Exploring toilet plume bioaerosol exposure dynamics in public toilets using a Design of Experiments approach.

Bioaerosols generated during toilet flushing can contribute to the spread of airborne pathogens and cross-contamination in indoor environments. This presents an increased risk of fomite-mediated or aerosol disease transmission. This study systematically investigated the factors contributing to increased bioaerosol exposure following toilet flushing and developed an empirical model for predicting the exposure-relevant bioaerosol concentration. Air in a toilet cubicle was sampled by impaction after seeding with Clostridium difficile spores. Design of Experiments (DoE) main effects screening and full factorial design approaches were then employed to investigate the significant factors that heighten the risk of exposure to bioaerosols post-flush. Our findings reveal that the inoculated bacterial concentration (C), time elapsed after flushing (t), lateral distance (d), and mechanical ventilation (v) are significant predictors of bioaerosol concentration, with p-values < 0.05. The interaction term, C × d showed a marked increase in bioaerosol concentration up to 232 CFU/m3 at the closest proximity and highest pathogen load. The interplay of C and t (C × t) demonstrated a time-dependent attenuation of bioaerosol viability, with concentrations peaking at 241 CFU/m3 immediately post-flush and notably diminishing over time. The lateral distance and time post-flush (d × t) interaction also revealed a gradual decrease in bioaerosol concentration, highlighting the effectiveness of spatial and temporal dilution in mitigating bioaerosol exposure risks. Furthermore, there is an immediate rise in relative humidity levels post-flush, impacting the air quality in the toilet environment. This study not only advances our understanding of exposure pathways in determining bioaerosol exposure, but also offers pivotal insights for designing targeted interventions to reduce bioaerosol exposure. Recommendations include designing public toilets with antimicrobial surfaces, optimizing ventilation, and initiating timely disinfection protocols to prioritise surfaces closest to the toilet bowl during peak exposure periods, thereby promoting healthier indoor environments and safeguarding public health in high-traffic toilet settings.

Characteristics of PM2.5 bounded carbonaceous aerosols, carbon dioxide and its stable carbon isotopes (δ13C) in rural households in northwest China: Effect of different fuel combustion.

In order to fully understand the carbon emission from different fuels in rural villages of China, especially in the typical atmospheric pollution areas. The characteristics of carbonaceous aerosols and carbon dioxide (CO2) with its stable carbon isotope (δ13C) were investigated in six households, which two households used coal, two households used wood as well as two households used biogas and liquefied petroleum gas (LPG), from two rural villages in Fenwei Plain from March to April 2021. It showed that the fine particulate matter (PM2.5) emitted from biogas and LPG couldn't be as lower as expected in this area. However, the clean fuels could relatively reduce the emissions of organic carbon (OC) and element carbon (EC) in PM2.5 compare to the solid fuels. The pyrolyzed carbon (OP) accounted more total carbon (TC) in coal than the other fuels use households, indicating that more water-soluble OC existed, and it still had the highest secondary organic carbon (SOC) than the other fuels. Meantime, the coal combustions in the two villages had the highest CO2 concentration of 527.6 ppm and 1120.6 ppm, respectively, while the clean fuels could effectively reduce it. The average δ13C values (-26.9‰) was much lighter than almost all the outdoor monitoring and similar to the δ13C values for coal combustion and vehicle emission, showing that they might be the main contributors of the regional atmospheric aerosol in this area. During the sandstorm, the indoor PM2.5 mass and CO2 were increasing obviously. The indoor cancer risk of PAHs for adults and children were greater than 1 × 10-6, exert a potential carcinogenic risk to human of solid fuels combustion in rural northern China. It is important to continue concern the solid fuel combustion and its health impact in rural areas.

China's "coal-to-gas" policy had large impact on PM1.0 distribution during 2016-2019.

