray absorptiometry (DEXA). In Trial 1, 300 Cobb500 male chickens raised from 1 to 42 d of age were scanned in DEXA to estimate total weight, fat mass, soft lean tissue (SLT) mass, bone mineral content (BMC), and fat percentage. DEXA estimates were compared to body ash, crude fat, SLT (sum of protein and water) and scale body weight. The dataset was split, with 70% used for prediction equations development and 30% for testing, and the 5k-fold cross-validation analysis was used to optimize the equations. The R2, mean absolute error (MAE), and root-mean-squared error (RMSE) were used as precision and accuracy indicators. A negative correlation (ρ = -0.27) was observed for ash content, while no correlation was observed for protein content (P > 0.05). Predictive linear equations were developed to assess broiler weight (R2 = 0.999, MAE = 25.12, RMSE = 38.99), fat mass (R2 = 0.981, MAE = 13.87, RMSE = 21.28), ash mass (R2 = 0.956, MAE = 3.98, RMSE = 5.61), SLT mass (R2 = 0.997, MAE = 35.73, RMSE = 52.45), water mass (R2 = 0.997, MAE = 29.56, RMSE = 43.94), protein mass (R2 = 0.989, MAE = 12.94, RMSE = 19.05), fat content (R2 = 0.855, MAE = 0.81, RMSE = 1.05), SLT content (R2 = 0.658, MAE = 1.01, RMSE = 1.28), and water content (R2 = 0.678, MAE = 0.99, RMSE = 1.27). All equations passed the test. In Trial 2, 395 Cobb500 male chickens were raised from 1 to 42 d of age and used for validation of prediction equations. The equations developed for weight, fat mass, ash mass, SLT mass, water mass, and protein mass were validated. In conclusion, DEXA was found to be an effective approach for measuring the body composition of broilers when using predictive equations validated in this study for estimate calibration.

Estimation of carcass chemical composition in beef-on-dairy cattle using dual-energy X-ray absorptiometry (DXA) scans of cold half-carcass or 11th rib cut.

The aim of the present study was to estimate the chemical composition (water, lipid, protein, mineral, and energy contents) of carcasses measured postmortem using dual-energy X-ray absorptiometry (DXA) scans of cold half-carcass or 11th rib cut. One hundred and twenty beef-on-dairy (dam: Swiss Brown, sire: Angus, Limousin, or Simmental) bulls (n = 66), heifers (n = 42), and steers (n = 12) were included in the study. The reference carcass composition measured after grinding, homogenization, and chemical analyses was estimated from DXA variables using simple or multiple linear regressions with model training on 70% (n = 84) and validation on 30% (n = 36) of the observations. In the validation step, the estimates of water and protein masses from the half-carcass (R2 = 0.998 and 0.997; root mean square error of prediction [RMSEP], 1.0 and 0.5 kg, respectively) and 11th rib DXA scans (R2 = 0.997 and 0.996; RMSEP, 1.5 and 0.5 kg, respectively) were precise. Lipid mass was estimated precisely from the half-carcass DXA scan (R2 = 0.990; RMSEP = 1.0 kg) with a slightly lower precision from the 11th rib DXA scan (R2 = 0.968; RMSEP = 1.7 kg). Mineral mass was estimated from half-carcass (R²â€…= 0.975 and RMSEP = 0.3 kg) and 11th rib DXA scans (R2 = 0.947 and RMSEP = 0.4 kg). For the energy content, the R2 values ranged from 0.989 (11th rib DXA scan) to 0.996 (half-carcass DXA scan), and the RMSEP ranged from 36 (half-carcass) to 55 MJ (11th rib). The proportions of water, lipids, and energy in the carcasses were also precisely estimated (R2 ≥ 0.882) using either the half-carcass (RMSEP ≤ 1.0%) or 11th rib-cut DXA scans (RMSEP ≤ 1.3%). Precision was lower for the protein and mineral proportions (R2 ≤ 0.794, RMSEP ≤ 0.5%). The cattle category (sex and breed of sire) effect was observed only in some estimative models for proportions from the 11th rib cut. In conclusion, DXA imaging of either a cold half-carcass or 11th rib cut is a precise method for estimating the chemical composition of carcasses from beef-on-dairy cattle.

