Fractures in Patients With Diabetes Mellitus: Findings From a 20-year Registry at a Single Level 1 Trauma Center.

INTRODUCTION: Diabetes mellitus (DM) is a risk factor of infection. Although DM has been associated with worse functional outcomes after acetabular fracture, literature regarding the effect of DM on surgical site infection and other early complications is lacking. METHODS: A 20-year registry from a level 1 trauma center was queried to identify 134 patients with DM and 345 nondiabetic patients with acetabular fractures. RESULTS: The diabetic patient population was older (57.2 versus 43.2; P < 0.001) and had higher average body mass index (33.6 versus 29.5; P < 0.001). Eighty-three patients with DM and 270 nondiabetics were treated surgically (62% versus 78%; P < 0.001). Diabetic patients who were younger (54.6 versus 61.4; P = 0.01) with fewer comorbidities (1.7 versus 2.2; P = 0.04) were more frequently managed surgically. On univariate analysis, patients with DM more commonly developed any early infection (28.4% versus 21%; P = 0.049) but were no more likely to develop surgical site infection, or other postoperative complications. Older patient age, length of stay, baseline pulmonary disease, and concurrent abdominal injury were independent predictors of postoperative infection other than surgical site infection. Diabetics that developed infection had more comorbidities (2.4 versus 1.5; P < 0.001) and higher Injury Severity Score (24.1 versus 15.8; P = 0.003), and were more frequently insulin-dependent (72.7% versus 41%; P = 0.01). DISCUSSION: Independent of management strategy, diabetic patients were more likely to develop an infection after acetabular fracture. Insulin dependence was associated with postoperative infection on univariate analysis. Optimal selection of surgical candidates among patients with DM may limit postoperative infections.

Quadrilateral plate classification program of acetabular fractures based on three-column classification: a three-dimensional fracture mapping study.

BACKGROUND: A new classification system for acetabular fractures has been proposed in recent years, which is called the 3-column classification. However, this system does not provide information regarding quadrilateral plate fractures. To address this issue, we utilized three-dimensional (3D) fracture line mapping and heat map to analyze the link between the 3-column classification and quadrilateral plate fractures. METHODS: We collected CT scan data from 177 patients who had been diagnosed with acetabular fractures. Additionally, we utilized a CT scan of a healthy adult to generate a standard acetabular model. We utilized the collected CT data of the fracture to create a 3D model and subsequently reduced it. We then matched each acetabular fracture model with the standard acetabular model and mapped all of the fracture lines to the standard model. 3D fracture lines and heat maps were created by overlapping all fracture lines. Fracture characteristics were then summarized using these maps. RESULTS: This study analyzed a total of 221 acetabular fractures. The most frequently observed fracture type, based on the three-column classification, was A1.2, which corresponds to fractures of the anterior column. In contrast, the least common type of fracture was A4, which represents fractures of the central wall. It was noted that quadrilateral plate fractures were frequently observed in fractures classified as type B and C according to the three-column classification. CONCLUSIONS: Among the three-column classification, the QLP fractures are commonly observed in type B and C. It is important to carefully identify these fractures during the diagnostic process. Therefore, based on the three-column classification, we have amalgamated quadrilateral plate fractures and formulated a classification program for acetabular fractures.

Surgical treatment outcomes of acetabular posterior wall and posterior column fractures using 3D printing technology and individualized custom-made metal plates: a retrospective study.