Particulate matter with an aerodynamic diameter of less than 1 µm (PM1.0) can be extremely hazardous to human health, so it is imperative to accurately estimate the spatial and temporal distribution of PM1.0 and analyze the impact of related policies on it. In this study, a stacking generalization model was trained based on aerosol optical depth (AOD) data from satellite observations, combined with related data affecting aerosol concentration such as meteorological data and geographic data. Using this model, the PM1.0 concentration distribution in China during 2016-2019 was estimated, and verified by comparison with ground-based stations. The coefficient of determination (R2) of the model is 0.94, and the root-mean-square error (RMSE) is 8.49 µg/m3, mean absolute error (MAE) is 4.10 µg/m3, proving that the model has a very high performance. Based on the model, this study analyzed the PM1.0 concentration changes during the heating period (November and December) in the regions where the "coal-to-gas" policy was implemented in China, and found that the proposed "coal-to-gas" policy did reduce the PM1.0 concentration in the implemented regions. However, the lack of natural gas due to the unreasonable deployment of the policy in the early stage caused the increase of PM1.0 concentration. This study can provide a reference for the next step of urban air pollution policy development.

Submicron aerosol pollution in Greater Cairo (Egypt): A new type of urban haze?

Greater Cairo, the largest megacity of the Middle East North Africa (MENA) region, is currently suffering from major aerosol pollution, posing a significant threat to public health. However, the main sources of pollution remain insufficiently characterized due to limited atmospheric observations. To bridge this knowledge gap, we conducted a continuous 2-month field study during the winter of 2019-2020 at an urban background site, documenting for the first time the chemical and physical properties of submicron (PM1) aerosols. Crustal material from both desert dust and road traffic dust resuspension contributed as much as 24 % of the total PM1 mass (rising to 66 % during desert dust events), a figure not commonly observed in urban environments. Our observations showed significant decreases in black carbon concentrations and ammonium sulfate compared to data from 15 years ago, indicating an important reduction in both local and regional emissions as a result of effective mitigation measures. The diurnal variability of carbonaceous aerosols was attributed to emissions emanating from local traffic at rush hours and nighttime open biomass burning. Surprisingly, semi-volatile ammonium chloride (NH4Cl) originating from local open biomass and waste burning was found to be the main chemical species in PM1 over Cairo. Its nighttime formation contributed to aerosol water uptake during morning hours, thereby playing a major role in the build-up of urban haze. While our results confirm the persistence of a significant dust reservoir over Cairo, they also unveil an additional source of highly hygroscopic (semi-volatile) inorganic salts, leading to a unique type of urban haze. This haze, with dominant contributors present in both submicron (primarily as NH4Cl) and supermicron (largely as dust) modes, underscores the potential implications of heterogeneous chemical transformation of air pollutants in urban environments.

Photochemical evolution of the molecular composition of dissolved organic carbon and dissolved brown carbon from wood smoldering.

Recently, extreme wildfires occur frequently around the world and emit substantial brown carbon (BrC) into the atmosphere, whereas the molecular compositions and photochemical evolution of BrC remain poorly understood. In this work, primary smoke aerosols were generated from wood smoldering, and secondary smoke aerosols were formed by the OH radical photooxidation in an oxidation flow reactor, where both primary and secondary smoke samples were collected on filters. After solvent extraction of filter samples, the molecular composition of dissolved organic carbon (DOC) was determined by Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS). The molecular composition of dissolved BrC was obtained based on the constraints of DOC formulae. The proportion of dissolved BrC fractions accounted for approximately 1/3-1/2 molecular formulae of DOC. The molecular characteristics of dissolved BrC showed higher levels of carbon oxidation state, double bond equivalents, and modified aromaticity index than those of DOC, indicating that dissolved BrC fractions were a class of organic structures with relatively higher oxidation state, unsaturated and aromatic degree in DOC fractions. The comparative analysis suggested that aliphatic and olefinic structures dominated DOC fractions (contributing to 70.1%-76.9%), while olefinic, aromatic, and condensed aromatic structures dominated dissolved BrC fractions (contributing to 97.5%-99.9%). It is worth noting that dissolved BrC fractions only contained carboxylic-rich alicyclic molecules (CRAMs)-like structures, unsaturated hydrocarbons, aromatic structures, and highly oxygenated compounds. CRAMs-like structures were the most abundant species in both DOC and dissolved BrC fractions. Nevertheless, the specific molecular characteristics for DOC and dissolved BrC fractions varied with subgroups after aging. The results highlight the similarities and differences in the molecular compositions and characteristics of DOC and dissolved BrC fractions with aging. This work will provide insights into understanding the molecular composition of DOC and dissolved BrC in smoke.