Assessment of the water, lipid, protein, mineral, and energy contents of beef carcass allows for an understanding of the bovine growth physiology and is key to determining the carcass's commercial value at the slaughterhouse. Direct measurement of the carcass chemical composition requires postmortem grinding and homogenization of a half-carcass to perform chemical analyses. This reference method is expensive, time-consuming, and destructive of edible meat. The aim of the present study was to develop an alternative and nondestructive method to determine carcass chemical composition based on image scans obtained using dual-energy X-ray absorptiometry (DXA). Equations were calibrated to estimate the carcass composition based on the DXA scans of a whole half-carcass or a single-rib cut in an accurate, precise, fast, and reproducible way. These were established for seven types of beef-on-dairy cattle of different sexes and breeds of sire, which are among the most commonly used in specialized beef-on-dairy fattening production systems worldwide.

BONE MINERAL DENSITY DETERMINED BY DUAL-ENERGY X-RAY ABSORPTIOMETRY METHOD FOR EGYPTIAN FRUIT BATS (ROUSETTUS AEGYPTIACUS) IN HUMAN CARE.

Egyptian fruit bats (Rousettus aegyptiacus) are commonly held within zoos and research facilities. Despite this popularity, there have been no publications regarding normal bone density or bone mineral concentration and few publications regarding the normal dietary requirements of calcium, phosphorus, and vitamin D (25-hydrox-vitamin D3 [25(OH)D3]) for the species. A clinical investigation into frequent fractures in a zoo population of 23 adult male Egyptian fruit bats used dual-energy X-ray absorptiometry (DXA) to evaluate bone mineral density (BMD) and bone mineral content (BMC) prior to and after dietary adjustment of calcium and phosphorus. This study documents BMD, BMC, serum trace minerals, and serum levels of 25(OH)D3 within this population and includes postmortem bone density and bone ash from a subset of bats that died during the study period. A handheld point-of-care analyzer was utilized to assess ionized calcium and electrolytes (sodium, potassium, chloride, total CO2), glucose, blood urea nitrogen, and creatinine at each DXA time point to contribute to published reference ranges for this species. This study identified a significant (P < 0.001) increase in BMC over 15 mon (4.71-8.26 g) following additional calcium and phosphorus supplementation in the diet. The BMD also trended toward a significant increase (0.124-0.274 g/cm2, P < 0.053). Additional studies documenting normal bone density that include both sexes and possibly free-ranging bats consuming a natural diet are recommended to determine normal values for R. aegyptiacus.

Appendicular skeletal muscle mass assessment in dogs: a scoping literature review.

BACKGROUND: Monitoring changes in appendicular skeletal muscle mass is frequently used as a surrogate marker for limb function. The primary objective of this study was to review scientific information related to the assessment of appendicular skeletal muscle mass in dogs. The secondary objective was to develop practical recommendations for serial evaluation of muscle mass. METHODS: A scoping review was conducted with a systematic search of PubMed, Web of Science, CAB abstract, and Cochrane from inception to June 2021. The following modalities were included in the search: limb circumference, diagnostic ultrasound, computed tomography, magnetic resonance imaging, and dual-energy x-ray absorptiometry. RESULTS: A total of 62 articles that measured appendicular skeletal muscle mass in dogs were identified. Limb circumference (55 articles) was the most commonly used modality. Its reliability was investigated in five studies. Several factors, including measuring tape type, body position, joint angles, and the presence of hair coat, were reported as variables that can affect measurements. Diagnostic ultrasound (five articles) was validated in three articles, but there is scarce information about observer reliability and variables affecting the measurement. Computed tomography (four articles) and magnetic resonance imaging (one article) have been used to validate other modalities at a single time point rather than as a clinical tool for serial muscle mass monitoring. Dual-energy x-ray absorptiometry (two articles) has been used to quantify specific skeletal muscle mass but was mainly used to evaluate body composition in dogs. CONCLUSION: Limb circumference and ultrasound are likely the main modalities that will continue to be used for serial muscle mass measurement in the clinical setting unless a new technology is developed. The reliability of limb circumference is questionable. Several key factors, including measuring tape type, body position, joint angles, and coat clipping, need to be controlled to improve the reliability of limb circumference measurements. Ultrasound may provide a reasonable alternative, but further studies are required to evaluate the reliability of this modality and identify factors that influence ultrasound measurements.

