Inhalable nanocatchers for SARS-CoV-2 inhibition.

The global coronavirus disease 2019 (COVID-19) pandemic, caused by severe acute respiratory syndrome (SARS)-like coronavirus (SARS-CoV-2), presents an urgent health crisis. More recently, an increasing number of mutated strains of SARS-CoV-2 have been identified globally. Such mutations, especially those on the spike glycoprotein to render its higher binding affinity to human angiotensin-converting enzyme II (hACE2) receptors, not only resulted in higher transmission of SARS-CoV-2 but also raised serious concerns regarding the efficacies of vaccines against mutated viruses. Since ACE2 is the virus-binding protein on human cells regardless of viral mutations, we design hACE2-containing nanocatchers (NCs) as the competitor with host cells for virus binding to protect cells from SARS-CoV-2 infection. The hACE2-containing NCs, derived from the cellular membrane of genetically engineered cells stably expressing hACE2, exhibited excellent neutralization ability against pseudoviruses of both wild-type SARS-CoV-2 and the D614G variant. To prevent SARS-CoV-2 infections in the lung, the most vulnerable organ for COVID-19, we develop an inhalable formulation by mixing hACE2-containing NCs with mucoadhesive excipient hyaluronic acid, the latter of which could significantly prolong the retention of NCs in the lung after inhalation. Excitingly, inhalation of our formulation could lead to potent pseudovirus inhibition ability in hACE2-expressing mouse model, without imposing any appreciable side effects. Importantly, our inhalable hACE2-containing NCs in the lyophilized formulation would allow long-term storage, facilitating their future clinical use. Thus, this work may provide an alternative tactic to inhibit SARS-CoV-2 infections even with different mutations, exhibiting great potential for treatment of the ongoing COVID-19 epidemic.

Impact of Different Mixing Methods on the Performance of Suspension-Based Transdermal Delivery Systems.

Suspension-based matrix transdermal delivery systems (TDSs) are specialized systems that maintain a continuous driving force for drug delivery over prolonged wear. The pressure-sensitive adhesive (PSA) is the most critical constituent of such systems. Our study aimed to determine the effect of different mixing methods on the performance of silicone PSA-based suspension TDSs. Lidocaine suspension TDSs were prepared using conventional slow rotary mixing, high-speed homogenization, bead-mill homogenization, vortex shaking, and by an unguator. Resultant TDSs were tested for tack, shear, and peel properties and correlated to coat weight, content uniformity, microstructure, and in vitro permeation across dermatomed human skin. Every mixing method tested caused a significant reduction in peel. However, bead-mill homogenization resulted in significant loss of all adhesive properties tested, while unguator-mixed TDSs retained most properties. Good linear correlation (R2 = 1.000) between the shear properties of the TDSs with the average cumulative amount of lidocaine permeated after 24 h was observed, with no significant difference between percutaneous delivery from slow rotary-mixed systems (1334 ± 59.21 µg/cm2) and unguator-mixed systems (1147 ± 108.3 µg/cm2). However, significantly lower delivery from bead-mill homogenized systems (821.1 ± 28.00 µg/cm2) was noted. While many factors affect TDS performance, careful consideration must also be given to the processing parameters during development as they have been shown to affect the resultant system's therapeutic efficacy. Extensive mixing with bead-mill homogenization demonstrated crystallization of drug, loss in adhesive properties, coat weight, and film thickness, with reduced transdermal delivery of lidocaine from the prepared system.

Design and development of lipid modified chitosan containing muco-adhesive self-emulsifying drug delivery systems for cefixime oral delivery.