A quanta-independent approach for the assessment of strategies to reduce the risk of airborne infection.

The Wells-Riley model is extensively used for retrospective and prospective modelling of the risk of airborne transmission of infection in indoor spaces. It is also used when examining the efficacy of various removal and deactivation methods for airborne infectious aerosols in the indoor environment, which is crucial when selecting the most effective infection control technologies. The problem is that the large variation in viral load between individuals makes the Wells-Riley model output very sensitive to the input parameters and may yield a flawed prediction of risk. The absolute infection risk estimated with this model can range from nearly 0 % to 100 % depending on the viral load, even when all other factors, such as removal mechanisms and room geometry, remain unchanged. We therefore propose a novel method that removes this sensitivity to viral load. We define a quanta-independent maximum absolute before-after difference in infection risk that is independent of quanta factors like viral load, physical activity, or the dose-response relationships. The input data needed for a non-steady-state calculation are just the removal rates, room volume, and occupancy duration. Under steady-state conditions the approach provides an elegant solution that is only dependent on removal mechanisms before and after applying infection control measures. We applied this method to compare the impact of relative humidity, ventilation rate and its effectiveness, filtering efficiency, and the use of ultraviolet germicidal irradiation on the infection risk. The results demonstrate that the method provides a comprehensive understanding of the impact of infection control strategies on the risk of airborne infection, enabling rational decisions to be made regarding the most effective strategies in a specific context. The proposed method thus provides a practical tool for mitigation of airborne infection risk.

The impact of bioaerosol trajectories on microbial community assembly and physicochemical dynamics in the atmosphere.

This study explored the assembly mechanisms and physicochemical dynamics of microbial communities within atmospheric bioaerosols, focusing on the influence of different aerial trajectories. Over two years, samples near Seoul were classified into 'North', 'Southwest', and 'Others' categories based on their aerial trajectories. Physicochemical analysis of the PM2.5 particles revealed distinct ion compositions for each cluster, reflecting diverse environmental influences. Microbial community analysis revealed that shared dominant bacterial phyla were present in all clusters. However, distinct taxonomic profiles and biomarkers were also evident, such as coastal bacteria in the 'Southwest' cluster correlating with wind speed, and arid soil-originated bacteria in the 'North' cluster correlating with cations. These findings demonstrate that biomarkers in each cluster are representative of the distinct environments associated with their aerial trajectories. Notably, cluster 'Southwest' the highest microbial diversity and a strong alignment with the neutral community model, suggesting a large influence of passive dispersal from marine environments. Contrarily, 'North' and 'Others' were more influenced by niche-dependent factors. This study highlights the complex interplay between environmental factors and microbial dynamics in bioaerosols and provides important insights for environmental monitoring and public health risk assessment.

Australian Black summer smoke signal on Antarctic aerosol collected between New Zealand and the Ross sea.