BACKGROUND: Fractures involving the posterior acetabulum with its rich vascular and neural supply present challenges in trauma orthopedics. This study evaluates the effectiveness of 3D printing technology with the use of custom-made metal plates in the treatment of posterior wall and column acetabular fractures. METHODS: A retrospective analysis included 31 patients undergoing surgical fixation for posterior wall and column fractures of the acetabulum (16 in the 3D printing group, utilizing 3D printing for a 1:1 pelvic model and custom-made plates based on preoperative simulation; 15 in the traditional group, using conventional methods). Surgical and instrument operation times, intraoperative fluoroscopy frequency, intraoperative blood loss, fracture reduction quality, fracture healing time, preoperative and 12-month postoperative pain scores (Numeric Rating Scale, NRS), hip joint function at 6 and 12 months (Harris scores), and complications were compared. RESULTS: The surgical and instrument operation times were significantly shorter in the 3D printing group (p < 0.001). The 3D printing group exhibited significantly lower intraoperative fluoroscopy frequency and blood loss (p = 0.001 and p < 0.001, respectively). No significant differences were observed between the two groups in terms of fracture reduction quality, fracture healing time, preoperative pain scores (NRS scores), and 6-month hip joint function (Harris scores) (p > 0.05). However, at 12 months, hip joint function and pain scores were significantly better in the 3D printing group (p < 0.05). Although the incidence of complications was lower in the 3D printing group (18.8% vs. 33.3%), the difference did not reach statistical significance (p = 0.433). CONCLUSION: Combining 3D printing with individualized custom-made metal plates for acetabular posterior wall and column fractures reduces surgery and instrument time, minimizes intraoperative procedures and blood loss, enhancing long-term hip joint function recovery. CLINICAL TRIAL REGISTRATION: 12/04/2023;Trial Registration No. ChiCTR2300070438; http://www.chictr.org.cn .

Comparison of 2 different fixation techniques of comminuted acetabular quadrilateral surface fractures using square bracket-shaped tubular plate or interfragmentary screws in addition to supra/infrapectineal plate fixation: An observational study.

The management of comminuted quadrilateral fractures remains challenging, and treatment options are constantly evolving. The purpose of the present study was to examine the outcomes of 2 different fixation techniques in the management of comminuted quadrilateral fractures. Twenty-two patients with comminuted quadrilateral acetabular fractures were surgically treated with interfragmentary lag screw (group 1) and square bracket-shaped tubular (SBST) plate technique (group 2), in addition to suprapectineal and infrapectineal pelvic reconstruction plate fixation between January 2016 and July 2019 at our clinic. 2 years follow-up control data of each group were compared in terms of radiological and functional results, and complications. According to the functional score comparison, the mean Merle d'Aubigne Postel scoring system (MAP) score was 15.2/15.6 (P = .632), and the mean Harris hip scoring (HHS) system score was 74.65/77.3 (P = .664) in groups 1 and 2, respectively. Radiological comparison was performed according to matta radiological criteria (MRC), and 2 excellent, 6 good, 2 poor, 4 excellent, 4 good, and 4 poor radiological results were observed in groups 1 and 2, respectively. intraarticular screw penetration was detected in 3 patients in group 1, while there was no articular implant penetration in group 2 (P = .001). We believe that satisfactory results can be obtained with the SBST plate technique, offering functional and clinical outcomes that are similar to those of the interfragmentary screw technique. The SBST plate technique is superior in terms of avoiding intraarticular screw penetration and related revision surgery.

Robotic-assisted plate fixation of the anterior acetabulum - clinical description of a new technique.

INTRODUCTION: We present a detailed procedure for the robotic-assisted plate osteosynthesis of an anterior acetabular fracture. The purpose of this work was to describe a robotic-assisted minimally invasive technique as a possible method for reducing complications, pain, and hospitalization. Another goal was to present technical recommendations and to assess potential pitfalls and problems of the new surgical approach. METHODS: Surgery was performed in an interdisciplinary setting by an experienced orthopedic surgeon and a urologist. The DaVinci System with standard instruments was used. Reduction was achieved through indirect traction of a pin that was introduced into the femoral neck and direct manipulation via the plate. The plate position and fixation were achieved through 7 additional minimally invasive incisions. RESULTS: The technique has multiple advantages, such as no detachment of the rectus abdominal muscle, a small skin incision, and minimal blood loss. Furthermore, this approach might lower the incidence of hernia formation, infection, and postoperative pain. DISCUSSION: We see the presented technique as a demanding yet progressive and innovative surgical method for treating acetabular fractures with indications for anterior plate fixation. TRIAL REGISTRATION: The study was approved by the local institutional review board (Nr. 248/18).

Anterior approaches in acetabular fractures: a true learning curve analysis.