Relationship between energy intake and growth performance and body composition in pigs selected for low backfat thickness.

Genetic selection of pigs over recent decades has sought to reduce carcass fat content to meet consumer demands for lean meat in many countries (e.g., Australia). Due to the impacts of genetic changes, it is unknown whether the carcass fat measures are still responsive to energy intake. Thus, the present experiment aimed to quantify the relationship between tissue composition and dietary energy intake in finisher pigs selected for low carcass backfat. Intact male and female pigs (n = 56 for each sex; Primegro Genetics, Corowa, NSW, Australia) were fed seven different amounts of an amino acid adequate wheat-based diet containing 14.3 MJ digestible energy (DE)/kg to provide the following daily DE intakes- 25.8, 29.0, 32.6, 35.3, 38.5, 41.5, and 44.2 (ad libitum) MJ DE/d for males, and 25.8, 28.9, 32.0, 35.6, 38.3, 40.9, and 44.5 (ad libitum) MJ DE/d for females between 60 and 108 kg live weight. Body composition of anesthetized pigs was measured using the dual energy X-ray absorptiometry (DXA) method when individual pigs reached 108 kg, and protein, fat, and ash deposition rates were calculated. Pigs were slaughtered on the second day post-DXA scan for carcass backfat measurement. The results showed that the carcass backfat thickness (standardized at 83.7 kg carcass) increased by 0.125 mm for every MJ increase in daily DE intake in male pigs (P = 0.004; R2 = 0.130), but carcass backfat of female pigs (standardized at 85.1 kg carcass) was not responsive to daily DE intake. Whole-body fat composition and fat deposition rate increased linearly (both P < 0.01) in male pigs but quadratically (both P < 0.01) in female pigs in response to DE intake. Every MJ increase of daily DE intake increased the rate of daily protein deposition by 3.8 g in intact male pigs (P < 0.001; R2 = 0.781) and by 2.5 g in female pigs (P < 0.001; R2 = 0.643). In conclusion, the selection for low backfat thickness over the last two decades has altered the response of fat deposition and backfat thickness to energy intake, particularly in female pigs. Despite this change, the linear relationship between DE intake and protein deposition rate was maintained in these modern genetics.

Accuracy of predicting chemical body composition of growing pigs using dual-energy X-ray absorptiometry.

Studies in animal science assessing nutrient and energy efficiency or determining nutrient requirements benefit from gathering exact measurements of body composition or body nutrient contents. Those are acquired by standardized dissection or by grinding the body followed by wet chemical analysis, respectively. The two methods do not result in the same type of information, but both are destructive. Harnessing human medical imaging techniques for animal science can enable repeated measurements of individuals over time and reduce the number of individuals required for research. Among imaging techniques, dual-energy X-ray absorptiometry (DXA) is particularly promising. However, the measurements obtained with DXA do not perfectly match dissections or chemical analyses, requiring the adjustment of the DXA via calibration equations. Several calibration regressions have been published, but comparative studies of those regression equations and whether they are applicable to different data sets are pending. Thus, it is currently not clear whether existing regression equations can be directly used to convert DXA measurements into chemical values or whether each individual DXA device will require its own calibration. Our study builds prediction equations that relate body composition to the content of single nutrients in growing entire male pigs (BW range 20-100 kg) as determined by both DXA and chemical analyses, with R2 ranging between 0.89 for ash and 0.99 for water and CP. Moreover, we show that the chemical composition of the empty body can be satisfactorily determined by DXA scans of carcasses, with the prediction error ranging between 4.3% for CP and 12.6% for ash. Finally, we compare existing prediction equations for pigs of a similar range of BWs with the equations derived from our DXA measurements and evaluate their fit with our chemical analysis data. We found that existing equations for absolute contents that were built using the same DXA beam technology predicted our data more precisely than equations based on different technologies and percentages of fat and lean mass. This indicates that the creation of generic regression equations that yield reliable estimates of body composition in pigs of different growth stages, sexes and genetic breeds could be achievable in the near future. DXA may be a promising tool for high-throughput phenotyping for genetic studies, because it efficiently measures body composition in a large number and wide array of animals.