Current study was aimed to design and develop muco-adhesive self-nano emulsifying drug delivery system (SNEDDs) for improved pharmacokinetics of Cefixime (CFX) in rabbits. The components of SNEDDs formulation i.e., cinnamon oil, Tween® 80, and PEG 200 as oil, surfactant, and co-surfactant respectively were selected based on their high solubilizing capability of the drug. SNEDDs formulation was optimized using Design of experiments (D-optimal design) in terms of droplet size, poly dispersity index and zeta potential. The optimized SNEDDs formulation was studied for various parameters like droplet size, morphology, zeta potential, emulsification, optical clarity, thermodynamic stability, GIT stability, and robustness to dilution. CFX was loaded to optimized formulation to form CFX-SNEDDs. Furthermore, acyl-chitosan, a muco-adhesive agent, was added to CFX-SNEDDS to prepare CHT-CFX-SNEDDS. In vitro drug release showed the controlled release behavior reached a maximum value of 70 % at pH 6.8 within 24 h. The droplet size, atomic force microscopy, and optical clarity analysis revealed the formation of nanosized emulsion (156 ± 25 nm) with spherical morphology. Also in vivo pharmacokinetic studies on rabbits showed an increased drug plasma concentration for CHT-CFX-SNEDDs (15 ± 3 µg/mL) and CFX-SNEDDs (9 ± 2 µg/mL) in comparison with control CFX (4 ± 1 µg/mL). The results indicated that the developed CHT-CFX-SNEDDs with an increased degree of solubilization, permeation, and nanosized range emulsion enhance the oral performance of CFX.

Cold Flow Evaluation in Transdermal Drug Delivery Systems by Measuring the Width of the Oozed Adhesive.

The objective of this study was to develop a simpler and more practical quantitative evaluation method of cold flow (CF) in transdermal drug delivery systems (TDDSs). CF was forcibly induced by loading a weight on a punched-out sample (bisoprolol and tulobuterol tapes). When the extent of CF was analyzed using the area of oozed adhesive as following a previously reported method, the CF profiles were looked different between the samples 12 mm in diameter subjected to a 0.5-kg weight and samples 24 mm in diameter subjected to a 2.0-kg weight despite an equal load per unit area (4.42 g/mm2). The width of oozed adhesive around the original sample was suggested to be an index that properly describes the relationship between the load per unit area and the extent of CF. Further, it was clarified that the average CF width over the entire circumference of the sample was the same whether the samples were round or square as long as the sample area and load were the same. We also observed a linear relationship between the CF width and the aspect ratio of oval and rectangular samples. These results indicated that the CF properties of typical TDDS products lacking CF-proof processing at the edges could be determined by testing samples cut from the product rather than the whole TDDS patch. The proposed width measuring method was simple and useful for optimizing the composition of the adhesive and for testing the quality of the product.

Evidences of Biomimetic and Nonantibiotic Characteristics of the Zinc-Carboxymethyl Chitosan-Genipin Organometallic Complex and Its Biocompatibility Aspects.

Bioinspired nonantibiotics can prove to be a better and an efficient tool to fight against antimicrobial resistance. In our study, biomaterial composed of zinc-carboxymethyl chitosan (CMC)-genipin was investigated for this purpose. Briefly, CMC was synthesized and transformed to porous scaffolds using the freeze drying method. The scaffolds were cross-linked and stabilized with genipin and zinc (2 M zinc acetate), respectively. FTIR spectroscopic data testified Zn complex formation and pointed out the absence of water molecule like that of zinc motif containing proteins. Hence, the complex may be termed as biomimetic. Genipin (0.5%) cross-linking appeared to contribute additively to the wet compressive strength of the zinc-CMC scaffolds. Biodegradation data revealed better stability of CMC-genipin-zinc scaffolds in enzymatic and nonenzymatic conditions than their redundant controls. The scaffolds seem to support adhesion and proliferation of human dental pulp stem cells and were hemocompatible to human red blood corpuscles, as revealed by scanning electron microscopy. The scaffolds were found to be antibacterial and mildly antibiofilm when tested against biofilm-forming bacteria, that is, Staphylococcus aureus (ATCC 9144), making it a potential nonantibiotic-like biomaterial. To conclude, this organometallic complex-based biomaterial may potentially serve as a weapon against antimicrobial resistance. Furthermore, the biomaterial potentially finds its application in dental, maxillofacial, and orthopedic tissue engineering applications.

Mechanical characterization and ex vivo evaluation of anticancer and antiviral drug printed bioadhesive film for the treatment of cervical cancer.