Open biomass burning (BB) events are a well-known primary aerosol source, resulting in the emission of significant amount of gaseous and particulate matter and affecting Earth's radiation budget. The 2019-2020 summer, known as "Australian Black Summer", showed exceptional duration and intensity of seasonal wildfires, triggered by high temperatures and severe droughts. Since increasing megafires are predicted due to expected climate changes, it is critical to study the impact of BB aerosol on a large scale and evaluate related transport processes. In this study, five aerosol samples (total suspended particles with a diameter >1 µm) were collected during the XXXV Italian Expedition in Antarctica on board of the R/V Laura Bassi from 6th of January to February 16, 2020, along the sailing route from Lyttelton harbor (New Zealand) to Terra Nova Bay (Antarctica). Levoglucosan and its isomers have been analyzed as markers of BB, together with polycyclic aromatic hydrocarbons (PAHs), sucrose and alcohol sugars. Ionic species and carboxylic acids have been analyzed to support the identification of aerosol sources and its aging. Results showed high levoglucosan concentrations (325-1266 pg m-3) during the campaign, suggesting the widespread presence of smoke in the region, because of huge wildfire releases. Backward trajectories indicated the presence of long-range atmospheric transport from South America, probably carrying wildfires plume, in agreement with literature. Regional sources have been suggested for PAHs, particularly for 3-4 rings' compounds; monosaccharides, sucrose, arabitol, and mannitol were related to marine and biogenic contributions. In a warming climate scenario, more frequent and extensive wildfire episodes are expected in Australia, potentially altering albedo, aerosol radiative properties, and cloud interactions. Therefore, it is crucial to strengthens the investigations on the regional climatic effects of these events in Antarctica.

A traffic-induced shift of ultrafine particle sources under COVID-19 soft lockdown in a subtropical urban area.

During the unprecedented COVID-19 city lockdown, a unique opportunity arose to dissect the intricate dynamics of urban air quality, focusing on ultrafine particles (UFPs) and volatile organic compounds (VOCs). This study delves into the nuanced interplay between traffic patterns and UFP emissions in a subtropical urban setting during the spring-summer transition of 2021. Leveraging meticulous roadside measurements near a traffic nexus, our investigation unravels the intricate relationship between particle number size distribution (PNSD), VOCs mixing ratios, and detailed vehicle activity metrics. The soft lockdown era, marked by a 20-27% dip in overall traffic yet a surprising surge in early morning motorcycle activity, presented a natural experiment. We observed a consequential shift in the urban aerosol regime: the decrease in primary emissions from traffic substantially amplified the role of aged particles and secondary aerosols. This shift was particularly pronounced under stagnant atmospheric conditions, where reduced dilution exacerbated the influence of alternative emission sources, notably solvent evaporation, and was further accentuated with the resumption of normal traffic flows. A distinct seasonal trend emerged as warmer months approached, with aromatic VOCs such as toluene, ethylbenzene, and xylene not only increasing but also significantly contributing to more frequent particle growth events. These findings spotlight the criticality of targeted strategies at traffic hotspots, especially during periods susceptible to weak atmospheric dilution, to curb UFP and precursor emissions effectively. As we stand at the cusp of widespread vehicle electrification, this study underscores the imperative of a holistic approach to urban air quality management, embracing the complexities of primary emission reductions and the resultant shifts in atmospheric chemistry.

Isolating pollen signals from laser diode aerosol Optical Particle Counter (OPC) data through positive matrix factorization (PMF) and Unmix receptor models.

Pollen, a significant natural bioaerosol and allergen for sensitized individuals, is expected to increase in prevalence due to climate change. Mitigating allergy symptoms involves avoiding pollen exposure and pre-medication, emphasizing the importance of real-time knowledge of localized ambient air pollen concentrations. Laser diode Optical Particle Counters (OPCs) are commonly used for monitoring particle number concentrations in ambient air. This study explores the hypothesis that OPCs can monitor pollen but may struggle to distinguish them from other particles. We aimed to isolate the pollen signal from collective particle number concentrations using source apportionment models, specifically Positive Matrix Factorization (PMF) and Unmix, applied to multiple bin OPC data. The pollen signals isolated using PMF show slightly better correlation values than those isolated using Unmix. PMF-derived pollen signals exhibit strong correlations with Holoptelea (r = 0.64) and total pollen (r = 0.54) concentrations, while a moderate correlation is observed with Poaceae (r = 0.47). Exclusion of low pollen events strengthens correlations for Holoptelea and Poaceae to very strong (r = 0.87) and strong (r = 0.67), respectively. Although both model types effectively isolate the pollen signal, metrics suggest that Unmix has the potential for more accurate predictions of both moderate and extreme pollen events simultaneously. The Mean Absolute Error (MAE), Root Mean Square Error (RMSE), and Relative Root Mean Square Error (RRMSE) metrics for Holoptelea are 46.2 grains m-3, 72.4 grains m-3, and 15.3; for Poaceae, 3.9 grains m-3, 4.9 grains m-3, and 13.0; and for total pollen, 43.5 grains m-3, 72.1 grains m-3, and 14.1. This study represents a significant development in the use of source apportionment models and ambient OPCs for real-time pollen monitoring, offering a cost-effective alternative to conventional automated pollen sensors. Despite challenges, the proposed methodology provides a practical and accessible solution for pollen monitoring, contributing to the advancement of bioaerosol monitoring technologies.