The potential for dual energy X-ray absorptiometry to predict lamb eating quality.

Data were obtained from 120 lambs which were slaughtered, scanned using dual energy X-ray absorptiometry (DEXA) and underwent eating quality assessment. DEXA images were used to determine R values, reflecting atomic mass, to predict carcass lean %. Additionally, bone regions (humerus, lumbar, femur and "all carcass bone") were isolated from images to determine bone specific R values (DEXA R Mean and SDev). Prediction of overall liking of cuts across the carcass (scored between 0 and 100) using lean % and bone DEXA was variable. Loin grill overall liking demonstrated significant associations with lumbar DEXA R Mean and SDev, decreasing by 8.6 and 7.6 units across the increasing range of these bone DEXA measures. This association is somewhat independent of carcass lean % and intramuscular fat % of the loin. Given the association of DEXA with eating quality, there are potential benefits for the lamb industry with respect to carcass sorting and marketing during routine processing and DEXA scanning.

Dual energy X-ray absorptiometry predicts lamb carcass composition at abattoir chain speed with high repeatability across varying processing factors.

An on-line Dual Energy X-ray Absorptiometry (DXA) scanner was used in an Australian abattoir to predict computed tomography (CT) determined composition % of fat, lean muscle and bone in lamb carcasses at chain speed. This study assessed the effect of spray-chilling on these estimates, as well as their repeatability over a 10-min period, and over a 72 h period. There was no prediction bias between the 15 spray-chilled and 15 non-spray-chilled carcasses. When repeat DEXA scans were undertaken across a 10-min period, there was a high level of repeatability for the prediction of CT Fat %. When repeat scans were conducted at 6 time points across a 72 h period the precision of the DXA prediction of CT Fat % of 30 carcasses remained high (R2 = 0.94, RMSEP = 1.20%), although small biases existed between time points (P < 0.01). These biases were minimised when the DXA scanner had been operational prior to experimentation, suggesting a 'warm-up' effect.

Using dual energy X-ray absorptiometry to estimate commercial cut weights at abattoir chain-speed.

This experiment assessed the ability of an on-line dual energy x-ray absorptiometer (DEXA) installed at a commercial abattoir to determine commercial cut weights in lamb carcases at abattoir chain-speed. 200 lamb carcases were scanned using a DEXA that was trained to predict the computed tomography determined proportions of fat, lean, and bone. Models were then trained using hot carcase weight and, DEXA fat% value or GR tissue depth to predict cut weight. Results from validation tests of DEXA models demonstrated excellent precision for predicting cut weight, in most cases describing more than 85% of the variation, and RMSE values that represented between 5 and 13% of the average weight of each cut. For most cuts these weight predictions were superior to those informed by GR tissue depth. This precision was maintained upon validation. Additional analyses utilised pixel information from the fore, saddle, and hind sections of DEXA images. This further enhanced the predictive power of cut weight models.

A prototype rapid dual energy X-ray absorptiometry (DEXA) system can predict the CT composition of beef carcases.

The development of a novel rapid dual energy X-ray absorptiometry (DEXA) system provides the opportunity to improve measurement of beef carcase composition. A prototype rapid DEXA system was built in a shipping container to scan 51 beef carcases selected for a wide range in weight and fatness. One side of each carcase was spray chilled and the other conventionally chilled overnight before being quartered for DEXA scanning and then being cut into 16 pieces for CT scanning to determine carcase composition. Spray chilling did not impact DEXA prediction of CT composition, with the DEXA system describing 89%, 95%, and 87% of the variation in beef carcase CT lean %, fat % and bone %, with a root mean square error of prediction of 2.31 lean %, 2.15 fat %, and 1.12 bone % units. These results demonstrate that the novel rapid DEXA system has excellent capacity to predict CT composition in beef carcases.