As research progresses on personalized medicines, it is clear that personalized and flexible formulations can provide effective treatment with reduced side effects especially for diseases like cancer, characteristic of high patient variability. 2D and 3D printers are frequently reported in the literature for the preparation of pharmaceutical products with adjusted dose and selected drug combinations. However, in-depth characterization studies of these formulations are rather limited. In this paper, ex vivo and mechanical characterization studies of antiviral and anticancer drug printed film formulations designed for personalized application were performed. Effects of the printing process with pharmaceutical formulations such as paclitaxel (PCX):cyclodextrin (CD) complex or cidofovir (CDV) encapsulated into poly(ethylene glycol)-polycaprolactone (PEG-PCL) nanoparticles on the films were evaluated through a series of mechanical characterization studies. Inkjet printing process was found to cause no significant change in the thicknesses of the film formulations, while mechanical strength and surface free energy increased and nano-sized voids in the film structure decreased. According to the mechanical characterization data, the unprinted film had maximum force (Fmax) value of 15.6 MPa whereas Fmax increased to 43.8 MPa for PCX:CD complex printed film and to 37.7 MPa for the antiviral CDV-PEG-PCL nanoparticle printed film. In the light of ex vivo findings of sheep cervix-uterine tissue, bioadhesive properties of film formulations significantly improved after inkjet printing with different drug formulations. It has also been shown that the anticancer formulation printed on the film was maintained at the cervix tissue surface for >12 h. This study has shown for the first time that inkjet printing process does not adversely affect the mechanical properties of the bioadhesive film formulations. It has also been shown that durable bioadhesive film formulations for personalized dosing can be prepared by combining nanotechnology and inkjet printing.

Pharmacokinetics of Panax notoginseng Saponins in Adhesive and Normal Preparation of Fufang Danshen.

BACKGROUND AND OBJECTIVE: Fufang Danshen formula, a famous Chinese patent medicine containing Salvia miltiorrhiza, Panax notoginseng and borneol, has been widely used in the treatment of coronary heart disease. The application is restricted by low bioavailability partly due to Panax notoginseng saponins (PNS) instability and low in vivo absorption. Thus, adhesive pellets were developed to improve bioavailability. The objectives of the present study were to evaluate the adhesive preparation by describing PNS's plasma pharmacokinetics in vivo and compare adhesive micro pills with normal preparation. METHOD: LC-MS/MS method was established to analyze five ingredients, notoginsenoside R1 (R1), ginsenoside Rg1 (Rg1), ginsenoside Rb1 (Rb1), ginsenoside Re (Re), and ginsenoside Rd (Rd), in rats' plasma to describe the pharmacokinetic parameters of PNS. RESULTS: The pharmacokinetic parameters were significantly different after oral administration three formulations. The results show adhesive formulations are superior to Fufang Danshen tablet (FDT); there are differences between the two adhesive, but not obvious. CONCLUSIONS: It was found that the modification with adhesive materials improved PNS bioavailability in Fufang Danshen formula. These findings provide a way for further in vivo evaluation of different formulations.

In vitro and In vivo Studies on a Novel Bioadhesive Colloidal System: Cationic Liposomes of Ibuprofen.

The objective of this study was to develop an ocular drug delivery system built on the cationic liposomes, a novel bioadhesive colloidal system, which could enhance the precorneal residence time, ocular permeation, and bioavailability of ibuprofen. The optimal formulation of cationic liposomes prepared by ethanol injection method was ultimately confirmed by an orthogonal L9 (33) test design. In addition, γ-scintigraphic technology and the microdialysis technique were utilized in the assessment of in vivo precorneal retention capability and ocular bioavailability individually. In the end, we acquired the optimal formulation of ibuprofen cationic liposomes (Ibu-CL) by orthogonal test design, and the particle size and entrapment efficiency (EE%) were 121.0 ± 3.5 nm and 72.9 ± 3.4%, respectively. In comparison to ibuprofen eye drops (Ibu-ED), Ibu-CL could significantly prolong the T max to 100 min and the AUC to 1.53-folds, which indicated that the Ibu-CL could improve the precorneal retention time and bioavailability of ibuprofen. Consequently, these outcomes designated that the ibuprofen cationic liposomes we researched probably are a promising application in ocular drug delivery system.