Retrieval of high-resolution aerosol optical depth (AOD) using Landsat 8 imageries over different LULC classes over a city along Indo-Gangetic Plain, India.

Aerosol optical depth (AOD) serves as a crucial indicator for assessing regional air quality. To address regional and urban pollution issues, there is a requirement for high-resolution AOD products, as the existing data is of very coarse resolution. To address this issue, we retrieved high-resolution AOD over Kanpur (26.4499°N, 80.3319°E), located in the Indo-Gangetic Plain (IGP) region using Landsat 8 imageries and implemented the algorithm SEMARA, which combines SARA (Simplified Aerosol Retrieval Algorithm) and SREM (Simplified and Robust Surface Reflectance Estimation). Our approach leveraged the green band of the Landsat 8, resulting in an impressive spatial resolution of 30 m of AOD and rigorously validated with available AERONET observations. The retrieved AOD is in good agreement with high correlation coefficients (r) of 0.997, a low root mean squared error of 0.035, and root mean bias of - 4.91%. We evaluated the retrieved AOD with downscaled MODIS (MCD19A2) AOD products across various land classes for cropped and harvested period of agriculture cycle over the study region. It is noticed that over the built-up region of Kanpur, the SEMARA algorithm exhibits a stronger correlation with the MODIS AOD product compared to vegetation, barren areas and water bodies. The SEMARA approach proved to be more effective for AOD retrieval over the barren and built-up land categories for harvested period compared with the cropping period. This study offers a first comparative examination of SEMARA-retrieved high-resolution AOD and MODIS AOD product over a station of IGP.

Evaluation of pathogen spread risk from excavated landfill.

Landfill is a huge pathogen reservoir and needs special attention. Herein, the distribution and spread risk of pathogen were assessed in excavated landfill scenario. The results show that landfill excavation will greatly increase the risk of environmental microbial contamination. The highest total concentration of culturable bacteria among landfill refuse, topsoil and plant leaves was found to be as high as 1010 CFU g-1. Total coliforms, Hemolytic bacteria, Staphylococcus aureus, Salmonella, Enterococci, and Fecal coliforms were detected in the landfill surrounding environment. Notably, pathogens were more likely to adhere to plant leaves, making it an important source of secondary pathogens. The culturable bacteria concentration in the air samples differed with the landfill zone with different operation status, and the highest culturable bacteria concentration was found in the excavated area of the landfill (3.3 × 104 CFU m-3), which was the main source of bioaerosol release. The distribution of bioaerosols in the downwind outside of the landfill showed a tendency of increasing and then decreasing, and the highest concentration of bioaerosols outside of the landfill (6.56 × 104 CFU m-3) was significantly higher than that in the excavated area of the landfill. The risk of respiratory inhalation was the main pathway leading to infection, whereas the HQin (population inhalation hazardous quotient) at 500 m downwind the excavation landfill was still higher than 1, indicating that the neighboring residents were exposed to airborne microbial pollutants. The results of the study provide evidence for bioaerosols control protective measures taken to reduce health risk from the excavated landfill.

Online quantification of nicotine in e-cigarette aerosols by vacuum ultraviolet photoionization mass spectrometry.