Abnormal bone mineralization in a puppy fed an imbalanced raw meat homemade diet diagnosed and monitored using dual-energy X-ray absorptiometry.

A 4-month-old male Old English Sheepdog was presented for evaluation of a raw meat-based homemade diet after a 1-month history of progressive lameness. Marked dietary deficiencies were detected, which included calcium, phosphorus and vitamin D. Hypovitaminosis D and hypocalcaemia were diagnosed by serum analysis. Evidence of severe diffuse osteopenia was noted on survey radiographs. Dual-energy X-ray absorptiometry (DEXA) was used to quantify bone mineral content and density and compare to published reference ranges. The puppy's initial bone mineralization was markedly subnormal, with bone mineral density 66% lower than expected, and bone mineral content 40% lower than expected. Subsequent DEXA scans were performed at intervals during the puppy's recovery to document the rate of bone re-mineralization and guide therapeutic recommendations. Marked improvement was achieved within 4 months through exercise control and feeding of a diet appropriately formulated for large breed puppy growth and development. This report reinforces the necessity of thorough dietary history and highlights the potential for malnutrition in pets fed homemade and raw meat-based diets. Use of DEXA has rarely been reported in clinical cases, yet can be a valuable tool for diagnosing and monitoring cases with abnormal bone mineralization. Further studies using DEXA to track bone mineralization in healthy puppies are encouraged to develop a more robust reference range of bone mineralization in growing dogs of varying sizes, weights and ages.

Dual energy X-ray absorptiometry precisely and accurately predicts lamb carcass composition at abattoir chain speed across a range of phenotypic and genotypic variables.

Dual energy X-ray absorptiometry (DEXA) is an imaging modality that has been used to predict the computed tomography (CT)-determined carcass composition of multiple species, including sheep and pigs, with minimal inaccuracies, using medical grade DEXA scanners. An online DEXA scanner in an Australian abattoir has shown that a high level of precision can be achieved when predicting lamb carcass composition in real time. This study investigated the accuracy of that same online DEXA when predicting fat and lean percentages as determined by CT over a wide range of phenotypic and genotypic variables across 454 lambs over 6 kill groups and contrasted these results against the current Australian industry standard of grade-rule (GR) measurements to grade carcasses. Lamb carcasses were DEXA scanned and then CT scanned to determine CT Fat % and CT Lean %. All phenotypic traits and genotypic information, including Australian Sheep Breeding Values, were recorded for each carcass. Residuals of the DEXA predicted CT Fat % and Lean %, and the actual CT Fat % and Lean % were calculated and tested against all phenotypic and genotypic variables. Excellent overall precision was recorded when predicting CT Fat % (R2 = 0.91, RMSE = 1.19%). Small biases present for sire breed, sire type, dam breed, hot carcass weight and c-site eye muscle area could be explained by a regression paradox; however, biases among kill group (-0.73% to 1.01% for CT Fat %, -1.48% to 0.76% for CT Lean %) and the Merino sire type (0.36% for CT Fat %, -0.73% for CT Lean %) could not be explained by this effect. Over the large range of phenotypic and genotypic variation, there was excellent precision when predicting CT Fat % and CT Lean % by an online DEXA, with only minor biases, showing superiority to the existing Australian standard of GR measurements.

Alleged predisposing dietary factors fail to increase the incidence of osteochondrosis-like lesions in growing pigs at 14 and 24 wk of age.