Sinonasal Delivery of Resveratrol via Mucoadhesive Nanostructured Microparticles in a Nasal Polyp Mouse Model.

Resveratrol (RSV) has been shown to effectively suppress chronic rhinosinusitis with nasal polyps in a mouse model; however, when locally administered to the sinonasal cavity, bolus RSV is limited by low drug bioavailability owing to its low aqueous solubility and relatively rapid clearance from the administration site. To address this limitation, we propose mucoadhesive nanostructured microparticles (PLGA/PEG NM) as a potential carrier for the sinonasal delivery of RSV. In this study, PLGA/PEG NM released RSV in a sustained manner. Owing to the enlarged specific surface area of the nanostructures, PLGA/PEG NM had synergistically enhanced mucoadhesiveness and thus showed improved in vivo retention properties in the sinonasal cavity. Therefore, when tested in a mouse nasal polyp model, PLGA/PEG NM mitigated polyp formation and restored epithelial integrity better than the control treatments. The therapeutic effect was similar at half the dose of PLGA/PEG NM, suggesting improved local bioavailability of RSV in the sinonasal cavity.

Characterization of natural polymers from jackfruit pulp, calendula flowers and tara seeds as mucoadhesive and controlled release components in buccal tablets.

Identification and physiochemical parameters such as solubility, loss on drying, viscosity, pH, swelling index, starch and gum constituents were determined in natural polymers and showed satisfactory results. Spectral studies established the compatibility of natural polymers. The drug release kinetics in preliminary trial batches showed that tablets containing natural mucilages and gum showed a prolonged drug release comparable to Carbopol 974P and Methocel K4M. Also, all tablets showed a satisfactory drug permeability flux. Acute toxicity studies confirmed the safety of natural polymers. Using response surface method supported by 23 factorial design, the optimized buccoadhesive tablets (C1) with drug release at 8h (R8h, %) of 53.48±0.048% showed controlled release over ≥8h and followed the Korsmeyer-Peppas model with anomalous (non-Fickian) diffusion mechanism. Mucoadhesive strength was found to be 42.71±0.49g. Comparative dissolution study between prepared and marketed formulation showed that there was no significant difference in drug release profile having similarity factor 82.97. In vivo study for optimized formulation of the buccoadhesive tablets showed the better absolute bioavailability (71.26%) against the oral solution (51.22%). Histological study confirmed non-irritant nature and stability study indicated stability of the formulation.

Injectable dopamine-modified poly(α,ß-aspartic acid) nanocomposite hydrogel as bioadhesive drug delivery system.

Hydrogel systems based on cross-linked polymeric materials with adhesive properties in wet environments have been considered as promising candidates for tissue adhesives. The 3,4-dihydroxyphenylalanine (DOPA) is believed to be responsible for the water-resistant adhesive characteristics of mussel adhesive proteins. Under the inspiration of DOPA containing adhesive proteins, a dopamine-modified poly(α,ß-aspartic acid) derivative (PDAEA) was successfully synthesized by successive ring-opening reactions of polysuccinimide (PSI) with dopamine and ethanolamine, and an injectable bioadhesive hydrogel was prepared via simply mixing PDAEA and FeCl3 solutions. The formation mechanism of the hydrogel was investigated by ultraviolet-visible (UV-vis) spectroscopic, Fourier transformation infrared (FT-IR) spectroscopic, visual colorimetric measurements and EDTA immersion methods. The study demonstrated that the PDAEA-Fe3+ hydrogel is a dual cross-linking system composed of covalent and coordination crosslinks. The PDAEA-Fe3+ hydrogel is suitable to serve as a bioadhesive agent according to the rheological behaviors and the observed significant shear adhesive strength. The slow and sustained release of the model drug curcumin from the hydrogel in vitro demonstrated the hydrogel could also be potentially used for drug delivery. Moreover, the cytotoxicity tests in vitro suggested the prepared polymer and hydrogel possessed excellent cytocompatibility. All the results indicated that the dopamine modified poly(α,ß-aspartic acid) derivative based hydrogel was a promising candidate for bioadhesive drug delivery system. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1000-1008, 2017.