Today, acetabular surgeons in training have to learn ilioinguinal and anterior intrapelvic approaches (AIP). The aim of this study was to describe the 5-years learning curve of a surgeon. Objective was to assess clinical and radiological results; and to assess factors which could influence this learning curve. Between November 2015 and May 2020, patients with an acetabular fracture operated by the surgeon during the 5-years learning curve with an anterior approach were included in this single-center retrospective study based on a prospective database. Epidemiological, operative, clinical, radiological and complications data's were collected. To assess learning-curve effect the series was divided into two groups: first 2.5-years and last 2-years. Subgroup analysis were performed according to the surgical approach, to the reduction quality and the prognostic factors. In total, 46 patients were included, 23 in period 1 and 23 in period 2. 16 patients (35%) had ilioinguinal approach and 30 patients (65%) had modified Stoppa-Cole approach. At mean follow-up of 24 months, 38 patients (83%) were reviewed. Anatomical reduction (< 1 mm) was achieved in 28 patients (60.9%) with a 9% rate of perioperative complications and 37% rate of post-operative complications. In conclusion, this study gives a realistic overview of the learning curve of anterior approaches in acetabular fractures surgery. Our results should encourage surgeons, while keeping in mind how much this surgery can be challenging, with high rate of complications and difficulty to obtain a systematic anatomical reduction.

Sleep quality and psychological health in patients with pelvic and acetabulum fractures: a cross-sectional study.

BACKGROUND AND OBJECTIVES: It is known that difficulty sleeping after a fracture can have negative effects on both mental and physical health and may prolong the recovery process. The objective of this study is to explore how sleep quality and psychological health are linked in patients with pelvic and acetabulum fractures. METHODS: A study was conducted on 265 patients between 2018 and 2022 who had suffered pelvic and acetabulum fractures. The study examined various factors, including age, gender, cause of injury, post-operative complications, and injury severity. The study employed ordinal logistic regression to examine the relationship between various pelvic fractures and seven subscales of the Majeed Pelvic Score (MPS), as well as the Sleep Disorder Questionnaire (SDQ) and Beck Depression Inventory (BDI). The study focused on the postoperative outcome one year after surgery, and each patient was assessed at the one-year mark after surgical intervention. Additionally, the study evaluated the functional outcome, sleep quality, and psychological disorders of the patients. RESULTS: From 2018 to 2022, a total of 216 patients suffered from pelvic and acetabulum fractures. Among them, 6.6% experienced borderline clinical depression, and 45.2% reported mild mood disturbances. Anxiety was found to be mild to moderate in 46% of Tile C and posterior acetabulum wall fracture patients. About 24.8% of patients reported insomnia, while 23.1% reported sleep movement disorders. However, no significant correlation was found between fracture types and sleep disorders. The mean Majeed pelvic score (MPS) was 89.68. CONCLUSIONS: Patients with pelvic and acetabular fractures typically experience functional improvement, but may also be at increased risk for insomnia and sleep movement disorders, particularly for certain types of fractures. Psychological well-being varies between fracture groups, with signs of borderline clinical depression observed in some cases. However, anxiety levels do not appear to be significantly correlated with pelvic and acetabular fractures.

Incidence and clinical outcome of lateral femoral cutaneous nerve injury after periacetabular osteotomy.

Aims: Lateral femoral cutaneous nerve (LFCN) injury is a complication after periacetabular osteo-tomy (PAO) using an anterior approach, which might adversely affect the outcome. However, no prospective study has assessed the incidence and severity of this injury and its effect on the clinical outcomes over a period of time for longer than one year after PAO. The aim of this study was to assess the incidence and severity of the symptoms of LFCN injury for ≥ three years after PAO and report its effect on clinical outcomes. Methods: A total of 40 hips in 40 consecutive patients who underwent PAO between May 2016 and July 2018 were included in the study, as further follow-up of the same patients from a previous study. We prospectively evaluated the incidence, severity, and area of symptoms following LFCN injury. We also recorded the clinical scores at one year and ≥ three years postoperatively using the 36-Item Short Form Health Survey (SF-36) and Japanese Orthopaedic Association Hip Disease Evaluation Questionnaire (JHEQ) scores. Results: A total of 20 patients (50%) had symptoms of a LFCN injury at one year after PAO. At ≥ three years postoperatively, the symptoms had completely resolved in seven of these patients and 13 (33%) had persistent symptoms. The severity and area of symptoms did not significantly differ between one and ≥ three years postoperatively. The JHEQ showed significant differences in the patient satisfaction and mental scores between those with and those without sypmtoms of LFCN injury at ≥ three years postoperatively, while there was no significant difference in the mean SF-36 scores. Conclusion: The incidence of LFCN injury after PAO using an anterior approach is high. The outcome of PAO, ≥ three years postoperatively, is poorer in patients with persistent symptoms from a perioperative LFCN injury, in that patient satisfaction and mental health scores are adversely affected.