The growing popularity of e-cigarettes and the associated risks of nicotine addiction present a new challenge to global public health security. Measuring the nicotine levels in e-cigarette aerosols is essential to assess the safety of e-cigarettes. In this study, a rapid in situ method was developed for online quantification of nicotine in e-cigarette aerosols by using a homemade vacuum ultraviolet photoionization aerosol mass spectrometer (VUV-AMS). E-cigarette liquids with different nicotine concentrations were prepared to generate aerosols containing different levels of nicotine, which were employed as the calibration sources for nicotine quantification by VUV-AMS. The results showed that the mass concentration of nicotine in e-cigarette aerosols has a good linear relationship with its signal intensity in the mass spectrum, and the limits of detection and quantitation of nicotine by VUV-AMS were found to be 2.0 and 6.2 µg per puff respectively. Then the online method was utilized to measure five commercial e-cigarettes, and their nicotine yields were determined to be between 31 and 188 µg per puff with the nicotine fluxes from 7.7 to 70 µg s-1, agreeing with the results of the gas chromatography with a flame ionization detector (GC-FID). This study demonstrated the feasibility and advantages of VUV-AMS for quick quantification of nicotine in e-cigarette aerosols within seconds.

Chemical composition and source apportionment of ambient PM2.5 in a coastal urban area, Northern Poland.

Coastal urban areas impact atmospheric chemistry and air quality through various sources, interactions, and processes. This study examines the mass concentrations of fine mode (PM2.5) aerosol and its major and trace components (Al, As, Ba, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mo, Mn, Na, Ni, Pb, Sb, Se, Sr, Te, Ti, Tl, V, Zn). The comprehensive field measurements were conducted in Poland between September 2019 and May 2020. Seasonal distribution and drivers of these pollutants showed considerable variability. In winter, higher concentrations were observed for Pb, Co, and As due to the higher contribution of pyrogenic emission. The Principal Component Analysis provided evidence of anthropogenic sources of trace species associated with coal combustion by industry/power plants, brake wear-related emissions, vehicle emissions, shipping activities, road-resuspended dust, and urban construction activities. These results showed that major chemical elements (Ca, Na, Fe, Mg, Al, and K) contributed to 4.07-34.0% of all components. Se, Zn, and Br contributed 1.29%, 1.25%, and 1.04%, respectively, while other tracers ranged between 0.07% and 0.95%. The diagnostic ratio of V/Ni remained stable between 0.45 and 0.46 during the cold season, then increased in spring, indicating that ship emissions were an important source of these metals during the warm season.

Aerosol influence on cloud macrophysical and microphysical properties over the Tibetan Plateau and its adjacent regions.

This study uses aerosol optical depth (AOD) and cloud properties data to investigate the influence of aerosol on the cloud properties over the Tibetan Plateau and its adjacent regions. The study regions are divided as the western part of the Tibetan Plateau (WTP), the Indo-Gangetic Plain (IGP), and the Sichuan Basin (SCB). All three regions show significant cloud effects under low aerosol loading conditions. In WTP, under low aerosol loading conditions, the effective radius of liquid cloud particles (LREF) decreases with the increase of aerosol loading, while the effective radius of ice cloud particles (IREF) and cloud top height (CTH) increase during the cold season. Increased aerosol loading might inhibit the development of warm rain processes, transporting more cloud droplets above the freezing level and promoting ice cloud development. During the warm season, under low aerosol loading conditions, both the cloud microphysical (LREF and IREF) and macrophysical (cloud top height and cloud fraction) properties increase with the increase of aerosol loading, likely due to higher dust aerosol concentration in this region. In IGP, both LREF and IREF increase with the increase in aerosol loading during the cold season. In SCB, LREF increases with the increase in aerosol loading, while IREF decreases, possibly due to the higher hygroscopic aerosol concentration in the SCB during the cold season. Meteorological conditions also modulate the aerosol-cloud interaction. Under different convective available potential energy (CAPE) and relative humidity (RH) conditions, the influence of aerosol on clouds varies in the three regions. Under low CAPE and RH conditions, the relationship between LREF and aerosol in both the cold and warm seasons is opposite in the WTP: LREF decreases with the increase of aerosol in the cold season, while it increases in the warm season. This discrepancy may be attributed to a difference in the moisture condition between the cold and warm seasons in this region. In general, the influence of aerosols on cloud properties in TP and its adjacent regions is characterized by significant nonlinearity and spatial variability, which is likely related to the differences in aerosol types and meteorological conditions between different regions.