Study of the Mucoadhesive Potential of Carbopol Polymer in the Preparation of Microbeads Containing the Antidiabetic Drug Glipizide.

The present investigation was aimed at exploitation of the mucoadhesive potential of carbopol 934P polymer in developing microbeads of glipizide (GLP) for its effectivity in controlling blood sugar in diabetic patients. Various batches of GLP beads were prepared by an emulsion-solvent evaporation technique using the release-retarding polymer carbopol and subjected to a systematic evaluation such as physical characterization, ex vivo mucoadhesion, hydration and erosion test, and in vitro drug release; and instrumental and in vivo studies were performed with the best formulation. The highest yield and loading efficiency were observed as 94 and ∼90%, respectively. The mean particle size of the microbeads ranged from 832 to 742 µm. The oval shape of the microbeads with slight roughness was apparent in the SEM micrograph. The release period was extended till 18 h. In vitro release of the drug from the beads followed the diffusion and erosion mechanism. In the oral glucose tolerance test (OGTT), there is a significant (p < 0.01) reduction in fasting blood glucose levels in Wistar rat and guinea pig in comparison with that using the marketed product. Results indicated that process parameters-drug-polymer ratio, concentration of the surfactant, and stirring speed-controlled the various characteristics of the microparticles. The mucoadhesivity test ensured strong adherence of the beads to the mucosal membrane in pH 1.2 for a prolonged period. Owing to the mucoadhesivity of carbopol 934P, prolonged release of GLP and reduction of fasting sugar in the animal model were observed to a satisfactory level, and thus, management of diabetes in a better manner is expected with this new formulation.

Comparative study on the predictability of statistical models (RSM and ANN) on the behavior of optimized buccoadhesive wafers containing Loratadine and their in vivo assessment.

OBJECTIVE: Buccoadhesive wafer dosage form containing Loratadine is formulated utilizing Formulation by Design (FbD) approach incorporating sodium alginate and lactose monohydrate as independent variable employing solvent casting method. METHODS: The wafers were statistically optimized using Response Surface Methodology (RSM) and Artificial Neural Network algorithm (ANN) for predicting physicochemical and physico-mechanical properties of the wafers as responses. Morphologically wafers were tested using SEM. Quick disintegration of the samples was examined employing Optical Contact Angle (OCA). RESULTS: The comparison of the predictability of RSM and ANN showed a high prognostic capacity of RSM model over ANN model in forecasting mechanical and physicochemical properties of the wafers. The in vivo assessment of the optimized buccoadhesive wafer exhibits marked increase in bioavailability justifying the administration of Loratadine through buccal route, bypassing hepatic first pass metabolism.

A novel transdermal drug delivery system based on self-adhesive Janus nanofibrous film with high breathability and monodirectional water-penetration.

Transdermal drug delivery systems (TDDS) had achieved significant success in medical practice, but still suffered from adhesion failure and skin reaction due to the occlusive properties of hydrophobic pressure sensitive adhesives (PSAs). In order to solve these problems, a novel TDDS patch based on self-adhesive Janus nanofibrous film was prepared by a multilayered electrospinning. This multifunctional patch was a bilayer structure. The subjacent layer was a hydrophobic and adhesive fibrous layer electrospun from polyacrylate PSA (HPSA), and the upper backing layer was a hydrophilic cross-linked poly (vinyl alcohol) (c-PVA) nanofibrous film. The structures of the HPSA/c-PVA composite fibrous films were characterized and their application properties, including adherence performance, water vapor permeability, water-penetration, release characteristics, and skin irritation were evaluated. The results indicated that the HPSA/c-PVA composite fibrous films could provide suitable adhesive properties for TDDS application, excellent capacity for drug loading and release, aesthetical appearance and high safety for use on the skin. Especially, due to the nanofibrous network structures and the hydrophobic-hydrophilic wettability gradient from hydrophobic HPSA layer to the hydrophilic c-PVA layer, the Janus films possessed high breathability and monodirectional water-penetration. Water could penetrate from the hydrophobic to the hydrophilic side, but could not permeate through in the opposite direction. This may provide a feasible solution to the problems caused by the water, sweat, or wound exudate on the skin, when the hydrophobic PSAs were used as matrix for TDDS and wound dressing patches.