No benefit of direct anterior over posterolateral approach in total hip arthroplasty using dual-mobility acetabular component for femoral neck fracture.

Aims: Dual-mobility acetabular components (DMCs) have improved total hip arthroplasty (THA) stability in femoral neck fractures (FNFs). In osteoarthritis, the direct anterior approach (DAA) has been promoted for improving early functional results compared with the posterolateral approach (PLA). The aim of this study was to compare these two approaches in FNF using DMC-THA. Methods: A prospective continuous cohort study was conducted on patients undergoing operation for FNF using DMC by DAA or PLA. Functional outcome was evaluated using the Harris Hip Score (HHS) and Parker score at three months and one year. Perioperative complications were recorded, and radiological component positioning evaluated. Results: There were 50 patients in the DAA group and 54 in the PLA group. The mean HHS was 85.5 (SD 8.8) for the DAA group and 81.8 (SD 11.9) for the PLA group (p = 0.064). In all, 35 patients in the DAA group and 40 in the PLA group returned to their pre-fracture Parker score (p = 0.641) in both groups. No statistically significant differences between groups were found at one year regarding these two scores (p = 0.062 and p = 0.723, respectively). The DAA was associated with more intraoperative complications (p = 0.013). There was one dislocation in each group, and four revisions for DAA and one for PLA, but this difference was not statistically significant. There were also no significant differences regarding blood loss, length of stay, or operating time. Conclusion: In DMC-THA for FNF, DAA did not achieve better functional results than PLA, either at three months or at one year. Moreover, DAA presented an increased risk of intra-operative complications.

Revision Surgery Risk After Open Reduction and Internal Fixation Versus Acute Total Hip Arthroplasty in Geriatric Acetabular Fractures: A Nationwide Study.

BACKGROUND: The aging population has contributed to a rising incidence of acetabular fractures in older patients, yet current evidence guiding surgical treatment is limited by small sample sizes. This study used a nationwide database to investigate outcomes in older patients undergoing open reduction and internal fixation (ORIF) versus acute total hip arthroplasty (THA). METHODS: The PearlDiver database was queried for patients aged 60 years and older with an acute acetabular fracture who underwent ORIF or acute THA (2010 to 2021). ORIF patients were matched 1:1 to THA patients based on age, sex, US region, insurance plan, and Charlson Comorbidity Index score. Patients with less than 2 years of follow-up were excluded. The primary outcome was revision surgery. RESULTS: Of 120,032 patients with an acetabular fracture, 3,768 (3.1%) underwent surgical treatment: 1,482 (39.3%) THA and 2,286 (60.7%) ORIF. Mean age was 71.0 ± 6.51 years. Mean follow-up duration was 5.2 ± 2.1 years. THA patients were slightly older (72.4 versus 70.2 years), had higher Charlson Comorbidity Index scores (3.3 versus 2.7), and had a higher percentage of female patients (62.5% versus 32.2%). After matching, 962 ORIF and 962 THA patients were included. ORIF patients had longer LOS (10.7 versus 8.1 days). ORIF patients were less likely to experience joint infections and periprosthetic fractures, but more likely to experience transfusions. The overall revision surgery rate within 10 years was 14.8% in the ORIF cohort and 6.2% in the THA cohort. In the ORIF cohort, 13.5% of patients had a delayed conversion to THA. CONCLUSIONS: In this large national database, acute with or without internal fixation for geriatric acetabular fractures was associated with lower rates of revision surgery within 10 years when compared with a matched cohort undergoing ORIF. ORIF was associated with increased LOS, increased transfusion risk, and lower risk of joint infection and periprosthetic fracture. LEVEL OF EVIDENCE: III.