Unveiling the airborne microbial menace: Novel insights into pathogenic bacteria and fungi in bioaerosols from nursery schools to universities.

Bacterial and fungal aerosol pollution is widespread in indoor school environments, and poses potential health risks to students and staff. Understanding the distribution and diversity of microbial communities within aerosols is crucial to mitigate their adverse effects. Existing knowledge regarding the composition of bacterial and fungal aerosols, particularly the presence of potential pathogenic microorganisms in fine particulate matter (PM2.5) from nursery schools to universities, is limited. To bridge this knowledge gap, in the present study, we collected PM2.5 samples from five types of schools (i.e., nursery schools, primary schools, junior schools, and high schools and universities) in China. We used advanced single-molecule real-time sequencing to analyze the species-level diversity of bacterial and fungal components in PM2.5 samples based on 16S and ITS ribosomal genes, respectively. We found significant differences in microbial diversity and community composition among the samples obtained from different educational institutions and pollution levels. In particularly, junior schools exhibited higher PM2.5 concentrations (62.2-86.6 µg/m3) than other schools (14.4-48.4 µg/m3). Moreover, microbial variations in PM2.5 samples were associated with institution type. Notably, the prevailing pathogenic microorganisms included Staphylococcus aureus, Staphylococcus epidermidis, Staphylococcus haemolyticus, Streptococcus pneumoniae, and Schizophyllum commune, all of which were identified as Class II Pathogenic Microorganisms in school settings. Four potentially novel strains of S. commune were identified in PM2.5 samples collected from the university; the four strains showed 92.4 %-94.1 % ITS sequence similarity to known Schizophyllum isolates. To the best of our knowledge, this is the first study to explore bacterial and fungal diversity within PM2.5 samples from nursery schools to universities. Overall, these findings contribute to the existing knowledge of school environmental microbiology to ensure the health and safety of students and staff and impacting public health.

Size-resolved aerosol at a Coastal Great Lakes Site: Impacts of new particle formation and lake spray.

The quantification of aerosol size distributions is crucial for understanding the climate and health impacts of aerosols, validating models, and identifying aerosol sources. This work provides one of the first continuous measurements of aerosol size distribution from 1.02 to 8671 nm near the shore of Lake Michigan. The data were collected during the Lake Michigan Ozone Study (LMOS 2017), a comprehensive air quality measurement campaign in May and June 2017. The time-resolved (2-min) size distribution are reported herein alongside meteorology, remotely sensed data, gravimetric filters, and gas-phase variables. Mean concentrations of key aerosol parameters include PM2.5 (6.4 µg m-3), number from 1 to 3 nm (1.80x104 cm-3) and number greater than 3 nm (8x103 cm-3). During the field campaign, approximately half of days showed daytime ultrafine burst events, characterized by particle growth from sub 10 nm to 25-100 nm. A specific investigation of ultrafine lake spray aerosol was conducted due to enhanced ultrafine particles in onshore flows coupled with sustained wave breaking conditions during the campaign. Upon closer examination, the relationships between the size distribution, wind direction, wind speed, and wave height did not qualitatively support ultrafine particle production from lake spray aerosol; statistical analysis of particle number and wind speed also failed to show a relationship. The alternative hypothesis of enhanced ultrafine particles in onshore flow originating mainly from new particle formation activity is supported by multiple lines of evidence.

VOC source apportionment, reactivity, secondary transformations, and their prioritization using fuzzy-AHP method in a coal-mining city in India.