Development of a buccal mucoadhesive film for fast dissolution: mathematical rationale, production and physicochemical characterization.

The validity of a mathematical rationale for preparation of a fast-dissolving buccal mucoadhesive was tested. A buccal mucoadhesive biopolymeric formulation has been developed having pullulan as the main component. The formulation was duly evaluated physicochemically, via assays for intrinsic viscosity (resulting in 71.61 cm3 g(-1)), differential scanning calorimetry analysis (resulting in a Tg = 63 °C), thermogravimetric analysis (244-341 °C), moisture content determinations (14%, w/w), dissolution timeframe (41.6 s), mucoadhesion force (40 kg/cm2), scanning electron microscopy analyses (critical ray under 1.0 µm), mechanic strength (tensile strength = 58 N/mm2, deformation = 4.4%). The mucoadhesive formulation exhibited important characteristics for a drug carrier, that is, a 6 cm2 area, a fast dissolution timeframe, an adequate mucoadhesivity, resistance to both oxygen and water vapor penetration, increased viscosity in solution (ranging from 33.2 cm3/g to 71.61 cm3/g), easy molding, suitable water solubility and transparency.

Effect of pressure sensitive adhesive and vehicles on permeation of terbinafine across porcine hoof membrane.

The purpose of this study was to investigate characteristics of transungual drug delivery and the feasibility of developing a drug-in-adhesive formulation of terbinafine. The permeation of terbinafine from a PSA matrix across porcine hoof membrane was determined using a plate containing poloxamer gel. The permeation rate of terbinafine across hairless mouse skin was evaluated using a flow-through diffusion cell system. The permeation of terbinafine across the hoof membranes was the highest from the silicone adhesive matrix, followed by PIB, and most of the acrylic adhesives, SIS, and SBS. The rank order of permeation rate across mice skin was different from the rank order across porcine hooves. The amount of terbinafine permeated across the porcine hoof membranes poorly correlated with the amount of terbinafine remaining inside the hooves after 20 days, however, the ratio between rate of terbinafine partitioning into the hoof membrane and its rate of diffusion across the membrane was relatively constant within the same type of PSA. For influence of various vehicles in enhancing permeation of terbinafine across the hoof membrane, all vehicles except Labrasol(®) showed tendency to improve permeation rate. However, the enhancement ratio of a given vehicle differed from one adhesive to another with a moderate correlation between them. The infrared spectrum of the hoof treated with NMP, PPG 400 or PEG 200 indicated that the conformation of keratin changed from a non-helical to a helical structure.

A drug-in-adhesive matrix based on thermoplastic elastomer: evaluation of percutaneous absorption, adhesion, and skin irritation.

A novel drug-in-adhesive matrix was designed and prepared. A thermoplastic elastomer, styrene-isoprene-styrene (SIS) block copolymer, in combination with tackifying resin and plasticizer, was employed to compose the matrix. Capsaicin was selected as the model drug. The drug percutaneous absorption, adhesion properties, and skin irritation were investigated. The results suggested that the diffusion through SIS matrix was the rate-limiting step of capsaicin percutaneous absorption. [SI] content in SIS and SIS proportions put important effects on drug penetration and adhesion properties. The chemical enhancers had strong interactions with the matrix and gave small effect on enhancement of drug skin permeation. The in vivo absorption of samples showed low drug plasma peaks and a steady and constant plasma level for a long period. These results suggested that the possible side effects of drug were attenuated, and the pharmacological effects were enhanced with an extended therapeutic period after application of SIS matrix. The significant differences in pharmacokinetic parameters produced by different formulations demonstrated the influences of SIS copolymer on drug penetrability. Furthermore, the result of skin toxicity test showed that no skin irritation occurred in guinea pig skin after transdermal administration of formulations.

Comparison and evaluation of urinary biomarkers for occupational exposure to spray adhesives containing 1-bromopropane.