A New Computed Tomography-Based Measure that Provides Insight Into Hip Stability in Patients With Posterior Wall Acetabular Fractures.

OBJECTIVES: To describe the technique and results of a new sagittal plane computed tomography (CT)-based angular measure for predicting stability after posterior wall acetabular fractures (PWF). DESIGN: Retrospective review. SETTING: Academic Level II trauma center. PATIENT SELECTION CRITERIA: Fifty-eight consecutive patients with PWF (AO/OTA class 62A.1), 98% were high-energy injuries. INTERVENTION: A new sagittal CT measure of PWF based on the angle subtending the joint center, cranial and caudal fracture exits. OUTCOME MEASURES AND COMPARISONS: Hip incongruity or dislocation demonstrated using gold standard test, examination under anesthesia (EUA), or instability on static images. Prediction of hip instability using a sagittal CT angular measure based on cranial and caudal fracture exits was compared with previous axial CT measures suggestive of increased risk for instability including posterior wall size >50%, and those with cranial exit within 5.0 mm of the acetabular dome. RESULTS: There were 32 operative and 26 nonoperatively treated fractures. Thirty fractures were determined to be unstable, and 28 were stable after EUA. Measurements of >70 degrees using the sagittal CT angular measure predicted instability in 28 of 28 patients, and ≤70 degrees predicted stability in 30 of 30 patients (sensitivity 100% and specificity 100%). Prevalence of EUA confirmed instability for subgroups with PWF based on prior axial CT measures were as follows: ≥50% wall involvement (11/16; sensitivity 67% and specificity 60%; 95% CI, 45%-89%/45%-75%), fracture within 5.0 mm of dome (5/18; sensitivity 86% and specificity 73%; 95% CI, 71%-100%/59%-87%), fracture within 5.0 mm of dome and ≥50% involvement (1/9; sensitivity 89% and specificity 56%; 95% CI, 69%-100%/24%-88%). CONCLUSIONS: In a sample of 58 mostly high energy posterior wall fractures all having had an EUA, a new sagittal angular CT measurement of ≤70 degrees predicted hip stability and >70 degrees predicted instability with 100% sensitivity and specificity. LEVEL OF EVIDENCE: Diagnostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Does local fat thickness correlate with post-operative infection in open reduction and internal fixation of acetabulum fractures?

PURPOSE: Obesity is an epidemic which increases risk of many surgical procedures. Previous studies in spine and hip arthroplasty have shown that fat thickness measured on preoperative imaging may be as or more reliable in assessment of risk of post-operative infection and/or wound complications than body mass index (BMI). We hypothesized that, similarly, increased local fat thickness at the surgical site is a predictor of wound complication in acetabulum fracture surgery. METHODS: Patients who underwent open reduction and internal fixation (ORIF) of an acetabulum fracture through a Kocher-Langenbeck (K-L) approach at a single institution from 2013 to 2020 were identified. Pre-operative CT scans were used to measure fat thickness from the skin to the greater trochanter in line with the surgical approach. Post-operative infections and wound complications were recorded and associated with fat thickness and BMI. RESULTS: 238 patients met inclusion criteria. 12 patients had either infection or a wound complication (5.0%). There was no significant association with BMI or preoperative fat thickness on post-operative infection or wound complication (p-value 0.73 and 0.86). CONCLUSIONS: There is no statistically significant association of post-operative infection or wound complications in patients with increased soft tissue thickness or increased BMI. ORIF of acetabulum fractures through a K-L approach can be performed safely in patients with large subcutaneous fat thickness and high BMI with low risk of infection or wound complications.

Optimizing percutaneous reduction and fixation with guidewire modification in pelvic and acetabular fractures: surgical technique and case series.