Early lesions of osteochondrosis (OC) are exhibited by regions of cartilage retention along the growth plate and articular cartilage. Progression of OC lesions may impair locomotion and necessitate euthanasia in adherence to animal welfare guides. Little is known about the role of nutrition in the initiation and early stages of OC. However, dietary components are commonly implicated as predisposing factors. In this study, diets were altered as an attempt to induce early stage OC lesions under controlled conditions. At 8 wk of age, 96 crossbred gilts (body weight [BW] = 17.4 ± 0.18 kg) were randomly assigned to one of four corn-soybean meal-based diets (four pens per diet, six pigs per pen) to assess diet effects on the number and volume of OC lesions in the distal femur. Diets included a non-pelleted control diet (Ctl); Ctl plus 20% glucose (Glc); the Ctl with increased concentrations of lysine, Ca, and P (+CaP); and the +CaP diet in a pelleted form (PEL). Femurs were collected from pigs euthanized at either 14-wk (Wk 14) or 24-wk (Wk 14) of age for assessments of OC lesions. Based on a mixed model analysis with pen as the experimental unit, dietary treatments did not affect final BW (129.3 ± 3.8 kg) or average daily gain (ADG) (1.00 ± 0.03 kg/d) over the trial. As expected, pigs fed PEL and Glc diets were more efficient (P < 0.05) in feed conversion compared with Ctl and +CaP. Using femurs as the experimental unit at Wk 14 (collected from two of the six pigs per pen), bone mineral content, determined by dual-energy x-ray absorptiometry scans, was greater (P < 0.05) in pigs fed +CaP and PEL than Ctl or Glc diets; however, only +CaP group differed (P < 0.05) at Wk 24 (collected from four pigs per pen). Computed tomography (CT) scans of femurs were reconstructed as three-dimensional images to allow detection of the number, volume, and surface area of lesions in distal growth plates. At Wk 14, pigs fed Ctl had fewer number of lesions (P < 0.05); however, no differences were detected among dietary treatments in lesion volume or lesion surface area. Pigs had fewer lesions at Wk 24 than Wk 14; however, differences were not detected among dietary treatments. At Wk 24, pigs fed Ctl diets had the greatest lesion volume among dietary treatments (P < 0.05). In conclusion, none of the pigs exhibited symptoms of lameness regardless of dietary treatment or OC lesion traits. Diet modifications due to pelleting or inclusion of rapidly digestible ingredients, such as glucose, did not increase prevalence or size of OC lesions. Image analysis of CT scans was a reliable method to quantify the number, size, and location of OC lesions.

Technological Advances in Diagnostic Imaging in Exotic Pet Medicine.

Diagnostic imaging relies on interpretation of interactions between the body tissue and various energies, such as x-rays, ultrasound, and magnetic or nuclear energies, to differentiate normal from abnormal tissues. Major technological improvements regarding emission and detection of the energetic waves, as well as reconstruction and interpretation of the images, have occurred. These advances made possible visualization of smaller structures, quantitative evaluation of functional processes, and development of unique imaging-guided procedures. This article reviews the technological advances that allowed development of cone beam computed tomography, dual-energy x-ray absorptiometry, and contrast-enhanced ultrasonography, which all could have applications in exotic pet medicine.

EVALUATION OF THE BONE MINERAL DENSITY OF ASIAN ELEPHANTS (ELEPHAS MAXIMUS) VIA DUAL-ENERGY X-RAY IMAGING OF TAILS.

Musculoskeletal problems are one of the top five causes of disease in elephants. However, recent blood chemistry analysis is the only routine protocol for bone mineral status evaluation, with no assessment method currently available for the direct measurement of elephant bone mineral density (BMD). This work applied the the dual-energy X-ray technique (DXA) technique for bone density assessment. The elephant's tail was chosen for the analysis to avoid the radiation harm. Twelve live Asian elephants (Elephas maximus) comprising eight males and four females with ages in the range of 4-77 yr were investigated. The BMD was calculated based on radiographic images acquired using the DXA technique carried out at 40 kVp 2 mAs and 50 kVp 2 mAs. Blood serum analysis of total calcium (Ca), phosphorus (Phos) and alkaline phosphatase (ALP) content was conducted in parallel with the physical examination to correlate age and BMD. Analyses produced an overall mean BMD value in the range of 0.54-1.39 g/cm2, with that of the males higher than that of the females. The BMD was found to be negatively correlated with age, Ca, and Phos, but not with ALP. In summary, the BMD analysis of an elephant's tail might be used with blood serum Ca and Phos to predict the overall bone mineral status of the animal.