Three metabolites of 1-bromopropane (1-BP) were measured in urine samples collected from 30 workers exposed to 1-BP at two facilities making furniture seat cushions and evaluated for use as biomarkers of exposure. The mercapturic acid metabolite, N-acetyl-S-(n-propyl)-l-cysteine (AcPrCys), 3-bromopropionic acid (3-BPA), and bromide ion levels (Br(-)) were quantitated for this evaluation. The high exposure group consisted of 13 workers employed as adhesive sprayers who assembled foam cushions using 1-BP containing spray adhesives and the low exposure group consisted of 17 non-sprayers, who worked in various jobs without spraying adhesives. All workers' urine voids were collected over the same 48 h period at work, and at home before bedtime, and upon awakening. Urinary AcPrCys and Br(-) levels were elevated in the sprayers compared to that of non-sprayers. Following HPLC-MS/MS analysis of mercapturic acid metabolite levels, 50 urine samples having the highest levels of AcPrCys were analyzed for 3-BPA. No 3-BPA was detected in any of the samples. The data collected from this study demonstrate that AcPrCys and Br(-) are effective biomarkers of 1-BP exposure, but 3-BPA is not.

Silicone adhesive, a better matrix for tolterodine patches-a research based on in vitro/in vivo studies.

OBJECTIVE: To design and optimize a drug-in-adhesive (DIA) type transdermal patch for tolterodine (TOL) based on acrylic and silicone matrixes. METHODS: Initial in vitro studies were conducted to optimize the formulations. Two types of adhesive matrixes, drug loading, and enhancers were evaluated on the TOL transport across rabbit skin. For in vivo studies, patches were administered to rabbit abdominal skin. Pharmacokinetic assessments were performed based on plasma level of TOL up to 28 h for acrylic patch and 52 h for silicone patch after topical application. RESULTS: The final formulation of acrylic adhesive type patch consisted of 10% TOL (w/w) and 5.8 × 10(-4) mol isopropyl myristate (IPM) and 2.9 × 10(-4) mol Span 80 in per unit gram (mol/g) of adhesive, while 2.5% TOL (w/w) and 2.9 × 10(-4) mol/g IPM for silicone adhesive type patch. Comparison of the pharmacokinetic parameters between two types of patches showed that the steady-state concentration of silicone type patch was 2-fold higher than that of acrylic type patch being 0.97 mg/L versus 0.49 mg/L, and the absolute bioavailability was 27.5% for silicone type patch and 6.3% for acrylic type patch, respectively. In addition, the prediction of in vivo drug level from the in vitro permeation data of silicone adhesive formulation was in good agreement with actual observed concentration data in rabbits. CONCLUSION: These results indicate that the silicone type of TOL patch is an appropriate delivery system for the treatment of overactive bladder (OAB).

Carbamazepine mucoadhesive nanoemulgel (MNEG) as brain targeting delivery system via the olfactory mucosa.

Carbamazepine (CBZ) is an antiepileptic orally administered drug, but due to its low solubility in water, its gastrointestinal absorption is slow and irregular, leading to delayed brain uptake with consequent peripheral side actions. The objective of this study was the brain targeting of CBZ via the olfactory mucosa in form of an intranasal mucoadhesive o/w nanoemulgel (MNEG). CBZ was formulated in a nanoemulgel system containing oleic acid/labrasol in a ratio of 1:5 as oil/surfactant and 0.1% xanthan gum as anionic mucoadhesive polymer. The prepared MNEG was characterized with respect to oil droplet size, mucoadhesion, in-vitro release of the drug and CBZ uptake by phosphatidylcoline liposomes as an in-vitro model for olfactory cells. The anticonvulsant action of nasal MNEG was studied on chemically and electrically induced convulsive Swiss Albino mice. The in-vitro release of CBZ from MNEG was very low, however CBZ uptake via liposomal membrane reached 65% within 1 hr. Treatment of animals with MNEG significantly prolonged the onset times for convulsion of chemically convulsive mice and protected the animals from two electric shocks. One can thus spire and hope for the emergence of a new intranasal treatment of epilepsy with consequent decrease in the peripheral side actions of CBZ.