BACKGROUND: Minimally invasive percutaneous screw fixation for pelvic ring and acetabular fractures has become increasingly popular due to its numerous benefits. However, the precise placement of the screw remains a critical challenge, necessitating a modification of the current techniques. This paper introduces a refined technique employing a modified guidewire to enhance the precision and efficiency of percutaneous fixation in pelvic and acetabular fractures. METHODS: This study details the surgical techniques implemented for correcting guidewire misdirection in percutaneous screw fixation and includes a retrospective analysis of patients treated with this modified approach over a three-year period. RESULTS: In this study, 25 patients with pelvic ring and acetabular fractures underwent percutaneous screw fixation. The cohort, predominantly male (23 out of 25), had an average age of 38 years. The majority of injuries were due to traffic accidents (18 out of 25). Types of injuries included pelvic ring (6 cases), acetabular fractures (8 cases), and combined injuries (11 cases). Various screw types, including antegrade and retrograde anterior column screws, retrograde posterior column screws, and lateral compression screws, were used, tailored to each case. Over an average follow-up of 18 months, there were no additional procedures or complications, such as neurovascular injury or hardware failure, indicating successful outcomes in all cases. CONCLUSIONS: This study introduces a simple yet effective method to address guidewire misdirection during percutaneous fixation for pelvic and acetabular fractures, offering enhanced precision and potentially better patient outcomes. Further research with a larger patient cohort is required for a more comprehensive understanding of its efficacy compared to traditional methods. LEVEL OF EVIDENCE: IV. Therapeutic Study (Surgical technique and Cases-series).

Acetabular "Fleck" Sign: Outcomes of Surgical Repair.

BACKGROUND: Traumatic, posterior hip dislocations in the pediatric population are typically managed by closed reduction to achieve a concentric hip joint. The presence of an acetabular "fleck" sign, despite concentric reduction, has been shown to signify significant hip pathology. The purpose of this study was to evaluate the outcomes of open labral repair through a surgical hip dislocation (SHD) in a consecutive series of patients with an acetabular "fleck" sign associated with a traumatic hip dislocation/subluxation. METHODS: A retrospective review of patients between 2008 and 2022 who presented to a single, level 1 pediatric trauma center with a traumatic posterior hip dislocation/subluxation was performed. Patients were included if they had an acetabular "fleck" sign on advanced imaging and underwent open labral repair through SHD. Medical records were reviewed for sex, age, laterality, mechanism of injury (MOI), and associated orthopaedic injuries. The modified Harris hip score (mHHS) was utilized as the primary clinical outcomes measure. Patients were assessed for the presence of heterotopic ossification (HO) and complications, including implant issues, infection, avascular necrosis (AVN), and post-traumatic dysplasia. RESULTS: Twenty-nine patients (23 male, average age: 13.0±2.7 y; range: 5.2 to 17.3) were identified. Eighteen injuries were sports related, 9 caused by motor vehicle accidents, and 1 pedestrian struck. All patients were found to have an acetabular "fleck" sign on CT (26 patients) or MRI (5 patients). Associated injuries included: femoral head fracture (n=6), pelvic ring injury (n=3), ipsilateral femur fracture (n=2), and ipsilateral PCL avulsion (n=1). At the latest follow-up (2.2±1.4 y), all patients had returned to preinjury activity/sport. Three patients developed asymptomatic, grade 1 HO in the greater trochanter region. There was no incidence of AVN. One patient developed post-traumatic acetabular dysplasia due to early triradiate closure. mHHS scores showed excellent outcomes (n=21, 94.9±7.4, range: 81 to 100.1). CONCLUSIONS: The acetabular "fleck" sign indicates a consistent pattern of osteochondral avulsion of the posterior/superior labrum. Restoring native hip anatomy and stability is likely to improve outcomes. SHD with open labral repair in these patients produces excellent clinical outcomes, with no reported cases of AVN. LEVEL OF EVIDENCE: Level IV-therapeutic.

[Virtual preoperative planning and 3D-printed templates for pre-contoured plates in treatment of acetabular posterior wall fractures].