This study assessed the air quality status in different functional zones of Dhanbad-a coal-mining and industrial hub, based on the measurement of aromatic and halogenated volatile organic compounds (VOCs) using gas chromatography. The study encompasses source apportionment of VOCs and their chemical reactivity in terms of OH radical loss rate (LOH), ozone-forming potential (OFP), and their secondary organic aerosol forming potential (SOAp). Furthermore, prioritization of VOCs based on a fuzzy-analytical hierarchical process (F-AHP) has also been done. The results found xylene species to have the highest concentration in all three seasons across traffic-intersection and industrial zones and toluene at the institutional zone. The study identified four sources using positive matrix factorization (PMF) model, viz., mixed traffic exhaust (35%), coal combustion sources (30%), industrial (26%), and solvent usage (9%). LOH and SOAp were ~ 16 times more at the industrial and traffic-intersection zone than the institutional zone. The aromatic species contributed 97% to the OFP, and many species exhibited less contribution to the mixing ratio of VOCs but displayed a high contribution to LOH, OFP, and SOAp, suggesting the need to prefer reactivity-based strategies in addition to concentration-based strategies in the future for their regulation. The F-AHP-based priority component analysis identified 16 species out of 29 in the priority watch list (nine in tier-1, four in tier-2, and three in tier-3). The paucity of data and lack of ambient air quality standards on VOCs (except benzene) make it difficult to determine which aspect should be dealt with first and which species require more attention. Therefore, the F-AHP method used in this study could help identify the influencing parameters to be considered while devising efficient VOC management policies.

Characteristics of typical intermediate and semi volatile organic compounds in Shanghai during China International Import Expo event.

To ensure good air quality during the China International Import Expo (CIIE) event, stringent emission-reduction measures were implemented in Shanghai. To assess the efficacy of these measures, this study measured typical categories of intermediate/semi volatile organic compounds (I/SVOCs), including alkanes (C10-C26 n-alkanes and pristane), EPA-priority polycyclic aromatic hydrocarbons (PAHs), alkylnaphthalenes, benzothiazole (BTH) and chlorobenzenes (CBs), at an urban site of Shanghai before and during two CIIE events (2019 and 2020; non-CIIE versus CIIE). The average concentrations of alkanes and PAHs during both 2019 and 2020 CIIE events decreased by approximately 41% and 17%, respectively, compared to non-CIIE periods. However, the decline in BTH and CBs was only observed during CIIE-2019. Secondary organic aerosol (SOA) formation from alkanes, PAHs and BTH was evaluated under atmospheric conditions, revealing considerable SOA contributions from dimethylnaphthalenes and BTH. Positive matrix factorization (PMF) analysis further revealed that life-related sources, such as cooking and residential emissions, make a noticeable contribution (21.6%) in addition to the commonly concerned gasoline-vehicle sources (31.5%), diesel-related emissions (20.8%), industrial emissions (18.6%) and ship emissions (7.5%). These findings provide valuable insights into the efficacy of the implemented measures in reducing atmospheric I/SVOCs levels. Moreover, our results highlight the significance of exploring additional individual species of I/SVOCs and life-related sources for further research and policy development.

Organic tracers in fine and coarse aerosols at an urban Mediterranean site: contribution of biomass burning and biogenic emissions.

The concentrations of anhydrosugars (levoglucosan, mannosan, and galactosan), polyols (inositol, xylitol, sorbitol, and mannitol), and glucose were measured in PM1 and PM10 samples collected during 1 year at a traffic site in the city of Elche (southeastern Spain). Levoglucosan, mannosan, and galactosan were mainly found in the PM1 fraction since they are mainly emitted from biomass burning (BB). Likewise, inositol, xylitol, and sorbitol were primarily distributed in the fine mode, suggesting a non-negligible contribution from anthropogenic sources (specifically BB) to the levels of these compounds. This was supported by their seasonal variations, with higher concentrations during winter, and their correlations with levoglucosan concentrations. The average contributions of biomass burning and biogenic sources to OC and PM levels were calculated using levoglucosan and mannitol, respectively, as tracers. On average, BB accounted for 12% and 16% of the OC in PM1 and PM10, while the estimated contribution of fungal spores to OC and PM10 levels was 1.2 and 0.8%, respectively. The results of the present study suggest that, at least in the study area, most sugar alcohols are not appropriate tracers of biogenic emissions.