OBJECTIVE: To evaluate the feasibility and accuracy of virtual preoperative planning and 3D-printed templates for pre-contoured plates for the treatment of posterior wall fractures of the acetabulum. METHODS: A retrospective analysis of 29 patients with posterior acetabular wall fractures treated between August 2017 and March 2021 were divided into 2 groups based on whether to use preoperative virtual planning and 3D printed template. In 3D-printing group, there were 14 patients, including 10 males and 4 females； aged from 21 to 53 years old；CT-based virtual surgical planning was done using Mimics and 3-Matic software and 3D-printed templates for pre-contoured plates were adopted. In conventional group, there were 15 patients, including 10 males and 5 females；aged from 19 to 55 years old；conventional method of intra-operative contouring to adapt the plate to the fracture region was adopted. Blood loss, surgical time, radiographic quality of reduction, and hip function were compared between groups. RESULTS: The difference in operation time and intraoperative blood loss was significant（P<0.05）. Twenty-three patients were followed up from 12 to 30 months, and the fractures in both groups healed with a healing time of 3 to 6 months. At the last follow-up, the Merle d'Aubign-Postel score of the 3D printed group was lower than that of the conventional group（P<0.05）, with no significant differences in walking ability, hip mobility and total score（P>0.05）. In 3D printing group, 6 cases were excellent, 5 cases were good, 3 cases were fair；in conventional group, 5 cases were excellent, 5 cases were good, 4 cases were fair, 1 case was worse；no significant difference between two groups（P>0.05）. CONCLUSION: Virtual preoperative planning and 3D-printed templates for pre-contoured plates can reduce operative time and the blood loss of surgery, improve the quality of reduction. This method is efficient, accurate and reliable to treat acetabular posterior wall fractures.

Efficient hip joint distraction using the AO large femoral distractor in treating acetabular fractures associated with marginal impaction and intraarticular incarcerated fragments.

PURPOSE: The results after acetabular fracture are primarily related to the quality of articular reduction. Using the AO large femoral distractor, incarcerated fragments can be easily removed, and marginally impacted fragments can be elevated under direct visualization without further re-dislocating the joint. The current study aimed to evaluate our early results of using the AO large femoral distractor as an assisting tool during ORIF of acetabular fractures associated with marginal impaction or intraarticular incarcerated fragments. METHODS: Eighteen patients were included in this retrospective case series study diagnosed with an acetabular fracture associated with either marginal impaction injury or an intraarticular incarcerated fragment. On a usual operative table, all patients were operated upon in a prone position through the Kocher Langenbeck approach. The AO large femoral distractor was used to facilitate hip joint distraction. Postoperative fracture reduction and joint clearance were assessed in the immediate postoperative CT scans. RESULTS: The average age of the patients was 30 ± 8.2 years; 13 (72.2%) were males. All cases had a posterior wall fracture, and it was associated with transverse fractures, posterior column fractures, and T-type fractures in five (27.8%), two (11.1%), and one (5.6%) patients, respectively. Intraarticular incarcerated fragments were present in 13 (72.2%) cases and marginal impaction in five (27.8%). Fracture reduction measured on the postoperative CT scans showed an anatomical reduction in 14 (77.8%) patients, imperfect in four (22.2%), and complete clearance of the hip joint of any incarcerated fragments. CONCLUSION: The use of the AO large femoral distractor is a reliable and reproducible technique that can be applied to assist in the removal of incarcerated intraarticular fragments and to ease the reduction of marginally impacted injuries associated with acetabular fractures.

Comparison of patient demographics and patient-specific risk factors for readmissions following open reduction and internal fixation for acetabular fractures.

PURPOSE: Acetabular fractures are highly complex injuries often resulting from high-energy trauma. The gold standard treatment for these injuries has become open reduction internal fixation (ORIF). The purpose of this study is to further this understanding and investigate how (1) patient demographics and (2) patient-specific risk factors affect 90-day readmission rates. METHODS: A retrospective, nationwide query of private insurance database from January 1st, 2010 to October 31st, 2020 was performed using ICD-9, ICD-10, and CPT codes. Patients who underwent acetabular ORIF and were readmitted within 90 days following index procedure were included, patients who were not readmitted served as controls. Patients were divided by demographics and specific risk factors associated with readmission. RESULTS: The query yielded a total of 3942 patients. Age and sex were found to be non-significant contributing risk factors to 90-day readmissions. Data also showed that statistically significant comorbidities included arrhythmia, cerebrovascular disease, coagulopathy, fluid and electrolyte abnormalities, and pathologic weight loss. CONCLUSION: This study illustrated how several patient-specific risk factors may contribute to increased 90-day readmission risk following acetabular ORIF. A heightened awareness of these comorbidities in patients requiring acetabular ORIF is required to improve patient outcomes and minimize rates of readmission. Further investigation is needed to improve patient outcomes, and increase awareness of potential post-operative complications in these higher-risk patient populations.

[Progress on treatment of acetabular quadrilateral plate injury].

Acetabular quadrilateral plate injury has become a hot spot and focus in the field of orthopaedic trauma and pelvic floor function in recent years. Although there are five fracture types,they are all based on fracture morphology,without considering the pulling force of ligaments,joint capsular and muscles. A perfect classification needs to describe the displacement of bone mass in three-dimensional space to better guide reduction and fixation. The seven incision and exposure methods are still the traditional open-eye surgery,and how to protect the criss-crossing vascular neural network and pelvic organs is still the focus. Quadrilateral defect causes dislocation of artificial hip joint,and quantitative evaluation of quadrilateral defect volume and revision techniques are still a hot topic. In this paper,the viewpoints of three-dimensional network structure of acetabular pelvic vascular anatomy,anatomical surgical target channel and fixation anchor point of acetabular fracture reduction are proposed to design new techniques for accurate and minimally invasive surgical operations,in order to realize the requirements of rapid orthopedic rehabilitation.

Does a simultaneous ventral/dorsal approach provide better reduction quality in treating acetabular fracture involving both columns with displaced posterior wall?

INTRODUCTION: Various surgical techniques have been proposed to manage acetabular fractures involving both columns with posterior wall displacement. However, the optimal surgical approach to achieve satisfactory reduction quality remains controversial. MATERIALS AND METHODS: This retrospective study evaluated 34 patients with fractures who were treated at a single medical institution. The patients were divided into two groups according to the ventral/dorsal surgical approach employed: simultaneous (SI) and sequential (SE). Perioperative parameters, as well as radiological and functional outcomes, were analyzed and compared between the two groups. RESULTS: The SI and SE groups comprised 9 and 23 out of the 34 patients, respectively. The SI group exhibited a significantly shorter surgical time and lower estimated blood loss than the SE group (p = 0.04 and 0.03, respectively). The quality of reductions of the anterior and posterior columns was similar between the two groups; however, superior reduction in the fracture gap of the posterior wall was observed in the SI group, as revealed by axial and coronal computed tomography scans. CONCLUSIONS: A simultaneous ventral and dorsal approach through the pararectus and the modified Gibson approach confer clinical advantages in reducing the fracture gap, surgical time, and intraoperative blood loss when managing acetabular fractures involving both columns and a displaced posterior wall. Therefore, these surgical approaches may be considered to be optimal for achieving satisfactory reduction quality in such fractures.

Angioembolization Has Similar Efficacy and Lower Total Charges than Preperitoneal Pelvic Packing in Patients With Pelvic Ring or Acetabulum Fractures.

OBJECTIVES: To compare cost, hospital-related outcomes, and mortality between angioembolization (AE) and preperitoneal pelvic packing (PPP) in the setting of pelvic ring or acetabulum fractures. METHODS: . DESIGN: Retrospective database review. SETTING: National Inpatient Sample, years 2016-2020. PATIENT SELECTION CRITERIA: Hospitalized adult patients who underwent AE or PPP in the setting of a pelvic ring or acetabulum fracture. OUTCOME MEASURES AND COMPARISONS: Mortality and hospital-associated outcomes, including total charges, following AE versus PPP in the setting of pelvic ring or acetabulum fractures. RESULTS: A total of 3780 patients, 3620 undergoing AE and 160 undergoing PPP, were included. No significant differences in mortality, length of stay, time to procedure, or discharge disposition were found ( P > 0.05); however, PPP was associated with significantly greater charges than AE ( P = 0.04). Patients who underwent AE had a mean total charge of $250,062.88 while those undergoing PPP had a mean total charge of $369,137.16. CONCLUSIONS: Despite equivalent clinical efficacy in terms of mortality and hospital-related outcomes, PPP was associated with significantly greater charges than AE in the setting of pelvic ring or acetabulum fractures. This data information can inform clinical management of these patients and assist trauma centers in resource allocation. LEVEL OF EVIDENCE: Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.